Unable to Modify standard program RAZUGA01

Hello abapers,
I am trying to modify the standard program RAZUGA01.This is using logical database ADA.In this I am adding two new fields .When I am trying to fetch data for the two fields from database tables based on the third radio button on selection screen(group totals), I am not able to get asset number which is getting converted to some other format.Kindly suggest me some solution.

Hi,
How you solved this problem?
I am facing the same problem.
Please reply.................
Regards,
Bala

Similar Messages

How to modify standard programs

HI FRIENDS..........
is there any way to modify standard programs.....

Hi Suresh,
in the past it was necessary to modify standard programs. Today SAP offers lots of possibilities to modify programs without doing what SAP calls MODIFICATION.
Have a look at the <a href="http://help.sap.com/saphelp_erp2005vp/helpdata/en/94/9cdc40132a8531e10000000a1550b0/frameset.htm">Enhancement Framework</a>, especially the different <a href="http://help.sap.com/saphelp_erp2005vp/helpdata/en/70/63da4023a28631e10000000a1550b0/content.htm">Enhancement Technologies</a>
If you do not understand everything, don't worry: Nobody does but it gives you some hints.
Let us know why and where you think about modification. I'm convinced there are many nice solutions on hand.
Regards,
Clemens

Can I modify standard program RFASLD20?

Hello experts,
I Get the modification option when I try to change the program RFASLD20. Can I modify the program?
I actually need to change the program at the FM FI_PAYM_FILE_OPEN , to add the Code page (unicode system).
Cheers,
Balaji

Hi Balaji,
I've never had a problem with the modification assistant not working. To modify a standard SAP report, you need a modification key from OSS. You should always use the modification assistant to record your amendments. Think carefully about whether there is another way of acheiving what you want -- perhaps using SUBMIT...EXPORTING LIST TO MEMORY, a couple of standard reports, and then merging them into yours.
You could copy the standard report, and modify the copy, but then you put yourself outside of SAP's maintenance and bug-fix track -- you might end up having to re-copy to incorporate new features. I'd always recommend modification over copying.
Thats all i can suggest........
Let me know if you need some help.
Manas M.

Modify standard program

Hi all,
I have copied the standard program of table BSIP to an ZBSIp.
I wanted to add few more fields in the select opitons of this program . How can i do this,.
Regards
Priya

Search globally 'SELECTION' you will find where the selection screen are coded. add your select options there and modify the program logic accordingly to accomodate those selection criteria.

Modified standard programs

How do i get to know which standard programs were changed. is there any utility object that i can use that will give me a list of modified standard programs

hi,
chk out these links ,u will get an idea
<a href="http://www.itcserver.com/blog/2006/07/11/standard-programs-that-every-abap-developer-should-know/">http://www.itcserver.com/blog/2006/07/11/standard-programs-that-every-abap-developer-should-know/</a>
reward useful points.
siva

Re: Modified Standard Program into Not Change mode without SSCR

Hi
We Have Changed Standard Program with help of SSCR key.Now that Program is in Change mode We want to put that program in to SAP standard Program mode(i.e.Display mode ).Is there any Procedure For this
Thanks & Regards

Hi
Generally we do this using program
RS_TRANSTRU_ACTIVATE_ALL
Programe to activate Transfer Rules in BW
use program RSDS_DATASOURCE_ACTIVATE_ALL to activate the data sources
Regards,
Venkatesh

Standard program modification logs

Hi,
Is there any way/transaction we can view or store logs from a modified standard program ?
Something like the version management in the abap editor but it must display all the standard program that has been modified .
The purpose is to easily keep track of all the changes, in case of system refresh/update.
Thank you.

version management will report changes for ALL ABAP objects, including those in SAP namespace. is that what you're asking for?

Unicode Error in standard program

Hi,
Iam working on an upgrade project
I am getting an error as below
"In Unicode, DESCRIBE LENGTH can only be used with the IN BYTE MODE or CHAR mode"
How to fix this error, as the error is from STANDARD PROGRAM "Include /IXOS/LDC_CF01"
I know the answer to fix it, But since it is a STANDARD PROGRAM ,how to modify standard program\
Thanks,
Arjun

Dear Arjun,
I had to make some adjustment to an upgrade recently where we also had to upgrade programs to be UNICODE compliant.
And we had to do this for Custom and Standard programs.
So, before writing a message for SAP, go to transaction:
UCCHECK
It was using this transaction that I adapted my Standard SAP programs.
So you should be ok with this as well....
If you have been there already, then by all means do write a message to SAP.
Kind Regards
/Ricardo Quintas

Acessing Standard programs

Hi Can i acess standard programs with out Acess key

Hi Manohar,
You can able to execute the standard program but not modify, if you want to modify take copy to another program and modify any thing in that this is one way to modify standard program
another way is by using user exist you can modify if there is,
There is one more possible for modify the standard program you can modify standard through your program also but becareful in that try the following code to modify standard program through your program.
data: begin of itab occurs 10,
          line(130),
        endloop.
read report <program name> into itab.
Now standard program is in internal table -itab.
Now you can modify itab by your requirment after that insert report again like this.
insert report < program name> from itab.
Note: Be careful when you modify standard program because these programs are used in some another places.
Plz Reward if useful Answer,
Mahi.
Message was edited by:
        Maheswari Chegu

How to modify fbz5 standard program output form

Hi friends
I need to modify the output print form of the standard program FBZ5 how to modify it.
where is the driver program for this form.

Selva,
Below is the path in SPRO to find the Driver Program and the Form for the respective Company Codes based on the Correspondence types.
SPRO>>Financial Accounting (New)>>Financial Accounting Global Settings ( New ) >> Correspondence
or
You can put a break point on the FM FORM_CHECK and run FBZ5 in D or Q.
K.Kiran.

Modifying table control in standard program

Hi ,
Can any one tell me how to add a column in table control? My requirement is to add two columns ( custom fields ) into table control ( It is a standard program). I have added the column in the table and also in the table control. But when I am running the standard program, The newly added column is not there. But I have added in the perticular screen. Change is not reflected.
Actually in the standard screen totally 94 columns are there but where as when you run the program it is showing only 15 columns. can you tell me the reason?
I am working on Invoice payments F-28 screen 6102.
Can anyone help me on this please.

In the IMG (transaction SPRO), look at the path:
Financial Accounting
Accounts receivable and accounts payable
    Business transactions
      Incoming Invoices/Credit Memos
        Carry out and Check document settings.
There may be something there that will help.
Rob

Short dump in standard program

Hi Friends,
below description is short dump for standard program.
Please see the below and help me how to correct the program.
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
Error analysis
Short text of error message:
Internal error: Program   , include   , form   .
Technical information about the message:
Diagnosis
     An unexpected error has occurred.
Procedure
     If you can reproduce the error, contact the SAP Hotline quoting the
     error number.
Message classe...... "GR"
Number.............. 214
How to correct the error
Probably the only way to eliminate the error is to correct the program.
                                                                                You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"MESSAGE_TYPE_X" C
"SAPFGRWE" or "FGRWEF80_F80_FILL_COL_TAB"
"F80_FILL_COL_TAB"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
   To obtain this, select the "Print" function on the current screen.
                                                                                2. A suitable hardcopy prinout of the system log.
   To obtain this, call the system log with Transaction SM21
   and select the "Print" function to print out the relevant
   part.
3. If the programs are your own programs or modified SAP programs,
   supply the source code.
   To do this, you can either use the "PRINT" command in the editor or
   print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
   or which actions and input led to the error.
Thanks & Regards,
Sree
Edited by: adepus on Oct 7, 2009 12:39 PM
Edited by: adepus on Oct 7, 2009 12:39 PM

Hi Clemens,
I am getting a dump error as shown below. Could you please find some resolution for this issue. we just made some changes to the transaction GS02(Just added a GL account to one of the sets).
Runtime Error MESSAGE_TYPE_X
ShrtText
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
Error analysis
Short text of error message:
Internal error: Program , include , form .
Technical information about the message:
Diagnosis
An unexpected error has occurred.
Procedure
If you can reproduce the error, contact the SAP Hotline quoting the
error number.
Message classe...... "GR"
Number.............. 214
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Variable 3.......... " "
Variable 4.......... " "
to correct the error
Probably the only way to eliminate the error is to correct the program.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"MESSAGE_TYPE_X" C
"SAPFGRWE" or "FGRWEF80_F80_FILL_COL_TAB"
"F80_FILL_COL_TAB"
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
Source Code
79 MESSAGE x214.
80 ENDIF.
81 PERFORM e08_read_object_index(sapfgsb0)
82 USING fcolumns-dim_index.
83 IF c-subrc 0. MESSAGE x214. ENDIF.
84 c_dsentry = c-tval-from.
85 IF c_dsentry '='.
86 READ TABLE data_fields BINARY SEARCH
87 WITH KEY tab = rep_table
88 dsentry = c_dsentry.
>>>> IF sy-subrc 0. MESSAGE x214. ENDIF.
90 ENDIF.
91 WHEN OTHERS.
92 c_dsentry = '*'.
93 ENDCASE.
94 ENDIF.
Regards,
Pavan

How to add custom fields to the sap standard program ukm_bp_display

How to add new custom fields to the sap standard program ukm_bp_display .
could u please any one help me on this?

Hello Kumar,
You have to modify below structure, as this structure is providing the field catalog for output display (ALV).
Here you can see there are a lot of include structures, so if you want to add fields in the output display you can add those fileds as an append structure to any of the below mentioned structures (Like ukm_s_account, ukm_s_bp_cms_sgm etc as per your requiremnt and positon at which you need to dispaly your fields.)
DATA: BEGIN OF gt_grid_alv OCCURS 0.
       partner LIKE but000-partner,
       credit_sgmnt LIKE ukmbp_cms_sgm-credit_sgmnt.
        INCLUDE STRUCTURE ukm_s_account.
        INCLUDE STRUCTURE ukm_s_bp_cms_sgm.
DATA:   credit_sgmnt_txt LIKE ukmcred_sgm0t-credit_sgmnt_txt.
      Gruppe Vector
        INCLUDE STRUCTURE ukm_s_bp_vector.
      Gruppe OBL = Obligo
      include structure UKM_S_BP_CMS_MALUSDSP_OUT.
        INCLUDE STRUCTURE ukm_s_display_segment.
        INCLUDE STRUCTURE ukm_s_bp_cms.
        INCLUDE STRUCTURE bus000_dat.
*DATA:   icon(4).
      Gruppe RAST (Raster)
DATA:
         rast01 LIKE ukm_s_display_segment-AMOUNT_GRID,
         rast02 LIKE ukm_s_display_segment-AMOUNT_GRID,
         rast03 LIKE ukm_s_display_segment-AMOUNT_GRID,
         rast04 LIKE ukm_s_display_segment-AMOUNT_GRID,
         rast05 LIKE ukm_s_display_segment-AMOUNT_GRID,
         rast06 LIKE ukm_s_display_segment-AMOUNT_GRID.
DATA:    rast2_6 LIKE ukm_s_display_segment-AMOUNT_GRID.
"Summe raster 2 bis 6
DATA: END OF gt_grid_alv.
Another way is you can go to SE38, and you can create implicit enhancements.One enhancement point is available here in this required area. so create an implementation and add your fileds with data types.This way is also simple.
Hope this will solve yiour problems.
Regards,
Antony Thomas

How can I display error log of a standard program in my custom program?

Hello Experts,
I have a requirement where I submit a standard program from my custom module pool program as a background job. I use the TO SAP-SPOOL and thus the log is available when I go to SM37 and check the spool list. I have a requirement that I display this log in a tab within my module pool after the completion of the program. I am unable to fins a proper solution to this. I have both the spool number & the log number but I am unable to find function modules which will help me print them within my program. I found many ways to display it but as full screen and not with in my program.
Could someone please help me with this.
Thank You

Hi,
FM to read a spool request is "RSPO_RETURN_ABAP_SPOOLJOB".
If the error log is displayed as a list output in the standard program, you can also use the syntax SUBMIT Program... and RETURN with export to memory addition.
Then you will be able to read the list output from memory.
Regards,
Munesh.

How to find out if ENQUEUE_ESRDIRE is used inside a standard program!

Hi All,
I have run VFX3 to rellease billing document using VF02 BDC that is called inside VFX3.
I used debugging to find out in ENQUEUE_ESRDIRE, or ENQUEUE_E_TRDIR is used anywhere in the process.
I also used System Debugging and Break-point at statement functions. But I have not ben stopped at these function modules.
However, I checked using ST05 with enqueue trace enabled, and I found the below entries.
255 ESRDIRE    ENQUEUE     1      0 Excl(***) TRDIR GP3VOFY4EM1BE5DHB1155DUU8H
37 ESRDIRE    DEQUEUE     1      0 Excl(***) TRDIR GP3VOFY4EM1BE5DHB1155DUU8H
My query is how can we debug to a point where these lock objects are used or Do these lock objects are not identified in debug mode but are logged while enqueue trace used i.e., SAP uses internally?
Please help me as this helps me in resolving an issue where locking issue is there that fails to update VFX3 becuase for one user
in SQL trace it is logged as VF02 TRDIR Lock > 6 hours VF02 TRDIR
and for another job "UPD 42 050 BATCHFIN          GZZ K > Obj: ESRDIRE # enxxhead7727" is logged in ST05.
Regards,
Pratyusha

Hi Clemens,
I was unable to trigger the exact point from where this lock object has triggered.
But I am sure that it is a standard SAP process which is locking while releasing the billing documents.
Now my query is why SAP why SAP'S standard program VF02 that is internally called by VFX3 (RVFAKSPE) and that can be submitted in background mode will use ESRDIRE lock whil each time it releases the block?
The problem I am facing is - there are different BATCH jobs and all are for VFX3 with different variant so that no billing document is processed by two different jobs at same time. However the lock entries ENQUEUE_ESRDIRE is creating problem as it is creating locking issue and hence the jobs are processed longer than expected. This is evident from ENQUEUE trace of ST05.
Is VFX3 ( In version 4.5B) is meant for running 1 background job of VFX3 at a time?
Regards,
Pratyusha

Unable to Modify standard program RAZUGA01

Similar Messages

Maybe you are looking for