Unable to Merge Calls in iOS 7.1 on iphone5s

Hi,
I am trying to conference call in ios 7.1 on iphone 5s.it doesnt work.
could you please advise,
Thanks,Sarath.

I am having a somewhat similar problem. Only started w/ iOS 7.1 upgrade.
I dial the first party. When I try to dial the second party, the first party is dropped and I get an error message "Call Failed." iPhone 5S. Have rebooted phone etc. Happens with every call regardless of signal strength, who the parties are etc

Similar Messages

  • Unable to Merge call using nokia lumia 920

    Hi,
    I am unable to merge call using Nokia lumia 920. I tried to restart the phone change the network still the same issue any suggestions to make this happen is much appriciated

    Merging calls is a network function and needs to be both enabled and available.
    Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

  • Merge call not working in ios7 on Iphone5

    Merge call not working in ios7 on Iphone5 ?

    Same here. We have this call center in our company where after i have added a call to merge i have to push no. 4 and dial from the keypad. This has never been possible in ios but it have been possible to create a contact called "Merge" and add number 4 as it's phone number. Now by merging first my clients call to my collegegue and then to this "Merge" contact it has been dropping me out of line and my client and collegue are merged.
    Now ios 7 wont let me call to this "Merge" contact's number "4"

  • Unable to merge contacts in iOS 5

    I recently upgraded to Lion and also purchased an iPhone 4s. I tried syncing my contats through itunes and via the cloud, but it would not merge only overwrite. Any suggestion to get my iPhone contacts to merge with my Lion address book??

    Nevermind. It's fixed.

  • I am unable to merge the call after adding in iphone 4 , can anybody help me ?

    Unable to merge call for conference after adding new call . Can anybody help ?

    Conference calls With GSM, you can set up a conference call with up to five people at a time, depending on your carrier.
    Create a conference call: While on a call, tap Add Call, make another call, then tap Merge Calls. Repeat to add more people to the conference.
    Drop one person: Tap Conference, tap next to a person, then tap End Call.
    Talk privately with one person: Tap Conference, then tap Private next to the person. Tap Merge Calls to resume the conference.
    Add an incoming caller: Tap Hold Call + Answer, then tap Merge Calls. Note: You can’t make a FaceTime video call when you’re on a conference call

  • Seeking iPhone 4S merge call assistance

    I am unable to merge calls on my iPhone 4S - I hit merge calls and nothing happens. I am running 5.1.1 - because I loooove google maps and can't part with them. The new update takes them away.

    Use this link http://manuals.info.apple.com/en_US/iphone_user_guide.pdf to the User Guide. On page 45 are the instructions for first adding a call, then merging. Are you adding the second call before trying to merge? What other troubleshooting have you done. I understand your reluctance to perform a restore since that will update your iOS, but have you done a reset? Hold the sleep/wake and home buttons together until you see the Apple logo and then release. This will have no affect on your data. Try the merge after that. If it will not connect after that, are you are following the instructions in the User Guide, you would have no other choice but to restore.

  • IOS 4 - no longer able to merge calls on a 3G

    Since the upgrade to IOS 4, my iPhone 3G refuses to merge calls. When I push on 'merge' it simply switches from on line to the other...

    Add-ons are the responsibility of their authors. McAfee does not even put their extension on http://addons.mozilla.org you had to install it from their site.
    Disable "McAfee Site Advisor" extension which was just updated to 3.4.0, which probably took it out of the addons block list.
    * "Ctrl+Shift+A" > find McAfee Site Advisor and use "Disable", and then restart Firefox.
    * Do a Google Search no problem
    * It seems that if you re-enable Site Advisor again, and restart Firefox you are okay. At least you know where to look if you get the error again or Google searches slow down.

  • Cannot merge calls with iphone5

    Cannot merge calls even after i updates the ios to 7.1

    What you are talking about is a carrier function.  Make sure that your account is properly set up by them.

  • Merge calls is not working in my iphone

    merge calls is not working in my i phone i checked it for 5 times not working help me i am new for this

    Hello naveen_199155,
    Welcome to the Apple Support Communities!
    I understand that you would like to merge calls together on your iPhone, but it is not working as expected. There are a couple of different resources I would suggest reading over in this situation. 
    First, depending on whether you have a GSM network iPhone or a CDMA network iPhone, the Conference calls feature may work differently. Please review the first attached article for this information. 
    iPhone: Understanding phone features - Apple Support
    Conference calls
    Supports up to five calls simultaneously
    Supports up to two calls simultaneously.
    CDMA networks may not be able to add, swap, or merge calls in certain situations. See the iPhone user guide for more details.
    Another valuable resource, just to ensure the correct steps are being taken to set up a conference call, is the iOS 8 User Guide (page 51). Please read over this for more information on the process as well as why the feature may not be working if you are using a CDMA iPhone. 
    manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
    Have a great day,
    Joe

  • I am suddenly unable to receive calls on my iPhone 4S.  Is it possible that the age of the phone will affect its ability to receive calls? HELP!

    I am suddenly unable to receive calls on my iPhone 4S. 
    I have spent 2 hour-long sessions with technical support and although they were very nice, it is still not fixed.
    When I try to call the phone from a land line, it doesn't ring AND it doesn't recognize that a call is coming in (no missed call) BUT if I leave a message, it records it.
    Is it possible that the age of the phone will affect its ability to receive calls?
    HELP!

        MarketingMary,
    I am truly sorry to hear that your are unable to receive calls on your device. Thank you tbo27 for providing great troubleshooting steps. Making sure call forwarding is not active by dial *73 is great. Have you already reset network settings also? http://vz.to/RTz70g Are you able to make calls fine? Make sure Do not Disturb is not active. Settings>Do Not Disturb
    LindseyT_VZW
    Follow us on Twitter @VZWSupport

  • I can't set up voice mail on my iphone 5s. And can't merge calls either

    I can't set up voice mail box on my iphone 5s .
    And I can't merge calls .

    Both of those functions are carrier dependent so you may want to contact your cellular carrier.

  • Jabber for Windows 9.2.2 - Unable to make calls from PC

    I have implement CUCM 9.1(1a) and CUP 9.1(1a)
    I can make calls if i used desk phone for calls but iam unable to make calls whet i turn the option use pc to make calls
    p.s: i have set up CCMCIP  (CUCM ip address) for all users.

    i cant place calls via CSF (jabber) !!!!  the softphone mode is ok
    the problem i think is here when i turn to "csf" mode : 
    but in the the softphone mode :
    172.30.1.242 - is my CUCM ip address.
    Thanks in advance
    Best Regards
    Christos

  • My iphone 3g is showing no service all of a sudden.. i am unable to make calls. please help...

    My iphone 3g is showing no service all of a sudden. i am unable to make calls. my iphone has turned out to a simple ipod. pls help. ...

    My iphone 3g is showing no service all of a sudden. i am unable to make calls. my iphone has turned out to a simple ipod. pls help. ...

  • Unable to Supervise & Restore Backup. iOS 7-7.0.2 Configurator 1.4

    I have just finished a deployment of 530 iPad 4's in the school where I work. Everything went fine with 6.1.3 and configurator 1.3. Since then, configurator has automatically downloaded and installed iOS 7... Which would be fine, if it worked.
    I figured out all issues related to the activation and no longer have issues there.
    The steps I go through are as follows:
    Supervise a device.
    Make setting changes (like disabling keyboard clicks)
    Restore Backup
    Prepare for new devices by enabling supervision, restoring backup, and selecting the profile from configurator to install
    Plug it in, and wait.
    It fails every time at the "waiting for device to respond" stage. The error it gives is that the USB cable is unplugged. I have even elminated my hub and am trying to do this straght from the Macbook Pro.
    I am also unable to revert back to iOS 6.1.3... I have tried everything on the internet listed and it still fails at the screen that says:
    On top of all of those issues, the kids that have updated to iOS 7 are all having issues downloading apps... I made sure that my MDM is enabling installing apps... they can go to the app store, but when they download them it just says unable to download and gives the option of Retry or Done. Any advice for this issue?
    Please help.. I have to make sure every kid has an iPad and can install the apps they need for school. I am just about out of options... APPLE... ANYONE??? Can I downgrade back to Configurator 1.3 somehow? HELP!

    Hi MrMeansMTA,
    Yeah, there are a lot of issues that many of us in schools are experiencing. See this post for a collection of issues that we are hoping Apple will fix. You should add your issues to the list: https://discussions.apple.com/thread/5379636?tstart=0
    Regarding your attempt to downgrade to 6.1.3... unfortunately Apple has stopped signing all versions of iOS 6 for iPad. So even with a complete wipe of an iOS 7 iPad in an attempt to restore an old iOS 6 encrypted backup, a restore via iTunes will force the device to check in with Apple and the latest version of iOS 7 will install on the iPad. I've also tried importing an old ipsw file for 6.1.3 into iTunes and into Apple Configurator to try and force loading iOS 6.1.3, but niether iTunes or Apple Configurator will install it.
    And with Apple Configurator even if you were able to downgrade to AC v1.3, it doesn't work with iOS 7...only v1.4 works with iOS 7. So unfortunately once an iPad is updated to iOS 7 we are all forced to upgrade AC to v1.4.
    As far as the downloading apps issue, the times that I have seen this are when the app isn't compatible with the iOS version on the iPad. For example, an iPad on iOS 6.1.3 trying to download an app that only works with iOS 7 will get the "Unable to download - Retry or Done" message. I wonder if the opposite is happening in your case... where an app isn't iOS 7 compatible yet and they are trying to download a version for iOS 6 or earlier. On top of that, I would recommend the student try a "reset" (different from restarting) on their iPads (Hold down on both the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears. When you see the Apple logo on the black screen, let go of the buttons. This “reset” fixes a lot of iPad issues).
    Another possibility for this error could be due to your web filter settings. Did you attempt to block iOS updates with your web filter? You or your network engineer may have inadvertently blocked app installs. Check with your filter guy to see what the settings are.
    Hope this helps. We're all struggling through this and feel your pain!! Good luck man.
    ~Joe

  • I am unable to merge events running iPhoto '11 - 9.4.2 (710.42) and Mountain Lion, 10.8.2. All options on the events down menu are greyed out and I am therefore unable to merge any events. Is there a solution?

    I am unable to merge events as all drop downs in the events selection in the tool bar are greyed out. Is there a solution?

    Thank you.
    I tried to drag one event into another event but was unable to do so. The event that I tried to move into a second one would only move to another position in the event columnn, but it would not merge into another one.

Maybe you are looking for

  • How do I get my video playlists back on iPod Touch 4G after (epic fail) iOS6 update

    As other users have identified, playlists present on iTunes on laptop but not on iPod touch 4G after iOS6 update except when select edit. Can I get them back? Not wasting time messing around. Either this is easily sortable or I get a new player from

  • Issues with DBConsole not starting

    My dbconsole service will not start. I tried to reconfigure it by using this command: emca -config dbcontrol db -repos recreate and I am receiving these errors: E:\METANEO2\product\11.2.0\dbhome_1\BIN>emca -config dbcontrol db -repos recreat e STARTE

  • Premiere Elements 10 Trial Slow To Draw Timeline

    Problems with Premiere Elements 10 Trial being slow to draw the timeline when scrolling up or down or sideways. One fix I've read said to "disable desktop composition" in the Compatibility tab of the Properties window from the PE shortcut icon. But t

  • KOB1 - Report currency

    Hi All, I have two company codes 1000(GBP) and 2000(EUR). For co.code 1000 we are using GBP as currency and for 2000 we are using EUR as currency.  We are using the common controling area 9000 for the above two co.codes.For controlling area we are us

  • Windows 7 won't boot up

    I was having trouble with audio ads. So I deleted the svchost.ext file. but I then suspended the Dcom file associated to it. Because of all of this, my computer will not boot up into windows. I can get into safe mode but that won't start up into wind