Unable to make OD Master
Hi,
I am unable to promote my server to an OD Master. I tells me an error occured (but not what the error was) and to check my network settings.
I have checked the DNS with changeip -checkhostname and that returns ok. I have also checked any reverse lookups and also reset network and hostname through server app.
Has anyone else had issues with this?
Thanks in advance
Gary
I resolved this -
If /var/root/Library/Application Support/Certificate Authority/IntermediateCA_FQDN_1 exists, then you'll see the "Error creating intermediate CA." in the slap log
Of course, replace FQDN with your server's full host name.
Similar Messages
-
Unable to make postal code as Optional in Customer Master
Hi,
I am unable to make postal code as Optional in Customer Master.
I have defined it in customizing that the postal code is Optional (Financial Accounting (New) > Accounts Receivable and Accounts Payable > Customer Accounts > Master Data > Preparations for Creating Customer Master Data > Define Account Groups with Screen Layout Customers)
see screenshot attached.
But then when I go to créate a customer for that account group the system asks for the postal code as mandatory.
Any help??
Thanks!!!Hi,
Go to T-code: OY17
Select your country then check if “Postal code required entry” maintained with check mark in further checks section
Thanks,
Krishna. -
Unable to make master project containing sub-projects using Project Online PWA (Cloud)
Can anybody help? I tried a lot of navigations in Project Online PWA (not project server) but still unable to make master project containing sub-projects using Project Online PWA (Cloud)
Hi John,
It isn't possible to do this in the Project Web App either in Project Online or Project Server - you will need to use Project Professional 2013 and connect to your Project Online instance, or the subscription version, Project Pro for Office 365.
Best regards,
Brian Smith
Blog |
Facebook | Twitter | Posting is provided "AS IS" with no warranties, and confers no rights.
Project Server TechCenter |
Project Developer Center |
Project Server Help | Project Product Page -
Dial tone but unable to make calls.
Hi,
I had BT Infinity installed on the 10th Feb 14. About a day or two after it all switched off for about 30 mins. When the phones and internet came back online the phones would not ring out.
Whether the phones are plugged into the master socket or either extension they are unable to make external calls yet there is a dial tone.
If I plug the phone in to the test socket then it works fine. This has only ever been an issue since the new faceplate and installation of BT infinity.
When I went to plug the phone into the test socket I noticed an orange and white wire that has seemingly come out of its connection but as to where I don't know. The other 3 cables are still in.
Also internet is working fine.
Any ideas?
Thanks
DaveSegaMegaDave wrote:
None of the extensions work, I get the same thing. A dial tone but unable to ring out.
So before I order one is this looking to be a faceplate fault? Thanks for all your help.
Dave
If you get dial tone with the faceplate disconnected, then the fault is within your own wiring, and it means that the extensions are wired up wrong. You either pay BT to sort it out, or get an independent telephone technician.
This diagram showns the correct way it should be wired.
http://forumhelp.dyndns.info/infinity/infinity_wiring2.jpg
Its most likely that whoever did the Infinity installation, forgot to check for any "star" wiring. ie. extensions connected before the master socket. Its quite often the contractors that forget to do this. The Openreach people usually know what they are doing.
There is nothing else I can suggest, as it appears that the faceplate is not at fault, as the phone and broadband both work fine from the master socket faceplate.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones. -
Unable to make microphone to work on NVIDIA MCP55 onboard sound card
Hello.
Some time ago, I bought a nice HP xw9400 Workstation (with Dual Core AMD Opteron 2216) from Germany. Despite it's starting to become old by today's standards for some stuff like gaming, it's still quite okay to use and the SAS HDD makes it boot fastly. And it has one of the best cases, you can plug PCI/PCIe/PCI-X cards very easily and it's very nice to change or add HDDs. Maybe I'll upgrade the CPUs (I can upgrade the bios and it seems it can support better CPUs) if I find them on eBay or other place.
I have less problems with Arch than the rest of distributions, but I still have weird issues. Despite my computer hardware is somewhat old, I still experience weird problems everywhere (it seems I have some kind of weird "luck").
I have problems using my microphone under Arch with "NVIDIA Corporation MCP55 High Definition Audio (rev a2)" onboard sound card , here is the relevant info.
http://www.alsa-project.org/db/?f=5907a … f5d2b9d88c
$ ls -l /dev/snd
total 0
drwxr-xr-x 2 root root 60 Dec 12 00:00 by-id
drwxr-xr-x 2 root root 80 Dec 12 00:00 by-path
crw-rw----+ 1 root audio 116, 7 Dec 11 23:58 controlC0
crw-rw----+ 1 root audio 116, 9 Dec 12 00:00 controlC1
crw-rw----+ 1 root audio 116, 6 Dec 11 23:58 hwC0D0
crw-rw----+ 1 root audio 116, 5 Dec 12 01:34 pcmC0D0c
crw-rw----+ 1 root audio 116, 4 Dec 12 02:33 pcmC0D0p
crw-rw----+ 1 root audio 116, 3 Dec 11 23:58 pcmC0D1p
crw-rw----+ 1 root audio 116, 2 Dec 12 01:28 pcmC0D2c
crw-rw----+ 1 root audio 116, 8 Dec 12 01:43 pcmC1D0c
crw-rw---- 1 root audio 116, 1 Dec 11 23:58 seq
crw-rw----+ 1 root audio 116, 33 Dec 11 23:58 timer
% arecord -l
**** List of CAPTURE Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: ALC262 Analog [ALC262 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 2: ALC262 Alt Analog [ALC262 Alt Analog]
Subdevices: 2/2
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
card 1: Camera [USB Video Camera], device 0: USB Audio [USB Audio]
Subdevices: 1/1
Subdevice #0: subdevice #0
% arecord --list-pcms
null
Discard all samples (playback) or generate zero samples (capture)
default:CARD=NVidia
HDA NVidia, ALC262 Analog
Default Audio Device
sysdefault:CARD=NVidia
HDA NVidia, ALC262 Analog
Default Audio Device
front:CARD=NVidia,DEV=0
HDA NVidia, ALC262 Analog
Front speakers
surround40:CARD=NVidia,DEV=0
HDA NVidia, ALC262 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=NVidia,DEV=0
HDA NVidia, ALC262 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=NVidia,DEV=0
HDA NVidia, ALC262 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=NVidia,DEV=0
HDA NVidia, ALC262 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=NVidia,DEV=0
HDA NVidia, ALC262 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
default:CARD=Camera
USB Video Camera, USB Audio
Default Audio Device
sysdefault:CARD=Camera
USB Video Camera, USB Audio
Default Audio Device
front:CARD=Camera,DEV=0
USB Video Camera, USB Audio
Front speakers
surround40:CARD=Camera,DEV=0
USB Video Camera, USB Audio
4.0 Surround output to Front and Rear speakers
surround41:CARD=Camera,DEV=0
USB Video Camera, USB Audio
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Camera,DEV=0
USB Video Camera, USB Audio
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Camera,DEV=0
USB Video Camera, USB Audio
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Camera,DEV=0
USB Video Camera, USB Audio
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=Camera,DEV=0
USB Video Camera, USB Audio
IEC958 (S/PDIF) Digital Audio Output
(I was unable to make the microphone on the usb webcam to work, but that's another issue I'll ask in a separate forum thread...)
% head -n 1 /proc/asound/card0/codec*
Codec: Realtek ALC262
I found this in Gentoo forums, very similar issue and a fix that don't works (see in a bit further)
http://forums.gentoo.org/viewtopic-t-88 … art-0.html
And this...
http://ubuntuforums.org/showthread.php?t=1672571
http://ubuntuforums.org/showthread.php?t=1475588
https://bugs.launchpad.net/ubuntu/+sour … bug/577178
http://www.linuxforums.org/forum/ubuntu … rking.html (2007 forum post, but very similar)
http://lists.opensuse.org/opensuse-bugs … 02583.html (2009)
https://bugzilla.redhat.com/show_bug.cgi?id=522101 (2009, closed in 2011)
https://bugzilla.novell.com/show_bug.cgi?id=474383
-> http://lists.opensuse.org/opensuse-bugs … 02583.html (it seems the bug tracker works quite bad or there's some issue looking at that issue, so here's the mailing list message about it)
I also tried create /etc/modprobe.d/alsa-base.conf and add the following line to it...
options snd-hda-intel model=6stack
And no luck! I tried it and still appear both "Rear Mic" and "Front Mic". I'll provide a screenshot later.
I'm starting to understand this, maybe it can help me...
http://alsa.opensrc.org/Record_from_mic
I tested both sound hardware by using arecord and audacity, no luck at all
% arecord -Dhw:1 --dump-hw-params
Recording WAVE 'stdin' : Unsigned 8 bit, Rate 8000 Hz, Mono
HW Params of device "hw:1":
ACCESS: MMAP_INTERLEAVED RW_INTERLEAVED
FORMAT: S16_LE
SUBFORMAT: STD
SAMPLE_BITS: 16
FRAME_BITS: 16
CHANNELS: 1
RATE: [8000 48000]
PERIOD_TIME: [1000 32768000]
PERIOD_SIZE: [32 262144]
PERIOD_BYTES: [64 524288]
PERIODS: [2 1024]
BUFFER_TIME: (1333 65536000]
BUFFER_SIZE: [64 524288]
BUFFER_BYTES: [128 1048576]
TICK_TIME: ALL
arecord: set_params:1233: Sample format non available
Available formats:
- S16_LE
% arecord -D hw:1 -f S16_LE myfile.raw
Recording WAVE 'myfile.raw' : Signed 16 bit Little Endian, Rate 8000 Hz, Mono
arecord: pcm_read:2031: read error: Input/output error
% arecord -D hw:1 -f S16_LE -V myfile.raw
Recording WAVE 'stdin' : Signed 16 bit Little Endian, Rate 8000 Hz, Mono
arecord: pcm_read:2031: read error: Input/output error
% arecord -D hw:1 -f S16_LE -V -r48000 myfile.raw
Recording WAVE 'myfile.raw' : Signed 16 bit Little Endian, Rate 8000 Hz, Mono
arecord: pcm_read:2031: read error: Input/output error
% arecord -D hw:1 -f S16_LE -r48000 myfile.raw
Recording WAVE 'myfile.raw' : Signed 16 bit Little Endian, Rate 48000 Hz, Mono
arecord: pcm_read:2031: read error: Input/output error
% arecord -D hw:1 -f S16_LE -r44100 myfile.raw
Recording WAVE 'myfile.raw' : Signed 16 bit Little Endian, Rate 44100 Hz, Mono
arecord: pcm_read:2031: read error: Input/output error
% arecord -D hw:1 -f S16_LE -r16000 myfile.raw
Recording WAVE 'myfile.raw' : Signed 16 bit Little Endian, Rate 16000 Hz, Mono
arecord: pcm_read:2031: read error: Input/output error
(I tried them with my user and root, same results)
I had an Sound Blaster Audigy 4 Pro, but removed it to see if there was some problem. I'm still unable to use my Microphone even on onboard audio hardware. I'll try to use it once I have the microphone working
Regards.
Last edited by timofonic (2013-12-12 04:11:57)Sorry, that was wrong, I meant
arecord -l
Have you tried making a virtual loopback device like above and using
arecord -vv -fdat out.wav
You should see the #### fluctuate as you speak into the mic. If not, then unmute and turn up your mic in alsamixer. That loopback device will allow you to capture your sound card and hear it at the same time. Another way to do it is to use a jumper from line out to line in on your sound device. You won't be able to hear it while you record though.
If your sound device works, then you can capture what's going through it. You'll need to determine which vitual device your mic is.
Example
arecord -l
**** List of CAPTURE Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 2: ALC662 rev1 Alt Analog [ALC662 rev1 Alt Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: Loopback [Loopback], device 0: Loopback PCM [Loopback PCM]
Subdevices: 8/8
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
Subdevice #3: subdevice #3
Subdevice #4: subdevice #4
Subdevice #5: subdevice #5
Subdevice #6: subdevice #6
Subdevice #7: subdevice #7
card 1: Loopback [Loopback], device 1: Loopback PCM [Loopback PCM]
Subdevices: 8/8
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
Subdevice #3: subdevice #3
Subdevice #4: subdevice #4
Subdevice #5: subdevice #5
Subdevice #6: subdevice #6
Subdevice #7: subdevice #7 -
HT1918 I'm unable to make iTune purchases from my phone using my iTune gift card
I'm unable to make iTune purchases from my phone using my iTune gift card, the gift card information is entered on the phone and I can see the credit amount.
I am having the same problem and it is REALLY frustrating.
Exact setup that you have, COMCAST, PayPal, etc....
I have reviewed my account three times with my PayPal info and received confirmation from my PayPal Account but it still won't let me log in. Let me know if you hear anything.
This is a REAL PAIN.
Andy -
Jabber for Windows 9.2.2 - Unable to make calls from PC
I have implement CUCM 9.1(1a) and CUP 9.1(1a)
I can make calls if i used desk phone for calls but iam unable to make calls whet i turn the option use pc to make calls
p.s: i have set up CCMCIP (CUCM ip address) for all users.i cant place calls via CSF (jabber) !!!! the softphone mode is ok
the problem i think is here when i turn to "csf" mode :
but in the the softphone mode :
172.30.1.242 - is my CUCM ip address.
Thanks in advance
Best Regards
Christos -
My iphone 3g is showing no service all of a sudden. i am unable to make calls. my iphone has turned out to a simple ipod. pls help. ...
My iphone 3g is showing no service all of a sudden. i am unable to make calls. my iphone has turned out to a simple ipod. pls help. ...
-
Unable to make purchases with my new Mac in iTunes Store.
I am unable to make purchases with my new Mac in iTunes Store.
I can buy with my iPhone or my company lap-top (Windows) without any problems. Only with my brand new MacBook Pro it is impossible.
When I try to authorize my Mac, sure dialog window appears and I give my ID and password. Then I get error message: "There was an error storing your authorization information on this computer. The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed." The same message I get, when I try to deauthorize.
If I try to buy anything (pushing button "Buy"), then I get following error message:
"iTunes couldn`t download your purchase. You don`t have write access for your iTunes Media folder or a folder within it. Change permissions (in the Finder) and then choose Store--Check for available downloads".
But I have such a permission!!! I can see it!!!
I have even made so, that "everyone" and "staff" also have permission "read and write" in folder iTunes and all subfolders.! :))
When I ask for "available downloads" immediately I get the same answer: " iTunes couldn`t download your purchase. You don`t have write access for your iTunes Media folder or a folder within it. Change permissions (in the Finder) and then choose Store--Check for available downloads"
I have done:
1. I have used the Terminal to correct the permissions (in Finder it looked correct anyway). - NO Result.
2. With Disk Utility I have verified and repaired Disk permissions. (There were approx. 10-12 incorrect values and 3 of them concerned iTunes and other - Jawa ). - NO Result.
3. I have moved all iTunes files in Thrash and installed iTunes again (previously downloaded from App Store ). - No Result.
4. I have verified Disk permissions with Disk Utility again. There was nothing wrong, but in spite of this I have pushed the button "Repair Disc Permissions". - NO Result.
5. New installation of iTunes again. - No Result.
Can it be, that the reason of a problem are not correct transferred data from my old MacBook?with my new Mac
You have a warranty. Take advantage of it! Call tech support or call the iTunes store. -
I am in the process of doing a migration from SBS 2003 std. edition to SBS 2011 std. I am at the point the migrating mailboxes from the Exch 03 server to the Exch 2010 server. I initially received an error when selecting mailboxes that the mailbox
db on the Exch03 server did not exist. I followed the resolution steps from another forum post to add the Exch 2010 server to the "first administrative group" via the security tab and give full permissions. This solved that issue and
I was able to proceed through the wizard to actually create the local move request. However, after processing the request, I get the following error...
Summary: 1 item(s). 0 succeeded, 1 failed.
Elapsed time: 00:00:03
<username>
Failed
Error:
Mailbox database '0180b88c-0cb2-4b2f-981a-6bdaecc10fcb' is offline.
MapiExceptionLogonFailed: Unable to make connection to the server. (hr=0x80040111, ec=1010)
Diagnostic context:
Lid: 13720 dwParam: 0x6D9 Msg: EEInfo: Flags: 0
Lid: 11672 dwParam: 0x6D9 Msg: EEInfo: NumberOfParameters: 4
Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[0]: Unicode string: ncacn_ip_tcp
Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[1]: Unicode string: <Exch03server>.<domainname>.local
Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[2]: Long val: -545057711
Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[3]: Long val: 382312662
Lid: 45169 StoreEc: 0x824
Lid: 44273
Lid: 59431 EMSMDB.EcDoConnectEx called [length=114]
Lid: 34855 EMSMDB.EcDoConnectEx returned [ec=0x3F2][length=56][latency=4]
Lid: 56945
Lid: 59431 EMSMDB.EcDoConnectEx called [length=114]
Lid: 34855 EMSMDB.EcDoConnectEx returned [ec=0x3F2][length=56][latency=4]
Lid: 59505 StoreEc: 0x3F2
Lid: 52465 StoreEc: 0x3F2
Lid: 60065
Lid: 33777 StoreEc: 0x3F2
Lid: 59805
Lid: 52209 StoreEc: 0x3F2
Lid: 19778
Lid: 27970 StoreEc: 0x3F2
Lid: 17730
Lid: 25922 StoreEc: 0x3F2
Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.1.218.11&t=exchgf1&e=ms.exch.err.ExC2B9A8
Exchange Management Shell command attempted:
'<domainname>.local/MyBusiness/Users/SBSUsers/<username>' | New-MoveRequest -TargetDatabase 'Mailbox Database 2011012823'
Elapsed Time: 00:00:03
I have tested running the command from the EMS and get the following...
Mailbox database '0180b88c-0cb2-4b2f-981a-6bdaecc10fcb' is offline.
+ CategoryInfo : NotSpecified: (0:Int32) [New-MoveRequest], RemoteTransientException
+ FullyQualifiedErrorId : AC277C79,Microsoft.Exchange.Management.RecipientTasks.NewMoveRequest
On the Exch03 Server I have verified/tested/done the following:
--Verified the Information Store Service is running
--Tested restarting the service
--Verified the Mailbox store is mounted
--Tested Dismounting and mounting
--Tested the Exch2010 mailbox db store is functioning properly by creating a test account and verifying w/ OWA.
--Verified routing group b/w servers
--verified network connectivity b/w servers
--Verified DNS is functioning properly on both servers
--Installed Exchange Server MAPI Client and CDO 1.2.1 on Exch2010 server.
--Tested rebooting both severs
I am at a loss. Any ideas would be greatly appreciated. I am unable to continue w/ the migration until I get past this step.Hi,
Thank you for sharing the resolution.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Thanks Gen Lin-MSFT -
Nested Tables - Unable to make Table Header row to repeat in subsequent pages
Hi,
I am unable to make the header row to repeat in subsequent pages for nested tables.
Can anyone reply with a sample form to illustrate a similar scenario?
Thanks,
RohitHi All,
I have selected the the check box Insert Header Row in Subsequent Pages then also the header is not getting flowed in subsequent pages only till 2nd page its getting flowed.
I have used table wizard to create table and i have made the table subform as flowed then also table header is not repeating in subsequent pages.
MainForm (Flowed)
TableSubform1(Flowed)
Table1
HeaderRow
Row1
TableSubform2(Flowed)
Table2
HeaderRow
Row1
I selected TableSubform1 and in Pagination tab OverFlow Leader dropdown i selected HeaderRow, the same i did for TableSubform2 also but the table header is not getting repeated in subsequent pages.
Please help me in solving this problem.
Regards,
Bala Baskaran.S -
Unable to create Customer master in ECC 6
Hii Gurus
I am unable to create customer master in ECC 6 version as system says that sales area defined even though it is defined. if i am going to XD01 when i click on All sales area Button it is showing only sales organisaiton and rest distribution channel and division is not appearing. is there any activation required for distribution channels or at divisions so that i can appear in avalible sales area.
i have tried to enter it manually but it is not accepting. when i check at enterprise structure it is defined and assinged
can any body help me oout?
thanks in advance
surHello,
This is an issue by non-assigning on common distribution channel and common division.
Go to SPRO --> Sales & Distribution --> Masterdata --> Define Common Distribution channel (Txn : VOR1).
Give you distribution channel to the fields Reference distribution channle for conditions and Reference DC for customer and material masters
Go to SPRO --> Sales & Distribution --> Masterdata --> Define Common Division (Txn : VOR2)
Maintian Common division 00 agaist your sales org as well as the fields Reference Division for conditions and Reference Division for customer and material masters
Prase -
Why can't I update my pymt info?? Is my only option really to wait around 4-5 days, while I am unable to make necessary purchases???
Without details about the problem, there's not much we can suggest other than to contact iTunes Store Support. The iTunes Store has no phone support, so I don't know what call you think you'd be waiting for. Go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store.
Regards. -
my phone just has searching... up in the top left hand corner and it has been like this for 4 hours now! i am unable to make calls or texts. what should i do? It is an iphone 5 by the way
Take a look at this link, http://support.apple.com/kb/TS4148
-
SELECT-OPTIONS field unable to make any selections
Hi!
The field which has been declared as follows is unable to make any selections.
It seems like a field which is defined "only for output". Under Screens within the
elementlist is this attribute for this field is not activated as "only for output".
What else can the reason be for that ?
SELECT-OPTIONS: intst_pt FOR cjit07-intst_old.
Regards
IlhanHi Ilhan,
Cjit07 is not a dictionary structure or table.
therfore you cannot assign the value cjit07-intst_old.
that statement is logically incorrect.
thats why it is not able to make any selections.
Reward points if helpful.
Regards,
Bhanu
Maybe you are looking for
-
Iphone 4 can't hear me, but I hear them
My iphone 4 I can hear them, but they can't hear me. They can hear me on speaker and they can hear me with my Bluetooth. This happened a couple of months ago. I went to the Apple store. They told me that the moisture indicator was orange at the botto
-
Hello everyone, I purchased the new Apple TV 3 today. We hooked it up without a hitch and got into everything fine, then my sister turned it off. Awhile later she went to put it back on and on the screen was a picture of the apple tv, connection pl
-
6680-Voda live streaming-Not enough Bandwidth
Got a Nokia 6680 yesterday and could get the streaming Sky on Voda live no problem. I have tried today, it is saying not enough bandwidth and to check my network settings. Not sure what to do at this point. Any help would be appreciated please.
-
Dynamic Textboxes in JSP using struts
Hi all I'm using JSP and Struts framework. I have two buttons Add row and delete row.(not submit buttons) on click i need to either generate or delete a row of textboxes. I able to do the same using javascript but the tag in that case is <input..>(no
-
Connecting OBIEE 10.3 to Sybase Database
I've been testing connecting OBIEE to a Sybase 12.5.4 database (ESD 7) and I am having issues when I try update row count in the Admin tool or running any Answers through Presentation Services. I can create the Physical and Business Model in the Admi