UNABLE TO MAKE GR
Hi Gurus,
I created a purchase order for a particular quantity of 15000 No.s and after that when GR is made using MIGO trans code system displays "Document xxxxxxx does not contain any selectable items". Although the PO is made fresh, why GR is not allowed. Is it also necessary to select "stock type" in the PO screen as "Quality inspection" or the selection in MIGO screen is sufficient.
regards,
Shanmugam
Hi,
Goods receipt, PO chosen in MIGO with 101 movement type,immediately the error comes.
in the confirmation tab , conf control is "inbound delivery APO" ,conf req box is not ticked, in the delivery tab the indicator for GR is ticked, there is no PO history tab in header/item .pls tell me how to check the lock if it is there in the PO item.
regards,
Shanmugam
Similar Messages
-
Unable to make microphone to work on NVIDIA MCP55 onboard sound card
Hello.
Some time ago, I bought a nice HP xw9400 Workstation (with Dual Core AMD Opteron 2216) from Germany. Despite it's starting to become old by today's standards for some stuff like gaming, it's still quite okay to use and the SAS HDD makes it boot fastly. And it has one of the best cases, you can plug PCI/PCIe/PCI-X cards very easily and it's very nice to change or add HDDs. Maybe I'll upgrade the CPUs (I can upgrade the bios and it seems it can support better CPUs) if I find them on eBay or other place.
I have less problems with Arch than the rest of distributions, but I still have weird issues. Despite my computer hardware is somewhat old, I still experience weird problems everywhere (it seems I have some kind of weird "luck").
I have problems using my microphone under Arch with "NVIDIA Corporation MCP55 High Definition Audio (rev a2)" onboard sound card , here is the relevant info.
http://www.alsa-project.org/db/?f=5907a … f5d2b9d88c
$ ls -l /dev/snd
total 0
drwxr-xr-x 2 root root 60 Dec 12 00:00 by-id
drwxr-xr-x 2 root root 80 Dec 12 00:00 by-path
crw-rw----+ 1 root audio 116, 7 Dec 11 23:58 controlC0
crw-rw----+ 1 root audio 116, 9 Dec 12 00:00 controlC1
crw-rw----+ 1 root audio 116, 6 Dec 11 23:58 hwC0D0
crw-rw----+ 1 root audio 116, 5 Dec 12 01:34 pcmC0D0c
crw-rw----+ 1 root audio 116, 4 Dec 12 02:33 pcmC0D0p
crw-rw----+ 1 root audio 116, 3 Dec 11 23:58 pcmC0D1p
crw-rw----+ 1 root audio 116, 2 Dec 12 01:28 pcmC0D2c
crw-rw----+ 1 root audio 116, 8 Dec 12 01:43 pcmC1D0c
crw-rw---- 1 root audio 116, 1 Dec 11 23:58 seq
crw-rw----+ 1 root audio 116, 33 Dec 11 23:58 timer
% arecord -l
**** List of CAPTURE Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: ALC262 Analog [ALC262 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 2: ALC262 Alt Analog [ALC262 Alt Analog]
Subdevices: 2/2
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
card 1: Camera [USB Video Camera], device 0: USB Audio [USB Audio]
Subdevices: 1/1
Subdevice #0: subdevice #0
% arecord --list-pcms
null
Discard all samples (playback) or generate zero samples (capture)
default:CARD=NVidia
HDA NVidia, ALC262 Analog
Default Audio Device
sysdefault:CARD=NVidia
HDA NVidia, ALC262 Analog
Default Audio Device
front:CARD=NVidia,DEV=0
HDA NVidia, ALC262 Analog
Front speakers
surround40:CARD=NVidia,DEV=0
HDA NVidia, ALC262 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=NVidia,DEV=0
HDA NVidia, ALC262 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=NVidia,DEV=0
HDA NVidia, ALC262 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=NVidia,DEV=0
HDA NVidia, ALC262 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=NVidia,DEV=0
HDA NVidia, ALC262 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
default:CARD=Camera
USB Video Camera, USB Audio
Default Audio Device
sysdefault:CARD=Camera
USB Video Camera, USB Audio
Default Audio Device
front:CARD=Camera,DEV=0
USB Video Camera, USB Audio
Front speakers
surround40:CARD=Camera,DEV=0
USB Video Camera, USB Audio
4.0 Surround output to Front and Rear speakers
surround41:CARD=Camera,DEV=0
USB Video Camera, USB Audio
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Camera,DEV=0
USB Video Camera, USB Audio
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Camera,DEV=0
USB Video Camera, USB Audio
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Camera,DEV=0
USB Video Camera, USB Audio
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=Camera,DEV=0
USB Video Camera, USB Audio
IEC958 (S/PDIF) Digital Audio Output
(I was unable to make the microphone on the usb webcam to work, but that's another issue I'll ask in a separate forum thread...)
% head -n 1 /proc/asound/card0/codec*
Codec: Realtek ALC262
I found this in Gentoo forums, very similar issue and a fix that don't works (see in a bit further)
http://forums.gentoo.org/viewtopic-t-88 … art-0.html
And this...
http://ubuntuforums.org/showthread.php?t=1672571
http://ubuntuforums.org/showthread.php?t=1475588
https://bugs.launchpad.net/ubuntu/+sour … bug/577178
http://www.linuxforums.org/forum/ubuntu … rking.html (2007 forum post, but very similar)
http://lists.opensuse.org/opensuse-bugs … 02583.html (2009)
https://bugzilla.redhat.com/show_bug.cgi?id=522101 (2009, closed in 2011)
https://bugzilla.novell.com/show_bug.cgi?id=474383
-> http://lists.opensuse.org/opensuse-bugs … 02583.html (it seems the bug tracker works quite bad or there's some issue looking at that issue, so here's the mailing list message about it)
I also tried create /etc/modprobe.d/alsa-base.conf and add the following line to it...
options snd-hda-intel model=6stack
And no luck! I tried it and still appear both "Rear Mic" and "Front Mic". I'll provide a screenshot later.
I'm starting to understand this, maybe it can help me...
http://alsa.opensrc.org/Record_from_mic
I tested both sound hardware by using arecord and audacity, no luck at all
% arecord -Dhw:1 --dump-hw-params
Recording WAVE 'stdin' : Unsigned 8 bit, Rate 8000 Hz, Mono
HW Params of device "hw:1":
ACCESS: MMAP_INTERLEAVED RW_INTERLEAVED
FORMAT: S16_LE
SUBFORMAT: STD
SAMPLE_BITS: 16
FRAME_BITS: 16
CHANNELS: 1
RATE: [8000 48000]
PERIOD_TIME: [1000 32768000]
PERIOD_SIZE: [32 262144]
PERIOD_BYTES: [64 524288]
PERIODS: [2 1024]
BUFFER_TIME: (1333 65536000]
BUFFER_SIZE: [64 524288]
BUFFER_BYTES: [128 1048576]
TICK_TIME: ALL
arecord: set_params:1233: Sample format non available
Available formats:
- S16_LE
% arecord -D hw:1 -f S16_LE myfile.raw
Recording WAVE 'myfile.raw' : Signed 16 bit Little Endian, Rate 8000 Hz, Mono
arecord: pcm_read:2031: read error: Input/output error
% arecord -D hw:1 -f S16_LE -V myfile.raw
Recording WAVE 'stdin' : Signed 16 bit Little Endian, Rate 8000 Hz, Mono
arecord: pcm_read:2031: read error: Input/output error
% arecord -D hw:1 -f S16_LE -V -r48000 myfile.raw
Recording WAVE 'myfile.raw' : Signed 16 bit Little Endian, Rate 8000 Hz, Mono
arecord: pcm_read:2031: read error: Input/output error
% arecord -D hw:1 -f S16_LE -r48000 myfile.raw
Recording WAVE 'myfile.raw' : Signed 16 bit Little Endian, Rate 48000 Hz, Mono
arecord: pcm_read:2031: read error: Input/output error
% arecord -D hw:1 -f S16_LE -r44100 myfile.raw
Recording WAVE 'myfile.raw' : Signed 16 bit Little Endian, Rate 44100 Hz, Mono
arecord: pcm_read:2031: read error: Input/output error
% arecord -D hw:1 -f S16_LE -r16000 myfile.raw
Recording WAVE 'myfile.raw' : Signed 16 bit Little Endian, Rate 16000 Hz, Mono
arecord: pcm_read:2031: read error: Input/output error
(I tried them with my user and root, same results)
I had an Sound Blaster Audigy 4 Pro, but removed it to see if there was some problem. I'm still unable to use my Microphone even on onboard audio hardware. I'll try to use it once I have the microphone working
Regards.
Last edited by timofonic (2013-12-12 04:11:57)Sorry, that was wrong, I meant
arecord -l
Have you tried making a virtual loopback device like above and using
arecord -vv -fdat out.wav
You should see the #### fluctuate as you speak into the mic. If not, then unmute and turn up your mic in alsamixer. That loopback device will allow you to capture your sound card and hear it at the same time. Another way to do it is to use a jumper from line out to line in on your sound device. You won't be able to hear it while you record though.
If your sound device works, then you can capture what's going through it. You'll need to determine which vitual device your mic is.
Example
arecord -l
**** List of CAPTURE Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 2: ALC662 rev1 Alt Analog [ALC662 rev1 Alt Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: Loopback [Loopback], device 0: Loopback PCM [Loopback PCM]
Subdevices: 8/8
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
Subdevice #3: subdevice #3
Subdevice #4: subdevice #4
Subdevice #5: subdevice #5
Subdevice #6: subdevice #6
Subdevice #7: subdevice #7
card 1: Loopback [Loopback], device 1: Loopback PCM [Loopback PCM]
Subdevices: 8/8
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
Subdevice #3: subdevice #3
Subdevice #4: subdevice #4
Subdevice #5: subdevice #5
Subdevice #6: subdevice #6
Subdevice #7: subdevice #7 -
HT1918 I'm unable to make iTune purchases from my phone using my iTune gift card
I'm unable to make iTune purchases from my phone using my iTune gift card, the gift card information is entered on the phone and I can see the credit amount.
I am having the same problem and it is REALLY frustrating.
Exact setup that you have, COMCAST, PayPal, etc....
I have reviewed my account three times with my PayPal info and received confirmation from my PayPal Account but it still won't let me log in. Let me know if you hear anything.
This is a REAL PAIN.
Andy -
Jabber for Windows 9.2.2 - Unable to make calls from PC
I have implement CUCM 9.1(1a) and CUP 9.1(1a)
I can make calls if i used desk phone for calls but iam unable to make calls whet i turn the option use pc to make calls
p.s: i have set up CCMCIP (CUCM ip address) for all users.i cant place calls via CSF (jabber) !!!! the softphone mode is ok
the problem i think is here when i turn to "csf" mode :
but in the the softphone mode :
172.30.1.242 - is my CUCM ip address.
Thanks in advance
Best Regards
Christos -
My iphone 3g is showing no service all of a sudden. i am unable to make calls. my iphone has turned out to a simple ipod. pls help. ...
My iphone 3g is showing no service all of a sudden. i am unable to make calls. my iphone has turned out to a simple ipod. pls help. ...
-
Unable to make purchases with my new Mac in iTunes Store.
I am unable to make purchases with my new Mac in iTunes Store.
I can buy with my iPhone or my company lap-top (Windows) without any problems. Only with my brand new MacBook Pro it is impossible.
When I try to authorize my Mac, sure dialog window appears and I give my ID and password. Then I get error message: "There was an error storing your authorization information on this computer. The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed." The same message I get, when I try to deauthorize.
If I try to buy anything (pushing button "Buy"), then I get following error message:
"iTunes couldn`t download your purchase. You don`t have write access for your iTunes Media folder or a folder within it. Change permissions (in the Finder) and then choose Store--Check for available downloads".
But I have such a permission!!! I can see it!!!
I have even made so, that "everyone" and "staff" also have permission "read and write" in folder iTunes and all subfolders.! :))
When I ask for "available downloads" immediately I get the same answer: " iTunes couldn`t download your purchase. You don`t have write access for your iTunes Media folder or a folder within it. Change permissions (in the Finder) and then choose Store--Check for available downloads"
I have done:
1. I have used the Terminal to correct the permissions (in Finder it looked correct anyway). - NO Result.
2. With Disk Utility I have verified and repaired Disk permissions. (There were approx. 10-12 incorrect values and 3 of them concerned iTunes and other - Jawa ). - NO Result.
3. I have moved all iTunes files in Thrash and installed iTunes again (previously downloaded from App Store ). - No Result.
4. I have verified Disk permissions with Disk Utility again. There was nothing wrong, but in spite of this I have pushed the button "Repair Disc Permissions". - NO Result.
5. New installation of iTunes again. - No Result.
Can it be, that the reason of a problem are not correct transferred data from my old MacBook?with my new Mac
You have a warranty. Take advantage of it! Call tech support or call the iTunes store. -
I am in the process of doing a migration from SBS 2003 std. edition to SBS 2011 std. I am at the point the migrating mailboxes from the Exch 03 server to the Exch 2010 server. I initially received an error when selecting mailboxes that the mailbox
db on the Exch03 server did not exist. I followed the resolution steps from another forum post to add the Exch 2010 server to the "first administrative group" via the security tab and give full permissions. This solved that issue and
I was able to proceed through the wizard to actually create the local move request. However, after processing the request, I get the following error...
Summary: 1 item(s). 0 succeeded, 1 failed.
Elapsed time: 00:00:03
<username>
Failed
Error:
Mailbox database '0180b88c-0cb2-4b2f-981a-6bdaecc10fcb' is offline.
MapiExceptionLogonFailed: Unable to make connection to the server. (hr=0x80040111, ec=1010)
Diagnostic context:
Lid: 13720 dwParam: 0x6D9 Msg: EEInfo: Flags: 0
Lid: 11672 dwParam: 0x6D9 Msg: EEInfo: NumberOfParameters: 4
Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[0]: Unicode string: ncacn_ip_tcp
Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[1]: Unicode string: <Exch03server>.<domainname>.local
Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[2]: Long val: -545057711
Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[3]: Long val: 382312662
Lid: 45169 StoreEc: 0x824
Lid: 44273
Lid: 59431 EMSMDB.EcDoConnectEx called [length=114]
Lid: 34855 EMSMDB.EcDoConnectEx returned [ec=0x3F2][length=56][latency=4]
Lid: 56945
Lid: 59431 EMSMDB.EcDoConnectEx called [length=114]
Lid: 34855 EMSMDB.EcDoConnectEx returned [ec=0x3F2][length=56][latency=4]
Lid: 59505 StoreEc: 0x3F2
Lid: 52465 StoreEc: 0x3F2
Lid: 60065
Lid: 33777 StoreEc: 0x3F2
Lid: 59805
Lid: 52209 StoreEc: 0x3F2
Lid: 19778
Lid: 27970 StoreEc: 0x3F2
Lid: 17730
Lid: 25922 StoreEc: 0x3F2
Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.1.218.11&t=exchgf1&e=ms.exch.err.ExC2B9A8
Exchange Management Shell command attempted:
'<domainname>.local/MyBusiness/Users/SBSUsers/<username>' | New-MoveRequest -TargetDatabase 'Mailbox Database 2011012823'
Elapsed Time: 00:00:03
I have tested running the command from the EMS and get the following...
Mailbox database '0180b88c-0cb2-4b2f-981a-6bdaecc10fcb' is offline.
+ CategoryInfo : NotSpecified: (0:Int32) [New-MoveRequest], RemoteTransientException
+ FullyQualifiedErrorId : AC277C79,Microsoft.Exchange.Management.RecipientTasks.NewMoveRequest
On the Exch03 Server I have verified/tested/done the following:
--Verified the Information Store Service is running
--Tested restarting the service
--Verified the Mailbox store is mounted
--Tested Dismounting and mounting
--Tested the Exch2010 mailbox db store is functioning properly by creating a test account and verifying w/ OWA.
--Verified routing group b/w servers
--verified network connectivity b/w servers
--Verified DNS is functioning properly on both servers
--Installed Exchange Server MAPI Client and CDO 1.2.1 on Exch2010 server.
--Tested rebooting both severs
I am at a loss. Any ideas would be greatly appreciated. I am unable to continue w/ the migration until I get past this step.Hi,
Thank you for sharing the resolution.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Thanks Gen Lin-MSFT -
Nested Tables - Unable to make Table Header row to repeat in subsequent pages
Hi,
I am unable to make the header row to repeat in subsequent pages for nested tables.
Can anyone reply with a sample form to illustrate a similar scenario?
Thanks,
RohitHi All,
I have selected the the check box Insert Header Row in Subsequent Pages then also the header is not getting flowed in subsequent pages only till 2nd page its getting flowed.
I have used table wizard to create table and i have made the table subform as flowed then also table header is not repeating in subsequent pages.
MainForm (Flowed)
TableSubform1(Flowed)
Table1
HeaderRow
Row1
TableSubform2(Flowed)
Table2
HeaderRow
Row1
I selected TableSubform1 and in Pagination tab OverFlow Leader dropdown i selected HeaderRow, the same i did for TableSubform2 also but the table header is not getting repeated in subsequent pages.
Please help me in solving this problem.
Regards,
Bala Baskaran.S -
Why can't I update my pymt info?? Is my only option really to wait around 4-5 days, while I am unable to make necessary purchases???
Without details about the problem, there's not much we can suggest other than to contact iTunes Store Support. The iTunes Store has no phone support, so I don't know what call you think you'd be waiting for. Go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store.
Regards. -
my phone just has searching... up in the top left hand corner and it has been like this for 4 hours now! i am unable to make calls or texts. what should i do? It is an iphone 5 by the way
Take a look at this link, http://support.apple.com/kb/TS4148
-
SELECT-OPTIONS field unable to make any selections
Hi!
The field which has been declared as follows is unable to make any selections.
It seems like a field which is defined "only for output". Under Screens within the
elementlist is this attribute for this field is not activated as "only for output".
What else can the reason be for that ?
SELECT-OPTIONS: intst_pt FOR cjit07-intst_old.
Regards
IlhanHi Ilhan,
Cjit07 is not a dictionary structure or table.
therfore you cannot assign the value cjit07-intst_old.
that statement is logically incorrect.
thats why it is not able to make any selections.
Reward points if helpful.
Regards,
Bhanu -
Hello,
We have 2 Exchange 2013 (build 712) servers in a DAG with distinct subnets. Cisco ASA in between was set to have no filtering between servers in subnet.
We cannot add database copies nor move mailboxes.
Tes-Mapiconnectivty fails with
unspaceId : e8a087f1-6197-48df-b094-d5c93a7b6070
Server : CLI-SRV01
Database : CLI-MDB01
Mailbox : SystemMailbox{376e8d54-7154-484a-a0a3-58f22d73236f}
MailboxGuid :
IsArchive :
Result : *FAILURE*
Latency : 00:00:00
Error : [Microsoft.Exchange.Data.Storage.MailboxOfflineException]: Cannot open mailbox /o=First
Organization/ou=Exchange Administrative Group
(FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=CLI-SRV01/cn=Microsoft System Attendant. Inner error
[Microsoft.Mapi.MapiExceptionMdbOffline]: MapiExceptionMdbOffline: Unable to make connection to the
server. (hr=0x80004005, ec=1142)
In event log:
The Microsoft Exchange Mailbox Replication service was unable to process jobs in a mailbox database.
Database: RDB
Error: MapiExceptionRecoveryMDBMismatch: Unable to open message store. (hr=0x80004005, ec=1165)
Diagnostic context:
Lid: 55847 EMSMDBPOOL.EcPoolSessionDoRpc called [length=132]
Lid: 43559 EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=248][latency=0]
Adding database copy fails with
The seeding operation failed. Error: An error occurred while performing the seed operation. Error: Failed to open a log truncation context to source server 'CLI-SRV02.CLI.ch'. Hresult: 0xc7ff07d7. Error: Failed to open a log truncation context because the
Microsoft Exchange Information Store service is not running. [Database: CLI-PFDB02, Server: CLI-SRV01.CLI.ch]
How can I further verify communication from CLI-SRV02 to CLI-SRV01 ?
Any help welcome
/PatriceHi,
Let's begin with the following similar thread:
http://social.technet.microsoft.com/Forums/en-US/b651d65c-92f3-460c-b555-247acb8e6fd7/recovered-exchange-2013-arbitration-system-mailboxes?forum=exchangesvravailabilityandisasterrecovery
It is the same error in the event log with you when moving mailboxes. And it can be resolved by recreating the mailboxes.
Additionally, to check the network connection between two servers, I recommend you use the network monitor to catch the package.
Thanks,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Angela Shi
TechNet Community Support -
I am unable to make MIGO with the Purchase order
Hi Guys,
I am unable to Make MIGO with purchase order .I am getting the below error message.
The posting only in periods 2009/09 and 2009/08in company code .
I have checked with OB52 and MMRV .Kindly let me know wht need to be done .
Regards
AravindDear,
Use transaction MMPV and enter following,
From Ccode XXXX (your company code)
To Ccode XXXX (your company code)
Period 09
Fiscal Year 2009
select Close period only and execute.
It will be done.
Regards,
Chintan Joshi. -
I got an internet connection on my phone. After getting the internet connection, I was unable to make a call or check the missed calls that I got. Please help me resolve this problem.
-
Unable to make adobe player work
I have downloaded version 11 of player numerous times because I keep getting requests, and nothing will play on my computer. The message says version is running, but I cannot watch any videos, as same request for latest version shows.
It is an adobe flash player running on Vista.
Date: Sat, 6 Apr 2013 21:59:55 -0700
From: [email protected]
To: [email protected]
Subject: Unable to make adobe player work
Re: Unable to make adobe player work
created by Pat Willener in Adobe Reader - View the full discussion
There is no such thing as "adobe player". There is Adobe Flash Player, Adobe Shockwave Player, Adobe Media Player - all different products. We also need to know your operating system and web browser.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5213224#5213224
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5213224#5213224
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5213224#5213224. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Reader by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
I installed the new google maps app and I am unable to make it work because it says, cannot reach server. I have a iphone 4 with 6.0.1 up to date. Please advise where I can locate to check if my location is turned on.
i found a solution for this issue when google maps shows you an empty map error message cannot reach server. Click on the icon next to search and you are supposed to be presented with your profile, if not u will have an empty space. click on that space, then the "gear " Icon and logout.
restart your iphone then strat google maps again and log back in.
apparently this is happening when you change your google acount password or enble or disable 2 step verification.
Maybe you are looking for
-
Lost the ability to download or play songs from iTunes match service ?
Around 24 hours ago lost the ability to download or play songs from iTunes match service. (iPhone and iPad work) But mac and pc doesn't ? Have downloaded iTunes update and have tryed restaring iTunes
-
Create Good Movements outputs T/C MIGO
Hi, expert When I try to display T/Code MIGO with X material number and types of outputs (1. Individual Slip 2. Individual Slip with Inspection Text 3. Collective split) show me the message <b>The system could not create any outputs</b>. On help it
-
HI, we didn't defined any error message in system msges, but when we save the doc , its giving error messge.. i have checked in table T160m and T100, it's not maintained the mesge number.. then how the system will give error?? where is the settings d
-
In app purchase takes too long
When I make an in app purchase the confirmation popup takes a long time to popup.
-
My ipod nano6 connects but isn't recognized in itunes
Apple just replaced my first generation nano with a 6 generation nano. Nice but after setting it up, I got an error message on my mac that it couldn't read the disk drive. After that even after restarting, reconnecting, resetting etc. when I plug