Unable to lookup System

Hi,
I am working on EP6 SR 1 (NW). I have connected the portal to BW (3.0B) system and able to create BW Report iViews for the connected BW System. However, these
iViews work only with the Administrator login. When I create a user with assigning just the role created for the BW iView reports and try to access the BW iViews, I get the error message "Unable to lookup System 'Cel_DBW010'. Please check the system object and the alias..". I have created the BW System DBW010 and an alias Cel_DBW010. Have created a role and done appropriate user mapping. Connection Test goes through successfully and iViews work fine as expected, but just in administrator login. Any help would be appretiated.
-Sudheer

Hi,
go to the system landscape in your portal, right-click your system and edit the permissions.
Your user must have a role that is listed there with read-permission!
Usually, the every_user (or 'Everyone') role is listed there with read permission, so your user should have the every_user role as well.
Hope this helps,
Karsten

Similar Messages

Unable to lookup System ...check the system object and the alias

Hi,
I am working on EP6 Sp 9. I have created iviews and integrated j2ee application by appIntegartor . everything is working fine . but these iviews are working only with superadmin role . with any other role am getting the error message "Unable to lookup System 'NNNJ2ee'. Please check the system object and the alias.."
Have created a role and done appropriate user mapping. Connection Test goes through successfully and iViews work fine as expected, but just in administrator login.
i found a a thread dissucing about the same problem in this forum and followed the solution given by them(assigning eu_role to the user) .
But still it is not working for me.
can anyone please help me in finding the solution .
Thanks,
Lakshmi

Hi,
The cause is :
When you create an item with the 'super admin role' user's , you don't have the role : 'eu_role' assigned.
So when you create a new item the role 'eu_role' is not spread to end user.
The solution is :
First add the 'eu_role' to the super admin user. For all next item created it's work fine.
For item already created,
- right click on the object, Select open permissions.
- In the display option, choose Permissions
- Search for role : 'eu_role'
- Add the permissions
- check the box 'End User'
- Save
- And test
For me it's work fine. Let me know if it's good for you...
Regards
Alain Chanemouga @ SAP

Unable to lookup System object and the alias..

Hello All,
I am implementing the Business Package for CRM.
I have created the SAP_CRM and SAP_BW systems and assigned them the same aliases as mentioned in the instructions in http://help.sap.com/saphelp_crm40/helpdata/en/11/0584016208bc4988c3791d6213b6d0/content.htm
I have tested the connections to the WAS, as well as ITS server after configuring them from the portal system administration.
However, I get the exception.
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
Unable to lookup System 'SAP_CRM'. Please check the system object and the alias..
The error in the log is as follows:
#1.5#00112FCBC32C005E000000A9000007EC000412303370C08B#1145898137593#com.sap.portal.sapapplication#sap.com/irj#com.sap.portal.sapapplication#user1#95##LABNW_J2E_19311950#user1#15374a50d3b411da8f1e00112fcbc32c#SAPEngine_Application_Thread[impl:3]_36##0#0#Error#1#/System/Server#Plain###ApplicationIntegratorException: com.sapportals.portal.appintegrator.ApplicationIntegratorException: Unable to lookup System &\#39;SAP_CRM&\#39;.
Please check the system object and the alias.com.sapportals.portal.appintegrator.ApplicationIntegratorException: Unable to lookup System &\#39;SAP_CRM&\#39;.
Please check the system object and the alias.
 at com.sapportals.portal.appintegrator.layer.SingleSignOnLayer.getSystemLogonMethod(SingleSignOnLayer.java:243)
 at com.sapportals.portal.appintegrator.layer.SingleSignOnLayer.processLayer(SingleSignOnLayer.java:55)
 at com.sapportals.portal.appintegrator.LayerProcessor.processActionPass(LayerProcessor.java:173)
 at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doOnPOMReady(AbstractIntegratorComponent.java:71)
 at com.sapportals.portal.prt.component.AbstractPortalComponent.handleEvent(AbstractPortalComponent.java:396)
 at com.sapportals.portal.prt.pom.ComponentNode.handleEvent(ComponentNode.java:252)
 at com.sapportals.portal.prt.pom.PortalNode.fireEventOnNode(PortalNode.java:369)
 at com.sapportals.portal.prt.pom.PortalNode.processEventQueue(PortalNode.java:800)
Any hints recommendations for the same.
Thank You.
Sumit.

Hi Sumit,
System is an object in Portal Content Directory (PCD). User of portal should have permissions to access it. Looking up is a kind of access.
Please go to System Administration -> System Configuration -> System Landscape. Find your system and right-click on it, then choose 'Permissions'. There you should make sure that your portal user has permissions.
You can read about permissions here:<a href="http://help.sap.com/saphelp_nw04/helpdata/en/f6/2604e505fd11d7b84200047582c9f7/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/f6/2604e505fd11d7b84200047582c9f7/frameset.htm</a>
There is an extract probably related to your problem:
" If an iView is based on a system object defined in your system landscape (see System Landscape), you must assign end user permission for the relevant user, group, or role to the system object, as well. End user permission assigned to a system permits the iView to retrieve data from the respective back-end application through the system object at runtime."
Regards,
Sergei
Message was edited by: Sergei Dneprov

Unable to lookup System 'SAP_WebDynpro_XSS'. Please check the system object

Hi Guru,
I have problem on Configuration EP 6 SP 19, it i'm already configure 4 system alias is
a. SAP_BSR_EREC
b. SAP_R3_financials
c. SAP_WebDynpro_XSS
d. SAP_ITS_EBU
but can message error is
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
Unable to lookup System 'SAP_WebDynpro_XSS'. Please check the system object and the alias..
See the details for the exception ID in the log file
could your help me.....
thanks,
Apri

Hi Apri,
Read over this document...
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00bfbf7c-7aa1-2910-6b9e-94f4b1d320e1
Pay particular attention to the section called "Setting Permissions to Portal Content". To make permissions changes, you'll go to System Administration -> Permissions. The document spells it out well.
Generally speaking, if you've got your system object aliased correctly you should not have a problem. However, if the permissions on this system object (or the folder in which it lives) are too restrictive, users won't be able to find the system object and you'll get this error message.
Give it a shot and let us know.
-Kevin

Error- Unable to lookup in the system.

Dear All,
For my backend server I have created system object on portal.
Then I have made 1 transaction iview for the same system object.
In the preview of the iview it is showing me correct screen and its operations are also fine.
But when I am attaching that iview to ane role and attaching that role to any user and viewing that iview thru tht users login it is giving me an error
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
Unable to lookup System 'TEST'. Please check the system object and the alias..
See the details for the exception ID in the log file
Can anyone guide me in the above issue ?
Regards,
Aditya

Hi All,
While checking the permissions under SAP Authorizations it is giving me an error
classcom.sapportals.connector.connection.ConnectionFailed ExceptionConnection Failed: Nested Exception. Failed to get connection.
I have check all the parameters under connector property also
they are fine.
One more thing if this role I attched to administrator account it is working properly.But for normal user it is giving the run time error as mentioned above.
Please anyone help me out in this situation.
Regards,
Aditya

Unable to lookp system in ESS

Hi,
I am trying to configure ESS in EP 6.0 . I am getting the following error.
What am i supposed to do. I had created a system to connect to R/3 .How am i supposed to proceed after this.
Any suggestions !
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
Unable to lookup System 'SAP_R3_Financials'. Please check the system object and the alias..
See the details for the exception ID in the log file
Any links giving details of the whole configuration !?
Regards
Bharathwaj

HI Bharathwaj
Have you given the system alias as SAP_R3_Financials.
Check whether the connections tests are working properly, if not it is the problem with the system creation.
Regards
Rajeev.

Error 485680 reservation warning(node_join) - Unable to lookup local_only f

SETUP
3xT5220
1xStorageTek 2540 FC RAID
SC 3.2
OS 10 Patchlevel 137111-08
Two of the 3 cluster nodes are directly connected to the RAID.
Multipathing enabled on all cluster nodes (stmsboot -e).
PROBLEM
On the node, which was added to an already established cluster as the third node, that is NOT connected to the RAID, I'm seeing hte following messages:
Cluster.CCR: [ID 485680 daemon.warning] reservation warning(node_join) - Unable to lookup local_only flag for device dsk/d10.
Cluster.CCR: [ID 485680 daemon.warning] reservation warning(node_join) - Unable to lookup local_only flag for device dsk/d9
svc.startd[8]: [ID 652011 daemon.warning] svc:/system/cluster/globaldevices:default: Method "/usr/cluster/lib/svc/method/globaldevices start" failed with exit status 96.
with exit status 96.
svc.startd[8]: [ID 748625 daemon.error] system/cluster/globaldevices:default misconfigured: transitioned to maintenance (see 'svcs -xv' for details)
Cluster.CCR: [ID 916112 daemon.error] /usr/cluster/bin/scgdevs: Filesystem /global/.devices/node@3 is not available in /etc/mnttab.
# svcs -xv
svc:/system/cluster/globaldevices:default (Suncluster globaldevices service)
State: maintenance since January 12, 2009 2:38:26 PM EST
Reason: Start method exited with $SMF_EXIT_ERR_CONFIG.
   See: http://sun.com/msg/SMF-8000-KS
   See: /var/svc/log/system-cluster-globaldevices:default.log
Impact: 3 dependent services are not running:
        svc:/system/cluster/mountgfs:default
        svc:/system/cluster/clusterdata:default
        svc:/system/cluster/ql_rgm:default
svc:/system/cluster/scsymon-srv:default (Sun Cluster SyMON Server Daemon)
State: maintenance since January 12, 2009 2:38:41 PM EST
Reason: Start method exited with $SMF_EXIT_ERR_CONFIG.
   See: http://sun.com/msg/SMF-8000-KS
   See: /var/svc/log/system-cluster-scsymon-srv:default.log
Impact: This service is not running.
# cat /var/svc/log/system-cluster-globaldevices:default.log
[ Jan 12 02:37:52 Disabled. ]
[ Jan 12 02:37:53 Rereading configuration. ]
[ Jan 12 02:47:55 Rereading configuration. ]
[ Jan 12 02:48:28 Enabled. ]
[ Jan 12 02:49:07 Executing start method ("/usr/cluster/lib/svc/method/globaldevices start") ]
[ Jan 12 02:49:10 Method "start" exited with status 96 ]
[ Jan 12 06:14:43 Executing start method ("/usr/cluster/lib/svc/method/globaldevices start") ]
[ Jan 12 06:14:46 Method "start" exited with status 96 ]
[ Jan 12 09:50:26 Executing start method ("/usr/cluster/lib/svc/method/globaldevices start") ]
[ Jan 12 09:50:34 Method "start" exited with status 96 ]
[ Jan 12 13:17:27 Executing start method ("/usr/cluster/lib/svc/method/globaldevices start") ]
[ Jan 12 13:17:30 Method "start" exited with status 96 ]
[ Jan 12 14:28:54 Executing start method ("/usr/cluster/lib/svc/method/globaldevices start") ]
[ Jan 12 14:29:02 Method "start" exited with status 96 ]
[ Jan 12 14:38:23 Executing start method ("/usr/cluster/lib/svc/method/globaldevices start") ]
[ Jan 12 14:38:26 Method "start" exited with status 96 ]This prevents my scalable resource group from coming online on the third cluster node.
From the cluster error message guide:
+485680 reservation warning(%s) - Unable to lookup local_only flag for device %s.+
Description: The device fencing program was unable to determine if the specified device is marked as local_only. This device will be treated as a non- local_only device and nodes not within the cluster will be fenced from it.
Solution: If the device in question is marked marked as local_only and is being used as the boot device or the mirror of a boot device for a node, then that node may be unable to access this device and hence, unable to boot. Contact your authorized Sun service provider to determine whether a workaround or patch is available.
Any idea what's going on or how to prevent it?

I have isolated the issue to ssh and the login window. I can use these same administrator credentials to initiate ARD sessions, configure the server via Server admin or WGM, authenticate to perform privileged finder operations.
restarts do not change anything.
per a related post, but not identical investigated /var/db/dslocal/nodes/Default/config/ I only had one of the referenced files, not the several hundred those posters seemed to have. I made a backup, and removed it, followed by a restart. There was no effect.
I opened Server Admin, and turned off ssh, verified that remote login was not checked in System Preferences. Logged out, no effect, restarted again no effect.
There is no joy with trying Local Administrator.
This is a clean 10.5.4 Install (Monday, August 3) DNS works per Anthony Rocco's setup instructions and verification methods. DNS was working prior to upgrading to OD Master. Kerberos logins worked properly. I was going through and setting up share points and setting ACLs when I realized I lost access.
I would take any suggestions people might have...
thanks,
Ion

Unable to lookup the Deploy Service. java.lang.ClassCastException in NWDS

Hi All,
I am getting the following exception while deploying an application in NWDS.
Please help me in resolving this issue
Sep 6, 2007 10:24:32 PM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] ERROR:
[001]Deployment aborted
Settings
SDM host : bala
SDM port : 50018
URL to deploy : file:/C:/DOCUME1/BALU/LOCALS1/Temp/temp64339RFCFlightList.ear
Result
=> deployment aborted : file:/C:/DOCUME1/BALU/LOCALS1/Temp/temp64339RFCFlightList.ear
Aborted: development component 'RFCFlightList'/'local'/'LOKAL'/'0.2007.09.06.22.24.23'/'0':
Caught exception during application deployment from SAP J2EE Engine's deploy API:
com.sap.engine.deploy.manager.DeployManagerException: Unable to lookup the Deploy Service. java.lang.ClassCastException
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).DMEXC)
Deployment exception : The deployment of at least one item aborted

Hi Bala
Some of the services at your server are not running..ask your system admin to restart the SDN server and try to deploy once
Regards
Chaitanya.A

Webmehods unable to lookup IDOC in SAP

Hi
We have some IDOCS in SAP.
Webmethods is talking to SAP and looking up these IDOCS.
However it is unable to lookup all the IDOCS.
We are using ECC6 system.
On further observation we've observed that IDOCS with release 4.6 are lookedup by Webmethods but IDOCS with release 700 ae not looked up.
What is the reason for this?
This is the error message that Webmethods gets
[SAP.108.9351] WmSAP Adapter: Could not find IDoc "ORDERS05.ZGSLSITE_CO(700)
Rergards
Dexter

HI,
ORDERS05.ZGSLSITE_CO looks like a custom Messagetype.
Maybe you have the wrong Messagetype or reimport the Metadato for ORDERS05.ZGSLSITE_CO.
Regards,
Gordon

Unable to lookup home: Path to object does not exist at : java:comp#

Hallo,
I do not understand why I am getting the exception:
Unable to lookup home: Path to object does not exist at : java:comp#
if i have defined in the ejb-j2ee-engine.xml the jndi name:
<enterprise-beans>
 <enterprise-bean>
 <ejb-name>MyConverterBean</ejb-name>
 <jndi-name>MyConverterBean</jndi-name>
 <session-props/>
 </enterprise-bean>
</enterprise-beans>
and in the ejb-jar.xml :
<enterprise-beans>
 <session>
 <description>the converter bean</description>
 <display-name>MyConverter</display-name>
 <ejb-name>MyConverterBean</ejb-name>
 <home>converter.MyConverterHome</home>
 <remote>converter.MyConverter</remote>
 <local-home>converter.MyConverterLocalHome</local-home>
 <local>converter.MyConverterLocal</local>
 <ejb-class>converter.MyConverterBean</ejb-class>
 <session-type>Stateless</session-type>
 <transaction-type>Container</transaction-type>
 </session>
</enterprise-beans>
I am creating the EJB in this way:
ic = new InitialContext();
objRef = ic.lookup("java:comp/env/ejb/MyConverter");
home = (MyConverterHome)PortableRemoteObject.narrow(objRef, MyConverterHome.class);
converter = home.create();
I checked in the Administrator tool under JDNI / ejbContext and I can see MyConverterBean in the list.
Do you have any idea what I am doing wrong?
thanks a lot for your help,
SAPLernen

Hi Vladimir,
do you have some example or tutorial of how can i implement java proxies from a java stand alone application.
i allready make everyting but i'm still having problem.
this line give me a null
queryOutLocalHome = (UsersSyncMI_PortTypeLocalHome)ctx.lookup("java:comp/env/ejb/UsersSyncMI_PortTypeBean");
this is my java class that invoke my ejb java proxy
package com.gsk.xi.demo;
import java.util.Properties;
import javax.naming.Context;
import javax.naming.InitialContext;
import com.sap.aii.proxy.xiruntime.core.MessageSpecifier;
public class InvokeProxy {
 private Object objRef = null;
 private InitialContext ic = null;
 public String getRole(String name, String pwd){
 String role="0";
 UsersSyncMI_PortTypeLocalHome queryOutLocalHome=null;
 UsersSyncMI_PortTypeLocal queryOutLocal=null;
 try{
 Context ctx = null;
 Object ref = null;
 Properties p = new Properties();
 p.put(Context.INITIAL_CONTEXT_FACTORY,"com.sap.engine.services.jndi.InitialContextFactoryImpl");
 p.put(Context.PROVIDER_URL, "buasapp012.gwamericas.corpnet1.com:50004");
 p.put(Context.SECURITY_PRINCIPAL, "J2EE_ADMIN");
 p.put(Context.SECURITY_CREDENTIALS, "was1234");
 ctx = new InitialContext();
 //objRef = ic.lookup("java:comp/env/ejb/UsersSyncMI_PortTypeBean");
 //queryOutLocalHome = (UsersSyncMI_PortTypeLocalHome)PortableRemoteObject.narrow(objRef, UsersSyncMI_PortTypeLocalHome.class);
 queryOutLocalHome = (UsersSyncMI_PortTypeLocalHome)ctx.lookup("java:comp/env/ejb/UsersSyncMI_PortTypeBean");
 queryOutLocal = queryOutLocalHome.create();
 MessageSpecifier msg = queryOutLocal.$messageSpecifier();
 msg.setSenderService("JAVA");
 queryOutLocal.$messageSpecifier(msg);
 UserDT_Type reqtype = new UserDT_Type();
 reqtype.setUsername(name);
 reqtype.setPassword(pwd);
 UsersDBMTResponse_Type response = new UsersDBMTResponse_Type();
 response = queryOutLocal.usersSyncMI(reqtype);
 role = role + response.getStatementResponse().getRow().getRole();
 catch(Exception ex){
 System.out.println(ex.getMessage());
 return role;
} //end of class
thanks for your time
Lionel

Printing - Unable to lookup host message

Hello. I have a powermac dual 2.0 G5 which is connected to my HP all-in-one 2610xi by a usb cable. I am sharing this printer using the printer sharing in system preferences. I am sharing it wirelessly via the airport card with my G4 titanium powernbook. The powermac is running tiger and the powerbook is running 10.3.9. All of a sudden, when I try to print over the wireless network I get the message "Unable to lookup host" in the print dialogue box. I'm pretty sure that I recently installed the latest update on the powermac so I think that may have done it. Any suggestions on how to deal with this problem. I have already deleted and re-installed the printers/drivers on both computers and repaired permissions on the powerbook. I know the laptop is connecting because I am also sharing my internet connection which is working. Help please!

Thanks

Unable to open System Preferences

I am unable to open Systems Preferences on my MacBook Pro. I click on Systems Preference in the Apple Menus and it flashes but does not open. Thanks.

By Apple Menus, I mean the Apple symbol on the top left. Then I select "system preference" and click on this. It does not open.
I see thanks for explaining.
Where do I find the Applications - System Preferences? I thought this was it. Thank you for your response.
Open a Finder Window and you should see a folder called Applications or using your Dock click on Applications (probably on the far right of the Dock).
BTW did you try restarting your computer? That helps in many situations like this.

Unable to open SYSTEM PROFILER

Hi all,
I updated my software to 10.5.8.
Since then i'm unable to open system profiler.
Tried using the:
a) option button > then click system profiler
b) spotlight
c) apple logo > abt this mac>
Please help.
Many thanks in advance

HI,
Try deleting this file.
com.apple.systemprofiler.plist
~/Library/Preferences.
Move that file to the Trash then try to launch the System Profiler.
If that doesn't work you could perform an Archive & Install which would reinstall a new copy of the Mac OS X for you which would install the System Profiler app.
As with any installation, make sure and back up all important data first.
http://support.apple.com/kb/HT1545
Then repair disk permissions...
Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
Carolyn

Unable to Open System Prefrences

Hey Guys ,
Im unable to open system preferences on my mac.The problem started 2 days ago.
-I've tried selecting system preferences by clicking the apple logo on the top left corner of my mac.
-I've also tried opening system preferences by selecting Bluetooth preferences & Network Preferences
when i attempt any of the above methods..Nothing opens at all.Nothing opens on the dock nor does any window open
I tried Switching off my mac and Switching it on holding "command","option","r" & "p" but that didnt help.
-system preferences doesn't showup when i try searching for it in Spotlight.
Im using an Early 2008 MBP and am running Mac OS 10.6.6 ( snow leopard) 250 GB HD and 2 GB RAM
Any ideas and any help at all in the matter would be much appreciated
Thanks in Advance,
Thimayya

Look in your Applications folder. Is it there?

Unable to see system variable no in sap b1 due to watch

Dear Sir,
In SAP B1
I am generating report Customer Aging Report.
In PLD Customer Code is displaying buy i am unable to display customer name in PLD because when i am unable to see
system variable number.
The watch cover that variable no. how can i find system variable no.
is there any other method to see system variable no.

Hi,
what you are seeing in system-> status is not the installation number that is the status of your system's SAP License
when you have not installed the license properly after the installation, it shows the status as initial
go to SM51
there you can find the instance number along with the Hostname_SID_InstNumber of your server
thanks and regards
Abdul Hadi

Unable to lookup System

Similar Messages

Maybe you are looking for