Unable to Login to Middleware (Web Console)

Hi all,
I am able to login to the back-end SAP-Gui as well as synchonise with MI client with the created User ID and password having all appropriate authorizations.
But unfortunately i am unable to login to the web console through this user ID and password, it gives the error message "User name or password incorrect".
Kindly help me out.
Regards,
Abhishek

Hi Nameeta,
Thanks for the reply.
I have already given authorisation for the transaction object S_TCODE.
The problem is now solved as i was giving wrong system name.
Thanks everybody.
Regards,
Abhishek

Similar Messages

Unable to login to the web console cisco Prime assurance 9.0 password not working :(

Hi all,
I was able to install the Cisco Prime 9.0 assurance
I am entering the correct username and password still I am not able to login to Web admin page
How do i reset the password and login to the web admin console??
Plz help... urgent...
Rgds,
Rebecca....

Thanks Rob so much
yes i booted the NCS from the DVD and installed the applications
now i have two NCS appliances one is running PI 1.2 and other LMS 4.2

UCCE 9.0(1) - unable to login to CCE Web Admin

Hello,
I am installing UCCE 9.0(1) in my lab and am unable to log into CCE Web Administrator. I thought I needed to log in CCE Web Administrator after installing UCCE to select the type of deployment, so after the intial UCCE installation and before running Web Setup I tried to login to Unified CCE Administration, but no matter which domain user account I use it responds with "Invalid Username and/or Password." I tried both the domain administrator and the domain user account which I used for the install, both of which are members of the setup security group for the new Instance I had created, but neither worked. I then went ahead and installed the Router and Logger nodes as a Rogger and these processes start and run fine but still I cannot login to the CCE Web Administrator. This is in an ESXi VM and I have good snapshots to be able to return to an unconfigured state if necesary. I have searched the UCCE 9.0(1) documentation on CCO but am not finding anything helpful. Can anyone shed any light on what account to use to login to the CCE Web Administrator and when in the install this should be done, or point me to the proper documentation concerning this?
Thanks,
Dale

Hi
Use fully qualified machine name with domain suffix to reach cceadmin page instead of IP, machine name or localhost. For example https://machinename.google.com/cceadmin. This solves the login issue.
If you are not even able to see the domain names in combo box. Check the ICM build number and the version. Do not use version 9.0.2 and be sure the build is 1454.
Worked for me.
Thx.

Unable to login to jive forum console

Hi,
JDEV 11.1.1.7.0
Webcenter Portal 11.1.1.7.
Connection is success under database navigator.
However I am getting the below error when I am trying to login to http://localhost:8890/owc_discussions/admin/login.jsp with weblogic/weblogic1 .
Login failed:make sure your username and password are correct and that you are an admin or moderator.
Also the data source is inplace as below in weblogic.
OWC_DiscussionDS
Generic
jdbc/OWC_DiscussionsDS
AdminServer, WC_Collaboration
I have also made changes like below:-
<?xml version="1.0" encoding="UTF-8"?>


<jive>


<database>
    
    
    
    
    <JNDIProvider>
      <name>jdbc/OWC_DiscussionsDS</name>
    </JNDIProvider>
    <defaultProvider>
      <username>DEV3_DISCUSSIONS</username>
      <maxConnections>25</maxConnections>
      <minConnections>5</minConnections>
      <serverURL>jdbc:oracle:thin:@localhost:1521:XE</serverURL>
      <driver>oracle.jdbc.driver.OracleDriver</driver>
      <connectionTimeout>1.0</connectionTimeout>
      <password>HR</password>
    </defaultProvider>
</database>
<connectionProvider>
    <className>com.jivesoftware.base.database.DefaultConnectionProvider</className>
</connectionProvider>
<cache>
    <Watches>
      <size>2097152</size>
      <maxLifetime>43200000</maxLifetime>
    </Watches>
    <Message>
      <size>5242880</size>
      <maxLifetime>43200000</maxLifetime>
    </Message>
    <Thread>
      <size>5242880</size>
      <maxLifetime>21600000</maxLifetime>
    </Thread>
    <Announcement>
      <size>2097152</size>
      <maxLifetime>43200000</maxLifetime>
    </Announcement>
    <Forum>
      <size>6291456</size>
      <maxLifetime>21600000</maxLifetime>
    </Forum>
    <Category>
      <size>5242880</size>
      <maxLifetime>43200000</maxLifetime>
    </Category>
    <User>
      <size>5242880</size>
      <maxLifetime>21600000</maxLifetime>
    </User>
</cache>
<setup>true</setup>
</jive>
So how do the users reflect to jiveforum?
Thanks,
Animesh

Hi Daniel,
I have installed Webcenter Portal Suite. Version 11.1.1.7
Yes Webcenter Portal and Discussions server are running in the same server.
No I did not try enabling LDAP debugging option of JIVE.
I do not have any external LDAP configured.
My XML looks as below
<jive>

<setup>true</setup>

<database>




<JNDIProvider>
<name>jdbc/OWC_DiscussionsDS</name>
</JNDIProvider>
</database>
<connectionProvider>
<className>com.jivesoftware.base.database.JNDIDataSourceProvider</className>
</connectionProvider>
But still I am unable to log in into http://localhost:8890/owc_discussions/admin/login.jsp with weblogic/weblogic1
Thanks,
Animesh

Unable to login to IC Web Client

Hi All,
I am unable to log in to the IC Web client in CRM 2007. I get the logon screen when I go to
http://<host>.<domain>.<port#>/sap/bc/bsp/sap/crm_ui_frame/default.htm?
but when I enter my CRM user id and password it does not log me in. I can log in to CRM SAP Gui without any issue.
I have activated all the necessary services in SICF.
is there anything i'm missing out please advice?
thanks,
Mike

Hello Mike,
You mention that after you enter your CRM user id and password the system does not log you in. Do you encounter some kind of error message? Do you just see a blank screen? Perhaps you can describe in more detail what exactly happens.
If you are experiencing a blank screen, there are quite a few SAP notes (and quite a few other threads -- in both this IC forum and the new CRM 2007 forum which address this topic). For example, please check:
- SAP note 1144511, Blank screen when starting CRM WebClient or IC WebClient
- SAP note 741939, Blank screen or timeout starting IC WebClient
- SAP note 805806, IC WebClient freezes at startup
- Thread CRM2007 upgrade and IC webclient issue.
- Thread CRM 2007 UI launch Issue
- Thread Re: Blank Page when launching CRM Web UI in CRM 2007
- Thread CRM 2007 UI: Blank screen after selecting the profile
- Thread Blank Screen after selecting a role within the new WebClient User Interface
Warm regards,
John

Unable to login to Web console through xelsysadm.

Hi All,
I am unable to login to the web console through xelsysadm.It doesn't show any error message, but the process bar goes on for some time and then shows the session is expired. I have a delegated admin with 5 users.
The users present in this group are able to login with in second span of time.But Xelsysadm is unable to login.
Can any one help me on this.
Thanks in Advance.

Both the field has a value 0 in database. when I enter the credintials and submit it, the status bar goes on for a long time and its not enterning into web console.the login page appears for long period with status bar progressing and it even stay in that state for 24hrs with out logging in.
But wen I use delegate admin, he is able to login with in seconds of time.

OIM 11G- Web Console- Problem with "Export Deployment Manager File"

Experts,
I am using gogle chrome browser on oim11g setup.
I was able to Import/Export the objects using Import/Export Deployment Manager File.
The reason why I opted for chrome is that I was unable to connect to login to the web console, it was just asking for userid and password and after some time, the browser(Internet Explorer 7) hangs on.
And with FireFox 5.0.1, it is the same thing both import and export deployment manager file windows opens as soon as I click and they just close after 2-3 seconds.
The problem now is after updating the java to "Version 6 Update 26 ", the Export Deployment Manager File stopped working. The window pop-ups and closes in 2 seconds.
But Import Deployment Manager File is working fine with out any problems.
The pop - up blocker is not enabled.
And I am sure that it was working fine earlier with chrome before the java update.When I remove the updated java version, chrome is asking to download the latest java version.
Any suggestions, that helps to work with chrome or firefox or IE?
Edited by: Venu on Aug 11, 2011 4:46 PM
Edited by: Venu on Aug 11, 2011 4:57 PM

Venu,
I have never had any luck getting anything after Version 6 update 23 to export properly. I would remove your updated Java and restore to a previous version of Java.
Sunny Tsang

Problems with Solaris Web Console on Solaris 10 x86

I recently installed Solaris 10 x86 (10/08 release) on a Sun x4450.
I have installed the Jan 14, 2009 patch cluster.
I was having some problems connecting to the Web Console to do some ZFS administration. That's when I installed the patch cluster.
After the patch cluster install I couldn't connect at all. This problem was resolved here: http://forums.sun.com/thread.jspa?threadID=5249136
Now when I login to the Web Console I get a message that says:
"+No application is registered with this Sun Java(TM) Web Console, or you have no rights to use any applications that are registered. See your system administrator for assistance.+"
I'm logging in as root, so it shouldn't be a rights issue.

Quick Solution to the problem you are facing
How to configure ZFS Webconsole Administration
run this command
wcadmin deploy -a zfs -z zfs /usr/share/webconsole/webapps/zfs
you should be able to see & Manage ZFS in Applications area of webconsole.
Enjoy ! Cheers

Java Web Console CAM 6.7.0.12 - Unable to login

I've installed the CAM version 6.7.0.12 installation on a Redhat 5.5 system. The installation went smoothly and I'm able to hit the login page at https://localhost:6789.
I'm attempting to login with the system root account and am having no luck.
I see the following in the systems message log: Oracle Java(TM) Web Console[31794]: Authentication of user root failed
Thanks for any help

CAM 6.7.0 bug fixes. (Windows OS)
Status: RELEASEDPatch Id: 144861-01***********************************************************************
READ THE TERMS OF THE AGREEMENT ("AGREEMENT") IN THE LEGAL_LICENSE.TXT
FILE CAREFULLY BEFORE USING THIS SOFTWARE. BY USING THE SOFTWARE, YOU
AGREE TO THE TERMS OF THIS AGREEMENT. IF YOU DO NOT AGREE TO ALL OF THE
TERMS, PROMPTLY DESTROY THE UNUSED SOFTWARE.
For further information on patching best practices and resources, please
see the Big Admin Patching Center:
http://www.oracle.com/technetwork/systems/patches
***********************************************************************Summary: CAM 6.7.0 bug fixes.Date: Nov/16/2010Installation Requirements:Additional instructions may be listed belowSolaris Release: Note: Microsoft WindowsSun OS Release: Note: WindowsUnbundled Product: Sun StorageTek Common Array Mgr Firmware UpdatesUnbundled Release: 6.7.0Xref: Topic: Relevant Architecture: i386BugId's fixed with this patch:6968739 6972298
Changes incorporated in this version:6968739 6972298
Patches accumulated and obsoleted by this patch:
Patches which conflict with this patch:
Required Patches:
Obsoleted by:
Files Included in this Patch: Note:
sun-cam-scsi.msi
SUNWsefms.msi
SUNWstkcamcd.msi
SUNWstkcamui.msiProblem Description: 6968739 J4410 reporting incorrect chassis serial number.
6972298 Win2k8: Constant errors: libses Property (sun-expander-product-identification) is not defined
Revision History:
141581-01:
Initial Windows patch for CAM 6.7.0 containing Fishwrap 3.7.2-1 bug fixes.
Special Notes:
This patch supplies bug fixes for CAM 6.7.0 Typical 'Full Installation' or Custom
'Management Host' or 'Data Host Proxy Agent' installations. It is not intended to
be used or is it required for 'Administrator Host CLI Client' installations.
Linux RHEL SuSE CAM 6.7.0 Firmware Release for F5100 (LINUX OS)
Status: RELEASEDPatch Id: 145967-01***********************************************************************
READ THE TERMS OF THE AGREEMENT ("AGREEMENT") IN THE LEGAL_LICENSE.TXT
FILE CAREFULLY BEFORE USING THIS SOFTWARE. BY USING THE SOFTWARE, YOU
AGREE TO THE TERMS OF THIS AGREEMENT. IF YOU DO NOT AGREE TO ALL OF THE
TERMS, PROMPTLY DESTROY THE UNUSED SOFTWARE.
For further information on patching best practices and resources, please
see the Big Admin Patching Center:
http://www.oracle.com/technetwork/systems/patches
***********************************************************************Summary: Linux RHEL SuSE CAM 6.7.0 Firmware Release for F5100Date: Nov/17/2010Installation Requirements:Additional instructions may be listed belowSolaris Release: Note: Redhat SuSESun OS Release: Note: RHEL SuSEUnbundled Product: Sun StorageTek Common Array Mgr Firmware UpdatesUnbundled Release: 6.7.0Xref: Topic: Relevant Architecture: i386BugId's fixed with this patch:6961484 6969860
Changes incorporated in this version:6969860 6961484
Patches accumulated and obsoleted by this patch:
Patches which conflict with this patch:
Required Patches:
Obsoleted by:
Files Included in this Patch: Note:
sun-cam-fw-j4000-6.7.0-11.i386.rpmProblem Description: 6969860 LF1.0-ERIE: Win2k8 SP2 driver loses SCSI enclosure several times per second
6961484 LF1.0 Erie - Driver does not connect to devices after power-cycle
Revision History:
145967-01:
F5100 Firmware
SAS Expander:
sasxfwmo.5.04.05.fw

DS 5.2.4 Upgrade Issue - Unable to login to console

Hello! I have not been able to login to DS console after I have patched it to 5.2.4. I have found another thread with the same issue with solution https://forums.oracle.com/forums/thread.jspa?messageID=8517561 (add ldap library into runtime linking environment using crle) provided but I'm still unable to login to console after I applied the solution. Please kindly advise! Thank you.
[10/Apr/2012:18:59:52] info (21546): SunONE-WebServer-Enterprise/6.0SP3 B05/19/2004 02:48
[10/Apr/2012:18:59:52] info (21546): Access Host filter is: *.abc
[10/Apr/2012:18:59:52] info (21546): Access Address filter is: *
[10/Apr/2012:18:59:52] info (21547): Installing a new configuration
[10/Apr/2012:18:59:52] info (21547): [LS ls1] http://abc.com, port 390 ready to accept requests
[10/Apr/2012:18:59:52] info (21547): A new configuration was successfully installed
[10/Apr/2012:18:59:52] info (21547): Using the Java HotSpot(TM) Server VM v1.4.2_03 from Sun Microsystems Inc.
[10/Apr/2012:18:59:52] info (21547): Java VM classpath: /var/Sun/mps/bin/https/jar/NSServletLayer.jar:/var/Sun/mps/bin/https/jar/NSJavaUtil.jar:/var/Sun/mps/
bin/https/jar/NSJavaMiscUtil.jar:/var/Sun/mps/bin/https/jar/servlet.jar:/var/Sun/mps/bin/https/jar/servlet-2.3-filters-api.jar:/var/Sun/mps/bin/https/jar/jsp
engine.jar:/var/Sun/mps/java/ldapjdk.jar:/var/Sun/mps/java/jss311.jar:
[10/Apr/2012:18:59:52] info (21547): Loading IWSSessionManager by default.
[10/Apr/2012:18:59:52] info (21547): IWSSessionManager: Maximum number of sessions is 1000
[10/Apr/2012:19:00:05] failure (21547): for host ::ffff:x.x.x.xtrying to GET /admin-serv/authenticate, cgi-parse-output reports: the CGI program /var/S
un/mps/bin/admin/admin/bin/userauth did not produce a valid header (program terminated without a valid CGI header. Check for core dump or other abnormal term
ination)
[10/Apr/2012:19:04:38] failure (21547): for host ::ffff:x.x.x.xtrying to GET /admin-serv/authenticate, cgi-parse-output reports: the CGI program /var/S
un/mps/bin/admin/admin/bin/userauth did not produce a valid header (program terminated without a valid CGI header. Check for core dump or other abnormal term
ination)
Edited by: Albert.C on Apr 11, 2012 10:37 AM
Edited by: Albert.C on Apr 11, 2012 10:39 AM

Hi anyone can advise me on this?

Web console doesn't accept login

I am having some problem logging into the web console on one of my Solaris 10 8/07 machines. The web console is online, and showing no errors in any of it's (or the system's) log files. However, when I try to use the root username and password to log in, it tells me the password is not correct. The same root username and password work for logging in at the console. Has anyone seen this problem before?
I have patched the machine with all the latest patches available as of April 16th/08....uname -a shows 127112-11
This machine has N1 System Manager installed on it as well.
Thanks in advance,

It seems as if the console login is working fine. I can log in from both the console and via SSH as root. The problem I am having is that the Sun Java Web Console installed on this machine does not seem to be linked with system authentication ( I can't log in as root, though I can on my other Solaris 10 8/07 boxes ).
The Java Web Console is a standard part of Solaris installation (well, "Entire System" cluster, at least), and is accessed via https://localhost:6789/

Unable to update Mobile Application in web console

Hi,
I am just wondering any body experianced the same issue.
version :Mobile engine 2.1
Issue : After creating MSD using MEREP_MSD_APPLICATION I am unable to edit the mobile application in web console.
Error Message in Web console :
Data for this entry is not complete or not correct.
This entry therefore cannot be changed or deleted
Can you please update is there any work around to get rid if this problem
Regards
Murali

It's normal. The documentation says it - the automaticaly created application entry is broken. What you have to do is the following:
1) Delete the broken entry
2) Manually create it again, with THE SAME data you have put in the MEREP_MSD_APPLICATION. Whit the creation you upload the complete .WAR file.
Everything should be ok after this procedure.
Enjoy!

Unable to login to design console

I am unable to login to Design Console. I am getting the following error.
Error Keyword: DAE.CLIENT_NOT_BOUND
Description: Database client has not bound to the server-side database object. Either the client database object has never bound to the server-side database object, or the server-side database object is no longer accessible.
Remedy: Attempt to login again. If this fails, contact your system adminstrator.
Action: E
Severity: H
Help URL:
Detail:

Open the xlconfig.xml and check for Application URL etc .. whether they are pointing to the correct server or not and make sure server is running .
Thanks
Suren

Unable to login to Mobile Console

Hi,
Not sure why but we are unable to login to the Mobile Server console. I'm positive that I am entering the correct password. However, the message we receive
is Please verify your username, password, url and try again!
Not sure how to troubleshoot this. Anyone have ideas? This worked fine this morning.
Thanks
Bill

a) stop the glassfish server from the Windows Services
b) start glassfish server using
C:\app\DMS\Mobile\Server\bin\runmobileserver.bat

Suddenly unable to login via console

I restarted my guest that's been running fine for a few days, and suddenly I am unable to login thru the java browser-based console thru the VM Manager.
Everything about the console looks fine: It shows me all the usual startup messages if I open it while the VM guest is booting, it prompts me for the login username and password but instantly returns to the "TestVMHost login:" prompt after entering the correct password. It does this for all three plain users and root that I have established in this VM guest.
I can SSH into the VM guest just fine with PuTTY over the network and login with any valid username/password, so I am not locked out of access to the VM guest. It's just the java-browser console app itself that suddenly stopped letting me login.
Any ideas?
PS: the VM server is 2.2 and the guest is OEL 5.4 installed from media, not from a pre-built template, both are 64-bits.

Hi, I have no idea of what can be the reason for your sudden console blackout...
What I can say is that here on my side, SUDDENLY, after a few random reboots (and without touching anything else!), I'm not experiencing the system-console error messages flood anymore (pls see my last post, sorry I'm a bit in a hurry and I'm not able to put in the link).
I have a different error now, just one, after that it looks like it started to function "by itself".
I'm starting to think OVM 2.2 has major problems with networking, and I have the feeling they are related to the new bridge "xenbr0:0" that has been probably created for putting one more layer of abstraction regarding the Server Pool Master (has it been designed like this to make possible automatic migration of VM Guests that used to be running on a failed Server Pool Master? Who knows... On 2.1.5, in that scenario, HA wouldn't have been of help, and no automatic restore of any VM Guest would have happened).
What I can say after a few days of tests is I dont' trust this system, thinking to steadily go back to 2.1.5...
I'm maybe doing something wrong too, but this is the feeling. I have also several more minor issues too. Uhm.

Unable to Login to Middleware (Web Console)

Similar Messages

Maybe you are looking for