Unable to login to console - "Incompatible Server"?

Good afternoon everyone,
So I've installed SMC 4 on a V480 with Solaris 10 11/06, and I've installed some of the relevant add-ons. I did have to deviate from the default port during installation/setup, so I used the port shown in the documention (1161). I originally tried to open the console using "es-start -c", but I kept getting the registration question, and then it would stop execution of the script after I tried to answer the question; another thread here lead me to the "javaws" command to take me through the registration process successfully, and I was able to figure out that I needed to include the port in the command, "es-start -c -- -p 1161" to get the login prompt. However, when I put in my credentials, I get this error:
"Communication could not be established with the server. The server version may be incompatible."
Can anyone help me with this error? Thanks!
- Dion

same problem.
SunMC 4.0 was running fine, I added a handful of servers before.
But a few of the server icons where blue although I installed the agent Addon.
So I thought, maybe I have to install the Addon package as well on the SMC server (I can't remember if I did that already):
! root@sunmc:/tmp # tar xvf Sun_MC_Addon-4_0_V5-GA.tar
! root@sunmc:/tmp # es-inst
Enter the source directory of the installation files: /tmp/disk1/image
Reading Add-On products from image. Please wait...
This can take approximately 3 minutes to complete.
Found: ELP Config-Reader Monitoring
Checking for applicable products. Please wait...
This can take approximately 2 minutes to complete.
The following Add-On Products are applicable for installation.
    ELP Config-Reader Monitoring
    It appears that an earlier version of this product is installed on your system.
    You have the following version installed : 3.6-v7
    You may upgrade to version : 4.0-v5
    To install this product, the installed version will have to be removed.
Do you want to select all the products (y|n|q) y
The following Add-On Products will be installed:
ELP Config-Reader Monitoring
Installed versions of following Add-On Products will be upgraded:
ELP Config-Reader Monitoring
Do you want to proceed (y|n|q) y
Removing installed Add-On: ELP Config-Reader Monitoring
This script will help you to uninstall the Sun Management Center software.
java server is not running
Calling Uninstall script of ELP Config-Reader Monitoring...
Making list of packages to uninstall...
Sorting list of packages according to reverse timestamp...
Removing package : SUNWesers...
Removal of <SUNWesers> was successful.
Removing package : SUNWesons...
Removal of <SUNWesons> was successful.
Status of uninstallation:
PRODUCT                                                  STATUS
ELP Config-Reader Monitoring                             Removed
Disk Space Checking....
Processing package instance <SUNWescci> from </tmp/disk2/image/SunOS/sparc/Addons/CommonConfigReader/Common/Basic>
Sun Management Center Common Config Reader Module Initialization(all) 4.0-v5,REV=2.8.2008.10.10
## Executing checkinstall script.
Copyright 2008 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
Using </opt> as the package base directory.
## Processing package information.
## Processing system information.
   1 package pathname is already properly installed.
Installing Sun Management Center Common Config Reader Module Initialization as <SUNWescci>
## Installing part 1 of 1.
/opt/SUNWsymon <conflicting pathname not installed>
/opt/SUNWsymon/addons/CommonConfigReader/classes/SetupArchive.class
/opt/SUNWsymon/addons/CommonConfigReader/lib/locale/install/classes/CCRProps.properties
/opt/SUNWsymon/addons/CommonConfigReader/sbin/es-setup.sh
/opt/SUNWsymon/addons/CommonConfigReader/sbin/es-uninst.sh
/opt/SUNWsymon/addons/CommonConfigReader/sbin/setup-resp.sh
[ verifying class <none> ]
/opt/SUNWsymon/classes/base/console/cfg/topoimages/T5240-small.gif
/opt/SUNWsymon/classes/base/console/cfg/topoimages/T5240-xlarge.gif
/opt/SUNWsymon/classes/base/console/cfg/topoimages/T5440-small.gif
/opt/SUNWsymon/classes/base/console/cfg/topoimages/T5440-xlarge.gif
[ verifying class <none> ]
Installation of <SUNWesons> was successful.
You must perform setup before using Sun Management Center 4.0.
Do you want to run setup now (y|n|q)
  Enter "y" or "n" or "q"
Do you want to run setup now (y|n|q) y
This script will help you to setup Sun Management Center 4.0.
Documentation of Sun Management Center is not available on
Sun Management Center DVD image, For all Sun Management Center
documentation please visit :
http://docs.sun.com/app/docs/coll/1734.1 website
Setting up Addon[s]...
Starting Sun Management Center Entry Level Platform Config Reader Server Setup
Updating the Addon[s] family registry in database. Please wait..
Addon[s] registry updated..
Do you want to start Sun Management Center agent and server components now (y|n|q) y
Java server started successfully.
Grouping service started successfully.
Could not start Agent.
Topology service started successfully.
Trap-handler service started successfully.
Configuration service started successfully.
Event-handler service started successfully.
Metadata service started successfully.
Web server started successfully.
You can register this installation of Sun Management Center
with Sun Microsystems, Inc.
To Register, You may launch the Product Registration Client
using the new browser user interface by selecting the Register
link in the Tools accordion or, by clicking Tools Register menu item
in the Sun Management Center Java based console.
Alternatively, you may also launch the Product Registration Client
using the command:
javaws https://sunconnection.sun.com/RegistrationClient/client.jnlp
Setup of Sun Management Center is complete.
Setup logfile is : /var/opt/SUNWsymon/install/setup_sunmc.090526174913.25758
Install logfile is : /var/opt/SUNWsymon/install/install_sunmc.090526174058.9888
                        End of Installation
Exiting Sun Management Center 4.0 installation.Now, if I start the Console
! root@sunmc:/tmp # es-start -cand try to login, I get the same error.
Why?
Where is a logfile about it?
-- Nick

Similar Messages

  • DS 5.2.4 Upgrade Issue - Unable to login to console

    Hello! I have not been able to login to DS console after I have patched it to 5.2.4. I have found another thread with the same issue with solution https://forums.oracle.com/forums/thread.jspa?messageID=8517561 (add ldap library into runtime linking environment using crle) provided but I'm still unable to login to console after I applied the solution. Please kindly advise! Thank you.
    [10/Apr/2012:18:59:52] info (21546): SunONE-WebServer-Enterprise/6.0SP3 B05/19/2004 02:48
    [10/Apr/2012:18:59:52] info (21546): Access Host filter is: *.abc
    [10/Apr/2012:18:59:52] info (21546): Access Address filter is: *
    [10/Apr/2012:18:59:52] info (21547): Installing a new configuration
    [10/Apr/2012:18:59:52] info (21547): [LS ls1] http://abc.com, port 390 ready to accept requests
    [10/Apr/2012:18:59:52] info (21547): A new configuration was successfully installed
    [10/Apr/2012:18:59:52] info (21547): Using the Java HotSpot(TM) Server VM v1.4.2_03 from Sun Microsystems Inc.
    [10/Apr/2012:18:59:52] info (21547): Java VM classpath: /var/Sun/mps/bin/https/jar/NSServletLayer.jar:/var/Sun/mps/bin/https/jar/NSJavaUtil.jar:/var/Sun/mps/
    bin/https/jar/NSJavaMiscUtil.jar:/var/Sun/mps/bin/https/jar/servlet.jar:/var/Sun/mps/bin/https/jar/servlet-2.3-filters-api.jar:/var/Sun/mps/bin/https/jar/jsp
    engine.jar:/var/Sun/mps/java/ldapjdk.jar:/var/Sun/mps/java/jss311.jar:
    [10/Apr/2012:18:59:52] info (21547): Loading IWSSessionManager by default.
    [10/Apr/2012:18:59:52] info (21547): IWSSessionManager: Maximum number of sessions is 1000
    [10/Apr/2012:19:00:05] failure (21547): for host ::ffff:x.x.x.xtrying to GET /admin-serv/authenticate, cgi-parse-output reports: the CGI program /var/S
    un/mps/bin/admin/admin/bin/userauth did not produce a valid header (program terminated without a valid CGI header. Check for core dump or other abnormal term
    ination)
    [10/Apr/2012:19:04:38] failure (21547): for host ::ffff:x.x.x.xtrying to GET /admin-serv/authenticate, cgi-parse-output reports: the CGI program /var/S
    un/mps/bin/admin/admin/bin/userauth did not produce a valid header (program terminated without a valid CGI header. Check for core dump or other abnormal term
    ination)
    Edited by: Albert.C on Apr 11, 2012 10:37 AM
    Edited by: Albert.C on Apr 11, 2012 10:39 AM

    Hi anyone can advise me on this?

  • Suddenly unable to login via console

    I restarted my guest that's been running fine for a few days, and suddenly I am unable to login thru the java browser-based console thru the VM Manager.
    Everything about the console looks fine: It shows me all the usual startup messages if I open it while the VM guest is booting, it prompts me for the login username and password but instantly returns to the "TestVMHost login:" prompt after entering the correct password. It does this for all three plain users and root that I have established in this VM guest.
    I can SSH into the VM guest just fine with PuTTY over the network and login with any valid username/password, so I am not locked out of access to the VM guest. It's just the java-browser console app itself that suddenly stopped letting me login.
    Any ideas?
    PS: the VM server is 2.2 and the guest is OEL 5.4 installed from media, not from a pre-built template, both are 64-bits.

    Hi, I have no idea of what can be the reason for your sudden console blackout...
    What I can say is that here on my side, SUDDENLY, after a few random reboots (and without touching anything else!), I'm not experiencing the system-console error messages flood anymore (pls see my last post, sorry I'm a bit in a hurry and I'm not able to put in the link).
    I have a different error now, just one, after that it looks like it started to function "by itself".
    I'm starting to think OVM 2.2 has major problems with networking, and I have the feeling they are related to the new bridge "xenbr0:0" that has been probably created for putting one more layer of abstraction regarding the Server Pool Master (has it been designed like this to make possible automatic migration of VM Guests that used to be running on a failed Server Pool Master? Who knows... On 2.1.5, in that scenario, HA wouldn't have been of help, and no automatic restore of any VM Guest would have happened).
    What I can say after a few days of tests is I dont' trust this system, thinking to steadily go back to 2.1.5...
    I'm maybe doing something wrong too, but this is the feeling. I have also several more minor issues too. Uhm.

  • Unable to login on Mac Pro Server (ML)

    Hi,
    perhaps a small introduction to my problem;
    We use a Mac Pro (with ML Server) as our main server and have about 5 users configured on it. They all use iMacs execpt for one user, who uses a MacBook Pro. The (brand new) server was configured about 3 months ago using the Server App. The services that were configured include DNS, iCal, File Services, Open Directory, and that's about it. On the server itself a local user (with Admin rights) was configured, all the other users were local network users.
    Now, the MacBook Pro user had to be configured as a mobile user (in order to login to his MBP with his network credentials but outside the local network). We tried to do this from his MBP, and that's where we a first error (Seemed the user could not mount the ('null') home directory). So, we played around in the Server App with the File Services. We managed to get the mobile user account to work, however, it now seemed that all the users had their home directories on their local hard drive (not on the Mac Pro server anymore). Then, we tried to undo our changes... And that's when the server became irresponsive. We tried to reboot the Mac Pro server, and now, we can not even log in to the Mac Pro server anymore. It seems that "some error occured" which does not allow us to login to the system. This error pops up with ALL the users, including the local user with Admin rights...
    How does one continue now... ? Is there a possibility to get back the user data (if not, not a big deal, since the system was merely setup anyway) ?
    Best regards,
    Salva

    First.. there is no reason data stored on the server would be lost just because users accounts arent working.
    Network logins are depdendent on Open Directory and OD is very dependent on both the client and the server's DNS resolution.
    You can login locally in the server with the admin account, correct?
    If so, open Terminal and paste this:
         dscl . -list /Users
    If it responds with a list of users, then we know at least your open directory service is online.
    You need to check your logs.
    use Console to review
    /var/log/system.log
    /var/log/opendirectory.log
    What is the result of:
    sudo changeip -checkhostname
    Hope you don't mind if I ask.. but do you really need network homes?
    Its adds much more overhead.  I see new administrators set it up because its 'in the manual', when they really don't need it.

  • Unable to login to our FTP server

    I'm using Contribute 3 and for some reason I'm unable to access our website to do some editing. When I login to the FTP server for connection to our website, the message I receive is that the FTP username or password is incorrect. However, I updated some data in December last without any difficulty. I'm not very computer literate but am curious to know if a change in our IP address is creating this problem. It looks to me that our IP address has changed (not sure how!) I would much appreciate if anyone has any suggestions how I resolve this.
    Maria

    Contribute does remember the IP address. If your's has changed, you will need a new key.

  • Unable to login to Sun ONE Server Console 5.2 on XP

    I've installed 5.2 on my new Win XP Dell Inspiron 5150. Both the admin52-serv and slapd services are started and netstat shows the ports listening. When I attempt to login to the console I get an HTTP Response Timeout error, yet there's nothing logged to the error log.
    I've verified that the firewall is disabled, I can ping the laptop from any other machine on the network.
    Anybody have any ideas?
    TIA,
    Todd

    yes, here's the access log
    [15/Mar/2004:14:59:43 -0500] conn=0 op=-1 msgId=-1 - fd=1332 slot=1332 LDAP connection from 10.88.28.97 to 10.88.28.97
    [15/Mar/2004:14:59:43 -0500] conn=0 op=0 msgId=1 - BIND dn="cn=admin-serv-lupo, cn=Administration Server, cn=Server Group, cn=lupo.chordiant.com, ou=chordiant.com, o=NetscapeRoot" method=128 version=2
    [15/Mar/2004:14:59:43 -0500] conn=0 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn="cn=admin-serv-lupo,cn=administration server,cn=server group,cn=lupo.chordiant.com,ou=chordiant.com,o=netscaperoot"
    [15/Mar/2004:14:59:43 -0500] conn=1 op=-1 msgId=-1 - fd=1288 slot=1288 LDAP connection from 10.88.28.97 to 10.88.28.97
    [15/Mar/2004:14:59:43 -0500] conn=1 op=0 msgId=1 - BIND dn="cn=admin-serv-lupo, cn=Administration Server, cn=Server Group, cn=lupo.chordiant.com, ou=chordiant.com, o=NetscapeRoot" method=128 version=2
    [15/Mar/2004:14:59:43 -0500] conn=1 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn="cn=admin-serv-lupo,cn=administration server,cn=server group,cn=lupo.chordiant.com,ou=chordiant.com,o=netscaperoot"
    [15/Mar/2004:14:59:43 -0500] conn=1 op=1 msgId=2 - SRCH base="cn=configuration,cn=admin-serv-lupo,cn=administration server,cn=server group,cn=lupo.chordiant.com,ou=chordiant.com,o=netscaperoot" scope=0 filter="(objectClass=nsDirectoryInfo)" attrs=ALL
    [15/Mar/2004:14:59:43 -0500] conn=1 op=1 msgId=2 - RESULT err=0 tag=101 nentries=1 etime=0
    [15/Mar/2004:14:59:43 -0500] conn=1 op=2 msgId=3 - SRCH base="cn=server group,cn=lupo.chordiant.com,ou=chordiant.com,o=netscaperoot" scope=0 filter="(objectClass=nsDirectoryInfo)" attrs=ALL
    [15/Mar/2004:14:59:43 -0500] conn=1 op=2 msgId=3 - RESULT err=0 tag=101 nentries=1 etime=0
    [15/Mar/2004:14:59:43 -0500] conn=1 op=3 msgId=4 - SRCH base="cn=userdirectory,ou=global preferences,ou=chordiant.com,o=netscaperoot" scope=0 filter="(objectClass=nsDirectoryInfo)" attrs=ALL
    [15/Mar/2004:14:59:43 -0500] conn=1 op=3 msgId=4 - RESULT err=0 tag=101 nentries=1 etime=0
    [15/Mar/2004:14:59:43 -0500] conn=1 op=4 msgId=5 - UNBIND
    [15/Mar/2004:14:59:43 -0500] conn=1 op=4 msgId=-1 - closing - U1
    [15/Mar/2004:14:59:43 -0500] conn=2 op=-1 msgId=-1 - fd=1268 slot=1268 LDAP connection from 10.88.28.97 to 10.88.28.97
    [15/Mar/2004:14:59:43 -0500] conn=1 op=-1 msgId=-1 - closed.
    [15/Mar/2004:14:59:43 -0500] conn=2 op=0 msgId=1 - BIND dn="cn=admin-serv-lupo, cn=Administration Server, cn=Server Group, cn=lupo.chordiant.com, ou=chordiant.com, o=NetscapeRoot" method=128 version=3
    [15/Mar/2004:14:59:43 -0500] conn=2 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn="cn=admin-serv-lupo,cn=administration server,cn=server group,cn=lupo.chordiant.com,ou=chordiant.com,o=netscaperoot"
    [15/Mar/2004:14:59:43 -0500] conn=2 op=1 msgId=2 - SRCH base="cn=admin-serv-lupo,cn=administration server,cn=server group,cn=lupo.chordiant.com,ou=chordiant.com,o=netscaperoot" scope=2 filter="(nsExecRef=*)" attrs="nsExecRef nsLogSuppress"
    [15/Mar/2004:14:59:43 -0500] conn=2 op=1 msgId=2 - RESULT err=0 tag=101 nentries=20 etime=0
    [15/Mar/2004:14:59:43 -0500] conn=3 op=-1 msgId=-1 - fd=1296 slot=1296 LDAP connection from 10.88.28.97 to 10.88.28.97
    [15/Mar/2004:14:59:43 -0500] conn=3 op=0 msgId=1 - BIND dn="cn=admin-serv-lupo, cn=Administration Server, cn=Server Group, cn=lupo.chordiant.com, ou=chordiant.com, o=NetscapeRoot" method=128 version=2
    [15/Mar/2004:14:59:43 -0500] conn=3 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn="cn=admin-serv-lupo,cn=administration server,cn=server group,cn=lupo.chordiant.com,ou=chordiant.com,o=netscaperoot"
    [15/Mar/2004:14:59:43 -0500] conn=3 op=1 msgId=2 - SRCH base="cn=server group,cn=lupo.chordiant.com,ou=chordiant.com,o=netscaperoot" scope=2 filter="(objectClass=*)" attrs=ALL
    [15/Mar/2004:14:59:43 -0500] conn=3 op=1 msgId=2 - RESULT err=0 tag=101 nentries=53 etime=0
    [15/Mar/2004:14:59:43 -0500] conn=3 op=2 msgId=3 - UNBIND
    [15/Mar/2004:14:59:43 -0500] conn=3 op=2 msgId=-1 - closing - U1
    [15/Mar/2004:14:59:43 -0500] conn=4 op=-1 msgId=-1 - fd=1252 slot=1252 LDAP connection from 10.88.28.97 to 10.88.28.97
    [15/Mar/2004:14:59:43 -0500] conn=3 op=-1 msgId=-1 - closed.
    [15/Mar/2004:14:59:43 -0500] conn=4 op=0 msgId=1 - BIND dn="cn=admin-serv-lupo, cn=Administration Server, cn=Server Group, cn=lupo.chordiant.com, ou=chordiant.com, o=NetscapeRoot" method=128 version=2
    [15/Mar/2004:14:59:43 -0500] conn=4 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn="cn=admin-serv-lupo,cn=administration server,cn=server group,cn=lupo.chordiant.com,ou=chordiant.com,o=netscaperoot"
    [15/Mar/2004:14:59:43 -0500] conn=4 op=1 msgId=2 - SRCH base="cn=slapd-lupo,cn=sun one directory server,cn=server group,cn=lupo.chordiant.com,ou=chordiant.com,o=netscaperoot" scope=2 filter="(objectClass=*)" attrs=ALL
    [15/Mar/2004:14:59:43 -0500] conn=4 op=1 msgId=2 - RESULT err=0 tag=101 nentries=18 etime=0
    [15/Mar/2004:14:59:43 -0500] conn=5 op=-1 msgId=-1 - fd=1300 slot=1300 LDAP connection from 10.88.28.97 to 10.88.28.97
    [15/Mar/2004:14:59:43 -0500] conn=5 op=0 msgId=1 - BIND dn="cn=admin-serv-lupo, cn=Administration Server, cn=Server Group, cn=lupo.chordiant.com, ou=chordiant.com, o=NetscapeRoot" method=128 version=2
    [15/Mar/2004:14:59:43 -0500] conn=5 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn="cn=admin-serv-lupo,cn=administration server,cn=server group,cn=lupo.chordiant.com,ou=chordiant.com,o=netscaperoot"
    [15/Mar/2004:14:59:43 -0500] conn=5 op=1 msgId=2 - SRCH base="cn=admin-serv-lupo,cn=administration server,cn=server group,cn=lupo.chordiant.com,ou=chordiant.com,o=netscaperoot" scope=2 filter="(objectClass=*)" attrs=ALL
    [15/Mar/2004:14:59:43 -0500] conn=5 op=1 msgId=2 - RESULT err=0 tag=101 nentries=26 etime=0
    [15/Mar/2004:14:59:43 -0500] conn=6 op=-1 msgId=-1 - fd=1232 slot=1232 LDAP connection from 10.88.28.97 to 10.88.28.97
    [15/Mar/2004:14:59:43 -0500] conn=6 op=0 msgId=1 - BIND dn="cn=admin-serv-lupo, cn=Administration Server, cn=Server Group, cn=lupo.chordiant.com, ou=chordiant.com, o=NetscapeRoot" method=128 version=2
    [15/Mar/2004:14:59:43 -0500] conn=6 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn="cn=admin-serv-lupo,cn=administration server,cn=server group,cn=lupo.chordiant.com,ou=chordiant.com,o=netscaperoot"
    [15/Mar/2004:14:59:43 -0500] conn=6 op=1 msgId=2 - SRCH base="cn=server group,cn=lupo.chordiant.com,ou=chordiant.com,o=netscaperoot" scope=2 filter="(objectClass=*)" attrs=ALL
    [15/Mar/2004:14:59:43 -0500] conn=6 op=1 msgId=2 - RESULT err=0 tag=101 nentries=53 etime=0
    [15/Mar/2004:14:59:43 -0500] conn=6 op=2 msgId=3 - UNBIND
    [15/Mar/2004:14:59:43 -0500] conn=6 op=2 msgId=-1 - closing - U1
    [15/Mar/2004:14:59:43 -0500] conn=2 op=2 msgId=3 - SRCH base="cn=admin-serv-lupo,cn=administration server,cn=server group,cn=lupo.chordiant.com,ou=chordiant.com,o=netscaperoot" scope=2 filter="(nsExecRef=java:*)" attrs="nsExecRef cn"
    [15/Mar/2004:14:59:43 -0500] conn=2 op=2 msgId=3 - RESULT err=0 tag=101 nentries=0 etime=0
    [15/Mar/2004:14:59:43 -0500] conn=2 op=3 msgId=4 - SRCH base="cn=slapd-lupo,cn=sun one directory server,cn=server group,cn=lupo.chordiant.com,ou=chordiant.com,o=netscaperoot" scope=2 filter="(nsExecRef=java:*)" attrs="nsExecRef cn"
    [15/Mar/2004:14:59:43 -0500] conn=2 op=3 msgId=4 - RESULT err=0 tag=101 nentries=0 etime=0
    [15/Mar/2004:14:59:43 -0500] conn=2 op=4 msgId=5 - SRCH base="cn=sun one directory server,cn=server group,cn=lupo.chordiant.com,ou=chordiant.com,o=netscaperoot" scope=2 filter="(nsExecRef=java:*)" attrs="nsExecRef cn"
    [15/Mar/2004:14:59:43 -0500] conn=2 op=4 msgId=5 - RESULT err=0 tag=101 nentries=0 etime=0
    [15/Mar/2004:14:59:43 -0500] conn=2 op=5 msgId=6 - SRCH base="cn=administration server,cn=server group,cn=lupo.chordiant.com,ou=chordiant.com,o=netscaperoot" scope=2 filter="(nsExecRef=java:*)" attrs="nsExecRef cn"
    [15/Mar/2004:14:59:43 -0500] conn=2 op=5 msgId=6 - RESULT err=0 tag=101 nentries=0 etime=0
    [15/Mar/2004:14:59:43 -0500] conn=2 op=6 msgId=7 - UNBIND
    [15/Mar/2004:14:59:43 -0500] conn=2 op=6 msgId=-1 - closing - U1
    [15/Mar/2004:14:59:43 -0500] conn=0 op=1 msgId=2 - UNBIND
    [15/Mar/2004:14:59:43 -0500] conn=0 op=1 msgId=-1 - closing - U1
    [15/Mar/2004:14:59:44 -0500] conn=7 op=-1 msgId=-1 - fd=1216 slot=1216 LDAP connection from 10.88.28.97 to 10.88.28.97
    [15/Mar/2004:14:59:44 -0500] conn=6 op=-1 msgId=-1 - closed.
    [15/Mar/2004:14:59:44 -0500] conn=2 op=-1 msgId=-1 - closed.
    [15/Mar/2004:14:59:44 -0500] conn=0 op=-1 msgId=-1 - closed.
    [15/Mar/2004:14:59:44 -0500] conn=7 op=0 msgId=1 - BIND dn="cn=admin-serv-lupo, cn=Administration Server, cn=Server Group, cn=lupo.chordiant.com, ou=chordiant.com, o=NetscapeRoot" method=128 version=2
    [15/Mar/2004:14:59:44 -0500] conn=7 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn="cn=admin-serv-lupo,cn=administration server,cn=server group,cn=lupo.chordiant.com,ou=chordiant.com,o=netscaperoot"
    [15/Mar/2004:14:59:44 -0500] conn=8 op=-1 msgId=-1 - fd=1340 slot=1340 LDAP connection from 10.88.28.97 to 10.88.28.97
    [15/Mar/2004:14:59:44 -0500] conn=8 op=0 msgId=1 - BIND dn="cn=admin-serv-lupo, cn=Administration Server, cn=Server Group, cn=lupo.chordiant.com, ou=chordiant.com, o=NetscapeRoot" method=128 version=2
    [15/Mar/2004:14:59:44 -0500] conn=8 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn="cn=admin-serv-lupo,cn=administration server,cn=server group,cn=lupo.chordiant.com,ou=chordiant.com,o=netscaperoot"
    [15/Mar/2004:14:59:44 -0500] conn=9 op=-1 msgId=-1 - fd=1276 slot=1276 LDAP connection from 10.88.28.97 to 10.88.28.97
    [15/Mar/2004:14:59:44 -0500] conn=9 op=0 msgId=1 - BIND dn="cn=admin-serv-lupo, cn=Administration Server, cn=Server Group, cn=lupo.chordiant.com, ou=chordiant.com, o=NetscapeRoot" method=128 version=2
    [15/Mar/2004:14:59:44 -0500] conn=9 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn="cn=admin-serv-lupo,cn=administration server,cn=server group,cn=lupo.chordiant.com,ou=chordiant.com,o=netscaperoot"
    [15/Mar/2004:14:59:44 -0500] conn=9 op=1 msgId=2 - SRCH base="cn=admin-serv-lupo,cn=administration server,cn=server group,cn=lupo.chordiant.com,ou=chordiant.com,o=netscaperoot" scope=2 filter="(objectClass=*)" attrs=ALL
    [15/Mar/2004:14:59:44 -0500] conn=9 op=1 msgId=2 - RESULT err=0 tag=101 nentries=26 etime=0
    [15/Mar/2004:14:59:44 -0500] conn=8 op=1 msgId=2 - UNBIND
    [15/Mar/2004:14:59:44 -0500] conn=8 op=1 msgId=-1 - closing - U1
    [15/Mar/2004:14:59:45 -0500] conn=8 op=-1 msgId=-1 - closed.

  • Unable to login on console after RADIUS configuration on switch.

    I'm having some problems logging on to a switch via console after applying RADIUS-config.
    When using telnet I can log on.
    But when trying to log on via console I'm getting:
    User Access Verification
    Username: xxx
    Password: xxx
    % Authentication failed
    What I want to acheive here is to use radius for telnet & ssh, and the local user account for console.
    What am I missing here?
    Here's my aaa config.
    aaa authentication login default group radius local
    aaa authentication enable default group radius enable
    aaa authorization console
    aaa authorization exec default group radius local
    Thanks!

    Sorry, I was too fast. Cut and paste error from my notes. Anyway, the basics are when you want to enable AAA on IOS, but for console access you want to use the local database then you need to do following steps:
    1. Define local usernames: username xxx password yyy
    2. Configure aaa new-model
    3. Configure a named AAA authentication list: aaa authentication login LIST local
    4. Attach the named AAA authentication list to the console line: login authentication LIST
    If you want to use the local database only as fallback in case the aaa servers are not responding you use: aaa authentication login LIST group radius local 
    In above example no_radius is your LIST name. So, if you remove the password from the line con 0, and change aaa authentication login no_radius enable to aaa authentication login no_radius local, and attach this one to your line con 0, you will be using the local database for line con 0. The default list is still used on tty, vty and aux.
    If you use aaa authentication login no_radius group radius local instead of aaa authentication login no_radius local you are using the local database as a fallback.
    Kind regards
    (Sorry, not able to test this at this time so this is purely theory from my notes)

  • Unable to login to console

    I am not able to login to the console, ctrl+alt+del does nothing, use RDP to login, connect to event viewer, computer management, or hyper-v manager from remote PC. These servers are Hyper-V host with 2 VM's that have No Issues, I
    can use RDP to connect to and access shared files. I have 2 servers setup the same way and both have the same problem was working fine yesterday. I have not done any updates or made any changes to the host for some time.

    Something should change. Do not believe in miracles. This is not likely situation that the computer lives its own secret life.
    Hope you find more detailed to discuss.
    Rgds

  • Unable to login to Mobile Console

    Hi,
    Not sure why but we are unable to login to the Mobile Server console. I'm positive that I am entering the correct password. However, the message we receive
    is Please verify your username, password, url and try again!
    Not sure how to troubleshoot this. Anyone have ideas? This worked fine this morning.
    Thanks
    Bill

    a) stop the glassfish server from the Windows Services
    b) start glassfish server using
                   C:\app\DMS\Mobile\Server\bin\runmobileserver.bat

  • Unable to login to design console

    I am unable to login to Design Console. I am getting the following error.
    Error Keyword: DAE.CLIENT_NOT_BOUND
    Description: Database client has not bound to the server-side database object. Either the client database object has never bound to the server-side database object, or the server-side database object is no longer accessible.
    Remedy: Attempt to login again. If this fails, contact your system adminstrator.
    Action: E
    Severity: H
    Help URL:
    Detail:

    Open the xlconfig.xml and check for Application URL etc .. whether they are pointing to the correct server or not and make sure server is running .
    Thanks
    Suren

  • I am unable to login from my login page after I restarted my mini mac running snow leopard 10.6 server. I am a new user. Need help

    I am unable to login from my login page after I restarted my mini mac running snow leopard 10.6 server. I am a new user. Need help

    Try clearing your cache, [https://support.mozilla.org/en-US/kb/How to clear the cache Instructions here]. Then, try going to [https://accounts.google.com Google Accounts]. If there is currently an account singed in, sign out, then back in. After that, try going to Google Adwords.

  • Can not log into server computer with any accounts - "You are unable to login to the user account "abcdefg" at this time. Logging in to the account failed because an error occurred."

    I have a Mac mini running the latest version of OS X and Server. Been running fine and flawlessly. However, I had a strange problem with the iCloud preferences panel crashing when I tried to access it, so I rebooted. Now I can not log into the system with any accounts. My master admin account (along with all the others) gives me the error:
    You are unable to login to the user account "abcdefg" at this time. Logging in to the account failed because an error occurred."
    I am able to see the server from other macs and I can log into it using the same account, but it only shows me a few of the shared folders I have access to but NOT to my main directories.
    Rebooting into Command-R and doing a disk utility, I try and repair permission on that drive and get a bunch of errors like:
    ACL found but not expected on Users
    Repaired "Users"
    ACL found but not expected on Users/.localized
    Repaired "Users/.localized"
    ACL found but not expected on Users/Shared
    Repaired "Users/shared"
    ACL found but not expected on Users/Shared/.localized
    Repaired "Users/Shared/.localized"
    Permissions repair complete.
    But rebooting is no joy...same problem. Any idea what is going on or how to repair it? Should I do a time machine restore? Complete new OS X install? Any idea what is causing this or how to salvage it?

    Got everything to re-install and it worked fine...for a few hours. Then I came in to find ALL of my network users deleted. Just GONE. Then found out the Open Directory was trashed and was unable to open, recover or restore from a backup. Looks like I may have a bad drive here.
    I installed a new drive in the system, re-installed and so far (for a couple of hours anyway) the system seems to be working and stable.

  • Unable to login to Web console through xelsysadm.

    Hi All,
    I am unable to login to the web console through xelsysadm.It doesn't show any error message, but the process bar goes on for some time and then shows the session is expired. I have a delegated admin with 5 users.
    The users present in this group are able to login with in second span of time.But Xelsysadm is unable to login.
    Can any one help me on this.
    Thanks in Advance.

    Both the field has a value 0 in database. when I enter the credintials and submit it, the status bar goes on for a long time and its not enterning into web console.the login page appears for long period with status bar progressing and it even stay in that state for 24hrs with out logging in.
    But wen I use delegate admin, he is able to login with in seconds of time.

  • The WSUS administration console was unable to connect to the WSUS Server via the remote API. (Server 2k8)

    I have installed a new server for WSUS on Server 2k8, This is a stand alone server on Internet No client system is connected on this server as I have to copy these updates to my LAN which never connects to internet. (Previously I was using server 2k3. for
    online & server 2008 on my LAN , now I have changed the server for Online)
    Wsus has finished the synchronization & downloaded updates of around 67GB & its downloading more updates. The server shows me some updates are waiting to approved. but when I click the link for those updates I get following error message.
    error code is as follows -
    The WSUS administration console was unable to connect to the WSUS Server via the remote API.
    Verify that the Update Services service, IIS and SQL are running on the server. If the problem persists, try restarting IIS, SQL, and the Update Services Service.
    System.Net.WebException -- The operation has timed out
    Source
    System.Web.Services
    Stack Trace:
       at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request)
       at System.Web.Services.Protocols.HttpWebClientProtocol.GetWebResponse(WebRequest request)
       at Microsoft.UpdateServices.Internal.DatabaseAccess.ApiRemotingCompressionProxy.GetWebResponse(WebRequest webRequest)
       at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
       at Microsoft.UpdateServices.Internal.ApiRemoting.ExecuteSPSearchUpdates(String updateScopeXml, String preferredCulture, Int32 publicationState)
       at Microsoft.UpdateServices.Internal.DatabaseAccess.AdminDataAccessProxy.ExecuteSPSearchUpdates(String updateScopeXml, String preferredCulture, ExtendedPublicationState publicationState)
       at Microsoft.UpdateServices.Internal.BaseApi.Update.SearchUpdates(UpdateScope searchScope, ExtendedPublicationState publicationState, UpdateServer updateServer)
       at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.GetUpdates(UpdateScope searchScope)
       at Microsoft.UpdateServices.UI.AdminApiAccess.UpdateManager.GetUpdates(ExtendedUpdateScope filter)
       at Microsoft.UpdateServices.UI.AdminApiAccess.BulkUpdatePropertiesCache.GetAndCacheUpdates(ExtendedUpdateScope updateScope, ComputerTargetScope computerTargetScope)
       at Microsoft.UpdateServices.UI.SnapIn.Pages.UpdatesListPage.GetListRows()
    I Have tried desabling the firewall,disabling the antivirus protection. Tried by changing the default rule Please Help.

    Hi Sagar,
    First, please check if the RAM is exhausted. When there is not enough RAM, this issue may occurs.
    Please try to run iisreset on the WSUS server, then try to reconnect.
    Also, please try to run the server cleanup wizard to remove the unused update.
    Best Regards.
    Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • I am unable to login to use FaceTime.  I keep getting the error "The server encountered an error processing registration.  Please try again later."

    I am unable to login in to use FaceTime.  After signing in to my apple account, I get the error message " The server encountered an error processing registration.  Please try again later."

    Thank you for getting back to me so quickly. The RSS feed is http://www.lifeinnortheastohio.com/the-panel-scanners/rss.xml

Maybe you are looking for

  • Exporting and importing just table definitions

    Hi, I have this production database that has a huge amount of data in it. I was asked to set up a test database based on the exact same schema as the live database. When I tried to do an export (from live) and import (to test), with the parameters ro

  • Scheduling Report through InfoView - Destination Email

    My question pertains to InfoView in Crystal Report Server 2008.  I am trying to set up a scheduled report to run once, and be emailed as a pdf to my own email address.  I am using the administrator account and can successfully do this through the CMC

  • How to configure ALE/IDOC in  nace for V3.

    Hi, Please let me  know how to configure ALE/IDOC output type in Nace and how to configure the message outputs.         I require the steps to configure the above.          Screen shots will also be helpful. Regards,

  • I need to build a check-in form

    I am creating an app for a local club where members have to check in when they enter. I have all the membership data in an oracle express db. The forms' basic specs are: The Check-in Form will accept membership tag information. Upon entry of bar code

  • Encoding in jsp

    I am Using <meta http-equiv="Content-Type" content="text/html;charset=UTF-8" > for encoding charset. It accepts [insert and retrieval] all german and french characters except � (alt+0128) .. And also i tried <%@page pageEncoding="UTF-8" contentType="