Unable to login when change password option is enabled
Hi,
I have configured remote vpn on my Cisco ASA and users connecting to this will use Cisco VPN dialer and gets authenticated with the Windows 2008 domain controller credentials. Now the problem I face is, when i set the option for user-A as "user must change the password during next login" it doesn't accept , it accepts only when I uncheck only then the user-A will be able to login.
Any ideas what option or configuration do I to do so that it can popoup for changing the password?
FYI I use windows 7 profession edition with Cisco VPN dialer client ver. 5.0.04.0300. I am unable to find "windows logon properties" under the "options" menu.
Hi,
I managed to get the password change option pop-up when "Change password during next login" set for for the user-A in windows 2008 Active Directory. But now the issue is, I enter the old password, it accepts & then its pops up to enter me the new password twice, when I enter the new password with some special charecters it stills pops me up to enter the new password with special charecters. After 2-3 attempts it disconnects. It will allow me to connect only when I un-check the "change password during next login"
Any ideas?
Similar Messages
-
ISE Guest - Change Password Option
Hi All
Can anyone confirm that the change password option on the Guest Self Registration Portal actually works?
I have enabled the options with the ISE Guest Portal to allow the Guest to create his own account and also to change his password.
Although the self creation of the account works fine it doesn't look like changing the password works. When you enter the new password and click submit nothing seems to happen.
ISE version is 1.2.1.198
Regards
RogerHi Roger,
Are you making use of customized self registration portal. In such cases make sure , the session ID of a particular guest login is carried forward to the password change page as well.
For the html changes to any pages (login, aup, self_registration, self_registration_result,
device_registration & change_password) that link back to other pages. The below points A and B should be added as part of customized pages.
A)Reference script (<script src="js/customportals.js"></script>)
B)Add the onsubmit="getDynamicAction(this);" logic for posts
Thanks -
user cannot change password option is automatically getting unchecked while giving domain admin rights
Greetings!
"Domain Admins" falls into the category of protected groups and it is included in ADminSDHolder process. It is normal and was designed in order to prevent the modification to these privileged groups. More information on the link below:
AdminSDHolder, Protected Groups and SDPROP
Regards.
Mahdi Tehrani |
|
www.mahditehrani.ir
Please click on Propose As Answer or to mark this post as
and helpful for other people.
This posting is provided AS-IS with no warranties, and confers no rights.
How to query members of 'Local Administrators' group in all computers? -
Disable "Change Password" option in Comms Express
I need to disable/remove the Change Password option in Communications Express. I'm using patch level 122793-30. How do I do this? Are there any instructions out there for this? I see them for Convergence....which I have installed also but I have users who still use Comms Express.
Thanks in advance!Found it myself.
Edit /var/opt/sun/comms/ce/uwc/common/UserPreferencesSettings.jsp and change:
<div class="Tab3"><a href="<%= getContextURI(request) %>/base/UserPreferencesPassword" class="TabLblNormal" title="<ja
to:getModelFieldValue escape="false" modelClass="com.sun.uwc.common.model.UWCResourceBundleModel" modelName="i18nModel" lookInSessio
n="true" name="uwc-common-options-tooltip-ChangePassword" defaultValue="Change Password"/>"><jato:getModelFieldValue escape="false"
modelClass="com.sun.uwc.common.model.UWCResourceBundleModel" modelName="i18nModel" lookInSession="true" name="uwc-common-options-Cha
ngePassword" defaultValue="Change Password"/></a></div>to:
<div class="Tab3"><!--<a href="<%= getContextURI(request) %>/base/UserPreferencesPassword" class="TabLblNormal" title="<ja
to:getModelFieldValue escape="false" modelClass="com.sun.uwc.common.model.UWCResourceBundleModel" modelName="i18nModel" lookInSessio
n="true" name="uwc-common-options-tooltip-ChangePassword" defaultValue="Change Password"/>"><jato:getModelFieldValue escape="false"
modelClass="com.sun.uwc.common.model.UWCResourceBundleModel" modelName="i18nModel" lookInSession="true" name="uwc-common-options-Cha
ngePassword" defaultValue="Change Password"/></a>--> </div> -
Enable change password option in masthead for the custom role
Hi Experts,
In our project we have to provide change password option to the custom roles. However we don't have to use eu_role or admin role. Could you please let me know how to go about it.
Regards,
RKHi
Please Refer this thread
Password Change - Personalize in EP7.0
You can use old persouserpassword screen after setting the UME property
ume.admin.wdactive to false using the configtool
Regards
Ganesan S -
Im unable to login when i switch on the laptop? please help me out.
hello,
yesterday I installed os yosmite on MacBook pro. today im unable to login when I switch on, my laptop. please help me out as soon as.Hi, I have a similar problem. When I try to log in all I get is a light greyish screen. absolutely nothing else, I wish now that I had not loaded Yosimite. I have tried to Safe Start - to no avail. it is very frustrating and I think apple should not use this technology until it is properly set up. However that does not solve my problem. Can anyone assist me ASAP. Thankyou John L
-
Orclpassword attributes lost when changing password
Hi
When using Apache Directory Studio to change the user password, many of the orclpassword attributes are lost?When userpassword is provided in plain text the orclPassword should get updated.
If userpassword is hashed when modified, the update of orclPassword will fail.
Apache Directory Studio will use hash method SHA by default when changing password.
Make sure hash method plainText is selected.
orclPassword is an EUS/database password identifier for custom authentication schemes like O3Logon for the database server. orclPassword cannot be changed directly, but is indirectly updated by the OID engine itself when userpassword is updated. -
In Portal Anonymous mode - Change password option not coming- login fails
Hi Experts,
We are having some application which requires login in anonymous mode. When we click the application and give the user id password, it loggs in properly, there is no problem in that.
But if the password is reset by administrator, then when entering the reset password given by admin it should ask to change the password. This is happening in normal scenario(/irj/portal), but when try the same in anonymous mode(irj/portal/anonymous) where the prompt is from the login required application, then it says login failed instead of giving the change password and confirm password screen.
Appreciate your help in solving this issue. I hope many would have faced similar situation.
Thanks
YusufHi Yusuf.
Do you use a standard or custom login module for your application?
More likely the used login module does not have a logic that handles such scenario as a change of user's password.
In this case you need to implement a custom module with a required functionality.
Best regards,
Aliaksandr Zhukau -
Change Password Option not working in EP 7.0
Hi,
We have done the configurations for changing the password through get support option in the login page. It is working fine in development and quality. In production system, it is allowing us to change the password and sending the mail also. But when we try to login with new password, we got a error like Authentication Failed.
We are in EP 7.0 SP16, UME datasource is ABAP. Proper authorizations are given to the communication user SAPJSF.
Please help us to solve the problem.
Thanks.Since it is working in DEV and QAS, but not in PRD, the issue should be in the difference between these systems.
I suggest you to look at the default trace on EP and find out exactly what is the problem.
You may also need to change trace level to get more detailed info.
If you need info on how to do it, start from here:
http://help.sap.com/saphelp_nw04s/helpdata/en/d4/aad84d9790420ab5bfb5746177ec5b/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/e2/75a74046033913e10000000a155106/frameset.htm
Regards,
Slava -
Hi,
We have enable "Protect User Updates" option from PWA->Task Setting and Display->Only allow task updates via Task and Timesheets, to protect actual efforts in project plan that PM changes manually, however in some cases we need to allow actual
effort changes in open projects so it there any way or workaround so that Administrator or PM can make changes in actual even though "Protect User Updates" option is enable. Please Help!!
Thanks,
RahulHi Rahul,
Indeed when this option is activated, there is no way to directly update actual work in the project plan.
The workaround is to temporary deactivate this option, more preferly not during office working hours to avoid unexpected project updates.
A better workaround would be to ask the resource to recall, correct and submit again the timesheet, so the PM can approve an updated actual work. Finally the PM can use delegation to rscall and correct the timesheet for the resource.
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS -
Error when changing password of NW J2ee's secure store and Oracle sqlplus
Hi all,
I am wondering on the following:
Current setting:
I have "old_password" for J2ee configtool's secure store.
I have "old_password" for Oracle's sapsr2 user inside Sqlplus.
When I change the password for all 3 place from "old_password" to "new_password", I am not able to connect to configtool. I am also not able to start the Portal service; with logfile error "invalid user/password"
If I change the password back to "old_password", I can connect to configtool as well as start the service.
Snote and forumers (google) mention that update configtool's secure store and "alter user sapsr3" for Oracle database is all I need to change password.
Have I miss out some step in order to change the password for my Enterprise Portal?
Thank you.
Regardsedit: never mind, found the meaning of SDM.
but the command below, is it usable?
For Windows OS:
Open a command prompt and navigate to the folder <Drive>:\usr\sap\DP1\JC21\SDM\program
Execute the below commands:
sdm jstartup "mode=standalone"
sdm changepassword "newpassword=<Enterthenewpassword>"
sdm jstartup "mode=integrated"
StartServer.bat
Edited by: Sek Yao Ooi on Dec 7, 2009 9:21 AM -
Implementing change password options
Hello SDNers,
We are using 2004s (Portal 7.0) integrated with LDAP as user datasource. Now, we want to allow the users to chage their passwords.
However, if the user changes their passwords it should be reflected in LDAP also. I know there is an webdynpro IView for allowing users to change their passwords. But, I am not sure whether it works fine with LDAP data source ?
Also, provide me with the solution how to proceed with ? Appreciate your time and valuable inputs ?
Best Regards,
Anil KumarHello Anil,
Check out the following blog. It deals with "Password hage Application".
A Change Password Application
Regards
Deb
[Reward Points for helpful answers] -
2611xm Terminal Server + ACS + duplicate login when using menu options
Hi,
I'm trying to set up ACS on my 2611xm router, so far I have been able to do this, however when you login,
I have a autocommand setup to run a menu. My problem is when you select the option on the menu it
reauthenicated against the router again before connecting to the line, can any one tell me how to stop this from happening.
Thanks for your time and effort in advance, I have enclosed a config below.
DDRAS01#sh running-config
Building configuration...
Current configuration : 6854 bytes
! Last configuration change at 10:28:49 AEST Sun Feb 21 2010 by <removed>
! NVRAM config last updated at 19:25:53 AEST Sat Feb 20 2010 by <removed>
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
service linenumber
service sequence-numbers
hostname DDRAS01
boot-start-marker
boot-end-marker
security authentication failure rate 3 log
security passwords min-length 6
logging buffered 51200 informational
logging rate-limit all 10000
logging console critical
enable password 7 <removed>
aaa new-model
aaa authentication login default group tacacs+ local
aaa authentication login if_needed local
aaa authentication enable default enable
aaa authentication ppp default local
aaa authorization exec default group tacacs+ local if-authenticated
aaa accounting exec default start-stop group tacacs+
aaa accounting commands 15 default start-stop group tacacs+
aaa session-id common
clock timezone AEST 10
clock summer-time AEST recurring last Sun Oct 2:00 last Sun Mar 3:00
no network-clock-participate slot 1
no network-clock-participate wic 0
ip cef
ip domain list <removed>
ip domain list <removed>
ip domain name <removed>
ip host dd-cr-01e 2033 172.16.1.1
ip host ddsws01 2034 172.16.1.1
ip host ddsws04 2035 172.16.1.1
ip host ddce565 2040 172.16.1.1
ip name-server <removed>
ip name-server <removed>
username netops privilege 15 password 7 <removed>
ip ssh source-interface FastEthernet0/0
ip ssh logging events
ip ssh version 2
interface Loopback0
ip address 172.16.1.1 255.255.255.255
interface FastEthernet0/0
ip address <removed> 255.255.255.0
speed 100
full-duplex
interface Serial0/0
no ip address
shutdown
interface BRI0/0
no ip address
encapsulation hdlc
shutdown
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 <removed>
ip http server
no ip http secure-server
ip tacacs source-interface FastEthernet0/0
ip radius source-interface FastEthernet0/0
logging facility local6
logging <removed>
snmp-server community <removed> RO
snmp-server community <removed> RW
snmp-server location <removed>
snmp-server contact NetOps
menu ddras01 title ^C
Cisco Terminal Server
Select the number from the list below
Use 'ctrl+shift+6' then 'x' to switch back to the menu
^C
menu ddras01 text 1 Connect to DD-CR-01
menu ddras01 command 1 resume dd-cr-01 /connect telnet dd-cr-01 2033
menu ddras01 text 2 Connect to DDSWS01
menu ddras01 command 2 resume ddsws01 /connect telnet ddsws01 2034
menu ddras01 text 3 Connect to DDSWS04
menu ddras01 command 3 resume ddsws04 /connect telnet ddsws04 2035
menu ddras01 text 8 Connect to DDCE565
menu ddras01 command 8 resume ddce565 /connect telnet ddce565 2040
menu ddras01 text 9 Exit
menu ddras01 command 9 menu-exit
menu ddras01 clear-screen
menu ddras01 status-line
menu ddras01 line-mode
tacacs-server host 10.2.0.50
tacacs-server directed-request
tacacs-server key 7 <removed>
control-plane
privilege exec level 15 write terminal
privilege exec level 15 write
privilege exec level 1 ping
privilege exec level 10 undebug ip icmp
privilege exec level 10 undebug ip
privilege exec level 10 undebug all
privilege exec level 10 undebug
privilege exec level 10 terminal monitor
privilege exec level 10 terminal
privilege exec level 15 show running-config
privilege exec level 5 show configuration
privilege exec level 5 show
privilege exec level 10 debug ip icmp
privilege exec level 10 debug ip
privilege exec level 10 debug all
privilege exec level 10 debug
privilege exec level 10 clear interface
privilege exec level 10 clear counters
privilege exec level 10 clear
line con 0
password 7 <removed>
logging synchronous
line 33 64
no exec-banner
exec-timeout 0 0
no activation-character
no exec
transport preferred telnet
transport input all
escape-character 27
stopbits 1
flowcontrol hardware
line aux 0
line vty 0 4
password 7 <removed>
logging synchronous
autocommand menu ddras01
line vty 5 181
password 7 <removed>
logging synchronous
autocommand menu ddras01
ntp clock-period 17208487
ntp source FastEthernet0/0
ntp server <removed>
endHi,
I'm trying to set up ACS on my 2611xm router, so far I have been able to do this, however when you login,
I have a autocommand setup to run a menu. My problem is when you select the option on the menu it
reauthenicated against the router again before connecting to the line, can any one tell me how to stop this from happening.
Thanks for your time and effort in advance, I have enclosed a config below.
DDRAS01#sh running-config
Building configuration...
Current configuration : 6854 bytes
! Last configuration change at 10:28:49 AEST Sun Feb 21 2010 by <removed>
! NVRAM config last updated at 19:25:53 AEST Sat Feb 20 2010 by <removed>
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
service linenumber
service sequence-numbers
hostname DDRAS01
boot-start-marker
boot-end-marker
security authentication failure rate 3 log
security passwords min-length 6
logging buffered 51200 informational
logging rate-limit all 10000
logging console critical
enable password 7 <removed>
aaa new-model
aaa authentication login default group tacacs+ local
aaa authentication login if_needed local
aaa authentication enable default enable
aaa authentication ppp default local
aaa authorization exec default group tacacs+ local if-authenticated
aaa accounting exec default start-stop group tacacs+
aaa accounting commands 15 default start-stop group tacacs+
aaa session-id common
clock timezone AEST 10
clock summer-time AEST recurring last Sun Oct 2:00 last Sun Mar 3:00
no network-clock-participate slot 1
no network-clock-participate wic 0
ip cef
ip domain list <removed>
ip domain list <removed>
ip domain name <removed>
ip host dd-cr-01e 2033 172.16.1.1
ip host ddsws01 2034 172.16.1.1
ip host ddsws04 2035 172.16.1.1
ip host ddce565 2040 172.16.1.1
ip name-server <removed>
ip name-server <removed>
username netops privilege 15 password 7 <removed>
ip ssh source-interface FastEthernet0/0
ip ssh logging events
ip ssh version 2
interface Loopback0
ip address 172.16.1.1 255.255.255.255
interface FastEthernet0/0
ip address <removed> 255.255.255.0
speed 100
full-duplex
interface Serial0/0
no ip address
shutdown
interface BRI0/0
no ip address
encapsulation hdlc
shutdown
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 <removed>
ip http server
no ip http secure-server
ip tacacs source-interface FastEthernet0/0
ip radius source-interface FastEthernet0/0
logging facility local6
logging <removed>
snmp-server community <removed> RO
snmp-server community <removed> RW
snmp-server location <removed>
snmp-server contact NetOps
menu ddras01 title ^C
Cisco Terminal Server
Select the number from the list below
Use 'ctrl+shift+6' then 'x' to switch back to the menu
^C
menu ddras01 text 1 Connect to DD-CR-01
menu ddras01 command 1 resume dd-cr-01 /connect telnet dd-cr-01 2033
menu ddras01 text 2 Connect to DDSWS01
menu ddras01 command 2 resume ddsws01 /connect telnet ddsws01 2034
menu ddras01 text 3 Connect to DDSWS04
menu ddras01 command 3 resume ddsws04 /connect telnet ddsws04 2035
menu ddras01 text 8 Connect to DDCE565
menu ddras01 command 8 resume ddce565 /connect telnet ddce565 2040
menu ddras01 text 9 Exit
menu ddras01 command 9 menu-exit
menu ddras01 clear-screen
menu ddras01 status-line
menu ddras01 line-mode
tacacs-server host 10.2.0.50
tacacs-server directed-request
tacacs-server key 7 <removed>
control-plane
privilege exec level 15 write terminal
privilege exec level 15 write
privilege exec level 1 ping
privilege exec level 10 undebug ip icmp
privilege exec level 10 undebug ip
privilege exec level 10 undebug all
privilege exec level 10 undebug
privilege exec level 10 terminal monitor
privilege exec level 10 terminal
privilege exec level 15 show running-config
privilege exec level 5 show configuration
privilege exec level 5 show
privilege exec level 10 debug ip icmp
privilege exec level 10 debug ip
privilege exec level 10 debug all
privilege exec level 10 debug
privilege exec level 10 clear interface
privilege exec level 10 clear counters
privilege exec level 10 clear
line con 0
password 7 <removed>
logging synchronous
line 33 64
no exec-banner
exec-timeout 0 0
no activation-character
no exec
transport preferred telnet
transport input all
escape-character 27
stopbits 1
flowcontrol hardware
line aux 0
line vty 0 4
password 7 <removed>
logging synchronous
autocommand menu ddras01
line vty 5 181
password 7 <removed>
logging synchronous
autocommand menu ddras01
ntp clock-period 17208487
ntp source FastEthernet0/0
ntp server <removed>
end -
Folio Builder - cannot login after changing password
Hi all,
I changed my password at acrobat.com, now I cannot login with the new password from the Folio Builder panel in InDesign CS5.5. I'm on Mac OSX 10.6.8. Basically, the panel shows "Signing in..." and the endlessly spinning wheel, which means it's hanging and doesn't let me re-enter my login credentials.
I have tried uninstalling and reinstalling the Folio Builder and Overlay Creator tools, and am running the latest versions of each.I've also tried trashing the INDD preferences. No luck. I'd like to avoid uninstalling/reinstalling InDesign CS5.5, but if that's the only solution, I'll do it.
I did create a new user on my machine and that worked — I was able to login successfully with my new login credentials. But moving my production files and recreating all my settings from my account to this new one would take a while, so I wanted to see if there was another solution.
Thanks in advance for any help!
JasonHi John,
Yes, I can login successfully there. The problem also appears to be with the CS Review and Access CS Live panels in InDesign.
When I initially open the Folio Builder, I get the error dialog "Sign In had failed. [svr.InvalidLogin]". The CS Review and Access CS Live panels also report an internal error.
This happens in both InDesign CS5 and CS5.5 (both installed on the same computer). Could the CS5.5 and CS5 panels be sharing that info? I haven't uninstalled/reinstalled the panels from CS5, just from CS5.5, which might explain the error, if I need to also uninstall the CS5 panels/extensions.
Thanks,
Jason -
User accounts locked when changing password
I have tried searching an answer to this for a while but have not found an answer yet. So have decided to see if anyone can shed some light on it.
Basic issue is that a user changes their password on their client machine which then locks their Open Directory account so can not login.
Users authenticate against the Open Directory hosted on a 10.5.8 server. Clients are 10.6.8. No I can not update servers to 10.6 as I only have one licensed copy of it. I syncronise RAID data between the two using PresStore. File sizes are not seen as being the same between OSs so complete backup made each time, not just the changes. Not ready for Lion or Mountain Lion server as I am within a very restrictive environment behind proxy servers, still testing and ironing out issues.
Clients are mobile users and the whole user area is synced on Login, Log out and every three hours when logged in. Fundamentally Mobile accounts work great, except when it comes to changing the password. When doing this the logout sync does not connect and then during the next login the account is locked. Even when unlocking the account it says the account is locked, appearing like a conflict between the local machine and open directory. Home folder is still on client machine.
The only way to remedy this is to delete the user plist through ARD and terminal command run as root
rm /var/db//dslocal/nodes/Default/users/usershortname.plist
Once this is done the user can then log in and it does a full sync.
DNS resolves fine, browsing and connecting to AFP shares is fine (although will not connect to the home directory on logout sync after the password change when shutting down. User can before this point stay connected to the shared volumes, save and work from them but can not automitically connect to the home folder share)
Just don't quite not know where to go now...Please refer below link on same topic, i hope you will get your answer.
http://cn.forums.oracle.com/forums/thread.jspa?threadID=2172418&tstart=0&start=15
Maybe you are looking for
-
is microsoft supported in Lion? mine won't work...also can't send an invoice from Quickbooks...
-
There is an issue in converting a few UNV based WEBI reports (BW data source) from 3.1 to BICS based WEBI reports (BW data source) in 4.1. This is because of a limitation of BICS that it cannot handle the measure / detail objects in query filters. Pl
-
Export the Code of forms !!
hallo !! i wanna ask about ... how we can Export The Code of the forms ... because ,, i wanna get the code to put it in my Project documentation !! plz help me ! Shenouda Bertel
-
My toolbar changed colors in Safari for Windows
My entire menu bar, toolbar, and bookmarks bar is now a weird beige / yellow color. Anyone have any idea what's up? I'm using Safari 5.0.2 on XP. No other browser is affected, my theme remains the same, and I can't find a preference that affects this
-
Can I develop any ipod apps with a G5, Imac 10.4.11?
Do I need to get an Intel based Mac with 10.6.6?