Unable to map drive to 4100 from Windows

Hi,
I have a 4100 and I am unable to CIFS map a drive to my NAS from Windows. I can do it fine from a Mac, but my Windows & PC's and 2008 server are unable to map a drive to the Share using the same credentials.
Am I missing something?
Thanks in advance,
Bob

Well I have not found any issues with W7 but.... Server 08 is another story! Since you are joined to the domain, have you verified that the join was "Actually" successful? This is one of those things that just does not make since, but because it is Vista .... err Server 08 Samba ended up being locked out.
What is your FW on the NSS6000?
If possible please post your logs as they can tell us alot, sometimes more than we want. My guess is one of two things, you are trying to access the share from a workgroup computer or we did not actually join the domain. Windows likes to make things easier for the user and will cache credentials, so you may want to log out and back in. Once back, try the map again. If it still fails and you are using domain creds, I bet the NSS did not join. Also, if your domain is something like "mycompany.local" and your domain NetBIOS name is "mycompanyHQ", you will not be able to join to a 2008 server.
Keep me posted.

Similar Messages

Touchsmart Iq506t Windows 7, Unable to acess s-video input from windows media center.

System: Hp Touchsmart IQ506T
Windows 7
Avermedia (A327) Hybrid mini Pcie Tv Tuner (NTSC/ATSC)
I purchase this system used without an operating system. I installed windows 7 and downloaded the drivers from Hp. All drivers are installed properly and the Avermedia (A327) mini card driver can be seen in device manager.
Yet, the A327 tv tuner will not give me access to the s-video input. I can get tv thru the rf connection but I want to use the s-video because it has a cleaner signal.
Any information about the s-video port will be appreciated..
Thank you..

Hi Cnmarsh,
I understand you are having an issue with the Touchsmart Iq506t with Windows 7, unable to access s-video input from Windows Media Center.
I read from your post that drivers are installed properly and the Aver media mini card drivers are seen in device manager.
I was wondering if the any of the drivers in Device Manager have a Yellow caution?
Also, is the Touchsmart Iq506t software all up to date?
You could try to download and run HP PC Hardware Diagnostics tool with this link.
http://www8.hp.com/us/en/campaigns/hpsupportassistant/pc-diags.html?jumpid=va_r602_us/en/any/pps/pl_...
Looking forward to hearing from you.
Thanks
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Unable to install iTunes after converting from Windows Vista to Windows 7. Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193).

Unable to install iTunes after converting from Windows Vista to Windows 7. Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193). I have my iPod plugged into my computer via USB port. What am I doing wrong?

i have the only account on my laptop so have checked and am the account administrator
i run windows 7 home premium
I have the same problem and
have followed the link uninstalling in the correct order,
then restarted as per instructions,
went to Apple to download itunes,
hit download now,
Visit the iTunes download page. Click Download Now to download the iTunes installer. When prompted, click Save (instead of Run).
did not get a save instead of run prompt
Right click on iTunesSetup or iTunes64Setup (the installer you downloaded in step 3).
If you have Windows Vista, Windows 7, and Windows 8: Choose "Run as administrator."
i can only click run as administrator from right clicking the shortcut on my desktop screen
If iTunes fails to install or repair, it might be necessary to remove components left from a previous installation of iTunes and then reinstall.
sick of doing this
at least 7 or 8 times i have re installed itunes to no avail
troubleshooting no better
please help. pulling my hair out at this stage
it was working fine until 2 days ago when i opened itunes it offered to update to 12.1
not working since i clicked yes
also i have gone to restore previous point and ffs there are no restore points before my multiple reinstalls
really dont want to have to restore factory settings

Cannot install DVD/CD ROM drive after upgrading from Windows 7

I had a working DVD/CD-ROM drive before upgrading. Now it shows as Unknown Device in Device Manager, I tried uninstalling it and then scanned for hardware changes but it still does not work. I also tried manually selecting a CD-ROM drive for it but it
ends up with an error code 31. I also checked for {4d36e965-e325-11ce-bfc1-08002be10318} registry but it did not have lowerfilters key. How do I install the driver for it?

Hi,
The error code 31 means that Windows cannot load the drivers required for this device.
Considering that this issue mostly can be caused by compatible issue.
Please check if you can fine the latest driver from Manufacturer’s website. If so, try to install it under Windows 10 compatibility mode: Right click the installer of the driver, choose Properties, choose Windows 7 under Compatibility
mode to install.
If the CD device still fails to work, I recommend to check the setupapi.dev.log under %windir%\inf, locate the device and find the line below:
dvi: Rank - 0x00000000
Then, corresponds the score in this link:
Identifier Score
http://msdn.microsoft.com/en-us/library/windows/hardware/ff546297(v=vs.85).aspx
The value 0x00003000 is the best identifier score and the value 0x00003FFF is the worst identifier score.
The score near 0x00003FFF means that the driver and device may not compatible with current system, we may need to wait for the menufacturer’s driver update.
Thanks for your understanding.
Kate Li
TechNet Community Support

Unable to load driver for Storage for Windows 2008 UCS B230 M2

I am trying to Boot from SAN windows 2008 R2. I have configured and connected the Cisco UCS Chassis and FI to our Network & Storage .I am having problem to install Windows 2008 R2 Server on Blades as it is not able to see Storage LUN while installation .I downloaded drivers from Cisco Support Site.
I tried drivers from ISO ucs-bxxx-drivers.2.1.3 latest version but Windows is showing driver is available but not installing the driver I am getting the following error and not showing the LUN hard disk to select the installation.
Windows is unabe to locate storage LUN. I am able to LUN while booting process.
I am not sure where I am doing wrong.or I am chosing wrong driver.

I don't see the error message either, but to install W2008 on a boot lun, you must
1) do the zoning of the vhba (initiator) to the pwwn of the storage subsystem port (target)
2) the lun masking / mapping has to be setup
3) fnic driver has to be installed
Therefore, if you don't see your boot lun, either 1) and or 2) has to be fixed
then
4) only one path should be configured (e.g. fabric a), because no multipathing is available during installation, this is very important, and necessary for W2003, 2008 and 2012
and
5) if you see the boot lun, and can install, but the boot fails, the problem is the boot policy !
Very easy ! Good luck !

Unable to uninstall sql server 2012 from Windows 7(ultimate) 64-bit SP1 version.

I am trying to install sql sever 2012 on my m/c but it's giving me error after partial installation.
Now I have successfully installed Sql Server 2008 R2 on my machine but when I am trying to uninstall 2012 sql server from my machine its giving an error regarding unsupported OS. However as mentioned earlier I have Windows 2007 Ultimate SP1 (64-bit) installed
on my machine which is included in valid platform for sql server 2012. Also I installed visual studio 2013 on my machine but it existed with error SqlServer\LocalDB not installed.

Hi pritamk,
According to your error message, as other post, you can uninstall SQL Server from command line, inaddition, another workaround is that change the compatibility mode of setup.exe to Vista SP2, then run “Remove” option from the control panel. You can refer
to the following steps.
Browse to your SQL setup bootstrap folder, For SQL Server 2012, this is the path "C:\Program Files \Microsoft SQL Server\110\Setup Bootstrap\SQLServer2012\".
Go to Setup.exe file and right click on Setup.exe. Then go to properties and click on "Compatibility" tab. Under "Compatibility mode", click on Run this program in compatibility mode for "Windows Vista (Service Pack 2)". Then Click on "Apply" then "OK".
After that go to control panel -> Programs and Features -> and remove SQL Server 2012
There is similar issue about uninstalling SQL Server 2012 RC0 from control panel. You can review the following post.
https://connect.microsoft.com/SQLServer/feedback/details/707706/unable-to-uninstall-sql-server-2012-rc0-from-control-panel
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Cannot access shared external drive on iMac from Windows 7

Used to be able to access this drive with no problem from any of my PC's. Sent iMac in for repair and system drive was wiped so I'm starting from clean install of Leopard. Did all the updates first including 10.6.4 which wasn't on before the system drive died.
Firewall is off
SMB is on
Everyone as well as main user has read write access to external drive
iMac is in the same workgroup as machine, although it wasn't before and it worked fine.
PC can ping the IP of the iMac and get a response, can see the iMac in list of networked computers
but cannot access anything on it.
Windows 7 network diagnostics says "file and print sharing resource (JMGIMAC) is online but isn't responding to connection attempts" "The remote computer isn't responding to connections on port 445
I've tried everything, any ideas
Josh

I am familiar with the instructions for sharing files and have followed them (several times I might add).
My problem is that the information that I place in the WINS tab ( in the Network Preference Pane) disappears when the iMac is re-started. This information (especially the Workgroup name) must appear when the computer re-boots. It doesn't and I have to re-enter the information in the iMac before I can access its files from a Windows PC.
I have searched the internet for days trying to find an answer to this question. Although the problem seems to be fairly common, no solutions have been found.

Unable to start the weblogic server from windows environment

Hi All,
In our training system we have installed the SOA 11g and it worked fine till today afternoon. We have logged off the admin user in windows account and logged with our login credentials into windows after that we are unable to start the weblogic server.
- Earlier in the DOS command prompt we used to navigate to the path where the startWeblogic.cmd file located and then we execute the command, after that we will able to see the status message as RUNNING MODE in the bottom of the screen, and when ever we deploy an project using Jdeveloper in the weblogic server window some messages will appended based on the action.
- Only when we issue the command to shut down the weblogic server at that time only the command will be back to the path from where we started the server.
- After login to windows with our account, when we tried to start the weblogic server, it didn't throw any error instead of that after running few lines in the command window the prompt was back in to the (D:\Middleware\.....\Domains\bin)path from where we ran the command to start the server.
Please help us to resolve the issue asap.
Thanks in advance.
Regards,
Sathyaseelan

Hi,
Make sure that the user which you are using to start weblogic server should be part of Administrator group or the group to which your admin user belongs to.
Regards,
Kishore

Unable to partition drive for Boot Camp / Windows XP installation

I need to install Windows XP on my MacBook so that I can run MS Access 2007 for an online college course I'm taking.
When I attempt to partition (it doesn't seem to matter what size I choose to make the Windows partition), I get a message that the "The disk cannot be partitioned because some files cannot be moved," and that I should "back up the hard drive and format it as a single Mac OS Extended (Journaled) volume" and "restore information to the disk and try using Boot Camp Assistant again."
When I open Disk Utility and examine the information for the hard drive, it lists the File System as "Mac OS Extended (Journaled)." The "Supports Journaling" and "Journaled" fields are also listed as "Yes."
I'm not sure how to proceed. I have used Time Machine to back up the hard disk, but I see no option in Disk Utility to format the drive, and it doesn't appear that it needs to be formatted.
Has anyone else encountered this issue or have any ideas what might be causing it?

The part you need to follow: backup and reinitialize
You need unfragmented contiguous free space and it isn't, and some file(s) may be locked and can't be moved.
Booting from another hard drive and buy/use iDefrag is a 'maybe.'
Clone the drive and restore the clone with RESTORE in Disk Utility (from your OS X DVD) or TimeMachine or SuperDuper (or Carbon Copy Cloner).
Maybe you are better off just using XP in a VM like free VirtualBox instead of running XP native on its own partition.

Help! External hard drives lost formatting from windows!?!!

I have Windows installed on my macbook through bootcamp, and i was trying to get my external hard drives (formatted as HFS+) to connect through macdrive. I have 2 500GB WD firewire drives
anyway in the process windows did something and now my drives seem to be unrecognised in os x. I had disk management up in windows and a popup came up to do with the formatting of the drive (whether it was GUID partition table or Master boot record). I click GPT thinking that's what it was and it won't do anything anyway. Well boy was I wrong.
I don't exactly know what it's done, but now OS X won't recognise the drives and there seems to be a 128MB partition labelled disk2s1 that disk utility recognises. it won't allow me to run disk first aid on it at all. Photo link: http://img.hibalazs.net/uploads/b8a8fbef2d979644.jpg
So what can I do? The data is obviously still there but how can I restore the formatting on the drive so OS X will recognise it? Any help is appreciated.

Managed to fix the problem by finding the partition using TestDisk and then writing the partition map in pdisk. Worked like a charm, followed this guide: http://perrohunter.com/?p=technology/repair-a-mac-os-x-hfs-partition-table

Bootcamp unable to access my OSX files from Windows

I recently reinstalled Windows on my Macbook (Mid 2013) after it got formatted as I sent it to repair, however after reinstalling the system, I cannot seem to access my files from my OSX partition when I'm on Windows. I used to be able to do this but, not anymore. PLEASE HELP.

Please see windows 8 does not recognise Macintosh HD, No drive Letter.

My DVD/CD RW drive has dissapeared from Windows. Help!

Somewhere during messing around trying to get a faulty Floppy Drive to work, now my DVD drive no longer shows up in Windows or is a recognized IDE during POST. I had to reconnect the cables a couple times while manuevering the Floppy cable and I also tried out some different nForce drivers. Im not sure which triggered it but I think I got a sign something went wrong rebooting windows during this troubleshooting stretch. Windows froze for the first time during load up and gave me that "Windows didnt load properly" message and something about the hardware changing. I thought maybe my Floppy was going to work now (it didnt) and then I noticed my DVD drive was no where to be found in My Computer. Oh boy.
So I made sure the IDE cable was connected properly, no change. I rolled back to the initial driver set, no change. Not sure what route to go next. The power light comes on and the drive ejects properly. The mobo just doesnt think its connected for some reason. Round cable gone bad? I hope my board isnt the culprite. Any help on this would be appreciated.

Could be the cable or could be the pins on the DVD drive (assuming your bios is set correctly). This problem would not be caused by windows if your bios isn't detecting it. I would pull the drive out and check the pins. If memory serves me there should be ONE missing. If it is more than that you will need to replace the drive. You could also try plugging it in on the same cable as the hard drive (make sure you switch it to slave) and see whether or not it is detected. That would rule out the cable.
Good Luck and post your results
Jeremy

Can't print & can't see USB flash drives plugged in from Windows partition

My uncle has installed Windows XP professional through Bootcamp on his new MacBook w/ Snow Leopard. He gets to it through Parallels. Everything works perfectly, except he can't print to the same printer that the Mac prints to, and also, when in Windows, the os won't recognize USB flash drives that are plugged into the MacBook either. He has the latest Windows printer drivers installed for the printer he is trying to print to and still won't work. He needs both of these up and running immediately. I convinced him to get a Mac. Apple fam...HELP!!!
Thanks.
Smartmediaman

Hi,
since Parallels is not an Apple product it would be ebtter to ask such questions in the Parallels support forum.
Nonetheless:
using USB devices: http://kb.parallels.com/en/5161
using Printers: http://kb.parallels.com/en/4990
Regards
Stefan

Unable to change domain logon password from Windows 8.1 system

We are facing a new problem in our domain. Users working on windows 8.1 platform are not able to change the password and getting an error "the security database on the server does not have a computer for this workstation". I tried deleting the
computer from domain and rejoined to the domain but did not help.
We are running Windows 2008 standard 64 bit Domain Controller and Active Directory functional level is Windows Server 2003. Please help with a solution.

Thanks Marius, but we do not have R2.. It is just Win 2008 Std with SP2
The same applies to Windows Server 2003 and Windows Server 2008 as well so far I know, you have to call Microsoft and ask for back-port hotfix. Can you check if the password has been updated for the krbtgt account?
You can use repadmin lik this, just replace the DCNAME and the DN to much your own environment:
repadmin /showobjmeta eur-fle-dc02 "CN=krbtgt,CN=users,DC=e
r,DC=corp,DC=chrisse,DC=com"
35 entries.
Loc.USN Originating DSA Org.USN Org.Time/Date
Ver Attribute
======= =============== ========= =============
=== =========
7202 dc95de70-859e-4f39-a489-73380dd1896f 12299 2005-03-19 16:40:16
2 unicodePwd
Note "2" for unicodePwd it means that the password for the account has been updated 2 times.
If the above doesn't apply to you, have you changed any ACLs recently? and dose it work on Windows 7 for example?
Enfo Zipper
Christoffer Andersson – Principal Advisor
http://blogs.chrisse.se - Directory Services Blog

My driver is missing from windows 7

Cant plug phone into computer says cant find bluetooth driver Phone is in devices but syas needs troubleshooting dont know where to download driver info cant get phone recognized in itunes please help

It's really not clear what you're asking. You talk about plugging the iPhone into the computer and then about Bluetooth. Which is it? Or both?
You cannot pair an iPhone to a computer using Bluetooth for anything but using it as a cellular modem. To connect an iPhone for synching with iTunes, use the cable that came with the device. If the computer doesn't recognize the iPhone, follow these steps: iOS: Device not recognized in iTunes for Windows
If you want to wirelessly sync to iTunes, you must use WiFi. Follow these instructions: iOS: Syncing your data with iTunes

Unable to map drive to 4100 from Windows

Similar Messages

Maybe you are looking for