Unable to make a DVD from a book I have made in I-photo 09

Hi.
I have just loaded i-life 09 and seem unable to make a dvd of books I have made in I-photo.
This was a straight forward process with i-photo 08.
It is as if it tries to pull one image only from the album.
I generally make the book up, go to Share... click Send to I-dvd, and then it all loads up from there.
I then create the finished dvd, of the book already made.
This does not happen now.
It tries to up load and comes up with preparing or sending to I dvd, but does nothing from that point, where it used to before.
I can only think it is a glitch with i life 09.
Is there a fix out there!!
Thanks in advance.

I can't answer your question, but maybe you can help me as you say it is easy to transfer an iphoto08 slideshow to idvd and burn it. I transferred the slide show OK and its name appeared on the idvd main page but when I selected it and burned it I got only a burn of the default first idvd page with the rotating theme and the name of my slideshow on it! The slideshow did look correct when I doubleclicked on it and it played in Preview. How do i get it to burn?

Similar Messages

How do I make a DVD from a video I have in iMovie?

I have a video that I shot using a Sony Handycam and imported to iMovie. Problem is, I want to make a DVD and don't know how to proceed. I have a Macbook Pro that I got new last year and only have the s/w that came with it.

Here is a user tip that lays out your options.
https://discussions.apple.com/docs/DOC-3711

HT1918 I'm unable to make iTune purchases from my phone using my iTune gift card

I'm unable to make iTune purchases from my phone using my iTune gift card, the gift card information is entered on the phone and I can see the credit amount.

I am having the same problem and it is REALLY frustrating.
Exact setup that you have, COMCAST, PayPal, etc....
I have reviewed my account three times with my PayPal info and received confirmation from my PayPal Account but it still won't let me log in. Let me know if you hear anything.
This is a REAL PAIN.
Andy

Trying to make a dvd from a project and this error message appears .The project could not be prepared for publishing because an error occurred. (-2125)

Trying to make a dvd from a project and this error message appears .The project could not be prepared for publishing because an error occurred. (-2125)

Hi
Error -2125
OK Error code - 2125 usually indicates that the movie is to large.
It use to pop up when going to iDVD !
iDVD - DO NOT CARE ABOUT Gbs at all. I got movies on 500Mb that do not fit and 50Gb that fits nicely.
iDVD - ONLY CARES ABOUT - Duration. Duration is Movie time + MENU TIME. Choice of
menu and animation of this can take lost of "DURATION" 15 minutes or even more.
Choice of encoding method and use of SL or DL DVDs determine the DVD limit.
iDVD 08 & 09 & 11 has three levels of qualities.
iDVD 6 has the two last ones
• Professional Quality (movies + menus up to 120 min.) - BEST
• Best Performances (movies + menus less than 60 min.) - High quality on final DVD
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6) (movies + menus up to 120 min.) - slightly lower quality than above
DL DVDs can store about double of these times.
ALTERNATIVE - The Error Code can indicate that free space on Start-up (BOOT) hard disk is
less than 25Gb (my minimum)
calbe - wrote
If you are getting OSStatus error -2125, I've seen this caused by the computer display sleep settings.
Try changing the sleep settings to never and see if you are able to export.
Yours Bengt W

Why when I make a dvd from an album are my photos not in order?

Why when I make a dvd from an album are my photos not in order?

hansm99079164 a écrit:
Why when I make a dvd from an album are my photos not in order?
Simply because your Explorer/Finder only takes into account the file names and dates of your files.
For instance, in Windows, you have to tell the explorer to sort by 'date taken' otherwise the default sort orders are file dates or file names.
If you have given a 'custom' sort order to your albums, the only way for the Explorer to sort in the same way is to set the custom sort order in the album, export to a new folder with the 'rename' option - same starting text string plus order.

What is the best way to make a DVD from iMovie

What is the best way to make a DVD from iMovie?
I am using iMovie 06 (Naturally) with iDVD 08. I have always used;
iMovie 06, File > Share to iDVD 08. And got pretty good results.
Some say the best way is to quit iMovie 06, open iDVD and import the movie from the Media button.
I have tried both methods in the results look the same. I'm interested in getting the very best quality possible.

You likely have one of the most expensive media converter boxes on the market today.
But does it work well with most macs? (my guess is that it does). But more specifically can it "handshake" with an intel based mac? I personally haven't tried it.
But you may want to read this for yourself if you haven't already:
http://discussions.apple.com/thread.jspa?threadID=1179361&tstart=2362
Assuming it works then the best format is .dv which this unit will support apparently.

I have the new retina MacBook Pro. I made an iMovie but there's no idvd. How do I make a dvd from my iMovie?

I have the new retina MacBook Pro. I made an iMovie but there's no idvd. How do I make a dvd from my iMovie?

Apple no longer sells iDvd. You will have to purchase an older version of iLife that has iDvd on it or use a third party application such as Toast from Roxio.
Ciao.

How to make a dvd from an iPhoto 9 slideshow?

How do I make a dvd from an iphoto 9 shideshow with a macbook pro

You cannot export it as a movie, the only way is to export it as a slide show. Select the quality (bare in mind the higher the quality, the more space it will take up) and click export. It is compatible with ipod touch, iphone 4+, ipad apple tv, mac and PC. Select automatically send slidshow to Itunes, and you can sync it with any device.
Hope this helps

I am unable to make video call from facebook.

i am unable to make video call from facebook or skype

Turns out this may have been caused by having multiple IP addresses on one NIC
Find some error message by the
Lync Server 2010 Logging Tool.
Also Check your configuration is set according to Microsoft best practices with
Best Practices Analyzer.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

How to make one dvd from several camcoder dvd's

How to make one dvd from several camcoder dvd's. I got a dvd camcoder, to be able to play them into DVD player I had to finalize my disks. Now I got several DVD's whith short files and terrible custom camera menu. I'd like to make it more presentable.
The main problem is I dont want to recode my vob files. So Final Cut and other editing soft is bad idea.
Is there any soft on mac I could reauthor my DVD's?

How to make one dvd from several camcoder dvd's. I got a dvd camcoder, to be able to play them into DVD player I had to finalize my disks. Now I got several DVD's whith short files and terrible custom camera menu. I'd like to make it more presentable.
The main problem is I dont want to recode my vob files. So Final Cut and other editing soft is bad idea.
Is there any soft on mac I could reauthor my DVD's?

I am unable to delete my emails from yahoo after I have read them. I can check an email and press delete but the email remains and I am collecting a lot. what should I do?

I am unable to delete my emails from yahoo after I have read them. What should I be doing to correct this problem?

marjoriefrommm,
First go to mail preferences>accounts>mailbox behavior and under trash click "move deleted messages to the trash mailbox, the delete them from there.
Also got to your Yahoo mail and check your settings there.

To make the change from MobilMe I will have to update from System 10.4.11 to 10.7.2. How many system and firmware updates will I have to do?

To make the change from MobilMe I will have to update fro System 10.4.11 to 10.7.2. How many firmware and system updates will I have to make

First, see if your system can run Lion:
http://www.apple.com/macosx/specs.html
If you have any PPC apps, none of them will work under Lion.
If you meet the requirements for Lion, you can go to Snow Leopard(US $29), then update to 10.6.8, then update to Lion(US $29).
Apple says 2GB's of memory minimum. I wouldn't update to Lion unless you can run at least 4GB's.

For the beginner: Make a DVD from DV

KEYWORDS:
Interlace, chop, streak, line, DVD, motion, action, mouse, teeth, blinds
PURPOSE:
Provide a condensed procedure to help the beginner easily convert his/her mini-DV camcorder video into a highest quality DVD using FCP, Compressor and DVDStudioPro.
BACKGROUND:
I was frustrated beyond words with the quality of video coming out of a standard, no-bells/whistles vanilla DVD produced by FCP/Compressor/DVDStudioPro. I knew it was a user error and not a problem with the software. After days of research and headache and thousands of discussions on the subject I was finally successful in producing a DVD that I was proud of.
PROCEDURE:
1) Capture your video using FCP. I use Capture Now feature. My capture settings were 'FireWire NTSC' and 'DV NTSC 48kHz'
2) Edit your sequence to your likings. Don't forget to add chapter markers!
3) Verify Field Dominance is 'Lower (Even)' - most DV camcorders use this setting. HD uses Upper. Check your device manual to be sure. This can be done by selecting the sequence and right-click -> settings. My settings were framesize 720x480, Aspect ratio 'NTSC DV (3:2), Pixel AR 'NTSC CCIR 601/DV 720x480', Field Dominance 'Lower (Even)', Compressor 'DV/DVCPRO-NTSC' Quality 100%, left audio as-is.
4) Using the 'group selection tool', select all elements in your timeline from start to end.
5) In top menu choose 'effects' -> 'video filters' -> 'video' -> 'de-interlace'
6) Export using 'QuickTime Movie', 'current settings' 'audio and video' 'chapter markers' 'deselect Recompress' 'select Make Movie self contained'
7) Open this output with compressor.
8) In settings window, drill down to 'apple' -> 'DVD' -> 'DVD: Best Quality 90 min'. Notice the Field Dominance is in AUTO. This is never good from what I've read and experienced. So, click on the 'duplicate selected setting' and this creates a 'custom' preset.
9) Modify your custom preset video format for Aspect ration 4:3 and field dominance of 'Progressive'.
10) Save preset
11) Drag your new custom video preset to your asset
12) Drag the existing Dolby Digital Prof 2.0 audio preset to your asset
13) Submit. You can view progress by clicking 'Batch Monitor' then selecting the computer doing the work. This should create m2v and ac3 files
14) Using DVDStudioPro, import your m2v and ac3 files
15) Build your DVD menus
16) Viola! Non streaky, non choppy, perfect DVD that would make your Mom proud!
THEORY/LESSONS LEARNED:
1) Several discussions imply you could run into problems choosing 'export using compressor' within FCP. That is why it is recommended you 'export with Quicktime' first.

Fiaafnr
Gary is not wrong, de-interlacing should not be a requisite for creating a good looking DVD from your NTSC DV edits. That you are seeing choppy results due to field order issues suggests that something is awry in your workflow, that de-interlacing fixes it seems to confirm this. If you outline the specific steps you were taking before, that produced the choppy result, with the same clarity with which you describe your current workflow, then someone might be able to spot the problem.
All that said and done, I'm a strictly PAL HD broadcast kind of guy, I don't do NTSC or DVD so I can't really claim any first hand authority on the matter.
What happens if you simply export your movie from the FCP timeline using Export > Quicktime Movie and then drop that directly into DVDSP and/or iDVD and/or Toast?
Andy

Why do I lose sound when I try to make a dvd from imovie to idvd. The sound is all there in iMovie, but when I make my dvd, I have sound for about 3-4 minutes and then its gone.

I have made a 1 hour 30 minute dvd in IMOVIE. The video and the sound are perfect. However, when I make it into a dvd on IDVD, I lose sound after 3 or 4 minutes. Any Suggestions?

Hey MichiganMan32,
I found an article that looks like it applies to that audio issue you're experiencing. Check out the following troubleshooting steps here:
Resolution
Make sure the audio track has not been muted in the timeline.
Switch to timeline view by clicking the clock button in the iMovie window.
There are three checkboxes on the right side of the iMovie window underneath the sound icon. These checkboxes correspond to the video track and two additional audio tracks. Make sure all three tracks are selected. Any deselected tracks are muted.
If you are using iMovie 3 or later, check the "Edit Volume" option to see if it is selected. If so, make sure the volume of the affected video clips is not set to its lowest level, or try deselecting the option to Edit Volume.
See if the volume in iMovie is set to its lowest setting. Directly under the Preview pane in iMovie is a volume slider. Set this slider to maximum volume.
Make sure the computer's audio is not muted.
Quit and reopen iMovie, then check the clip to see if it now plays with audio.
Check to see if any of the video clips you have imported are in the MPEG-1 format. MPEG-1 clips will lose audiowhen you export them as part of your iMovie project.
Quit and reopen iMovie, then reimport the footage from the camera. Play the newly imported footage and see if you now have audio.
If you are using an analog to DV converter instead of a camera, make sure the audio connections are good between your VCR or other analog device and the converter. Check the documentation that came with your converter for more information.
Check /Library/QuickTime/ and ~/Library/QuickTime/ for any third-party plugins. Remove them if present, log out, and log back in. Check to see if the issue persists. If not, check with the manufacturer of the disabled plugin to see if an update is available. Note: The tilde (~) represents your Home directory.
Note: "Apple Intermediate Codec" and "QuickTimeMPEG2" are Apple components. For more information about a particular plugin, select the item in the Finder and choose File > Get Info. Look at the version string of the Get Info window to see if the plugin developer name is listed.
iMovie is missing audio on import, export, or playback
http://support.apple.com/kb/ts2289
Cheers,
David

How to make a DVD from MPEG-2 clips without re-encoding?

I have many standard DVDs (in MPEG-2 unfortunately) with unedited video footage. I want to extract the best parts of those DVDs and compile them to a new DVD without re-encoding (no fancy scene transitions needed).
I have a program called Cinematize 2, that lets me rip the parts I want as "Main Video Stream" (QT), Elementary streams or MPEG2- Program streams. I can save audio and video as one or two separate files. Which ones works best with DVDSP? I would prefer to save as MPEG-2 Program Stream (one file), as these files can also be played back on the computer with the VLC player.
If I have many different MPEG-2 clips, if I make a DVD with DVDSP, can those clips be played back to back like a movie?
I would appreciate any advice on how to to this the best way I want to have as many options open to me as possible in the future. In particular, in which state or format I should save the files from the DVDs, so that I am both able to watch them individually with VLC as well as edit them together in FCP or DVDSP.
Thanks,
Don

Don
You do need to use separate video and audio files, and Streamclip can do it right (I never used Cinematize!).
And can it work with AC3 as well as WAV and AIFF
You can use AIFF (uncompressed) audio and/or Dolby AC3. If you can try using AC3 audio in your DVD-R projects because first, it takes less space that AIFF (using AC3 you can fit 120 min of high quality video in a 4.7 disc) and second, because it has a lower bitrate. Using AIFF is a very common cause of formatting errors and playback problems, because highbitrate errors.
I have yet not used DVDSP, so I'm not familiar with the process.
You can visit [Drew13's site|http://www.dvdstepbystep.com> for some good tutorials.
Hope that helps !
Alberto

Unable to make a DVD from a book I have made in I-photo 09

Similar Messages

Maybe you are looking for