Unable to maintain price in Quotation - ME47

Hi Gurus,
I am trying to maintain the price in quotation - ME47.
However, the price field is grayed out as such..
Could someone help me on this regarding the settings and the process of this.
Best Regards
Sudhi

Hi,
Please check the field selection for ME47 in the path: OLME - RFQ/Quotation - Define Screen Layout at Document Level. Here, go to details of the field selection key ME47 and go to "Quantity and Price". Check whether the price and price unit are maintained correctly as shown below.
Regards,
AKPT

Similar Messages

Using gross price instead of net price at Quotation

Hi,
I'm working at a company that just bought SAP ERP ECC 6.0. Our consultants told us that SAP only works with Net price in MM. It sounds a little bit weird for us, because here in Brazil we usually use Gross price in all our transactions.
Here in Brazil we have some taxes that are included in gross price and it's a hard work ask the final user to calculate the taxes out of SAP and input net Price in the system.
I read a little bit some documentation provided by SAP at Internet called SAP Library and I found an article titled:Entering a Quotation Against an RFQ
In this article says the following: " You enter the net price per unit in the Net price field. This price includes the vendor's normal discounts and surcharges only. Cash discounts (for prompt payment) and taxes (e.g. value-added tax) are calculated separately.
You enter the gross price in the Net price field, and maintain the conditions for the item. Then the system automatically replaces the entered gross price with the calculated net price (see Maintaining Conditions)."
As we can see, there are two ways to input the price. Gross price and Net price. I'd like to know if is there the possibility to configure the "mentioned conditions" for a group material and at the moment I type the gross price in Quotation the system automatically calculate the net price?
Our consultant told us that this procedure should be done for each item in quotation, in my opinion I guess that SAP can link the applicable taxes for the material based on its group material. If something like that is possible, our daily work will be simplified so much because the system will know the taxes that should be discounted for the material and calculate automatically the net price.
If this possibility exists, could you please tell me in technique terms (transactions) that should be set?
Another question is about Taxable Income, is there any place in SAP where I can configure the Taxable Income for a material or group material for the taxes set at "mentioned conditions"?
Thanks in advance,
Sorry about my English.
Best Regards,
Amorim, Rodrigo.

What you need is a new pricing procedure design to fit your requirements. The standard pricing procedure allows you to enter the net price. Then the gross price is calculated after taking into account the discounts, taxes etc. These discounts and taxes can be designed to determined automatically through material group also. So to achieve your requirement the pricing procedure has to be changed accordingly to calculate the net price from gross price entered. While this can be done, but all other impacts on pricing reports and accounting document posting with correce valuation price etc. have to be tested in detail.

Is it possible to maintain Price list maintaining concept in PR_PO

Dear Friends,
How to map following scenario in SAP
1) i wants to make PR , what ever item i will select in PR its price should come in PR. i will maintain it some where( i dont know where it should maintain).because i wants this price should come in PO in PB00 or PBXX.
This is something like Price list maintaing like comcept. Means i will maintain these priceses some where for material and it will come fron PR to PO and i will make PO on this price and if required i will overwrite this.
I dont wants here Valuation price under valuation tab which is comming form accounting data 1
Regards,
Mahesh.

Hi
try this
create info record for material ,vendor and plant in t-code ME11 and maintain price there it will come in PO
Regards
kailas Ugale

I am unable to maintain global settings in spend analytics UI,

Dear spend Analytics experts,
I am unable to maintain global settings in spend analytics UI,
Also I understood from the spend analytics material that the standard templates should be available as part of standard templates.
To give more info I follow data source methods from ECC to BI load data, the data is in BI now.. and also have maintained the table settings in BI (OPM_SOURCES)
In spend analytics UI I could see the data source quires as measures , dimensions but in data managements (global settings and template administration) unable to figure out what is the issues.
Pls let me know how do I get standard template in Spend analytics UI.?
Also let me know if u need more info to understand my issues, I really appreciate your help u2026
Rgds,
Raj

Thanks Rohit for your reply, sure i will check all the listed web services as you mentioned..
coming to datasurces config , I follow the process which is there in material to generate data sources.
FYI I have scheduled the data loads to BI until PSA.. its successfully loaded but still have to validate the data, I assume that we
have to load data until PSA, then use perform data load process form SPM UI.? Correct me if I am wrong?
.. Here is the list of datasource I have generated and replicated to BI
Z_SADSERPBUDGETS
Z_SADSERPBUYER
Z_SADSERPBUYINGORG
Z_SADSERPCATEGORY
Z_SADSERPCONTRACT
Z_SADSERPCOSTCENTER
Z_SADSERPGLACCOUNT
Z_SADSERPIVBSAK
Z_SADSERPIVBSIK
Z_SADSERPMGMTORG
Z_SADSERPPO
Z_SADSERPPRODUCT
Z_SADSERPSAGREEMENT
Z_SADSERPSITE
Z_SADSERPSLINE
Z_SADSERPSTDPRICE
Z_SADSERPSUPPLIER
Z_SADSERPTCURF
Z_SADSERPTCURR
Z_SADSERPTCURV
Z_SADSERPUOM
Regards,
Raj

GRN Without Maintaining Price in Material Master

Hi Experts,
We have activated the Split Valuation in Material Master and also put restriction in PO that without price maintaining in material user can not raise the PO.
Is there any option that we can prepare the PO or GRN without maintaining price in material master and system should pickup the price from PO itself to update the MAP.
Regards,
Manish Jain

Hi,
Naturally system will update the MAP after GRN and if your PO has info update indicator on in material TABof itee detail system
the price will be suggested as your PO price next ime when you create Order.
Regards

Maintaining Price Record for Different Stores and Distribution Centers

Hi expert
I want to maintain price condition record for condition type ZPR0 for one article
for different store and different Distribution Center
what is t.code and path
if sales price should copy from purchase price what are setting
thanks

Hi Hanumant,
To do sales pricing
Goto IMG>Sales & Distribution>Basic Functions>Pricing>Pricing Control
1. Use condition table 406 Site/article
2. Define Access Sequences ZPR0
    Enter accesses:10 406 Site/article Exclusive x
3. Define Condition Types (ZPR0 assign newly defined access sequence)
4. Define And Assign Pricing Procedures (assign condition types ZPR0..etc. to it)
Then maintain condition record , go to VK11 --> Enter your Z condition type (eg. ZPR0)., enter the amounts.
Add the pricing procedure , to sales document type.
For Retail Sales Pricing based on Purchase pricing you can follow the following method:
The retail price is always based on the purchase net/net price. This purchase net price is built up from the purchasing pricing elements or condition types defined to be included in the purchase net price. A planned mark-up is applied to the purchase net/net to calculate the proposed retail price. The planned mark-up can be set by merchandise category and for exceptions, more specifically by article.
You can perform Two-step calculation for retail pricing, for example, for stores that are supplied by a distribution center (internal vendor). Calculating sales prices for the stores is based on the transfer price for distribution centers (preceding organizational unit).
1. Set up Master Data (WB02) - Relevant Fields should be maintained
2. Set up Article Master Data - Logistics DC and Store View (MM42)
Relevant Fields should be maintained
3. Maintain Mark up for DC(VK11) -Markup % at Distribution channel distribution chain level
Mark ups maintained at two levels:
For DC: At distribution chain level
        Condition type used: AUFS
For Stores: At article level
     New condition type ZUFS created.
4. Maintain Mark up for Stores (VK11) Markup % at Store distribution chain level
5 Create Pricing Procedures (IMG) -Pricing Procedures created
6. Carry out Price calculation for DC(VKP5) - Pricing Document created - DC Transfer price calculated
7. Carry out Price calculation for Stores (VKP5) - Pricing Document created - Final Retail Price Calculated
The final retail price that is calculated is stored in the condition type VKP0.
Hope it helps,
Regards,
Anirban Roy

Error msg: ZFI999:Maintain price for the material 254600254 in plant 1000

Hi gurus
18.02.2009 i created one STO PO. but material price in the accounting view the price was "Zero" in plant 1000. In plant 2000 the price has already maintained.
But today i updated the material price like Rs 200/- through MR21 for plant 1000.
After that while i transport the material through MB1B (351 mvt type) plant 1000 to 2000, i got the following error msg.
"ZFI999:Maintain price for the material 254600254 in plant 1000".
Regards
Amsi

Hi Amsi
the message no is not standard i think there has been a new message created. please check with your ABAPer about the message.
just want some clarification. you are doing STO from plant 1000 to 2000. the price should be picked for that material maintained in plant 2000.
in case of queries please revert back
Adwait Bachuwar

Unable to update Price list

Dear all,
I am unable to update price list from
Inventry->Price List->price list->Pricelist A
geting no error.Update buton doesnt work.
I am using SAP B1 2007 PL :12 SP:00
Thank You
Ratish Pratihast

hi Raj
please also check if there is any coding done in relation to it also please check it in transitional notification.
Regards,
Manish

Idea Tab S2109 unable to maintain a stable wireless network connection

Can somebody tell why?
I have purchased 2 of S2109 .
1 is ok, everything all right.
the 2rd one , unable to maintain a stable network connection in wireless mode. 1 minutes at least disconnect 20 times.
AND, expecially when you open a website, immediate show that connection lost or disconnect.
Can tell me why, and how to resolve? Before i return back to Retail shop.
I hoped can settle from myside.
Moderator note; e-mail address removed to stop the spambots getting it

Hi
Welcome To Lenovo Community
We are really sorry to hear about the issue you are facing,
Based from what i read in your post, you should try performing factory reset for the system
Then again reconfigure the Wifi to check . Please refer below link for factory reset
Factory Reset - IdeaTab S2109A (S2109)
Do give this a try and let us know
Hope This Helps
Cheers!!!
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
How to send a private message? --> Check out this article.
English Community Deutsche Community Comunidad en Español

Maintain price lit for material

hi sir,
I am a ABAPER.
plz help me how can i maintain price lit for material for a customer.which t-code and condition type
i have to use..
Thanks,
sunil sahoo

Hi Sunil,
You can use T.Code VK11 to maintain price. you need to look into sales order pricing, which condition is missing. Generally standard condition is PR00.
Regards,
Naveed Ansari.

Unable to Edit Price Lists in Advanced Pricing Vision Instance

Hello I have a new Vision Instance for 12.1.3 and when I switch responsibility to Oracle Pricing Manager Vision Operations I am unable to edit and of the price lists or modifiers that are in the system by default. any suggestions on what I need to update as I have not run into this before in previous Vision instances

this was the solution to this issue
Solution
1. Be sure to set the following profile option values at user level
a. QP: Pricing Transaction Entity = ORDFUL and save.
b. QP: Source System Code to 'Oracle Pricing' (if not already) and save.
2. Responsibility: Order Management Super User (or equivalent)
3. Navigation: Pricing > Price Lists > Price List Setup
4. Open the price list: XYZ CHARGES
5. The form will now open without error, and changes will be accepted

Maintaining Price for BOM / Bom item with customer

Hi,
We are using BOM concept for SO, and price we are maintaining at item level like we have a FG material 9910    and it has BOM componenet as , A,B,C and we are maitaining price at item level for A,B, and C   now I want to maitain price at with BOM and customer
BOM : 9910
Item A,B,C
BOM : 9911
ITEM: A,B,C,D
Now our requirement is to maiatin price as   CUSTOMER / BOM Header material / BOM ITEM
sohow to make the condition table for my requirement, as MATNR field we can select only one time in table how to take MATNR of Header and MATNR for item.
regards,
zafar

Hi Prakash,
      Thanks for your reply it is a good link which u have send, but my requirement is not solve with the given link I want to maiatin price at item level for this in Main item item category I have maiatin LUMF and alll price at item level but my requirement is I want to maiatin price at item level only but refeence to Main Item
MEANS : I Hva emain item 9910. with item , 1.2.3 and i have another main item 9911 with sub items ,1,2,3,4 in such cases I want to maiatin price for sub items 1,2,3,4 but ref. to customer and Main item
CUSTOMER / MAIN ITEM / SUB ITEM
how to mainatin price in VK11 as per above requirement.
regards,
   zafar

Shall v maintain price control for material type with plant specific ?

Hai Guru,
In OMS2, we change HALB price control [valuation] as V or S. whether shall v maintain this for plant specific.?
Kindly guide
With Regards
Swetha

Hi
if you do not make the indicator Price control manadatory active then you can have different price indicator for each plant. However thsi indicator is never done plant specific. If you wish to have plant specific then you may have to have a new material type and again you need to control the MM01 creation for that particular plant by means of Authorisation control which is littel involved also but can be done.
Regards

How to maintain price for 100 units

Dear all i have question , i want to give pricing for conditin records in vk 11 for condition type for PR00 and the price should be calculated like for 100 units
eg: Material " X" Price is 700 for 100 units
how should i have to go and maintain in the condition records for 100 units should i have to maintain scales ? if yes how should i have to go and maintain in scales ?
Please guide me
thanks

Hi Kumi,
I agree with the above solution but if there is some restriction in the business like if the customer buy 1 to 99 units then the price will be 8 per unit.
If customer buy 100 units then the price will be 7 per unit (7*100=700).
Then you can use scale in the situation.
Hope it helps,
Regards,
MT
Edited by: M T on Mar 21, 2010 11:58 AM

Maintain price (change) in Shopping cart

Hi
We have in our catalog (CCM2.0) created some articles like fx Consulting. The price for consulting can be different and we like to change a dummy price when the article is transfered to catalog.
Do anyone know what we can do to make the price field maintainable in shopping cart?
Thanks in advance

Dear Jesper,
it is standard that the price from catalog item should not be changeable in the shopping cart. If you need this functionality then please take a look at consulting note 693175. Maybe this helps.
Best regards,
Georg

Unable to maintain price in Quotation - ME47

Similar Messages

Maybe you are looking for