Unable to Modify Resource Notes and Roles Responsibility in 8.2

hi there
I am unable Unable to Mopendify Resource Notes and Roles Responsibility in 8.2. Whenever i click modify it just open new window with some option of font and other on top ribbon but in the main pane i am not able to write down any thing
any suggestion

Did you go to the Resources page itself?
Try going to resources page from Enterprise-Resources and then select the resource then Modify, subsequently in the window opened you should be able to enter the text. It should work it because am also using V8.2 itself.

Similar Messages

  • Recently downloaded latest version of iTunes software, afterwards, while trying to sync iphone with PC received this error message: Unable to Load Resource not found; SyncUICoreLocalized.dll; please advise, thank you

    Recently upgraded PC with latest edition of iTunes (1/30/2014), afterwards, received this error message while attempting to sync iphone with PC: Unable to load, resource not found, SyncUICoreLocalized.dll

    THIS HAS EVERY APPEARANCE OF A SOFTWARE GLITCH BY APPLE ... So first suggestion is NOT to begin reinstalling various software but to await some answer & fix from Apple.  Too many have same problem on various systems, in my view (I am not an Apple rep but have certainly faced many glitches over the years).
    PS - LOTS of Apple software problems these days, including many people having their Contacts shredded.  What's going on with Apple?

  • Oracle APIs For Contacts and Role Responsibility

    Hello,
    Please, I need a direction on how to proceed about the use of the right API. I'm working with Oracle EBS R12. If this is not the place for this kind of doubt, please let me know the best one.
    I already have a site for a customer, which was created by the ra_customers_interface_all, after loading the data and processing the interface.
    Now I need to create (using Oracle APIs) a contact name, which will have at least a telephone number and an e-mail address.
    I know that the contact name will be in table HZ_PARTIES, but later it will be related to a site. The registry that will be used for this has the Party_Type value equals to 'PARTY_RELATIONSHIP', according to what the customers interface did after being executed.
    Then the telephone number and e-mail address will be in table HZ_CONTACT_POINTS. The Owner_Table_Name of it has to be 'HZ_PARTIES'. The Owner_Table_Id of it will have the value of Party_Id from table HZ_PARTIES, which has Party_Type value equals to 'PARTY_RELATIONSHIP'.
    After this, my main goal is to create a role responsibility to the contact name. So I know there are other two tables involved. They are HZ_CUST_ACCOUNT_ROLES and HZ_ROLE_RESPONSIBILITY.
    And I see there are two more tables involved, which are HZ_RELATIONSHIPS, which will do the PERSON x ORGANIZATION relation, and also table HZ_ORG_CONTACTS, which has the field PARTY_SITE_ID, to finally indicate that this contact is part of a site, which I already have.
    I have all these tables in mind. I just need a tip on how to proceed. I'm able to create a party as PERSON, not yet as PARTY_RELATIONSHIP. I'm able to create a contact point (telephone number). I'm lacking the idea about what to do have this:
    site -> contact name -> telephone number of this contact name inside this site
    I can do this:
    site -> telephone number of this site
    Any help would be great.

    Thanks for the reply but i stil have the problem...............
    My Current machine.config has this to say in that particular section
    <connectionStrings>
    <add name="LocalSqlServer" connectionString="data source=.\SQLEXPRESS;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|aspnetdb.mdf;User Instance=true" providerName="System.Data.SqlClient"/>
    <add name="OraAspNetConString" providerName="Oracle.DataAccess.Client" connectionString=" "/>
    </connectionStrings>
    What can be done.........................in this case
    Thanks

  • Unable to Update Resource Addresses and Subinventories

    Some of our users don't have access to update access to the Resource Addresses and Subinventories form in Field Service. They get the error below as soon as they hit save:
    You do not have the security privileges necessary to update this particular record. If you require more information, please contact your local operations support group (ENTITY_NAME=Party Addresses)
    It doesn't seem to be responsibility related as some users logging in with the same responsibility are able to.
    What drives the security behind this form ?

    Sorry for responding late:
    Just check whether person is attached to that user id or not.
    -Shahid

  • Why am I unable to email my notes and photos from my iPad?

    I want to email a note from the Notepad app and email photos but they are not going through to the receiver.  The app makes the sound indicating the note or photo was sent but nothing is happening.

    I finally took my iPad in to my local Mac store, and at first they were just as perplexed by the problem as I was.
    Then one of the very helpful tech ladies in the store figured out that I only needed to reset the iPad when the Notes app was open, and that fixed the problem.  Have you tried doing that?

  • Error Message: Resource Not Found, Unable to Load SyncUICoreLocalized.dll

    I'm having trouble syncing my iPhone 4. I get an error message that says: Resource Not Found, Unable to load SyncUICoreLocalized.dll.  This is preventing me from transferring my information from my old phone to my new iPhone 5c.  Can anyone help me??? A simple restart of the computer did not solve the problem.
    Thanks :-)

    I found a thread of people having the same problem, and a suggestion by stanalet solved my problem! Thanks stanalet!

  • No icons on google toolbar. I just get a blank toolbar with nothing on it. unable to modify/reset. reinstall did not volve the issue.

    no icons on google toolbar. I just get a blank toolbar with nothing on it. unable to modify/reset. reinstall did not volve the issue.
    Cannot click on gmail icon, google maps icon, ect... there is just a blank bar and you can do nothing.

    Do you have the latest version of the Google Toolbar?
    '''7.1.20110512W''' is the latest, as far as I know.

  • Export to MS Project and multiple resources to one role

    Ok, after this rather cryptic title i will explain my problem:
    We are currently in a project where we have the following requirement:
    A download of cProjects needs to be imported into MS Project 2007.
    When a project role is staffed with multiple resources in cProjects it is imported into MS Project as a single role with only the first resource attached to it. All the other resources are nowhere to be found.
    Does anyone have a solution to this?
    Edited by: Miel Claessens on Jul 16, 2010 12:57 PM
    Edited by: Miel Claessens on Jul 16, 2010 12:58 PM

    Hello Meil,
    You can try to implement your requirement in BAdI DPR_MSP_CUST_FIELDS method CUST_CONVERT_DPR2MSPINT. Here you have to convert each and every Resource assigned to a Role as individual resource in MS Project. You have to use method CUST_CONVERT_MSPINT2DPR to convert it back in Project's format.
    e.g. 1) Downloading Project to MSP --> Role 1 has Resource 1 and Resource 2 then in first method you need to Create entry for Resource 1 and Resource 2 and keep track of to which role these are staffed. But this will create individual entries for each resource and will not add the resources name to Project role. Other possible implementation would be that you can maintain the Employee number of each Resource in some Text field which is not used in Field Mapping and accordingly decode these Emplyee numbers while uploading the Project from Ms project.
    2) Uploading Project from MSP --> Use second method CUST_CONVERT_MSPINT2DPR to decode the above implementation to fill the Project structure for Role and Resources.
    You may check it if it is possible to implement it in that way.
    As a standard, as metioned earlier, it is not possible.
    Thanks and Regards,
    Piyusha

  • Critical Action and Role/Profile Analysis job in not running in GRC 5.3

    Hi Team,
    I  am working for a client where GRC 5.3 is installed( support pack 4 and patch 1).
    The installation is complete and also the post processing is done.
    We have scheduled a periodic ( weekly ) incremental background job for Critical Action and Role/Profile.
    Following are the parameter setting used:
    Task: Risk Analysis -Batch
    Batch Mode : Incremental
    First time it run successfully on 28th June'09 and it is completed with spool also. But next time it is supposed to run on 4th of July'09 . But it does not. And since then it is in same state.
    I am not able to find any reason that why it is behaving this way where other incremental jobs are running successfully.
    It will be helpfull if any one can guide me providing the solution.
    Regards,
    Kakali

    Hi Varun,
    I go to the Job History Button. It shows the following data only :
    2009-06-28 00:00:59 Done Job Completed successfully
    2009-06-27 23:45:00 Started RAR_PE1CLNT100_Critical Action and Role/Profile Analysis started :threadid: 0
    Under the Last Run Colomn it shows 28th June ( Status -completed)
    Under Next Run Date it is showing 4th July
    Follwoing are the list of Updates available From SP05
    When executing the critical roles/profile jobs in background, a message
    "error while executing the Job: null" comes up. ---( this one is for which come under Informer Tab)
    Background job spools are not available after upgrade from 5.2 to 5.3.
    Critical action and critical role/profile analysis cannot be run in
    background by system. --- ( But in my case It ran for once )
    Selection parameters (System, User and User Group) have been provided for
    "Critical Action and Role/Profile Analysis" in Configuration->Background
    Job->Schedule Job. --- ( it means it run usually)
    Critical Actions report in detail view shows no results after executing the
    Risk Analysis Job in the background. The same report shows data when
    executed in the foreground. ( this one is for which come under Informer Tab )
    When there is only one periodic job configured in RAR, this job fails to
    start after the first time in the specified time. ( this is not true, becoz there other periodic jobs running successfuly)
    Unable to run Informer - audit reports - critical role and profiles with
    logical systems. ( this is again under Informer Tab )
    I had gone through this  earlier also, but not able to match any update with my problem. If if have any other suggestion you can provide me the same.
    Is there any way to check for job log so that I can check what is the problem. View Log option is also greyed out as we have sap logger set up as a default logger Parameter. I have made it enable just to check but there is nothing.
    Please Guide.
    Regards,
    Kakali

  • Error message "iTunes Helper Resources not available" and saving to wrong Drive

    I am trying to upgrade iTunes to 10.7 on my PC but I keep getting the error message "iTunes Helper Resources not available". Diagnostics take me a support page which talks about not being able to see the device in iTunes - but I can see the device without problems.
    I thought I would try reinstalling iTunes from the webpage and it downloaded to my PC fine but when I went to setup, it showed me it is saving to a DVD drive - not my Hard drive. It also won't let me change the location for the file. I have no idea how that's happened as I obviously don't use the DVD drive as a USB (although the PC see's it as one) and I've never chosen it as the location for iTunes in the 7-8 years that I've been using it.
    I then thought I'd try uninstalling it and reinstalling it (to the correct drive) but again, it comes up that the DVD drive is invalid and won't uninstall iTunes.
    So I'm stuck and haven't been able to find anything helpful on the support pages or in iTunes Help.
    Please someone help ...
    Thanks.

    Try the following user tip. (Probably, the section on clearing the installation database might be best given that you've currently got a drive on the problematic letter at the moment.)
    "Invalid drive X:\" install errors

  • Labview: resource not found ; Specifically a VI located in my LV 8.2 Project I am trying to download to my FP-2000 and run.

    Hi, 
    I am fairly new to the LV Project method of building executable files and embeded applications. 
    I have been using LV 7.2 for the last few years and finally switched over to 8.2 this last summer.
    My problem is that I have an embedded application that I need to troubleshoot, but every time I try and run it from my desktop, it hits me with one of these messages:
    Deploying MPPT-Testbed  (successfully deployed target settings)
    Deploying ErrorConvert.vi  (already deployed)
    Deploying FP Close(IO).vi
    Failed to download FP Close(IO).vi
    LabVIEW:  Resource not found.
    LabVIEW:  Resource not found.
    The FP Close(IO).vi is the latest issue, I have had other files that have failed to load as well.  I have attempted to make a common folder for all of my shared VIs, I have 6 FP-2000 controllers. 
    Any ideas? 
    I run LV 8.2 w/RT on my desktop, my FP-2000 is running LV 8.2, FP Drivers 5.2.0 and FP VI Manager 4.1.0
    -Bill

    Hi Bill,
    Since you produced code in a previous version of LabVIEW, and therefore previous FieldPoint driver version, you will need to revamp your code a little to be able to use it in LV 8.2 with FieldPoint 5.0. I'm assuming that the FP Close.vi is not available in the palette that is not available in LabVIEW 8.2. This is expected, as FieldPoint 5.0 utilizes different VIs than previous versions. Accordingly, you do not need to use the FP Open or FP Close VIs, as they are not available in this driver version. However, you only need to use a Browse I/O Point and either a FP Read, FP Write or FP Read/Write. Generally, a quick modification of your code will take care of this problem. Let us know if you need help with this; a screenshot of your code might be helpful. Thanks!
    Amanda Howard
    Americas Services and Support Recruiting Manager
    National Instruments

  • I have just recently installed ios6 to my iPad 3 an iPhone 4 my iPhone works fine but my iPad is not working at all I can not get a response from it, it seemed to download an then install but did not reset and turn on and will not turn on HELP!! Withdrawa

    I have just recently installed ios6 to my iPad 3 an iPhone 4 my iPhone works fine but my iPad is not working at all I can not get a response from it, it seemed to download an then install but did not reset and turn on and will not turn on HELP!! Withdrawal or what!! Lol

    Hi there,
    Firstly, try a hard reset. Hold the sleep/wake and home buttons together until the Apple logo appears.
    If this doesn't work, try restoring your device. Put it in recovery mode if iTunes doesn't recognise it, and restore it from there. I have linked to instructions below.
    Recovery Mode and Restore - Apple
    Let me know if this helps,
    Nathan

  • I have a CD which refuses to eject - no icon appeared for it, tried to eject and no response at all - can't even hear it trying, not showing on iTunes and any attempt to eject thro iTunes or any other programme seizes everything up

    Sorting out my CDs.  Put one in and no response - no icons appeared on desktop, nothing showing on iTunes.  Tried to eject and absolutely no response - can't even hear any attempt to eject.  I've tried a few different things and no response or the programme I'm using jams up.  Not a huge computer buff so I need things explained really simply - only had my Macbook Pro for a year and still not completely tuned into Apple system - would have know what to do on my old Windows!

    You can use a key combination to force removable media to eject at startup. Visit Startup key combinations for Mac - Apple Support and try the options listed in the bottom row.

  • I am using UPK developer 12.1.0 single user. My sofware has crashed and needs reinstallation. Please suggest how can I take back up of my source files. I am unable to open the application and i can not locate the library backup folder on my local machine.

    I am using UPK developer 12.1.0 single user. My sofware has crashed and needs reinstallation. Please suggest how can I take back up of my source files. I am unable to open the application and i can not locate the library backup folder on my local machine.
    Also, does reinstallation takes the back up automatically or the files will be lost. Please help.

    Here are a bunch of scripts to get folder size under all circumstances.  Take your pick.
    https://gallery.technet.microsoft.com/scriptcenter/site/search?query=get%20folder%20size&f%5B0%5D.Value=get%20folder%20size&f%5B0%5D.Type=SearchText&ac=2
    ¯\_(ツ)_/¯

  • I have 3 songs waiting to download for 3 days. I am unable to swipe to delete and I have rebulit my itunes libary which did not remove the songs from my phone. What do I need to do to get rid of these songs?

    I have 3 songs waiting to download for 3 days. I am unable to swipe to delete and I have rebulit my itunes libary which did not remove the songs from my phone. What do I need to do to get rid of these songs?

    Hi RadarCat16,
    Welcome to the Apple Support Communities!
    I know it can be frustrating when you are waiting for content to download to your iPhone from the iTunes Store. There are a few steps I would recommend in this situation. Please read over and follow the steps in the attached article.
    iTunes: How to resume interrupted iTunes Store downloads
    http://support.apple.com/kb/HT1725
    If your download was interrupted using your iPhone, iPad, or iPod touch
    From the Home screen, tap the iTunes app.
    For iPhone or iPod touch, tap More > Downloads. For iPad, tap Downloads.
    Enter your account name and password if prompted.
    Tap the blue download arrow to resume.
    If you can't complete the download on your iOS device, you can download it in iTunes on your Mac or PC and then sync it to your iOS device. You can also transfer purchases from your iPhone, iPad, or iPod to a computer.
    Have a great day,
    Joe

Maybe you are looking for