Unable to Login & Ececute any transaction after Applying Support Package

Dear all,
After applying SAP_BASIS Packs (SAPKB700..) support pack from level 15 to 18,  the it got cancelled and when i try to execute any transaction i am receiving ABAP dump "syntax_error".
When i try to login i m getting the following msg. " Syntax error in program "SAPLSDOC ""..
SAME MESSAGE IS POSTED IN 2007 BUT NO ANSWER
Unable to login after applying patches
could you help me to resolve this problem?
Thanks and regards.
Subbu

Hi,
Is Support Package upgrade failed in IMPORT_PROPER step ? then plesae refer
support pack SAPKB70014 stuck at import _proper! Very urgent.
http://www.sapfans.com/forums/viewtopic.php?f=12&t=309661&p=954180
We also faced same issue in Solution manager and issue solved by running to r3i commad
tp r3i <SP_name> <SID> pf=<transport profile> -Dclientcascade=yes -Dstoponerror=8 -Drepeatonerror=8 -Dsourcesystems= tag=SPAM
eg:
D:\usr\sap\trans\bin>tp R3I SAPKB70014  SID pf=TP_DOMAIN_SID.PFL
-Dclientcascade=yes -Dstoponerror=8 -Drepeatonerror=8 -Dsourcesystems= tag=SPAM
Note: Before executing above command please contact SAP (OSS message)
Thanks,
Preethish

Similar Messages

  • After applying support package up to sapkb64020 finance node in IMG disappe

    We havwe an ECC5. It seems that (very probably as we noticed aftervards)after applying
    support package up to sapkb64020 in IMG(SPRO) "finance" node(and nodes
    beneath) disappeared. As this is very urgent I would kindly ask you for good answers

    Hey,
    The sulotion for this problem exists in note number 922552:
    Note 922552 - SPRO: Financial Accounting Node not visible in Reference IMG
    good luck

  • MAM Not Working After Applying Support Package

    We have been lived with MAM 2.5 with SP16 for almost a year now.  We recently applied support package 19 for ABAP and J2EE stacks but MAM stopped working right after that.  To fix the problem we had to do the following steps:
    1.  Disable all SyncBO
    2.  Regenate all SyncBO
    3.  Run Replicate Database
    4.  Enable all SyncBO
    5.  Delete MAM 2.5 client by WebConsole for all PDA (over 100 devices)
    6.  Re-Assign MAM 2.5 client back to PDA from WebConsole
    My question is do we have to perform those steps above every time we are applying new support package?  If it is a case, it's very time consuming because we have to manually perform step 5-6 for every users.
    Does anyone have seen or experience this scenario before?  Your comment is highly appreciated.
    Regards,
    Dai Ly

    Hi Karthik,
    Let me clarify on "Not working"
    It showned synchrozation successuffly but no data transfer between client and middleware and vs.  For instance, the user never receive any new work orders, or their times never got transfered back to R/3.  Even though, there is no error on the client.
    It appear that step 1-4 are required otherwise, you get ABAP Runtime error (using ST22):
    Runtime Error          CALL_FUNCTION_NOT_FOUND    
    Except.                CX_SY_DYN_CALL_ILLEGAL_FUNC
    Date and Time          02/07/2007 08:12:27        
    After we performed step 1-4 but there were data transfer between client and R/3.  The only way to get it working, we had to delete client and re-assign MAM 2.5 back to each users.
    No, we didn't apply client patch SP19.  We are still using SP16.
    As we speak, everything is working because we had to re-assign MAM 2.5 for every users. but I hope we don't have to do this next time we apply another Support Package.
    Thanks.
    Dai Ly

  • Unable to login RPD or Dashboard after applying the latest patch

    Hi All,
    I was earlier having OBIEE 11.1.1.6.6 instance, recently we have applied the OBIEE 11.1.1.6.8 patch. After applying patch I could not login to RPD or Dashboard. It errors out with Invalid Username or Password. FYI, when I tried to update GUID by setting the parameter to YES in NQSConfig.INI, and when I restart the BI server , it errors out saying could not connect to BI Security as update GUID parameter is set to YES.
    Any help would be greatly appreciated.
    Note: I could able to open my RPD in offline mode.

    Hi,
    u have to migrate the RPD and webcatlog as well
    pls mark helpful if answered
    thanks

  • Issue with cisco acs 4.2.Users unable to login aaa client but after restarting group policy able to login

    issue with cisco acs 4.2.Users unable to login aaa client but after restarting group policy able to login

    issue with cisco acs 4.2.Users unable to login aaa client but after restarting group policy able to login

  • Error after applying support patch SAPK-40009INCPRXRPM

    Hi all,
    In our PLM system after applying support patch SAPK-40009INCPRXRPM of component CPRXRPM, release-400
    we are getting some short dumps like CALL_FUNCTION_NOT_FOUND saying that OLR3_DMS_RFC_LOAD_OBJECT_LINKS function module can't found but this function module doesn't exist in the system.
    plz help me in this regard.
    Thanks in advance.
    Regards,
    Raja

    Thanks for the prompt response Samrat,
    But with SGEN we can only regenerate the programs, but here the problem is the module I mentioned doesn't exist in system.
    Regards,
    Raja

  • Error while applying support packages

    Hi,
    I was applying support packges for NW 7.0 EHP2 for the components SAP BASIS/ABAP/PI BASIS & BW,  the support package level was 02, I have downloaded 03,04,05,06 for all the above four components.  While updating spam/saint update I got the above error, displayed below. But even while applying support packages I got a list of errrors.
    1.     
    Category: Abap programming error
      Runtime error:  call_function_parm_unknown
    CX_SY_DYN_CALL_PARAM_NOT_FOUND
    abap program: RSSPAM07
    Function parameter "IV_IMP_SCENARIO" in unknown
    this first error displayed after applying SPAM/SAINT update.
    2. The import was stopped, since an error occured during the phase IMPORT_PROPER, which the support package Manager is unable to resolve without your input
    The following details help you to analyse the problem:
    Error in phase : IMPROT_PROPER
    Reason for error:
    Return code:
    Error Message:
    Please provide any solution as soon as possible....

    The details of SLOG
    START CMDIMPORT            NG1 L      20120227162812              SHABZ        BasisTrn3 20120227162811973  
    STOP  CMDIMPORT            NG1 L      20120227162813              SHABZ        BasisTrn3 20120227162811973  
    START imp all              NG1        20120227162821              SHABZ        BasisTrn3 20120227162821661  
    INFO: event SAP_IMPORT_START triggered successfully
    START DD IMPORT            NG1 H      20120227162822              SHABZ        BasisTrn3 20120227162821661  
    STOP  DD IMPORT            NG1 H      20120227162839              SHABZ        BasisTrn3 20120227162821661  
    START DD ACTIVATION        NG1 A      20120227162839              SHABZ        BasisTrn3 20120227162821661  
    START tp_getprots          NG1 J      20120227162839              SHABZ        BasisTrn3 20120227162821661  
    STOP  tp_getprots          NG1 J      20120227162925              SHABZ        BasisTrn3 20120227162821661  
    STOP  DD ACTIVATION        NG1 A      20120227162925              SHABZ        BasisTrn3 20120227162821661  
    START DISTRIBUTION OF DD-O NG1 S      20120227162925              SHABZ        BasisTrn3 20120227162821661  
    START tp_getprots          NG1 S      20120227162925              SHABZ        BasisTrn3 20120227162821661  
    STOP  tp_getprots          NG1 S      20120227162929              SHABZ        BasisTrn3 20120227162821661  
    STOP  DISTRIBUTION OF DD-O NG1 S      20120227162929              SHABZ        BasisTrn3 20120227162821661  
    INFO  TBATG CONVERSION OF  NG1 N      not needed                  SHABZ        BasisTrn3 20120227162821661  
    START MOVE NAMETABS        NG1 6      20120227162929              SHABZ        BasisTrn3 20120227162821661  
    START tp_getprots          NG1 P      20120227162929              SHABZ        BasisTrn3 20120227162821661  
    STOP  tp_getprots          NG1 P      20120227162935              SHABZ        BasisTrn3 20120227162821661  
    STOP  MOVE NAMETABS        NG1 6      20120227162936              SHABZ        BasisTrn3 20120227162821661  
    START MAIN IMPORT          NG1 I      20120227162936              SHABZ        BasisTrn3 20120227162821661  
    STOP  MAIN IMPORT          NG1 I      20120227163023              SHABZ        BasisTrn3 20120227162821661  
    START TBATG CREATION OF EN NG1 n      20120227163024              SHABZ        BasisTrn3 20120227162821661  
    START tp_getprots          NG1 Y      20120227163024              SHABZ        BasisTrn3 20120227162821661  
    STOP  tp_getprots          NG1 Y      20120227163034              SHABZ        BasisTrn3 20120227162821661  
    STOP  TBATG CREATION OF EN NG1 n      20120227163034              SHABZ        BasisTrn3 20120227162821661  
    START EXECUTION OF REPORTS NG1 R      20120227163035              SHABZ        BasisTrn3 20120227162821661  
    START tp_getprots          NG1 R      20120227163035              SHABZ        BasisTrn3 20120227162821661  
    STOP  tp_getprots          NG1 R      20120227163202              SHABZ        BasisTrn3 20120227162821661  
    STOP  EXECUTION OF REPORTS NG1 R      20120227163202              SHABZ        BasisTrn3 20120227162821661  
    INFO  EXECUTION OF STANDAR NG1 9      not needed                  SHABZ        BasisTrn3 20120227162821661  
    INFO: event SAP_IMPORT_STOP triggered successfully
    STOP  imp all              NG1   0004 20120227163203              SHABZ        BasisTrn3 20120227162821661  
    START CMDIMPORT            NG1 L      20120227164418              SHABZ        BasisTrn3 20120227164416991  
    STOP  CMDIMPORT            NG1 L      20120227164454              SHABZ        BasisTrn3 20120227164416991  
    START DD IMPORT            NG1 H      20120227165608              SHABZ        BasisTrn3 20120227165607479  
    STOP  DD IMPORT            NG1 H      20120227170309              SHABZ        BasisTrn3 20120227165607479  
    START DD ACTIVATION        NG1 A      20120227170313              SHABZ        BasisTrn3                    
    START tp_getprots          NG1 J      20120227170313              SHABZ        BasisTrn3                    
    STOP  tp_getprots          NG1 J      20120227171206              SHABZ        BasisTrn3                    
    STOP  DD ACTIVATION        NG1 A      20120227171206              SHABZ        BasisTrn3                    
    START imp all              NG1        20120227171208              SHABZ        BasisTrn3 20120227171207614  
    INFO: event SAP_IMPORT_START triggered successfully
    START DISTRIBUTION OF DD-O NG1 S      20120227171208              SHABZ        BasisTrn3 20120227171207614  
    START tp_getprots          NG1 S      20120227171208              SHABZ        BasisTrn3 20120227171207614  
    STOP  tp_getprots          NG1 S      20120227171303              SHABZ        BasisTrn3 20120227171207614  
    STOP  DISTRIBUTION OF DD-O NG1 S      20120227171304              SHABZ        BasisTrn3 20120227171207614  
    START TBATG CONVERSION OF  NG1 N      20120227171304              SHABZ        BasisTrn3 20120227171207614  
    START tp_getprots          NG1 N      20120227171304              SHABZ        BasisTrn3 20120227171207614  
    STOP  tp_getprots          NG1 N      20120227171307              SHABZ        BasisTrn3 20120227171207614  
    STOP  TBATG CONVERSION OF  NG1 N      20120227171307              SHABZ        BasisTrn3 20120227171207614  
    START MOVE NAMETABS        NG1 6      20120227171307              SHABZ        BasisTrn3 20120227171207614  
    START tp_getprots          NG1 P      20120227171308              SHABZ        BasisTrn3 20120227171207614  
    STOP  tp_getprots          NG1 P      20120227171755              SHABZ        BasisTrn3 20120227171207614  
    STOP  MOVE NAMETABS        NG1 6      20120227171755              SHABZ        BasisTrn3 20120227171207614  
    START MAIN IMPORT          NG1 I      20120227171756              SHABZ        BasisTrn3 20120227171207614  
    ERROR: RFC function TRINT_PROGRESS_INDICATOR error: SYSTEM_FAILURE
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    STOP  MAIN IMPORT          NG1 I      20120227195335              SHABZ        BasisTrn3 20120227171207614  
    START TBATG CREATION OF EN NG1 n      20120227195335              SHABZ        BasisTrn3 20120227171207614  
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    START tp_getprots          NG1 Y      20120227195335              SHABZ        BasisTrn3 20120227171207614  
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    STOP  tp_getprots          NG1 Y      20120227195521              SHABZ        BasisTrn3 20120227171207614  
    STOP  TBATG CREATION OF EN NG1 n      20120227195521              SHABZ        BasisTrn3 20120227171207614  
    INFO  EXECUTION OF STANDAR NG1 9      not needed                  SHABZ        BasisTrn3 20120227171207614  
    INFO: event SAP_IMPORT_STOP triggered successfully
    STOP  imp all              NG1   0903 20120227195522              SHABZ        BasisTrn3 20120227171207614

  • Syntax Error while applying support package stack 8

    I get the following short dump while I was applying support package stack 8.  I'm at the latest saint version 34
    Runtime Errors         SYNTAX_ERROR
    Date and Time          23.07.2009 14:09:27
    Short text
         Syntax error in program "CL_DYNPRO_PROPERTY_BAG========CP ".
    What happened?
         Error in the ABAP application program.
         The current ABAP program "SAPLSCR2" had to be interrupted because it con
         a statement that cannot be executed.
         In the include "CL_DYNPRO_PROPERTY_BAG========CM009 " in the line 176 of
          program "CL_DYNPRO_PROPERTY_BAG========CP " the following syntax
         errors occur:
         "The field "SPROP_C_TAG_CUSTOMPROPERTY" is unknown, but there is a fiel"
         "d with the similar name "SPROP_C_TAG_TOOLTIPTEXT". "SPROP_C_TAG_TOOLTI"
         "PTEXT"."
         Author and last person to change the include are:
         Author "SAP "
         Last changer "SAP "
    Error analysis
         The following syntax error was found in the program
          CL_DYNPRO_PROPERTY_BAG========CP :
         "The field "SPROP_C_TAG_CUSTOMPROPERTY" is unknown, but there is a fiel"
         "d with the similar name "SPROP_C_TAG_TOOLTIPTEXT". "SPROP_C_TAG_TOOLTI"
         "PTEXT"."
    Trigger Location of Runtime Error
         Program                                 SAPLSCR2
         Include                                 LSCR2U47
         Row                                     31
         Module type                             (FUNCTION)
         Module Name                             RS_SCRP_PROP_ADD_TO_PROP_LIST
    1 FUNCTION RS_SCRP_PROP_ADD_TO_PROP_LIST.
    2 *"----
    3 ""Lokale Schnittstelle:
    4 *"  IMPORTING
    5 *"     REFERENCE(P_TEXTFIELD) TYPE  D021S-FNAM OPTIONAL
    6 *"     REFERENCE(P_TOOLTIPTEXT_TEXTELEM) TYPE  CHAR3 OPTIONAL
    7 *"     REFERENCE(P_TOOLTIPTEXT_VARIABLE) TYPE  D021S-FNAM OPTIONAL
    8 *"     REFERENCE(P_KEEPTAB) TYPE  SEU_BOOL OPTIONAL
    9 *"     REFERENCE(P_DISABLEIMPLICITLABELS) TYPE  SEU_BOOL OPTIONAL
    10 *"     REFERENCE(P_BARCODEINPUT) TYPE  SEU_BOOL OPTIONAL
    11 *"  CHANGING
    12 *"     REFERENCE(P_PROP_LIST) TYPE  PROP_LIST
    13 *"----
    14
    15 data: l_prop type prop_line,
    16       l_prop_list type prop_list,
    17       l_string type prop_str.
    18
    19 * Property TextField
    20 * -
    21
    22 if p_textfield is supplied.
    23   clear l_prop_list.
    24   clear l_prop.
    25   l_prop-name   = sprop_c_tag_textfield_name.
    26   l_prop-syntax = sprop_c_syntax_content .
    27   l_prop-value  = p_textfield.
    28   append l_prop to l_prop_list.
    29 * Zusammensetzen eines Strings der Form
    30 * <Name>value_1</Name> ... <Name>value_n</Name>
    >>   call method cl_dynpro_property_bag=>fill_prop_list_into_properties
    32     exporting
    33       prop_list  = l_prop_list
    34     importing
    35       properties = l_string.
    36 * Property-Eintrag zusammensetzen
    37   clear l_prop.
    38   l_prop-name   = sprop_c_tag_textfield.
    39   l_prop-type   = sprop_c_type_string.
    40   l_prop-syntax = sprop_c_syntax_content .
    41   l_prop-value  = l_string.
    42 * Property-Eintrag in PROP_LIST aufnehmen/ersetzen
    43   read table p_prop_list transporting no fields
    44       with key name = l_prop-name.
    45   if sy-subrc = 0.
    46     modify p_prop_list index sy-tabix
    47         from l_prop.
    48   else.
    49     append l_prop to p_prop_list.
    50  endif.
    Can anyone help me?  I now get the same error with executing other transactions as well.

    Hi,
    Please let us know the component which you are trying to apply. Is it BASIS or ABAP or BW and also let us know the version?
    I hope you are applying the BW patch 8, as per SAP's recommendation we need to apply both 8 an 9 patch of BW at the same time. If not we need to apply some notes which you could find in the service market place. Once you apply the notes, you can proceed with the SP application.
    Regards,
    Varadhu

  • DDIC_ACTIVATION ERROR WHILE APPLYING SUPPORT PACKAGE SAPKW35020 IN ECC5.0

    Hi Gurus,
    I am getting error DDIC_ACTIVATION while applying support package(BW) SAPKW35020 in ECC5.0 with MSSQL database in Windows server.
    I am not able to reset the queue, when i tried to reset the queue the system prompting that " cannot reset queue while DDIC_ACTIVATION" phase".
    Can you please help to reset the queue and implementing this support package.
    Thank you,
    Regards,
    Ganesh

    Paste the SPAM log here.
    Regards,
    Nick Loy

  • DDIC_ACTIVATION ERROR WHILW APPLYING SUPPORT PACKAGES

    Hi all,
    While applying support package(KB62019),i got error(DDIC_Activation)..
    How to resolve it?
    Thanks in advance.

    Hi,
    Which support package are you applying ? Have a look at these notes: 782140 and 447925.
    Search for SAPKB62019 in this note and you will get a solution to that. The note refers to some more notes. Please follow the instuctions in the note carefully.
    Cheers,
    Sunil
    PS: Reward points for helpful answers.

  • Unable to login to my WindowsPC after installing new iTunes version 7.4.3.1

    Hi all,
    I just received an alert saying a new version of iTunes was available and I went ahead and installed it. After the install the system prompted me to restart. I did the restart and now I am unable to log back into the system.
    I tried my local and domain accounts and all that happens is it starts the login process and says loading local settings and then says logging off and gives me back the login screen.
    I am unable to gain access to the system through normal settings and or safe mode. I fear that if this is a iTunes problem we're going to have major problems at my clients who do allow this application on their network.
    Any thoughts, issues on or about this?
    Please advise.
    Thank you,
    ~The Suite~

    Hi Timmy,
    Thank you for the comments and feedback. I had logged into the system when I got in this morning and nothing else was installed nor changed. The iTunes update was the only change between the successful login and now me being unable to login.
    I am doing some rollbacks and will see what happens.
    Thank you,
    ~The Suite~

  • Unable to login to IDES system after client copy

    Hi guys
    the IDES system which i was using was working fine. I was trying CLient copy today morning and was trying to create a new client in the IDES system.
    The client copy failed due to a shortdump in the process.
    Now i am unable to login to the client 800 as it says the user password is incorrect.
    How do i get back my 800 client? is there a way to get back the client 800 or do i have any other optionn to re-set the password without logging on to the client?
    i do have access to client 000.
    please guide me what should i do? i need the client 800 back and should be able to login too.

    hi,
    i cannot login to client 800. I need to login first in the client 800 to go to su01 to re-set the password.
    I want to login to client 800 which i am unable to do as a result of client copy. So the other option i am looking at is reset the password from client 000.
    anyways thanks for your inputs
    Hi guys,
    any idea?
    Edited by: Workflow  learner on Jun 2, 2008 10:48 AM

  • Unable to login to sap after importing support package

    Dear consultants,
    I have applied the support package basis 11, but it terminated since then i am not able to login to sap from any client  and any user,
    please give your opinions,
    it gives dumps, and at the bottom of logon screen it says, status 0020 program sapmsyst .
    regards,

    Sameer,
    I hope your problem is resolved right now. If not,
    It would be better if you can give a little more information as to which system and version did you apply support pack to? What was the SPAM support pack level? At what phase did the SAPKBxx11 support pack terminated? What OS are you running on? Also, please check if any transports are still running at the 'OS' level.
    Thank you.

  • Unable to login to SAP B1 after database migration

    I would like to know how to login to SAP B1 after database migration. I export data from MSSQL 2005 and import data to MSSQL 2008 which is located in different server. I failed to login to SAP B1 with both current password and default password. It will prompt me the error 'User code or password is incorrect'. Is there any other login ID(current user ID is manager) or how I can change the password? Or is there any other way to transfer or migrate the database to a new server?

    hi,
    i am afraid your database is corrupted, try to make a full database backup from your SQL 2005 then restore it to your SQL 2008. also you can try another method, by detaching your Database from 2005 then copy the .MDF and .LDF then copy this 2 files in your new server, put it in your desired directory, then from your SQL 2008, attached the Database.
    also, have one question, is your SA account in 2008 and 2005 have the same password? it must be the same.
    regards,
    Fidel

  • Server admin is unable to login to server.app after upgrade to Mountain Lion Server?

    After upgrade to Mountain Lion Server I am unable to login to the server tools. When I input the admin user name and password the dialog box just shakes indicating the wrong password. But it is the correct password. How do I reset the password or if necessary how do I rest the server and start over on Mountain Lion. I found info on how to reset the server on previous versions of the server which involved executing a plist in the LaunchDaemon folder. However that file does not exist on the server following upgrade to Mountain Lion.
    Thanks, Howard

    I upgraded today and had the same issue. I took following steps to fix my computer.
    Boot into Recovery Partition (Hold Option Button while booting)
    Open Terminal.
    Type resetpassword
    Select your hard drive
    Select the user account (Administrator)
    Enter a new password for the user
    Reenter password
    Save
    Restart
    Boot normally, Login as Adminstrator with the new password and add "Admin" permission to your account.
    Restart
    Everything should be working as expected

Maybe you are looking for

  • Problem in OBI 11g 11.1.1.7.0 Installation - Configuration Progress

    I'm trying to install do Oracle Business Intelligence 11.1.1.7.0 and when the instalation reaches the Configuration Progress when it tryies to create a instance, it gives the following error: [2013-05-21T12:20:52.158-03:00] [as] [ERROR] [] [oracle.as

  • Very Urgent - DELIMITEDDATA question for MS Excel reports

    Hi, I have several queries, formula , place holder, summary columns in my data model view. Is there any way I can control the order in which they appear on the delimiteddata file. A lot of the reports I have a pretty complex with summaries at multipl

  • FTP_COMMAND in order to get files list at FTP address

    Hi all. I want to get a list of files exist at a specific FTP address. For that I'm using FTP_CONNECT (OK) and after I want to execute FTP_COMMAND with parameter command = 'ls' in order to recievce the files list in output table data[]. I keep on get

  • Multitouch support for trackpad on Windows

    Is there any way to enable full multitouch support for the Macbook Pro trackpad under Windows? The two-finger scrolling works perfectly but I miss the three finger swipe and thre-finger flick whenever I boot on Windows.

  • Illustrator crashes after opening new or existing file

    I have the trial version of Illustrator CS5 and am using Windows XP Professional with Service Pack 3.  I want to purchase the full version of CS5 Design, but everytime I try to use Illustrator, it crashes.  More specifically, it launches just fine.