Unable to login Portal

Dear All,
Our endusers are unable to login portal with
" Error occurred while trying to access desktop: "portal_content/every_user/general/com.sap.portal.defaultDesktop".
The object does not exist or you are not authorized to access it.
If this problem persists, contact your system administrator. "
I have applied 869690. But no luck.
Everyone group has access to defaultDesktop.
Main Rule is correct.
Additionaly, admins are able to logon.
Can you please advise?
Regards
Alkan

yes sorry the PCD Name would be Portal Content / Portal Users
You can check the permissions assigned in several ways but the quickest would be to go into System Administration --> Portal Display. Then using the DTN go into Desktops and Display Rules. Find the object in the PCD and look at the permissions set outlined in the Quick Info section below.
It should look something like:
Owner, Full Control, Read and Write, Read, Read (End User)
Or for fuller details you can right click on Default Portal Desktop and click Open --> Permissions
Haydn

Similar Messages

Portal is locked..Unable to login

Hello,
We have edited some settings in Portal Login Server.
Modified following settings:
Number of login failures allowed from one IP address: 3( default was 10)
Single Sign-On session duration: 1 hr (default was 24 hours)
Once I have modified these settings and logged out from Portal,
I am unable to login to Portal again.
Initially it thrown "User is Locked" errors and now it shows standard IE page can't be displayed.
WE ARE UNABLE TO USE PORTAL!!!
Please help.
Madhav

If you remember the portal30_sso shema password, you can still login in the database and directly edit the values of the login server in the portal30_sso table WWSSO_LS_CONFIGURATION_INFO_T.
The columns FAILURE_DAYS, FAILURES_ALLOWED, RESET_DAYS, FAILURES_ALLOWED, IP_RESET_TIME may help you to unlock your account.
Regards,
Jean-Noel

IE10 Unable to Login- Indefinite Spinning Graphic

We currently have 2 Azure subscriptions and I am unable to login to manage.windowsazure.com using either my live ID or federated ID. When trying to login, I get past the first screen with the blue spinning wheel only to get stuck at the second screen
with the spinning wheel (right before the dashboard loads). The dashboard works fine with both Firefox and Chrome and will load up right away.
What is more troublesome is that I have signed up for the developer support subscription and when I try to open a ticket, the support portal is telling me that I only have access to billing support. As a result, I am here as a last resort.
This only is occurring on one of my computers. If I try from another, identical computer with IE10 I am able to login fine. Unfortunately, it is happening on my main system so I would like to try and resolve.
I am currently using Internet Explorer 10 on Windows 7 64-bit. I have tried both 32 and 64 bit versions of IE10 and upgraded to IE11 with the same result. I have tried resetting IE to defaults, tried inprivate and disabled all addons with no success. I have
deleted the cookies folder under my profile (including Low contents) with no success.
Strangely, I found that it does occasionally load for no reason but if I close or logout and reopen the management portal, it hangs again. I have tried pressing "Esc" and the wheel stops but no progress is made.
Any help is desperately appreciated!
-Tony

Hi Itmanager1,
Please find the similar issue here :
http://stackoverflow.com/questions/12137139/why-i-cannot-login-windows-azure-portal-using-my-custom-domain-which-hosted-by-l
As you said, you are only able to create a billing ticket , I recommend you to create a billing ticket .
Let us know if this doesn't help.
Regards,
Shirisha Paderu

Unable to login Release 12

Hi,
We are unable to login, It's EBS release 12.0.4.Apps user was locked due to limited failure attemps. Now we have put it into DEFAULT profile which has unlimited resource limit.Following is application log for oacore
11/04/15 10:48:27.142 html: Servlet error
oracle.apps.fnd.cache.CacheException
at oracle.apps.fnd.cache.AppsCache.get(AppsCache.java:228)
at oracle.apps.fnd.profiles.Profiles.getProfileOption(Profiles.java:1485)
at oracle.apps.fnd.profiles.Profiles.getProfile(Profiles.java:354)
at oracle.apps.fnd.profiles.ExtendedProfileStore.getSpecificProfileFromDB(ExtendedProfileStore.java:211)
at oracle.apps.fnd.profiles.ExtendedProfileStore.getSpecificProfile(ExtendedProfileStore.java:171)
at oracle.apps.fnd.profiles.ExtendedProfileStore.getProfile(ExtendedProfileStore.java:148)
at oracle.apps.fnd.common.logging.DebugEventManager.configureUsingDatabaseValues(DebugEventManager.java:1259)
at oracle.apps.fnd.common.logging.DebugEventManager.configureLogging(DebugEventManager.java:1114)
at oracle.apps.fnd.common.logging.DebugEventManager.internalReinit(DebugEventManager.java:1083)
at oracle.apps.fnd.common.logging.DebugEventManager.reInitialize(DebugEventManager.java:1050)
at oracle.apps.fnd.common.logging.DebugEventManager.reInitialize(DebugEventManager.java:1037)
at oracle.apps.fnd.common.AppsLog.reInitialize(AppsLog.java:595)
at oracle.apps.fnd.common.AppsContext.initLog(AppsContext.java:941)
at oracle.apps.fnd.common.AppsContext.initializeContext(AppsContext.java:926)
at oracle.apps.fnd.common.AppsContext.initializeContext(AppsContext.java:891)
at oracle.apps.fnd.common.AppsContext.<init>(AppsContext.java:751)
at oracle.apps.fnd.common.WebAppsContext.<init>(WebAppsContext.java:1014)
at oracle.apps.fnd.sso.Utils.getAppsContext(Utils.java:525)
at oracle.apps.fnd.sso.AppsLoginRedirect.AppsSetting(AppsLoginRedirect.java:120)
at oracle.apps.fnd.sso.AppsLoginRedirect.init(AppsLoginRedirect.java:170)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpApplication.loadServlet(HttpApplication.java:2379)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4830)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4754)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpApplication.getRequestDispatcher(HttpApplication.java:2978)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:738)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:234)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:29)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:879)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.jav
a:303)
at java.lang.Thread.run(Thread.java:619)
Caused by: oracle.apps.jtf.base.resources.FrameworkException: Error in IAS Cache: java.lang.NullPointerException: null Connection
at oracle.apps.jtf.cache.IASCacheProvider.get(IASCacheProvider.java:712)
at oracle.apps.jtf.cache.CacheManager.getInternal(CacheManager.java:4802)
at oracle.apps.jtf.cache.CacheManager.get(CacheManager.java:4624)
at oracle.apps.fnd.cache.AppsCache.get(AppsCache.java:216)
... 33 more
Caused by: oracle.apps.jtf.base.resources.FrameworkException:
An exception occurred in the method CacheAccess.get
null
The base exception is:
null Connection
at oracle.apps.jtf.base.resources.FrameworkException.convertException(FrameworkException.java:607)
at oracle.apps.jtf.base.resources.FrameworkException.addException(FrameworkException.java:585)
at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:66)
at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:88)
at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:202)
at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:218)
at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:249)
... 37 more
11/04/15 10:50:24.630 html: 10.1.3.4.0 Stopped
Checked the ID 414170.1, but dint help. DBC file has proper Guest password.
Pleasesuggest the solution

Hi;
If you cant still login EBS than i belive you dont have problem wiht apps password. If possible
1. Close apps services
2. Restart db and run autoconfig first (be sure autoconfig end wihtout error)
3. Compile JSP on appstier (be sure autoconfig end wihtout error)
Release 12 - How To Bounce Apache And Clear HTML Cache In Vision Instance And Have Updated Java Code Class Active [ID 471763.1]
How To Clear Caches (Apache/iAS, Cabo, Modplsql, Browser, Jinitiator, Java, Portal, WebADI) for E-Business Suite? [ID 742107.1]
4. Run autoconfig on appstier
5. Run adadmin and compile invalid objects
6. Up services
If you have still issue than enable trace and let us see what happen:
FAQ: Common Tracing Techniques within the Oracle Applications 11i/R12 [ID 296559.1]
R12, 12.1.1 - How To Enable and Collect Debug for HTTP, OC4J and OPMN [ID 422419.1]
Regard
Helios

Unable to Login to OAM after cloning

Hi,
I am unable to login to OAM after cloning. I am getting the message "The page cannot be displayed" when clicking on OAM front end link.
Application version: 11.5.7
Message from the error_log
/apps/ts2aps/product/iAS/Apache/Apache/logs > tail -100 error_log
DBC file :Applications
DBC file :Applications
log Message called
log Message called
log Message called
log Message called
log Message called
log Message called
*[Mon Apr 5 00:44:20 2010] [error] OPM: EW: Fail to start process with mod=JServ and grp=OACoreGroup, it's possible that your configuration file is not correct.*
Please let me know for any other details.
Regards,
Mukarram

http://<host_name>:32001/OA_HTML/jsp/fnd/aoljtest.jsp
I am getting "The page cannot be displayed" for my hostname, after running the above URL.
Error Message from error_log
[Mon Apr 5 21:55:52 2010] [error] [client 64.100.24.42] client denied by server configuration: /apps/ts2aps/common_top/portal/oprocmgr-service
[Mon Apr 5 21:55:53 2010] [error] [client 64.100.24.42] client denied by server configuration: /apps/ts2aps/common_top/portal/oprocmgr-service
log Message called
TransportAgentMain init called.
Deug mode false
Before loading jdbc drivers
Before creating Connection Pool instance
Setting INit Connections
No of Connections to be created 5
Connection no 0
DBC file :Applications
Connection no 1
DBC file :Applications
Connection no 2
DBC file :Applications
Connection no 3
DBC file :Applications
Connection no 4
DBC file :Applications
INit Connections done
log Message called
log Message called
DBC file :Applications
log Message called
DBC file :Applications
log Message called
log Message called
log Message called
log Message called
DBC file :Applications
DBC file :Applications
DBC file :Applications
log Message called
log Message called
log Message called
log Message called
log Message called
[Mon Apr 5 22:09:53 2010] [error] OPM: EW: Fail to start process with mod=JServ and grp=OACoreGroup, it's possible that your configuration file is not correct.
Please let me know for any details.

Unable to login in to Mac App Store using valid account.

I recently inherited a spare MacBook Air from my wife (who got a new one). I deleted her user account, and set up a new admin user account for me. The machine is running 10.7.5.
Now, I am absolutely unable to login to the App Store. I am using my valid Apple ID -- for example, the same Apple ID that I used to gain access to this very forum. System Preferences accepts my ID. iTunes accepts my ID. BUT the App Store will aboslutely NOT respond. It will not load. I get the red "connection failed" alert, and then after several tries it doesn't respond at all.
It doesn't give any option to switch users -- perhaps once the original owner has used the App Store, the computer will never again allow anyone else to use it? It doesn't say that there is another user logged in. There appears to be no way of deleting and reinastalling the App Store. There is no cache file I can find to be cleared. There is no preference option. There is no information. There appears to be no way of fixing this at all, short of wiping the hard drive and reinstalling the operating system. Is that what I have to do? WHY IS THIS SO HORRIBLY DESIGNED? And why is there no support short of the forum? I hate this about Apple (despite being a long-time Apple evangelist and OSX devotee).
Thanks.

The first thing you should do after acquiring a second-hand computer is to erase the internal drive and install a clean copy of OS X. How you do that depends on the model. Look it up on this page to see what version was originally installed.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard installation disc, which you can get from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. I suggest you install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the gray installation discs that came with it. If you don't have the discs, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, it should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
Once booted from the disc or in Internet Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive, which is what you should do.
After partitioning, quit Disk Utility and run the OS X Installer. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
You should then run Software Update and install all available system updates from Apple. If you want to upgrade to a major version of OS X newer than 10.6, buy it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.

I am unable to login from my login page after I restarted my mini mac running snow leopard 10.6 server. I am a new user. Need help

I am unable to login from my login page after I restarted my mini mac running snow leopard 10.6 server. I am a new user. Need help

Try clearing your cache, [https://support.mozilla.org/en-US/kb/How to clear the cache Instructions here]. Then, try going to [https://accounts.google.com Google Accounts]. If there is currently an account singed in, sign out, then back in. After that, try going to Google Adwords.

Unable to Login to Creative Cloud App

Photoshop CC was crashing every time I attempted to open a new file inside of the application (Photoshop would stay open as long as did not attempt to open a file.)
I uninstalled PS CC.
When I attempted to reinstall. I received the following message in the CC app:
"Unknown Server Error: Sign in is currently unavailable. We are unable to access your account. Please try again later."
I ran the CC cleaner, restarted, and reinstalled CC. I am still receiving the message and unable to login.
My password has been reset from the recent security warning, and I am able to login to my Adobe account online, and everything seems to be in order.
I am running on OS X 10.8.5.
HELP, please.

Hi Bethany,
Welcome to the Community!
Try Solution 2 in this link: http://helpx.adobe.com/creative-cloud/kb/unknown-server-error-launching-cc.html, if doesn't work then try others.
Thanks!
Ankit

Issue with cisco acs 4.2.Users unable to login aaa client but after restarting group policy able to login

issue with cisco acs 4.2.Users unable to login aaa client but after restarting group policy able to login

issue with cisco acs 4.2.Users unable to login aaa client but after restarting group policy able to login

Unable to login with Jabber Windows

Hi ,
Am unable to login the Jabber Windows Client. Getting the error as "Unable to Communicate With the Server".
Able to login with CUPS & CUCM end user page. CUCM Integrated with LDAP.
While going through the UP Profile logs seen that "Failed to SOAP login".
Tried with restart of CUCM & CUPS several times but no go.
CUCM Version - 8.6.2
CUPS Version - 8.6.1
Tried with CUPC client result also same.
Thanks in Advance

If credentials work on CCMuser CUPSuser I would suspect either some kind of communication problem between the clients and the servers and/or misconfiguration (user/device/line association, device owner, roles, CTI/CCMCIP profiles, etc) on CUCM/CUPS.
Specially because you mention the same happens with CUPC.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk

Unable to login with my ID and password

Hi guys need help. I am unable to download any App as i am getting an error while logging to my account with the username and password. I tried logging into the website from my laptop i was able to. Pls help, i am unable to download anything that requires username and pass.
The error i am getting is "Unable to login to your Blackberry ID account".
Regards
Kiran

kiran217 wrote:
Hi guys need help. I am unable to download any App as i am getting an error while logging to my account with the username and password. I tried logging into the website from my laptop i was able to. Pls help, i am unable to download anything that requires username and pass.
The error i am getting is "Unable to login to your Blackberry ID account".
Regards
Kiran
HI Kiran217
Welcome to BlackBerry Support Forums
Sorry to hear that you are having proble with your BlackBerry®Torch9810.Please go through this Knowledge Base Article and try all suggestion and see if that helps.But first do your Device backup because there is a suggestion within this KB as a last resort in which case you may need that.
KB28212 : "Unable to login to your BlackBerry ID account" or "Unable to update your BlackBerry ID account information" error occurs on a BlackBerry smartphone running BlackBerry 7
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

User having all authentication but unable to login in planning why ?

user having all authentication but unable to login why in planning ?

You might need to give some more details.
For example, what kind of provisioning in shared services, under what groups if any, what kind of dimension level access in planning etc?

Unable to Login into APEX after upgrade from ORACLE XE to APEX 3.2

Hi,
I have upgraded Oracle 10g XE to with apex_3.2 on the Windows XP.
My ORACLE XE wa in folder "C:\ORACLE XE"
And APEX 3.2 in folder "C:\Ver 3.2\APEX"
Once you complete the standard install, i performd the following steps to complete
the upgrade which i got on my previous post.
Till normal installation i was able to login in Apex link and was able to run my application which was
in oracle XE but the only problem was i was unable to see any images in "EDIT PAGE" but my application was running well.
then i did following steps to get those images
Connect to SQL*Plus as SYS
@APEX_HOME/apex/apxldimg.sql APEX_HOME
@APEX_HOME/apex/apxxepwd.sql password
(where password is the password of the Application Express internal ADMIN account)
I chanbged image directory as below
FROM:
create directory APEX_IMAGES as ‘&1/apex/images’ ;
TO:
create directory APEX_IMAGES as ‘c:\oraclexe\apex\images’ and also tried ‘c:\ver 3.2\apex\images’;
Ran @apxldimg.sql
@apxxepwd.sql password (where password is the password of the Application Express internal ADMIN account)
Exit from the SQL*Plus session.
Change directory to c:\oraclexe\apex\owa, open the README.TXT file and follow the instructions within to complete the installation
But now i am unable to login into the page itself. It "showing Page Not Found"
Please kindly help me how to run APEX now through link.
Thanks in advance.
Thanks & Regards
Sanjay
Edited by: user11204334 on Aug 11, 2009 2:05 AM
Edited by: user11204334 on Aug 11, 2009 4:30 AM

Hi John,
Thanks for reply
I got error while doing following steps in few procedures
Change directory to c:\oraclexe\apex\owa, open the README.TXT file and follow the instructions within to complete the installation
Before doing the above step i was able to login into my application but without images
Can you please help that how to check those errors and any particular procedure you know which is responsible for the Login problem.
Thanks a Lot for help John
Thanks & Regards
Sanjay

Open Directory - Unable to login Workgroup Manager

I am unable to login to Workgroup Manager with my diradmin account.
I know the password is correct.
This is on Mac OS X Lion 10.7.2
Everything was working fine last night, but then it stopped functioning. I am able to see all the users, but they are greyed out. When I try to login, I get "The login information is not valid for this server"
The LDAP log shows a bunch of the same errors that it did not show before.
slapd[76]: SASL Failure: GSSAPI Error: Miscellaneous failure.
Please advise. Thank you.
Samson

Try logging in to Workgroup Manager using the local admin account not the diradmin account. If this works, then try accessing the /LDAPv3/127.0.0.1 choice using the diradmin account.

How can I restrain the user login portal once, in the same time ???

Hi
I need to restrain the user can't repeat to login portal ....
to reduce portal loading
How can I restrain the user login portal once, in the same time???
Which attributs in Identity Manager or amconsole I can do it to restrain the user ??
tks

Does your portal support anonymous access? If so, make sure you are using the authlessanonymous mode. This mode only creates one session that is shared for all anonymous users. This is much more efficient than anonymous access, which creates a session for each anonymous user.
I have no other recommendation for limiting users to a single login. In general, web applications do not behave like this. What if a user closes their browser without logging out? Does the user have to wait until the session times out in order to log back in again?
The same thing is true for users that are mobile. If a user leaves their office without logging out and then attempts to log in with a laptop in the conference room, then access will be denied in your implementation. Users do not expect this type of limitation being built into the system.
If you are having problems scaling, then you need to look at your architecture and perhaps add some more resources. Also, make sure you are making efficient use of the authlessanonymous access mode as stated above.
- Jim

Unable to login Portal

Similar Messages

Maybe you are looking for