Unable to login After configure BI 7.0 Tech system into portal

Hi Experts,
I have gone through pdf file
Integration of SAP BI 7.0 and SAP EP 7.0 created by Karthik.
I have folloewd all the steps in his document after that I restarted my server then only problem has come.
Any user not able to login into portal. it doesnt shown in the portal screen.if we are giving the wrong password it shows Authentication failed and if Iam giving correct password nothing displayed and not able to get the home page what might be the problem.
In that documnet we have done SSO thru logon tickets portal to BI.
I am using EP7.0 and BI7.0 from ECC6.0
Please help me inthis what might be the problem....?
Thanks inadvance.
Lohi.

Dear
Guide information looks correct to me.
It's pretty hard to tell you what is wrong with so little information.
Check the defaulttrace.trc trace file of your portal environment.
Location depends on stack type (abap + java or java only)
Located in /usr/sap/<SID>/DVEBMGS<instance nr>/j2ee/cluster/server0/log/system/
OR
Located in /usr/sap/<SID>/JC<instance number>/j2ee/cluster/server0/log/
It is very likely error messages are being written there that can be useful to help solve this issue.
Please paste its content in here, perhaps even from other log files that might contain valuable info.
Kind regards
Tom

Similar Messages

  • Not able to login after configuring SSH.Please reply

    i have configured AAA on Cisco aeronet 1400 series wireless bridge (AIR-BR1410A-A-K9).After configuring i am not able to login to the device via telnet and via putty.Soon after enabling SSH i am not able to login even through SSH.The below are the commands i have configured on the device.I used to configure the same commands on my Cisco Switches also.
    Layer -2
    ip domain-name NETS
    crypto key generate rsa general-keys modulus 1024
    ip ssh version 2
    aaa new-model
    aaa authentication login Login-LAN group tacacs+ line
    aaa authentication enable default group tacacs+ enable
    aaa accounting exec EXEC-LAN-L2 start-stop group tacacs+
    aaa accounting commands 1 Level-1-LAN-L2 start-stop group tacacs+
    aaa accounting commands 15 Level-15-LAN-L2 start-stop group tacacs+
    tacacs-server host 10.254.0.140 key !n01#zh3r3@|2
    line vty 0 4
    accounting commands 1 Level-1-LAN-L2
    accounting commands 15 Level-15-LAN-L2
    accounting exec EXEC-LAN-L2
    login authentication Login-LAN
    transport input ssh

    Hi,
    Check out the connectivity between cisco aeronet and TACAS server and what is the failed logs says in tacas server.
    If possible try to change the configuration to aaa authentication login Login-LAN(default) group tacacs+ line and then try what exactly happens.
    Hope that helps
    Regards
    Ganesh.H

  • Users using Windows Authentication unable to login after upgrade to SQL Server 2012 SP2 CU1

    We upgraded from SQL Server 2008 R2 to SQL Server 2012 SP2 CU1.  Upgrade was successful.  Users that have SQL Server Management Studio 2012 can successfully log in via Windows Authentication, but users with an older version of SQL Server Management
    Studio are unable to log in via Windows Authentication. 
    The error they receive is listed below:
    Connect not connect to XXXXXXX
    Login Failed.  The login is from an untrusted domain and cannot be used with Windows Authentication. 
    (Microsoft SQL Server, Error: 18452)
    If we switch to Mixed authentication, users can log in via SQL Server Authentication.
    Our security policy prohibits SQL Authentication. 
    Outside of having the staff upgrade to SQL Server 2012 SQL Server Management Studio, is there any setting I can set/unset to allow older version of SQL Server Management studio to connect to SQL Server 2012?
    Thanks.
    DJ

    Glad to see that you were able to resolve the issue yourself, but for the curious, could you explain what this
    Extended Protection is?
    Erland Sommarskog, SQL Server MVP, [email protected]

  • Unable to login after 10.4.11 update

    Software update downloaded the update for my G4 powerbook and I went ahead and loaded it as I had had no problems on my G4 700Hz angle-poise iMac. After the reboot I tried to log in but the log in box just shuddered (as in you got your password wrong).
    I tried again, I also tried another account on the machine, still no luck. basically I can't log in to my Powerbook. The the two accounts use filevault if that is of any significance, unfortunately I have no non filevault accounts on the powerbook.
    I booted my install disc and ran DiskUtil which found no errors (even permission errors), reset the passwords for the two accounts and made sure that my startup disk was set correctly.
    Still no joy.
    Booting in single user mode shown that the sparse image files are there.
    Any ideas, other than reinstalling?

    No, nothing helped. The problem I am experiencing seems to be different to the rest of the problems that people are having with the 10.4.11 update.
    I am getting to the log in screen but the username and password is being rejected from both of my accounts (which incidentally use Filevault). Resetting the password from the install disk did nothing and the log in box does not prompt me for the master password after three failed logins.
    I can find nothing in my system.log (from single user mode) to indicate a problem, however the crashreporter.log file starts complaining about mDNSResponder from the moment that the mac rebooted after the update. I can find no other reference to mDNSResponder failing in the log anywhere.
    Looking in the crash log all the entries are the same and seem to relate to the web sites I was browsing in safari when the update was installing, and if I recall just at the end of the installation safari crashed on me.
    Perhaps there is something in this although I don't see how there are related but they do all tie together. Here is an example crash reporter entry for the mDNSResponder, they are pretty much identical and again there are none before the reboot after the update. Just how this stops my logging in I don't know.
    Is there a mDNSResponder cache of some sort that I could clear out?
    Host Name: happymac
    Date/Time: 2007-11-18 12:30:41.007 +0000
    OS Version: 10.4.11 (Build 8S165)
    Report Version: 4
    Command: mDNSResponder
    Path: /usr/sbin/mDNSResponder
    Parent: launchd [1]
    Version: ??? (???)
    PID: 321
    Thread: 0
    Application Specific Information:
    ((( bunch of urls from when I was browsing in safari when the update was installing )))
    Exception: EXCBADINSTRUCTION (0x0002)
    Code[0]: 0x00000002
    Code[1]: 0x00036dac
    Thread 0 Crashed:
    0 mDNSResponder 0x00036dac dyldstubmemcmp + 4
    1 mDNSResponder 0x00002790 main + 60
    2 mDNSResponder 0x0000260c _start + 340
    3 mDNSResponder 0x0000244c start + 60
    Thread 0 crashed with PPC Thread State 64:
    srr0: 0x0000000000036dac srr1: 0x000000000208f030 vrsave: 0x0000000000000000
    cr: 0x22000248 xer: 0x0000000000000004 lr: 0x0000000000002790 ctr: 0x00000000900017a0
    r0: 0x000000000000260c r1: 0x00000000bffffdd0 r2: 0x00000000000324cc r3: 0x00000000bfffff4c
    r4: 0x00000000000366c4 r5: 0x0000000000000003 r6: 0x00000000bfffff14 r7: 0x0000000000000000
    r8: 0x000000008fe072a4 r9: 0x00000000bfffff4c r10: 0x00000000bfffff3d r11: 0x00000000bfffff34
    r12: 0x00000000900017a0 r13: 0x0000000000000000 r14: 0x0000000000000000 r15: 0x0000000000000000
    r16: 0x0000000000000000 r17: 0x0000000000000000 r18: 0x0000000000000000 r19: 0x0000000000000000
    r20: 0x0000000000000000 r21: 0x0000000000000000 r22: 0x0000000000000000 r23: 0x0000000000000000
    r24: 0x0000000000000000 r25: 0x0000000000000000 r26: 0x00000000bffffefc r27: 0x000000000000000c
    r28: 0x0000000000000002 r29: 0x0000000000000001 r30: 0x00000000bfffff00 r31: 0x0000000000000004
    Binary Images Description:
    0x1000 - 0x37fff mDNSResponder /usr/sbin/mDNSResponder
    0x8fe00000 - 0x8fe52fff dyld 46.16 /usr/lib/dyld
    0x90000000 - 0x901bcfff libSystem.B.dylib /usr/lib/libSystem.B.dylib
    0x90214000 - 0x90219fff libmathCommon.A.dylib /usr/lib/system/libmathCommon.A.dylib
    0x907bb000 - 0x90894fff com.apple.CoreFoundation 6.4.8 (368.31) /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
    0x908df000 - 0x909e1fff libicucore.A.dylib /usr/lib/libicucore.A.dylib
    0x90a3b000 - 0x90abffff libobjc.A.dylib /usr/lib/libobjc.A.dylib
    0x90ae9000 - 0x90b59fff com.apple.framework.IOKit 1.4 (???) /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
    0x90b6f000 - 0x90b81fff libauto.dylib /usr/lib/libauto.dylib
    0x91110000 - 0x9111efff libz.1.dylib /usr/lib/libz.1.dylib
    0x91121000 - 0x912dcfff com.apple.security 4.6 (29770) /System/Library/Frameworks/Security.framework/Versions/A/Security
    0x913f7000 - 0x9141ffff com.apple.SystemConfiguration 1.8.3 /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
    0x91432000 - 0x9143dfff libgcc_s.1.dylib /usr/lib/libgcc_s.1.dylib

  • Unable to login after system update

    I recently installed arch in my lenova laptop. Installation went fine and I updated my system then. Finally I had a kernel 3.4.4-2 and rebooted.
    After rebooting, I got the login screen (tty1) . I had not created an user yet. So had to login as root.
    So When I enter the username as root and click enter , the password credential request is not getting loaded. After a space of 10 seconds, I am again redirected to login request.
    I have never had this issue and I have been using arch for the past 8 months. Please advice

    I am still stuck. The other thread that I mentioned was dicussing about adding hook to mkinitcpio because /usr was in a separate partition. That is not the case in my problem.
    I rushed to close this thread before resolving my issue. the issue is still persisting. I could not login to the machine at all. And my partitions are as listed below
    sda1 - /
    sda5 - /home
    sda6 - /opt
    sda7 - /var/cache
    sda8 - swapspace
    Again, I couldnot login once after updating the system. I could login before. Please advice

  • Unable to login after installing Security Update 2014-002

    Current generation Mac mini with Mountain Lion 10.8.5.
    Restarted to install the latest security update HT6207:http://support.apple.com/kb/HT6207
    Login screen appears as usual
    When I correctly enter my password, the login screen flashes with a progress spinner and then quickly restarts the login screen. I am no longer able to login to the computer. Has anyone else had their Mac become bricked by this update? Any idea how I might be able to recover without installing a Time Machine backup in recovery mode?

    If you reset the user's password you should be able to log in again:
    Start up in safe mode (you must hold the RIGHT Shift key during boot): http://support.apple.com/kb/ph11212
    Reset the password for your user: http://support.apple.com/kb/PH11390Choose Apple menu > System Preferences, click Users & Groups, click the lock to unlock it and provide an administrator name and password, select a user, and then click Reset Password.
    If that didn't work, you may have to clear the AuthenticationAuthority directory service property belonging to your user: https://discussions.apple.com/message/20583726#20583726
    If you follow those instructions you may see some error messages indicating that certain properties aren't found, you can ignore those errors. After logging in, you may have to login to your Apple ID in the App Store application which you can do by opening App Store -> Store menu option -> Sign In.

  • Laptop unable to login after auto lock

    After my laptop auto screen lock out it requires me to switch the user [As I have 2 users here in my OS] before entering credentials? 
    This behavior was not native when i created another user, but it started recently. May i know the stupid reason behind  this irrational behaviour in my laptop? and greatfully if any fix available for this.
    Kiran

    Hi,
    Do you mean you couldn't login even though you entered the password? Ia there any error message while you login?
    Is the current user domain account or local account?
    I recommend you delete the user profile from Advanced system setting>Advances tab>User Profiles. And the re-login the account.
    Andy Altmann
    TechNet Community Support

  • Unable to login after installation of 11.5.10.2

    Hi all ,
    I'm getting the error mentioned below after installing the ORACLE APPS . Able to login through dev60cgi/f60cgi ( after changing the authentication to OFF ) . But not throught normal url http://iltest.lgeil.com:8009
    oracle.apps.fnd.framework.OAException: Application: FND, Message Name: FND_GENERIC_MESSAGE. Tokens: MESSAGE = java.lang.IllegalArgumentException: cookie name: path; (Could not lookup message because there is no database connection)
         at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:888)
         at oracle.apps.fnd.framework.webui.OAPageBean.validateUser(OAPageBean.java:4637)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:687)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:497)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:418)
         at oa_html._OA._jspService(_OA.java:88)
         at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
         at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
         at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
         at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
         at oracle.jsp.JspServlet.service(JspServlet.java:156)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
         at org.apache.jserv.JServConnection.processRequest(JServConnection.java(Compiled Code))
         at org.apache.jserv.JServConnection.run(JServConnection.java(Compiled Code))
         at java.lang.Thread.run(Thread.java(Compiled Code))
    ## Detail 0 ##
    java.lang.IllegalArgumentException: cookie name: path
         at javax.servlet.http.Cookie.<init>(Cookie.java(Compiled Code))
         at oracle.apps.fnd.common.WebRequestUtil.setGuestSession(WebRequestUtil.java:1083)
         at oracle.apps.fnd.framework.webui.OAPageBean.validateUser(OAPageBean.java:4570)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:687)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:497)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:418)
         at oa_html._OA._jspService(_OA.java:88)
         at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
         at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
         at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
         at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
         at oracle.jsp.JspServlet.service(JspServlet.java:156)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
         at org.apache.jserv.JServConnection.processRequest(JServConnection.java(Compiled Code))
         at org.apache.jserv.JServConnection.run(JServConnection.java(Compiled Code))
         at java.lang.Thread.run(Thread.java(Compiled Code))
    java.lang.IllegalArgumentException: cookie name: path
         at javax.servlet.http.Cookie.<init>(Cookie.java(Compiled Code))
         at oracle.apps.fnd.common.WebRequestUtil.setGuestSession(WebRequestUtil.java:1083)
         at oracle.apps.fnd.framework.webui.OAPageBean.validateUser(OAPageBean.java:4570)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:687)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:497)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:418)
         at oa_html._OA._jspService(_OA.java:88)
         at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
         at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
         at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
         at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
         at oracle.jsp.JspServlet.service(JspServlet.java:156)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
         at org.apache.jserv.JServConnection.processRequest(JServConnection.java(Compiled Code))
         at org.apache.jserv.JServConnection.run(JServConnection.java(Compiled Code))
         at java.lang.Thread.run(Thread.java(Compiled Code))
    ----

    yes ..installtion completed succesfully . And application id getting up with up without any issue .
    Now ,as suggested by you I run the autoconfig on AP node . But still getting the same error ...Please help me out ..as I'm very curious to login ( as I have installed it myself ) . Able to login through dev60cgi ..but not through normal...
    Regds
    Rahul

  • Console is gray unable to login after failed 10.9.4 upgrade,CPU@98%

    I have a dual cpu PPC Mac Xserve running 10.4.8, after attempting to do the upgrade to 10.4.9 my console fails to launch, the launcher process is chewing up 97%, i can ssh onto the system and have the 10.4.9 patch, but no instruct on CLI update method.
    any ideas ? this is a production server and I need to solve soon without reload ....
    ps aux output below
    ++++++++++++++++++++++++++++++++++++++++++++++++++++
    root 1 98.4 -0.0 28344 388 9:39PM :13.43 /sbin/launchd -s
    root 297 46.0 -0.1 95716 1820 9:46PM :15.83 /System/Library/CoreServices/RemoteManagement/ARDAgent.
    root 115 18.3 -0.1 95240 1772 ?? R+ 9:46PM 147:43.07 /usr/libexec/WaitingForLoginWindow

    I have a dual cpu PPC Mac Xserve running 10.4.8, after attempting to do the upgrade to 10.4.9 my console fails to launch, the launcher process is chewing up 97%, i can ssh onto the system and have the 10.4.9 patch, but no instruct on CLI update method.
    any ideas ? this is a production server and I need to solve soon without reload ....
    ps aux output below
    ++++++++++++++++++++++++++++++++++++++++++++++++++++
    root 1 98.4 -0.0 28344 388 9:39PM :13.43 /sbin/launchd -s
    root 297 46.0 -0.1 95716 1820 9:46PM :15.83 /System/Library/CoreServices/RemoteManagement/ARDAgent.
    root 115 18.3 -0.1 95240 1772 ?? R+ 9:46PM 147:43.07 /usr/libexec/WaitingForLoginWindow

  • Unable to Login & Ececute any transaction after Applying Support Package

    Dear all,
    After applying SAP_BASIS Packs (SAPKB700..) support pack from level 15 to 18,  the it got cancelled and when i try to execute any transaction i am receiving ABAP dump "syntax_error".
    When i try to login i m getting the following msg. " Syntax error in program "SAPLSDOC ""..
    SAME MESSAGE IS POSTED IN 2007 BUT NO ANSWER
    Unable to login after applying patches
    could you help me to resolve this problem?
    Thanks and regards.
    Subbu

    Hi,
    Is Support Package upgrade failed in IMPORT_PROPER step ? then plesae refer
    support pack SAPKB70014 stuck at import _proper! Very urgent.
    http://www.sapfans.com/forums/viewtopic.php?f=12&t=309661&p=954180
    We also faced same issue in Solution manager and issue solved by running to r3i commad
    tp r3i <SP_name> <SID> pf=<transport profile> -Dclientcascade=yes -Dstoponerror=8 -Drepeatonerror=8 -Dsourcesystems= tag=SPAM
    eg:
    D:\usr\sap\trans\bin>tp R3I SAPKB70014  SID pf=TP_DOMAIN_SID.PFL
    -Dclientcascade=yes -Dstoponerror=8 -Drepeatonerror=8 -Dsourcesystems= tag=SPAM
    Note: Before executing above command please contact SAP (OSS message)
    Thanks,
    Preethish

  • After configuring DMZ unable Supplier login to Sourcing modules

    After configuring DMZ unable Supplier login to Sourcing modules
    You have encountered an unexpected error. Please contact the System Administrator for assistance.
    Regards,
    Amit Chowrasia

    mikey.askdbaonline wrote:
    Anybody face this issue earlier we are also getting error
    [Wed Jan 16 07:28:08 2013] [error] mod_ossl: Unknown error
    [Wed Jan 16 07:28:08 2013] [error] mod_ossl: SSL call to NZ function nzos_Handshake failed with error 29014 (server test.com:4443, client 192.168.1.22)
    [Wed Jan 16 07:28:08 2013] [error] mod_ossl: Unknown error
    [Wed Jan 16 07:28:08 2013] [error] mod_ossl: SSL call to NZ function nzos_Handshake failed with error 29014 (server test.com:4443, client 192.168.1.22)
    [Wed Jan 16 07:28:08 2013] [error] mod_ossl: Unknown error
    Regards,
    Amit ChowrasiaWhat is your application release? What version of JRE you are running?
    Is SSL enabled?
    Is the issue with one module only?
    What document did you follow to implement DMZ?
    Can you find any errors in access_log file (assuming the above from error_log file)?
    Can you find any errors in the application.log file and/or in the database log file?
    Thanks,
    Hussein

  • Unable to login to apex as admin after apparent successful installation

    I am unable to login to apex as admin after an apparent successful installation.
    I have an existing Oracle database 11.2.0.1.0 with Oracle Text running on Windows 7 Professional with hundreds of gigabytes of free disk space available. I did everything as an operating system user with administrator privileges. I downloaded the latest version of apex 4.0.2 for all languages, unzipped the downloaded zip file, extracting all files to an apex directory. I changed the working directory to apex and started sql*plus, connected sys as sysdba, ran apexins.sql installation, apex_epg_config.sql and apexconf.sql configuration, apexchpwd.sql to change the admin password, and apxldimg.sql to copy the images, and exec dbms_xdb.sethttpport(8080), unlocked accounts, and granted connect privileges.
    The installation log did not show any errors and included:
    "Thank you for installing Oracle Application Express.
    Oracle Application Express is installed in the APEX_040000 schema.
    The structure of the link to the Application Express administration services is as follows:
    http://host:port/pls/apex/apex_admin (Oracle HTTP Server with mod_plsql)
    http://host:port/apex/apex_admin (Oracle XML DB HTTP listener with the embedded PL/SQL gateway)
    The structure of the link to the Application Express development interface is as follows:
    http://host:port/pls/apex (Oracle HTTP Server with mod_plsql)
    http://host:port/apex (Oracle XML DB HTTP listener with the embedded PL/SQL gateway)
    JOB_QUEUE_PROCESSES: 1000"
    When I use either browser, Firefox 3.6.12 or Internet Explorer 8.0, and go to http://localhost:8080/apex/apex_admin I get a screen that says:
    "Enter Application Express internal administration credentials"
    and has boxes for a username and password. When I enter admin and the admin_password that I selected, then click on login nothing happens. I don't get logged in. I don't get an error message. It does not show any signs of anything running. It just sits there. I also don't get any messages from Windows or Norton 360 indicating that a pop-up window was blocked or any such thing. I checked that the services are running and also tried shutting down the computer and re-starting (cold boot), but was still unable to login.
    I am a retired developer, not a DBA, so if there is anything else that I should do or check or provide, then please let me know. I have provided a copy and paste of everything that I could think of below. Oddly I don't see an admin user.
    SQL> select * from v$version
      2  /
    BANNER                                                                         
    Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production   
    PL/SQL Release 11.2.0.1.0 - Production                                         
    CORE     11.2.0.1.0     Production                                                     
    TNS for 64-bit Windows: Version 11.2.0.1.0 - Production                        
    NLSRTL Version 11.2.0.1.0 - Production                                         
    SQL> select status from dba_registry where comp_id = 'APEX'
      2  /
    STATUS                                                                         
    VALID                                                                          
    SQL> select username, account_status
      2  from   dba_users
      3  where  username = 'ANONYMOUS'
      4  or     username like 'APEX%'
      5  or     upper (username) = 'ADMIN'
      6  order  by username
      7  /
    USERNAME                       ACCOUNT_STATUS                                  
    ANONYMOUS                      EXPIRED                                         
    APEX_030200                    EXPIRED                                         
    APEX_040000                    OPEN                                            
    APEX_PUBLIC_USER               OPEN                                            
    SQL> select dbms_xdb.gethttpport from dual
      2  /
    GETHTTPPORT                                                                    
           8080                                                                    
    SQL> select owa_util.get_version from dual
      2  /
    GET_VERSION                                                                    
    10.1.2.0.8                                                                     
    SQL> show parameter memory_target
    NAME                                 TYPE        VALUE                         
    memory_target                        big integer 1536M                         
    SQL>

    Are you sure you did give right path to script ? Yes.
    >
    If you extract files to folder c:\temp, you have after that folder c:\temp\apex and bunch of sub folders.
    For script to update images, you give path to folder where you did extract apex install files.
    In above case that is then c:\temp .
    >I created a directory c:\apex on my laptop. I downloaded the zip file to that directory. When I extracted the files to folder c:\apex, the result was c:\apex\apex with a bunch of sub folders and files. When I ran the script, I gave the path c:\apex as indicated in my copy and paste. So, I did everything the same as in the quote above, except that I used apex instead of temp.
    Try extract Apex install zip to c:\temp and give c:\temp as path for scriptAre you suggesting that I redo the entire installation using c:\temp instead of c:\apex? What difference would that make? Would I need to do some sort of uninstall first?

  • Unable to Login to OAM after cloning

    Hi,
    I am unable to login to OAM after cloning. I am getting the message "The page cannot be displayed" when clicking on OAM front end link.
    Application version: 11.5.7
    Message from the error_log
    /apps/ts2aps/product/iAS/Apache/Apache/logs > tail -100 error_log
    DBC file :Applications
    DBC file :Applications
    log Message called
    log Message called
    log Message called
    log Message called
    log Message called
    log Message called
    *[Mon Apr  5 00:44:20 2010] [error] OPM: EW: Fail to start process with mod=JServ and grp=OACoreGroup, it's possible that your configuration file is not correct.*
    Please let me know for any other details.
    Regards,
    Mukarram

    http://<host_name>:32001/OA_HTML/jsp/fnd/aoljtest.jsp
    I am getting "The page cannot be displayed" for my hostname, after running the above URL.
    Error Message from error_log
    [Mon Apr  5 21:55:52 2010] [error] [client 64.100.24.42] client denied by server configuration: /apps/ts2aps/common_top/portal/oprocmgr-service
    [Mon Apr  5 21:55:53 2010] [error] [client 64.100.24.42] client denied by server configuration: /apps/ts2aps/common_top/portal/oprocmgr-service
    log Message called
    TransportAgentMain init called.
    Deug mode false
    Before loading jdbc drivers
    Before creating Connection Pool instance
    Setting INit Connections
    No of Connections to be created 5
    Connection no 0
    DBC file :Applications
    Connection no 1
    DBC file :Applications
    Connection no 2
    DBC file :Applications
    Connection no 3
    DBC file :Applications
    Connection no 4
    DBC file :Applications
    INit Connections done
    log Message called
    log Message called
    DBC file :Applications
    log Message called
    DBC file :Applications
    log Message called
    log Message called
    log Message called
    log Message called
    DBC file :Applications
    DBC file :Applications
    DBC file :Applications
    log Message called
    log Message called
    log Message called
    log Message called
    log Message called
    [Mon Apr  5 22:09:53 2010] [error] OPM: EW: Fail to start process with mod=JServ and grp=OACoreGroup, it's possible that your configuration file is not correct.
    Please let me know for any details.

  • Unable to login webmail after enable SSL

    Dear Sun,
    After i enable ssl on our webserver which hosting our office communication express, i was unable to login ce and the link seem so weird. But after i disable the ssl, every thing become normal. The ssl cert is from the CA.
    after i enable the ssl feature, i need key in the url "https://mailpxy3.ubd.edu.bn:80/uwc" only able to access to the login page ,but i unable to log in with a correct password and username. how can i solve this?
    and how can i change the url without needing to show the port number, when i only key in the url "https://mailpxy3.ubd.edu.bn, it won't automatically redirect to the url "https://mailpxy3.ubd.edu.bn/uwc/auth" how can i solve this problem?
    For your information, our web server version is Sun Java System Web Server 7.0U4 and our communication express version is CE6.3
    Thanks

    Thanks for your reply DNReddy, i had change to port 443 and it is work, but i still unable to log in when i enable ssl, below is the webserver log file, it seem normal.
    +"[25/Jun/2010:10:16:59] failure ( 5181): CORE3279: New configuration not installed+
    +[25/Jun/2010:10:17:09] info ( 5181): CORE5073: Web server shutdown in progress+
    +[25/Jun/2010:10:17:10] info ( 5723): CORE1116: Sun Java System Web Server 7.0U4 B12/02/2008 05:38+
    +[25/Jun/2010:10:17:13] info ( 5724): CORE5076: Using [Java HotSpot(TM) 64-Bit Server VM, Version 1.5.0_15] from [Sun Microsystems Inc.]+
    +[25/Jun/2010:10:17:23] info ( 5724): WEB0100: Loading web module in virtual server [mailpxy3.ubd.edu.bn] at [uwc]+
    +[25/Jun/2010:10:17:24] config ( 5724): WEB0110: Ignoring invalid property [allowLinking] = [true]+
    +[25/Jun/2010:10:17:36] info ( 5724): HTTP3072: http-listener-1: https://mailpxy3.ubd.edu.bn:443 ready to accept requests+
    +[25/Jun/2010:10:17:36] info ( 5724): CORE3274: successful server startup+
    +[25/Jun/2010:12:15:58] info ( 5724): CORE3276: Installing a new configuration+
    +[25/Jun/2010:12:15:58] info ( 5724): CORE3280: A new configuration was successfully installed+
    +[25/Jun/2010:14:06:33] info ( 5724): CORE3276: Installing a new configuration+
    +[25/Jun/2010:14:06:33] info ( 5724): CORE3280: A new configuration was successfully installed"+
    and below is the admin-server error logs.
    "[25/Jun/2010:10:15:34] failure ( 4177): HTTP3068: Error receiving request from 10.0.6.11 (SSL_ERROR_UNKNOWN_CA_ALERT: Client does not recognize and trust the CA that issues server certificate.)
    [25/Jun/2010:10:16:59] info ( 4177): for host 10.0.6.11 trying to POST /admingui/admingui/deployedConfigDeployment, service-j2ee reports: The new configuration is incompatible with the existing configuration (Enabling PKCS #11 or SSL requires a server restart)
    [25/Jun/2010:10:16:59] info ( 4177): for host 10.0.6.11 trying to POST /admingui/admingui/deployedConfigDeployment, service-j2ee reports: Exception : ADMIN3594: Configuration changes require a server restart.
    [25/Jun/2010:10:16:59] info ( 4177): for host 10.0.6.11 trying to POST /admingui/admingui/deployedConfigDeployment, service-j2ee reports: Exception : ADMIN3594: Configuration changes require a server restart.
    [25/Jun/2010:10:16:59] info ( 4177): for host 10.0.6.11 trying to POST /admingui/admingui/deployedConfigDeployment, service-j2ee reports: Exception : ADMIN3011: The operation failed with errors on the following nodes:
    Node 'mailpxy3.ubd.edu.bn':
    ADMIN3594: Configuration changes require a server restart.
    [25/Jun/2010:10:17:19] warning ( 4177): Stats connection with instance https-mailpxy3.ubd.edu.bn may be lost
    for your information, i still need to manually key in the /uwc.
    thanks

  • How to configure Ip address if unable to login error is occur through Hyper

    I am a new user of sun Solaris 10 . In my sun fire v490 server every thing is configured fine there is no fault in booting .But when I configured the file /etc/inet/hosts in solaris 10 and missed to configure the file /etc/inet/netmask and /etc/inet/ipnodes, due to which server is not allow me to login there is an error occur " unable to login" . Now what is the other way to login into server console. I am entering in the console using normal mode, should I try to login in using diagnostic mode., or is there any other way to login into and modify the file. I also need training videos of solaris configuration .
    Help in this regard will be highly appreciable.

    you should try to boot in single mode
    1) start server, when boot process begins (after memory checks), do a STOP + A on the Sun keyboard. you should be on prompt "Ok" (OBP)
    2) on Ok prompt, type : "boot -s"
    and tell us what happened.

Maybe you are looking for