Unable to login to SAP instance after hardware changes

Hi,
We have a central instance and 3 application servers. System board and NIC cards have been changed by windows team on one of the applications servers. After the hardware changes users are not able to login to SAP. All the instances are placed under logon group and the users login through load distribution.
After hardware changes, we have started the application server and SAP is running fine on it. Now it has response time 0, which is best of all instances. All the new logins are diverting towards this instance as it has better response time of all and the instance is not allowing users to get into it nor to any insatnce. When we pulldown this instance users are able to login to other instances.
We have treid changing NIC cards and windows team confirmed that ILO is working fine.
Please help us in resolving this issue.
Thanks,
Venu.

Primary checks - check logon groms SMLG - if the distribution are done and active with all instances.
also check by login directly to CI without any logon grop and check that all the instances are shown in SM51 by double clicking and checking all work process for each instances look perticularly if all the Diag WP's are free for all instances.
Regards;

Similar Messages

Unable to login to SAP B1 after database migration

I would like to know how to login to SAP B1 after database migration. I export data from MSSQL 2005 and import data to MSSQL 2008 which is located in different server. I failed to login to SAP B1 with both current password and default password. It will prompt me the error 'User code or password is incorrect'. Is there any other login ID(current user ID is manager) or how I can change the password? Or is there any other way to transfer or migrate the database to a new server?

hi,
i am afraid your database is corrupted, try to make a full database backup from your SQL 2005 then restore it to your SQL 2008. also you can try another method, by detaching your Database from 2005 then copy the .MDF and .LDF then copy this 2 files in your new server, put it in your desired directory, then from your SQL 2008, attached the Database.
also, have one question, is your SA account in 2008 and 2005 have the same password? it must be the same.
regards,
Fidel

Issue with cisco acs 4.2.Users unable to login aaa client but after restarting group policy able to login

issue with cisco acs 4.2.Users unable to login aaa client but after restarting group policy able to login

issue with cisco acs 4.2.Users unable to login aaa client but after restarting group policy able to login

Hi, I am unable to login to SAP system

Hi,
I am unable to login to SAP system. How could I login to SAP SYSTEM?

if ur unable to login into the sap system.
go to the sap market place . get the keys and open the lock.
u will login into the sap system.
how many times u will ask the same questions in all the forums...........

Problems to start SAP instance after reboot

Hello experts,
we are occuring a problem that we are not able to start our SAP instance after we applied some MS patches and rebooted the server. We also deinstalled these patches buzt this also did not help, so I guess the reason somewhere else.
We are running a SQL server 2000 on a Windows 2003 SP2 (32bit)
SAP kernel is 640 PL 304
The SQL server seems to operate normally, however when we try to start SAP via MMC the process disp+work fails (it's green for a few seconds, but then turn so grey).
In dev_w0 I can find this entry
C Mon Feb 22 12:35:18 2010
C OpenOledbConnection: line 23082. hr: 0x8000ffff [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.
C sloledb.cpp [OpenOledbConnection,line 23082]: Error/Message: (err 17, sev 10), [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23082]: Error/Message: (err 0, sev 10), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
I hope you have an idea to solve the issue soon.
Thanks a lot
Philipp

Hi,
yes I read this SAP note however when I try to install this patch
It fails with message "installation unsuccessful"
Reason ??
Check the following:
1. Status of SQLServer Service(s)?
2. Windows Event Log Entries?
What is the SP level of SQL Server 2000 ?
Also, Perform the Connectivity Test as per[ this link|http://support.microsoft.com/kb/827422/].
Regards,
Bhavik G. Shroff

Freezing/Crashing in sleep or hibernate mode after hardware change

Hello. To get right to the chase, I have this envy 15 series laptop. It came with a 768GB hdd, which I upgraded to an SSD (512GB one) Recently, I decided to downgrade the storage back to the original hdd the laptop came with. I was obviously expecting my system's performance to decrease, especially with boot times and what not, but I was also expecting the performance to be the same as what it was when I originally received my laptop, more or less. However, this has not been the case. The laptop's performance has greatly suffered after reinstalling the *originaly hdd this laptop came with* Issues: Boot up times are ridiculously slow now. I mean, so slow that I figure I should go downstairs and have a drink while I wait for it to boot slow. It was never even remotely this slow, before or after upgrading to my ssd. When the pc goes to sleep, it does not wake up. Perhaps it would wake up if I left it alone for a few hours, but I'm not willing to do that, and no one should be. I'm also speaking literally right now. I have to force my laptop off and then turn it on normally in order to boot back from "sleep" mode. I've since had to turn off automatic sleep. If I close the lid to let my laptop hybernate, it does not recover. When I turn it on, it looks like it will return from hypernate, but it does not. It turns itself off. When I turn it on again, it boots normally, but it does so as if I had shutdown the pc and then booted back up. It takes windows a long time to login, and get everything running so that the pc runs normal. None of this is normal. This pc has absolutely no excuse to be running this slow. It never has, and it only started after switching back to my hdd. What I did: I cloned my HDD onto an SSD. In case it matters, I used Acronis true image to do it. Last night, I switched back, and used the same software to clone my SSD back into my HDD. I'm not sure if this is relevant, but there you go. I used sector writes to clone the SSD back into the HDD. I think I did the same to clone the HDD into the SSD the first go around, as I seem to recall having issues with the automatic clone last time as well as this time, but I'm not 100% positive. Troubleshooting steps I've taken: I first ran a complete chkdsk /r in order to fix any problems, and then allow me to extend my C drive for all of the free space my disk now had, due to cloning a smaller drive. I then did a full defrag and optimize on my disk. Finally I ran winsat to recheck my hw's performance, and let windows know that I no longer had an SSD but rather an HDD. This turned superfetch back on, and I confirmed that it was now running again. I'm not really sure what else to do.

Hi ,
Thank you for visiting the HP Forums! A great place where you can find solutions for your issues, with help from the community!
I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP ENVY 15-j171nr Notebook and issues with Freezing/Crashing in sleep or hibernate mode after hardware change. Here is a link on performance issues. I recommend to restore the BIOS defaults.You could restore the BIOS with this document selecting the reloading the BIOS default settings which has helped others. I hope this helps. Thanks.

Unable to login to sap after importing support package

Dear consultants,
I have applied the support package basis 11, but it terminated since then i am not able to login to sap from any client and any user,
please give your opinions,
it gives dumps, and at the bottom of logon screen it says, status 0020 program sapmsyst .
regards,

Sameer,
I hope your problem is resolved right now. If not,
It would be better if you can give a little more information as to which system and version did you apply support pack to? What was the SPAM support pack level? At what phase did the SAPKBxx11 support pack terminated? What OS are you running on? Also, please check if any transports are still running at the 'OS' level.
Thank you.

Can not start SAP instance after change the profile

Dear all
We use system copy to build SAP system.
Source
Ecc 6.0(64 bit)
Windows Server 2008 SP2
SQL Server 2008 SP2
Target
Ecc 6.0(64 bit)
Windows Server 2008 SP2
SQL Server 2008 SP2
In target system, we want to use the instance profile as source system,
but after copy from source system we find that if parameter em address_space_mb = 512 in the profile,
we can not start SAP instance.
Could anyone explain it?
Best regards
Shirley

Hi Shirley,
I assume the hardware is less on the target than on the source or they are different at least in terms of hardware specs
If the system is not starting, check the dev_disp.log, the stderr* files, and the dev_w0 log from the work directory to find the exact error. Does the system start if you increase or decrease this value?
Regards,
Paul

Unable to Login & Ececute any transaction after Applying Support Package

Dear all,
After applying SAP_BASIS Packs (SAPKB700..) support pack from level 15 to 18, the it got cancelled and when i try to execute any transaction i am receiving ABAP dump "syntax_error".
When i try to login i m getting the following msg. " Syntax error in program "SAPLSDOC ""..
SAME MESSAGE IS POSTED IN 2007 BUT NO ANSWER
Unable to login after applying patches
could you help me to resolve this problem?
Thanks and regards.
Subbu

Hi,
Is Support Package upgrade failed in IMPORT_PROPER step ? then plesae refer
support pack SAPKB70014 stuck at import _proper! Very urgent.
http://www.sapfans.com/forums/viewtopic.php?f=12&t=309661&p=954180
We also faced same issue in Solution manager and issue solved by running to r3i commad
tp r3i <SP_name> <SID> pf=<transport profile> -Dclientcascade=yes -Dstoponerror=8 -Drepeatonerror=8 -Dsourcesystems= tag=SPAM
eg:
D:\usr\sap\trans\bin>tp R3I SAPKB70014 SID pf=TP_DOMAIN_SID.PFL
-Dclientcascade=yes -Dstoponerror=8 -Drepeatonerror=8 -Dsourcesystems= tag=SPAM
Note: Before executing above command please contact SAP (OSS message)
Thanks,
Preethish

Unable to login to my WindowsPC after installing new iTunes version 7.4.3.1

Hi all,
I just received an alert saying a new version of iTunes was available and I went ahead and installed it. After the install the system prompted me to restart. I did the restart and now I am unable to log back into the system.
I tried my local and domain accounts and all that happens is it starts the login process and says loading local settings and then says logging off and gives me back the login screen.
I am unable to gain access to the system through normal settings and or safe mode. I fear that if this is a iTunes problem we're going to have major problems at my clients who do allow this application on their network.
Any thoughts, issues on or about this?
Please advise.
Thank you,
~The Suite~

Hi Timmy,
Thank you for the comments and feedback. I had logged into the system when I got in this morning and nothing else was installed nor changed. The iTunes update was the only change between the successful login and now me being unable to login.
I am doing some rollbacks and will see what happens.
Thank you,
~The Suite~

Server admin is unable to login to server.app after upgrade to Mountain Lion Server?

After upgrade to Mountain Lion Server I am unable to login to the server tools. When I input the admin user name and password the dialog box just shakes indicating the wrong password. But it is the correct password. How do I reset the password or if necessary how do I rest the server and start over on Mountain Lion. I found info on how to reset the server on previous versions of the server which involved executing a plist in the LaunchDaemon folder. However that file does not exist on the server following upgrade to Mountain Lion.
Thanks, Howard

I upgraded today and had the same issue. I took following steps to fix my computer.
Boot into Recovery Partition (Hold Option Button while booting)
Open Terminal.
Type resetpassword
Select your hard drive
Select the user account (Administrator)
Enter a new password for the user
Reenter password
Save
Restart
Boot normally, Login as Adminstrator with the new password and add "Admin" permission to your account.
Restart
Everything should be working as expected

Unable to login to IDES system after client copy

Hi guys
the IDES system which i was using was working fine. I was trying CLient copy today morning and was trying to create a new client in the IDES system.
The client copy failed due to a shortdump in the process.
Now i am unable to login to the client 800 as it says the user password is incorrect.
How do i get back my 800 client? is there a way to get back the client 800 or do i have any other optionn to re-set the password without logging on to the client?
i do have access to client 000.
please guide me what should i do? i need the client 800 back and should be able to login too.

hi,
i cannot login to client 800. I need to login first in the client 800 to go to su01 to re-set the password.
I want to login to client 800 which i am unable to do as a result of client copy. So the other option i am looking at is reset the password from client 000.
anyways thanks for your inputs
Hi guys,
any idea?
Edited by: Workflow learner on Jun 2, 2008 10:48 AM

Unable to Login to Idle Instance from SQL*Plus in windows

Hello,
I'm cloning the db from windows to windows enviornment. At auxilary instance after configuring the Listener and making Password file to right folder when I try to connect to Idle Instance through sql*plus by follwring connad
c:\sqlplus sys/password as sysdba
It gives me ORA-12518 Tns: Listener could not hand off client conenction error
Then I put the follwing parameter in listener.ora DIRECT_HANDOFF_TTC_LISTENER=OFF and restart listener and then try to connect it gives me Ora-12560: TNS protocol adapter error.
I try to connect through tnsnames but give me same error.
Kindly tell me how to resolve this issue as its not allowing me to connect to an idle instance so that I can go further.
I'm using 10gR2 on windows server 2003.
Regards,
Abbasi

follow the steps to clone database:
# 1. Backup the source database.
To use RMAN duplicate an RMAN backup of the source database is required. If there is already one available, skip to step 2. If not, here is a quick example of how to produce an RMAN backup. This example assumes that there is no recovery catalog available:
rman target sys@<source database> nocatalog
RMAN>backup database plus archivelog ;
RMAN> backup archivelog all;
This will backup the database and archive logs.
# 2. Produce a pfile for the new database
This step assumes that the source database is using a spfile. If that is not the case, simply make a copy the existing pfile.
Connect to the source database as sysdba and run the following:
create pfile='init<new database sid>.ora' from spfile;
This will create a new pfile in the $ORACLE_HOME/database directory.
The new pfile will need to be edited immediately. If the cloned database is to have a different name to the source, this will need to be changed, as will any paths. Review the contents of the file and make alterations as necessary.
Because in this example the cloned database will reside on the same machine as the source, Oracle must be told how convert the filenames during the RMAN duplicate operation. This is achieved by adding the following lines to the newly created pfile:
db_file_name_convert=(<source_db_path>,<target_db_path>)
log_file_name_convert=(<source_db_path>,<target_db_path>)
# 3. Create bdump, udump & cdump directories
Create bdump, udump & cdump directories as specified in the pfile
# 4. Create a service
c:/>oradim –new –sid <clonedatabasename> –intpwd <pwd>
eg:
c:>oradim –new –sid clonedb –intpwd oracle
# 6. Duplicate the database
From sqlplus, start the instance up in nomount mode:
startup nomount
Exit sqlplus, start RMAN and duplicate the database. As in step 1, it is assumed that no recovery catalog is available. If one is available, simply amend the RMAN command to include it.
rman target sys@<source_database> nocatalog auxiliary /
duplicate target database to <clone database name>;
thats it
For RMAN Cloning refer:
follow the documentation replace the destinations/locations with your location/folder/destination in source and target database.
http://www.dba-oracle.com/t_copy_clone_windows_database.htm
http://www.shutdownabort.com/quickguides/clone_rman.php
http://www.akadia.com/services/ora_duplicate_database_rman.html
for manual cloning in windows refer the link below:
http://coskan.wordpress.com/2007/04/20/adding-new-database-to-windows-without-dbca-or-rman-clone-or-rman-restore/

Lens correction filter doest work after hardware change

Hello,
Since I reinstalled my computer from scratch after a hardware change (went from AMD GPU to an NVIDIA GPU) lens correction filter doesn't work anymore.
I can open the tool, do the corrections but when I pusch apply, the tool is closed but the corrections are not applied to the picture in the editor screen.
No layer is added.
When I close PSE multiple temp files are left in the root directory of my secundary drives.
This happened with PSE 7 so I bougth PSE 9, de-installed PSE 7 and installed PSE 9. Guess what: same problem, no corrections applied.
Is this Nvidia related since everything worked nice in PSE 7 with amd catalyst drivers ?
I'm running Vista32 sp2, with latest directx and latest nvidia geforce drivers.
mda97

1) The problem with the Delete Cropped Pixels option is that it essentially eliminates the nicest functionality of the new crop tool.....My suggestion to Adobe would be to enable some way of having the screen view imported into the lens correction filter but leaving the cropped information intact for future adjustments once the image was returned to the main PS window....
2) The Camera RAW preferences setting adjustment was what I needed, thank you!
3) The problem with the saving to PSD option, is that even when I do NOT have layers, it seems to default to saving as PSD. Essentially, any adustment I make, except the most basic, even if I do not have any layers as a result, gets interpreted as needing to be saved as a PSD. This is categorically different than in all prior editions of Photoshop. (For instance, whenever I worked on JPGs and I would save a file on older versions, it would simply default to JPG unless I actually had visible layers in the layers window. On this one, if I do anything like content-aware fill, or use the patch tool or healing brushes, it then saves to PSD by default, even though there are NO visible layers that need flattening. It seems as if the program is interpreting those kinds of adjustments internally as layers and selecting PSD as the necessary file type to save to as a result.)
Thanks for your help; if you have any other suggestions for work arounds for the third problem, I would greatly appreciate them.
-Janet

[SOLVED] "Can't find root device" after hardware change

My old computer died so I got a replacement. The only hardware changes were the motherboard/CPU and a lack of GPU (since it died too). GRUB was setting root to /dev/sda2, but in this new computer that wouldn't work. I figured I'd change it to /dev/disk/by-label, but it still won't boot. I have udev loaded in mkinitcpio.conf and have tried what I could find on google (it had to do with pacman mostly, which is not the issue here).
I'm currently running a gparted parted magic live disc and checked already if the partition is corrupted; it isn't.
What should I be looking at to get by-label working? What kind of info do I need to provide in order to get some help (fdisk, blkid, etc)?
Thanks in advance.
Last edited by knuck (2012-08-19 02:07:01)

Are you sure that that label/partition still exists? (e.g. your filesystem hasn't gotten corrupted)
Have you rebuilt the initramfs since you changed hardware (e.g. via chroot)? If not, try booting using the fallback image.
All you should need to do to get booting by label is change the root= statement in the bootloader's kernel params to
root=LABEL=arch
the initram image's code should handle the rest at boot time.

Unable to login to SAP instance after hardware changes

Similar Messages

Maybe you are looking for