Unable to make icons
after transferring all of my user data from my old g5 using a firewire between the two imacs. I am unable to make icons for some of the items to place them in the dock. Mainly the ones from MS office, excel, word, powerpoint and entourage. I have checked my permissions and I have read and write permissions for all of them.
Thanks for the help.
Dan
This took care of itself
Similar Messages
-
I installed the new google maps app and I am unable to make it work because it says, cannot reach server. I have a iphone 4 with 6.0.1 up to date. Please advise where I can locate to check if my location is turned on.
i found a solution for this issue when google maps shows you an empty map error message cannot reach server. Click on the icon next to search and you are supposed to be presented with your profile, if not u will have an empty space. click on that space, then the "gear " Icon and logout.
restart your iphone then strat google maps again and log back in.
apparently this is happening when you change your google acount password or enble or disable 2 step verification. -
Unable to make microphone to work on NVIDIA MCP55 onboard sound card
Hello.
Some time ago, I bought a nice HP xw9400 Workstation (with Dual Core AMD Opteron 2216) from Germany. Despite it's starting to become old by today's standards for some stuff like gaming, it's still quite okay to use and the SAS HDD makes it boot fastly. And it has one of the best cases, you can plug PCI/PCIe/PCI-X cards very easily and it's very nice to change or add HDDs. Maybe I'll upgrade the CPUs (I can upgrade the bios and it seems it can support better CPUs) if I find them on eBay or other place.
I have less problems with Arch than the rest of distributions, but I still have weird issues. Despite my computer hardware is somewhat old, I still experience weird problems everywhere (it seems I have some kind of weird "luck").
I have problems using my microphone under Arch with "NVIDIA Corporation MCP55 High Definition Audio (rev a2)" onboard sound card , here is the relevant info.
http://www.alsa-project.org/db/?f=5907a … f5d2b9d88c
$ ls -l /dev/snd
total 0
drwxr-xr-x 2 root root 60 Dec 12 00:00 by-id
drwxr-xr-x 2 root root 80 Dec 12 00:00 by-path
crw-rw----+ 1 root audio 116, 7 Dec 11 23:58 controlC0
crw-rw----+ 1 root audio 116, 9 Dec 12 00:00 controlC1
crw-rw----+ 1 root audio 116, 6 Dec 11 23:58 hwC0D0
crw-rw----+ 1 root audio 116, 5 Dec 12 01:34 pcmC0D0c
crw-rw----+ 1 root audio 116, 4 Dec 12 02:33 pcmC0D0p
crw-rw----+ 1 root audio 116, 3 Dec 11 23:58 pcmC0D1p
crw-rw----+ 1 root audio 116, 2 Dec 12 01:28 pcmC0D2c
crw-rw----+ 1 root audio 116, 8 Dec 12 01:43 pcmC1D0c
crw-rw---- 1 root audio 116, 1 Dec 11 23:58 seq
crw-rw----+ 1 root audio 116, 33 Dec 11 23:58 timer
% arecord -l
**** List of CAPTURE Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: ALC262 Analog [ALC262 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 2: ALC262 Alt Analog [ALC262 Alt Analog]
Subdevices: 2/2
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
card 1: Camera [USB Video Camera], device 0: USB Audio [USB Audio]
Subdevices: 1/1
Subdevice #0: subdevice #0
% arecord --list-pcms
null
Discard all samples (playback) or generate zero samples (capture)
default:CARD=NVidia
HDA NVidia, ALC262 Analog
Default Audio Device
sysdefault:CARD=NVidia
HDA NVidia, ALC262 Analog
Default Audio Device
front:CARD=NVidia,DEV=0
HDA NVidia, ALC262 Analog
Front speakers
surround40:CARD=NVidia,DEV=0
HDA NVidia, ALC262 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=NVidia,DEV=0
HDA NVidia, ALC262 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=NVidia,DEV=0
HDA NVidia, ALC262 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=NVidia,DEV=0
HDA NVidia, ALC262 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=NVidia,DEV=0
HDA NVidia, ALC262 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
default:CARD=Camera
USB Video Camera, USB Audio
Default Audio Device
sysdefault:CARD=Camera
USB Video Camera, USB Audio
Default Audio Device
front:CARD=Camera,DEV=0
USB Video Camera, USB Audio
Front speakers
surround40:CARD=Camera,DEV=0
USB Video Camera, USB Audio
4.0 Surround output to Front and Rear speakers
surround41:CARD=Camera,DEV=0
USB Video Camera, USB Audio
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Camera,DEV=0
USB Video Camera, USB Audio
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Camera,DEV=0
USB Video Camera, USB Audio
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Camera,DEV=0
USB Video Camera, USB Audio
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=Camera,DEV=0
USB Video Camera, USB Audio
IEC958 (S/PDIF) Digital Audio Output
(I was unable to make the microphone on the usb webcam to work, but that's another issue I'll ask in a separate forum thread...)
% head -n 1 /proc/asound/card0/codec*
Codec: Realtek ALC262
I found this in Gentoo forums, very similar issue and a fix that don't works (see in a bit further)
http://forums.gentoo.org/viewtopic-t-88 … art-0.html
And this...
http://ubuntuforums.org/showthread.php?t=1672571
http://ubuntuforums.org/showthread.php?t=1475588
https://bugs.launchpad.net/ubuntu/+sour … bug/577178
http://www.linuxforums.org/forum/ubuntu … rking.html (2007 forum post, but very similar)
http://lists.opensuse.org/opensuse-bugs … 02583.html (2009)
https://bugzilla.redhat.com/show_bug.cgi?id=522101 (2009, closed in 2011)
https://bugzilla.novell.com/show_bug.cgi?id=474383
-> http://lists.opensuse.org/opensuse-bugs … 02583.html (it seems the bug tracker works quite bad or there's some issue looking at that issue, so here's the mailing list message about it)
I also tried create /etc/modprobe.d/alsa-base.conf and add the following line to it...
options snd-hda-intel model=6stack
And no luck! I tried it and still appear both "Rear Mic" and "Front Mic". I'll provide a screenshot later.
I'm starting to understand this, maybe it can help me...
http://alsa.opensrc.org/Record_from_mic
I tested both sound hardware by using arecord and audacity, no luck at all
% arecord -Dhw:1 --dump-hw-params
Recording WAVE 'stdin' : Unsigned 8 bit, Rate 8000 Hz, Mono
HW Params of device "hw:1":
ACCESS: MMAP_INTERLEAVED RW_INTERLEAVED
FORMAT: S16_LE
SUBFORMAT: STD
SAMPLE_BITS: 16
FRAME_BITS: 16
CHANNELS: 1
RATE: [8000 48000]
PERIOD_TIME: [1000 32768000]
PERIOD_SIZE: [32 262144]
PERIOD_BYTES: [64 524288]
PERIODS: [2 1024]
BUFFER_TIME: (1333 65536000]
BUFFER_SIZE: [64 524288]
BUFFER_BYTES: [128 1048576]
TICK_TIME: ALL
arecord: set_params:1233: Sample format non available
Available formats:
- S16_LE
% arecord -D hw:1 -f S16_LE myfile.raw
Recording WAVE 'myfile.raw' : Signed 16 bit Little Endian, Rate 8000 Hz, Mono
arecord: pcm_read:2031: read error: Input/output error
% arecord -D hw:1 -f S16_LE -V myfile.raw
Recording WAVE 'stdin' : Signed 16 bit Little Endian, Rate 8000 Hz, Mono
arecord: pcm_read:2031: read error: Input/output error
% arecord -D hw:1 -f S16_LE -V -r48000 myfile.raw
Recording WAVE 'myfile.raw' : Signed 16 bit Little Endian, Rate 8000 Hz, Mono
arecord: pcm_read:2031: read error: Input/output error
% arecord -D hw:1 -f S16_LE -r48000 myfile.raw
Recording WAVE 'myfile.raw' : Signed 16 bit Little Endian, Rate 48000 Hz, Mono
arecord: pcm_read:2031: read error: Input/output error
% arecord -D hw:1 -f S16_LE -r44100 myfile.raw
Recording WAVE 'myfile.raw' : Signed 16 bit Little Endian, Rate 44100 Hz, Mono
arecord: pcm_read:2031: read error: Input/output error
% arecord -D hw:1 -f S16_LE -r16000 myfile.raw
Recording WAVE 'myfile.raw' : Signed 16 bit Little Endian, Rate 16000 Hz, Mono
arecord: pcm_read:2031: read error: Input/output error
(I tried them with my user and root, same results)
I had an Sound Blaster Audigy 4 Pro, but removed it to see if there was some problem. I'm still unable to use my Microphone even on onboard audio hardware. I'll try to use it once I have the microphone working
Regards.
Last edited by timofonic (2013-12-12 04:11:57)Sorry, that was wrong, I meant
arecord -l
Have you tried making a virtual loopback device like above and using
arecord -vv -fdat out.wav
You should see the #### fluctuate as you speak into the mic. If not, then unmute and turn up your mic in alsamixer. That loopback device will allow you to capture your sound card and hear it at the same time. Another way to do it is to use a jumper from line out to line in on your sound device. You won't be able to hear it while you record though.
If your sound device works, then you can capture what's going through it. You'll need to determine which vitual device your mic is.
Example
arecord -l
**** List of CAPTURE Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 2: ALC662 rev1 Alt Analog [ALC662 rev1 Alt Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: Loopback [Loopback], device 0: Loopback PCM [Loopback PCM]
Subdevices: 8/8
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
Subdevice #3: subdevice #3
Subdevice #4: subdevice #4
Subdevice #5: subdevice #5
Subdevice #6: subdevice #6
Subdevice #7: subdevice #7
card 1: Loopback [Loopback], device 1: Loopback PCM [Loopback PCM]
Subdevices: 8/8
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
Subdevice #3: subdevice #3
Subdevice #4: subdevice #4
Subdevice #5: subdevice #5
Subdevice #6: subdevice #6
Subdevice #7: subdevice #7 -
HT1918 I'm unable to make iTune purchases from my phone using my iTune gift card
I'm unable to make iTune purchases from my phone using my iTune gift card, the gift card information is entered on the phone and I can see the credit amount.
I am having the same problem and it is REALLY frustrating.
Exact setup that you have, COMCAST, PayPal, etc....
I have reviewed my account three times with my PayPal info and received confirmation from my PayPal Account but it still won't let me log in. Let me know if you hear anything.
This is a REAL PAIN.
Andy -
Jabber for Windows 9.2.2 - Unable to make calls from PC
I have implement CUCM 9.1(1a) and CUP 9.1(1a)
I can make calls if i used desk phone for calls but iam unable to make calls whet i turn the option use pc to make calls
p.s: i have set up CCMCIP (CUCM ip address) for all users.i cant place calls via CSF (jabber) !!!! the softphone mode is ok
the problem i think is here when i turn to "csf" mode :
but in the the softphone mode :
172.30.1.242 - is my CUCM ip address.
Thanks in advance
Best Regards
Christos -
My iphone 3g is showing no service all of a sudden. i am unable to make calls. my iphone has turned out to a simple ipod. pls help. ...
My iphone 3g is showing no service all of a sudden. i am unable to make calls. my iphone has turned out to a simple ipod. pls help. ...
-
Unable to make purchases with my new Mac in iTunes Store.
I am unable to make purchases with my new Mac in iTunes Store.
I can buy with my iPhone or my company lap-top (Windows) without any problems. Only with my brand new MacBook Pro it is impossible.
When I try to authorize my Mac, sure dialog window appears and I give my ID and password. Then I get error message: "There was an error storing your authorization information on this computer. The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed." The same message I get, when I try to deauthorize.
If I try to buy anything (pushing button "Buy"), then I get following error message:
"iTunes couldn`t download your purchase. You don`t have write access for your iTunes Media folder or a folder within it. Change permissions (in the Finder) and then choose Store--Check for available downloads".
But I have such a permission!!! I can see it!!!
I have even made so, that "everyone" and "staff" also have permission "read and write" in folder iTunes and all subfolders.! :))
When I ask for "available downloads" immediately I get the same answer: " iTunes couldn`t download your purchase. You don`t have write access for your iTunes Media folder or a folder within it. Change permissions (in the Finder) and then choose Store--Check for available downloads"
I have done:
1. I have used the Terminal to correct the permissions (in Finder it looked correct anyway). - NO Result.
2. With Disk Utility I have verified and repaired Disk permissions. (There were approx. 10-12 incorrect values and 3 of them concerned iTunes and other - Jawa ). - NO Result.
3. I have moved all iTunes files in Thrash and installed iTunes again (previously downloaded from App Store ). - No Result.
4. I have verified Disk permissions with Disk Utility again. There was nothing wrong, but in spite of this I have pushed the button "Repair Disc Permissions". - NO Result.
5. New installation of iTunes again. - No Result.
Can it be, that the reason of a problem are not correct transferred data from my old MacBook?with my new Mac
You have a warranty. Take advantage of it! Call tech support or call the iTunes store. -
I am in the process of doing a migration from SBS 2003 std. edition to SBS 2011 std. I am at the point the migrating mailboxes from the Exch 03 server to the Exch 2010 server. I initially received an error when selecting mailboxes that the mailbox
db on the Exch03 server did not exist. I followed the resolution steps from another forum post to add the Exch 2010 server to the "first administrative group" via the security tab and give full permissions. This solved that issue and
I was able to proceed through the wizard to actually create the local move request. However, after processing the request, I get the following error...
Summary: 1 item(s). 0 succeeded, 1 failed.
Elapsed time: 00:00:03
<username>
Failed
Error:
Mailbox database '0180b88c-0cb2-4b2f-981a-6bdaecc10fcb' is offline.
MapiExceptionLogonFailed: Unable to make connection to the server. (hr=0x80040111, ec=1010)
Diagnostic context:
Lid: 13720 dwParam: 0x6D9 Msg: EEInfo: Flags: 0
Lid: 11672 dwParam: 0x6D9 Msg: EEInfo: NumberOfParameters: 4
Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[0]: Unicode string: ncacn_ip_tcp
Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[1]: Unicode string: <Exch03server>.<domainname>.local
Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[2]: Long val: -545057711
Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[3]: Long val: 382312662
Lid: 45169 StoreEc: 0x824
Lid: 44273
Lid: 59431 EMSMDB.EcDoConnectEx called [length=114]
Lid: 34855 EMSMDB.EcDoConnectEx returned [ec=0x3F2][length=56][latency=4]
Lid: 56945
Lid: 59431 EMSMDB.EcDoConnectEx called [length=114]
Lid: 34855 EMSMDB.EcDoConnectEx returned [ec=0x3F2][length=56][latency=4]
Lid: 59505 StoreEc: 0x3F2
Lid: 52465 StoreEc: 0x3F2
Lid: 60065
Lid: 33777 StoreEc: 0x3F2
Lid: 59805
Lid: 52209 StoreEc: 0x3F2
Lid: 19778
Lid: 27970 StoreEc: 0x3F2
Lid: 17730
Lid: 25922 StoreEc: 0x3F2
Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.1.218.11&t=exchgf1&e=ms.exch.err.ExC2B9A8
Exchange Management Shell command attempted:
'<domainname>.local/MyBusiness/Users/SBSUsers/<username>' | New-MoveRequest -TargetDatabase 'Mailbox Database 2011012823'
Elapsed Time: 00:00:03
I have tested running the command from the EMS and get the following...
Mailbox database '0180b88c-0cb2-4b2f-981a-6bdaecc10fcb' is offline.
+ CategoryInfo : NotSpecified: (0:Int32) [New-MoveRequest], RemoteTransientException
+ FullyQualifiedErrorId : AC277C79,Microsoft.Exchange.Management.RecipientTasks.NewMoveRequest
On the Exch03 Server I have verified/tested/done the following:
--Verified the Information Store Service is running
--Tested restarting the service
--Verified the Mailbox store is mounted
--Tested Dismounting and mounting
--Tested the Exch2010 mailbox db store is functioning properly by creating a test account and verifying w/ OWA.
--Verified routing group b/w servers
--verified network connectivity b/w servers
--Verified DNS is functioning properly on both servers
--Installed Exchange Server MAPI Client and CDO 1.2.1 on Exch2010 server.
--Tested rebooting both severs
I am at a loss. Any ideas would be greatly appreciated. I am unable to continue w/ the migration until I get past this step.Hi,
Thank you for sharing the resolution.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Thanks Gen Lin-MSFT -
Nested Tables - Unable to make Table Header row to repeat in subsequent pages
Hi,
I am unable to make the header row to repeat in subsequent pages for nested tables.
Can anyone reply with a sample form to illustrate a similar scenario?
Thanks,
RohitHi All,
I have selected the the check box Insert Header Row in Subsequent Pages then also the header is not getting flowed in subsequent pages only till 2nd page its getting flowed.
I have used table wizard to create table and i have made the table subform as flowed then also table header is not repeating in subsequent pages.
MainForm (Flowed)
TableSubform1(Flowed)
Table1
HeaderRow
Row1
TableSubform2(Flowed)
Table2
HeaderRow
Row1
I selected TableSubform1 and in Pagination tab OverFlow Leader dropdown i selected HeaderRow, the same i did for TableSubform2 also but the table header is not getting repeated in subsequent pages.
Please help me in solving this problem.
Regards,
Bala Baskaran.S -
PDF Maker icons ("Acrobat (8 Pro) ribbon") missing Outlook 2007 Win XP
Hi. I have Acrobat 8 Pro and Outlook 2007 (not Outlook Express) on Win XP patched current, and the PDF Maker icons ("Acrobat ribbon") is missing from my Outlook Mail window.
Acrobat Create PDF is in the Menu in Word 2007 and works fine there.
I have followed all the instructions in
http://kb2.adobe.com/cps/403/kb403561.html
and all in
http://kb2.adobe.com/cps/401/kb401734.html
except Acrobat Repair or re-installing Acrobat (or Registry edit which is clearly not called for as the dll is already Active), and still no joy. I have verified that PDFMOutlook.dll is in the Active list in Trust Center (and of course therefore it is not disabled) in my Outlook. Still, it fails to appear in my drop-list of Toolbars, therefore I cannot fix the problem myself because the standard answer (choose that Toolbar) is not available on my workstation.
====> Do you recommend un-installing and re-installing? If yes, are you saying there is no risk I will make matters worse? Is there instead some way for me to determine what is actually wrong?
Thanks for any help.
JimTried from another computer with XP and 8 Pro still didn't work so tried from a Win7 machine with adobe X standard and it worked everytime. Just ordered the upgrade because their time is more valuable than the cost.
Thanks -
PDF Maker Icon on Office 2013 Ribbon
XI Pro installed. Windows 7 64 bit. Trying to get PDF Maker Icon on Office 2013 ribbon. In Add-ins, PDFMaker is an active ofifce Com add-in.
Hi Ric1944,
Please update Acrobat to v11.0.7 and check.
The pdfmaker plugin does not get enabled with the base version 11.0
Regards,
Rave -
Why can't I update my pymt info?? Is my only option really to wait around 4-5 days, while I am unable to make necessary purchases???
Without details about the problem, there's not much we can suggest other than to contact iTunes Store Support. The iTunes Store has no phone support, so I don't know what call you think you'd be waiting for. Go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store.
Regards. -
my phone just has searching... up in the top left hand corner and it has been like this for 4 hours now! i am unable to make calls or texts. what should i do? It is an iphone 5 by the way
Take a look at this link, http://support.apple.com/kb/TS4148
-
SELECT-OPTIONS field unable to make any selections
Hi!
The field which has been declared as follows is unable to make any selections.
It seems like a field which is defined "only for output". Under Screens within the
elementlist is this attribute for this field is not activated as "only for output".
What else can the reason be for that ?
SELECT-OPTIONS: intst_pt FOR cjit07-intst_old.
Regards
IlhanHi Ilhan,
Cjit07 is not a dictionary structure or table.
therfore you cannot assign the value cjit07-intst_old.
that statement is logically incorrect.
thats why it is not able to make any selections.
Reward points if helpful.
Regards,
Bhanu -
How to make icons of photos bigger when selecting to attach to email?
how to make icons of photos bigger when selecting to attach to email?
Changing the DPI to 120 won't affect the font size of the menu bar in the Editor. See this FAQ for what happens when you change the DPI:
http://www.johnrellis.com/psedbtool/photoshopelements-6-7-faq.htm#The_Organizers_Menu_Bar_ doesnt_show
Maybe you are looking for
-
Automation in saving a image file with a specific max file size
Hi everyone, I hope someone can help me by this. Background info: We got several image files every 2 weeks which should be edited and mainly reduced in size for web purpose. This work needs 1 work day for one man/woman to do, because he/she has to op
-
Tool selection drop down menu not showing
On the side when I click on the little drop down menu for, say rectangle tool, nothing shows. Only the top bar changes and not all the tools are there. Please help! Thanks
-
How to define OMJJ for movment type
Hello, In OMJJ - against we set the account grouping with following Movement Type - Special Stock Indicator - Movement - Consumption Posting - Transaction key. What is the relationship between special stock indicator, consumption posting and account
-
Can I create a 'wild card' account in Apple Mail?
Not sure if this is the best place to lodge this question, there was no specific section for Mail. Let me know if there is a better spot. I have the advantage of having my own server for mail at Media Temple. So I can create a number of account stemm
-
Hi, I love the new Notes app in Mountain L OSX but can't seem to find how to display the original creation date?? Everytime I change a historical note, it updates the date which is completely useless as I want to look for notes on the historical when