Unable to login to ISE 1.2 via Cli

Hi,
I have a weird problem; after changing the default admin password on cli and rebooting the unit; i am no longer able to login via cli. Instead I get the following message:
% Error: Unable to launch ADE-OS shell. Disk full.
The ISE is running 1.2 with patch 3 installed.
If I try to access via web, it is running normally. I was wondering if anyone encounter such issue and any suggestions on how to fix it?
Any suggestion is appreciated.
Thanks.

Hi ,
you may be probably hitting one of these two defects.
CSCuj52520 or
CSCuj97832.
There are workarounds for these two defects and initially we need to know if it is the problem due to Admin user previleges corruption or issue with MNT DB growing in size and occupying the entire tablespace.
I suspect this could be a Admin privilege corruption and can be fixed with Rescue ISO image.
Can you please raise SR with TAC who can provide you with Rescue ISO image and help you in implementing the workaround.

Similar Messages

Unable to login to Blackberry ID via smartphone

I got my new phone just before Christmas and set it up on Vodafone however, ported my old phone number to my new vodafone contract shortly afterwards. Ever since then I have been unable to login to my BB ID account via my phone. I have tried resetting my password (via my laptop) but still no joy. I get a message saying 'enter the user name associated with this smartphone'. I only have the one private email address and was able to login prior to the porting of my number. Everything else works perfectly, but I am at a total loss with this one. Can anyone help me please???

Same problem and tried all solutions that I found on internet. NO WAY OUT.
Additionally, now I have to spend a lot of time to get what I need from Blackberry. Don't remember how many time I have to register for something from Blackberry. A Blackberry ID, a sign-in to support forum of Blackberry and a lot sign-in to other support forum to ask for a solution to solve my BB problems.
My first BB was in 2007 and it was great. Now I hate my BB 9930.

Unable to Login to SUP 1.5.5 via iPhone

Am using SUP 1.5.5 and am able to connect to there server and unable to login. can anyone help us to sort out what could be an issue.

Hi ,
you may be probably hitting one of these two defects.
CSCuj52520 or
CSCuj97832.
There are workarounds for these two defects and initially we need to know if it is the problem due to Admin user previleges corruption or issue with MNT DB growing in size and occupying the entire tablespace.
I suspect this could be a Admin privilege corruption and can be fixed with Rescue ISO image.
Can you please raise SR with TAC who can provide you with Rescue ISO image and help you in implementing the workaround.

Suddenly unable to login via console

I restarted my guest that's been running fine for a few days, and suddenly I am unable to login thru the java browser-based console thru the VM Manager.
Everything about the console looks fine: It shows me all the usual startup messages if I open it while the VM guest is booting, it prompts me for the login username and password but instantly returns to the "TestVMHost login:" prompt after entering the correct password. It does this for all three plain users and root that I have established in this VM guest.
I can SSH into the VM guest just fine with PuTTY over the network and login with any valid username/password, so I am not locked out of access to the VM guest. It's just the java-browser console app itself that suddenly stopped letting me login.
Any ideas?
PS: the VM server is 2.2 and the guest is OEL 5.4 installed from media, not from a pre-built template, both are 64-bits.

Hi, I have no idea of what can be the reason for your sudden console blackout...
What I can say is that here on my side, SUDDENLY, after a few random reboots (and without touching anything else!), I'm not experiencing the system-console error messages flood anymore (pls see my last post, sorry I'm a bit in a hurry and I'm not able to put in the link).
I have a different error now, just one, after that it looks like it started to function "by itself".
I'm starting to think OVM 2.2 has major problems with networking, and I have the feeling they are related to the new bridge "xenbr0:0" that has been probably created for putting one more layer of abstraction regarding the Server Pool Master (has it been designed like this to make possible automatic migration of VM Guests that used to be running on a failed Server Pool Master? Who knows... On 2.1.5, in that scenario, HA wouldn't have been of help, and no automatic restore of any VM Guest would have happened).
What I can say after a few days of tests is I dont' trust this system, thinking to steadily go back to 2.1.5...
I'm maybe doing something wrong too, but this is the feeling. I have also several more minor issues too. Uhm.

Unknown SID Error Message/Unable To Login to VM Manager

Hello,
I have installed VM Server and VM Manager on the latest Virtual Box install for Windows 7.
When I attempt to login into the VM Manager (ID: ovm , Default Password: Welcome1) - I get
the error message:
"... [APP: ovm_console] An incorrect username or password was specified. ...."
I selected all default passwords and database config values during installation (e.g., SID=XE).
(Note: I am able to login to VM Manager GNOME desktop but I am unable to log into the VM Manager UI.
I can log in as root in a Xterm window and the ovm Welcome1 password allows me into the GNOME environment. )
The critical error message in the AdminServer.log IS an unknown 'SID' message (even though the default SID=XE was selected):
"ORA-12505, TNS:listener does not currently know of SID given in connect descriptor"
I reviewed the responses to the "Unable to Login to VM Manager" thread so I decided to try the recommended response (unlocking ovs oracle password) even though the logs responses were different in certain areas. I logged in as Oracle with the correct user env and attempted to start the XE database via sqlplus sys user and startup command. I was unable to start the database due to the below error message:
2012-11-23 14:13:46.210
18 Oracle Instance Startup operation failed. Another process may be attempting to startup or shutdown this Instance.
19 Failed to acquire instance startup/shutdown serialization primitive
~
Shutdown abort also did not get rid of this message. Symptons suggest there is a lock not being released (e.g., primitive file that needs to be cleaned up/removed.) I did remove oracle *.lck files from /tmp directory but this did not help either. The ps -elf output also reveals there are no oracle pmon processes running.
If anybody has additional information on this matter - it would be greatly appreciated.
SUMMARY/EXCERPT OF AdminServer.log AND AdminServer-diagnostic.log
The AdminServer.log squawks an "ORA-12505, TNS:listener does not currently know of SID given in connect descriptor"
<> <> <1353697919018> <WL-001129> <Received exception while creating connection for pool "OVMDS": Listener refused the connection with the following error:
198 ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
199 >
200 ####<Nov 23, 2012 11:11:59 AM PST> <Info> <JDBC> <mjcmanager.example.com> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1353697919019> <WL-001156> <Stack trace associated with message 001129 follows:
201
202 java.sql.SQLException: Listener refused the connection with the following error:
203 ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
204
205 at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:443)
206 at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:670)
The critical AdminServer-diagnostic.log error messages are:
AdminServer-diagnostic.log:[2012-11-23T11:17:51.872-08:00] [AdminServer] [ERROR] [] [com.oracle.ovm.mgr.faces.backing.Login] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 79deca6682202612:4258bdee:13b2eaec5e4:-8000-0000000000000099,0] [APP: ovm_console] An incorrect username or password was specified. [Security:090304]Authentication Failed: User ovm javax.security.auth.login.FailedLoginException: [Security:090302]Authentication Failed: User ovm denied
69 AdminServer-diagnostic.log:[2012-11-23T09:09:27.835-08:00] [AdminServer] [ERROR] [] [oracle.help.web.rich.converter.RichTopicConverter] [tid: [ACTIVE].ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 79deca6682202612:16d2c063:13b250c1b7c:-8000-0000000000000147,0] [APP: ovm_help] /u01/app/oracle/ovm-manager-3/machine1/base_adf_domain/servers/AdminServer/tmp/_WL_user/ovm_help/33se2m/war/helpsets/ovmHelp/qstart.html (No such file or directory)
70 AdminServer-diagnostic.log:[2012-11-23T11:16:32.629-08:00] [AdminServer] [ERROR] [] [com.oracle.ovm.mgr.faces.backing.Login] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 79deca6682202612:4258bdee:13b2eaec5e4:-8000-0000000000000079,0] [APP: ovm_console] An incorrect username or password was specified. [Security:090304]Authentication Failed: User ovs javax.security.auth.login.FailedLoginException: [Security:090302]Authentication Failed: User ovs denied
71 AdminServer-diagnostic.log:[2012-11-23T11:16:53.672-08:00] [AdminServer] [ERROR] [] [com.oracle.ovm.mgr.faces.backing.Login] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 79deca6682202612:4258bdee:13b2eaec5e4:-8000-000000000000007f,0] [APP: ovm_console] An incorrect username or password was specified. [Security:090304]Authentication Failed: User ovm javax.security.auth.login.FailedLoginException: [Security:090302]Authentication Failed: User ovm denied
72 AdminServer-diagnostic.log:[2012-11-23T11:17:51.872-08:00] [AdminServer] [ERROR] [] [com.oracle.ovm.mgr.faces.backing.Login] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 79deca6682202612:4258bdee:13b2eaec5e4:-8000-0000000000000099,0] [APP: ovm_console] An incorrect username or password was specified. [Security:090304]Authentication Failed: User ovm javax.security.auth.login.FailedLoginException: [Security:090302]Authentication Failed: User ovm denied
******************************************************************************************

Further investigation reveals the reason why I can't manually start the database as oracle user. The permissions on the oracle directories via the default install are incorrect. Running the command chown -R oracle:dba /u01/app/oracle/ allowed the database to start.. OVS user is now able to login into the XE database.
Now logging in w/ admin user in VM results in the following error message:
" Unexpected error during login (com.oracle.ovm.mgr.api.exception.FailedOperationException: OVMAPI_6000E Internal Error: Connection refused Connection refused Sat Nov 24 11:39:22 PST 2012), please consult logs for details.
I am spending way too much time on this Virtual box install. Any feedback would be appreciated.

Ichat was unable to login to aol instant messenger because...

Hi There
I wiped my hard drive and reinstalled Leopard and all was good. EXCEPT that now I can't log into iChat anymore!
I keep getting this message:
ichat was unable to login to aol instant messenger because your screen name or password was incorrect .
I know that both are correct because I can log into my old iBook and my iMac.
I don't have aol, I use .mac although I don't subscribe, just use it for iChat.
I've deleted the account and started again but always get the same message. I can log in fine using gmail and I used a friends aol and that works but nobody can log into ichat with a .mac screen name.
Help me please.

Ok I also can't log in via adium but if I use my wife's or my mother in-laws sign in then iChat works no problem.
I'm confused because I know my details are correct. Could it have anything to do with the initial set up of the os?

Unable to Silent Monitor newly configured agent via SAD

Unable to silent monitor newly configured agent via SAD (supervisor agent desktop).....attached is a screen shot of the error messages.
I have verified the following -
- agent is able to log in successfully...
- supervisor is able to see the agent via realtime report etc...
- agents that are being monitored successfully, has the same NIC card and are on the same vlan as the new agent...
- I am able to see the new agent extension and mac address under VoIP monitoring device in the CDA (cisco desktop administration)...
Please advise, thanks -

There is a utility in the newer releases of UCCX that is included with CAD on the agent PCs that can help narrow down the cause of this problem. On the agent PC, navigate to C:\Program Files\cisco\desktop\bin and you will see NICQ.exe. Run this utility while the agent is on a call. This utility captures packets on the NIC and verifies that the PC is receiving packets from the phone correctly.
If this tool reports that it cannot find an RTP stream, it's best to focus on the agent PC and their phone configuration. On some phones, you may need to disable the advertise G722 codec, because this is not supported with CAD monitoring/recording yet. Also, even though the MAC address shows up correctly in CDA for their extension, it's important to make sure the extension is only used once in CUCM by searching the route plan report. Otherwise, the VoIP Monitoring service may receive the wrong device's MAC address when trying to filter for the RTP stream.
Make sure the PostInstall tool on the agent PC has the correct NIC selected to capture traffic on. This is important when the agent PC has more than one NIC installed. This utility is also in C:\Program Files\cisco\desktop\bin on the agent PC.
If the phone seems OK but the problem remains, you can isolate it to a PC by connecting the agent's phone to another PC, like the PC of an agent that can be monitored. If the non-working agent can be monitored using their own login to CAD and their own phone on the other agent's PC, then it's just a matter of finding differences between the two PCs that can lead to the problem.
Thanks,
Brendan

Unable to login to MARS GUI

Hi, i am able to login to mars cli using un/pw but unable to login with GUI using the same un/pw. Any ideas?

It is possible you exceeded the failed login account and have locked the account from logging in via the GUI. You should be able to unlock the account from the CLI:
[pnadmin]$ unlock -l
The -l indicates a local user; if you are working in a GC<->LC environment, you may want to use the -b option.
Scott

UNABLE TO LOGIN R12 login page

Hai,
suddenly i was unable to login 12.0.4 login page.when i am trying to access login page the following error encountered.
*500 Internal Server Error*
*java.lang.NoClassDefFoundError at oracle.apps.fnd.sso.AppsLoginRedirect.AppsSetting(AppsLoginRedirect.java:126) at oracle.apps.fnd.sso.AppsLoginRedirect.init(AppsLoginRedirect.java:170) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.loadServlet(HttpApplication.java:2231) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4617) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4541) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.getRequestDispatcher(HttpApplication.java:2821) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:740) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:299) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:187) at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260) at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:230) at oracle.oc4j.network.ServerSocketAcceptHandler.access$800(ServerSocketAcceptHandler.java:33) at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:831) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303) at java.lang.Thread.run(Thread.java:595)*
any one have idea?
Instance detials : 12.0.4 single node which running on linux4.0

i tried to login page with url : http://hostname.domainname:portno/forms/frmservlet. eror throughn out like APP-FND-01542: This Applications Server is not authorized to access this database.
Small changes i have done know like below
in context file s_appserverid_authentication paramter is set OFF.after run autoconfig in appstier
then i able to login with the url like : http://hostname.domainname:portno/forms/frmservlet
This is an expected behavior and it is already exist from 11i (11.5.10) release.
Note: 403397.1 - APP-FND-01542 when logging directly into forms via the f60cgi in 11.5.10
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=403397.1
But i unable to login with url http://hostname.domainname:portno.
Did you review my previous reply?

Lync 2013 Mobile unable to login from wifi

Dear All,
Many thanks in advance.
My Lync 2013 mobile client is unable to login via internal network.
I have tried to provide external web directory and lyncdiscover by giving way through internal leg of reverseproxy(TMG).
I think I'm missing something from the basic. Will appreciate your reply. :)

You are not missing something basic, this is a real issue with using Lync mobile while on internal corpnet. A known feature (issue) with Lync mobile is that has to connect to the external web services. So when internal it will hairpin out your FW and connect
to the web services:
http://technet.microsoft.com/en-us/library/hh690030.aspx
Some more info:
http://blog.schertz.name/2013/07/understanding-lync-2013-mobility/
A lot of Firewalls do not allow this sort of "hairpinning".
Thom Foreman, MCSE, MCSA, MCTS

Unable to login in to Mac App Store using valid account.

I recently inherited a spare MacBook Air from my wife (who got a new one). I deleted her user account, and set up a new admin user account for me. The machine is running 10.7.5.
Now, I am absolutely unable to login to the App Store. I am using my valid Apple ID -- for example, the same Apple ID that I used to gain access to this very forum. System Preferences accepts my ID. iTunes accepts my ID. BUT the App Store will aboslutely NOT respond. It will not load. I get the red "connection failed" alert, and then after several tries it doesn't respond at all.
It doesn't give any option to switch users -- perhaps once the original owner has used the App Store, the computer will never again allow anyone else to use it? It doesn't say that there is another user logged in. There appears to be no way of deleting and reinastalling the App Store. There is no cache file I can find to be cleared. There is no preference option. There is no information. There appears to be no way of fixing this at all, short of wiping the hard drive and reinstalling the operating system. Is that what I have to do? WHY IS THIS SO HORRIBLY DESIGNED? And why is there no support short of the forum? I hate this about Apple (despite being a long-time Apple evangelist and OSX devotee).
Thanks.

The first thing you should do after acquiring a second-hand computer is to erase the internal drive and install a clean copy of OS X. How you do that depends on the model. Look it up on this page to see what version was originally installed.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard installation disc, which you can get from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. I suggest you install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the gray installation discs that came with it. If you don't have the discs, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, it should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
Once booted from the disc or in Internet Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive, which is what you should do.
After partitioning, quit Disk Utility and run the OS X Installer. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
You should then run Software Update and install all available system updates from Apple. If you want to upgrade to a major version of OS X newer than 10.6, buy it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.

I am unable to login from my login page after I restarted my mini mac running snow leopard 10.6 server. I am a new user. Need help

I am unable to login from my login page after I restarted my mini mac running snow leopard 10.6 server. I am a new user. Need help

Try clearing your cache, [https://support.mozilla.org/en-US/kb/How to clear the cache Instructions here]. Then, try going to [https://accounts.google.com Google Accounts]. If there is currently an account singed in, sign out, then back in. After that, try going to Google Adwords.

Unable to Login to Creative Cloud App

Photoshop CC was crashing every time I attempted to open a new file inside of the application (Photoshop would stay open as long as did not attempt to open a file.)
I uninstalled PS CC.
When I attempted to reinstall. I received the following message in the CC app:
"Unknown Server Error: Sign in is currently unavailable. We are unable to access your account. Please try again later."
I ran the CC cleaner, restarted, and reinstalled CC. I am still receiving the message and unable to login.
My password has been reset from the recent security warning, and I am able to login to my Adobe account online, and everything seems to be in order.
I am running on OS X 10.8.5.
HELP, please.

Hi Bethany,
Welcome to the Community!
Try Solution 2 in this link: http://helpx.adobe.com/creative-cloud/kb/unknown-server-error-launching-cc.html, if doesn't work then try others.
Thanks!
Ankit

Issue with cisco acs 4.2.Users unable to login aaa client but after restarting group policy able to login

issue with cisco acs 4.2.Users unable to login aaa client but after restarting group policy able to login

issue with cisco acs 4.2.Users unable to login aaa client but after restarting group policy able to login

Unable to login with Jabber Windows

Hi ,
Am unable to login the Jabber Windows Client. Getting the error as "Unable to Communicate With the Server".
Able to login with CUPS & CUCM end user page. CUCM Integrated with LDAP.
While going through the UP Profile logs seen that "Failed to SOAP login".
Tried with restart of CUCM & CUPS several times but no go.
CUCM Version - 8.6.2
CUPS Version - 8.6.1
Tried with CUPC client result also same.
Thanks in Advance

If credentials work on CCMuser CUPSuser I would suspect either some kind of communication problem between the clients and the servers and/or misconfiguration (user/device/line association, device owner, roles, CTI/CCMCIP profiles, etc) on CUCM/CUPS.
Specially because you mention the same happens with CUPC.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk

Unable to login to ISE 1.2 via Cli

Similar Messages

Maybe you are looking for