Unable to modify text in lower section of a completed page in PAGES

I am unable now to edit text in the lower sixth of a page in a multipage Pages document.
If the cursor is activated higher up the page then moved downwards - letter by letter - using the > arrow key it is possible to achieve the objective.
The cursor will not appear in the lower sixth of the page just by clicking the mouse in the normal pattern.
Also, text within a "text box" now disappears as the box is moved into the lower sixth of a page! It reappears as the box is moved back up the page!
How do I sort these problems out? Earlier in the multipage project I was having no problems.

Sheena
What version of Pages are you using?
What else is in the document? Tables? Or is this actually in a table?
It sounds like there is an object with Text Wrap on in the place where you are having problems:
Menu > View > Show Layout/Invisibles
Peter

Similar Messages

I am unable to modify template properties

Hello,
I have noticed that I am unable to modify properties of my template. The "Template Properties" menu is disabled.
I made a basic html page and saved as template, by thinking that my template is not proper.
But nothing change
What migth be reason for this strange situation in CS5 and the any solution?
Thanks

Of course I have editable regions.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>

head
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Untitled Document</title>
</head>
<body>
EditRegion1
OptionalRegion1
</body>
</html>
I am trying to change OptionalRegion1 property to enable/disable

I am unable to receive texts on my new LG G2 when sent from some other iPhones

I had an iPhone 4 and switched to LG G2 android. I am unable to receive texts on my new LG G2 when sent from some other iPhones. I've done everything Sprint and Apple have suggested - turned off imessaging, made sure the contact info on the other iPhones is plain mobile numbers, deactivated my iCloud account. Nothing is working. Anybody have any suggestions?

See this support document http://support.apple.com/kb/TS5185. If you have done everything there, then look at the last line which says to get in touch with Apple Support. This is not Apple support, this is a user to user forum. Call Apple support based on your location with information from this support document. http://support.apple.com/kb/HE57

Unable to view the "Discovery Application" section under studio.

Hello,
I have installed OEID 3.0, using integrator I have loaded the sample getting started application to the server successfully.
I am following the instructions given under the getting started guide, after loading the data to the server I am able to login successfully to studio http://localhost:8101.
However in the login screen I am getting only the "welcome Admin Admin!" menu, under which I am unable to see the Discovery Application section.
But I followed the guide to access the control panel and change the default datasource, as per the guide I clicked "Back to home" but still Discovery Application section is not visible.
Which is obviously used for creating and managing the applications.
But I managed to create the application by selecting control panel > Portal > Application and I created the application and managed to load the EID_3.0_SampleApp.LAR file and able to successfully launch the studio.
Can anyone kindly let me know why I am unable to view the discovery application section till now?
Thanks.

I don't completely follow yet what you are seeing in your Studio instance. Is your "Discovery Applications" panel not showing, or is it empty, or is the "New Application" button missing? Perhaps you could paste a screenshot somewhere and link it here.
You say you are having problems with datasources - could you paste your data source JSON, and any error messages you are getting in the Studio logs?

Unable to get Text to work on iMovie. Clicking on T gets me options, but when I click on any of them, nothing happens.

On iMovie 11, an unable to use Text. I click on T and get options, but nothing happens when I click on any of the options.

Thank you so much! Such a simple solution after hours of frustration!

Why am I unable to change text color from black in LR5 book module?

Why am I unable to change text color from black in LR5 Book Module?

I'm assuming you clicked on the color patch besides the word <Character> to open the color picker window.
At the right side of this window there is a vertical bar that has 2 horizontal black lines at the bottom.
This is actually a slider. Pull it upwards with the color picker and color will appear in the window.

I am trying to use motion tracking to have text follow a section of the background.The text box follows the motion path, but the text just sits there. What am I doing wrong?

I am trying to use motion tracking to have text follow a section of the background.The text box follows the motion path, but the text just sits there. What am I doing wrong?

Motion basically looks at the the source footage and it's timing (in the timing section of the Inspector) when analyzing for tracking. Filters are basically ignored by the tracker. Retiming actions, like time re-mapping, or retiming behaviors that are applied before the tracker should be used by the tracker. Did you change the timing after doing the tracking? If so this would also require you to re-track the shot. Understanding that you found a workaround, describing the effects you applied would help to explain why you ran into problems.
Cheers!

Unable to type text in Text Frame

After I draw a text box on my first page, I am unable to add text to it.
There is nothing else on the that page, but the blinking cursor never shows up no matter how many times I click on the text frame.
I checked for preflight errors, there is none.
All these happen only on the first page. The other pages are fine.
Im still new to Adobe In Design, so I need your help!

Twice in one day... See http://forums.adobe.com/message/3790080#3790080 for starters, and having the file available will save lots of guessing if yo don't figure it out yourself. Check the master page, by the way, for a master text frame that might have text wrap applied to it erroneously.
To shZAre your file, zip it and put it on a server someplace, then post a link here. If you don't have your own server, you can send it to yourself using a service like YouSendIt.com and post the link.

HT4528 i upgraded from an iphone to a Samsung galaxy and now i am unable to receive text messages now from iphone users.the iphones think that my number is still another iphone and always sends a message as imessage.

Upgraded from iphone to a Samsung and now i am unable to receive text messages from other iphone users unless they disable imessage .
Being my original number was on an iphone is why this is happening .
Please help. Almost everyone has an iphone

You should have turned iMessage off before disabling the phone. Do you still have the phone so you can turn iMessage off? If not, you will need to go to Apple support on their website and delete the product from your profile.

Can't modify text on Type Overlay in Acrobat Pro 9.0

I'm trying to modify a menu for a local restaurant. They gave me the file as a .pdf file, and it's listed as a Type Overlay file. Advanced editing and touch up text tool do not work (I'm trying to delete an item that is no longer served).
The entire menu page comes up as an object / picture, not as text. Using the touch up text tool does delete the desired text, but it changes the entire layout of the page, moving text over several columns and covering existing text. Trying to realign the text by putting space in the missing pieces location just compounds the problem in several bizarre ways.
How do I determine what type of format this is. It says there are no layers, it appears to be one image, but deleting or changing any portion of the image causes undesired movement of text. How do I delete, or insert text as the menu changes?
Thanks!
John

Here's an update to the problem I was having.
I couldn't find any way to edit the pdf "as is" in Acrobat, but through obstinance and trying everything at my disposal that had even a slim chance of working, I came up with a solution.
By opening the pdf up in Adobe Illustrator, it gave me the ability to cut / paste, delete and modify the text without problems or errors. I was then able to resave as a pdf. The file works great, and though I still can't modify it in Acrobat, Illustrator works fine until I get the original file.
On a related note, Illustrator allowed me to remove the menu background from the pdf file and save it (the text only) as another pdf, getting rid of clutter but maintaining alignment so it still prints on the menu paper and stays in line with the graphics.
I hope this helps others!
John

Problem in reading the modified text from text editor

Hi all,
Im using text editor for saving the long text entered in the text editor as standard text in So10 tcode.
Here im facing an issue in reading the text from text editor. That is, when the text is entered by the user for first time, then the below method reads the text successfully.   But when i do some changes in the existing text present in the text editor and try to read, then the modified text is not returned by the below method.
I use the "CALL METHOD g_editor_ftext1->get_text_as_stream" to read the text. Given below is my code.
CALL METHOD g_editor_ftext1->get_text_as_stream
   IMPORTING
      text                   = ig_text_table
      is_modified            = g_xthead_updkz
    EXCEPTIONS
      error_dp               = 1
      error_cntl_call_method = 2
      OTHERS                 = 3.
The return value of "is_modified" is always returned as 0.
Could anyone pls help how to read the modified text using the above method?

Check if this works and if it works then there should be some mistake in your coding
REPORT abc.
PARAMETERS:pa1 TYPE bwart.
DATA: container TYPE REF TO cl_gui_docking_container,
      editor    TYPE REF TO cl_gui_textedit,
      report    TYPE syrepid,
      mod TYPE i,
      modon TYPE i.
DATA:tlines    TYPE TABLE OF tdline,
     wa_tlines TYPE tdline.
AT SELECTION-SCREEN OUTPUT.
report = sy-repid.
IF container IS INITIAL.
    CREATE OBJECT container
                 EXPORTING repid     = report
                           dynnr     = sy-dynnr
                           side      = container->dock_at_left
                           extension = 1070.
    CREATE OBJECT editor
                EXPORTING
                     parent     = container.
ENDIF.
wa_tlines = 'This is test before a change'.
APPEND wa_tlines TO tlines.
CALL METHOD editor->set_text_as_r3table
     EXPORTING
           table              = tlines
     EXCEPTIONS
           OTHERS             = 1.
CALL METHOD editor->go_to_line( 1 ).
START-OF-SELECTION.
CLEAR tlines[].
CALL METHOD editor->get_text_as_stream
            EXPORTING
            only_when_modified = '1'
            IMPORTING
            text = tlines
            is_modified = modon
            EXCEPTIONS
            error_dp = 1
              error_cntl_call_method = 2
              OTHERS = 3.
IF modon = 1.
    WRITE 'Changed'.
ELSE.
    WRITE 'Not changed'.
ENDIF.
WRITE modon.

I'm unable to copy text out of an ADE book.

Recently bought a new Windows PC and transferred all files to it from my old one. Installed ADE successfully, gave it my authorization ID and all is well. I'm able to open the book I'm interested in and browse all through it. But I'm unable to copy text out of it. I highlight the text in the book and when I either right-click or pull down the Edit menu, the Copy function is grayed out and clicking on it does nothing. Ctrl-C also doesn't do anything. This worked on my old PC. What's up here? Thanks for any help. Jim

I am having the same exact problem.

Unable to modify embedded Excel spreadsheet

Unable to modify embedded Excel spreadsheet
I am having problems with 2 Xcelsius files. When I open them and try to change the tab name, the embedded Excel spreadsheet is coming up that it is protected, but I have never put a password on these 2 files.
The following pop-up message appears - "Workbook is protected and cannot be changed".
Please advise.
Thanks,
Neil.

HI Neil
Assuming your using Xcelsius 2008, have you tried exporting the spreadsheet (Data > Export), check the exported workbook for passwords and then re-imported the spreadsheet back into your model?
Regards
[Charles|http://www.reportex.co.uk/xc_waterfallchart.html]

Unable to highlight text in my PDF files

Iam unable to highlight text in my PDF files ,The tool shows in the toolbar and i am able to select it .But when i go to the related text which i wish to highlight ,nothing happens . kindly advise, what am i doing wrong. The comment tool is working fine , and i am able to put text comments in the box.But i need to highlight certain text also.
.I am using Adobe reader version 10.1. I reinstalled the program two times but still the highlight tool does not works .

May be that the PDF files doesn't contain any text. What did you get when you use File > Save As > Text...

Unable to enter text in popup window

Hi,
I am new to OATS OpenScript. I am unable to enter text in the popup window.
Here's my situation in detail:
My application is in Oracle Siebel and the pop up is a webpage dialog.
When I click on the Button in Siebel application, the webpage dialog pops up and there is a text box and a Submit button.
When I was recording, I was unable to record the webpage dialog as it was not identified by Openscript recorder.
Hence, I recorded the webpage seperately and the standalone scripts runs fine. It is able to navigate to the page and enter the text in textbox and click submit button.
Now I am trying to integrate those Webpage XPath in my existing script but it fails to recognize the webpage or the textbox from the popup webpage dialog.
Has anyone able to figure out how to record the popup windows using OATS OpenScript? Please help.
Thanks,
Sapna

Hi Deepu,
Thanks for replying.
web:window[@index='0' or @title='Enter Card Number']/web:document[@index='0']/web:body[@index='0']
web:window[@index='0' or @title='Enter Card Number']/web:document[@index='0']/web:input_text[@id='txt_name' or @name='name' or @index='0']
web:window[@index='0' or @title='Enter Card Number']/web:document[@index='0']/web:input_submit[@name='submit' or @value='Submit' or @index='0']
These are the XPaths I get when I record that webpage seperately.
Also when I was recording the webpage alongwith the siebel app, I got these XPaths for the same objects:
/web:dialog_unknown[@text='Enter Card Number -- Webpage Dialog' and @winClass='Internet Explorer_TridentDlgFrame' and @index='0']/web:accText[@index='2']
Submit Button
/web:dialog_unknown[@text='Enter Card Number -- Webpage Dialog' and @winClass='Internet Explorer_TridentDlgFrame' and @index='1']/web:accPushButton[@index='0' or @name='Submit']
I also read in one of the forums that if the object is not added, I need to add it manually. How can i do that?:
Popup wb window is not detected by openscript
Thanks,
Sapna

Unable to modify text in lower section of a completed page in PAGES

Similar Messages

Maybe you are looking for