Unable to log into the database

ZEN 6.5 sp.2, and we do not use oracle.
Running ConsoleOne direct from the Zen-server does not help.
Inventory query seems to work from my workstation. I have a local install of
ConsoleOne.
What can be wrong ?
Regards Johann Folkestad

Johann,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Similar Messages

Report Viewer unable to log into the database

I'm fairly novice to ZFD Inventory and have a reporting issue when attempting to run from ConsoleOne (1.3.6f). Receive a Report Viewer error that states "unable to log into the database. Ensure the ODBC driver...".
TID 10094443 describes my symptom exactly but apparently doesn't apply. It applies to ZFD6.5 and we're running 7. Does the Oracle fix it refers to even apply to ZFD7 Inventory? If not, what does address my issue?
Is it SQL now?
Thanks for any help.

Originally Posted by youngj
I'm fairly novice to ZFD Inventory and have a reporting issue when attempting to run from ConsoleOne (1.3.6f). Receive a Report Viewer error that states "unable to log into the database. Ensure the ODBC driver...".
TID 10094443 describes my symptom exactly but apparently doesn't apply. It applies to ZFD6.5 and we're running 7. Does the Oracle fix it refers to even apply to ZFD7 Inventory? If not, what does address my issue?
Is it SQL now?
Thanks for any help.
If you are using the Sybase database with ZDM7, take a look at the file \database drivers\odbcreadme.txt file on the Novell ZENworks 7 Companion 2 CD (downloadable from novell.com if you don't already have it). Page 347 of the ZDM 7 Install Doc also mentions this procedure:
http://www.novell.com/documentation/...dm7install.pdf

Unable to log into the portal-After Upgrade from NetWeaver 7.0 to 7.3EHP1

Dear Experts,
We have poltal landscape(NW 7.0 Dualstack SPS27) with our customozed themes and par files(Company name,logos and colours)
Recently we upgraded the one of portal from NW 7.0 to NW 7.3EHP1 . Upgrade has been successfilly completed with small issue.
After upgrade all urls are working(/nwa, /sld) except /irj/portal.We know that NW 7.3 EHp1 accepts only ear file i.e we converted the our customized log on par file to ear file through par migration tool and the same was deployed successfully through NWDS 7.3 version.After deploying we are able to access the
/irj/portal url with our customized par(means ear file) without issues,
We are unable to log into the portal after giving the correct user id and password,getting the portal runtime error as foloows.
Portal runtime error
An exception occured while processing your request.Send the exception ID your administrator
Exception id:
see log files for details about this exception
Default.trc log file(/server0/log)
#EP-PIN-PRT#tc~epbc~prtc~api#C00061FD2733006C00000005000056CB#9034950000000004#sap.com/com.sap.portal.runtime.system.hooks#com.sap.portal.prt.
runtime#J2EE_ADMIN#4##43E00B85A79911E380F800000089DCC6#3a483a0fa79911e3903000000089dcc6#3a483a0fa79911e3903000000089dcc6#0#Thread[HTTP Worker
[@900472845],5,Dedicated_Application_Thread]#Plain##
08:14_09/03/14_0005_9034950
[EXCEPTION]
java.lang.RuntimeException: Could not create Resource Repository root folder in PCD
at com.sap.portal.resource.repository.ResourceRepositorySrv.initRepositoryRootContext(ResourceRepositorySrv.java:140)
at com.sap.portal.resource.repository.ResourceRepositorySrv.init(ResourceRepositorySrv.java:93)
at com.sap.portal.prt.core.RequestDispatcherFactory$ServiceRequestDispatcher$3.service(RequestDispatcherFactory.java:518)
at com.sap.engine.services.servlets_jsp.server.deploy.impl.module.IRequestDispatcherImpl.dispatch(IRequestDispatcherImpl.java:363)
at com.sap.portal.prt.core.RequestDispatcherFactory$ServiceRequestDispatcher.init(RequestDispatcherFactory.java:503)
at com.sap.portal.prt.broker.PortalServiceItem.initServiceInstance(PortalServiceItem.java:347)
at com.sap.portal.prt.broker.PortalServiceItem.getServiceInstance(PortalServiceItem.java:210)
at com.sap.portal.prt.broker.PortalServiceItem.load(PortalServiceItem.java:578)
at com.sap.portal.prt.om.ObjectsManager.createObejctHandle(ObjectsManager.java:234)
at com.sap.portal.prt.om.ObjectsManager.getObjectHandle(ObjectsManager.java:147)
at com.sap.portal.prt.broker.PortalAppBroker.getPortalService(PortalAppBroker.java:498)
at com.sap.portal.prt.service.ServiceManager.getPortalServiceItem(ServiceManager.java:431)
at com.sap.portal.prt.service.ServiceManager.get(ServiceManager.java:220)
at com.sap.portal.prt.runtime.Portal$RuntimeResources.getService(Portal.java:130)
at com.sap.portal.resource.repository.WebResourceRepositorySrv.init(WebResourceRepositorySrv.java:71)
at com.sap.portal.prt.core.RequestDispatcherFactory$ServiceRequestDispatcher$3.service(RequestDispatcherFactory.java:518)
at com.sap.engine.services.servlets_jsp.server.deploy.impl.module.IRequestDispatcherImpl.dispatch(IRequestDispatcherImpl.java:363)
at com.sap.portal.prt.core.RequestDispatcherFactory$ServiceRequestDispatcher.init(RequestDispatcherFactory.java:503)
at com.sap.portal.prt.broker.PortalServiceItem.initServiceInstance(PortalServiceItem.java:347)
at com.sap.engine.services.servlets_jsp.server.deploy.impl.module.IRequestDispatcherImpl.dispatch(IRequestDispatcherImpl.java:363)
at com.sap.portal.prt.core.RequestDispatcherFactory$ServiceRequestDispatcher.init(RequestDispatcherFactory.java:503)
at com.sap.portal.prt.broker.PortalServiceItem.initServiceInstance(PortalServiceItem.java:347)
        at com.sap.portal.prt.broker.PortalServiceItem.getServiceInstance(PortalServiceItem.java:210)
        at com.sap.portal.prt.broker.PortalServiceItem.load(PortalServiceItem.java:578)
        at com.sap.portal.prt.om.ObjectsManager.createObejctHandle(ObjectsManager.java:234)
        at com.sap.portal.prt.om.ObjectsManager.getObjectHandle(ObjectsManager.java:147)
        at com.sap.portal.prt.broker.PortalAppBroker.getPortalService(PortalAppBroker.java:498)
        at com.sap.portal.prt.service.ServiceManager.getPortalServiceItem(ServiceManager.java:431)
        at com.sap.portal.prt.service.ServiceManager.get(ServiceManager.java:220)
        at com.sap.portal.prt.runtime.Portal$RuntimeResources.getService(Portal.java:130)
        at com.sap.portal.resource.repository.WebResourceImportService$ResourceImporter.<init>(WebResourceImportService.java:248)
        at com.sap.portal.resource.repository.WebResourceImportService.importApplicationResources(WebResourceImportService.java:172)
        at com.sapportals.portal.navigation.NavigationMimeRepositoryService.loadAllPicsToWRR(NavigationMimeRepositoryService.java:186)
        at com.sapportals.portal.navigation.NavigationMimeRepositoryService.init(NavigationMimeRepositoryService.java:160)
        at com.sap.portal.prt.core.RequestDispatcherFactory$ServiceRequestDispatcher$3.service(RequestDispatcherFactory.java:518)
        at com.sap.engine.services.servlets_jsp.server.deploy.impl.module.IRequestDispatcherImpl.dispatch(IRequestDispatcherImpl.java:363)
        at com.sap.portal.prt.core.RequestDispatcherFactory$ServiceRequestDispatcher.init(RequestDispatcherFactory.java:503)
        at com.sap.portal.prt.broker.PortalServiceItem.initServiceInstance(PortalServiceItem.java:347)
        at com.sap.portal.prt.broker.PortalServiceItem.getServiceInstance(PortalServiceItem.java:210)
        at com.sap.portal.prt.broker.PortalServiceItem.load(PortalServiceItem.java:578)
        at com.sap.portal.prt.om.ObjectsManager.createObejctHandle(ObjectsManager.java:234)
        at com.sap.portal.prt.om.ObjectsManager.getObjectHandle(ObjectsManager.java:147)
        at com.sap.portal.prt.broker.PortalAppBroker.getPortalService(PortalAppBroker.java:498)
        at com.sap.portal.prt.service.ServiceManager.getPortalServiceItem(ServiceManager.java:431)
        at com.sap.portal.prt.service.ServiceManager.get(ServiceManager.java:220)
at com.sap.portal.prt.runtime.Portal$RuntimeResources.getService(Portal.java:130)
        at com.sap.portal.pcm.iview.admin.PcmIviewCommon.getAdditionalAttributes(PcmIviewCommon.java:358)
        at com.sap.portal.pcm.iview.admin.PcmIviewCommon.initLayers(PcmIviewCommon.java:173)
        at com.sap.portal.pcm.iview.admin.AdminBaseiView.createAttrSetLayersList(AdminBaseiView.java:177)
        at com.sap.portal.pcm.page.admin.AdminBasePage.getCustomImplementation(AdminBasePage.java:76)
        at com.sap.portal.pcm.admin.PcmAdminBase.getImplementation(PcmAdminBase.java:642)
        at com.sapportals.portal.navigation.LightningHelperService.getFrameworkPageAttributesValues(LightningHelperService.java:143)
        at com.sapportals.portal.navigation.LightningHelperService.getFrameworkPageAttributesValues(LightningHelperService.java:171)
        at com.sapportals.portal.navigation.fpm.util.PhaseConfiguration.prepareAttributes(PhaseConfiguration.java:71)
        at com.sapportals.portal.navigation.fpm.util.PhaseConfiguration.storeRelatedAttributesInSharedStorage(PhaseConfiguration.java:35)
        at com.sapportals.portal.navigation.fpm.NavigationFpmListener.doFrameworkPhase(NavigationFpmListener.java:535)
        at com.sapportals.portal.navigation.fpm.NavigationFpmListener.doPhase(NavigationFpmListener.java:122)
        at com.sapportals.portal.pb.fpm.FPMContainer.distributeEvent(FPMContainer.java:63)
        at com.sapportals.portal.pb.fpm.FPM.doDocumentHook(FPM.java:179)
        at com.sapportals.portal.prt.service.document.DocumentHookMulticaster.doDocumentHook(DocumentHookMulticaster.java:100)
        at com.sapportals.portal.prt.service.document.DocumentHookService.doDocumentHook(DocumentHookService.java:119)
        at com.sapportals.portal.prt.service.document.DocumentHookServiceNew.doDocumentHook(DocumentHookServiceNew.java:186)
        at com.sapportals.portal.prt.connection.PortalHook.doDocumentHook(PortalHook.java:665)
        at com.sap.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:183)
        at com.sap.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:107)
        at com.sap.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:141)
        at com.sap.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:206)
        at com.sapportals.portal.navigation.PortalLauncher.doContent(PortalLauncher.java:116)
        at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:213)
        at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:129)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
        at com.sap.engine.services.httpserver.filters.MemoryStatisticFilter.process(MemoryStatisticFilter.java:57)
        at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
        at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
        at com.sap.engine.services.httpserver.filters.DSRHttpFilter.process(DSRHttpFilter.java:43)
        at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
        at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
        at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:475)
        at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.process(Processor.java:269)
        at com.sap.engine.services.httpserver.server.rcm.RequestProcessorThread.run(RequestProcessorThread.java:56)
        at com.sap.engine.core.thread.execution.Executable.run(Executable.java:122)
        at com.sap.engine.core.thread.execution.Executable.run(Executable.java:101)
        at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:328)
Caused by: javax.naming.InvalidNameException: Character not allowed: ':' in 'pcd:resource_repository'
at com.sapportals.portal.pcd.pl.PcdName.checkComponent(PcdName.java:64)
        at com.sapportals.portal.pcd.pl.PcdName.checkNameComponent(PcdName.java:39)
        at com.sapportals.portal.pcd.pl.PcdName.padd(PcdName.java:636)
        at com.sapportals.portal.pcd.pl.PcdName.add(PcdName.java:626)
        at com.sapportals.portal.pcd.gl.util.StringUtils.tokenizeIntoPcdName(StringUtils.java:112)
        at com.sapportals.portal.pcd.pl.PcdName.appendUrlInternal(PcdName.java:408)
        at com.sapportals.portal.pcd.pl.PcdName.<init>(PcdName.java:245)
        at com.sap.portal.resource.repository.ResourceRepositorySrv.initRepositoryRootContext(ResourceRepositorySrv.java:121)
        ... 132 more
1)We are suspecting this issue is related to the theme issue.How to update the theme in the upgraded portal(have a backup of themes)
2)Want to know if we update a theme where it stored at the operating system level(in NW 7.3 EHP1 as well as NW 7.0)
3)Is there any post steps after portal upgrade.
Request you suggest.
Regards
Maruthi

Hi
Refer the SAP Notes
1942399 - Fix usage of unregistered class loader while processing HTTP request in an application being updated or stopped at the same time
1744820 - Migration 7.3 fails while executing migration of pcd_upgrade
1703578 - WPC migration stops during connection creation
1918086 - ERROR: Unable to get iView
Regards
Ram

Total no. of users logged into the database

Can we find out total number of users logged into the database? I do not have DBA privileges.
If it is not possible by a straight SQL then do I have any other options?
Thanks.

You can find the list of all users using the query "Select * from V$Sesssion_connect_info". This requires access to system tables. But this query gives the OS user information and not the database user information.
<BLOCKQUOTE><font size="1" face="Verdana, Arial, Helvetica">quote:</font><HR>Originally posted by Krishnan:
Can we find out total number of users logged into the database? I do not have DBA privileges.
If it is not possible by a straight SQL then do I have any other options?
Thanks.<HR></BLOCKQUOTE>
null

HT4157 I am unable to log into the "View Account",

I am unable to log into the "View Account" on my iPad, I have tried to Reset the account but never get sent an e-mail. (I know what e-mail address it was originally setup with, but I did try all 3 just to be sure). I also not not able to reset the Subscription, for some reason that is not an option anymore - It was an option last week, I filled out the subscription to activate my connection, once I did the 3G went a way and that is when things started.
Just some other background - the same day this started, I received error trying to watch unrented movies on my iPad. When I tried to start watching, I received an error - "Unable to Open". I am not sure this is related or not.
I have since reset the entire iPad, (Reset all settings and Data) thinking this would fix the issue but no lick.
Network is AT&T
IOS is 5.1.1 (9B206)
64 GB
Any suggestions ?

I have had a similar problem trying to view my account with AT&T, it could be the AT&T server is down for viewing your account.

Zenworks unable to log into the network

We have a Zenworks Configuration Management 11.2.2 environment with Active Directory authentication. The User source was pointing at a particular Domain controller with SSL authentication and working just fine. Today, the Domain Controller went down and I had to change it to another DC. I updated the certificate for the new DC and switched to it with no problems in the Zenworks Console. Now when users are logging into PCs with the agent installed it will generate an error and not authenticate to Zenworks. You are able to hit 'cancel' and login to the computer. If you try to manually login to the agent it will generate the following error:
"zenworks unable to log into the network because the login credentials or the server certificate is incorrect"
In the console, I am able to verify the User Source connection is correct and communicating properly. I have turned SSL on/off, switched the DC server back to the original authenticating server, and rebooted all the servers but I still get this error even on the Zenworks server themselves. I'm not sure what else to check. I found a thread with a similar issue but there resolution was to blow away the server and start from scratch. That is not a viable option for me as this system is fully set up and in production.
Any insight would greatly be appreciated.

I would start by testing LDAP Connectivity to the new server using a
native LDAP Toool. (Caution - Some MS LDAP Tools may not even use LDAP
but Use Std Windows Networking.)
On 4/22/2013 5:26 PM, scotholl wrote:
>
> We have a Zenworks Configuration Management 11.2.2 environment with
> Active Directory authentication. The User source was pointing at a
> particular Domain controller with SSL authentication and working just
> fine. Today, the Domain Controller went down and I had to change it to
> another DC. I updated the certificate for the new DC and switched to it
> with no problems in the Zenworks Console. Now when users are logging
> into PCs with the agent installed it will generate an error and not
> authenticate to Zenworks. You are able to hit 'cancel' and login to the
> computer. If you try to manually login to the agent it will generate
> the following error:
>
> "zenworks unable to log into the network because the login credentials
> or the server certificate is incorrect"
>
> In the console, I am able to verify the User Source connection is
> correct and communicating properly. I have turned SSL on/off, switched
> the DC server back to the original authenticating server, and rebooted
> all the servers but I still get this error even on the Zenworks server
> themselves. I'm not sure what else to check. I found a thread with a
> similar issue but there resolution was to blow away the server and start
> from scratch. That is not a viable option for me as this system is
> fully set up and in production.
>
> Any insight would greatly be appreciated.
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.

Even though I am logged into the apple website with my apple id, I am unable to log into the App Store. It's the same account.

Even though I am logged into the apple website with my apple id, I am unable to log into the App Store. It's the same account.

Back up all data.
Step 1
Triple-click anywhere in the line below on this page to select it:
/Library/Preferences/SystemConfiguration/NetworkInterfaces.plist
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart the computer and test.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
Log out, log back in, and test. If there's no improvement, continue.
Step 2
Reset your computer’s PRAM.

Error upon logging into the database

We've been having this intermittent occurrence, where the following error pops up upon logging into a database instance (SQL Developer is already open)
java.lang.NullPointerException
     at oracle.dbtools.raptor.utils.TNSHelper$2.compare(TNSHelper.java:349)
     at java.util.Arrays.mergeSort(Arrays.java:1270)
     at java.util.Arrays.mergeSort(Arrays.java:1281)
     at java.util.Arrays.mergeSort(Arrays.java:1281)
     at java.util.Arrays.mergeSort(Arrays.java:1281)
     at java.util.Arrays.mergeSort(Arrays.java:1282)
     at java.util.Arrays.sort(Arrays.java:1210)
     at java.util.Collections.sort(Collections.java:159)
     at oracle.dbtools.raptor.utils.TNSHelper.getTNSEntries(TNSHelper.java:355)
     at oracle.dbtools.raptor.utils.TNSHelper.getEntry(TNSHelper.java:216)
     at oracle.dbtools.raptor.utils.Connections.populateConnectionInfo(Connections.java:645)
     at oracle.dbtools.raptor.standalone.connection.RaptorConnectionCreator.getConnection(RaptorConnectionCreator.java:62)
     at oracle.dbtools.raptor.dialogs.conn.ConnectionPrompt.promptForPassword(ConnectionPrompt.java:67)
     at oracle.jdeveloper.db.adapter.DatabaseProvider.getConnection(DatabaseProvider.java:321)
     at oracle.jdeveloper.db.adapter.DatabaseProvider.getConnection(DatabaseProvider.java:254)
     at oracle.jdevimpl.db.adapter.CADatabaseFactory.createConnectionImpl(CADatabaseFactory.java:60)
     at oracle.javatools.db.DatabaseFactory.createConnection(DatabaseFactory.java:534)
     at oracle.javatools.db.DatabaseFactory.createDatabase(DatabaseFactory.java:208)
     at oracle.jdeveloper.db.DatabaseConnections.getDatabase(DatabaseConnections.java:607)
     at oracle.jdeveloper.db.DatabaseConnections.getDatabase(DatabaseConnections.java:562)
     at oracle.dbtools.raptor.utils.Connections$ConnectionInfo.getDatabase(Connections.java:145)
     at oracle.dbtools.raptor.utils.Connections.getConnection(Connections.java:874)
     at oracle.dbtools.raptor.utils.Connections.getConnection(Connections.java:855)
     at oracle.dbtools.raptor.navigator.DatabaseConnection.openConnectionImpl(DatabaseConnection.java:117)
     at oracle.dbtools.raptor.navigator.AbstractConnectionNode.getConnection(AbstractConnectionNode.java:30)
     at oracle.dbtools.raptor.navigator.ConnectionFilter.getFactory(ConnectionFilter.java:92)
     at oracle.dbtools.raptor.navigator.ConnectionFilter$1.doWork(ConnectionFilter.java:117)
     at oracle.dbtools.raptor.navigator.ConnectionFilter$1.doWork(ConnectionFilter.java:102)
     at oracle.dbtools.raptor.backgroundTask.RaptorTask.call(RaptorTask.java:193)
     at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
     at java.util.concurrent.FutureTask.run(FutureTask.java:138)
     at oracle.dbtools.raptor.backgroundTask.RaptorTaskManager$RaptorFutureTask.run(RaptorTaskManager.java:492)
     at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
     at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
     at java.util.concurrent.FutureTask.run(FutureTask.java:138)
     at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
     at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
     at java.lang.Thread.run(Thread.java:619)What's strange is if that person closes SQL Developer and refrains from using it for about 20 minutes, everything works fine the next time they re-open the tool & try to log in. The issue seems to affect the Developer team in a round-robin fashion too, never hitting the same person 2 times in a row.
We're using SQL Developer in a Citrix environment, and no one else has the problem simultaneously. Does anyone see something useful in the error message above?
Thanks
--=Chuck
SQL Developer Version 2.1.0.63

A good number of folks are having problems with this same error message at login, and nobody seems to have found a fix.
I believe I have stumbled upon, if not a solution, at least part of the answer. If you're logged into a 10.4 workstation, open a Finder window and click the "Network" icon. The first time you do this, you'll only see "Library" and "Servers" icons, but if you let it sit for a moment, other folders will magically appear. One of these is "My Network" which is the critical part.
In Workgroup Manager, edit one of your users' home directory configuration. There's a URL piece, usually "afp://server.domain.com/Users" (which is what shows up in the window when you click on the "Home" tab for that user), and then there's a "Home" path that is usually something like "/Network/Servers/servername/Users/username". Trouble is, you've noticed that 10.4 doesn't put servers into the "Servers" path, but rather into the "My Network" path.
So, if you change that "Home" path to read "/Network/My Network/servername/Users/username", it should work--with one caveat. Apparently 10.4 doesn't create the "My Network" path on a given client until you actually browse the network on that client. If you haven't logged into a 10.4 workstation and browsed the network, the "My Network" path won't be there, and you'll still get the error. Login as a local user, browse the network (so that the "My Network" folder shows up), logout, and then login as an Open Directory user, and it should work.
I'm betting that 10.3, 10.4, and 10.5 all handle this issue differently, so if you're in a mixed-version situation, you may have to experiment to find a workable fix.
Derndest thing I ever saw.

10.6.8 Unable to log into the network after update

07-31-2011
Server: 10.6.8
Client 10.6.8
Just installed the latest updates for my snow leopard server and it will not accept my network login. I have quadruple checked the credentials and then some but it appears to accept the username and pass, displays the user avatar and then the dialogue box shakes displaying the error message:
"Logging into the account failed because an error ocurred"
It's not a very descriptive message but I checked online for some help but couldn't find much. This issue specifically happened after the latest server updates. I know I could use time machine and fix it, I fixed it before that way, but I would like to find a resolution for this issue if there is one.
Any help would be much appreciated.

After contacting Apple support I was told to rebind the machine to the server which did work initially. I was able to log in with my network login but when i shut down the machine later and tried to boot up and log back in, i was presented with the same error.
I attempted the same resolution and rebinded the machine but this time it didn't work. I tried multiple times but have had no success.

Unable to log into the user management administration web console

Can someone tell how resolve my ablity to log into the user management administration web console? I can't log into SAP Netweaver Admin, User managment, and Webdynpro content Administrator and Web Dynpro Consol. But able active j2ee engine sample? Is there some that I need activate to allow me log in?
http://localhost:50000/logon/logonServlet?redirectURL=%2Fuseradmin%2FuserAdminServlet%3FgotoDefaultPage%3D.

Hi,
I had this problem also. For me it worked to log on to the SLD and then I was able to log on to the other applications like Useradmin and NWA.
The SLD is usually available at <a href="http://localhost:50000/sld">http://localhost:50000/sld</a>.
Regards,
Sebastian

I am unable to log into the server wiki. I can get as far as the login page.

When I attempte to log into our company server wiki I can get as far as the login page.
When I type in any user/pass all I see is a spinning wheel on the login panel.
The error that is occuring in the back ground is as follows
ActiveRecord::StatementInvalid in LoginController#plain_login
SQLite3::SQLException: attempt to write a readonly database: INSERT INTO "users" ("uid", "created_at", "shortname", "longname", "generated_uid", "updated_at") VALUES (...)
I have confirmed that the postgres server for collab is running and I am able to connect to it through a Database Utility. I can also verify through this database utility that the Wiki is in tact. I do not know where else to go form here or if the errors I am seeing are not related to the wiki.
I am open to any possible assistance through this endeavor. I am running a Mac OS X server version 10.7.5.

Thank you so much. I deleted all of the Netflix history and the cookie. and it works fine now. Thank you again.

Unable to log into the SAP River RDE environment (HTTP Status 405)

Hi All,
Is anyone else facing this issue as well? I have previously been able to access the River RDE, but now I am unable to login.
From the Hanatrial cockpit, when I access my RDE subscription, and click on the rde link, I get an error message as follows:
HTTP Status 405 -
type Status report
message
description The specified HTTP method is not allowed for the requested resource.

Getting the same error. Last week the RDE subscription did work. So I think that there is a general config problem (cause also no updates were done in the River RDE setting up documentation -> SAP HANA Cloud Platform).
Regards, Florian

Unable to log into the network because the Cached login information is not

ZCM 11.2.3a
Did not yet have time to upgrade to 11.2.4
Random users get this problem.
Exactly as described here:
https://forums.novell.com/novell-pro...login-zcm.html
I can do zac reg -g https://dns-of-zcm-server
and that will allow user login OK
But if I delete local profile & then change user password in eDir & try to
login again same error happens
That is just madness!
Seb

Originally Posted by spond
Sebastian,
you'd need to capture some logs - just because it's got the same
symptoms, doesn't mean it has the same cause
Shaun Pond
Difficult to duplicate, did you notice the random bit?
I am sorry, but error is identical. Surely there should be a different error returned for different issues? Or is it just a generic one for every/any thing?
Why would
zac reg -g
fix it each time?

I am unable to log into the Contribute administration panel through Dreamweaver

I am using Dreamweaver CS5.5 and I suddenly am no longer able to administer Contribute through Dreamweaver. I click the "Administer Site in Contribute" button and the program appears to be checking files but, when this is finished, the password login window does not show up. Any suggestions for solving this issue?

Please try the following steps:-
Choose Site > Manage Sites.
Select your site and Click Edit.
Select the Servers category.
Select the server to modify and click the Pencil icon.
Change you password (set an incorrect password), then click Save.
In the Site Setup dialog box, expand Advanced Settings, select the Contribute category.
Click Administer Site in Contribute. It would show you an error message.
Now
Click on Select the Servers category.
Select the server to modify and click the Pencil icon.
Change you password (type the correct password), then click Save.
In the Site Setup dialog box, expand Advanced Settings, select the Contribute category.
Click Administer Site in Contribute. It would show you the password login window.
Hope it helps.

Crystal Reports Server 2008 trial install - unable to log into CMC

Hi,
I have been looking for a way to host my existing Crystal XI reports on our in house web application rather than using a thick client application with cview. I was told that the options were Crystal Reports Server 2008 or Visual Studio 2008. I have downloaded trials of both and am currently testing.
After installing Crystal Reports Server 2008, including MySQL DB and Tomcat web server, i am unable to log into any of the applications with the error that:
Error: Server SCOTTPC:6400 not found or server may be down (FWM 01003) null
After seeing this i checked the services on my test machine and found that the Server Intelligence Agent was not started. So i tried starting it and recieved the generic windows message:
Service on local computer started and them stopped. Some services stop automatically if they have no work to do ... etc
After multiple reboots and reinstalls i am still unable to use any aspect of the application as i am unable to log into the CMC as the server is down. Now i am new to Crystal reports and web servers so have a very limited knowledge of whats going on here - i am primarily a DBA. From what i can tell MySQL does not even appear to be installed but i cannot be sure.
Any suggestions?

ok... after research it seems a DSN has not been created.
Also when trying to start the server intelligence service i see the following in the application event viewer:
[Node Name: SCOTTPC]
[User Name: SYSTEM]
Server Intelligence Agent has failed to initialize because the bootstrap file C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\_boe_SCOTTPC.bootstrap is missing information about the CMS cluster. Please restore your bootstrap file from your backup.
i have recreated the bootstrap file but still get the same error.
i have SQL Server 2005 installed on this rig as well - could this be causing the issue? Would it be better for me to integrate this to SQL Server rather than using the MySQL DB that comes with Crystal server 2008?

Unable to log into the database

Similar Messages

Maybe you are looking for