Unable to log into SA540 as any user

This is the 2nd time that this has happened. I am unable to log in my SA540 as any user including the Admin either through the SSL VPN portal or directly connected to the box. The fix is to reboot the device and it starts working but I as I am not on-site all the time, this is a problem. I recently upgraded the firmware to 1.1.65.
Has anyone else experienced this issue and if so, how can it be resolved?
Thanks

HI Mark,
Could you please collect the log when this happens again.
To collect logs from the SA520 router. Please log in to the SA520 router and
in the URL type with IP address https://IP_address_of_SA520/scgi-bin/dbglog.cgi
thanks
wei

Similar Messages

Unable to log into plus as apps user

I have created an APPS EUL using instructions provided by link: Armstrong-Smith Consulting and am able to log into Discoverer Administrator as SYSADMIN and administer the EUL that was created under a DB Account.
I gave administrative rights for a business area to an apps user.
I am trying to log into Discoverer Plus and/or Viewer using the apps user account with administrative rights to the business in the EUL above and am getting the following error;
<p>
<strong>Error</strong>
A connection error has occurred.
-Unable to connect, possibly due to an invalid Applications GWYUID setting. Please contact your Discoverer manager.
How do I go about connecting to the APPS EUL or am I approaching this the wrong way? The end goal is to set up end users who can use this EUL to create reports for our facility.
Apps Version 12.0.x
DB Version 12.x
E-business Suite
</p>

Hi
Is this Kevin? :-)
If so, I sent you an answer in an email. If this is not Kevin, here is a possible solution:
It sounds like your APPLSYSPUB account has a different password to the standard PUB. Because of this you will need to change this setting inside your pref.txt file.
If you look in this folder: *$ORACLE_HOME\Discoverer\Util* you will see a file called pref.txt. Edit that file and look for the GWYUID setting and change the password to match what you have inside Admin.
After you have edited the file, save it then from the same folder execute the file called applypreferences. On Windows it is a BAT file, on Linux and Unix it is an SH file.
After you have applied the privileges you need to stop and restart the Discoverer server using opmnctl shutdown followed by opmnctl startall when run from the *$ORACLE_HOME\opmn\bin folder*.
This should do it.
Best wishes
Michael

Report to know the Spent Time Logged into SOD by any user

Hi gurus
Is it possible that we can create a report to know how much time has been spent by user into CRMOD. For eg someone logs every day 10 minutes .If he logs for 15 days in a month , then the report should show 150 minutes. Is this possible
Waiting for feedback

I guess you will have to raise a request with Oracle to make available User tracking subject area using which you can generate your report.
We had implemented this in one of our instances. You will find various metrics in that subject area that will cater to your needs.
Alternately you can also do it through web service.

Application user RMCM was found to be deleted from CUCM but agents unable to log into ACD queue was reported 2 weeks later

Hello All, During an investigation Application user RMCM was found to be deleted from CUCM as per CUCM logs but the first issue of agents unable to log into ACD queue was reported 2 weeks later following a publisher reboot, I am trying to understand what could have caused this ? The reboot obviously could not have made any changes but the logs says RMCM users deleted on 09 May but issue was reported on 20 May and in the meantime services were said to be working without interruption . Can i have some suggestion to understand this to explain customer ?

The RMCM user being deleted might not have triggered a JTAPI update on the UCCX side. The publisher reboot which restarted CTIManager would have definitely triggered the update and forced UCCX to re-authenticate with the now non-existent user.

Why am I unable to log into any google accounts

why am I unable to log into any google accounts

goldie530 wrote:
why am I unable to log into any google accounts
You may have been infected by malware that you downloaded and installed. The download was probably called "FlashPlayer.pkg". If you still have it please don't trash it quite yet. For the benefit of others in this community can you please upload it to http://www.virustotal.com. Once you have done that copy the ID and report it back here along with the exact name of the file that you uploaded.
If the results do not show anything in the status column next to ClamAV can you also upload it to http://cgi.clamav.net/sendvirus.cgi and in the description box include the keyword "macos". If you know the name of the site where you downloaded it from, that would also be useful. Then you should trash it so you won't be tempted to run it again.
A description of this malware along with instructions on fixing it can be found here: http://www.f-secure.com/v-descs/trojan_bash_qhost_wb.shtml
Thanks in advance and let us know how it goes.

Unable to log into the user management administration web console

Can someone tell how resolve my ablity to log into the user management administration web console? I can't log into SAP Netweaver Admin, User managment, and Webdynpro content Administrator and Web Dynpro Consol. But able active j2ee engine sample? Is there some that I need activate to allow me log in?
http://localhost:50000/logon/logonServlet?redirectURL=%2Fuseradmin%2FuserAdminServlet%3FgotoDefaultPage%3D.

Hi,
I had this problem also. For me it worked to log on to the SLD and then I was able to log on to the other applications like Useradmin and NWA.
The SLD is usually available at <a href="http://localhost:50000/sld">http://localhost:50000/sld</a>.
Regards,
Sebastian

Unable to log in as a regular user after a reboot

Hello Everybody,
I have a SPARC SunBlade 2000 with 2 GB of memory running Solaris 10 with the following configuration:
root@auyantepui # cat /etc/release
                       Solaris 10 5/09 s10s_u7wos_08 SPARC
           Copyright 2009 Sun Microsystems, Inc. All Rights Reserved.
                        Use is subject to license terms.
                             Assembled 30 March 2009
root@auyantepui # uname -a
SunOS auyantepui 5.10 Generic_139555-08 sun4u sparc SUNW,Sun-Blade-1000
root@auyantepui # I had an instance of Oracle 11g running without too much activity and I was just finishing installing Weblogic 10 Application Server in the same system,
when the system got extremely slow that became pretty much unresponsive.
As soon as I could in a terminal window I typed init 5 to bring the system down.
Since I brought the system up I have been unable to log in as me user "morillo" or user "oracle".
I can only log into the system as user "root".
root@auyantepui # su - morillo
su: No shell
root@auyantepui #
root@auyantepui #
root@auyantepui #
root@auyantepui # su - oracle
su: No shell
root@auyantepui #Obviously I have a shell for both users in /etc/passwd
root@auyantepui # cat /etc/passwd
root:x:0:0:Super-User:/:/sbin/sh
daemon:x:1:1::/:
bin:x:2:2::/usr/bin:
sys:x:3:3::/:
adm:x:4:4:Admin:/var/adm:
lp:x:71:8:Line Printer Admin:/usr/spool/lp:
uucp:x:5:5:uucp Admin:/usr/lib/uucp:
nuucp:x:9:9:uucp Admin:/var/spool/uucppublic:/usr/lib/uucp/uucico
smmsp:x:25:25:SendMail Message Submission Program:/:
listen:x:37:4:Network Admin:/usr/net/nls:
gdm:x:50:50:GDM Reserved UID:/:
webservd:x:80:80:WebServer Reserved UID:/:
postgres:x:90:90:PostgreSQL Reserved UID:/:/usr/bin/pfksh
svctag:x:95:12:Service Tag UID:/:
nobody:x:60001:60001:NFS Anonymous Access User:/:
noaccess:x:60002:60002:No Access User:/:
nobody4:x:65534:65534:SunOS 4.x NFS Anonymous Access User:/:
morillo:x:33353:10:Carlos A. Morillo:/home/morillo:/bin/csh
oracle:x:100:102:Oracle DBA:/auyantepui/oracle:/bin/csh
apache:x:101:101:Oracle Apache:/auyantepui/apache:/bin/csh
root@auyantepui #
root@auyantepui #
root@auyantepui #
root@auyantepui # ls -l /bin/csh
-r-xr-xr-x   2 root     bin       151456 Aug 8 2006 /bin/csh
root@auyantepui # file /bin/csh
/bin/csh:       ELF 32-bit MSB executable SPARC Version 1, dynamically linked, stripped
root@auyantepui # Only including the last part of the truss output:
1557:   fstat64(4, 0xFFBFE1D0)                          = 0
1557:   ioctl(4, TCGETA, 0xFFBFE2B4)                    Err#25 ENOTTY
1557:   write(4, " S U   0 7 / 1 2   1 1 :".., 36)      = 36
1557:   close(4)                                        = 0
1557:   setgid(10)                                      = 0
1557:   sysconfig(_CONFIG_NGROUPS)                      = 16
1557:   open("/etc/default/nss", O_RDONLY|O_LARGEFILE) = 4
1557:   fcntl(4, F_DUPFD, 0x00000100)                   Err#22 EINVAL
1557:   read(4, " #   i d e n t\t " @ ( #".., 1024)     = 749
1557:   read(4, 0xFF342400, 1024)                       = 0
1557:   close(4)                                        = 0
1557:   getuid()                                        = 0 [0]
1557:   getuid()                                        = 0 [0]
1557:   door_info(3, 0xFFBFE9B8)                        = 0
1557:   door_call(3, 0xFFBFEA60)                        = 0
1557:   setgroups(2, 0x0002C248)                        = 0
1557:   setuid(33353)                                   = 0
1557:   chdir("/home/morillo")                          = 0
1557:   munmap(0xFF060000, 4458)                        = 0
1557:   munmap(0xFF072000, 544)                         = 0
1557:   munmap(0xFF010000, 11897)                       = 0
1557:   munmap(0xFF024000, 948)                         = 0
1557:   munmap(0xFEFF0000, 10532)                       = 0
1557:   munmap(0xFF004000, 1298)                        = 0
1557:   munmap(0xFEFD0000, 14306)                       = 0
1557:   munmap(0xFEFE4000, 1494)                        = 0
1557:   munmap(0xFEFA0000, 129457)                      = 0
1557:   munmap(0xFEFC0000, 7432)                        = 0
1557:   munmap(0xFEF80000, 13029)                       = 0
1557:   munmap(0xFEF94000, 1592)                        = 0
1557:   munmap(0xFEF50000, 125737)                      = 0
1557:   munmap(0xFEF70000, 4824)                        = 0
1557:   munmap(0xFEF30000, 38927)                       = 0
1557:   munmap(0xFEF4A000, 1860)                        = 0
1557:   munmap(0xFEF10000, 4760)                        = 0
1557:   munmap(0xFEF22000, 988)                         = 0
1557:   munmap(0xFF030000, 54114)                       = 0
1557:   munmap(0xFF04E000, 5104)                        = 0
1557:   sigaction(SIGXCPU, 0xFFBFF048, 0xFFBFF0E8)      = 0
1557:   sigaction(SIGXFSZ, 0xFFBFF048, 0xFFBFF0E8)      = 0
1557:   execve("/bin/csh", 0xFFBFF118, 0x000268A0)      Err#13 EACCES [file_dac_search]
1557:   fstat64(2, 0xFFBFE1E8)                          = 0
su: 1557:       write(2, " s u : ", 4)                         = 4
No shell1557:   write(2, " N o   s h e l l", 8)                 = 8
1557:   write(2, "\n", 1)                               = 1
1557:   _exit(3)
auyantepui#
{code}
Checking the Err#13 EACCES [file_dac_search] in /usr/include/sys/errno.h I have
{code}errno.h:#define EACCES 13      /* Permission denied                    */{code}
I suspect file_dac_search has to do with process privileges and the "Least Privilege" Security framework
introduced with Solaris 10.
Any ideas? Suggestions? Recommendations how to fix this?
There has to be some way to restore the default privileges I had before the reboot.
I guess something got corrupted during the reboot.
Thanks in advance,
Carlos.

>
Just as an FYI OpenSolaris build 134 uses the automounter to mount /export/home to /home and /home is actually being written to /etc/passwd. So if you're still in the habit of telling Linux admins to disable the automounter please stop.
[http://opensolaris.org/jive/thread.jspa?messageID=482048&#482048|http://opensolaris.org/jive/thread.jspa?messageID=482048&#482048]
alanNever was in that habit. My automounter is not disabled and is configured as such. I don't think it was that way out of the box, however. Dunno about OpenSolaris. The SMC, whenever you make changes to a user account, still overwrites your home directory of "/export/home/userid" with "/home/userid", and this will prevent you from logging in. If you use the SMC you need to go back and change the home directory; I don't know if they created patches in the past year to correct this since I quit using it, that being one of the reasons.

Unable to log into the portal-After Upgrade from NetWeaver 7.0 to 7.3EHP1

Dear Experts,
We have poltal landscape(NW 7.0 Dualstack SPS27) with our customozed themes and par files(Company name,logos and colours)
Recently we upgraded the one of portal from NW 7.0 to NW 7.3EHP1 . Upgrade has been successfilly completed with small issue.
After upgrade all urls are working(/nwa, /sld) except /irj/portal.We know that NW 7.3 EHp1 accepts only ear file i.e we converted the our customized log on par file to ear file through par migration tool and the same was deployed successfully through NWDS 7.3 version.After deploying we are able to access the
/irj/portal url with our customized par(means ear file) without issues,
We are unable to log into the portal after giving the correct user id and password,getting the portal runtime error as foloows.
Portal runtime error
An exception occured while processing your request.Send the exception ID your administrator
Exception id:
see log files for details about this exception
Default.trc log file(/server0/log)
#EP-PIN-PRT#tc~epbc~prtc~api#C00061FD2733006C00000005000056CB#9034950000000004#sap.com/com.sap.portal.runtime.system.hooks#com.sap.portal.prt.
runtime#J2EE_ADMIN#4##43E00B85A79911E380F800000089DCC6#3a483a0fa79911e3903000000089dcc6#3a483a0fa79911e3903000000089dcc6#0#Thread[HTTP Worker
[@900472845],5,Dedicated_Application_Thread]#Plain##
08:14_09/03/14_0005_9034950
[EXCEPTION]
java.lang.RuntimeException: Could not create Resource Repository root folder in PCD
at com.sap.portal.resource.repository.ResourceRepositorySrv.initRepositoryRootContext(ResourceRepositorySrv.java:140)
at com.sap.portal.resource.repository.ResourceRepositorySrv.init(ResourceRepositorySrv.java:93)
at com.sap.portal.prt.core.RequestDispatcherFactory$ServiceRequestDispatcher$3.service(RequestDispatcherFactory.java:518)
at com.sap.engine.services.servlets_jsp.server.deploy.impl.module.IRequestDispatcherImpl.dispatch(IRequestDispatcherImpl.java:363)
at com.sap.portal.prt.core.RequestDispatcherFactory$ServiceRequestDispatcher.init(RequestDispatcherFactory.java:503)
at com.sap.portal.prt.broker.PortalServiceItem.initServiceInstance(PortalServiceItem.java:347)
at com.sap.portal.prt.broker.PortalServiceItem.getServiceInstance(PortalServiceItem.java:210)
at com.sap.portal.prt.broker.PortalServiceItem.load(PortalServiceItem.java:578)
at com.sap.portal.prt.om.ObjectsManager.createObejctHandle(ObjectsManager.java:234)
at com.sap.portal.prt.om.ObjectsManager.getObjectHandle(ObjectsManager.java:147)
at com.sap.portal.prt.broker.PortalAppBroker.getPortalService(PortalAppBroker.java:498)
at com.sap.portal.prt.service.ServiceManager.getPortalServiceItem(ServiceManager.java:431)
at com.sap.portal.prt.service.ServiceManager.get(ServiceManager.java:220)
at com.sap.portal.prt.runtime.Portal$RuntimeResources.getService(Portal.java:130)
at com.sap.portal.resource.repository.WebResourceRepositorySrv.init(WebResourceRepositorySrv.java:71)
at com.sap.portal.prt.core.RequestDispatcherFactory$ServiceRequestDispatcher$3.service(RequestDispatcherFactory.java:518)
at com.sap.engine.services.servlets_jsp.server.deploy.impl.module.IRequestDispatcherImpl.dispatch(IRequestDispatcherImpl.java:363)
at com.sap.portal.prt.core.RequestDispatcherFactory$ServiceRequestDispatcher.init(RequestDispatcherFactory.java:503)
at com.sap.portal.prt.broker.PortalServiceItem.initServiceInstance(PortalServiceItem.java:347)
at com.sap.engine.services.servlets_jsp.server.deploy.impl.module.IRequestDispatcherImpl.dispatch(IRequestDispatcherImpl.java:363)
at com.sap.portal.prt.core.RequestDispatcherFactory$ServiceRequestDispatcher.init(RequestDispatcherFactory.java:503)
at com.sap.portal.prt.broker.PortalServiceItem.initServiceInstance(PortalServiceItem.java:347)
        at com.sap.portal.prt.broker.PortalServiceItem.getServiceInstance(PortalServiceItem.java:210)
        at com.sap.portal.prt.broker.PortalServiceItem.load(PortalServiceItem.java:578)
        at com.sap.portal.prt.om.ObjectsManager.createObejctHandle(ObjectsManager.java:234)
        at com.sap.portal.prt.om.ObjectsManager.getObjectHandle(ObjectsManager.java:147)
        at com.sap.portal.prt.broker.PortalAppBroker.getPortalService(PortalAppBroker.java:498)
        at com.sap.portal.prt.service.ServiceManager.getPortalServiceItem(ServiceManager.java:431)
        at com.sap.portal.prt.service.ServiceManager.get(ServiceManager.java:220)
        at com.sap.portal.prt.runtime.Portal$RuntimeResources.getService(Portal.java:130)
        at com.sap.portal.resource.repository.WebResourceImportService$ResourceImporter.<init>(WebResourceImportService.java:248)
        at com.sap.portal.resource.repository.WebResourceImportService.importApplicationResources(WebResourceImportService.java:172)
        at com.sapportals.portal.navigation.NavigationMimeRepositoryService.loadAllPicsToWRR(NavigationMimeRepositoryService.java:186)
        at com.sapportals.portal.navigation.NavigationMimeRepositoryService.init(NavigationMimeRepositoryService.java:160)
        at com.sap.portal.prt.core.RequestDispatcherFactory$ServiceRequestDispatcher$3.service(RequestDispatcherFactory.java:518)
        at com.sap.engine.services.servlets_jsp.server.deploy.impl.module.IRequestDispatcherImpl.dispatch(IRequestDispatcherImpl.java:363)
        at com.sap.portal.prt.core.RequestDispatcherFactory$ServiceRequestDispatcher.init(RequestDispatcherFactory.java:503)
        at com.sap.portal.prt.broker.PortalServiceItem.initServiceInstance(PortalServiceItem.java:347)
        at com.sap.portal.prt.broker.PortalServiceItem.getServiceInstance(PortalServiceItem.java:210)
        at com.sap.portal.prt.broker.PortalServiceItem.load(PortalServiceItem.java:578)
        at com.sap.portal.prt.om.ObjectsManager.createObejctHandle(ObjectsManager.java:234)
        at com.sap.portal.prt.om.ObjectsManager.getObjectHandle(ObjectsManager.java:147)
        at com.sap.portal.prt.broker.PortalAppBroker.getPortalService(PortalAppBroker.java:498)
        at com.sap.portal.prt.service.ServiceManager.getPortalServiceItem(ServiceManager.java:431)
        at com.sap.portal.prt.service.ServiceManager.get(ServiceManager.java:220)
at com.sap.portal.prt.runtime.Portal$RuntimeResources.getService(Portal.java:130)
        at com.sap.portal.pcm.iview.admin.PcmIviewCommon.getAdditionalAttributes(PcmIviewCommon.java:358)
        at com.sap.portal.pcm.iview.admin.PcmIviewCommon.initLayers(PcmIviewCommon.java:173)
        at com.sap.portal.pcm.iview.admin.AdminBaseiView.createAttrSetLayersList(AdminBaseiView.java:177)
        at com.sap.portal.pcm.page.admin.AdminBasePage.getCustomImplementation(AdminBasePage.java:76)
        at com.sap.portal.pcm.admin.PcmAdminBase.getImplementation(PcmAdminBase.java:642)
        at com.sapportals.portal.navigation.LightningHelperService.getFrameworkPageAttributesValues(LightningHelperService.java:143)
        at com.sapportals.portal.navigation.LightningHelperService.getFrameworkPageAttributesValues(LightningHelperService.java:171)
        at com.sapportals.portal.navigation.fpm.util.PhaseConfiguration.prepareAttributes(PhaseConfiguration.java:71)
        at com.sapportals.portal.navigation.fpm.util.PhaseConfiguration.storeRelatedAttributesInSharedStorage(PhaseConfiguration.java:35)
        at com.sapportals.portal.navigation.fpm.NavigationFpmListener.doFrameworkPhase(NavigationFpmListener.java:535)
        at com.sapportals.portal.navigation.fpm.NavigationFpmListener.doPhase(NavigationFpmListener.java:122)
        at com.sapportals.portal.pb.fpm.FPMContainer.distributeEvent(FPMContainer.java:63)
        at com.sapportals.portal.pb.fpm.FPM.doDocumentHook(FPM.java:179)
        at com.sapportals.portal.prt.service.document.DocumentHookMulticaster.doDocumentHook(DocumentHookMulticaster.java:100)
        at com.sapportals.portal.prt.service.document.DocumentHookService.doDocumentHook(DocumentHookService.java:119)
        at com.sapportals.portal.prt.service.document.DocumentHookServiceNew.doDocumentHook(DocumentHookServiceNew.java:186)
        at com.sapportals.portal.prt.connection.PortalHook.doDocumentHook(PortalHook.java:665)
        at com.sap.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:183)
        at com.sap.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:107)
        at com.sap.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:141)
        at com.sap.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:206)
        at com.sapportals.portal.navigation.PortalLauncher.doContent(PortalLauncher.java:116)
        at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:213)
        at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:129)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
        at com.sap.engine.services.httpserver.filters.MemoryStatisticFilter.process(MemoryStatisticFilter.java:57)
        at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
        at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
        at com.sap.engine.services.httpserver.filters.DSRHttpFilter.process(DSRHttpFilter.java:43)
        at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
        at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
        at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:475)
        at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.process(Processor.java:269)
        at com.sap.engine.services.httpserver.server.rcm.RequestProcessorThread.run(RequestProcessorThread.java:56)
        at com.sap.engine.core.thread.execution.Executable.run(Executable.java:122)
        at com.sap.engine.core.thread.execution.Executable.run(Executable.java:101)
        at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:328)
Caused by: javax.naming.InvalidNameException: Character not allowed: ':' in 'pcd:resource_repository'
at com.sapportals.portal.pcd.pl.PcdName.checkComponent(PcdName.java:64)
        at com.sapportals.portal.pcd.pl.PcdName.checkNameComponent(PcdName.java:39)
        at com.sapportals.portal.pcd.pl.PcdName.padd(PcdName.java:636)
        at com.sapportals.portal.pcd.pl.PcdName.add(PcdName.java:626)
        at com.sapportals.portal.pcd.gl.util.StringUtils.tokenizeIntoPcdName(StringUtils.java:112)
        at com.sapportals.portal.pcd.pl.PcdName.appendUrlInternal(PcdName.java:408)
        at com.sapportals.portal.pcd.pl.PcdName.<init>(PcdName.java:245)
        at com.sap.portal.resource.repository.ResourceRepositorySrv.initRepositoryRootContext(ResourceRepositorySrv.java:121)
        ... 132 more
1)We are suspecting this issue is related to the theme issue.How to update the theme in the upgraded portal(have a backup of themes)
2)Want to know if we update a theme where it stored at the operating system level(in NW 7.3 EHP1 as well as NW 7.0)
3)Is there any post steps after portal upgrade.
Request you suggest.
Regards
Maruthi

Hi
Refer the SAP Notes
1942399 - Fix usage of unregistered class loader while processing HTTP request in an application being updated or stopped at the same time
1744820 - Migration 7.3 fails while executing migration of pcd_upgrade
1703578 - WPC migration stops during connection creation
1918086 - ERROR: Unable to get iView
Regards
Ram

Crystal Reports Server 2008 trial install - unable to log into CMC

Hi,
I have been looking for a way to host my existing Crystal XI reports on our in house web application rather than using a thick client application with cview. I was told that the options were Crystal Reports Server 2008 or Visual Studio 2008. I have downloaded trials of both and am currently testing.
After installing Crystal Reports Server 2008, including MySQL DB and Tomcat web server, i am unable to log into any of the applications with the error that:
Error: Server SCOTTPC:6400 not found or server may be down (FWM 01003) null
After seeing this i checked the services on my test machine and found that the Server Intelligence Agent was not started. So i tried starting it and recieved the generic windows message:
Service on local computer started and them stopped. Some services stop automatically if they have no work to do ... etc
After multiple reboots and reinstalls i am still unable to use any aspect of the application as i am unable to log into the CMC as the server is down. Now i am new to Crystal reports and web servers so have a very limited knowledge of whats going on here - i am primarily a DBA. From what i can tell MySQL does not even appear to be installed but i cannot be sure.
Any suggestions?

ok... after research it seems a DSN has not been created.
Also when trying to start the server intelligence service i see the following in the application event viewer:
[Node Name: SCOTTPC]
[User Name: SYSTEM]
Server Intelligence Agent has failed to initialize because the bootstrap file C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\_boe_SCOTTPC.bootstrap is missing information about the CMS cluster. Please restore your bootstrap file from your backup.
i have recreated the bootstrap file but still get the same error.
i have SQL Server 2005 installed on this rig as well - could this be causing the issue? Would it be better for me to integrate this to SQL Server rather than using the MySQL DB that comes with Crystal server 2008?

Zenworks unable to log into the network

We have a Zenworks Configuration Management 11.2.2 environment with Active Directory authentication. The User source was pointing at a particular Domain controller with SSL authentication and working just fine. Today, the Domain Controller went down and I had to change it to another DC. I updated the certificate for the new DC and switched to it with no problems in the Zenworks Console. Now when users are logging into PCs with the agent installed it will generate an error and not authenticate to Zenworks. You are able to hit 'cancel' and login to the computer. If you try to manually login to the agent it will generate the following error:
"zenworks unable to log into the network because the login credentials or the server certificate is incorrect"
In the console, I am able to verify the User Source connection is correct and communicating properly. I have turned SSL on/off, switched the DC server back to the original authenticating server, and rebooted all the servers but I still get this error even on the Zenworks server themselves. I'm not sure what else to check. I found a thread with a similar issue but there resolution was to blow away the server and start from scratch. That is not a viable option for me as this system is fully set up and in production.
Any insight would greatly be appreciated.

I would start by testing LDAP Connectivity to the new server using a
native LDAP Toool. (Caution - Some MS LDAP Tools may not even use LDAP
but Use Std Windows Networking.)
On 4/22/2013 5:26 PM, scotholl wrote:
>
> We have a Zenworks Configuration Management 11.2.2 environment with
> Active Directory authentication. The User source was pointing at a
> particular Domain controller with SSL authentication and working just
> fine. Today, the Domain Controller went down and I had to change it to
> another DC. I updated the certificate for the new DC and switched to it
> with no problems in the Zenworks Console. Now when users are logging
> into PCs with the agent installed it will generate an error and not
> authenticate to Zenworks. You are able to hit 'cancel' and login to the
> computer. If you try to manually login to the agent it will generate
> the following error:
>
> "zenworks unable to log into the network because the login credentials
> or the server certificate is incorrect"
>
> In the console, I am able to verify the User Source connection is
> correct and communicating properly. I have turned SSL on/off, switched
> the DC server back to the original authenticating server, and rebooted
> all the servers but I still get this error even on the Zenworks server
> themselves. I'm not sure what else to check. I found a thread with a
> similar issue but there resolution was to blow away the server and start
> from scratch. That is not a viable option for me as this system is
> fully set up and in production.
>
> Any insight would greatly be appreciated.
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.

Some accounts on iMac unable to log into Gmail (OS X 10.6.4, Safari 5.0)

I have 5 accounts configured on my Intel iMac.
After upgrading to Snow Leopard (OS X 10.6.4), some of the accounts are unable to log into Gmail directly from a browser (not using the Mac mail client). It seems to time out. These accounts were not previously using the Mac mail client.
The accounts that previously used the Mac mail client can still successfully retrieve their Gmail via the Mac mail client, and they can still log directly into Gmail from a browser also.
Operating system: OS X 10.6.4 (Snow Leopard)
Program and version you use to access Gmail: Safari 5.0
Your antivirus software (e.g. Norton 2007): None
Any extensions, toolbars or plug-ins: None

Hi,
Your antivirus software (e.g. Norton 2007): None
I hope that means you do not have Norton a/v software installed.
For Gmail. From the Safari Menu Bar click Safari/Preferences then select the Security tab. Click: Show Cookies. Delete all Gmail related cookies. Relaunch Safari.
If you still can't login to Gmail, open Keychain Access (Applications/Utilities). Select Passwords on the left. Delete the Gmail keychain.
Relaunch Safari. Login to Gmail as you normally do with your user name and password. When prompted, click Yes.
Carolyn

Unable to Log into Discoverer

Hello All,
I am able to login Oracle Applications with some user name and password.
But when I am trying to log into discoverer with same user name and password it is throwing the error (Invalid Username / Password) (I checked the check box Oracle Application Users.
Can any help me regarding this issue.
Thanks,
Praveen.

Hi,
Are you using Desktop, viewer of plus?
You may find it useful to check these posts:
Re: Unable to connect Discoverer Server
Re: I can log to database by Plus but can't by Desktop
Rod West

I'm having a problem with logging into a FileVault-protected user account after restoring from Time Machine backup.

Hi all,
My computer had been running really slowly for a while, so I decided to erase the whole hard drive and reinstall the operating system, and then I was going to restore the files I cared about from Time Machine. The main account, which had all my documents and photos, was FileVault-protected. The last thing I did before erasing the hard drive was to run one last Time Machine backup. As far as I remember, I always ran Time Machine backups with the FileVaulted user logged in.
I don't remember whether I was using FileVault 1 or 2. I had been using FileVault 1, but I installed Lion as soon as it came out and I thought I had migrated to FileVault 2 at that point.
Once I erased the hard drive and reinstalled the operating system, I browsed the Time Machine disk and, within the Users folder, there was no folder for the main user account. When I tried to reinstall everything by restoring from Time Machine backup, I'd get the option for all the user accounts, but when I tried to log in with the main one I'd get the dreaded "You are unable to log in to the FileVault user account "User" at this time. Log in failed because an error occurred." Finally, when attempting to restore from the Time Machine backup again, I noticed something strange: After the computer got to about 10% done restoring, it declared itself completed successfully and rebooted.
I've tried a number of tips that came up from questions about similar issues on the Apple support forum, but had no luck. Is there any way to get these files back? Did they ever even get backed up?
Thanks.

Hroodbwai wrote:
I can't find it! not sure what's going on but the only folder shown is the " Shared" folder.
Did you have only the one user account? If there were others, they should also be in the "Users" folder. You probably won't have access to the files inside them, but they should be there.
From what can make out, it looks like it's not backed up any of the files for the filevault account. Can't see user folder when looking through previous backups in Time Machine galaxy view.
Are you doing that from a Finder window set to your internal HD, or your computer name? It should look something like this (with the Finder in List view):
|
|
I'd been logging out and backing up manually on a regular basis.
Scheduled backups should run normally; but they won't back up the File Vault sparse bundle, nor will any run manually.
The only time it's backed-up is when you actually log out.
You should have seen this window on logout:
|
|
followed by this one:
|
|
If you didn't see the second one, or cancelled it, the account wasn't backed-up.

Multiple users logged into one server, each users printer has a different name, application needs ONE name to print to.

Multiple users logged into one server, each users printer has a different name, application needs ONE name to print to.
I'm NOT in any way a Terminal Services expert and I need help trying to get an application program working in a multi-user environment.
The issue is that the printer changes for every user that is logged in. The application needs to print NOT to the default printer, but to a "special" printer which is selected in the application... let's call it a label printer to simplify the explanation.
You have your default regular printer, easy for the application to find that one, and then you have a special printer that labels get printed onto. The application needs to know what printer is the label printer. So we allow the user to select that in the
application and the selection is stored in a config file in
C:\ProgramData\mfgr\prog\setting files
I don't have access to the application so I can't change how this works.
In the "regular" world, selecting the label printer driver to use should be per machine, NOT per user. When a new user logs into a machine, the physical printer doesn't go "poof" and a new printer suddenly appear. Same printer for all
users.
Yet in terminal services, the physical machine is "merged" with the virtual machine on the server. And there can be many users logged in at the same time. So each users real machine (and real printer) is injected into the "fake" terminal
services machine. The name of the printers is made unique for each user. So the printers DO go "poof" and change names depending on the user logged into terminal services.
So user "A" logs in and sets up the application to print to "LabelPrinterForUserA" (or whatever the name of the printer happens to be), that setting is stored in the ProgramData subfolder, and all is well. Later, user "B" logs
in, and when they print, the application tries to print to "LabelPrinterForUserA" which doesn't exist for user B or is only accessible by user A. If user B re-configures, that breaks it for user A.
SOLUTION 1: The way that /should/ work (in my mind) is that you define one "generic" printer in Terminal Services... call it "Virtual Label printer" and when the user wants to print to it, the print job gets re-directed back to whatever
physical printer is actually connected to their local workstation. There is a map of virtual printer to actual printer depending on the current user. The application is told once to print to "Virtual Label Printer" for all users.
SOLUTION 2: Or... there should be some way to make the ProgramData sub folders separate per user. E.g. when user "A" tries to access:
C:\ProgramData\mfgr\prog\setting files
they actually get
C:\UserData\UserA\AppData\mfgr\prog\setting files
and user "B" gets
C:\UserData\UserB\AppData\mfgr\prog\setting files
So the question I have is: Does either of those solutions exist hidden somewhere in the setup of terminal server? Or is there another way around this issue that I don't know?

I don't really have a "for sure" answer to this, but because people here can't seem to deal with a question that hasn't been answered I'll provide the best answer I did receive from ServerFault.com user Nathan:
I can feel your pain with using old software on terminal servers ...the solution I've come up with definitely won't scale as it requires some manual configuration, but I've gotten this method to work with our label printers (which require to be
printed to an LPT port...yep, that old).
Share your USB-connected printers to the network on each machine. Then, have the user log in on aunique session for each of them
(a TS account cannot be shared among computers for this to work) and install a network printer pointing to the USB one they shared. Try to use a DNS name to account for possible DHCP movements.
After, it should work. Each user can do this since display names can be identical as long as the ports are different (which they are).
This was clarified by the following series of comments:
I think you are on to something here, and I originally advised the admin to do this. The problem he ran into is that it setup the printer names in the TS as "printer on usersworkstation"
and he could not rename it except to change the "printer" to whatever. E.g. the "on userworkstation" remained. I believe there is another way of installing the printer which avoids this, but I can't find it. Ages ago, one used to do NET
USE LPT2 \\computer\printer password /USER:domain\user /PERSISTENT:YES and then tell the driver to print to LPT2 –  James
Newton Mar
17 at 16:21
@JamesNewton That's actually the exact method we used. The way around the "network printer" part is to install it as local printer and map it to a TCP/IP port that way. –  Nathan
C Mar
17 at 16:28
You mean in the case where the printers are TCP/IP connected and not local USB / LPT to the users workstation? That makes sense. Wonder if this will work for USB connected printers... –  James
NewtonMar
17 at 16:35
@JamesNewton You'd share the local printer on the client's PC then on the server connect via TCP/IP to it. You'd need static addresses or use DNS names if DHCP, though. –  Nathan
C Mar
17 at 16:51
Ah. Yes. I see. Looks like the LPT thing should work even with a USB connected printer:superuser.com/questions/182655/… –  James
Newton Mar
17 at 17:09

Unable to log into HP ePrint . Error message "Ajax submit failed: error =403, Forbidden"

Installed new HP 8600 Plus printer. Attempting to log into HP ePrint with user name and password I created. Error message "Ajax submit failed: error =403, Forbidden". What does the error message mean and why can't I log into the HP ePrint website?
This question was solved.
View Solution.

Sorry for your frustrations! What browser and browser version are you using? Are you able to clear your cache and go to www.eprintcenter.com? Any additional information you can provide will be very helpful.
Although I am an HP employee, I am speaking for myself and not for HP

Unable to log into SA540 as any user

Similar Messages

Maybe you are looking for