Unable to login in EP 6.0 after system refresh

After performing the system refresh of EP 6.0, completed the post system copy steps.
Imported the new certificated as well, when I try to login the page is getting refresh but remains on the same page.
please help me what could be the reason.

Hi Abdul.
I think you have selected the Algorithm as RSA, which is the default one.<br />
Please change it to DSA and hope the issue will be solved.
Regards,
Satish

Similar Messages

Unable to login to apex as admin after apparent successful installation

I am unable to login to apex as admin after an apparent successful installation.
I have an existing Oracle database 11.2.0.1.0 with Oracle Text running on Windows 7 Professional with hundreds of gigabytes of free disk space available. I did everything as an operating system user with administrator privileges. I downloaded the latest version of apex 4.0.2 for all languages, unzipped the downloaded zip file, extracting all files to an apex directory. I changed the working directory to apex and started sql*plus, connected sys as sysdba, ran apexins.sql installation, apex_epg_config.sql and apexconf.sql configuration, apexchpwd.sql to change the admin password, and apxldimg.sql to copy the images, and exec dbms_xdb.sethttpport(8080), unlocked accounts, and granted connect privileges.
The installation log did not show any errors and included:
"Thank you for installing Oracle Application Express.
Oracle Application Express is installed in the APEX_040000 schema.
The structure of the link to the Application Express administration services is as follows:
http://host:port/pls/apex/apex_admin (Oracle HTTP Server with mod_plsql)
http://host:port/apex/apex_admin (Oracle XML DB HTTP listener with the embedded PL/SQL gateway)
The structure of the link to the Application Express development interface is as follows:
http://host:port/pls/apex (Oracle HTTP Server with mod_plsql)
http://host:port/apex (Oracle XML DB HTTP listener with the embedded PL/SQL gateway)
JOB_QUEUE_PROCESSES: 1000"
When I use either browser, Firefox 3.6.12 or Internet Explorer 8.0, and go to http://localhost:8080/apex/apex_admin I get a screen that says:
"Enter Application Express internal administration credentials"
and has boxes for a username and password. When I enter admin and the admin_password that I selected, then click on login nothing happens. I don't get logged in. I don't get an error message. It does not show any signs of anything running. It just sits there. I also don't get any messages from Windows or Norton 360 indicating that a pop-up window was blocked or any such thing. I checked that the services are running and also tried shutting down the computer and re-starting (cold boot), but was still unable to login.
I am a retired developer, not a DBA, so if there is anything else that I should do or check or provide, then please let me know. I have provided a copy and paste of everything that I could think of below. Oddly I don't see an admin user.
SQL> select * from v$version
2 /
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE     11.2.0.1.0     Production
TNS for 64-bit Windows: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
SQL> select status from dba_registry where comp_id = 'APEX'
2 /
STATUS
VALID
SQL> select username, account_status
2 from   dba_users
3 where username = 'ANONYMOUS'
4 or     username like 'APEX%'
5 or     upper (username) = 'ADMIN'
6 order by username
7 /
USERNAME                       ACCOUNT_STATUS
ANONYMOUS                      EXPIRED
APEX_030200                    EXPIRED
APEX_040000                    OPEN
APEX_PUBLIC_USER               OPEN
SQL> select dbms_xdb.gethttpport from dual
2 /
GETHTTPPORT
       8080
SQL> select owa_util.get_version from dual
2 /
GET_VERSION
10.1.2.0.8
SQL> show parameter memory_target
NAME                                 TYPE        VALUE
memory_target                        big integer 1536M
SQL>

Are you sure you did give right path to script ? Yes.
>
If you extract files to folder c:\temp, you have after that folder c:\temp\apex and bunch of sub folders.
For script to update images, you give path to folder where you did extract apex install files.
In above case that is then c:\temp .
>I created a directory c:\apex on my laptop. I downloaded the zip file to that directory. When I extracted the files to folder c:\apex, the result was c:\apex\apex with a bunch of sub folders and files. When I ran the script, I gave the path c:\apex as indicated in my copy and paste. So, I did everything the same as in the quote above, except that I used apex instead of temp.
Try extract Apex install zip to c:\temp and give c:\temp as path for scriptAre you suggesting that I redo the entire installation using c:\temp instead of c:\apex? What difference would that make? Would I need to do some sort of uninstall first?

Logical System Conversion after system refresh failed

Hello,
Logical System Conversion after system refresh couldn't complete as the printer was locked. This job was run in the background. In SM37, the job log of RBDLSMAP shows as job finished, but it took only 40 seconds. Now I see that the logical system got changed(Converted) in the client settings scc4 but I know that this client being a production client and would run for couple of hours. Here is the job log information.
02/18/2009 16:09:33 Job started                                                                     00           516          S
02/18/2009 16:09:33 Step 001 started (program RBDLSMAP, variant &0000000000000, user ID ABCD)      00           550          S
02/18/2009 16:09:33 Output device PRN1 is locked in the SAP system                                  PO           349          I
02/18/2009 16:10:19 Job finished                                                                    00           517          S
When try to rerun bdls again, it shows that it is already available and it says "The new logical system name is already assigned to the current client".
Any suggestions on this?
Thanks,
Mahesh

Hi ,
Rerun the BDLS again as this took very little time.
When you try to run again it popsup message saying it already exists just delete that and again put the Logical system name and run it will run that time.
May be while scheduling the job you gave for spool I am not sure why is it looking for Printer which is locked.
Thanks.

SAP License issue after system refresh.

Hi,
After system refresh, refreshed system has License info of source system. When trying to apply license from unix, it gives below error, saying system number is incorrect to apply new license. Looks the system number of source system is causing issue. I checked, there is no data in MLICHECK table. I could see some info in "saplikey" table. System is 700 system.
sidadm> saplikey -install "/home/SID/sid_multiple.txt pf=/usr/sap/SID/SYS/profile/SID_DVEBMGS01_sapsidci
This system's system number is "000000000710287641", but there is a license key
for system number "000000000711311441" in file "/home/SID/sid_multiple.txt".
sidadm>
Thanks.

First check whether you have deleted all invalid licenses?
use below command to delete invalid licenses
sidadm>saplicense -delete
And apply new license based on new hardwarekey with below command
sidadm>saplicense -install
*I think there should be some invalid licenses lying in your system
Regards
Nick Loy

After System Refresh Variants missing

Hi,
We have used Export / Import method to build QAS system from production
ABAP export file.
After System refresh we got the same Production client with all
configurations, Variants, Object including data.. Which is Perfect.
But, as per our business we don't want to use the same production
client number in Quality System., so we done Cliet Copy to copy to
different client (ex: Client 200) using SAP_ALL profile.
Question: But after client copy we found that some Data, Objects,
Variants are missing in the new client (200).
Ex: In Client 100 (Copy of production client) table T009 is having 10
entries, but after client copy in client 200 the same table doesn't have any
entry in that including standard and Z.
Please help me on this, how do I get clone / copy of 100 client
(original client)
Thank You,
Ramesh

Hi Ramesh,
Looks like your client copy didn't bring all the data and Objects, Did you checked logs, Is there any error message ? The client copy completed with all the tables ?
You can try Remote client copy method .
You can manually export the variants from the source client to Target client and you need to export the Variants from the table VARID, VARI, VARIT and VARIS.
You can use the below forum procedure to export and import variants.
how to export RFC destination to file in order to import it in an other sys
Since, not only the variants you are missing data and Objects, I would suggest for re-copy the client.
Regards,
Arjun

Unable to login to iTunes (from appleTV) after apple ID two step verification enabled

I recently enabled two step verification for appleID. Now when I attempt to use that appleID with my appleTV, I am unable to login to iTunes. Should I not have enabled two step verification ? Do I need to revert back to user name / password only for my appleID, which I use in conjunction with my appleTV ?
help
brianb

dis-regard this problem. I was able to regain normal operation, once I reset my appleTV, and re-configured it using my current appleID. It is rather odd though that I need to re-set my appleTV each time I change my appleID.

SDCCN settings after system refresh

Hi,
I am planning to refresh my TST system with PRD.
For post system refresh activates, what I have to do for SDCCN settings.
So that EWA will generate automatically.
Kindly advice.
Our environment Windows 2003, Oracle 10g2 and Netweaver 7.01
Best Regards
Satya

Hi Satya,
Once you finish the QAS refresh then login to Solution and perrun a "managed system configutation wizard " and make sure to activate EWA.
After you finish the above said wizards sucessfully then schedule EWA under "EarlyWatch Alert Management" (SOlman SP10).
I'm sure this would assistance you to enable EWA in QAS .
Regards
Mani

Windows 8.1 will not activate on HP19-2113w after system refresh.

Everything was working fine on my PC. Then the other day it crashed and said there was a disk error and that it had to scan the whole drive to find the error. It finished scanning, but windows 8.1 would not load sucessfully. Therefore I did a system refresh thru HP recovery. After doing that windows would start up normally, but I lost my activation. When I tried to activate the response was "Key doesn't work try again later" or something like that. Kept trying, no luck. I thought it may have been an error with the system refresh, so I did the total system reset (after saving personal data). Now I am having the same problem with activation, and If I try to navigate the normal way to the activation screen, the screen disapears. I can get to activation using command prompt. but key still does not work. The key I am using I retrived from my BIOS data. Also, I ran the refresh and reset from the origional hard drive partition. I hope someone has a solution to this. Thanks is advance Bill

Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I have read your post on how your desktop computer will not activate after performing a system refresh, and I would be happy to assist you in this matter! In order to correct this issue, I suggest following the steps in this resource on Windows 8 product activation, which should help to activate Windows 8.1 on your system. Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards

Wily introscope issue after System refresh in solman 7.1 Sp11

Hello experts,
Unable to remove old Production wily in quality system.
An new wily has installed in development box but when i run Solman_setup -> basis configuration ->cofig wily
Unable to unassign or delete old wily introscope
Thanks ,
Rahul Yedapally

Hi Rahul,
Check in expert mode , diagnostic agent of development system should appear in quality SMD agent administration as you are assigning DEV wily to SOLMAN QUA.
and all so make sure RFCs WEBADMIN , SOLMANDIAG and
NONE are working fine in SOLMAN.
Thanks,
Prakash Reddy Maram

Table structure changed in testing system after system refresh.

Hi Team,
Recently we underwent a system refresh in Testing System where the Testing data is filled with Production data. But now we find that in one table some fields which we had deleted they are again found there. The version history of table is also gone. The table object was under testing in testing system and after which it was supposed to be transported to production. I believe System refresh only means refresh of data and it has nothing to do with table structure. Please correct me if I am wrong. Please also let me know what could be the reason of those changes in table if it is not System Refresh.
Regards,
Amit

I believe System refresh only means refresh of data and it has nothing to do with table structure.
Alas, you were wrong, after all table definition are data too, as program sources...
You have to re-import every transport request which was not yet transported to production in your test system.
Regards,
Raymond

RSA1 issue after system refresh

Hello all,
I am not sure if this is the right forum for my issue but i will give it a try. Here is my situtation:
we recently refreshed our SDX sandbox apo system from DEV. No other systems in the group were refreshed , target systems or others were not refreshed in parallel. As a post refresh step, just like in BW, I had to go to RSA1> right click on the source sytem (pointing to old logical name DEVBI)> and then restore. So now, the new Sources sytem for SCM is supposed to be Sandbox BI (SBI) which is fine ,and the source system connection is also working good. But when we perform search for SBI datasources in RSA1 .it display 2 entries for the same datasource..one with SBI source system (which is correct) and another one with old source sytem (DBI, which is incorrect).. So we see the duplicate entries for the same datasource with 2 logical system names (old+new). Also, we are unable to replicate datasources for the SBI source system, it says DBI source sytem does not exist. I am not sure why this DBI source system's logical still there. Can anyone please share if they have ran into similiar issues? if so How can i get rid of this old logcial names from RSA1 from datasources ,that is DBI.
BTW, RABASIDOC and RSLOGSYSDEST table entries are showing correctly. Again, BW is the source system here.
Thanks,

Durgesh,
Thanks for your suggestion. Actually I did run BDLS and didnt manually create the source system in RSA1. I just had to restore the existing one and everything went fine, the source sytem checks good. But the issue still exist. The old Source system Logical name (DEV BI) still shows when searching for datasources in RSA1, so the search result displays the same datasource entry twice one associated with old Source system LSN (DEV BW in this case) and another one asscociated with the correct Source system logical name. And when we try to replicate datasources it gives error "DEV BI source system does not exist". I checked all related tables such as RSBASIDOC..and its showing correctly.
Can anyone please suggest why there the old source system logical name is still coming up? and how can this be resolved? Thanks.

Adding transports to import queue after System Refresh

Hello All,
Every time we do system refresh from PRD to Sandbox as a part of post refresh activity we need to import all the transports which are in the import queue of PRD(which are not yet imported to PRD) to our Sandbox.
But its a tedious job, as in the import queue many old transports which are still not yet imported to PRD will b there.
So may b around 150+ transport requests in the import queue of PRD, which we need to add those manually from path
Extras---->other requests -
> Add. doing same for 150 times. cant even imagine dat work.
So my question is, Is there any way to get the replica of import queue of PRD to Sandbox.
Some where i read like transport buffer in the path /usr/sap/trans/buffer/<SID> of the system will have list of all transports in the import queue.
So can i copy dat file and replace SID with Sandbox SID and place it in the Sandbox under same path.
Please suggest or give me a correct solution.
Regards,
Ravi

Thanks a lot for your reply.
I had read about using script like tp addtobuffer inorder to add the transports to the import queue some time back.
But forwarding transports is a new method i got to know here which even looks easy too. It would be great if any 1 tell me how forwarding works.
Also it would b fine if who all uses this method of forwarding to add transports to import queue do reply about any problems faced while forwarding requests.
Bcoz in our landscape , transport route is as below
Dev to QA and Sandbox then from QA transports will move to Production.
So after refresh forwarding Transports from PRD to Sandbox, how does this work. Please share your suggestions.
Regards,
Ravi

False backup / archive alerts after system refresh

We have implemented CCMS on our systems. We recently refreshed our QTS system with a backup of production (PTD). CCMS is now sending alerts for backups and archives. It tells us that the backup and archive did never run.
I checked DB12 and found that there is no data in DB12. This is probably due to the system refresh.
Is there any extra post refresh step that we can do to prevent these false alerts (other than running a full online backup as post refresh step)? Is it possible to export the backup information (tables used by DB12) as pre refresh step and re-import them after the refresh?

Kevin DK wrote:
Will it create issues if we do not delete tables SDBAH and SDBAD during the refresh?
No. BTW, tables are not to be deleted, just the table 'entries'.
Thanks

Source System Problem after system refresh in RSA1 trx

Hi,
We have R/3 4.7 Test source system created in our SCM 2007 Test System. The source system check was OK.
The R3 Test system was refreshed with Production data few days back and now my source system is not working. When i perform Source System check it says:
BI unknown in source system
BI IDoc type ZSSB006 is not the same as source system IDoc type
I performed following steps in R3 Test system after its system refresh:
1. Created logcal system and created RFC.
2. Created port in trx we21.
3. Created partner profile in trx we20.
4. For the outbound parameter RSSEND, I had to create idoc type that should be same as in my SCM system i.e. ZSSB006.
5. Created idoc type using trx we30 as a copy of RSSEND and added entry in table EDIMSG. Now, i could also create outbound parameter RSSEND with idoc type ZSSB006.
After performing the above steps i also replicated the datasources for the R3 Test source system, but its still showing above error.
I also checked the RSBASIDOC table in SCM test system. It has correct entry for my source system. But there is no such entry in RSBASIDOC table in the R3 test system.
Someone pls help me.
Regards,
Chintan

Hi
Need to restore the All Dalaload connection settings after refresh the system which either R/3 or SCM.
RSA1 -> select the Source system -> Right click -> Restore , It'll ask the connecon paramters like RFC , method of activations. Then check the connection test of the Source system .
Check the the note for further info...
Note 886102 - System Landscape Copy for SAP BW and NW BI
Hope halp you...
Regards,
Sureshram

Source System Problem after System Refresh

Hi,
We have R/3 4.7 Test source system created in our SCM 2007 Test System. The source system check was OK.
The R3 Test system was refreshed with Production data few days back and now my source system is not working. When i perform Source System check it says:
BI unknown in source system
BI IDoc type ZSSB006 is not the same as source system IDoc type
I performed following steps in R3 Test system after its system refresh:
1. Created logcal system and created RFC.
2. Created port in trx we21.
3. Created partner profile in trx we20.
4. For the outbound parameter RSSEND, I had to create idoc type that should be same as in my SCM system i.e. ZSSB006.
5. Created idoc type using trx we30 as a copy of RSSEND and added entry in table EDIMSG. Now, i could also create outbound parameter RSSEND with idoc type ZSSB006.
After performing the above steps i also replicated the datasources for the R3 Test source system, but its still showing above error.
I also checked the RSBASIDOC table in SCM test system. It has correct entry for my source system. But there is no such entry in RSBASIDOC table in the R3 test system.
Someone pls help me.
Regards,
Chintan

Hi Chintan,
Can you please check IDOC in your Target system. It should be the same type. Better you do the Partner profile steps.
Also please check have correctly created the idoc in Inbound or Outbound.
Consider the case like if its exist in BW as Out bound then its connected to Inbound IDOC of R/3 and vice a versa.
Please elaborate your refresh activites. Normally IDOC setting never get changed in you refresh activites.
Just check your BW system patch level and search for Notes.
Regards,
Mahesh

Unable to login in EP 6.0 after system refresh

Similar Messages

Maybe you are looking for