Unable to login to Nikeplus website

For the past month I have been unable to access the Nikeplus website during my nano sync. After clicking on the "visit nikeplus" button, I have been getting the following error message "iTunes could not connect to Nikeplus.com. An unknown error ocurred (-23)". Has anyone else experienced this problem. I have tried to reset the nikeplus sign-in in iTunes, but still unable to access nikeplus.
njfalcdad05

i just got the nike+ and wanted to upload info and am getting the same message! would someone please let us know what is going on

Similar Messages

Unable to login on software website suddenly; unable to fix problem; works fine with other computers Advise on suggestions

Windows 7 platform
Office 2010
Have tried Foxfire (recommended by software co) and Explorer
Neither works all of sudden

I am experiencing this exact same issue. I have a few things I have noticed as well. If I go to the iView (where you would edit it) and preview it first, it runs fine. It also works if I have it open in another window, instead of the portal frame. Also, as soon as I have previewed the iView first, if I then go and run it, it will work. But otherwise it will not let me log in. I have been using IE to test, however I have found that if I use Mozilla I can then log into most of the applications I was having trouble with.

Unable to login to Blackberry on phone but can on website

Dear all I have an old blackberry phone and I wanted to access the phone. The phone number has changed as I put a new chip in it. I was able to login on the website with my email username and password but it does not recognise me when I log in on the phone. Now it seems I have used up all my attempts. Is there anyone to contact to get this sorted out? I bought the phone from T Mobile in the UK Thanks Jamws

This would the your BlackBerryID you are inputting... NOT the Security password?
If the BBID used on the device in the past is different than what is on the device now, you will be required to perform a security wipe on the 9320 and at the setup screen, use the new BBID.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Unable to login with my ID and password

Hi guys need help. I am unable to download any App as i am getting an error while logging to my account with the username and password. I tried logging into the website from my laptop i was able to. Pls help, i am unable to download anything that requires username and pass.
The error i am getting is "Unable to login to your Blackberry ID account".
Regards
Kiran

kiran217 wrote:
Hi guys need help. I am unable to download any App as i am getting an error while logging to my account with the username and password. I tried logging into the website from my laptop i was able to. Pls help, i am unable to download anything that requires username and pass.
The error i am getting is "Unable to login to your Blackberry ID account".
Regards
Kiran
HI Kiran217
Welcome to BlackBerry Support Forums
Sorry to hear that you are having proble with your BlackBerry®Torch9810.Please go through this Knowledge Base Article and try all suggestion and see if that helps.But first do your Device backup because there is a suggestion within this KB as a last resort in which case you may need that.
KB28212 : "Unable to login to your BlackBerry ID account" or "Unable to update your BlackBerry ID account information" error occurs on a BlackBerry smartphone running BlackBerry 7
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Unable to login to update the photoshop or the illustrator through the Creative cloud dock in Mac

I am unable to login in the Creative cloud dock in Mac but am able to login in their website with the same ID and password. Everytime i try to update, it asks for authentication but is not accepting the details.
I tried to contact support through chat, but they never seem to be available.

Sunilbabuvk I believe you are being prompted to enter your administrator password. You can find details regarding the installation process at Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html. If it is asking for your administrator credentials then you will want to enter the same information you use to log into your computer.

Unable to login to Switch & Router through secondary Acs ,when primary ACS is down.

Dear All,
i have configured primary ACS in DC data center and secondary ACS in DR data center, i have configured replication , and it is working well, but when we put down primary ACS , we are unable to login in switch and router through secondary ACS , i ahve dedicated link between core dc sw to core dr sw through which all traffic is getting replicated . All user , mgmt vlan are created in FWSM firewall.Kindly help.
Regards
Amit Kulshrestha

Hi Bro
I'm assuming you've configured your ACS correctly and the Cisco network devices correctly. Perhaps, this could be a bug. The reason I say this is because last week, I was implementing 2 units of Cisco ACS 1121 v5.3 (in HA mode) for a client, and i had similar issues myself. When I down the primary ACS, I'm unable to login to my network devices, eventhough my secondary ACS is UP and PINGable from all network devices.
Hence, I downloaded and applied the latest cummulative patch from the CCO website 5-3-0-40-4.tar.gpg (Release Date: 27/May/2012) and my problem solved.
Perhaps, your ACS version isn't 5.3, but the morale of the story here is, maybe patching is required for your case!!
Please do let me know the outcome. May the force be with you, bro!

Unable to login to Pinterest

I have been unable to login to Pinterest for a number of weeks and unfortunately am unable to determine what changed since the last successful login. Upon entering credentials into the login form and hitting submit, the page reloads to the main index page. The account itself works with other browsers so it is a Firefox issue. All add-ons have been disabled and the entire process as described in "Fix login issues on websites that require a username and password" has been performed to no avail.
(Using Firefox 32.0.2)

Many site issues can be caused by corrupt cookies or cache.
* Clear the Cache and
* Remove Cookies '''''Warning ! ! '' This will log you out of sites you're logged in to.'''
Type '''about:preferences''' in the address bar and press enter.
* '''Cookies;''' Select '''Privacy.''' Under '''History,''' select Firefox will '''Use Custom Settings.''' Press the button on the right side called '''Show Cookies.''' Use the search bar to look for the site. Note; There may be more than one entry. Remove '''All''' of them.
* '''Cache;''' Select '''Advanced > Network.''' Across from '''Cached Web Content,''' Press '''Clear Now.'''
If there is still a problem,
'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
While you are in safe mode;
Type '''about:preferences''' in the address bar and press enter
Select '''Advanced > General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites. Are there any problems?
Then restart.

Unable to login in to Mac App Store using valid account.

I recently inherited a spare MacBook Air from my wife (who got a new one). I deleted her user account, and set up a new admin user account for me. The machine is running 10.7.5.
Now, I am absolutely unable to login to the App Store. I am using my valid Apple ID -- for example, the same Apple ID that I used to gain access to this very forum. System Preferences accepts my ID. iTunes accepts my ID. BUT the App Store will aboslutely NOT respond. It will not load. I get the red "connection failed" alert, and then after several tries it doesn't respond at all.
It doesn't give any option to switch users -- perhaps once the original owner has used the App Store, the computer will never again allow anyone else to use it? It doesn't say that there is another user logged in. There appears to be no way of deleting and reinastalling the App Store. There is no cache file I can find to be cleared. There is no preference option. There is no information. There appears to be no way of fixing this at all, short of wiping the hard drive and reinstalling the operating system. Is that what I have to do? WHY IS THIS SO HORRIBLY DESIGNED? And why is there no support short of the forum? I hate this about Apple (despite being a long-time Apple evangelist and OSX devotee).
Thanks.

The first thing you should do after acquiring a second-hand computer is to erase the internal drive and install a clean copy of OS X. How you do that depends on the model. Look it up on this page to see what version was originally installed.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard installation disc, which you can get from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. I suggest you install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the gray installation discs that came with it. If you don't have the discs, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, it should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
Once booted from the disc or in Internet Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive, which is what you should do.
After partitioning, quit Disk Utility and run the OS X Installer. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
You should then run Software Update and install all available system updates from Apple. If you want to upgrade to a major version of OS X newer than 10.6, buy it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.

I am unable to login from my login page after I restarted my mini mac running snow leopard 10.6 server. I am a new user. Need help

I am unable to login from my login page after I restarted my mini mac running snow leopard 10.6 server. I am a new user. Need help

Try clearing your cache, [https://support.mozilla.org/en-US/kb/How to clear the cache Instructions here]. Then, try going to [https://accounts.google.com Google Accounts]. If there is currently an account singed in, sign out, then back in. After that, try going to Google Adwords.

Unable to Login to Creative Cloud App

Photoshop CC was crashing every time I attempted to open a new file inside of the application (Photoshop would stay open as long as did not attempt to open a file.)
I uninstalled PS CC.
When I attempted to reinstall. I received the following message in the CC app:
"Unknown Server Error: Sign in is currently unavailable. We are unable to access your account. Please try again later."
I ran the CC cleaner, restarted, and reinstalled CC. I am still receiving the message and unable to login.
My password has been reset from the recent security warning, and I am able to login to my Adobe account online, and everything seems to be in order.
I am running on OS X 10.8.5.
HELP, please.

Hi Bethany,
Welcome to the Community!
Try Solution 2 in this link: http://helpx.adobe.com/creative-cloud/kb/unknown-server-error-launching-cc.html, if doesn't work then try others.
Thanks!
Ankit

Issue with cisco acs 4.2.Users unable to login aaa client but after restarting group policy able to login

issue with cisco acs 4.2.Users unable to login aaa client but after restarting group policy able to login

issue with cisco acs 4.2.Users unable to login aaa client but after restarting group policy able to login

Unable to login with Jabber Windows

Hi ,
Am unable to login the Jabber Windows Client. Getting the error as "Unable to Communicate With the Server".
Able to login with CUPS & CUCM end user page. CUCM Integrated with LDAP.
While going through the UP Profile logs seen that "Failed to SOAP login".
Tried with restart of CUCM & CUPS several times but no go.
CUCM Version - 8.6.2
CUPS Version - 8.6.1
Tried with CUPC client result also same.
Thanks in Advance

If credentials work on CCMuser CUPSuser I would suspect either some kind of communication problem between the clients and the servers and/or misconfiguration (user/device/line association, device owner, roles, CTI/CCMCIP profiles, etc) on CUCM/CUPS.
Specially because you mention the same happens with CUPC.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk

User having all authentication but unable to login in planning why ?

user having all authentication but unable to login why in planning ?

You might need to give some more details.
For example, what kind of provisioning in shared services, under what groups if any, what kind of dimension level access in planning etc?

Unable to Login into APEX after upgrade from ORACLE XE to APEX 3.2

Hi,
I have upgraded Oracle 10g XE to with apex_3.2 on the Windows XP.
My ORACLE XE wa in folder "C:\ORACLE XE"
And APEX 3.2 in folder "C:\Ver 3.2\APEX"
Once you complete the standard install, i performd the following steps to complete
the upgrade which i got on my previous post.
Till normal installation i was able to login in Apex link and was able to run my application which was
in oracle XE but the only problem was i was unable to see any images in "EDIT PAGE" but my application was running well.
then i did following steps to get those images
Connect to SQL*Plus as SYS
@APEX_HOME/apex/apxldimg.sql APEX_HOME
@APEX_HOME/apex/apxxepwd.sql password
(where password is the password of the Application Express internal ADMIN account)
I chanbged image directory as below
FROM:
create directory APEX_IMAGES as ‘&1/apex/images’ ;
TO:
create directory APEX_IMAGES as ‘c:\oraclexe\apex\images’ and also tried ‘c:\ver 3.2\apex\images’;
Ran @apxldimg.sql
@apxxepwd.sql password (where password is the password of the Application Express internal ADMIN account)
Exit from the SQL*Plus session.
Change directory to c:\oraclexe\apex\owa, open the README.TXT file and follow the instructions within to complete the installation
But now i am unable to login into the page itself. It "showing Page Not Found"
Please kindly help me how to run APEX now through link.
Thanks in advance.
Thanks & Regards
Sanjay
Edited by: user11204334 on Aug 11, 2009 2:05 AM
Edited by: user11204334 on Aug 11, 2009 4:30 AM

Hi John,
Thanks for reply
I got error while doing following steps in few procedures
Change directory to c:\oraclexe\apex\owa, open the README.TXT file and follow the instructions within to complete the installation
Before doing the above step i was able to login into my application but without images
Can you please help that how to check those errors and any particular procedure you know which is responsible for the Login problem.
Thanks a Lot for help John
Thanks & Regards
Sanjay

Open Directory - Unable to login Workgroup Manager

I am unable to login to Workgroup Manager with my diradmin account.
I know the password is correct.
This is on Mac OS X Lion 10.7.2
Everything was working fine last night, but then it stopped functioning. I am able to see all the users, but they are greyed out. When I try to login, I get "The login information is not valid for this server"
The LDAP log shows a bunch of the same errors that it did not show before.
slapd[76]: SASL Failure: GSSAPI Error: Miscellaneous failure.
Please advise. Thank you.
Samson

Try logging in to Workgroup Manager using the local admin account not the diradmin account. If this works, then try accessing the /LDAPv3/127.0.0.1 choice using the diradmin account.

Unable to login to Nikeplus website

Similar Messages

Maybe you are looking for