Unable to make Port Replicator 43R8770 work with T400

I have a relatively new (four months old) T400 ThinkPad running on Windows XP SP3, and I have been unable to get the Port Replicator to work at all with it. I am attempting to simply mirror my notebook display on a larger monitor, and have installed the latest driver for the replicator from the Lenovo website. The system tray icon for the replicator never appears, even after installing and uninstalling the driver, and so I am unable to get the two monitors to mirror each other.
The only indication I have that something is wrong is during the driver install I receive an "Application Error" message for some file labeled ed_16208.exe. I know that the Port Replicator works fine, as I have been using it for the last four months with an older T42 notebook running on XP SP2.
The Lenovo phone rep was completely unable to help me. His only suggestion was that it must be that the replicator doesn't work with SP3, since it worked with SP2 on the older model, and that I shouldn't have had Windows automatic updates turned on. (I'm serious.) I reminded him that Lenovo shipped the new T400 to me with SP3 installed, and his response was that it was therefore a Microsoft problem and that I should try to roll the notebook back to SP2. At that point I told him I might as well just use the replicator as a door stop.
I am completely frustrated.

An update. I was able to get the Lenovo Display Adapter system tray icon to appear. However, I can't adjust the settings on it to get it to mirror, and when I attempt to do so there is an error message on the icon for the Lenovo Display Adapter that states "Change Display Settings Failed: Bad mode while setting \\. \DISPLAYV1 enabled in registry"
Does anyone have any ideas?

Similar Messages

I'm unable to open my Office Word for Mac. The message say's check with developer to make sure Microsoft Word works with this version of Mac OS X.

I'm unable to open my Office Word for Mac. The message say's check with developer to make sure Microsoft Word works with this version of Mac OS X.
Orginally I downloaded OFFICE from the Apple Store App, so unable to reinstall as it suggest.

Which version of Office, 2004, 2008 or 2011
and
MS Office is not available from the App Store, so where did you get it?

What is the best way to make 3g/4g simcard work with airport extreme

I live in Mumbai, India and I am tired of the state of broadband connection over here. I have vodafone 3G Data only SIM with me which I use via a 3G dongle that plugs into my mac. It has a decent speed and I would like to use it as a primary internet connection across the 3 iPhones, 2 iPads, a Mac and 2 apple tvs at my home.
I have a 2014 airport extreme and i want to know what hardware do i need to make the 3g sim work with it? like put the sim in the hardware/adapter and then plug it into the wan port of the airport extreme and let the AE handle my dhcp so that i can access 3g internet from all my devices?
also, i was something 4g compatible as 4g is on the roll in India. it doesn't have to be a wireless router on its own but something that can dial the connection and provide internet access to the AE via the wan port.
thanks.
Neerav

The only reason I mention it would be configure your network for a roaming instead of extended setup. The number one advantage over an extended is bandwidth performance ... aka speed.
For example, I have a Cisco RVS4000 wired router as my main Internet router. I am fortunate that my 2-story home came pre-wired for Ethernet. I have placed an AirPort Extreme and a Time Capsule, connected by Ethernet back to the Cisco; one on each floor to provide a seamless wireless network for an assortment of wired/wireless clients. With this setup, I am able to stream HD TV content throughout the house. Mine is an example of what you can do with a roaming network.

How to make the mobile application work with firewall and anti-virus ON

Hi,
I keep on receiving internal processing error when i try to login sap mobile solution 1.3.0 on my ipad and i was provided a solution, that is to turn off my firewall and antivirus. I works by turn off both of it but i cant possible turn of the firewall and antivirus on the server.
Can anyone guide me how to make the mobile application work with firewall and anti-virus ON
Thank you

Dear Rajesh,
Create a policy in your fire wall to allow the port to send and receive data.
I believe the port for the mobile should be port 8080 and 8443.
And your license server port 30000 and 30001
nd.Q

How do I make my iPod classic work with iTunes 9.1

How do I make my iPod classic work with iTunes 9.1?

You are correct in some of your assertions, Limnos but, if I were to follow Apple's wishes, I would have to purchase the latest and greatest Apple product every month! I refuse to do that. I understand that my G4 is old but, it does what I need it to do. To answer your question though, I purchased the iPod classic as a refurbished unit, about 5 years ago and had it replaced three times, since then so, there is no way for me to know how old it is.
From my knowledge of how the Classics work(which is extensive.) It is basically a hard disk. There should be of performing a low level format, plug it back in and the G4 should recognize the ROm and automatically search for the correct software associated with that version of iPod and load it but, Apple will most likely no longer carry the software on their servers anymore!(surprise,surprise.)

What is the best way to record a project to an external recorded via firewire. Also, who makes a recorder that works with a mac?

What is the best way to record a project from the timeline to an external recorder via firewire? Also, who makes a recorder that works with a mac and recordes in realtime? This is possible right?

While theoretically possible, sometimes the camera people disable recording back to tape from the computer due to DRM (digital rights managment) issues. They will allow tape to tape transfers however.
Test your process first is all I can advise.
x

DEAR APPLE, PLEASE MAKE YOU USB MODEM WORK WITH LION. Thank you so much.

DEAR APPLE, PLEASE MAKE YOUR USB MODEM WORK WITH LION.
Thank you so much,
Yuri

Yuri,
Try Apple Feedback
Check out the Zoom 3095

An Idea: How to make the Magic Timeline work with Tracks

i have thought about this for a title and i think i have found a solution. the magic timeline is pretty cool but with it we lost tracks. for broadcast (not only for that but mostly for it) you need tracks that are assignt in a special way and there is no way around it. so i came up with the following idea…
to make the magic timeline work with tracks it will be a like an audio compound clip, that will give you full access to the magic time. but it can be outputted to proper tracks assignment.
current audio compound clips don't show you the video if there is one. this one will. also audio can be tagged to a track so it will automatically drop into the right track. you can of course move the audio from one track to another. moving the clip to another track will auto change the tag to new track. if you copy an audio clip from one track to another, the original clip will keep its tag but the copied one gets the new tag.
example…
you do a voice over with all your edits and stuff. then you collapse it to a track (new name to get rid of any sort of confusion). you can tag/name the track to "voice over" or whatever you want and color label it.
you need to edit, adjust it? no problem! double click it and it will open up and you'll see the magic timeline. edit till you done and click on arrow to return to track view.
export your movie with proper tracks for broadcast right out of final cut pro x
in the end your output timeline looks like a timeline from fcp7 before you output it on tape.
could this work? i believe it could and it would help to make fcpx ready for broadcast.
i hope this makes some sort of sense to you
anyway, i hope apple will include this or something like this in an update for fcpx.

You may be able to get by with just running MDT 2010 for now. *However* you *must* ensure that you are running WinPE 3.1 or greater, If you are unsure, open up a command prompt in WinPE (PRess F8), and run "ver" it should say build 7601 or greater, 7600
and less is not compatible.
When done, Run the Dell Advanced Format tool in the Full OS on a deployed machine to verify: http://del.ly/afhdd Although it is possible to install an OS on an Advanced Format Drive
with WInPE 3.0 or earlier, and it may *appear* to work, performance may suffer. The Dell AF tool should tell you if the sectors are aligned properly.
Additionally, it is also possible that the storage driver you have installed in your image is incompatible with AF drives. Check the Make/Model and check with the Hardware Mfg to see if they have driver that supports AF drives.
Keith Garner - keithga.wordpress.com

So, I've taken my panasonic printer back to the shop and exchenged it for a Canon MF-4430. Alas... the generic drivers do not make it print. Is it possible to get drivers to make this canon printer work with my lovely Mac Book Pro Snow Leopard, 6.8?

So, I've taken my panasonic printer back to the shop and exchenged it for a Canon MF-4430. Alas... the generic drivers do not make it print. Is it possible to get drivers to make this canon printer work with my lovely Mac Book Pro Snow Leopard, 6.8?

I could not find a MF-4430 at the Canon site. Are you sure the model is correct? They have a MF4450. The Mac drivers are here:
http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/imageclass _series/imageclass_mf4450#DriversAndSoftware
If you are sure you have a MF4430, look around the canon site for the drivers.

How to make the bt hub work with GreenBee?

I have some old BT hub (hub 2,3,4) can I make any of them work with another ISP like greenbee I heard changing the user name and password works? But I don't know what to change them to

There are some options on this web page.
Wireless connection problems
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

How to make Firefox 3.6 work with jinit 1.3.1.26

Hi All,
Can somebody help me out on this,I know JINIT is desupported but is there a way to make firefox 3.6 work with jinit 1.3.1.26.
bcos my customet dont wanna move to Native java as they had some issues with NAtive java.
any help would be appreciated.
Thanks & Regards
S

Hi,
What is the applciation release?
Refer to these documents to verify if you are running on a certified client combination:
Note: 389422.1 - Recommended Browsers for Oracle E-Business Suite Release 12
Note: 285218.1 - Recommended Browsers for Oracle E-Business Suite 11i
Regards,
Hussein

How to make "visa find resource" working with Agilent device

I am trying to use Agilent 82357B GPIB device with LabVIEW for instrument control.
I have checked:
1.       NI-VISA (ver 5.1.1) is the primary visa by checking visa.dll properties under windows\system32 folder
2.       Enable NIVISATulip.dll in NI Max Explorer
3.       Enable the Agilent libraries to work with NI 488.2 in Agilent IO library (ver 16).
I am able to communicate with the instrument in Max Explorer and talk to the instrument in LabVIEW with VISA write for almost all commands.
But I can NOT make one particular visa function (Visa find resource) working with Agilent 82357B GPIB.
With NI USB GPIB device, the same code above can find attached instruments as below, where GPIB1 is the Agilent device and GPIB0 is the NI device.
I have no clue on how to make “visa find resource” working with Agilent device.
Please help.
Solved!
Go to Solution.

Quick question. Did you also enable 488 support in Agilent?
If that does'not work try this. and well see if you found a bug
Jeff

I want to buy an ipod classic. does it have bluetooth, and if not, is there a way to put bluetooth on it, because i have to make my wireless headphones work with them.

i want to buy an ipod classic. does it have bluetooth, and if not, is there a way to put bluetooth on it, because i have to make my wireless headphones work with them.

Yes, you can setup the iPod and redownload past iTunes purchases. You need a wifi connectin to the interent.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Unable to make RMI-based JMX connection with post login stored admin creden

Hello,
I've installed a stand-alone OC4J on a couple of servers with Red Hat Enterprise Linux Server release 5.1 (Tikanga).
At one server I am not bale to start the OC4J properly.This server has two network adresses.
2008-09-08 14:33:12,670 [EMUI_14_32_57_/console/postLogon] WARN app.PostLogonPageHandler testStoredCredentials.490 - unable to make RMI-based JMX connection with post login stored admin credentials
java.net.ConnectException: Connection refused
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
What could be the reason of this error? And how can I solve the problem?
Thanks in advance,
Regards Leon

I don't know for sure, but perhaps the password encryption method uses something from the server to generate a key/seed for the encryption?
Try and manually reset the credentials to see if it helps
1. Edit the j2ee/home/config/system-jazn-data.xml file.
2. Find the oc4jadmin user entry and modify the credentials tag to look like the following
               <user>
                    <name>oc4jadmin</name>
                    <display-name>OC4J Administrator</display-name>
                    <guid>B23216B0102E11DDBF9DE5D93DCAFE54</guid>
                    <description>OC4J Administrator</description>
                    <credentials>!welcome1</credentials>
               </user>3. Restart the container and see if you can then login using oc4jadmin/welcome1.
No guarantees, but its worth a shot.
-steve-

HT204368 any way to make an iphone4 to work with Skype via bluetooth?

any way to make an iphone4 to work with Skype via bluetooth?

I have a Samsung HM1500. i don't know if it has 2dp. I guess it doesn't, 'couse otherwise would have work, wouldn't it?
Any other way to fix this?
Why doesn't Apple make a softwear update to solve this kind of problems?
And do you have any idea how to set up diferent tones and for diferent applications - for istance Skype?
Thank you very much for your help.

Unable to make Port Replicator 43R8770 work with T400

Similar Messages

Maybe you are looking for