Unable to minimize or close version 3.6.3

Version 3.6.3 - I am unable to minimize or close the browser, I have to use task manager to close it. I am able to open additional tabs within the window.

Images in received emails are only visible if included in an HTML message.
If they appear as an attachment icon just double-click them and they should open in Preview.

Similar Messages

Missing maximize, minimize and close buttons

I see that people have been having problems with these issues before the finalized FF4, I have the most updated version on my PC. The answers all seem to say it was a problem with beta versions. When I stay online for long periods of time my full screen, minimize and close buttons disappear. I have 2 screens and have found that when I pull a tab to the other screen the buttons reappear with that tab. But all the tabs still on previous screens are still missing. If I pull the whole set of tabs (opened together) I still can not get the buttons to reappear. when I am ready to close all the open tabs at once I use task manager and close down FF4. Right now I see my background screen where the button should be.

Make sure that you do not run Firefox in full screen mode (press F11 or Fn + F11 to toggle; Mac: Command+Shift+F).
*https://support.mozilla.org/kb/how-to-use-full-screen
If you are in full screen mode then hover the mouse to the top of the screen to make the Navigation Toolbar and Tab bar appear.<br>Click the Maximize button (top right corner of the Navigation Toolbar) to leave full screen mode or right-click empty space on a toolbar and choose "Exit Full Screen Mode" or press the F11 key.
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You can also try a different Windows theme.

I cannot move, resize, minimize, or close the browser window despite everything inside the window still working.

I don't know what details are needed so I'll just rattle off anything that I can think of.
I am running an Asus laptop with windows 7. I have never had an issue with firefox in the past (beyond the usual freezing and some obvious issues with pop up ads that are par for the course with firefox since adblocker never does what it says.... not really. Lets be honest.) I am using Avast for my virus protection and it is also up to date.
My issue started about an hour ago when firefox stopped responding. The video I had playing kept going but I could not interact with anything. Assuming the program froze for the billionth time that week I rebooted it. This has always solved freezing issues in the past. Now, however, firefox is doing something new.
I can access the menus and almost everything on the window itself except for the minimize/maximize/close buttons, I cannot move the window at all, and I cannot manually resize it. I have also noticed that although videos will play, I can only click on their buttons if there is another smaller window overtop of firefox. The video controls will only appear that way and when I click them firefox naturally comes to the front and the video responds with the button I used but the buttons are gone again and I cannot resume playing without the smaller window back in front to make the buttons show again.
It's as if half of firefox is frozen while the other half is still running somehow.
I have no themes that could be causing this. Literally none. I only use firefox for the things that can no longer be opened in Opera so I have no need for any theme beyond default. The only addons I installed on purpose were adblockers (lord knows why. they don't DO anything.) though several other random things seem to have been installed over time to aid in one thing or another. Various plugins and players and versions of java, that sort of thing. But I have everything (and i mean EVERYTHING) in the addon menu disabled.
I have tried booting it up in safe mode (the program, not windows) and the problem is still there except now it won't show the menu bar at all unless I press the alt key first and even then it wont let me actually click on anything in the menu bar. When I try the whole bar vanishes. I had to close firefox with the task manager.
Rebooting will fix the issue for about 15 seconds before it all comes back.
Any attempts at updating have failed as it says I am already up to date on everything so I don't know what its issue is.
It's not an urgent issue right now as most of what i need to do can be done on the half screen window I am using, but some of my sites have buttons that literally vanish in anything but full screen and I imagine that this will be a much greater annoyance within a few days.

After following all the instructions given, I poked around safe websites as suggested. I am not sure why this step was needed, as websites functioned rather normally before I came here but I did it anyways and found that the websites still work the same as they did. I can still do everything I used to be able to do. I see no change in the function of the websites.
However, I still cannot resize, close, or move the browser window. I don't know if Netflix is a safe site or not (too many conflicting opinions on that one from the masses) so I don't know if the issue with the vanishing buttons is still there, but all the issues I had with the browser window itself is still there.
Even in safe mode the browsers three window control buttons on the top right refuse to let me use them and the window itself will refuse to be moved around.

Crashing on minimize or close

InDesign crashes every time I minimize or close. So I can't open more than one file at a time : (

Which OS and version of Indesign are you using.....
Have you tried resetting the preferences:--
These are normally hidden files, so you will need to set your system to show them. They will be found in various places depending on the OS, and the version of InDesign.
InDesign Defaults:
Windows XP: C:\Documents and Settings\<USER>\Application Data\Adobe\InDesign\<Version #>\<language>\ (Note: Prior to version 6 [CS4] the language folder is not used).
Windows Vista or Windows 7: C:\Users\<USER>\AppData\Roaming\Adobe\InDesign\<Version #>\<Language>\ (Note: Prior to version 6 [CS4] the language folder is not used).
Macintosh: Hard Drive/Users/<USER>/Library/Preferences/Adobe InDesign/<Version #>/<Language>/(Note: Prior to version 6 [CS4] the language folder is not used).
InDesign SavedData:
Windows XP: C:\Documents and Settings\<USER>\Local Settings\Application Data\Adobe\InDesign\<Version #>\<Language>\Caches\ (Note: Prior to version 6 [CS4] the language folder is not used).
Windows Vista or Windows 7: C:\Users\<USER>\AppData\Local\Adobe\InDesign\<Version #>\<Language>\Caches\ (Note: Prior to version 6 [CS4] the language folder is not used).
Macintosh: Hard Drive/Users/Library/Caches/Adobe InDesign/<Version #>/<Language>/ (Note: Prior to version 6 [CS4] the language folder is not used).

Why do the minimize, maximize, & close buttons in the top right corner disappear (turn to a black void) unless FF is maximized?

I am running Windows 7 on my new laptop. When I bought it back in August, I installed Firefox version 5 (I think) Now that I have updated to version 6, the minimize, maximize, & close buttons in the top right corner disappear when the window is not maximized. It becomes a black space where the buttons should be.

Hi Kossa,
You can also check if the issue occurs in
Clean Boot. If the issue disappears in the Clean Boot environment, you can continue to narrow down which entry is causing the issue.
Besides, uninstall it and re-download
a fresh copy of FireFox to check the result. If the issue still exists, create a new user account to see if it occurs.
If the issue persists, you can contact Mozilla Support directly and use Internet Explorer (IE) during the time.
J
Please Note: The third-party product discussed here is manufactured by a company that is independent of Microsoft. We make no warranty, implied or otherwise,
regarding this product's performance or reliability.
Regards,
Linda

Proxy error- unable to find software component version for namespace-

Hi all,
I need help regarding proxy.
I am using SAP standard package for one integration PI 7.0 to SRM.
Here we need to use the datatype enhancement for adding some fields. So I create one extension_datatype in the datatype enhancement and add the fields .
( I am using Inbount interface, where I am adding the new fields in PI)
Now when I go to SRM system and Run SPROXY system to regenerate the Proxy. So that It can reload the New fields.
Then it reloads and We activate the same.
Now at one place when I clicked the data type enhancement object its giving the error that unable to find software component version for namespace" . I did not understand why its giving the error. I added the new fields in the existing running datatype enhancement. and reload the reproxy.
I have one more datatype enhancement object in the same software component and in the same name space but its not giving the error.
Please help , how to resolve it asap.
regards
ram

1.the datatype enhancement object may not be activated in the same software component .
for this try these -
after creating your data types and designing part. First close all the developement objects windows.
then click on your sw component which you have created and activate it very first.
then you will be able to activate all other objects
or when you start activating your data types a new window with list of the objects which you want to activate opens
in this new window you can see your sw component as the very last object select it first and activate it
2. update the cache in both system
i think these 2 reasons.u try it.

The main problem I am having is just opening and completing my emails. The screen freezes and I can't do anything but minimize and close.

After I close the window/s the report error window pops up . Then the next one which tells me the report was sent. Then the options to go further and so I came here today and Now I have done what you said to do so far. I even updated Acrobat reader and Flash player. I have used Mozilla Firefox for years and never had any trouble like this. This is the way windows behaves on a regular basis and is why I changed to Linux for years. I got this computer a couple years ago and did not have any trouble. Recently I have this to deal with several times every day. I cannot close the window in upper right corner without bringing up more error windows. So I minimize and close at the bottom. It still takes way too long, but it finally closes. I hope this helps you , I don't know what else I could tell you, Thank s for your time.
Deb

Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

When trying to install itunes on my PC, I get the message (unable to remove the older version of Bonjour as well as the message unable to remove the older version of Apple software update). Please advise how to proceed.

Please help with this problem. When trying to install itunes on my HP520 PC, I get the error message (unable to remove the older version of Bonjour as well as the message unable to remove the older version of Apple software update).

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get aCode 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any Apple Software Updateentries and click "Remove", as per the following screenshot:
Next, select any Bonjour entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install using an iTunesSetup.exe (or iTunes64Setup.exe) downloaded from the Apple Website:
http://www.apple.com/itunes/download/
Does it go through properly this time?

I am unable to download the new version of Adobe since I do not recall my password and am unable to retrieve it. Can you help me? I need the new version to utilize programs.

I am unable to download the new version of Adobe since I do not recall my password. I was prompted to click on the question mark in the password field but there was none. How do I resolve this issue?

Are you talking about a Mac password or a password for Adobe's website or something?

Unable to install the latest version of Adobe Muse via Adobe Application Manager

I´m a user of Creative Suite applications and all of them have been updated successfully with the exception of the latest version of Adobe Muse.
I´m unable to install it. I get error DW 050
I´m using Windows 7 64 bit.
All previous versions of Adobe Muse have been installed OK.
Following a forum discussion I could read, I uninstalled the previous version, but the installation fails again.
Does any body know how to solve this issue?

Dear Sachin:
Thank you for your help, however I have to get back to you to inform that after downloading the new package based on the link that you´ve provided, I´m still unable to execute the application. I get the message: “block by the administrator” and also another message: “the editor of this program is unknown and unsafe”. Please note that all other programs from Adobe´s Creative Cloud have been downloaded and installed with success. All Adobe Creative programs have been installed on my computer several months ago and all are working fine so far. This morning I installed an update for Photoshop without any problem. It seems that the problem persists only with Muse. I have to highlight that I´m the administrator of my PC and therefore all applications are currently being executed as administrator. I have never had the intention to block any program, including obviously Adobe´s Creative Suite programs.
Could you please let me know how to splve this problem?
Michael.
De: Sachin Hasija [email protected]
Enviado el: lunes, 28 de enero de 2013 18:57
Para: retonxxy
Asunto: Unable to install the latest version of Adobe Muse via Adobe Application Manager
Re: Unable to install the latest version of Adobe Muse via Adobe Application Manager
created by Sachin Hasija <http://forums.adobe.com/people/Sachin+Hasija> in Help with using Adobe Muse - View the full discussion <http://forums.adobe.com/message/5028441#5028441

Sun Studio (12,1) is unable to find a supported version of the Netbeans IDE

Hi all,
We're working on upgrading both the hardware and software on our application currently, and part of this involves upgrading our compiler to Sun Studio 12.1. I downloaded
SunStudio12u1-SunOS-SPARC-pkgs-ML.tar.bz2
from the Sun website and we installed it into the following location on our server:
/opt/compiler/sunstudio12.1
I successfully compiled all my code using the compiler, however, when I try to launch the debugger by typing ./sunstudio in the 'bin' directory, I get the following error:
{opt/compiler/sunstudio12.1/bin}./sunstudio
Sun Studio is unable to find a supported version of the NetBeans IDE.
Sun Studio requires a NetBeans IDE version 6.5.1 with NetBeans C/C++ module (cnd
2) enabled.
Sun Studio looks for a valid NetBeans IDE installation in the following order:
1) Location specified with --netbeanshome command line option
2) At /opt/compiler/sunstudio12.1/netbeans
I have seen references to executing 'prepare_system' on forums while I was trying to investigate this, but when our sys admin folks try to execute the command, it does not work (command not found). They've mentioned that they expected a prepare_system script in the directory where we untarred the downloaded sun studio tarfile, but it is not there:
drwxrwxr-x 4 59001 staff 1024 Aug 20 2009 .
drwxr-xr-x 3 yu12 lifecad 1024 Jul 2 09:48 ..
drwxrwxr-x 4 59001 staff 1024 Aug 17 2009 LEGAL
-rw-rw-r-- 1 59001 staff 3985 Aug 19 2009 SS12u1_README-pkgs.txt
-rw-r--r-- 1 59001 staff 5598 Aug 20 2009 SS12u1_README-pkgs_ja.html
-rw-r--r-- 1 59001 staff 4155 Aug 20 2009 SS12u1_README-pkgs_zh.html
-rwxrwxr-x 1 59001 staff 517979136 Aug 6 2009 SunStudio12u1-SunOS-SPARC-pkgs.sh
-rwxrwxr-x 1 59001 staff 11814 Aug 6 2009 install_patches.sh
drwxrwxr-x 5 59001 staff 96 Aug 17 2009 patches
I can see a netbeans directory was created as part of the install, but I'm not sure why sun studio thinks netbeans is not available (afraid my knowledge about netbeans is practically non existent):
{opt/compiler/sunstudio12.1/netbeans}ls -l
total 6062
drwxr-x--- 2 root root 512 Apr 5 11:14 bin
drwxr-x--- 7 root root 512 Apr 5 11:14 cnd2
-rw-rw-r-- 1 root root 5254 Mar 5 2009 CREDITS_ja.html
-rw-rw-r-- 1 root root 5175 Mar 5 2009 CREDITS_pt_BR.html
-rw-rw-r-- 1 root root 4908 Mar 5 2009 CREDITS_zh_CN.html
-rw-rw-r-- 1 root root 5434 Mar 5 2009 CREDITS.html
-rw-rw-r-- 1 root root 1717 Mar 5 2009 DISTRIBUTION.txt
-rw-rw-r-- 1 root root 0 Aug 6 2009 dummy
drwxr-x--- 2 root root 512 Apr 5 11:14 etc
drwxr-x--- 7 root root 512 Apr 5 11:14 gsf1
drwxr-x--- 6 root root 512 Apr 5 11:14 ide10
-rw-rw-r-- 1 root root 1845 Mar 5 2009 LEGALNOTICE.txt
-rw-rw-r-- 1 root root 64275 Mar 5 2009 LICENSE.txt
-rw-rw-r-- 1 root root 37141 Mar 5 2009 moduleCluster.properties
drwxr-x--- 7 root root 512 Apr 5 11:14 nb6.5
-rw-rw-r-- 1 root root 15822 Mar 5 2009 netbeans.css
drwxr-x--- 8 root root 512 Apr 5 11:14 platform9
-rw-rw-r-- 1 root root 6141 Mar 5 2009 README_ja.html
-rw-rw-r-- 1 root root 5692 Mar 5 2009 README_pt_BR.html
-rw-rw-r-- 1 root root 5122 Mar 5 2009 README_zh_CN.html
-rw-rw-r-- 1 root root 5155 Mar 5 2009 README.html
-rw-rw-r-- 1 root root 2913280 Mar 5 2009 THIRDPARTYLICENSE.txt
drwxr-x--- 5 root root 512 Apr 5 11:14 websvccommon1
Our server details are:
{opt/compiler}uname -a
SunOS a03714 5.10 Generic_142900-03 sun4v sparc SUNW,T5440
Any advice appreciated on how to get the debugger working. Ideally, I'd prefer not to uninstall / reinstall if at all possible as we're about to start system testing our executables, and I think a reinstall would require more unit teting and delays to our project (yikes!). But any input would be appreciated here.
Thanks,
Brendan.

Hi David,
First off - thanks for the response. I do have some follow up questions if you don't mind though:
1. When you say the install is corrupted, do you suspect
- the file I downloaded from the website either was corrupted, or was not the correct file for my platform
- the procedure used to install the software was incorrect
- something else
2. Is there a logfile that the sun studio install creates which would indicate an error during the installation procedure? I'm sure our admins who performed the install would have shouted if an error was logged... but on the offchance that the installation does not 'shout loudly' for some errors, I'd like to see a log of the error. At a minimum, I'd expect it to say why the install failed, and what we need to modify to ensure a successful install next time 'round.
3. I successfully compiled my code using the C compiler from the install. My unit tests also look good... does this suggest that the install was at least a partial success, and would you suspect that my recompiled executables are reliable, despite the fact that I cannot launch the IDE?
4. Today, one of our admins telnetted to our unix server - not via exceed by the way, but he did try the following test:
- set his display env variable (he knew he would not get a display however)
- executed the sunstudio script
He did not get the netbeans error, and the process appeared to be running (as I mentioned, without a display) until he killed it. I've asked if they can repeat the test using an exceed session. I thought there may be something on his $PATH that I did not have - unfortunately this was not the case (although, he may have access as 'root' to something that I require to launch the IDE). My question is, would you expect this behaviour if the install was corrupted?
Let me know what you think.
Thanks,
Brendan.

Unable to read software component versions from System Landscape Directory

Hi XI,
Once I could import software component version but now I can't. Maybe I did something wrong in SLD.
Could you please give me some hints?
Thanks,
Bruce

hi,
i have also problem with "import software componenet version "
i got a message like
"unable to import software component version from
system landscape directory ......."
than i gone for SLDCHECK...i got an error it is ............
calling function LCR_LIST_BUSSINESS_SYSTEM
Retreiveing data from the sld server function call returned exception code 4
connection to sld does not work
check sld function and configuration
what that i have to do ...to make it work ....please give me any solution for that please give me detailed info
with regards
Edited by: praneeth mamgunta on Jun 27, 2008 4:04 PM
Edited by: praneeth mamgunta on Jun 27, 2008 4:07 PM

Unable to read software component version from System Landscape Directory "

I've worked in past creating/importing SWCV, but this is new system PI7.0 and stuck.
A) Is my understanding on resolution correct?
Should I go and apply notes 940309 and create client copy of existing client 001
                                    OR
change role of client 001; SXMB_ADMIN -> 'Integration Engine Configuration' to 'Integration Server'
I have no problem in using client 001 as Integration server, all I want is import of SWCV to work. Thanks. Appreciate the help.
B) Here is what I have done and the error:
1) Followed weblog below and created product, software component, technical system, business sytem in SLD.
/people/srinivas.vanamala2/blog/2007/02/05/step-by-step-guide-xml-file-2-xml-file-scenario-part-i
2) When I import the SWC from integration repository getting error
(Unable to read software component version from System Landscape Directory "server:5<system number>00").
C) Pointers used from the forum to debug the issue, but still no luck
Below are the points checked from the forum and all steps are correct, but still have issues with the import
1) check the RFCs SAPSLDAPI, LCRSAPRFC, connection test pass as the program ID registered with Jco
2) T-code SLDCHECK no errors (followed http://help.sap.com/saphelp_nw04/helpdata/de/78/20244134a56532e10000000a1550b0/content.htm)
3) T-code SLDAPICUST got user PIAPPLUSER, pwd is correct (reset the pwd)
4) logged using PIAPPLUSER http://server:port/sld and it works
5) One of the weblog SLD Check Failed (LCR_LIST_BUSINESS_SYSTEMS function doesn't work) referred to apply notes 940309
Notes: 940309
You are installing 'SAP NetWeaver 2004s SR1 ABAP+Java' Usage Type 'NetWeaver Process Integration (PI)'.
You don't want to use the default client 001, but another client as Integration Server.

applied portion (PIPostInstallProcess) of OSS notes 940309 and it resolved.
Note:
I still retained client 001 and didn't do client copy as mentioned in the notes. The wizard based CTC tool helped. Here are the details if someone has similar issue and want to know further details:
A NetWeaver Process Integration (PI) Installation (ABAP+Java) has two parts: Installation and configuration. The former is done by the Installer, the latter by the 'Central Template Configuration' (CTC) Tool.
http://help.sap.com/saphelp_nw04s/helpdata/en/14/39084136b5f423e10000000a155106/frameset.htm
1.      Call the wizard-based configuration tool as described in Configuration Wizard.
       2.      Select the scenario PI and the task PIPostInstallProcess.
       3.      Choose Execute.
A list of the steps to be executed by the wizard is displayed.
       4.      Choose Install.

Unable to read software component versions from System Landscape

Dear all,
I have an ECC system with ABAP and Java installed.
I already configured so that SLDCheck, RFC destination configuration run successfully.
PIAPPLUSER is not locked and can logon.
However, when I import software component version in Integration Builder, the system return error message "Unable to read software component versions from System Landscape Directory "Server:50000".
Please tell me how to correct this error.
Giang

Hi,
Check this
http://****************/Tips/XI/SWComponentError/Resolve.htm
"Unable to read software component versions from System Landscape Directory
Unable to read software component versions from System Landscape Directory
unable to import from SLD
Regards
Seshagiri

Unable to install the updated version of iTunes

Hi All.
I am unable to install the updated version i.e. 10.7 iTunes. I have downloaded it and while installing process it moves until the last and rolls it back.
I have uninstalled itunes and tried again. Could not downloaded. Sowhow I have donloaded the version 10.1 which is no more compatible for my iPhone 4S with iOs 6.
I have read through many threads on the same topic but did not help. Please help here with any suitable idea.
Thanks,
Shan

"There is a probelem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your suppor personnel or package vendor."
Let's try the following user tip with that one:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

Unable to minimize or close version 3.6.3

Similar Messages

Maybe you are looking for