Unable to login into Essbase server
Hi all,
I have installed Shared services and Essbase, I did "Externalize Users" in Essbase. It happened successfully. My understanding on this Externalize user is
"Essbase runs in Shared Services mode and in this mode Essbase create, Edit User permission becomes obsolete. You must be an Essbase administrator to manage users, and you must additionally be a Shared Services administrator to manage users from Shared Services"
Is this correct please validate. If this is correct, then if you change the password in shared services and sync the native directory in shared services, Essbase should work with new password but this is not happening when i try to connect the Essbase server it is throwing the below error.
"Error: 1051293: Login fails due to invalid login credentials"
Is there any other activity that has to be done in this process. I dont have clear idea on this Externalize users can any one explain.
Can any one help me in this urgent issue.
Regards,
Ramachandran J
Hi All,
Thanks for the reply. I have few more doubts.
At the time of configuring the Shared services the default login will be admin and password. But when i configure the Essbase with Shared services in Configuration Utility i had given the different user name as "essadmin".
So i have followed the following steps to do Externalize users in Essbase:-
1. Just created the same "essadmin" user in shared services
2. Done externalize users in Administration services first inside Essbase console, while doing that i have given my own password.
3. Then went into the specific Essbase server and right clicked security and externalized users there, here also while doing that i have given my own password.
By doing this step externalize users worked successfully and i can sink the user with shared services.
Can you let me know whether the above steps are correct or any other procedure is available??
And i have one more doubt....
Once externalize users has been done, all the essbase sample database and Analytic services got migrated to Shared services. Then i have created new planning application which reflected in both essbase and shared services.
Then i loged into shared services and created a new user, then granted only one specific sample application and planning application to that user and sinc with database and also i loged into planning application and refreshed database.
Then i logged into essbase with the newely created username and password... but i noticed that there is no Essbase server available with the new user login. So i added the same essbase server with "external authentation" ticked.
Once this is done all the availble application appeared in his login, Here it has Not restricted only to the applicaiton which i have given access to that user, it is showing all the application and also allowing to edit the application.
I just want to restrict a particular application to one particular user to edit the outline in essbase and this has to be acheived by giving access restriction in shared services.... now i am unable to acheive the same. Can any one help me in doing so???
Regards,
Ramachandran J
Similar Messages
-
I am unable to connect to Essbase Server 11.1.1.3
Hi
Can anyone help me to solve this Essbase server Error. I am unable to connect to Essbase Server 11.1.1.3
2010-05-10 11:35:49,359 INFO [main] CSS is initialized as client. The default logger properties will be loaded com.hyperion.css.CSSSystem.<init>(Unknown Source)
2010-05-10 11:35:49,515 INFO [main] CSS Log file will be generated at C:\Hyperion\logs\essbase\SharedServices_Security_Client.log com.hyperion.css.CSSSystem.<init>(Unknown Source)
2010-05-10 11:35:49,515 INFO [main] Configure CSS with registry com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
2010-05-10 11:35:49,515 INFO [main] Initializing CSS from Registry. com.hyperion.css.common.configuration.CSSConfigurationManager.getConfiguration(Unknown Source)
2010-05-10 11:35:49,734 INFO [main] Trying to get Registry Instance com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
2010-05-10 11:36:01,609 INFO [main] Got Registry Instance com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
2010-05-10 11:36:04,625 INFO [main] Got hub location from Registry:http://D26085.arrownao.corp.arrow.com:28080 com.hyperion.css.registry.RegistryManager.getHubLocationFromRegistry(Unknown Source)
2010-05-10 11:36:05,312 INFO [main] Got native directory location from Registry:D26085.arrownao.corp.arrow.com:28089 com.hyperion.css.registry.RegistryManager.getNativeProviderLocationFromRegistry(Unknown Source)
2010-05-10 11:36:05,312 INFO [main] URL constructed out of values in Registry database:ldap://D26085.arrownao.corp.arrow.com:28089/dc=css,dc=hyperion,dc=com com.hyperion.css.common.configuration.CSSConfigurationImplXML.initConfiguration(Unknown Source)
2010-05-10 11:36:08,734 ERROR [main] 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
2010-05-10 11:36:09,718 ERROR [main] 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
2010-05-10 11:36:09,718 WARN [main] Failed to instantiate provider for factory: com.hyperion.css.spi.impl.nv.NativeFactory.[Root Cause: 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089. ] com.hyperion.css.spi.CSSManager.getProvider(Unknown Source)
2010-05-10 11:36:09,718 WARN [main] Native Directory is not reachable. Attempting to re-connect... com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
2010-05-10 11:36:09,718 WARN [main] Number Format Exception converting nullto int; Returning default value 10[Root Cause: null ] com.hyperion.css.common.CSSUtils.toInt(Unknown Source)
2010-05-10 11:36:09,718 WARN [main] Number Format Exception converting nullto int; Returning default value 3[Root Cause: null ] com.hyperion.css.common.CSSUtils.toInt(Unknown Source)
2010-05-10 11:36:11,750 ERROR [main] 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
2010-05-10 11:36:12,750 ERROR [main] 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
2010-05-10 11:36:12,781 WARN [main] Failed to instantiate provider for factory: com.hyperion.css.spi.impl.nv.NativeFactory.[Root Cause: 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089. ] com.hyperion.css.spi.CSSManager.getProvider(Unknown Source)
2010-05-10 11:36:12,781 WARN [main] Native Directory is not reachable. Will try to re-connect after 3 seconds... com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
2010-05-10 11:36:15,781 WARN [main] Attempting to connect to Native Directory: Retry Count: 1 com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
2010-05-10 11:36:17,781 ERROR [main] 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
2010-05-10 11:36:18,890 ERROR [main] 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
2010-05-10 11:36:18,890 WARN [main] Failed to instantiate provider for factory: com.hyperion.css.spi.impl.nv.NativeFactory.[Root Cause: 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089. ] com.hyperion.css.spi.CSSManager.getProvider(Unknown Source)
2010-05-10 11:36:18,890 WARN [main] Native Directory is not reachable. Will try to re-connect after 3 seconds... com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
2010-05-10 11:36:21,890 WARN [main] Attempting to connect to Native Directory: Retry Count: 2 com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
2010-05-10 11:36:23,812 ERROR [main] 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
2010-05-10 11:36:24,921 ERROR [main] 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
2010-05-10 11:36:24,921 WARN [main] Failed to instantiate provider for factory: com.hyperion.css.spi.impl.nv.NativeFactory.[Root Cause: 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089. ] com.hyperion.css.spi.CSSManager.getProvider(Unknown Source)
2010-05-10 11:36:24,921 WARN [main] Native Directory is not reachable. Will try to re-connect after 3 seconds... com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
2010-05-10 11:36:28,046 WARN [main] Attempting to connect to Native Directory: Retry Count: 3 com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
2010-05-10 11:36:30,046 ERROR [main] 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
2010-05-10 11:36:31,062 ERROR [main] 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
2010-05-10 11:36:31,062 WARN [main] Failed to instantiate provider for factory: com.hyperion.css.spi.impl.nv.NativeFactory.[Root Cause: 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089. ] com.hyperion.css.spi.CSSManager.getProvider(Unknown Source)
2010-05-10 11:36:31,062 WARN [main] Native Directory is not reachable. Will try to re-connect after 3 seconds... com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
2010-05-10 11:36:34,062 WARN [main] Attempting to connect to Native Directory: Retry Count: 4 com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
2010-05-10 11:36:36,078 ERROR [main] 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
2010-05-10 11:36:37,093 ERROR [main] 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
2010-05-10 11:36:37,093 WARN [main] Failed to instantiate provider for factory: com.hyperion.css.spi.impl.nv.NativeFactory.[Root Cause: 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089. ] com.hyperion.css.spi.CSSManager.getProvider(Unknown Source)
2010-05-10 11:36:37,093 WARN [main] Native Directory is not reachable. Will try to re-connect after 3 seconds... com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
2010-05-10 11:36:40,093 WARN [main] Attempting to connect to Native Directory: Retry Count: 5 com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
2010-05-10 11:36:41,921 ERROR [main] 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
2010-05-10 11:36:42,921 ERROR [main] 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
2010-05-10 11:36:42,921 WARN [main] Failed to instantiate provider for factory: com.hyperion.css.spi.impl.nv.NativeFactory.[Root Cause: 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089. ] com.hyperion.css.spi.CSSManager.getProvider(Unknown Source)
2010-05-10 11:36:42,921 WARN [main] Native Directory is not reachable. Will try to re-connect after 3 seconds... com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
2010-05-10 11:36:45,921 WARN [main] Attempting to connect to Native Directory: Retry Count: 6 com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
2010-05-10 11:36:47,953 ERROR [main] 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
2010-05-10 12:32:48,375 INFO [main] CSS is initialized as client. The default logger properties will be loaded com.hyperion.css.CSSSystem.<init>(Unknown Source)
2010-05-10 12:32:48,531 INFO [main] CSS Log file will be generated at C:\Hyperion\logs\essbase\SharedServices_Security_Client.log com.hyperion.css.CSSSystem.<init>(Unknown Source)
2010-05-10 12:32:48,531 INFO [main] Configure CSS with registry com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
2010-05-10 12:32:48,531 INFO [main] Initializing CSS from Registry. com.hyperion.css.common.configuration.CSSConfigurationManager.getConfiguration(Unknown Source)
2010-05-10 12:32:48,796 INFO [main] Trying to get Registry Instance com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
2010-05-10 12:33:00,984 INFO [main] Got Registry Instance com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
2010-05-10 12:33:03,453 INFO [main] Got hub location from Registry:http://D26085.arrownao.corp.arrow.com:28080 com.hyperion.css.registry.RegistryManager.getHubLocationFromRegistry(Unknown Source)
2010-05-10 12:33:05,312 INFO [main] Got native directory location from Registry:D26085.arrownao.corp.arrow.com:28089 com.hyperion.css.registry.RegistryManager.getNativeProviderLocationFromRegistry(Unknown Source)
2010-05-10 12:33:05,312 INFO [main] URL constructed out of values in Registry database:ldap://D26085.arrownao.corp.arrow.com:28089/dc=css,dc=hyperion,dc=com com.hyperion.css.common.configuration.CSSConfigurationImplXML.initConfiguration(Unknown Source)
2010-05-10 12:33:09,265 ERROR [main] 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
2010-05-10 12:33:10,234 ERROR [main] 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
2010-05-10 12:33:10,234 WARN [main] Failed to instantiate provider for factory: com.hyperion.css.spi.impl.nv.NativeFactory.[Root Cause: 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089. ] com.hyperion.css.spi.CSSManager.getProvider(Unknown Source)
2010-05-10 12:33:10,234 WARN [main] Native Directory is not reachable. Attempting to re-connect... com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
2010-05-10 12:33:10,234 WARN [main] Number Format Exception converting nullto int; Returning default value 10[Root Cause: null ] com.hyperion.css.common.CSSUtils.toInt(Unknown Source)
2010-05-10 12:33:10,234 WARN [main] Number Format Exception converting nullto int; Returning default value 3[Root Cause: null ] com.hyperion.css.common.CSSUtils.toInt(Unknown Source)
2010-05-10 12:33:12,265 ERROR [main] 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
2010-05-10 12:33:13,250 ERROR [main] 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
2010-05-10 12:33:13,250 WARN [main] Failed to instantiate provider for factory: com.hyperion.css.spi.impl.nv.NativeFactory.[Root Cause: 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089. ] com.hyperion.css.spi.CSSManager.getProvider(Unknown Source)
2010-05-10 12:33:13,250 WARN [main] Native Directory is not reachable. Will try to re-connect after 3 seconds... com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
2010-05-10 12:33:16,359 WARN [main] Attempting to connect to Native Directory: Retry Count: 1 com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
2010-05-10 12:33:18,375 ERROR [main] 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
2010-05-10 12:33:19,390 ERROR [main] 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
2010-05-10 12:33:19,390 WARN [main] Failed to instantiate provider for factory: com.hyperion.css.spi.impl.nv.NativeFactory.[Root Cause: 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089. ] com.hyperion.css.spi.CSSManager.getProvider(Unknown Source)
2010-05-10 12:33:19,390 WARN [main] Native Directory is not reachable. Will try to re-connect after 3 seconds... com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
2010-05-10 12:33:22,390 WARN [main] Attempting to connect to Native Directory: Retry Count: 2 com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
2010-05-10 12:33:24,437 ERROR [main] 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
2010-05-10 12:33:25,421 ERROR [main] 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
2010-05-10 12:33:25,421 WARN [main] Failed to instantiate provider for factory: com.hyperion.css.spi.impl.nv.NativeFactory.[Root Cause: 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089. ] com.hyperion.css.spi.CSSManager.getProvider(Unknown Source)
2010-05-10 12:33:25,421 WARN [main] Native Directory is not reachable. Will try to re-connect after 3 seconds... com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
2010-05-10 12:33:28,421 WARN [main] Attempting to connect to Native Directory: Retry Count: 3 com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
2010-05-10 12:33:30,453 ERROR [main] 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
2010-05-10 12:33:31,453 ERROR [main] 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
2010-05-10 12:33:31,453 WARN [main] Failed to instantiate provider for factory: com.hyperion.css.spi.impl.nv.NativeFactory.[Root Cause: 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089. ] com.hyperion.css.spi.CSSManager.getProvider(Unknown Source)
2010-05-10 12:33:31,453 WARN [main] Native Directory is not reachable. Will try to re-connect after 3 seconds... com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
2010-05-10 12:33:34,453 WARN [main] Attempting to connect to Native Directory: Retry Count: 4 com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
2010-05-10 12:33:36,390 ERROR [main] 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
2010-05-10 12:33:37,390 ERROR [main] 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
2010-05-10 12:33:37,390 WARN [main] Failed to instantiate provider for factory: com.hyperion.css.spi.impl.nv.NativeFactory.[Root Cause: 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089. ] com.hyperion.css.spi.CSSManager.getProvider(Unknown Source)
2010-05-10 12:33:37,390 WARN [main] Native Directory is not reachable. Will try to re-connect after 3 seconds... com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
2010-05-10 12:33:40,390 WARN [main] Attempting to connect to Native Directory: Retry Count: 5 com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
2010-05-10 12:33:42,328 ERROR [main] 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
2010-05-10 12:33:43,328 ERROR [main] 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
2010-05-10 12:33:43,328 WARN [main] Failed to instantiate provider for factory: com.hyperion.css.spi.impl.nv.NativeFactory.[Root Cause: 27:1112:Failed to connect to D26085.arrownao.corp.arrow.com at 28089. ] com.hyperion.css.spi.CSSManager.getProvider(Unknown Source)
2010-05-10 12:33:43,328 WARN [main] Native Directory is not reachable. Will try to re-connect after 3 seconds... com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
2010-05-10 12:33:46,328 WARN [main] Attempting to connect to Native Directory: Retry Count: 6 com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)Hi
I am to login to Hyperion Shared Services console. Share service for Essbase is running properly. When I attempt login into Essbase Studio Login, following error message appears
Network communication with the server failed
Connection refused: connect
=========================================================================
Also,the below Error messages are found in Oracle EPM System Diagnostic Reports
Validation tool info: 11.1.1.3.0 drop 9-0 build 3129 on 07/16/2009 01:24 PM
OS name: Windows XP
OS version: 5.1
Essbase Server startup check using Maxl command
Error: Result: Unable to connect Essbase Server using MAXL command. Please check that essbase server is running.
Recommended Action: Check Essbase Server is started.
EssabaseServerChecker
Error: Cannot connect to olap service. Cannot connect to Essbase Server. Error:Essbase Error(1051293): Login fails due to invalid login credentials
Recommended Action: Check application is started.
SVR: Essbase Java API
Launch external checker with next command: C:\Hyperion\common\validation\9.5.0.0\launchEssbaseJavaAPI.bat EssbaseJAPIConnect admin ****** d26085.arrownao.corp.arrow.com http://d26085.arrownao.corp.arrow.com:13080/aps/JAPI
Error: Result: -1; Error message: Cannot connect to olap service. Cannot connect to Essbase Server at d26085.arrownao.corp.arrow.com. Timed out waiting to connect to the Essbase Agent/Server using TCP/IP. Check your network connections.
Recommended Action: Make sure external checker is working.
ESS: Essbase Studio Server
Connecting to Essbase Studio Server...
Error: Network communication with the server failed
Recommended Action: Check application is started.
SVR: Essbase Java API
Launch external checker with next command: C:\Hyperion\common\validation\9.5.0.0\launchEssbaseJavaAPI.bat EssbaseJAPIConnect admin ****** d26085.arrownao.corp.arrow.com http://d26085.arrownao.corp.arrow.com:13080/aps/JAPI
Error: Result: -1; Error message: Cannot connect to olap service. Cannot connect to Essbase Server at d26085.arrownao.corp.arrow.com. Timed out waiting to connect to the Essbase Agent/Server using TCP/IP. Check your network connections.
Recommended Action: Make sure external checker is working.
Please advice how to slove this Essbase issue. -
Unable to connect to essbase server
Hi all,
In one of my DEV environment(Hyperion 9.3.1 64-bit)..I'm unable to connect to essbase server(EPMTSG96:1478) and throws out below error
Error: 1051293: Login fails due to invalid login credentials
I'm not even able to perform start/stop of essbase server.
On the shared services end,i get below error message when tried to select my essbase server project(Analytic Servers: EPMTSG96:2),tied with essbase server EPMTSG96:1478
Login fails due to invalid login credentials
I'm able to connect to admin console using my "admin" id and not able to connect to my essbase server using "epmpadm",which is the user name set for essbase server EPMTSG96:1478.
Here goes the action i performed:
1) Created new shared services project as "Analytic Servers : EPMTSG96:3"
2) Added the application "Analytic servers :EPMTSG96:2" to the project,due to which this application already under project "Analytic Servers: EPMTSG96:2" got removed.
3) So now my project structure is like this:
Analytic Servers : EPMTSG96:3
+ Analytic Servers: EPMTSG96:2
4) Now tried to externalise the users from essbase server EPMTSG96:1478 and from then i got all these failure messages.
Kindly advice!..Any help is appreciable.Thanks!
RevIn one of my DEV environment(Hyperion 9.3.1 64-bit)..I'm unable to connect to essbase server(EPMTSG96:1478) and throws out below error
Error: 1051293: Login fails due to invalid login credentials
I don't know about Shared service how it works...Reset your password and try to login after 5 mins.. -
Unable to Login into APEX after upgrade from ORACLE XE to APEX 3.2
Hi,
I have upgraded Oracle 10g XE to with apex_3.2 on the Windows XP.
My ORACLE XE wa in folder "C:\ORACLE XE"
And APEX 3.2 in folder "C:\Ver 3.2\APEX"
Once you complete the standard install, i performd the following steps to complete
the upgrade which i got on my previous post.
Till normal installation i was able to login in Apex link and was able to run my application which was
in oracle XE but the only problem was i was unable to see any images in "EDIT PAGE" but my application was running well.
then i did following steps to get those images
Connect to SQL*Plus as SYS
@APEX_HOME/apex/apxldimg.sql APEX_HOME
@APEX_HOME/apex/apxxepwd.sql password
(where password is the password of the Application Express internal ADMIN account)
I chanbged image directory as below
FROM:
create directory APEX_IMAGES as ‘&1/apex/images’ ;
TO:
create directory APEX_IMAGES as ‘c:\oraclexe\apex\images’ and also tried ‘c:\ver 3.2\apex\images’;
Ran @apxldimg.sql
@apxxepwd.sql password (where password is the password of the Application Express internal ADMIN account)
Exit from the SQL*Plus session.
Change directory to c:\oraclexe\apex\owa, open the README.TXT file and follow the instructions within to complete the installation
But now i am unable to login into the page itself. It "showing Page Not Found"
Please kindly help me how to run APEX now through link.
Thanks in advance.
Thanks & Regards
Sanjay
Edited by: user11204334 on Aug 11, 2009 2:05 AM
Edited by: user11204334 on Aug 11, 2009 4:30 AMHi John,
Thanks for reply
I got error while doing following steps in few procedures
Change directory to c:\oraclexe\apex\owa, open the README.TXT file and follow the instructions within to complete the installation
Before doing the above step i was able to login into my application but without images
Can you please help that how to check those errors and any particular procedure you know which is responsible for the Login problem.
Thanks a Lot for help John
Thanks & Regards
Sanjay -
HTTP 403 when login into SSO-Server
Hello, all!
I have RHEL 3.0 and OAS 9.0.4. and Domain (Win2003).
I have configured the synchronization between Oracle Internet Directory and Microsoft Active Directory (AD). The Oracle SSO server configured to enable Microsoft Internet Explorer users to automatically authenticate to their web applications using their desktop credentials. So I use Windows Native Authentication.
About my problem:
In some computers when user try to login into SSO-Server (as sample, press button 'Login' in page http://host:port/oiddas) he gets error 'HTTP 403'. But this user can sit into other computer and login into Windows with him domain account and can login into SSO without any problem!
In some situation the windows user profile re-creating helps to get out this error.
But sometime only re-installation of Windows can help to resolve this problem.
Maybe anybody faced same challenge... and have a solution....
Help me, please!
Best regards,
Natalia.Installed tamper data and from what I can tell, the requests go back and forth between AM server and protected resource. Here's the Request Graph output.
http://iamsys06.iamtest.com:8080/ 302 103
http://iamsys05.iamtest.com:9080/.../Login?goto=http%3A%2... 302 16
http://iamsys05:9080/.../Login?goto=http%3A%2F%2Fiams... 200 16
http://iamsys05:9080/favicon.ico 404 50
http://iamsys05:9080/.../Login?AMAuthCookie=AQIC5wM2LY4Sfcz... 302 183
http://iamsys06.iamtest.com:8080/ 302 30
http://iamsys05.iamtest.com:9080/.../Login?goto=http%3A%2... 302 17
http://iamsys05:9080/.../Login?goto=http%3A%2F%2Fiams... 302 10711
http://iamsys06.iamtest.com:8080/ 302 23
http://iamsys05.iamtest.com:9080/.../Login?goto=http%3A%2... 302 15
http://iamsys05:9080/.../Login?goto=http%3A%2F%2Fiams... 302 16
http://iamsys06.iamtest.com:8080/ 302 18
http://iamsys05.iamtest.com:9080/.../Login?goto=http%3A%2... 302 17
http://iamsys05:9080/.../Login?goto=http%3A%2F%2Fiams... 302 13
http://iamsys06.iamtest.com:8080/ 302 13
http://iamsys05.iamtest.com:9080/.../Login?goto=http%3A%2... 302 10
http://iamsys05:9080/.../Login?goto=http%3A%2F%2Fiams... 302 10
http://iamsys06.iamtest.com:8080/ 302 16
http://iamsys05.iamtest.com:9080/.../Login?goto=http%3A%2... 302 11
http://iamsys05:9080/.../Login?goto=http%3A%2F%2Fiams... 302 12
http://iamsys06.iamtest.com:8080/ 302 12
http://iamsys05.iamtest.com:9080/.../Login?goto=http%3A%2... 302 10
http://iamsys05:9080/.../Login?goto=http%3A%2F%2Fiams... 302 12
http://iamsys06.iamtest.com:8080/ 302 12
http://iamsys05.iamtest.com:9080/.../Login?goto=http%3A%2... 302 10
| | | | |
URI Status Duration 20:59:52.542 20:59:56.512 21:00:00.482 21:00:04.451 21:00:08.421 -
SOLVED - Unable to login into xfce after upgrade
I upgraded my Arch computer. When rebooting I get SLIM and can enter my login/password but can go any further as it loops back to SLIM. I've read another post on consolekit & HAL.
I have consolekit 0.4.1-2 and HAL 0.5.14-1. SLIM gets started via /etc/inittab
id:5:initdefault:
x:5:respawn:/usr/bin/slim >& /dev/null
And my .xinitrc looks like:
#!bin/sh
exec ck-launch-session startxfce4
It has been working for months this way. Too bad to be stuck today.
Any hint on how I can debug this issue?
Thanks
Alphazo
---> ANSWER IS HERE:
http://bbs.archlinux.org/viewtopic.php?id=86747
Just had to
sudo rm ~/.ICEauthority
and rebooted.
COOL... That didn't even give me enough time to get nervous.
EDIT
I killed SLIM and tried to launch 'startx'. I don't know how to copy/paste from the command line but what I see is :
(EE) Failed to load module "fbdev" (module does not exist, 0)
xf86TokenToOptInfo: table is NULL
(EE) config/hal: couldn't find input devices: org.freedesktop.DBus.Error.AccessDenied (Rejected send message, 1 matched rules; type="method_call", sender.........
<stdin>3: error: Unknown #directive "Xft"
EDIT2
Here is a copy of the log files after rebooting:
/var/log/slim.log
/usr/bin/xauth: creating new authority file /var/run/slim.auth
slim: waiting for X server to begin accepting connections
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.7.3.901 (1.7.4 RC 1)
Release Date: 2009-12-11
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-ARCH i686
Current Operating System: Linux ARCH-DN 2.6.31-ARCH #1 SMP PREEMPT Tue Nov 10 19:48:17 CET 2009 i686
Kernel command line: root=/dev/disk/by-uuid/046d7122-21a4-47df-8f19-3fb5ebec9192 ro vga=773
Build Date: 12 December 2009 12:59:40PM
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 24 19:46:20 2009
(==) Using default built-in configuration (30 lines)
.(EE) Failed to load module "fbdev" (module does not exist, 0)
xf86TokenToOptinfo: table is NULL
xf86TokenToOptinfo: table is NULL
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Multiple doodads named ""
> Using first definition
> Warning: Multiple doodads named ""
> Using first definition
> Warning: Multiple doodads named ""
> Using first definition
> Warning: Multiple doodads named ""
> Using first definition
> Warning: Multiple doodads named ""
> Using first definition
> Warning: Multiple doodads named ""
> Using first definition
Errors from xkbcomp are not fatal to the X server
/usr/bin/xauth: creating new authority file /home/dnativel/.Xauthority
/usr/bin/startxfce4: X server already running on display :0.0
<stdin>:1: error: Unknown #directive "Those"
# Those are fallback settings, use the ui plugin to change it
<stdin>:2: error: Unknown #directive "or"
# or add your overrides to ~/.Xresources
<stdin>:3: error: Unknown #directive "Xft"
# Xft.hintstyle: hintnone/hintslight/hintmedium/hintfull
<stdin>:4: error: Unknown #directive "Xft"
# Xft hinting: 1/0
4 errors in preprocessor.
xrdb: "Xft.hinting" on line 9 overrides entry on line 6
xrdb: "Xft.hintstyle" on line 11 overrides entry on line 7
Agent pid 3015
xfce4-session: Unable to access file /home/dnativel/.ICEauthority: Permission non accordée
Agent pid 3015 killed
slim: waiting for X server to shut down.
/usr/bin/xauth: creating new authority file /var/run/slim.auth
slim: waiting for X server to begin accepting connections
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.7.3.901 (1.7.4 RC 1)
Release Date: 2009-12-11
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-ARCH i686
Current Operating System: Linux ARCH-DN 2.6.31-ARCH #1 SMP PREEMPT Tue Nov 10 19:48:17 CET 2009 i686
Kernel command line: root=/dev/disk/by-uuid/046d7122-21a4-47df-8f19-3fb5ebec9192 ro vga=773
Build Date: 12 December 2009 12:59:40PM
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 24 19:46:56 2009
(==) Using default built-in configuration (30 lines)
(EE) Failed to load module "fbdev" (module does not exist, 0)
xf86TokenToOptinfo: table is NULL
xf86TokenToOptinfo: table is NULL
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Multiple doodads named ""
> Using first definition
> Warning: Multiple doodads named ""
> Using first definition
> Warning: Multiple doodads named ""
> Using first definition
> Warning: Multiple doodads named ""
> Using first definition
> Warning: Multiple doodads named ""
> Using first definition
> Warning: Multiple doodads named ""
> Using first definition
Errors from xkbcomp are not fatal to the X server
/var/log/Xorg.0.log
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.7.3.901 (1.7.4 RC 1)
Release Date: 2009-12-11
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-ARCH i686
Current Operating System: Linux ARCH-DN 2.6.31-ARCH #1 SMP PREEMPT Tue Nov 10 19:48:17 CET 2009 i686
Kernel command line: root=/dev/disk/by-uuid/046d7122-21a4-47df-8f19-3fb5ebec9192 ro vga=773
Build Date: 12 December 2009 12:59:40PM
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 24 19:46:56 2009
(II) Loader magic: 0x81e4c60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7
(--) PCI:*(0:0:2:0) 8086:27a2:1028:0201 Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xeff00000/524288, 0xd0000000/268435456, 0xefec0000/262144, I/O @ 0x0000eff8/8
(--) PCI: (0:0:2:1) 8086:27a6:1028:0201 Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xeff80000/524288
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
Section "Device"
Identifier "Builtin Default intel Device 0"
Driver "intel"
EndSection
Section "Screen"
Identifier "Builtin Default intel Screen 0"
Device "Builtin Default intel Device 0"
EndSection
Section "Device"
Identifier "Builtin Default vesa Device 0"
Driver "vesa"
EndSection
Section "Screen"
Identifier "Builtin Default vesa Screen 0"
Device "Builtin Default vesa Device 0"
EndSection
Section "Device"
Identifier "Builtin Default fbdev Device 0"
Driver "fbdev"
EndSection
Section "Screen"
Identifier "Builtin Default fbdev Screen 0"
Device "Builtin Default fbdev Device 0"
EndSection
Section "ServerLayout"
Identifier "Builtin Default Layout"
Screen "Builtin Default intel Screen 0"
Screen "Builtin Default vesa Screen 0"
Screen "Builtin Default fbdev Screen 0"
EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default intel Screen 0" (0)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default intel Device 0"
(==) No monitor specified for screen "Builtin Default intel Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (1)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (2)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AutoAddDevices.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.3.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.3.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.3.901, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 2.9.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.7.0.901, module version = 2.2.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 00@00:02:0
(WW) Falling back to old probe method for vesa
(WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.7.3.901, module version = 0.1.0
ABI class: X.Org Video Driver, version 6.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) intel(0): Creating default Display subsection in Screen section
"Builtin Default intel Screen 0" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
(--) intel(0): Chipset: "945GM"
(--) intel(0): Linear framebuffer at 0xD0000000
(--) intel(0): IO registers at addr 0xEFF00000 size 524288
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(II) intel(0): the SDVO device with slave addr 70 is found on DVO 1 port
(II) intel(0): 2 display pipes available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA has no monitor section
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "LCD", prod id 14086
xf86TokenToOptinfo: table is NULL
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
(II) intel(0): I2C bus "SDVOB DDC Bus" initialized.
(II) intel(0): Output TMDS-1 has no monitor section
(II) intel(0): SDVOB: device VID/DID: 04:AA.03, clock range 25.0MHz - 165.0MHz
(II) intel(0): SDVOB: 1 input channel
(II) intel(0): SDVOB: TMDS0 output reported
xf86TokenToOptinfo: table is NULL
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
(II) intel(0): No SDVO device found on SDVOC
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(0): Output TV has no monitor section
(II) intel(0): Current clock rate multiplier: 1
(II) intel(0): EDID vendor "LCD", prod id 14086
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Output TMDS-1 disconnected
(II) intel(0): Output TV disconnected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS using initial mode 1280x800
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(II) intel(0): detected 256 kB GTT.
(II) intel(0): detected 7932 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.3.901, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x61110 (PORT_HOTPLUG_EN) changed from 0x00000000 to 0x00000020
(WW) intel(0): Register 0x61114 (PORT_HOTPLUG_STAT) changed from 0x00000000 to 0x00000400
(WW) intel(0): Register 0x70024 (PIPEASTAT) changed from 0x00000000 to 0x00000203
(WW) intel(0): PIPEASTAT before: status:
(WW) intel(0): PIPEASTAT after: status: VSYNC_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS
(WW) intel(0): Register 0x71024 (PIPEBSTAT) changed from 0x00000202 to 0x80000202
(WW) intel(0): PIPEBSTAT before: status: VSYNC_INT_STATUS VBLANK_INT_STATUS
(WW) intel(0): PIPEBSTAT after: status: FIFO_UNDERRUN VSYNC_INT_STATUS VBLANK_INT_STATUS
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
(==) Depth 24 pixmap format is 32 bpp
(II) intel(0): Kernel reported 488960 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 1955836 kB available
(II) intel(0): [DRI2] Setup complete
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) UXA(0): Driver registered support for the following operations:
(II) solid
(II) copy
(II) composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): Current clock rate multiplier: 1
(II) intel(0): adjusting plane->pipe mappings to allow for framebuffer compression
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x005fffff: compressed frame buffer (6144 kB, 0x000000007f800000 physical
(II) intel(0): 0x00600000-0x00600fff: compressed ll buffer (4 kB, 0x000000007fe00000 physical
(II) intel(0): 0x00601000-0x0060afff: HW cursors (40 kB, 0x000000007fe01000 physical
(II) intel(0): 0x0060b000-0x0060bfff: overlay registers (4 kB, 0x000000007fe0b000 physical
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0f9f3fff: DRI memory manager (248020 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB) X tiled
(II) intel(0): 0x0f9f4000: end of memory manager
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane B is now disabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane A is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): Output TMDS-1 is connected to pipe none
(II) intel(0): Output TV is connected to pipe none
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(==) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: DRI2 Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 338 x 211
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "fr"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device AlpsPS/2 ALPS DualPoint TouchPad
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 1.2.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(II) Synaptics touchpad driver version 1.2.1
(**) Option "Device" "/dev/input/event8"
(II) AlpsPS/2 ALPS DualPoint TouchPad: x-axis range 0 - 1023
(II) AlpsPS/2 ALPS DualPoint TouchPad: y-axis range 0 - 767
(II) AlpsPS/2 ALPS DualPoint TouchPad: pressure range 0 - 127
(II) AlpsPS/2 ALPS DualPoint TouchPad: finger width range 0 - 0
(II) AlpsPS/2 ALPS DualPoint TouchPad: buttons: left right middle
(**) Option "TapButton1" "1"
(**) Option "TapButton2" "2"
(**) Option "TapButton3" "3"
(--) AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
(**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
(II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint TouchPad" (type: TOUCHPAD)
(**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) keeping acceleration scheme 1
(**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration profile 0
(--) AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
(II) config/hal: Adding input device DualPoint Stick
(**) DualPoint Stick: always reports core events
(**) DualPoint Stick: Device: "/dev/input/event7"
(II) DualPoint Stick: Found 3 mouse buttons
(II) DualPoint Stick: Found relative axes
(II) DualPoint Stick: Found x and y relative axes
(II) DualPoint Stick: Configuring as mouse
(**) DualPoint Stick: YAxisMapping: buttons 4 and 5
(**) DualPoint Stick: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "DualPoint Stick" (type: MOUSE)
(**) DualPoint Stick: (accel) keeping acceleration scheme 1
(**) DualPoint Stick: (accel) acceleration profile 0
(II) DualPoint Stick: initialized for relative axes.
(II) config/hal: Adding input device Sleep Button
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event4"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "fr"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "fr"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event6"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "fr"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event5"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "fr"
(II) AIGLX: Suspending AIGLX clients for VT switch
Last edited by alphazo (2009-12-25 00:04:20)Hi John,
Thanks for reply
I got error while doing following steps in few procedures
Change directory to c:\oraclexe\apex\owa, open the README.TXT file and follow the instructions within to complete the installation
Before doing the above step i was able to login into my application but without images
Can you please help that how to check those errors and any particular procedure you know which is responsible for the Login problem.
Thanks a Lot for help John
Thanks & Regards
Sanjay -
Unable to login to Directory Server: SaveChangeException
I saw an earlier posting that reported a similar problem but there was no answer to the question so I will post the question again.
I have just installed Oracle Directory Server but I am unable to login with the default username/password. I can connect if I leave the User and Password fields empty but when I specify orcladmin/welcome I get the error below. Does anyone know what the problem could be and how I can fix it?
Bind of request to LDAP Server failed.
oracle.ldap.admin.common.SaveChangeException: Bind of request to LDAP Server failed.
at oracle.ldap.admin.Root.saveChanges(Root.java:815)
at oracle.ldap.admin.common.AdminPropView.saveChanges(AdminPropView.java:710)
at oracle.ldap.admin.client.propEditors.TabView.commit(TabView.java:538)
at oracle.ldap.admin.client.AdminUtil$logonCmds.run(AdminUtil.java:727)
at java.lang.Thread.run(Thread.java)I figured it out. For anyone else searching for this problem: the issue was that OID was not started. All I needed to do was start it (oidctl .... start) and it seems to be ok now. In any case, I feel a little silly for not starting things up properly but in my defense the error message did not help at all.
-
Unable to connect to essbase server through console
Getting the rror below
Error: 1042006: Network error [10061]: Unable to connect to [localhost:1423].
The client timed out waiting to connect to Analytic Services Agent using TCP/IP.
Check your network connections.
Also make sure that server and port values are correct
I am able to connect and work through esscmd, though.
Thanks
BiswajitHi,
This is one of known issues. Firstly, ensure that agent and required services are up and running properly. As you said, you were able to connect through MAXL/ESSCMD , it means essbase server( analytical services must be up and running).
Next, check whether your admininstration services server is running.
If all s well, try NETDELAY and NETRETRYCOUNT .One can find informatino regarding this in tech reference
http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/html_esb_techref/techref.htm
Hope it helps
Sandeep Reddy Enti
HCC
http://hyperionconsultancy.com -
Howto disable direct login into DB server
Hello Experts,
I have a very old system with me(SAP 4.0B running on AIX/Oracle DB) which has 7 application servers, however there is too much load on all servers.
I wish to restrict users logging directly onto the DB server.
Is there a way to disable users login into DB servers, I know about SAP logon groups, however a user would still be able to bypass it by configuring direct connection in the saplogon.
There could be a parameter perhaps that I don't recollect right now !
Any help is appreciated.
Regards,
SiddheshHi Ermanno,
I was aware of this solution, but didn't have detailed knowledge about it , cause I am primarily a Basis guy.
I have assigned some points to you currently, I will check with my ABAPers and let you know.
Meanwhile I'll keep the question open, just in case if someone has some parameter or some other easier option available..
Thanks again.
Regards,
Siddhesh -
Unable to download Oracle Essbase Server Release 11.1.1.4.0
Hello,
I am trying to download the file below (second from the top) and it is resulting in a broken link. I have tried multiple browsers and different times. This is for a customer who is extremely infuriated. Please help. They need to download Essbase Server 11.1.1.4
http://www.oracle.com/technetwork/middleware/bi-foundation/downloads/essbase-11114-488321.html
Oracle Essbase Server Release 11.1.1.4.0
- for Windows (x86, x64, Itanium), Linux (x86, x86-64), HPUX (PA-Risc 64-bit, Itanium), AIX PowerPC (64-bit), and Solaris SPARC (64-bit)
File1Essbase Server 11.1.1.4.0 is no longer available for download from OTN. Current releases are linked here:
http://www.oracle.com/technetwork/middleware/essbase/downloads/index.html -
Keychain Invalid and unable to login to secure server
Hi - I am unable to log into secure servers (eg, gmail) and i am getting an "invalid keychain" message when trying to purchase music from the itunes store. I couldn't log into the support page either and had to use another machine. This just started happening perhaps after a s/w update? I ran keychain firstaid, but my keychains seem to be in good order. Any suggestions would be great.
HadiHi Hadi, and a warm welcome to the forums!
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot.
The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates. -
Unable to Login into BI Portal
Hello SAP Experts!
We have installed BI 7.0. During installation we have selected EP and EPcore components also. Now when i am trying to login into the portal with Url : http://<IP_Address>:5000/irj/portal, i am getting,
Java iView Runtime. Please, can anyone throw some light on this issue.
Thanks a lot
Regards
VanithaHello Van,
Do provide more details on this by providing the trace of this particular error. Look into:
C:\usr\sap\<SID>\JC00\j2ee\cluster\server0\log for example... and open the default trace file (latest) and check the latest entry..
Right off the bat, since it's a new installation - portal performance issue would have to be considered as a possible cause.
Regards,
Jan -
I am unable to log into the server wiki. I can get as far as the login page.
When I attempte to log into our company server wiki I can get as far as the login page.
When I type in any user/pass all I see is a spinning wheel on the login panel.
The error that is occuring in the back ground is as follows
ActiveRecord::StatementInvalid in LoginController#plain_login
SQLite3::SQLException: attempt to write a readonly database: INSERT INTO "users" ("uid", "created_at", "shortname", "longname", "generated_uid", "updated_at") VALUES (...)
I have confirmed that the postgres server for collab is running and I am able to connect to it through a Database Utility. I can also verify through this database utility that the Wiki is in tact. I do not know where else to go form here or if the errors I am seeing are not related to the wiki.
I am open to any possible assistance through this endeavor. I am running a Mac OS X server version 10.7.5.Thank you so much. I deleted all of the Netflix history and the cookie. and it works fine now. Thank you again.
-
Not able to login into presentations server
Hi,
I have installed OBIEE in my local machine. As a part of report creation I have created an rpd file and changed the NQSConfig.ini file as mentioned in
http://www.oracle.com/technology/obe/obe_bi/bi_ee_1013/bi_admin/biadmin.html.
Then I have re-started the OC4J server and all the OBIEE services. Then I open the Presentation Services, I am not able to log in. The error shown is
Error Codes: WH4KCFW6:OPR4ONWY:U9IM8TAC
Odbc driver returned an error (SQLDriverConnectW).
+State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 12008] Unable to connect to port 9703 on machine . [nQSError: 12010] Communication error connecting to remote end point: address = ; port = 9703. [nQSError: 12002] Socket communication error at call=: (Number=-1) Unknown (HY000)+
I have checked the Log file (NQServer.log file in /OracleBI/Server/log folder). The Entries in the Log file are like this
2009-10-27 18:00:42
[36007] Loading repository C:\OBIEE\OracleBI\server\Repository\EventHub.rpd.
2009-10-27 18:00:42
[14055] Loading subject area: EventHub ...
2009-10-27 18:00:42
[14056] Finished loading subject area: EventHub.
2009-10-27 18:00:42
[43030] : Oracle BI Server started. Version: 10.1.3.4.1.090414.1900.
2009-10-29 14:09:42
[nQSError: 12002] Socket communication error at call=send: (Number=10038) An operation was attempted on something that is not a socket.
2009-10-29 14:29:23
[43031] : Oracle BI Server shutdown.
2009-10-29 14:29:26
[14058] Unloaded all subject areas.
2009-10-29 15:01:55
[36007] Loading repository C:\OBIEE\OracleBI\server\Repository\EventHub.rpd.
2009-10-29 15:01:55
[14055] Loading subject area: EventHub ...
2009-10-29 15:01:55
[14056] Finished loading subject area: EventHub.
2009-10-29 15:01:55
[43030] : Oracle BI Server started. Version: 10.1.3.4.1.090414.1900.
I have already gone through the forums which are already logged reporting the same error. But I dint get any pointers to the solution.
Please let me know what might have gone wrong and how I can login to the Presentation Server and continue with report creation. Please let me know if you need further information on this .
Thanks in advance for your time,
Raj KumarHi,
The following is the NQSConfig.ini file.
# NQSConfig.INI
# Copyright (c) 1997-2006 Oracle Corporation, All rights reserved
# INI file parser rules are:
# If values are in literals, digits or _, they can be
# given as such. If values contain characters other than
# literals, digits or _, values must be given in quotes.
# Repository Section
# Repositories are defined as logical repository name - file name
# pairs. ODBC drivers use logical repository name defined in this
# section.
# All repositories must reside in OracleBI\server\Repository
# directory, where OracleBI is the directory in which the Oracle BI
# Server software is installed.
[ REPOSITORY ]
Star = EventHub.rpd, DEFAULT;
# Query Result Cache Section
[ CACHE ]
ENABLE = NO;
// A comma separated list of <directory maxSize> pair(s)
// e.g. DATA_STORAGE_PATHS = "d:\OracleBIData\nQSCache" 500 MB;
DATA_STORAGE_PATHS = "C:\OBIEE\OracleBIData\cache" 500 MB;
MAX_ROWS_PER_CACHE_ENTRY = 100000; // 0 is unlimited size
MAX_CACHE_ENTRY_SIZE = 1 MB;
MAX_CACHE_ENTRIES = 1000;
POPULATE_AGGREGATE_ROLLUP_HITS = NO;
USE_ADVANCED_HIT_DETECTION = NO;
MAX_SUBEXPR_SEARCH_DEPTH = 7;
// Cluster-aware cache
// GLOBAL_CACHE_STORAGE_PATH = "<directory name>" SIZE;
// MAX_GLOBAL_CACHE_ENTRIES = 1000;
// CACHE_POLL_SECONDS = 300;
// CLUSTER_AWARE_CACHE_LOGGING = NO;
# General Section
# Contains general server default parameters, including localization
# and internationalization, temporary space and memory allocation,
# and other default parameters used to determine how data is returned
# from the server to a client.
[ GENERAL ]
// Localization/Internationalization parameters.
LOCALE = "English-usa";
SORT_ORDER_LOCALE = "English-usa";
SORT_TYPE = "binary";
// Case sensitivity should be set to match the remote
// target database.
CASE_SENSITIVE_CHARACTER_COMPARISON = OFF ;
// SQLServer65 sorts nulls first, whereas Oracle sorts
// nulls last. This ini file property should conform to
// that of the remote target database, if there is a
// single remote database. Otherwise, choose the order
// that matches the predominant database (i.e. on the
// basis of data volume, frequency of access, sort
// performance, network bandwidth).
NULL_VALUES_SORT_FIRST = OFF;
DATE_TIME_DISPLAY_FORMAT = "yyyy/mm/dd hh:mi:ss" ;
DATE_DISPLAY_FORMAT = "yyyy/mm/dd" ;
TIME_DISPLAY_FORMAT = "hh:mi:ss" ;
// Temporary space, memory, and resource allocation
// parameters.
// You may use KB, MB for memory size.
WORK_DIRECTORY_PATHS = "C:\OBIEE\OracleBIData\tmp";
SORT_MEMORY_SIZE = 4 MB ;
SORT_BUFFER_INCREMENT_SIZE = 256 KB ;
VIRTUAL_TABLE_PAGE_SIZE = 128 KB ;
// Analytics Server will return all month and day names as three
// letter abbreviations (e.g., "Jan", "Feb", "Sat", "Sun").
// To use complete names, set the following values to YES.
USE_LONG_MONTH_NAMES = NO;
USE_LONG_DAY_NAMES = NO;
UPPERCASE_USERNAME_FOR_INITBLOCK = NO ; // default is no
// Aggregate Persistence defaults
// The prefix must be between 1 and 8 characters long
// and should not have any special characters ('_' is allowed).
AGGREGATE_PREFIX = "SA_" ;
# Security Section
# Legal value for DEFAULT_PRIVILEGES are:
# NONE READ
[ SECURITY ]
DEFAULT_PRIVILEGES = READ;
PROJECT_INACCESSIBLE_COLUMN_AS_NULL = NO;
MINIMUM_PASSWORD_LENGTH = 0;
#IGNORE_LDAP_PWD_EXPIRY_WARNING = NO; // default is no.
#SSL=NO;
#SSL_CERTIFICATE_FILE="servercert.pem";
#SSL_PRIVATE_KEY_FILE="serverkey.pem";
#SSL_PK_PASSPHRASE_FILE="serverpwd.txt";
#SSL_PK_PASSPHRASE_PROGRAM="sitepwd.exe";
#SSL_VERIFY_PEER=NO;
#SSL_CA_CERTIFICATE_DIR="CACertDIR";
#SSL_CA_CERTIFICATE_FILE="CACertFile";
#SSL_TRUSTED_PEER_DNS="";
#SSL_CERT_VERIFICATION_DEPTH=9;
#SSL_CIPHER_LIST="";
# There are 3 types of authentication. The default is NQS
# You can select only one of them
#----- 1 -----
#AUTHENTICATION_TYPE = NQS; // optional and default
#----- 2 -----
#AUTHENTICATION_TYPE = DATABASE;
# [ DATABASE ]
# DATABASE = "some_data_base";
#----- 3 -----
#AUTHENTICATION_TYPE = BYPASS_NQS;
# Server Section
[ SERVER ]
SERVER_NAME = Oracle_BI_Server ;
READ_ONLY_MODE = NO; // default is "NO". That is, repositories can be edited online.
MAX_SESSION_LIMIT = 2000 ;
MAX_REQUEST_PER_SESSION_LIMIT = 500 ;
SERVER_THREAD_RANGE = 40-100;
SERVER_THREAD_STACK_SIZE = 0; // default is 256 KB, 0 for default
DB_GATEWAY_THREAD_RANGE = 40-200;
DB_GATEWAY_THREAD_STACK_SIZE = 0; // default is 256 KB, 0 for default
MAX_EXPANDED_SUBQUERY_PREDICATES = 8192; // default is 8192
MAX_QUERY_PLAN_CACHE_ENTRIES = 1024; // default is 1024
MAX_DRILLDOWN_INFO_CACHE_ENTRIES = 1024; // default is 1024
MAX_DRILLDOWN_QUERY_CACHE_ENTRIES = 1024; // default is 1024
INIT_BLOCK_CACHE_ENTRIES = 20; // default is 20
CLIENT_MGMT_THREADS_MAX = 5; // default is 5
# The port number specified with RPC_SERVICE_OR_PORT will NOT be considered if
# a port number is specified in SERVER_HOSTNAME_OR_IP_ADDRESSES.
RPC_SERVICE_OR_PORT = 9703; // default is 9703
# If port is not specified with a host name or IP in the following option, the port
# number specified at RPC_SERVICE_OR_PORT will be considered.
# When port number is specified, it will override the one specified with
# RPC_SERVICE_OR_PORT.
SERVER_HOSTNAME_OR_IP_ADDRESSES = "ALLNICS"; # Example: "hostname" or "hostname":port
# or "IP1","IP2":port or
# "hostname":port,"IP":port2.
# Note: When this option is active,
# CLUSTER_PARTICIPANT should be set to NO.
ENABLE_DB_HINTS = YES; // default is yes
PREVENT_DIVIDE_BY_ZERO = YES;
CLUSTER_PARTICIPANT = NO; # If this is set to "YES", comment out
# SERVER_HOSTNAME_OR_IP_ADDRESSES. No specific NIC support
# for the cluster participant yet.
// Following required if CLUSTER_PARTICIPANT = YES
#REPOSITORY_PUBLISHING_DIRECTORY = "<dirname>";
#REQUIRE_PUBLISHING_DIRECTORY = YES; // Don't join cluster if directory not accessible
DISCONNECTED = NO;
AUTOMATIC_RESTART = YES;
# Dynamic Library Section
# The dynamic libraries specified in this section
# are categorized by the CLI they support.
[ DB_DYNAMIC_LIBRARY ]
ODBC200 = nqsdbgatewayodbc;
ODBC350 = nqsdbgatewayodbc35;
OCI7 = nqsdbgatewayoci7;
OCI8 = nqsdbgatewayoci8;
OCI8i = nqsdbgatewayoci8i;
OCI10g = nqsdbgatewayoci10g;
DB2CLI = nqsdbgatewaydb2cli;
DB2CLI35 = nqsdbgatewaydb2cli35;
NQSXML = nqsdbgatewayxml;
XMLA = nqsdbgatewayxmla;
ESSBASE = nqsdbgatewayessbasecapi;
# User Log Section
# The user log NQQuery.log is kept in the server\log directory. It logs
# activity about queries when enabled for a user. Entries can be
# viewed using a text editor or the nQLogViewer executable.
[ USER_LOG ]
USER_LOG_FILE_SIZE = 10 MB; // default size
CODE_PAGE = "UTF8"; // ANSI, UTF8, 1252, etc.
# Usage Tracking Section
# Collect usage statistics on each logical query submitted to the
# server.
[ USAGE_TRACKING ]
ENABLE = NO;
//==============================================================================
// Parameters used for writing data to a flat file (i.e. DIRECT_INSERT = NO).
STORAGE_DIRECTORY = "<full directory path>";
CHECKPOINT_INTERVAL_MINUTES = 5;
FILE_ROLLOVER_INTERVAL_MINUTES = 30;
CODE_PAGE = "ANSI"; // ANSI, UTF8, 1252, etc.
//==============================================================================
DIRECT_INSERT = YES;
//==============================================================================
// Parameters used for inserting data into a table (i.e. DIRECT_INSERT = YES).
PHYSICAL_TABLE_NAME = "<Database>"."<Catalog>"."<Schema>"."<Table>" ; // Or "<Database>"."<Schema>"."<Table>" ;
CONNECTION_POOL = "<Database>"."<Connection Pool>" ;
BUFFER_SIZE = 10 MB ;
BUFFER_TIME_LIMIT_SECONDS = 5 ;
NUM_INSERT_THREADS = 5 ;
MAX_INSERTS_PER_TRANSACTION = 1 ;
//==============================================================================
# Query Optimization Flags
[ OPTIMIZATION_FLAGS ]
STRONG_DATETIME_TYPE_CHECKING = ON ;
# CubeViews Section
[ CUBE_VIEWS ]
DISTINCT_COUNT_SUPPORTED = NO ;
STATISTICAL_FUNCTIONS_SUPPORTED = NO ;
USE_SCHEMA_NAME = YES ;
USE_SCHEMA_NAME_FROM_RPD = YES ;
DEFAULT_SCHEMA_NAME = "ORACLE";
CUBE_VIEWS_SCHEMA_NAME = "ORACLE";
LOG_FAILURES = YES ;
LOG_SUCCESS = NO ;
LOG_FILE_NAME = "C:\OBIEE\OracleBI\server\Log\CubeViews.Log";
# MDX Member Name Cache Section
# Cache subsystem for mapping between unique name and caption of
# members for all SAP/BW cubes in the repository.
[ MDX_MEMBER_CACHE ]
// The entry to indicate if the feature is enabled or not, by default it is NO since this only applies to SAP/BW cubes
ENABLE = NO ;
// The path to the location where cache will be persisted, only applied to a single location,
// the number at the end indicates the capacity of the storage. When the feature is enabled,
// administrator needs to replace the "<full directory path>" with a valid path,
// e.g. DATA_STORAGE_PATH = "C:\OracleBI\server\Data\Temp\Cache" 500 MB ;
DATA_STORAGE_PATH = "C:\OBIEE\OracleBIData\cache" 500 MB;
// Maximum disk space allowed for each user;
MAX_SIZE_PER_USER = 100 MB ;
// Maximum number of members in a level will be able to be persisted to disk
MAX_MEMBER_PER_LEVEL = 1000 ;
// Maximum size for each individual cache entry size
MAX_CACHE_SIZE = 100 MB ;
# Oracle Dimension Export Section
[ ORA_DIM_EXPORT ]
USE_SCHEMA_NAME_FROM_RPD = YES ; # NO
DEFAULT_SCHEMA_NAME = "ORACLE";
ORA_DIM_SCHEMA_NAME = "ORACLE";
LOGGING = ON ; # OFF, DEBUG
LOG_FILE_NAME = "C:\OBIEE\OracleBI\server\Log\OraDimExp.Log";
One more thing is that I have kept the BI server (OC4J server) runnung.
Does the time of the error in NQSServer.log match with when you try to login to Presentation Services?
I donot see any error matching the time of loginto presentation services. -
Unable to login to wiki server
I've set up 10.6 (updated to 10.6.1) Server on my old Mini, made it an OD Master, and am trying to get the Wiki to work.
I can login to the /changepassword URL without issue, but when I try the "Log into my page" link at /groups it fails to authenticate.
I found my first problem was that I had WEBDAV-DIGEST disabled in my OD configuration (really? this has to be enabled?), but it still fails to authenticate to the wiki and the ApplePasswordServices.Server.log claims that an invalid password was given (though the same U&P work for /changepassword, AFP, and other services).
Anyone have ideas what the problem might be?
Thanks,
-davehi here the log file.....
when i am trying to open today.. the same error....
2009-08-07 08:01:57
[36007] Loading repository C:\OracleBI\server\Repository\kishore.rpd.
2009-08-07 08:01:57
[14055] Loading subject area: SH ...
2009-08-07 08:01:57
[14056] Finished loading subject area: SH.
2009-08-07 08:01:57
[58002] Query Cache loaded with 0 entries from saved cache files.
2009-08-07 08:01:57
[43030] : Oracle BI Server started. Version: 10.1.3.3.2.071217.1900.
2009-08-07 08:54:27
[16020] Metadata Database Type: Oracle8.1
Data Source Name: SH
Data Source Type: Oracle 10.02.0030
2009-08-07 08:54:27
Data Source Name: SH
Client Driver Version 10.02.0003
could you help me to fix this sooon.....
Maybe you are looking for
-
Can no longer see text on last 10 pages of screenplay. It was visible before.
I have a screenplay that is about 125 pages in length. I originally wrote it in story.adobe.com free edition. I noticed that the last 10 pages of text are invisible, but the headings are intact so it appears that the text is somewhere inside. I upgra
-
Opening a VI Reference from an Application
I have a VI that calls "Open VI Reference". When I'm developing, its not a problem to generate the path, I just point at the path where the VI is located. When I build an application, what the heck is the path to the VI?
-
I have called up apple support and they have created a new apple id for me but i cannot make a new icloud account nor sign in. Is there anyway to make a new icloud account without affecting my other accounts?
-
Where can I get software for already purchased product?
I lost my copy of Adobe Photoshop CS2 and Design Standard CS4, but I do have the serial numbers. How can I get the software I need?
-
How to convert substring(date) as the format i need...
Hi to everyone... actually i got a field (datetime) in this format: yyyy/mm/dd throught a function, i turned it in ex: 16/12/2012 (italian). the issue comes when i have to concat 2 dates as: min(date) || max (date) (range of the week) to do that, i h