Unable to modify ANY C2S configurations

New BM3.8 server. Trying to set up VPM C2S services.
When I try to modify any DEFAULT or NEW Client to Site configurations, I get this error message when I click on OK. Unable to add any new traffic or authentication rules.
The Client To Site Service was modified partially. The Failed Items:
One or More Traffic Rules.

Truthfully, I tried many things and not sure what fixed it but I know I did follow the Console One steps in TID 10089619
I also make my VPN (BM) server that Master of the partition that this VPN(BM) server resided in. I really believe this solved the problem.
Bill
>>> On 11/12/2007 at 7:18 PM, in message <[email protected]>, Scott<[email protected]> wrote:
How did you fix this problem? I have the same problem but with the authentication rules.
Thanks
"Bill Swisher" <[email protected]> wrote in message news:[email protected]...
I got it fixed finally.
>>> On 10/29/2007 at 4:36 PM, in message <[email protected]>, Bill Swisher<[email protected]> wrote:
Narrowed the problem to seeing this on the console logger screen when I click on OK to save the C2S rule. Not sure what to try next.
Error:VpnConfig - RuleHandler:createNewRule method
com.novell.admin.common.exceptions.UniqueSPIExcept ion: (Error -604) An object class that does not exist in the Directory is being referenced by a utility.
I Ran NBMSCHCK.NLM from this server with no problems.
Found this TID # 10098678 that is my exact error, but can't figure what else to try to fix it.
TID says:
cause
The server was migrated from nw6 to nw65 and nbm 3.7 to nbm 3.8. During the migration, the server failed to communicate with the master of the partition, causing DS to be in an inconsistence state. This files above showed that server was missing some bordermanager classes, need them to add the value from imanager, causing the java exception.
fix
Once DS has been fixed and back to a stable state, re extend the bordermanager schema in one of this ways:
1. Using the new NBMSCHCK.NLM, included on the beta support pack bm38sp4 ( Bordermanager version 3.8.4)
2. Using console one and following TID 10089619
I Ran NBMSCHCK.NLM from on this server from the BM3.8SP5 directory with no problems.
I do remember during my BM install that said I didn't have privileges to extend the schema but the above check says everything is OK.
>>> On 10/18/2007 at 9:31 AM, in message <[email protected]>, Bill Swisher<[email protected]> wrote:
New BM3.8 server. Trying to set up VPM C2S services.
When I try to modify any DEFAULT or NEW Client to Site configurations, I get this error message when I click on OK. Unable to add any new traffic or authentication rules.
The Client To Site Service was modified partially. The Failed Items:
One or More Traffic Rules.

Similar Messages

Unable to modify any document through Cisco Edge WAE

Hi @ll
I'm having problems modifying documents (MS Office files) through my Cisco Edge WAE and I don't know if it's a problem in the cache or where the problem may be so I hope any of you have had this problem before to help me out finding a solution.
This is the scenario:
My Cisco Edge WAE is running the version 4.0.19.b14. For the moment I'm not using WCCP (to be implemented in the near future). The device is registered with the CM with Edge and print services enabled.I have the file server exported and pointing to my NAS server (apparently, all these steps have been well configured).
Lets say the NAS server is called NAS01 and I have the connectivity created call ESM exported to my NAS01 file server with the alias NASFS01 and the edge device assigned to this connection. All seems to be correct, in fact, if I type the Alias NASFS01, I can reach the server with no problem and create an excel document for example but when I try to open the same file and get it modified and I got the message that I don't have enough rights to do it, strange because if I have a look at the permissions of the folder (NAS01) I can see myself with full permissions.
I tried to get access and do the same in other WAAS out of my region, and it worked perfectly with the same access.
The only thing I saw was when I type #sh disk details:
The part in bold sounds starge to me...
disk00: Present    WD-WCANY3253596    (h00 c00 i00 l00 - Int DAS-SATA)
          238472MB(232.9GB)
disk01: Present    WD-WCANY4269388    (h00 c00 i01 l00 - Int DAS-SATA)
          238472MB(232.9GB)
Mounted file systems:
MOUNT POINT      TYPE       DEVICE                SIZE     INUSE      FREE USE%
/sw              internal   /dev/md0             991MB     621MB     370MB 62%
/swstore         internal   /dev/md1             991MB     285MB     706MB 28%
/state           internal   /dev/md2            5951MB     191MB    5760MB   3%
/local/local1    SYSFS      /dev/md5           11903MB     341MB   11562MB   2%
/disk00-04       CONTENT    /dev/md4          209177MB     466MB 208711MB   0%
.../local1/spool PRINTSPOOL /dev/md6             991MB      16MB     975MB   1%
Software RAID devices:
DEVICE NAME TYPE     STATUS                PHYSICAL DEVICES AND STATUS
/dev/md0     RAID-1   NORMAL OPERATION      disk00/00[GOOD] disk01/00[GOOD]
/dev/md1     RAID-1   NORMAL OPERATION      disk00/01[GOOD] disk01/01[GOOD]
/dev/md2     RAID-1   NORMAL OPERATION      disk00/02[GOOD] disk01/02[GOOD]
/dev/md3     RAID-1   NORMAL OPERATION      disk00/03[GOOD] disk01/03[GOOD]
/dev/md4     RAID-1   NORMAL OPERATION      disk00/04[GOOD] disk01/04[GOOD]
/dev/md5     RAID-1   NORMAL OPERATION      disk00/05[GOOD] disk01/05[GOOD]
/dev/md6     RAID-1   NORMAL OPERATION      disk00/06[GOOD] disk01/06[GOOD]
Anyone has any idea about why this could be happening?
Thanks a lot in advance for your help!!

Hi,
Reading below description, looks like your issue is discussed in below link.
http://www.cisco.com/en/US/ts/fn/633/fn63320.html
Please check and see if you have this behavior and upgrade the code. Thanks.
Ahsan

Unable to modify any documents from sharepoint

We are using Office 2007 and WSS3.0 whenever I try to open a document from sharepoint I get the following error as shown in the image.
Link to access the image:
http://imageshack.us/photo/my-images/148/officesharepointerror.jpg/
I can upload documents to sharepoint but cannot edit them.
I have repaired and reinstalled Office 2007 to no avail. I am not a Sharepoint admin so I cannot perform any administrative changes to the Sharepoint site. I have a contributor role to the Sharepoint site.
Can anyone help?

Hi,
Not exactly the same error we had here, but users were able to upload docs, but not edit. Re-ran the webfldrs.msi and it fixed the issue. If your error is affecting everyone, then this may not be your fix.
Unable to edit Documents in SharePoint
Error
User get s the following error message
“a problem occurred while connecting to the server” if the problem continues, contact your administrator
Solution
Well it worked today for Jo Mallett, when all the windows updates, profile rebuilds and office installs didn’t, and this fix took no more than about 1 minute to implement.
It is not uncommon for the web folders / WebDAV support in Windows XP to just stop working for no apparent reason.
You can usually reinstall the original Web Folders support by finding and executing
webfldrs.msi with specific options.
webfldrs.msi is probably in one of your system directories. It is easiest to search for it (remember to set advanced search options to include system and hidden folders). When you find the program (it’s a normal Microsoft install package) launch it, then
do these steps:
Click “Select Reinstall Mode”
Uncheck “Repair all detected reinstall problems”.
Check “Force all files to be reinstalled, regardless of checksum or version”.
Check “Verify that required user registry entries are present”.
Check “Verify that required machine registry entries are present”.
Check “Validate shortcuts”.
Press OK
Click REINSTALL
Normally no reboot is required.
Now the web folder client should have been restored as it was shipped.
If you previously installed Software Update for Web Folders (KB907306) from the Microsoft site, you may have to install it again.
Mike
Kind Regards Mike

SCCM 2012 - Unable to locate any configured SRS

I got this error while configuring the SCCM 2012 "Reporting Point"
Please advise what is the problem even I install the reporting service in SQL
Configuration Manager
Unable to locate any configured SRS instances on the server. Verify SRS is installed, accessible, and correctly configured.
Current Setup:
SCCM Server - SCCM 2012 SP1
Database Server - SQL Server 2008 10.0.5828.0

See here for troubleshooting tips:
http://www.windows-noob.com/forums/index.php?/topic/5486-cannot-install-reporting-point-role-sccm-doesnt-see-reporting-services/
Mike Crowley | MVP
My Blog --
Planet Technologies

HT202796 I can not copy, modify, any file from my Mac to external hard disk, of the seagate brand (fast HDD Portable Drive) I don´t know if I need some software to copy and modify files in my hard disk external ? Could you help me please?

Hello I have a iMac with 3.4 GHZ intel core I7, memory 16 GB 1333 MHZ DDR3, and OS X 10.9.4 Software.
I have problems when I try to copy or modify any file from my MAC to MY PORTABLE DRIVE/DISQUE (external hard disk).
my external hard disk have the next features:
brand: Seagate
4TB
I do not know if I need some software such as: paragon or I need to configure my MAC,
Please help me..
Thanks a lot

Click on it, choose Get Info from the File menu, and check the format.
If it's formatted as NTFS, reformat it as MS-DOS, exFAT, or Mac OS Extended (Journaled) as desired, or install software such as Paragon NTFS on the computer.
If it's formatted as FAT32 or exFAT, use the Disk Utility's Repair Disk command on it; this may also happen for a flash drive which is about to fail.
If it's formatted as Mac OS Extended, click Authenticate and provide your administrator password, or change the permissions on that specific folder in its Get Info window.
(110769)

Unable to find any active legal regulations for determination proc. "TEST1"

Hi Guys
This is in regards to a Customs document for a Payment doc
We have just finished the configuration of the Finance integration which will stop blocked partners during the Payment run
Now when we create a Proposal in the Payment run in ECC, the same document gets transferred to GTS, now even though the SPL is active when we check the Log there is a message Unable to find any active legal regulations for determination proc
Upon further investigation of the customs document i found 2 things
1) In the Geography section Country of Departure is populated with US, but the Country of destination is blank, this might be a reason as the Legal regulation checks both the countries and then activate, any idea how i can get the same to populate?
2) If the above population does happen, from which partner type should it come from, as in my customs document only Vendor and Bank is there, in the PO customs document this is being populated properly
Any idea what is wrong here?
Thanks
Carl

Hi Dave
Thanks for answering again.
I have tried activating it at country level, country/country, country/group, Same result in case of all
As i know now since the Country of Destination is missing, it cannot activate the last two, but the same is also not working at country level.
So is there anyway to maybe have some partner function which can populate the Destination country.
Any other advice will be really helpful..
Thanks
Carl

Unable to modify user password through OAM identity system console.

HI,
I am trying to reset the password of a user through OAM Identity console.
I had logged in through orcladmin(admin), and tried to update the password for users, as well as orcladmin also.
After clicking save, its giving me error "Modify User Entry Failed" and password is not updated in LDAP
Also note that I am able to modify any other attribute of that user like last name, title, firstname etc through identity console.
Its only user password attribute which is not geting updated.
I am user OVD, which is integrated with OID & AD for user store.
Also I tried to set "Access Attribute control" for modifying user password, but that didnt help.
Kinldy suggest if you have came across this kind of issue.
Regards,
Ankit.

HI,
Thanks for the replies.
As my OVD is integrated with OID & AD both, I am picking up the users from OID for update.
Also the SSL is configured betveen OVD & AD, but still AD user password is also not successfull.
Niether of two is working.
I am not able to create a user through Identity System console, as I had not configured workfllow.
I believe for updating user attibute, workflow defination need not to be define.
Also As I had mentioned before, I am able to modify all the other attributes other than user password.
Also Schema is extended properly.
Thanks & Regards,
Ankit

CR for Enterprise 4.0: Unable to retrieve the datasource configuration

Hello Experts, I have the following issue with CR for Enterprise: I can successfully connect to our BI server, but when I select a universe I would like to build a report on, I receive the following error message about the validity of my data source: "Unable to retrieve the datasource configuration: com.crystaldecisions.thirdparty.org.omg.CORBA.UNKNOWN minor code: 0x0 completed: No". The universe I am trying to connect to is based on a relational connection and was built using the IDT 4.0 SP 1.
Thanks a lot for any guidance on how this could be resolved.
Sergey

Hi Surgey,
Well that is very strange! Is Crystal Reports for Enterprise installed on the server machine or on the local workstation?
If we are using Crystal Reports for Enterprise which is installed on a sperate workstation, try installing it on the server machine and then try to connect to universe.
- Kuldeep G

I am unable to modify template properties

Hello,
I have noticed that I am unable to modify properties of my template. The "Template Properties" menu is disabled.
I made a basic html page and saved as template, by thinking that my template is not proper.
But nothing change
What migth be reason for this strange situation in CS5 and the any solution?
Thanks

Of course I have editable regions.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>

head
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Untitled Document</title>
</head>
<body>
EditRegion1
OptionalRegion1
</body>
</html>
I am trying to change OptionalRegion1 property to enable/disable

On Windows XP: AirPort Utility was unable to find any base stations

hi, I've been using AirPort Extreme for at least a year to connect both my eMac and my Lenovo Thinkpad which uses Windows XP. yesterday my Thinkpad was infected with a virus and I went through a lengthy remote session with Norton Antivirus tech people to get rid of it today. Sometime in the middle of the session the Thinkpad stopped being able to connect to the AE wireless network. I got back on the internet by plugging the Thinkpad directly into the router.
Now on the AE utility it says "unable to find any base stations." so far I tried uninstalling and reinstalling the AE utility and unplugging and restarting the AE base station. On my eMac everything seems to be fine.
Please help!

Thanks for your instructions. Basically the same results happened. Is there something else I should be doing on the PC notebook end to connect? The AirPort Utility on my PC still doesn't see any base stations. So using the Access Connections setup the only way I could see to connect with a password was what I described in the previous post. Access Connections sees my network, but fails to connect to it.
Just to be clear, there hasn't been any problem with my notebook seeing the network. For a long time until recently it was seen by the AirPort Utility on the PC. When Access Connections fails to connect it asks if I want to configure the network and there's a bunch of settings. Connection type: infrastructure or Adhoc, Wireless security type "use static WEP keys", "Use Wi-Fi protected Access - Pre Shared Key (WPA-PSK)" - that seems to be the right one, so I choose it and under Properties there's more options. Access point authentication, WPA-PSK or WPA2-PSK; I've tried it both ways. Data encryption: TKIP or AES, I've been using TKIP. Under Pre-Shared Key, there's the only box I see to enter a password (see previous post).

HT3728 AIRPORT UTILITY IS UNABLE TO FIND ANY WIRELESS DEVICE 5.6.1

Ok So I have bought a 2TB Time Capsule, for the past few weeks we have been doing our backups on it etc and just using our already installed Netgear wireless router. Tonight I decided I would "extend an already existing wireless router" - after following all the steps etc and then clicking apply etc, the Airport Utility said that it would need to restart the time capsule etc. After about 5 mins and it looked like it had frozen, airport utility re-started and now all i get is:
"Airport Utility is Unable to find any wireless device. Make Sure the Airport Wireless Device you want to set up is plugged in and in range of your computer, and then click rescan"
I have clicked Rescan like 10 times
I have quit and restarted Airport Utility as well as my Mac OSX 10.5.8
I have pulled the Time Capsule plug out of it and restarted it
I have turned of my airport on my computer and turned it back on again
I have read a number of posts - yet nothing seems to give me any more options other than to rescan.

If you are trying to connect the Time Capsule to the Netgear router using a wireless only connection, Apple's "extend a wireless network" feature was designed to only work with other Apple routers. It is extremely unlikely that this setting would work with a Netgear product.
You will need to start over again and perform a Factor Default Reset on the Time Capsule and then re-configure it back to the original settings that you set up previously.
Resetting an AirPort Base Station or Time Capsule FAQ

Unable to find any planning application in Calculation Manager

Hi All,
I had configured Calculation Manager in hyperion 11.1.2. I logged into Workspace and I select the calulation manager *[workspace->navigator->administer->calculation manager].* Through these selections I got System View wizard, in that when I tried to expand the Planning under the Name tab, I am unable to find any planning application.
Note: I have already created two planning applications.
Kindly guide me how to overcome it.
Thanks and Regards
ChiDam

Did you create the planning applications with the option to use Calculation Manager or Business Rules?
Cheers
John
http://john-goodwin.blogspot.com/

I need to add bpm to my songs but in some of them i just can't add/modify any info. it seems like it happens only with the verified songs (the ones i download from souncloud work for example) probably verified trough gracenote..is there anything i can do?

i need to add bpm to my songs but in some of them i just can't add/modify any info. it seems like it happens only with the verified songs (the ones i download from souncloud work for example) probably verified trough gracenote..is there anything i can do?
this is what happens when i try to add/modify the infos and it doesn't work, i'm even unable to click in the spaces
thanks for your attention,sorry for the bad english

Right-click on your main iTunes folder and click Properties, then go to the Security tab and click Advanced. If necessary grant your account and system full control to this folder, subfolders and files, then tick the option to replace permissions on child objects which will repair permissions throughout the library. This is the XP dialog but Windows 7 shouldn't be too different.
tt2

Unable to open any website due to The proxy server is refusing connections, why?

Firefox is opened, but unable to open any website. The message says, "The proxy server is refusing connections" & "Firefox is configured to use a proxy server that is refusing connections". I installed the version 8.0.1 again. But there was the same message, again!

Check the connection settings.
*Tools > Options > Advanced : Network : Connection > Settings
*https://support.mozilla.com/kb/Options+window+-+Advanced+panel
If you do not need to use a proxy to connect to internet then select "No Proxy" if the default "Use the system proxy settings" setting doesn't work.
See "Firefox connection settings":
*https://support.mozilla.com/kb/Firefox+cannot+load+websites+but+other+programs+can

Error when access instrument "Primary Error: (Hex 0xBFFA003D) Unable to find any channel or repeated capability strings"

Hi All,
I believe I have configured MAX correctly. I am trying to use the PXI-6229 device via. When I try initialized I receive the following error:
Primary Error: (Hex 0xBFFA003D) Unable to find any channel or repeated capability strings.
Any clues on what the error means?
Thanks
Minesh
Solved!
Go to Solution.

First of all you'll get more help in the correct forum. This seems like a DAQmx issue and their forum is here: http://forums.ni.com/t5/Multifunction-DAQ/bd-p/250
Secondly does this help: http://forums.ni.com/t5/Switch-Hardware-and-Software/NI-SwitchExec-with-3499-and-IVIDriver/td-p/1827...
Lastly: Can you communicate with the card from MAX? Or is the error happening in MAX? What language are you using to talk to the card with? Are you using IVI? If you are using LabVIEW or CVI then open the shipping examples and test them out with that card.
Regards,
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~

Unable to modify ANY C2S configurations

Similar Messages

Maybe you are looking for