Unable to Login Cisco Prime Collaboation (10.5.1) Web GUI

Hi all,
I cound not login CPC web GUI with credentials which i have configured during installation. With same credentials i could login to CLI.
I have used "cpc-provisioning-10.5.1-320-small.ova" to install CPC.
Best Regards,
Mesut

Hi Mesut,
What credentials u are using to login in CLI & GUI?
Did u try logging through globaladmin?
http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/collaboration/10-0/quick/start/guide/Cisco_Prime_Collaboration_Quick_Start_Guide_10.html
User Accounts
For Prime Collaboration, you will be required to specify various passwords at different instances. This section is designed to help you specify appropriate passwords in several scenarios that demand your login credentials (applicable for both converged application as well as standalone Prime Collaboration Assurance and Prime Collaboration Provisioning applications).
globaladmin- is a superuser who can access both Prime Collaboration Assurance and Prime Collaboration Provisioning UI.
globaladmin password- specify this password when you configure your virtual appliance for either standalone or converged application. See Configuring the Prime Collaboration Assurance Virtual Appliance and Configuring the Prime Collaboration Provisioning Virtual Appliance. You are also required to specify this password when you login to the UI (see the Password Rules for root user and globaladmin section)
regds,
aman

Similar Messages

Unable to install Cisco Prime 4.2.1

Hello @ all,
i´m trying to install Cisco Prime 4.2.1 but i´m getting following error.
Can someone give me a hint why the installation failes?
Thank you.
Regards,
Chris

Nevermind. I first have to install 4.2

Unable to login cisco NSS 322

Hi,
We recently installed the smart storage nss322 and update the firmware to latest version (NSS322_FW_1.4.0.7).
Was configured with static IP network adress, network load balancing (with the second NIC), SSL access, was joined to domain, connected to AD for user access control to folders and only the sharing service was active, the rest is disabled (web, ftp, etc), basically because we use it to backup the network data. The rest of options have the default basic configuration. The Storage is operating and we can access to it from the network, write, read and delete files. The IP is alive and we can pinging without problems.
Suddenly, we cannot login into storage using web browser secure port.
When enter to the login screen, and insert user and password for the administrator user, the storage always ask to change the password (with any user from NAS or AD).
Username:
Password:
Application:
Administration
Language:
EnglishDeutschEspañolFrançaisItaliano日本語
SSL login
LOGIN
In the change password screen, we filled all the fields:
Change Password
To change your password, please fill out the form below:
Old Password
New Password
Verify New Password
and no matter the password that we write, we always receive the next message:
Update failed
Click "Go Back" to go back to the change password page.
And we cannot enter to administration panel.
So someone can help us?
Regards for all that want help us.

Patrico,
I like to add more details into this area. You can do as jason recommended to recovery the local administration password. However, there are two screen I can described as follow:
1. NSS Login screen: The NSS GUI only allowed the local account with admistration privilege to access and manage NAS's GUI. AD or NIS administration privilege is not as same as the local account. These account are not allowed to access the NSS GUI. There are two conditions that user will observed with login.
a. Invalid user account (username is no match with database): there is no account under that username in the database for local account, AD domain, or NIS domain. The GUI screen will give user the error message (red text above the username field)
b. Valid user account: any user account with administration privilege for local account can access to the NAS GUI. Any user account came from AD and NIS domain, included administration privilege in the domain, will redirected to the changed password screen.
2. Screen to change to a new password:
- This screen only changed the password for local user. The concept is for any user who access to the share/folder with their own password.
- Any user account imported from AD or NIS server will failed to change to new password due to another level of security at the main AD or NIS server. In this case, it required the IT person to change the password at the server location.
Bottom line, the screen to change to a new password is intended for local user who wanted a new password for access folders/shares via FTP, Samba, NFS for that user account.
Hope that helps!
Thanks,
-Clint

Cisco Prime Collaboration Assurance _ Web login

I have recently deployed Cisco Prime Collaboration Assurance standard within our Vmware environment with the view to evaluate and deploy into production.
I have successfully deployed within the environment and can log into the appliance via SSH via the root, admin and globaladmin account however when I try to login through the Web Gui with the above accounts, i am getting the " invalid username or password" error.
Can anyone provide guidance please
Peter

Hi Peter,
Never faced such issue.
Look into the bugs if helps.
PC 9.0 After restore from backup, cannot login - invalid password
CSCui00260
Description
Symptom:
cannot log in to the GUI with any known username/pw including globaladmin account.
tomcat logs will show 'untrusted certificate' errors.
Conditions:
seen after a fresh restore from backup on a new server.
Workaround:
contact BU for workaround.
Assurance password for globaladmin with * at end or beginning fails
CSCue81630
Description
Symptom:
User 'globaladmin' is unable to login to Prime Collaboration Assurance
Conditions:
The password for 'globaladmin' contains '*' at the beginning or end of the password
Workaround:
Do not use '*' character at the beginning or end of the password
regds,
aman

Unable to login to the web console cisco Prime assurance 9.0 password not working :(

Hi all,
I was able to install the Cisco Prime 9.0 assurance
I am entering the correct username and password still I am not able to login to Web admin page
How do i reset the password and login to the web admin console??
Plz help... urgent...
Rgds,
Rebecca....

Thanks Rob so much
yes i booted the NCS from the DVD and installed the applications
now i have two NCS appliances one is running PI 1.2 and other LMS 4.2

Issue with cisco acs 4.2.Users unable to login aaa client but after restarting group policy able to login

issue with cisco acs 4.2.Users unable to login aaa client but after restarting group policy able to login

issue with cisco acs 4.2.Users unable to login aaa client but after restarting group policy able to login

Cisco Prime DCNM 6.1(2) - Login to webinterface fails

Hi, we are having trouble logging into the webinterface of our DCNM installation.
(Cisco Prime DCNM 6.1(2), Windows 2008 R2 SP1 64 bit version, US)
Everything seems to be working fine so far, except the login to the webinterface.
When calling https://<SERVER_IP> (we're using 443 and 8443 in our setup), the login page appears. Entering the credentials results in the message "Authentication Failed. Please try again.". We tried that from a remote machine and the server itself and are using local authentication (not RADIUS or LDAP, ...).

I have the same issue on a new install. I just deployed DCNM 7.0.2 from the OVA file downloaded directly from Cisco. I can ssh into the box using the root password set, but cannot log in to the web interface. I get the same Authentication Failed. Please try again. message. I tried updating the password using appmgr add_user xmpp -u admin -p <password> but that didn't work either. I have just opened a TAC case to see what might be the issue.

Cisco Prime LMS 4.1 - /cwportal/group/lms/lms not found error after login

After upgrading the MDF (Common Services) and the device packages on our Cisco Prime LMS 4.1 installation we now get an error after logging in. The error is as follows;
Status
Not Found The requested resource was not found.
https://X.X.X.X/cwportal/group/lms/lms
The top of the page is the normal menu and anything we choose there works fine so we only see this just after logging in to CiscoWorks.
Has anyone experienced this problem or do you have any idea what might be causing it?
The installation is running on a Cisco appliance.
kind regards,
Michel

It's being access from a client using Internet Explorer 8 (which is what I'm forced to use due to company policy) by access the DNS name of the ciscoworks server and logging in.. It worked previous to installing the patches so I'm not exactly sure what has happened. I'll try to get another PC to test from though to see if it's something to do with my browser or PC.
If I add -configuration to the url it works just fine.

Cisco Agent Desktop, unable to login

I have a new installation of UCCX 8.0.2 SU3 HA and twice now it has been reported that in the morning agents are unable to login to CAD, the error they receive is "Initialization Failed. Please try again or try restarting the application."
The only thing I have found in each situation was to re-start the UCCX engine on the master server. If I am running realtime reports I also see "not connected" when trying to look at resources, CSQs or overall UCCX stats. Once the engine has been restarted agents login fine and real time reports shows "fully connected"
Has anyone experienced this before and know of a way to prevent this from happening?
Thank you,
Steve

Hi Everyone,
I experienced the same issue today on UCCX 8.0 SU3. All the agents were getting Initialization Failed error.
I restared the UCCX engine on both the servers and agents are able to login now. I am interested in finding out the root cause and a permanent fix for it.
Has anyone found a solution to it?
I could find the following but matching the problem description but it's in TERMINATED state and moreover I am on MCS and not on VMware.
CSCtf34095 Bug Details
UCCX CAD agent not able to login when using C-series server
Symptom:
CAD agent not able to login when using UCCX C-series server. We are getting error "Initialization failed. Please trey again later or restart the application"
Conditions:
UCCX on C-series server with VmWare
Workaround:
None
Thanks,
Kapil

Cisco Prime unable to connect to TAC Service Requests

Always had the problem, but now decided to mess around with it.
When I try to get Cisco Prime 4.1 to connect to TAC Service Request I get the following error....
"There was an error while fetching the list of TAC Service Requests: String index out of range: -1"
I am able to download IOSs and other software with Prime, just not able to connect to TAC.
Thanks

Hi Marco,
actually it took me quite a long time to understand what the problem was. I found that on my CISCO AP i had to put "payload-encapsulation dot1h" on the radio interface to get the WIP310 communicate with the AP.
By the way It seems to me that the phone is a little buggy from the wireless point of view. Sometimes i have to try several times before getting the phone connected to the AP. Once the phone gets connected it's pretty stable, but getting it connected it's a nightmare :-)
Try with the above ption if you have a Cisco AP. Also try different channels on the AP...it might help
Hope this will help you
regards
Nicola

Cisco Prime 2.0 - CLI credential

Hi PI Experts,
Is CLI credential mandatory on Cisco Prime?
What would happen if no dedicated CLI credential were configured on Prime to access Cisco network devices?
Right now we use TACACS+ to login to Cisco switches and routers and use Radius to login to PI.
However, our security policy prevents us from either creating a AD account on AD servers or creating a local TACACS+ user account on ACS server for PI appliance.
So, when we do device discovery, if we want to use SSH/Telnet, we need to put in our own AD user credentials, then remove them after the discovery is done.
Thanks
Cedar

Hi Ceder,
What would happen if no dedicated CLI credential were configured on Prime to access Cisco network devices?
why Telenet credentilas are required :
Telnet Credential
you can specify the Telnet credentials during discovery so that Prime Infrastructure can collect the device configurations and fully manage the devices. If you do not specify Telnet credentials in the discovery settings, Prime Infrastructure discovers the devices but is unable to manage the device until you specify the Telnet credentials.
In case you are using SSH on your devices:
SSH Credential
For full device support via SSH, you must use SSHv2 with a 1024 bit key. You can configure SSH before running discovery.
Telnet\SSH , credentilas would be required later on as well to Fetch the config , to push any template on the device etc..
Thanks-
Afroz
[Do rate the useful post]
****Ratings Encourages Contributors ****

Unable to login with Jabber Windows

Hi ,
Am unable to login the Jabber Windows Client. Getting the error as "Unable to Communicate With the Server".
Able to login with CUPS & CUCM end user page. CUCM Integrated with LDAP.
While going through the UP Profile logs seen that "Failed to SOAP login".
Tried with restart of CUCM & CUPS several times but no go.
CUCM Version - 8.6.2
CUPS Version - 8.6.1
Tried with CUPC client result also same.
Thanks in Advance

If credentials work on CCMuser CUPSuser I would suspect either some kind of communication problem between the clients and the servers and/or misconfiguration (user/device/line association, device owner, roles, CTI/CCMCIP profiles, etc) on CUCM/CUPS.
Specially because you mention the same happens with CUPC.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk

User Name and Password for Cisco Prime Infrastructure 2.1

Hi all:
I am stuck at the login page of Cisco Prime Infrastructure 2.1.
I have tried using the user name root and its password (when log in with root at Vsphere Client) and also the login user name "before" get into the appliance infrastructure, all cannot work.
Anybody knows what is the default username or password or any way to set the username and password for this Cisco Prime Infrastructure 2.1 website?
Thanks!
tangsuan

Hi Tangsuan,
Following is the documented procedure for password recovery..
In order to modify the GUI root user password, you will need to login to the NCS CLI
as an admin user, and enter the command
"ncs password root password <new password>" (without the quotes)
This should set the web interface root user password :
http://www.cisco.com/en/US/docs/wireless/ncs/1.1/configuration/guide/manag.html#wp1268889
If you have lost your CLI password , try the default logging that is ,
CLI user is admin and not root, so please try logging in as admin with
the password that was set during setup. If that does not work , you need
the install disk that came with the appliance to recover that password.
Follow these steps:
Recovering a Lost Admin Password
If you lose or forget the admin password for NCS appliance, follow these steps.
Step 1 Reboot the NCS appliance with the ISO DVD inserted. The Cisco Prime Network Control
System Welcome screen appears:
ISOLINUX 3.11 2005-09-02 Copyright (C) 1994-2005 H. Peter Anvin
             Welcome to Cisco Prime Network Control System
To boot from hard disk, press <Enter>.
Available boot options:
   [1] Network Control System Installation (Keyboard/Monitor)
   [2] Network Control System Installation (Serial Console)
   [3] Recover administrator password. (Keyboard/Monitor)
   [4] Recover administrator password. (Serial Console)
<Enter> Boot existing OS from Hard Disk.
Enter boot option and press <return>.
boot:
Step 2 Select the desired recovery option, 3 or 4, depending on how you
are connected to the appliance and then follow the prompts.
Thanks-
Afroz
***Ratings Encourages Contributors ****

CAD Agent Unable to Login due PGUser Association in CUCM

Hi all, hope everyone is well.
I am running a UCCE 7.5.8 environment with CAD 7.5.8 and CUCM 7.1.3 I am having some CAD agent suddenly unable to login to CAD due the following error "An unknow failure was receved from the Cisco Unified Communication Manager. You may have entered an incorrect ID, password, or extension. Verify your entries are correct and try again."
The fix is to dis-associate and re-associate the device with the PGUser in CUCM even though the device shows it's already associated with the PGUser. Has anyone run into this issue ? I am trying to understand the root cause.
Thanks all in advance !! I appreciate any inputs / suggestions !!
Danny

Hi,
yes, unfortunately, I have seen this many times working with the ICM 7.x or 7.5.x release train. Always talked to TAC, always installed an ES, but somehow, mystically, the problem went away when upgraded to ICM 8.0(x).
Looks like a design flaw.
Did you talk to TAC yet?
G.

Cisco Prime NCS 1.2.1.012 nms stopped

Hi all,
Got an issue with nms server stopped, it is the full 3300 appliance not a vm, have tried:
1.
ncs stop
ncs cleanup
ncs start
2.
ncs stop
ncs redidb ( off the top of my head can't remember exact command for that one)
ncs start
3.
tried reboot after ncs stop
Getting this ouptu on ncs start:
As first time is not present - removing .dbCreated
Starting Network Control System...
Unable to verify hardware.
This may take a few minutes...
Also on ncs start verbose getting a massive error:
Processing Service Name: NMS Server
Remoting 'Matlab Server' started successfully.
Starting NMS Server
Checking for running servers.
Checking if DECAP is running.
00:00 DECAP is not running.
00:00 Check complete. No servers running.
00:11 DECAP setup complete.
Creating the DB schema
Removing configuration folder on DB clean
DDL execution of the script /opt/CSCOlumos/bin/aems_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
        DDL execution of the script /opt/CSCOlumos/bin/aems_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
DDL execution of the script /opt/CSCOlumos/bin/compliance_engine_schema.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP star
tup.
        DDL execution of the script /opt/CSCOlumos/bin/compliance_engine_schema.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting X
MP startup.
DDL execution of the script /opt/CSCOlumos/bin/cr_proc_drop_part.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
        DDL execution of the script /opt/CSCOlumos/bin/cr_proc_drop_part.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP star
tup.
DDL execution of the script /opt/CSCOlumos/bin/disableStats.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
        DDL execution of the script /opt/CSCOlumos/bin/disableStats.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
DDL execution of the script /opt/CSCOlumos/bin/ifm_ca_exclude_list.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
        DDL execution of the script /opt/CSCOlumos/bin/ifm_ca_exclude_list.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP st
artup.
DDL execution of the script /opt/CSCOlumos/bin/ifm_ca_mainpage_view.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
        DDL execution of the script /opt/CSCOlumos/bin/ifm_ca_mainpage_view.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP s
tartup.
DDL execution of the script /opt/CSCOlumos/bin/ifm_indexes.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
        DDL execution of the script /opt/CSCOlumos/bin/ifm_indexes.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
DDL execution of the script /opt/CSCOlumos/bin/ifm_sam_foundation_system_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP
startup.
        DDL execution of the script /opt/CSCOlumos/bin/ifm_sam_foundation_system_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exit
ing XMP startup.
DDL execution of the script /opt/CSCOlumos/bin/ifm_sam_ipsla_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
        DDL execution of the script /opt/CSCOlumos/bin/ifm_sam_ipsla_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP star
tup.
DDL execution of the script /opt/CSCOlumos/bin/ifm_sam_ipsla_default_data.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP st
artup.
        DDL execution of the script /opt/CSCOlumos/bin/ifm_sam_ipsla_default_data.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting
XMP startup.
DDL execution of the script /opt/CSCOlumos/bin/ifm_sam_pm_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
        DDL execution of the script /opt/CSCOlumos/bin/ifm_sam_pm_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup
DDL execution of the script /opt/CSCOlumos/bin/ifm_sam_pm_lt_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
        DDL execution of the script /opt/CSCOlumos/bin/ifm_sam_pm_lt_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP star
tup.
DDL execution of the script /opt/CSCOlumos/bin/ifm_sam_pm_lt_sp.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
        DDL execution of the script /opt/CSCOlumos/bin/ifm_sam_pm_lt_sp.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP start
up.
DDL execution of the script /opt/CSCOlumos/bin/ifm_sam_pm_mt_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
        DDL execution of the script /opt/CSCOlumos/bin/ifm_sam_pm_mt_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP star
tup.
DDL execution of the script /opt/CSCOlumos/bin/ifm_sam_syslog_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
        DDL execution of the script /opt/CSCOlumos/bin/ifm_sam_syslog_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP sta
rtup.
DDL execution of the script /opt/CSCOlumos/bin/ifm_sam_system_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
        DDL execution of the script /opt/CSCOlumos/bin/ifm_sam_system_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP sta
rtup.
DDL execution of the script /opt/CSCOlumos/bin/ifm_swim_default_repo.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup
        DDL execution of the script /opt/CSCOlumos/bin/ifm_swim_default_repo.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP
startup.
DDL execution of the script /opt/CSCOlumos/bin/job_schema_update.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
        DDL execution of the script /opt/CSCOlumos/bin/job_schema_update.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP star
tup.
DDL execution of the script /opt/CSCOlumos/bin/ncs_api.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
        DDL execution of the script /opt/CSCOlumos/bin/ncs_api.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
DDL execution of the script /opt/CSCOlumos/bin/wcs_dropFKs.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
        DDL execution of the script /opt/CSCOlumos/bin/wcs_dropFKs.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
DDL execution of the script /opt/CSCOlumos/bin/wcsutils.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
        DDL execution of the script /opt/CSCOlumos/bin/wcsutils.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
DDL execution of the script /opt/CSCOlumos/bin/wda_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
        DDL execution of the script /opt/CSCOlumos/bin/wda_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
DDL execution of the script /opt/CSCOlumos/bin/wirelessAlarmSpecificId.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP start
up.
        DDL execution of the script /opt/CSCOlumos/bin/wirelessAlarmSpecificId.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XM
P startup.
DDL execution of the script /opt/CSCOlumos/bin/xmp_credential_mgr_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startu
p.
        DDL execution of the script /opt/CSCOlumos/bin/xmp_credential_mgr_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP
startup.
DDL execution of the script /opt/CSCOlumos/bin/xmp_fingerprints_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
        DDL execution of the script /opt/CSCOlumos/bin/xmp_fingerprints_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP s
tartup.
DDL execution of the script /opt/CSCOlumos/bin/xmp_preference_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
        DDL execution of the script /opt/CSCOlumos/bin/xmp_preference_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP sta
rtup.
DDL execution of the script /opt/CSCOlumos/bin/xmp_quartz_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
        DDL execution of the script /opt/CSCOlumos/bin/xmp_quartz_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup
DDL execution of the script /opt/CSCOlumos/bin/xmp_rbac_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
        DDL execution of the script /opt/CSCOlumos/bin/xmp_rbac_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
DDL execution of the script /opt/CSCOlumos/bin/xmp_usermgmt_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
        DDL execution of the script /opt/CSCOlumos/bin/xmp_usermgmt_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP start
up.
Any ideas ?

Hi Ben:
There are .iso images for both Prime Infrastructure 1.2.1 and the current release, Prime Infrastructure 1.3.0.20 that can be downloaded and burned to a Dual Layer DVD (in a Dual Layer DVD burner) and used to reimage the physical appliance with. These physical appliances shipped from a factory with a hard drive that has magnetic representations of 0 and 1 on it, it's entirely possible something happened to something to the data in transit. Reimaging puts everything back to square one and completely rules out the possibility of anything being corrupted.
Once it's running again, be sure to check out and install the Update 1 patch for Prime Infrastructure 1.3.0.20 (filename PI_1.3.0.20_Update_1-12.tar.gz).
Release Notes for Update 1 for Cisco Prime Infrastructure 1.3.0.20

Unable to Login Cisco Prime Collaboation (10.5.1) Web GUI

Similar Messages

Maybe you are looking for