Unable to login into EBS and OID after integrating OID with EBS successfull

Hi,
We have succcessfully Integrated Oracle 11i with OID (OAS 10g) as per the note 233436.1, but we are not able to login thru EBS other then sysadmin user. At present no one is able to login through OID and EBS.
Regards,
Maggi.

Hi Helios,
Thanks for your reply, We have integrated OID with Microsoft AD and OID with EBS. When we try to create new users in both OID it was reflecting properly in EBS and even vice versa. But when we migrated the users between EBS to OID and vice versa using bulkload it completed sucessfully. Now at present we are not able to long through both OID and EBS. When ever we try to login, it asks for windows authentication by poping up a window asking for Username/Password.
Thanks,
Maggi.

Similar Messages

This content cannot be displayed in a frame after integrating Endeca with EBS R12.2

Hi,
I just integrated endeca with EBS R12.2 , after I ran option 6 (envSetup.sh) , bounced Studio Managed server , now I am not able to see data on eAM or Payable Dashboard.
when I click on Payable Dashboard , I get "This content cannot be displayed in a frame "
Did I miss any step ?
Thanks
sbt

Version Details :
EBS is on 12.2.4 version
Package Used :
Oracle E-Business Suite Extensions for Oracle Endeca, Release 12.2 V5
V44749-01_1of2.zip and V44749-01_2of2.zip

Unable to Login into APEX after upgrade from ORACLE XE to APEX 3.2

Hi,
I have upgraded Oracle 10g XE to with apex_3.2 on the Windows XP.
My ORACLE XE wa in folder "C:\ORACLE XE"
And APEX 3.2 in folder "C:\Ver 3.2\APEX"
Once you complete the standard install, i performd the following steps to complete
the upgrade which i got on my previous post.
Till normal installation i was able to login in Apex link and was able to run my application which was
in oracle XE but the only problem was i was unable to see any images in "EDIT PAGE" but my application was running well.
then i did following steps to get those images
Connect to SQL*Plus as SYS
@APEX_HOME/apex/apxldimg.sql APEX_HOME
@APEX_HOME/apex/apxxepwd.sql password
(where password is the password of the Application Express internal ADMIN account)
I chanbged image directory as below
FROM:
create directory APEX_IMAGES as ‘&1/apex/images’ ;
TO:
create directory APEX_IMAGES as ‘c:\oraclexe\apex\images’ and also tried ‘c:\ver 3.2\apex\images’;
Ran @apxldimg.sql
@apxxepwd.sql password (where password is the password of the Application Express internal ADMIN account)
Exit from the SQL*Plus session.
Change directory to c:\oraclexe\apex\owa, open the README.TXT file and follow the instructions within to complete the installation
But now i am unable to login into the page itself. It "showing Page Not Found"
Please kindly help me how to run APEX now through link.
Thanks in advance.
Thanks & Regards
Sanjay
Edited by: user11204334 on Aug 11, 2009 2:05 AM
Edited by: user11204334 on Aug 11, 2009 4:30 AM

Hi John,
Thanks for reply
I got error while doing following steps in few procedures
Change directory to c:\oraclexe\apex\owa, open the README.TXT file and follow the instructions within to complete the installation
Before doing the above step i was able to login into my application but without images
Can you please help that how to check those errors and any particular procedure you know which is responsible for the Login problem.
Thanks a Lot for help John
Thanks & Regards
Sanjay

Unable to login to apex as admin after apparent successful installation

I am unable to login to apex as admin after an apparent successful installation.
I have an existing Oracle database 11.2.0.1.0 with Oracle Text running on Windows 7 Professional with hundreds of gigabytes of free disk space available. I did everything as an operating system user with administrator privileges. I downloaded the latest version of apex 4.0.2 for all languages, unzipped the downloaded zip file, extracting all files to an apex directory. I changed the working directory to apex and started sql*plus, connected sys as sysdba, ran apexins.sql installation, apex_epg_config.sql and apexconf.sql configuration, apexchpwd.sql to change the admin password, and apxldimg.sql to copy the images, and exec dbms_xdb.sethttpport(8080), unlocked accounts, and granted connect privileges.
The installation log did not show any errors and included:
"Thank you for installing Oracle Application Express.
Oracle Application Express is installed in the APEX_040000 schema.
The structure of the link to the Application Express administration services is as follows:
http://host:port/pls/apex/apex_admin (Oracle HTTP Server with mod_plsql)
http://host:port/apex/apex_admin (Oracle XML DB HTTP listener with the embedded PL/SQL gateway)
The structure of the link to the Application Express development interface is as follows:
http://host:port/pls/apex (Oracle HTTP Server with mod_plsql)
http://host:port/apex (Oracle XML DB HTTP listener with the embedded PL/SQL gateway)
JOB_QUEUE_PROCESSES: 1000"
When I use either browser, Firefox 3.6.12 or Internet Explorer 8.0, and go to http://localhost:8080/apex/apex_admin I get a screen that says:
"Enter Application Express internal administration credentials"
and has boxes for a username and password. When I enter admin and the admin_password that I selected, then click on login nothing happens. I don't get logged in. I don't get an error message. It does not show any signs of anything running. It just sits there. I also don't get any messages from Windows or Norton 360 indicating that a pop-up window was blocked or any such thing. I checked that the services are running and also tried shutting down the computer and re-starting (cold boot), but was still unable to login.
I am a retired developer, not a DBA, so if there is anything else that I should do or check or provide, then please let me know. I have provided a copy and paste of everything that I could think of below. Oddly I don't see an admin user.
SQL> select * from v$version
2 /
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE     11.2.0.1.0     Production
TNS for 64-bit Windows: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
SQL> select status from dba_registry where comp_id = 'APEX'
2 /
STATUS
VALID
SQL> select username, account_status
2 from   dba_users
3 where username = 'ANONYMOUS'
4 or     username like 'APEX%'
5 or     upper (username) = 'ADMIN'
6 order by username
7 /
USERNAME                       ACCOUNT_STATUS
ANONYMOUS                      EXPIRED
APEX_030200                    EXPIRED
APEX_040000                    OPEN
APEX_PUBLIC_USER               OPEN
SQL> select dbms_xdb.gethttpport from dual
2 /
GETHTTPPORT
       8080
SQL> select owa_util.get_version from dual
2 /
GET_VERSION
10.1.2.0.8
SQL> show parameter memory_target
NAME                                 TYPE        VALUE
memory_target                        big integer 1536M
SQL>

Are you sure you did give right path to script ? Yes.
>
If you extract files to folder c:\temp, you have after that folder c:\temp\apex and bunch of sub folders.
For script to update images, you give path to folder where you did extract apex install files.
In above case that is then c:\temp .
>I created a directory c:\apex on my laptop. I downloaded the zip file to that directory. When I extracted the files to folder c:\apex, the result was c:\apex\apex with a bunch of sub folders and files. When I ran the script, I gave the path c:\apex as indicated in my copy and paste. So, I did everything the same as in the quote above, except that I used apex instead of temp.
Try extract Apex install zip to c:\temp and give c:\temp as path for scriptAre you suggesting that I redo the entire installation using c:\temp instead of c:\apex? What difference would that make? Would I need to do some sort of uninstall first?

Problem description: Computer takes a long time to fire up. Spinning ball is seen during start up, sometimes when login dialog box, and sometimes after entering login password. My mac freeze often, especially when using Lightroom-.

Problem description:
Computer takes a long time to fire up. Spinning ball is seen during start up, sometimes when login dialog box, and sometimes after entering login password. My mac freeze often, especially when using Lightroom….     Help is much appreciated!
EtreCheck version: 2.0.11 (98)
Report generated 3. november 2014 kl. 01.23.41 CET
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2010) (Verified)
MacBook Pro - model: MacBookPro7,1
1 2.4 GHz Intel Core 2 Duo CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1067 MHz ok
BANK 1/DIMM0
2 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 320M - VRAM: 256 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 2:49:19
Disk Information: ℹ️
Samsung SSD 840 EVO 500GB disk0 : (500,11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (260.35 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
MATSHITADVD-R   UJ-898
USB Information: ℹ️
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Apple Inc. Apple Internal Keyboard / Trackpad
Configuration files: ℹ️
/etc/sysctl.conf - Exists
/etc/hosts - Count: 15
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/IPVanish.app
[not loaded] foo.tap (1.0) Support
[not loaded] foo.tun (1.0) Support
/Applications/LaCie Desktop Manager.app
[not loaded] com.LaCie.ScsiType00 (1.2.13 - SDK 10.5) Support
[not loaded] com.jmicron.driver.jmPeripheralDevice (2.0.4) Support
[not loaded] com.lacie.driver.LaCie_RemoteComms (1.0.1 - SDK 10.5) Support
[not loaded] com.oxsemi.driver.OxsemiDeviceType00 (1.28.13 - SDK 10.5) Support
/Applications/Private Eye.app
[loaded] com.radiosilenceapp.nke.PrivateEye (1 - SDK 10.7) Support
/Library/Application Support/HASP/kexts
[not loaded] com.aladdin.kext.aksfridge (1.0.2) Support
/System/Library/Extensions
[loaded] com.hzsystems.terminus.driver (4) Support
[not loaded] com.nvidia.CUDA (1.1.0) Support
[not loaded] com.roxio.BluRaySupport (1.1.6) Support
[not loaded] com.sony.filesystem.prodisc_fs (2.3.0) Support
[not loaded] com.sony.protocol.prodisc (2.3.0) Support
/Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
[not loaded] com.roxio.TDIXController (2.0) Support
Startup Items: ℹ️
CUDA: Path: /System/Library/StartupItems/CUDA
ProTec6b: Path: /Library/StartupItems/ProTec6b
Startup items are obsolete and will not work in future versions of OS X
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[running] com.adobe.AdobeCreativeCloud.plist Support
[loaded] com.adobe.CS5ServiceManager.plist Support
[running] com.digitalrebellion.EditmoteListener.plist Support
[loaded] com.google.keystone.agent.plist Support
[loaded] com.intego.backupassistant.agent.plist Support
[running] com.mcafee.menulet.plist Support
[invalid?] com.mcafee.reporter.plist Support
[loaded] com.nvidia.CUDASoftwareUpdate.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.orbicule.WitnessUserAgent.plist Support
[loaded] com.xrite.device.softwareupdate.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[invalid?] com.adobe.SwitchBoard.plist Support
[running] com.aladdin.aksusbd.plist Support
[failed] com.aladdin.hasplmd.plist Support
[running] com.edb.launchd.postgresql-8.4.plist Support
[loaded] com.google.keystone.daemon.plist Support
[running] com.intego.BackupAssistant.daemon.plist Support
[loaded] com.ipvanish.helper.openvpn.plist Support
[loaded] com.ipvanish.helper.pppd.plist Support
[invalid?] com.mcafee.ssm.ScanFactory.plist Support
[invalid?] com.mcafee.ssm.ScanManager.plist Support
[running] com.mcafee.virusscan.fmpd.plist Support
[loaded] com.mvnordic.mvlicensehelper.offline.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[running] com.orbicule.witnessd.plist Support
[loaded] com.radiosilenceapp.nke.PrivateEye.plist Support
[running] com.xrite.device.xrdd.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.ARM.[...].plist Support
[invalid?] com.digitalrebellion.SoftwareUpdateAutoCheck.plist Support
[loaded] com.facebook.videochat.[redacted].plist Support
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
[running] com.spotify.webhelper.plist Support
User Login Items: ℹ️
Skype Program (/Applications/Skype.app)
GetBackupAgent Program (/Users/[redacted]/Library/Application Support/BeLight Software/Get Backup 2/GetBackupAgent.app)
PhoneViewHelper Program (/Users/[redacted]/Library/Application Support/PhoneView/PhoneViewHelper.app)
EarthDesk Core UNKNOWN (missing value)
Dropbox Program (/Applications/Dropbox.app)
AdobeResourceSynchronizer ProgramHidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
i1ProfilerTray Program (/Applications/i1Profiler/i1ProfilerTray.app)
Internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 6.0 Support
Default Browser: Version: 600 - SDK 10.10
AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 Support
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0
SiteAdvisor: Version: 2.0 - SDK 10.1 Support
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
GarminGPSControl: Version: 3.0.1.0 Release - SDK 10.4 Support
JavaAppletPlugin: Version: Java 7 Update 71 Check version
User Internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 6.2 Support
F5 Inspection Host Plugin: Version: 6031.2010.0122.1 Support
f5 sam inspection host plugin: Version: 7000.2010.0602.1 Support
Safari Extensions: ℹ️
Facebook Cleaner
Better Facebook
SiteAdvisor
Incognito
Bing Highlights
YouTube5
AdBlock
YoutubeWide
Audio Plug-ins: ℹ️
DVCPROHDAudio: Version: 1.3.2
3rd Party Preference Panes: ℹ️
CUDA Preferences Support
EarthDesk Support
Editmote Support
Flash Player Support
FUSE for OS X (OSXFUSE) Support
Growl Support
Java Support
Witness Support
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
      13% taskgated
      12% WindowServer
      1% WitnessUserAgent
      1% sysmond
      1% Activity Monitor
Top Processes by Memory: ℹ️
327 MB com.apple.WebKit.WebContent
137 MB softwareupdated
94 MB Safari
82 MB VShieldScanner
82 MB Dock
Virtual Memory Information: ℹ️
65 MB Free RAM
1.58 GB Active RAM
1.54 GB Inactive RAM
647 MB Wired RAM
2.95 GB Page-ins
260 MB Page-outs

You have SCADS of extensions and the things running. McAfee, Intego, Orbicule, CleanMyMac, and others I've not ever even heard of. My first recommendation would be to remove all of these and see if things improve.

HP G 42 UNABLE TO RECOVER OLD DATA AND FOLDERS AFTER I RAN RECOVERY TO FACTORY SETTINGS

HP G 42 UNABLE TO RECOVER OLD DATA AND FOLDERS AFTER I RAN RECOVERY TO FACTORY SETTINGS

Factory restore erases everyting on the drive, if you did not back up first, they are gone forever.

Last week i bought a macair. was unable to login to yahoomail and hotmail from safari. Can someone help

last week i bought macair. was unable to login to yahoomail and hotmail thru safari or even firefox. can some one help.

i set up the machine the first time i used it and logged in...got on to safari to login to yahoomail then hotmail. in both cases i get the message that the username/password is incorrect...
i am able to logon to gmail though
with same user name and password i am able to login when i use windows

ALE/IDOC and RFC/BAPI Integration Scenarios with SAP DS for ESA v3

Hi,
we are planning two PoCs of Integration Plattforms. One of our major requirement set is SAP Integration into our existing SOA.
Because we also have R/3 4.7 Systems in production, we are planning to test ALE/IDOC and RFC/BAPI Integration scenarios with these Integration Plattforms.
My question is:
We are looking for are smart solution to get a SAP Test Environment, where we can test ALE/IDOC und RFC/BAPI Integration scenarios.
It is possible to do this with SAP DS for ESA v3 or shall we better use IDES for that purpose?
Best regards,
Steven

Hi Abhishek,
This is our scenario. We are doing an integration of SAP HR r/3 system with the CRM system. We need housing information details of the employees which we have in custom infotype 9310 in SAP HR system and we need those details in the CRM system. So am planning out for an ALE/IDOC approach for the integration and gonna maintain the 9310 details in a custom table. In the CRM system, we gonna build a BOL layer for accessing the 9310 details. Also i'm preparing a HLD for this process. I wanna read and go through few same HLD's before i submit my proposal to my client. Please suggest me and help me out.
Thanks in advance.
Regards,
Arunmozhi.

SOLVED - Unable to login into xfce after upgrade

I upgraded my Arch computer. When rebooting I get SLIM and can enter my login/password but can go any further as it loops back to SLIM. I've read another post on consolekit & HAL.
I have consolekit 0.4.1-2 and HAL 0.5.14-1. SLIM gets started via /etc/inittab
id:5:initdefault:
x:5:respawn:/usr/bin/slim >& /dev/null
And my .xinitrc looks like:
#!bin/sh
exec ck-launch-session startxfce4
It has been working for months this way. Too bad to be stuck today.
Any hint on how I can debug this issue?
Thanks
Alphazo
---> ANSWER IS HERE:
http://bbs.archlinux.org/viewtopic.php?id=86747
Just had to
sudo rm ~/.ICEauthority
and rebooted.
COOL... That didn't even give me enough time to get nervous.
EDIT
I killed SLIM and tried to launch 'startx'. I don't know how to copy/paste from the command line but what I see is :
(EE) Failed to load module "fbdev" (module does not exist, 0)
xf86TokenToOptInfo: table is NULL
(EE) config/hal: couldn't find input devices: org.freedesktop.DBus.Error.AccessDenied (Rejected send message, 1 matched rules; type="method_call", sender.........
<stdin>3: error: Unknown #directive "Xft"
EDIT2
Here is a copy of the log files after rebooting:
/var/log/slim.log
/usr/bin/xauth: creating new authority file /var/run/slim.auth
slim: waiting for X server to begin accepting connections
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.7.3.901 (1.7.4 RC 1)
Release Date: 2009-12-11
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-ARCH i686
Current Operating System: Linux ARCH-DN 2.6.31-ARCH #1 SMP PREEMPT Tue Nov 10 19:48:17 CET 2009 i686
Kernel command line: root=/dev/disk/by-uuid/046d7122-21a4-47df-8f19-3fb5ebec9192 ro vga=773
Build Date: 12 December 2009 12:59:40PM
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 24 19:46:20 2009
(==) Using default built-in configuration (30 lines)
.(EE) Failed to load module "fbdev" (module does not exist, 0)
xf86TokenToOptinfo: table is NULL
xf86TokenToOptinfo: table is NULL
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Multiple doodads named ""
> Using first definition
> Warning: Multiple doodads named ""
> Using first definition
> Warning: Multiple doodads named ""
> Using first definition
> Warning: Multiple doodads named ""
> Using first definition
> Warning: Multiple doodads named ""
> Using first definition
> Warning: Multiple doodads named ""
> Using first definition
Errors from xkbcomp are not fatal to the X server
/usr/bin/xauth: creating new authority file /home/dnativel/.Xauthority
/usr/bin/startxfce4: X server already running on display :0.0
<stdin>:1: error: Unknown #directive "Those"
# Those are fallback settings, use the ui plugin to change it
<stdin>:2: error: Unknown #directive "or"
# or add your overrides to ~/.Xresources
<stdin>:3: error: Unknown #directive "Xft"
# Xft.hintstyle: hintnone/hintslight/hintmedium/hintfull
<stdin>:4: error: Unknown #directive "Xft"
# Xft hinting: 1/0
4 errors in preprocessor.
xrdb: "Xft.hinting" on line 9 overrides entry on line 6
xrdb: "Xft.hintstyle" on line 11 overrides entry on line 7
Agent pid 3015
xfce4-session: Unable to access file /home/dnativel/.ICEauthority: Permission non accord√©e
Agent pid 3015 killed
slim: waiting for X server to shut down.
/usr/bin/xauth: creating new authority file /var/run/slim.auth
slim: waiting for X server to begin accepting connections
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.7.3.901 (1.7.4 RC 1)
Release Date: 2009-12-11
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-ARCH i686
Current Operating System: Linux ARCH-DN 2.6.31-ARCH #1 SMP PREEMPT Tue Nov 10 19:48:17 CET 2009 i686
Kernel command line: root=/dev/disk/by-uuid/046d7122-21a4-47df-8f19-3fb5ebec9192 ro vga=773
Build Date: 12 December 2009 12:59:40PM
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 24 19:46:56 2009
(==) Using default built-in configuration (30 lines)
(EE) Failed to load module "fbdev" (module does not exist, 0)
xf86TokenToOptinfo: table is NULL
xf86TokenToOptinfo: table is NULL
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Multiple doodads named ""
> Using first definition
> Warning: Multiple doodads named ""
> Using first definition
> Warning: Multiple doodads named ""
> Using first definition
> Warning: Multiple doodads named ""
> Using first definition
> Warning: Multiple doodads named ""
> Using first definition
> Warning: Multiple doodads named ""
> Using first definition
Errors from xkbcomp are not fatal to the X server
/var/log/Xorg.0.log
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.7.3.901 (1.7.4 RC 1)
Release Date: 2009-12-11
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-ARCH i686
Current Operating System: Linux ARCH-DN 2.6.31-ARCH #1 SMP PREEMPT Tue Nov 10 19:48:17 CET 2009 i686
Kernel command line: root=/dev/disk/by-uuid/046d7122-21a4-47df-8f19-3fb5ebec9192 ro vga=773
Build Date: 12 December 2009 12:59:40PM
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 24 19:46:56 2009
(II) Loader magic: 0x81e4c60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7
(--) PCI:*(0:0:2:0) 8086:27a2:1028:0201 Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xeff00000/524288, 0xd0000000/268435456, 0xefec0000/262144, I/O @ 0x0000eff8/8
(--) PCI: (0:0:2:1) 8086:27a6:1028:0201 Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xeff80000/524288
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
Section "Device"
Identifier "Builtin Default intel Device 0"
Driver "intel"
EndSection
Section "Screen"
Identifier "Builtin Default intel Screen 0"
Device "Builtin Default intel Device 0"
EndSection
Section "Device"
Identifier "Builtin Default vesa Device 0"
Driver "vesa"
EndSection
Section "Screen"
Identifier "Builtin Default vesa Screen 0"
Device "Builtin Default vesa Device 0"
EndSection
Section "Device"
Identifier "Builtin Default fbdev Device 0"
Driver "fbdev"
EndSection
Section "Screen"
Identifier "Builtin Default fbdev Screen 0"
Device "Builtin Default fbdev Device 0"
EndSection
Section "ServerLayout"
Identifier "Builtin Default Layout"
Screen "Builtin Default intel Screen 0"
Screen "Builtin Default vesa Screen 0"
Screen "Builtin Default fbdev Screen 0"
EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default intel Screen 0" (0)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default intel Device 0"
(==) No monitor specified for screen "Builtin Default intel Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (1)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (2)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AutoAddDevices.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.3.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.3.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.3.901, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 2.9.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.7.0.901, module version = 2.2.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 00@00:02:0
(WW) Falling back to old probe method for vesa
(WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.7.3.901, module version = 0.1.0
ABI class: X.Org Video Driver, version 6.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) intel(0): Creating default Display subsection in Screen section
"Builtin Default intel Screen 0" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
(--) intel(0): Chipset: "945GM"
(--) intel(0): Linear framebuffer at 0xD0000000
(--) intel(0): IO registers at addr 0xEFF00000 size 524288
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(II) intel(0): the SDVO device with slave addr 70 is found on DVO 1 port
(II) intel(0): 2 display pipes available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA has no monitor section
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "LCD", prod id 14086
xf86TokenToOptinfo: table is NULL
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
(II) intel(0): I2C bus "SDVOB DDC Bus" initialized.
(II) intel(0): Output TMDS-1 has no monitor section
(II) intel(0): SDVOB: device VID/DID: 04:AA.03, clock range 25.0MHz - 165.0MHz
(II) intel(0): SDVOB: 1 input channel
(II) intel(0): SDVOB: TMDS0 output reported
xf86TokenToOptinfo: table is NULL
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
(II) intel(0): No SDVO device found on SDVOC
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(0): Output TV has no monitor section
(II) intel(0): Current clock rate multiplier: 1
(II) intel(0): EDID vendor "LCD", prod id 14086
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Output TMDS-1 disconnected
(II) intel(0): Output TV disconnected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS using initial mode 1280x800
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(II) intel(0): detected 256 kB GTT.
(II) intel(0): detected 7932 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.3.901, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x61110 (PORT_HOTPLUG_EN) changed from 0x00000000 to 0x00000020
(WW) intel(0): Register 0x61114 (PORT_HOTPLUG_STAT) changed from 0x00000000 to 0x00000400
(WW) intel(0): Register 0x70024 (PIPEASTAT) changed from 0x00000000 to 0x00000203
(WW) intel(0): PIPEASTAT before: status:
(WW) intel(0): PIPEASTAT after: status: VSYNC_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS
(WW) intel(0): Register 0x71024 (PIPEBSTAT) changed from 0x00000202 to 0x80000202
(WW) intel(0): PIPEBSTAT before: status: VSYNC_INT_STATUS VBLANK_INT_STATUS
(WW) intel(0): PIPEBSTAT after: status: FIFO_UNDERRUN VSYNC_INT_STATUS VBLANK_INT_STATUS
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
(==) Depth 24 pixmap format is 32 bpp
(II) intel(0): Kernel reported 488960 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 1955836 kB available
(II) intel(0): [DRI2] Setup complete
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) UXA(0): Driver registered support for the following operations:
(II) solid
(II) copy
(II) composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): Current clock rate multiplier: 1
(II) intel(0): adjusting plane->pipe mappings to allow for framebuffer compression
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x005fffff: compressed frame buffer (6144 kB, 0x000000007f800000 physical
(II) intel(0): 0x00600000-0x00600fff: compressed ll buffer (4 kB, 0x000000007fe00000 physical
(II) intel(0): 0x00601000-0x0060afff: HW cursors (40 kB, 0x000000007fe01000 physical
(II) intel(0): 0x0060b000-0x0060bfff: overlay registers (4 kB, 0x000000007fe0b000 physical
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0f9f3fff: DRI memory manager (248020 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB) X tiled
(II) intel(0): 0x0f9f4000: end of memory manager
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane B is now disabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane A is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): Output TMDS-1 is connected to pipe none
(II) intel(0): Output TV is connected to pipe none
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(==) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: DRI2 Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 338 x 211
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "fr"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device AlpsPS/2 ALPS DualPoint TouchPad
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 1.2.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(II) Synaptics touchpad driver version 1.2.1
(**) Option "Device" "/dev/input/event8"
(II) AlpsPS/2 ALPS DualPoint TouchPad: x-axis range 0 - 1023
(II) AlpsPS/2 ALPS DualPoint TouchPad: y-axis range 0 - 767
(II) AlpsPS/2 ALPS DualPoint TouchPad: pressure range 0 - 127
(II) AlpsPS/2 ALPS DualPoint TouchPad: finger width range 0 - 0
(II) AlpsPS/2 ALPS DualPoint TouchPad: buttons: left right middle
(**) Option "TapButton1" "1"
(**) Option "TapButton2" "2"
(**) Option "TapButton3" "3"
(--) AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
(**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
(II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint TouchPad" (type: TOUCHPAD)
(**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) keeping acceleration scheme 1
(**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration profile 0
(--) AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
(II) config/hal: Adding input device DualPoint Stick
(**) DualPoint Stick: always reports core events
(**) DualPoint Stick: Device: "/dev/input/event7"
(II) DualPoint Stick: Found 3 mouse buttons
(II) DualPoint Stick: Found relative axes
(II) DualPoint Stick: Found x and y relative axes
(II) DualPoint Stick: Configuring as mouse
(**) DualPoint Stick: YAxisMapping: buttons 4 and 5
(**) DualPoint Stick: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "DualPoint Stick" (type: MOUSE)
(**) DualPoint Stick: (accel) keeping acceleration scheme 1
(**) DualPoint Stick: (accel) acceleration profile 0
(II) DualPoint Stick: initialized for relative axes.
(II) config/hal: Adding input device Sleep Button
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event4"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "fr"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "fr"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event6"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "fr"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event5"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "fr"
(II) AIGLX: Suspending AIGLX clients for VT switch
Last edited by alphazo (2009-12-25 00:04:20)

Hi John,
Thanks for reply
I got error while doing following steps in few procedures
Change directory to c:\oraclexe\apex\owa, open the README.TXT file and follow the instructions within to complete the installation
Before doing the above step i was able to login into my application but without images
Can you please help that how to check those errors and any particular procedure you know which is responsible for the Login problem.
Thanks a Lot for help John
Thanks & Regards
Sanjay

Unable to login into the solaris 10 box

I installed security patches through UCE. After that I rebooted the machine and now I see these messages after going through the ok> prompt. "Pending jobs"
"Syching files done" "Resetting". Then the machine reboots. After going throught ok> prompt I see the messages "Pending job has finished"
"Safety reboot with reconfigure was done".
Now when I get to the login screen I enter my username and password. It accepts its and then after like five seconds it brings me back to the login screen. I tried logging in as root same problem. I can telnet into my machine fine from another machine.
Any ideas?

This particular error occurs when the firewall or some other monitoring tool drops the end user connection after being idle for a predefined amount of time. Please get in touch with your network administrator and check these settings.
Apart from this, it could also be that you are facing a bug in Oracle but without version information, we cannot comment on that.

Unable to sign into iCloud on AppleTV after update

After the last OS update on my AppleTV, I am unable to sign into my iCloud in order to setup my photostream as the screensaver. I go to iCloud sign in, put in my password, at which point it takes me to the Terms and Conditions page, I click on Agree, but nothing happens....it's just stuck on the "agree" page... any ideas????? thank you

I would suggest to restore Apple TV again to factory settings.

Unable to login to iTunes (from appleTV) after apple ID two step verification enabled

I recently enabled two step verification for appleID. Now when I attempt to use that appleID with my appleTV, I am unable to login to iTunes. Should I not have enabled two step verification ? Do I need to revert back to user name / password only for my appleID, which I use in conjunction with my appleTV ?
help
brianb

dis-regard this problem. I was able to regain normal operation, once I reset my appleTV, and re-configured it using my current appleID. It is rather odd though that I need to re-set my appleTV each time I change my appleID.

Unable to Login into BI Portal

Hello SAP Experts!
We have installed BI 7.0. During installation we have selected EP and EPcore components also. Now when i am trying to login into the portal with Url : http://<IP_Address>:5000/irj/portal, i am getting,
Java iView Runtime. Please, can anyone throw some light on this issue.
Thanks a lot
Regards
Vanitha

Hello Van,
Do provide more details on this by providing the trace of this particular error. Look into:
C:\usr\sap\<SID>\JC00\j2ee\cluster\server0\log for example... and open the default trace file (latest) and check the latest entry..
Right off the bat, since it's a new installation - portal performance issue would have to be considered as a possible cause.
Regards,
Jan

HT1414 had my ipad plugged in all night and went to turn on this morning and nothing comes on. plugged into computer and it doesn't sync with itunes. what's wrong and what do i do?

Had my ipad plugged in to charge all night went to turn it on this morning and can't turn it on. plugged into computer and didn't sync either. What do i do?

What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
 Cheers, Tom

Integrating OBIEE with EBS -   not logged in to the Oracle BI Server

I have followed Metalink Note 552735.1 to integrate OBIEE with EBS R12. In addition I followed the forum threads such as
OBIA 7.9.5 EBS Integration Not Logged On nQSError 43001 Authentication Fail
on additional steps.
After launching the url from EBS, I get the following error message:
Not Logged In
You are not currently logged in to the Oracle BI Server.
If you have already logged in, your connection might have timed out, or a communications or server error may have occurred.
My saw0log.log file is showing the following message. My BI Server is up and I'm not sure where I need to change the localhost in my config files.
Odbc driver returned an error (SQLDriverConnectW).
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred.
[nQSError: 12008] Unable to connect to port 9703 on machine LOCALHOST.
[nQSError: 12010] Communication error connecting to remote end point: address = LOCALHOST; port = 9703.
[nQSError: 12002] Socket communication error at call=: (Number=-1) Error -1 occurred. (HY000)
Type: Error
Severity: 42
Time: Mon Sep 21 15:28:12 2009
File: project/webconnect/connection.cpp Line: 294
Properties: ThreadID-3599
Location:
     saw.connectionPool.getConnection
     saw.subsystem.security.checkAuthenticationImpl
     saw.threadPool
     saw.threads
Error connecting to the Oracle BI Server: Could not connect to the Oracle BI Server because it is not running or is inaccessible. Please contact your system administrator.
Odbc driver returned an error (SQLDriverConnectW).
Type: Error
Severity: 42
Time: Mon Sep 21 15:29:07 2009
File: project/webxml/saxreader.cpp Line: 559
Properties: ThreadID-1286;HttpCommand-Dashboard;Proxy-;RemoteIP-152.140.65.68;User-;Impersonator-
Location:
     saw.httpserver.request
     saw.rpc.server.responder
     saw.rpc.server
     saw.rpc.server.handleConnection
     saw.rpc.server.dispatch
     saw.threadPool
     saw.threads
Can anyone please advise on this? Thanks in advance.

We resolved the localhost issue but still receive the not logged in to the Oracle BI Server message.
Now this is what shows in our saw0log.log:
Odbc driver returned an error (SQLDriverConnectW).
State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused.
[nQSError: 43001] Authentication failed for in repository Star: invalid user/password. (08004)
Type: Error
Severity: 42
Time: Mon Sep 21 16:40:09 2009
File: project/webconnect/connection.cpp Line: 276
Properties: ThreadID-6169
Location:
     saw.connectionPool.getConnection
     saw.subsystem.security.checkAuthenticationImpl
     saw.threadPool
     saw.threads
Authentication Failure.
Odbc driver returned an error (SQLDriverConnectW).
Type: Error
Severity: 42
Time: Mon Sep 21 16:41:07 2009
File: project/webxml/saxreader.cpp Line: 559
Properties: ThreadID-2057;HttpCommand-Dashboard;Proxy-;RemoteIP-152.140.65.145;User-;Impersonator-
Location:
     saw.httpserver.request
     saw.rpc.server.responder
     saw.rpc.server
     saw.rpc.server.handleConnection
     saw.rpc.server.dispatch
     saw.threadPool
     saw.threads
Sax parser returned an exception.
Message: Expected an element name, Entity publicId: /u01/obi/obid1/OracleBI/web/msgdb/messages/controlmessages.xml, Entity systemId: , Line number: 7, Column number: 44
Type: Warning
Severity: 40
Time: Mon Sep 21 16:41:07 2009
File: project/websubsystems/messagetablemanager.cpp Line: 117
Properties: ThreadID-2057;HttpCommand-Dashboard;Proxy-;RemoteIP-152.140.65.145;User-;Impersonator-
Location:
     saw.httpserver.request
     saw.rpc.server.responder
     saw.rpc.server
     saw.rpc.server.handleConnection
     saw.rpc.server.dispatch
     saw.threadPool
     saw.threads
Error loading XML Message File (/u01/obi/obid1/OracleBI/web/msgdb/messages/controlmessages.xml): Sax parser returned an exception.
Message: Expected an element name, Entity publicId: /u01/obi/obid1/OracleBI/web/msgdb/messages/controlmessages.xml, Entity systemId: , Line number: 7, Column number: 44
Error Codes: UH6MBRBC

Unable to login into EBS and OID after integrating OID with EBS successfull

Similar Messages

Maybe you are looking for