Unable to login to Administration Tool

Hi,
i've following problem.
I'm trying to open rpd in Online Mode using Administration Tool on Oracle Business Intelligence Suite 11g. But when i insert user e password i receive following error:
"Logon Failed".
I've investigated on error cause and opening Administration Tool log file i find following error traced:
[nQSError: 61013] File error: path=C:\app\oracle\product\ofm\instances\instance1\bifoundation\OracleBIServerComponent\coreapplication_obis1\repository\OBI11_merged_BI0020.rpd, code=32: There has been a sharing violation.
Repository password is correct because i'm able to open rpd in Offline Mode using it
In addition i'm able to login in Analytics and Enterprise Manager environment with weblogic username and password. I insert the same credentials when i open rpd in Online Mode
How can i resolve the problem? Thanks

Hi,
This is interesting!! After running through the thread, I suspect there is some issue with your configuration not the .rpd. Taking your words that replacing your old .rpd does not work too and of course the your old .rpd would have worked, here are my prime suspects
1. Some clustering setup running behind scenes. I not get any other instance, when a .rpd could be shared except when a master .rpd is shared with cluster servers. So is the "Sharing violation" error.
2. Some Init blocks in your .rpd with "Required for Authentication" set. For example, an init block with "required for authentication" is bound to fail and not let you in online mode, when the underlying source/ DSN etc has issues.
So, check on these guys and see if you nail them down first.
Hope this helps.
Dhar

Similar Messages

WAAS 3.5, unable to login to administrator page.

Hello All
We recently installed WAAS Mobile Server 3.5,the installation was sucessful, all the pre requisite was fulfilled for the installation
But we are unable to log in to the administration page, keep getting the erro invalid username and password.I did some check on the IIS but no results, would appreciate any assistance on this.
Thank you,
Subu

Hi
After you install the WAAS Mobile Server, you should be able to open the WAAS Mobile Manager Login page and login using the default usernames and password. The default username is admin and password is default
This is described in the WAAS Mobile Server installation guide on Page number 19 in the link below:
http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas_mobile/v3.5/configuration/administration/guide/CiscoWAASMobileAdminGuide_3_5.pdf
Regards
Rama

Unable to login as administrator after creating new standard account

Just got a nice new MBP form work today.
When logged in as the admin I created a new standard account for my personal use. I then shut down the laptop.
After booting up I am presented with a default icon, my standard use name, and a field to enter my password. I can login to this account fine. If I click on the arrow next to the username (this seems pretty poor UX - it annoyingly takes a while to appear, and how is a new user supposed to know what it is for? /vent), and then click on 'other' and enter my admin username and password, it is not accepted and the password field just shakes.
Am I missing something obvious?
Many thanks.

@Frank Caggianoy
Yep, the Display login window is set to List of users. The password that has been set up is the passwsord I've been using for several months at work, so that cannot be the issue.
@nbar
When I set up the standard user account, there was definately an administrator account in the user list. I also installed some work related applications which are not present when logged in to the standard account.
I've got to say that these forums are very helpful - thanks for the suggestions. I'll speak to the person who set up everything tomorrow, and post back what the problem/solution was.
Cheers.

Unable to login to Administration Console

Hi,
I am evaluating WL 6.0.
I am trying to login into the Administration server using the Administration Console, which prompts for the username and password.
The documentation said:
The first time the Administration Console is started, you can use the user name and password under which the Administration Server was started
what user name and password is the documentation talking about?
Thanks,
Hien

sorry, I just figured it out. The user name is 'system'.
"Hien Luu" <[email protected]> wrote:
>
Hi,
I am evaluating WL 6.0.
I am trying to login into the Administration server using the Administration Console, which prompts for the username and password.
The documentation said:
The first time the Administration Console is started, you can use the user name and password under which the Administration Server was started
what user name and password is the documentation talking about?
Thanks,
Hien

HANA Admin tool error - unable to login

Hello HANA Developer / admin gurus!
I am unable to login to XS Administration Tool (DB version rev.74).
Using Chrome's Developer tool following error was captured:
http://<hostname>/sap/hana/xs/formLogin/login.xscfunc 500 (Internal Server Error)
Apart from this very generic error, I am unable to find any other traces / error logs.
My user-id has all relevant (and probably more!) xs roles; still unable to find the root cause.
Any help is highly appreciated.
Thanks in advance,
Shaji

To whoever is interested, this issue is now resolved.
Resolution details in document HANA XS Engine Logon Error - with Resolution.
Hope you find this useful.
Best regards,
Shaji

Unable to install Remote Server Administration Tools for Windows 8 Release Preview on RTM 8 Enterprise

Unable to install Remote Server Administration Tools for Windows 8 Release Preview on RTM 8 Enterprise
Standalone installer available here
http://www.microsoft.com/en-us/download/details.aspx?id=28972
fails with error code 0x80004005
Is this because my installation has issues, or would the admin pack files be updated for RTM?
Thank you in advance for any insight

Found the solution here:
http://social.technet.microsoft.com/Forums/en-US/w8itprogeneral/thread/6d8745e0-c4c1-463a-b4bb-09f6c9c22527
Workaround:
Download the RSAT package intended for Windows 8 Release Preview: http://www.microsoft.com/en-us/download/details.aspx?id=28972
Extract the .msu file with a tool such as 7-Zip.
Open an Admin command prompt and change directory to where you extracted the .msu.
Run the following command to install (if x86 you probably have a different .xml filename): pkgmgr /n:Windows6.2-KB2693643-x64.xml
Wait a while. You can look in task manager for pkgmgr. When it disappears, the installation is done.
Use the tools as per usual.

Administration Tool login via 10817 failed

Hi,
Have a problem for a long time on login issue to the administration tool via ksvradmin in iAS 6.5. Lived with it until recently as need to change some parameter thru the admin tool.
Does anyone has had this problem and got it solved? When attempting to register a server using the default info as below, it keep prompted me login failure:
Name: iAS1
Hostname: localhost
Port: 10817
Username: admin
Password: xxxxxxxxxxxx
I do not have any problem connecting to the iDS or startup any of the services just that I cannot login and register an server. Please share your experience/solution to the above issue if you have resolved such issue before. Thank you.

Hi,
This is interesting!! After running through the thread, I suspect there is some issue with your configuration not the .rpd. Taking your words that replacing your old .rpd does not work too and of course the your old .rpd would have worked, here are my prime suspects
1. Some clustering setup running behind scenes. I not get any other instance, when a .rpd could be shared except when a master .rpd is shared with cluster servers. So is the "Sharing violation" error.
2. Some Init blocks in your .rpd with "Required for Authentication" set. For example, an init block with "required for authentication" is bound to fail and not let you in online mode, when the underlying source/ DSN etc has issues.
So, check on these guys and see if you nail them down first.
Hope this helps.
Dhar

Unable to create a clustered VM using Remote Server Administration Tools - Failover Cluster Manager

Hi
I am using two Hyper-V Server 2012 R2 and a single WS2012 Datacenter Edition with GUI Interface for management purpose.
I have installed Failover Clustering feature on these two Hyper-V servers and remote server administration tools for Failover Clustering on WS2012 DC Edition with GUI.
I have created cluster using powershell cmdlets on Hyper-V server because I was unable to create a cluster using RSAT-Failover Clustering (May be some privileges issues).
The problem is " I am still not able to create a Hyper-VM using Failover Cluster Manager on WS2012 DC Edition server". It gives me an error "Invalid operation"
Any Help regarding this issue will be very appreciated.
Thanks in Advance.....
Abhinav | MCTS-Server Virtualization

Thanks Tim for your response but atleast I should be able to create and configure VMs for high availability.
I think this is not the issue which I am facing. It gives me an error "invalid class". There is something missing.
Please check and let me know if it can be solved. Any help will be really appreciated.
Thanks in advance.
Abhinav | MCTS-Server Virtualization

Sync Tool error: Unable to Login to Server

Hello - we're using the SunONE Sync Tool v1.1 and have a user trying to synchronize with Outlook, but the tool keeps throwing an "Unable to Login to Server" error, although the exact same username, password, server and port # work on the browser login. This is the only user with this problem; on other machines (with the same OS and version of Outlook, the sync tool works for the most part - at least it lets the user login).
We've tried re-entering the settings, re-entering the password and the next step will be a re-install of the sync tool.
Any ideas? Thanks!
_Khalid J Hosein
Sys Admin

Hi,
I am also facing exactly the same probelm with one of the user. I have tried re-installing the sync tool. But with the same error message "unable to logon to the server" . I have looked into the logs the only thing I could find is the following error message
ReadWordFromRegistry: Registry open system eerror message- the system cannot find the fiel specified , error code:2 "
I have tried on 3 other system and it works omethly except for this user.
I have exhausted all my options but no luck so far .
Can someone help !

Unable to Login in Portal as Administrator or any other User

When I try to login as Administrator in portal.. It do not display any error message but at top it still displays as GUEST only.. when i checked in I have cheked in log file PTMAchine.log it shows as 6/7/04 13:47:29- Connected as user 'Administrator' But doesnt display appropriate message on screen.
I have checked in database that the User Administrator exits... Table Name - PTUSERS LoginName - Administrator Password - Enrypted Thanks

Kalimuthu V wrote:
Vimal,
Are you getting any error stack or any particular error message other than what you mentioned?
Btw, if it is after some change or something better you raise an SR with Oracle support to get this fixed.
Thanks.
With Regards,
Kali.
OSSi.hi kali
No i didnt not get any error stack, page with above error only.
Actually i was trying to use digitle signature based approval for workflow notification and it got errored out. i closed the window and try to login with sysadmin user it got above message, I tried after sometime n now i am able to login. I could not understand the behaviour.
Regards

Server admin is unable to login to server.app after upgrade to Mountain Lion Server?

After upgrade to Mountain Lion Server I am unable to login to the server tools. When I input the admin user name and password the dialog box just shakes indicating the wrong password. But it is the correct password. How do I reset the password or if necessary how do I rest the server and start over on Mountain Lion. I found info on how to reset the server on previous versions of the server which involved executing a plist in the LaunchDaemon folder. However that file does not exist on the server following upgrade to Mountain Lion.
Thanks, Howard

I upgraded today and had the same issue. I took following steps to fix my computer.
Boot into Recovery Partition (Hold Option Button while booting)
Open Terminal.
Type resetpassword
Select your hard drive
Select the user account (Administrator)
Enter a new password for the user
Reenter password
Save
Restart
Boot normally, Login as Adminstrator with the new password and add "Admin" permission to your account.
Restart
Everything should be working as expected

Unable to login to apex as admin after apparent successful installation

I am unable to login to apex as admin after an apparent successful installation.
I have an existing Oracle database 11.2.0.1.0 with Oracle Text running on Windows 7 Professional with hundreds of gigabytes of free disk space available. I did everything as an operating system user with administrator privileges. I downloaded the latest version of apex 4.0.2 for all languages, unzipped the downloaded zip file, extracting all files to an apex directory. I changed the working directory to apex and started sql*plus, connected sys as sysdba, ran apexins.sql installation, apex_epg_config.sql and apexconf.sql configuration, apexchpwd.sql to change the admin password, and apxldimg.sql to copy the images, and exec dbms_xdb.sethttpport(8080), unlocked accounts, and granted connect privileges.
The installation log did not show any errors and included:
"Thank you for installing Oracle Application Express.
Oracle Application Express is installed in the APEX_040000 schema.
The structure of the link to the Application Express administration services is as follows:
http://host:port/pls/apex/apex_admin (Oracle HTTP Server with mod_plsql)
http://host:port/apex/apex_admin (Oracle XML DB HTTP listener with the embedded PL/SQL gateway)
The structure of the link to the Application Express development interface is as follows:
http://host:port/pls/apex (Oracle HTTP Server with mod_plsql)
http://host:port/apex (Oracle XML DB HTTP listener with the embedded PL/SQL gateway)
JOB_QUEUE_PROCESSES: 1000"
When I use either browser, Firefox 3.6.12 or Internet Explorer 8.0, and go to http://localhost:8080/apex/apex_admin I get a screen that says:
"Enter Application Express internal administration credentials"
and has boxes for a username and password. When I enter admin and the admin_password that I selected, then click on login nothing happens. I don't get logged in. I don't get an error message. It does not show any signs of anything running. It just sits there. I also don't get any messages from Windows or Norton 360 indicating that a pop-up window was blocked or any such thing. I checked that the services are running and also tried shutting down the computer and re-starting (cold boot), but was still unable to login.
I am a retired developer, not a DBA, so if there is anything else that I should do or check or provide, then please let me know. I have provided a copy and paste of everything that I could think of below. Oddly I don't see an admin user.
SQL> select * from v$version
2 /
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE     11.2.0.1.0     Production
TNS for 64-bit Windows: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
SQL> select status from dba_registry where comp_id = 'APEX'
2 /
STATUS
VALID
SQL> select username, account_status
2 from   dba_users
3 where username = 'ANONYMOUS'
4 or     username like 'APEX%'
5 or     upper (username) = 'ADMIN'
6 order by username
7 /
USERNAME                       ACCOUNT_STATUS
ANONYMOUS                      EXPIRED
APEX_030200                    EXPIRED
APEX_040000                    OPEN
APEX_PUBLIC_USER               OPEN
SQL> select dbms_xdb.gethttpport from dual
2 /
GETHTTPPORT
       8080
SQL> select owa_util.get_version from dual
2 /
GET_VERSION
10.1.2.0.8
SQL> show parameter memory_target
NAME                                 TYPE        VALUE
memory_target                        big integer 1536M
SQL>

Are you sure you did give right path to script ? Yes.
>
If you extract files to folder c:\temp, you have after that folder c:\temp\apex and bunch of sub folders.
For script to update images, you give path to folder where you did extract apex install files.
In above case that is then c:\temp .
>I created a directory c:\apex on my laptop. I downloaded the zip file to that directory. When I extracted the files to folder c:\apex, the result was c:\apex\apex with a bunch of sub folders and files. When I ran the script, I gave the path c:\apex as indicated in my copy and paste. So, I did everything the same as in the quote above, except that I used apex instead of temp.
Try extract Apex install zip to c:\temp and give c:\temp as path for scriptAre you suggesting that I redo the entire installation using c:\temp instead of c:\apex? What difference would that make? Would I need to do some sort of uninstall first?

Oracle BI EE Administration Tool Not starting up

Hi All,
I have installed BI EE on windows xp and when I tried to start the Administration tool nothing happens. Can anyone assist please.
Regards
Remeez

Hi,
Probably I found a workaround to this problem: runas command. This gives a possibility to start admintool using an other user. You can find runas command syntax here http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/runas.mspx?mfr=true.
In my case, I changed Administration shortcut Target (Start -> Oracle Business Intelligence -> Administration and right click properties) to this: C:\WINDOWS\system32\runas.exe /user:RISTOS-XP\administrator C:\OracleBI\server\Bin\AdminTool.exe
I first tried this (thanks to my old gollege in Oracle Finland) as right click admintool.exe and selecting " Run as" and then "The following user:" and Administrator of my computer. I'm not sure, why I have this starting problem, maybe because I have to use Domain\UserId login. My domain login belongs to the local administrators group, but for some reason in this case it is not enough ..
- Risto
Message was edited by:
risto.soikkeli

After configuring DMZ unable Supplier login to Sourcing modules

After configuring DMZ unable Supplier login to Sourcing modules
You have encountered an unexpected error. Please contact the System Administrator for assistance.
Regards,
Amit Chowrasia

mikey.askdbaonline wrote:
Anybody face this issue earlier we are also getting error
[Wed Jan 16 07:28:08 2013] [error] mod_ossl: Unknown error
[Wed Jan 16 07:28:08 2013] [error] mod_ossl: SSL call to NZ function nzos_Handshake failed with error 29014 (server test.com:4443, client 192.168.1.22)
[Wed Jan 16 07:28:08 2013] [error] mod_ossl: Unknown error
[Wed Jan 16 07:28:08 2013] [error] mod_ossl: SSL call to NZ function nzos_Handshake failed with error 29014 (server test.com:4443, client 192.168.1.22)
[Wed Jan 16 07:28:08 2013] [error] mod_ossl: Unknown error
Regards,
Amit ChowrasiaWhat is your application release? What version of JRE you are running?
Is SSL enabled?
Is the issue with one module only?
What document did you follow to implement DMZ?
Can you find any errors in access_log file (assuming the above from error_log file)?
Can you find any errors in the application.log file and/or in the database log file?
Thanks,
Hussein

Unable to login to cmc after installing business objects xi 3.0

Hi Friends,
I'm new to Business Objects, i've installed bussiness objects XI 3.0 and i did not specify the user name and password during installation (since there was a checkbox option to configure it later after installation). Now i've troble logging in. I tried to login using Administrator as username and no password, its neither logging in nor giving me an error message but asking me to provide login details, whereas i could login with the same administrator as username into Business View Manager and Diagnostic Tools. Please help.
thanks.

Change your URL to the IP address of the server or FQDN.
Also try to disable windows enhanced security if using 2003.
Most common causes of this are DNS issues or session problems with the browser (bothh may be resolved with the steps above).
Regards,
Tim

Unable to login to Administration Tool

Similar Messages

Maybe you are looking for