Unable to maintain the tab active in dynpro
Dear Experts,
I have a normal screen '100' which has a tabstrip control 'TABSTRIP'. It has two tabs with two subscreens.
When I do some operation in the subscreen, PAI is getting triggered and the control is coming back to the normal screen 100.
I want the control to stay in the same subscreen.
I am not able to use
IF tabstrip-activetab IS INITIAL.
tabstrip-activetab = 'TAB2'. (TAB2 is the fct code of second tab)
ENDIF. in PBO of the main screen..
I have also declared CONTROLS: TABSTRIP TYPE TABSTRIP. globally in the main program.
The error message is "Statement "TABSTRIP-ACTIVETAB" is not defined. Check your spelling."
How do I overcome this??
Thanks and Regards,
Kawish
Hi everyone...thanks!!
I did check the read only issue first, and that wasn't it... and I made sure they were just text fields and never started out as radio buttons...
At one poin,t a bad param error popped up..... ah ha!!
So, I exported the file back to postscript (deleting all the fields first)
and then made new ones and it worked fine...
Must have been a corrupted file ;-)
Thanks for the help!!!!
babs
Similar Messages
-
Unable to view the tabs to assign points?
Hi,
I am unable to view the tabs to assign points for the answers I have received.
Please look into the matter...
Title: Confusion Related to New G/L?
Discussion Body:
Hi,
Management is thinking for implementing New G/L in my Company and we have to prepare the presentation for that. I am not sure of few points though I have searched already but unable to find out anything which clears my doubts which are as follows:
1) Can we implement new G/L In-house or do we have to get it done from external sources or SAP only?
2) Can we achieve IFRS and GAAP reporting through segment reporting in house or not. Does that require any other cost as we are already on ECC6.0 but new g/l is not activated?
3) Is it mandatory to get the Data Migration done from SAP or can we do it In-house as well?
4) If one knows the approx. cost if we get it done from external sources at each point on in total at all the above mentioned points?
5) Is it so that partially we can do it and partially we need to take the help of the external sources?
Please reply asap.
Thanks in advance...
Regards
NitinSome added toolbar and anti-virus add-ons are known to cause
Firefox issues. '''Disable All of them.'''
'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
While you are in safe mode;
Type '''about:preferences#advanced'''<Enter> in the address bar.
Under '''Advanced,''' Select '''General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites. Are there any problems? -
Why i am unable to catch the 'TAB' key press?
hi
i have an application where i have 2 text fields and one button in order say t1, t2 and b1.
on tabbing t1 cursor moves to t2 and on tabbing t2 cursor moves to b1 and on tabbing b1 cursor moves to t1.
now when i press tab button on any of the component i have written a keyListener for that to catch 'TAB' key using the comparision
if( e.getKeyCode() == KeyEvent.VK_TAB )
but its not catching the tab key pressed on any of these 3 components....
why like this...
i want to catch the press of 'TAB' key and write some action for it... but unable to catch the 'TAB' key press.
anyone could help me in this....
thanx in advance,
-SoniI seem to remember this question being asked before. I think the answer was that the FocusManager intercepts the TAB key. I don't remember the solution but you can try searching the forum.
-
I purchased a book called Activity-based costing for $3.99. I tried to open the file but it said my computer does not have IOS. I have a smartphone and I am unable to view the book. I am requesting since I am unable to use the book activity-base costing, a refund.
KevinI don't know what you are saying. How do I get my money refunded.
-
Hello, just got a new mini I pad, unable to open the tab to insert the sim card, pls help. thanks!
Okay I just updated the Graphics driver like it suggested in my system details part. No change.
-
Urgent : Unable to maintain the Number ranges for Excise Groups
Hi CIN experts............
In Development server I created 3 excise Groups (E2,E3 and E4), the same I was transported to Production.
J_1IRG23A1, J_1IRG23A2 object number ranges are Excise Group specific.
When I go to Tools - Number Ranges to maintain number range for J_1IRG23A1, J_1IRG23A2 objects I didn't find these excise groups.
Im able to see these Excise groups in Tools - Number ranges in Development server, but not in Production.
Can any one guide me something to resolving the issue ?
regards
Durga RamHello Nagaraju,
Can you please tell me the customozing path for maintaining the number ranges for PM log entries.
I require to mention customizing path in my document.
Puneet -
Unable to set the tab order in a form I am creating
Hello,
I have a form that I created a bunch of fields for. I did make some of the fields out of order, but was not concerned as I figured I would set the tab order as I have in the past.
However, for this set of fields, not mater what I do, and how many times I try to set the tab order manually, it skips over a bunch of fields. Even if I try to let acrobat automatically set the tab order, it still doesn't work.
These fields have been made from scratch as well as, copy and pasted to make sure their properties were all the same, other than a unique name. I can't figure this one out.
Has anyone ever had this happen to them before?
thanks!!
babsHi everyone...thanks!!
I did check the read only issue first, and that wasn't it... and I made sure they were just text fields and never started out as radio buttons...
At one poin,t a bad param error popped up..... ah ha!!
So, I exported the file back to postscript (deleting all the fields first)
and then made new ones and it worked fine...
Must have been a corrupted file ;-)
Thanks for the help!!!!
babs -
After loading FireFox 4 all worked OK for a while. Now when trying to change the tabs on left hand side (Home etc) or change selections on the apps (Weather or Calender) nothing happens. I am running iGoogle with FireFox 4 but this does not happen when trying the same thing with Explorer 9.
Having the same problem, but not only can't change tabs, but cannot open links on the page. I thought that by reducing my iGoogle page to one tab, and putting what content I could into app tabs that would solve most of the problems. It did some. For a while I was able to bypass this with the iGoogle Tab Remover add-on but it stopped working last night and I've not been able to get it working since.
-
Client unable to get the javax.activation.DataHandler object from Server
Hi All,
I am trying to download the file from the server to the client using Javax.Activation.Data Handler object with IBM web services. But server always returning the Data Handler object is null. I am wondering why it is behaving like this.
My requirement is add the file to the Data Handler object from the server and read the same from the client. But I am always getting Data Handler object is null at the client place.
Please see the client side code and server side code below.
Server side Code:
This is the simple web service method, its creating the Data Handler object and adding it to the Hash Map and returning the Hash Map object to the client.
public Hashtable download()
DataHandler dh = null;
HashMap hashMap =new HashMap();
try{
//Sample test files contains data
String downLoadFName="C:/ADP/downLoadData.txt";
//Creating the DataHandler Object with sample file
dh = new DataHandler(new FileDataSource(new File(downLoadFName)));
//Keeping the DataHandler object in the HashMap.
hashMap.put("DATAHANDLER",dh);
//keeping the sample test message object in the HashMap
hashMap.put("TEST","Keeping the DataHandler and test messages in the hashTable");
}catch(Exception e){
logger.error("Error :while sending the data:"+e.getMessage(), e);
//retrun the HashMap object to the client.
return hashMap;
Client Side Code:
This is the simple client code, and connecting to the server and invoking the web service method
//This is the client code,Just invoking the webservice method from the Webspehre server.
public class WebserviceClient {
static DocumentTransfer controller = null;
public static void main(String args[]){
DocumentTransferService service = null;
try{
//Creating the service Object
service = new DocumentTransferServiceLocator();
//Getting the Server connection
controller = (DocumentTransfer)service.getDocumentTransfer(new java.net.URL("http://localhost:9081/eNetsRuntimeEngine/services/DocumentTransfer"));
//Calling the download method from the server and it returns HashMap object.
HashMap hashMap = controller.download();
//Getting the DataHandler Object from the HashMap
DataHandler dh=(DataHandler)hashMap.get("DATAHANDLER");
System.out.println("DATAHANDLER: :"+dh);
//Getting the String object from the HashMap.
String message=(String)hashMap.get("TEST");
System.out.println(": :"+message);
}catch(Exception e){
System.out.println("Exception :Not able to get the file :"+e.getMessage());
Could you please give me some inputs on this?
Thanks in advance,
Sreeni.Hi Stif,
Thanks for your response.I did debug from server side,it has printing content of Data Handler properly.
Also i have debug request and response messages using TCP/IP monitor(RAD environment has this feature).The response from the server is going proplery.
But the client side Data Handler is coming null.
Any advice or solution would be greatly appreciated.
Thanks,
Sreeni. -
I have a hotmail address set up as a primary account in my Apple ID homepage only.
Any way to resolve this? Any help appreciatedThe email address that forms the username for your AppleID is irrelevant. It does not have to be accurate, working, or even in use by you. Software purchased with a specific AppleID must use that ID to update that software.
I don't know what happens when you change the old username for the AppleID.
Did you change the user name for th AppleID or did you get a new AppleID with your new email? -
Unable to see the "Password Reset" tab in Indentity Store (SAP IDM 7.1)
I am trying to implement Password self-service as per the document "SAP NewWeaver Idenitty Management Identity Center Self-service password reset Implementation Guide" Version 7.1 Rev 2. In this guide, references are made to the Password Reset Tab in the Identity Store properties view in Identity Center. I do not see that tab in my view.
I followed the standard inst guides during the upgrade. Its a fresh implementation and we are on IDM 7.1 SP5
I have checked out couple of similar posts where it was resolved by installing SP3/4, does anyone have any other solution than applying the SP again ??
What do I need to do to have that tab?
ThanksMatt,
Ours is a fresh installation
According to the PSS 7.1 V2 guide, i completed the section 1 where i creted the UME roles and the
Section 1: Creating the tasks
Creating the folder for the tasks
Creating the password reset task
Creating the password reset failed task
Then started the Section 2 Configuring the identity store and the first point the document says is "Select the identity store in the console tree and choose the "Password reset" tab: " which i am unable to see the tab in my system.
I am i missing some config steps here ? again i am just goin line - by - line what the doc says
Thanks
Edited by: Chetan on May 23, 2011 4:43 PM -
Is there a way to bring back the "Open a New Tab" option via right-clicking on the Tab?
I just upgraded to latest version of Firefox (6.0). Yesterday it informed me that an upgrade to Firefox 5.(something) was available and asked if I wanted to upgrade. I went for it. However, I hadn't used it since then till today. Now when I opened it today it asked me if I wanted to upgrade to version 6.0. Without hesitation, I went for it too.
While this version looks nice, it feels a bit odd to use it. Previously whenever I wanted to open a new Tab, I right-clicked on any of the Tabs (active tab or any other Tab) and after right-clicking, it had the option to '''''Open a New Tab''''' along with few other options. Now there's no such option. There's the + button to open a new tab, but what if I want to open a link in a new tab by right-clicking on it? Similarly the option to Open in New Window is also missing.
Is there a way to bring back those previous Tab options/settings? If yes, how?
P.S. In my bookmark toolbar, when I click on a bookmark icon, it has the same options/settings as it previously had in the last version I used (last version I used was 3.something; while I'd upgraded to version 5.something I hadn't used it except for opening the browser when it asked me to upgrade to version 6.0). Options on right clicking the bookmark icon are:
Open
Open in a New Tab
Open in a New Window
New Bookmark...
New Folder...
New Separator
Cut
Copy
Paste
Delete
Properties
I'd also like to mention here that I know of the shortcut keys; so please don't waste your time by trying to help me that way. Thanks.No. The Tab bar is a regular toolbar in current Firefox versions, so you get the normal right-click context menu of a toolbar if you right-click the tab bar.
You can double click on empty space on the tab bar to open a new tab if you do not want to use the new tab button.<br />
You can drag a link on that new tab button to open that link in a new tab.<br />
You can also drag the new tab button on another toolbar if you would like that better.<br />
Open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout"<br /> -
Hi there, every now and then when i maximixe or minimize a window. The top of the window is above the screen so I am unable to see the tabs or anything above the address bar, is the a way to minimize using the menu, or a configuration file I can alter to stop it going above the top of the screen. It's a pain having to restart the system / firfox when you have a handfull of tabs open while researching and then having to remember which sites you had open to reopen them. thanks
Use the F11 key or move the mouse pointer to the top of the screen.
I am using Ubuntu 12.0.4 with various versions of Firefox installed, I think that works with them all.
* [[Keyboard shortcuts - Perform common Firefox tasks quickly#w_miscellaneous]]_miscellaneous -
Make the tabbed page come back to same page after delete
I have a page with three tabs.
When user clicks on delete on any of the page. A warning page comes. And after the user selects yes or no on the warning page,
original page is displayed. But it goes to the first tab always. i want to maintain the tab also.
How can i do that?
I have used setForwardUrl to move between pages...Hi,
When delete event is fired, in PFR capture the selected tab details
tabBean.getSelectedIndex(pageContext);
store it in session
then
forward it to warning/dialog page
post the warning page results to calling page
in the process form request of calling page capture the event
use
tabBean.setSelectedIndex(pageContext,value)
value get it from session
pageContext.getSessionValue() API
Regards
ivar -
How to maintain the entries using table maintanance??
Hi,
I have created a Ztable. and I have created table maintanance generator, then attached the table to a
Tcode. but I am unable to maintain the entries in table maintanance??
Can anyone help me out
Regards
DeviHi this will help u.
Hi,
Go to SE11 enter table name ->change
Utilities-> Table Maintenance Generator
delete the Table maintenance by pressing delete button on menu,
then start creating it again.
Enter Auth.Group as &NC&
Enter function group < some name>
Maintenance Type -> One step
Overview screen -> some Number (1 or 2)
Press create
enter dev class and save, activate.
Go to SM 30 and check again.
Reward if useful
Regards,
Hema Sundara.
Maybe you are looking for
-
I cannot find the oil paint filter anymore in the recent version, it is not hidden in the paint galleries. I hope that Adobe did include it otherwise i cant use the updates anymore....
-
Using "Route" activity in process flow
Hi, I have a situation where I want to run one of two maps, depending on how many rows are in a particular table, i.e. something like: If table X rowcount > 100000 then run map A else run map B What's the most straight forward way to set this up in a
-
Unable to include VARI table in "Tables Excluded from REORG" No Edit options
I am trying to remove the table VARI from the automatic reorg in the dbacockpit. Steps followed : -> Configuration -> Automatic Maintenance -> Automatic REORG -> Tables Excluded from REORG Issue : Unable to include VARI table in "Tables Excluded from
-
TS4006 Using "find my iphone" on my computer
I've downloaded "find my iphone" on my computer but when I click on the app, it does nothing. What am I doing wrong? I've tried opening it when I click on the app window, and the icon.
-
Daily view displays recurring one day events for 2 days.
There are a number of recurring all day events (birthdays for example). From a browser accessing a group Wiki calendar, the daily view will display the event on BOTH the day it's scheduled for and on the next day as well. The views for week and month