Unable to monitor audio during capture

I'm using FCP6 to capture footage shot with a JVC GY-HD100U at HDV 720p24. I'm using a JVC BR-HD50 deck to capture from, connected to my MacPro 3 GHz quad via firewire.
In the Audio/Video Setting dialog box, the Sequence Preset is "HDV 720P24". My Capture Preset is "HDV", Device Control Preset "HDV FireWire". Video Playback shows "[Missing] Apple Firewire NTSC (720 x 480)" and offers only the options of None and Digital Cinema Desktop Preview–Main as alternate choices. Both HDV options are greyed out. The Audio Playback option is set to Default.
With this setup, controlling the deck remotely from the capture window, I get video but no audio. The only audio I get is when the deck is connected to my video monitor and I use it to monitor the output of the deck. The audio is there when I play back the clips after capture but I cannot monitor the sound with the computer's speakers. If I go to the A/V Devices tab, under Video, it shows the same "[Missing] Apple Firewire NTSC (720 x 480) with the same choices described above, and the Options button next to it doesn't do anything.
Can anyone think of anything I've missed in the initial setup?
Keith
Message was edited by: Keith R Thompson

Keith,
For whatever reason (perhaps the intense processor needs) HDV does not allow you to monitor your audio during capture. The computer just will not do it. What I have done, if I really want to hear what's happening durning capture, is plug my speakers into the headphone jack of my XL H1. Due to the processing that's going on, the audio "lags" behind the video by a couple of seconds.
I'm pretty sure this is not a setup problem, but just a limitation due to the nature of your format.
Hope that helps!
~Luke

Similar Messages

Monitoring audio on capture

Folks
New 'puter, so I can get back into video, in fact I'm working on a project that was shelved 5 years ago. I have 11 concert tapes to edit, so being able to select clips based on audio quality is important.
I have a Sony TRV240 digicam connected by firewire, and I have the analog stereo/video cable plugged in, then with a tricky series of adaptors, I feed the audio into the G5 audio in, expecting to monitor the sound on playback from the camera on my spiffy Monsoons. Not so. Headphones work, but I have no volume control. Audio input is set in system prefs to audio in, not mic. The audio meters tell me that the audio is happeneing.
What am I doing wrong?
Dave Tinker

David
Nothing. FCE does not give you audio during capture because the firewire cable is active and effectively mutes the Mac speakers. Monitor the sound from the camera with earphones or set up your speakers from the camera if you like. The capture window is only a basic idea of what is being sent to the Mac. Some latency with sound is there if you could hear it and the picture is dodgey anyway. The capture window image does not represent the true quality of the DV footage.
Al

Monitoring audio during record session

I'm using Soundbooth (CS4) to digitize LP's on my Mac using an Audio Technica AT-LP120 USB turntable.
I'm able to capture the audio in Soundbooth, but I'd like to be able to hear the audio during the recording session.
I can't seem to figure out how to do that. Can someone give me a little coaching please?

There's a button in the middle of the recording dialog box called "Monitor Input during Recording".

Monitoring audio during recording...

Simple question folks. Is there a way to monitor my audio input from my internal speakers of my laptop while recording? MIDI comes through the speakers fine. When I use the headphone jack from the laptop to my mixer that's fine and I'm sure headphones into my laptop would work fine too, but I want to be at a distance from the laptop and be able to record. I'm using the subouts from my mixer to feed the audio input of the laptop. The headphone jack is not being used in this setup (until I want to monitor over my studio speakers). Maybe I'm missing something obvious. Working with MacBookPro, a Mackie mixer and Garage Band 08. Thanks for your help.

http://www.bulletsandbones.com/GB/GBFAQ.html#monitoron
(Let the page FULLY load. The link to your answer is at the top of your screen)

Monitoring Audio During Live Event

If I connect headphones to a device that's feeding the audio into Connect,
will the audio I hear be from before it goes to the Connect server or
after it comes back from the server?

My goal is to determine the best way to monitor the audio from the end
user's perspective. I learned the hard way that Connect does not like
activating both speakers and mic on the same device for obvious reasons
but has no problem doing so with a headset. So, it must know if the sound
is going through a headset or through the device's speakers. But when I
try to use simple headphones, i.e. no attached microphone, but still feed
audio through the device's aux input, the audio I hear in the headphones
appears to not be delayed as the audio from the server would be. This
suggests that Connect? or the device itself- is feeding the audio to me
BEFORE it sends it to the server for distribution. I want to hear the
audio AFTER it's gone to the server so that I can most accurately
experience the same conditions as my attendees. If they report choppy
audio but mine is fine, I know that the problem is local for them. That
type of thing.

Audio preview during capture

Hi
How do I get audiopreview during capture?
When I playback audio output works fine, during capture its off.
When I look in the Audio/Video Settings in the tab Capture Settings I can read in the right summary field that the speaker is off, how do I get this on?

HDV does not allow monitoring audio during capture.
If you are working with DV, there is a checkbox to turn it on. The location of the box varies with the version of FCP.
The simpler solution is to just to route the analog audio out from your deck or camera to a pair of speakers. This has the beauty of not adding to the processing overhead during capture.
x

Final Cut Express: No audio when capturing from camcorder

When capturing video from my "Sony TRV 18" digital camcorder and a Canon ZR500 digital camcorder
into Final Cut Express 4.0.1 via fire wire to my scratch disk - a LaCie external hard drive -
I get the video in my browser but it has no accompanying audio.
When I move a captured clip from the browser to the viewer and time line, the video shows up, but (1) there is no accompanying audio shown in the audio time line, (2) no audio can be heard and (3) the audio meters show no action.
My Easy Setup settings for audio match my camera audio settings.
I've used different firewires between the camera and the scratch disk. Still the same.
This has been a problem for about a month. Everything worked fine before. To make project deadlines, I have worked around this anomaly by capturing clips in IMovie 4 on my older Mac laptop than transferring the media clips to my Final Cut Express scratch disk. That works, but it is time consuming and requires rendering of all the audio.
I use an IMac with OSX 10.6.5 with 266 GHz intel Core i5.
Thank you in advance for any tips that could help.

Hi Sid
I get the video in my browser but it has no accompanying audio.
YES - This is the way FinalCut Express AND Pro works !
If You need the audio - Then You connect a small set of speakers to Your miniDV Camera
(headphone out)
alt. if no phono-out on Camera is to connect a small TV to the Camera analog way
and here You can both see and hear during Capture
(BTW - Connecting a small TV (or if §§§§§ is no problem a reference monitor
§5-10,000 or even more) is a Very good way of keeping Quality control during
editing process. Eg Transitions, audio levels, color fidelity etc. I do and the
ref monitor are well compared to my final DVDs.)
There are NO WAY that You can monitor audio during Capture in any FinalCut versions !
Yours (been there and done that - or as said in Sweden "butted Your head at it") Bengt W

No Audio during Log and Capture

Hello, I have FCP 6.0 and am unable to hear my audio during log and capture. I have this problem on all 5 G5 Macs that I have, and have tried different editing docks and cables. I have used FCP for more than 5 years and have never had this problem. iMovie has audio during capture, so I am convinced that there is a pre-set in FCP that I don't have checked properly, but I've been over them many times and still have no answer. I searched past forums and didn't really find anything helpful to me.
My pre-sets are set to DV NTSC 48kHz and the playback pre-sets are set to default. I can hear audio of my clips after I log and capture, but I still need to hear audio during importing. I'm more confused than anything. If anybody has had this problem before or any suggestions for me, I'm all ears.
Thanks.
John

... as Bogie says.
However... this is a non-feature that dates back to slower CPU days... yet, still with all the different formats and such I (ME!!) I believe it's still good practice to leave it off.
Devoting as much CPU work to the capture process lessens the chance for something to go wrong. You can easily monitor the audio directly out of the deck as needed.
Sure -- octo cores need 30 apps open just to get your money's worth and I'm sure you won't have any issues using an 8th of one to send audio thru itself while the other 7 and 7/8ths are used for capture... but who wants to risk it?
Not me... I'm to old to change my ways.
Blast you FCP v1.2.5 on a beige G3 with 7gig and 15gig hard drive -- you taught me well.
CaptM

Turning OFF Audio Playback during capture?

When capturing a tape from my video camera in Premiere Pro, How do I turn off the audio playback while recording?
I want to record the audio and the video, but I don't want to hear the tape's audio playing back through my computer speakers while recording. The technician I spoke to over the phone was extremely unhelpful and suggested I simply mute my computer speakers if I don't want to hear it. What if I want to listen to music or am trying to watch another video file in a different program without having to hear the premiere pro audio blaring over it. Please someone tell me the rude technician I spoke to did not understand clearly what I was asking and if anyone knows how to accomplish this or can shed anymore light on the topic.
I just spent 40 minutes on the phone with an adobe tech support rep who took 40 minutes to correctly understand the issue I was calling for and then informed me that the functionality does not exist within the premiere pro software. Sorry if this comes off as a little edgy, but my tech "support" call was extremely frustrating and now to find that premiere pro wont let you listen to anything in any other program while recording seems a little rediculous.
Thanks,

It is risky to run other applications while capturing footage. May lead to dropped frames. I have found that Premiere is a resource hog and more likely to have this problem than other capture programs. Not that Premiere is a bad program for capture, but you might find an alternative that provides a better solution for your specific need.
It has been a few years since using Scenalyzer, but I always found that program to be extremely reliable and flexible. And it has the capability of silencing the audio during capture. Since you didn't say what format you are capturing I can't say whether Scenalyzer will work for you. Check it out.
I don't think Harm was being condesending at all. He is simply warning you about the potential problems your system may face by attempting to multi-task in the manner you describe. It's up to you to decide if you want to follow the advice you seek here.
Good luck

No video Preview During Capture

Here is the scoop:
Adobe Premeire CS5
Windows 7 64bit
Canon XL2
Capturing DV NOT HDV
Canon standard device control as there is no preset listed for the XL2
Video and audio actually captures fine. I can hear audio during capture but cannot see any video.
I know there is no video preview when capturing HDV but I am capturing DV.
Again this is CS5 NOT 5.5 so .dll fix is not an option
Thanks in advance.

FIXED!
Heres how it went:
Went to Device Manager and let windows look for an updated driver for my Graphics Card (Radeon HD 4200). Windows said the most current driver was installed. It was NOT the most current driver. I went out to ATI and got the most current driver, installed, reboot and OH JOY! I get video in the capture window during preview AND during capture (of DV)!
I also let windows (device manager) look for updated drivers for sound and it said the driver was the most current. Again, it was not. so the moral of the story is...Don't trust Device Manager on current driver versions.
Hope this will help some folks out there.
Side Note*
Most of us spend hours on forums looking for answers/fixes to particular problems. Most replies I see are either in the vein of "I have that problem too" or " try this, it worked in this OTHER version or try this OTHER software" etc. If you dont have an answer/fix for the problem, dont post.
ON the flip side of that, when posting a problem you want an answer to, Give all the pertinent information in your initial question. " Premiere crashes when I plug up my camera" does NOT suffice! What version of Premiere, what camera, what OS, What kind of connection, etc.

Sound Audible during capturing

Hi, Suddenly I can hear the audio during capturing, HDV, anyone know how to turn it off?
Thanks,
Andy

you're not alone. I've been having the exact same problem for months. FCP 6, capturing HDV. I can't turn the audio preview off. I can't listen to itunes without hearing what is being captured.
here's my previous unresolved post:
http://discussions.apple.com/message.jspa?messageID=7052428#7052428
still haven't figured it out. I tried switching to capturing DV, turning the audio Preview on and then off and then switched back to HDV. still no solution. Apparently there are some that wish they had the opposite problem.

Video preview during capture CS3

Video preview during capture is not working even though settings are at preview video and audio during capture.
The work around seems to be to go ahead record anyway (red button) then it works after I paste the captured audio onto the timeline.
When pasting it to the timeline the video appears. The video appears during subsequent captures. It seems like a bug in CS3. This was not a problem with PP 1.5
Thanks

A few more of
these details will help us help you.
Cheers
Eddie
Forum FAQ
Premiere Pro Wiki
- Over 250 frequently answered questions
- Over 100 free tutorials
- Maintained by editors like
you

No Audio in Capture Preview Window

I don't have any audio while watching videos in the capture window BEFORE capturing them. I understand that FCE doesn't have audio DURING capture and the audio is there after it's captured, but I can't tell which video takes to capture without hearing the audio first before logging them for capture. When using FCP on my G5 I am able to hear the audio from the tapes prior to logging. Please advise. Thanks.

are you saying that this is just another thing that FCE doesn't do or is it a setting I need to fix?
It's, doesn't do.
Al

How can I turn OFF audio monitoring during capture from tape?

FCP has a very useful check box that allows you to turn off audio monitoring during capture, so you can listen to other things whilst the batch captures. Is there any way to do this in PP? If not, how can I make a feature request?
I'm using PP CS6.
Thanks for any help.
Dominic

The only other solution I can offer is to go to "edit" "preferences" then select "playback". Under playback set the default audio device to your capturing device instead of the adobe desktop audio. This will allow you capture but not have to listen to whats being captured. However once it's done capturing you'll have to set it back to adobe desktop audio otherwise you can't hear what you're editing in your timeline.
Other than that I'm out of ideas sorry.

Multibridge Pro no audio monitoring during capture

I cannot get audio monitoring during capture, from betacam (component) or dv, I tried everything I can think of, does anybody else is running to the same problem?
(running mac pro, plenty of ram, Os version 10.5.2, decklink software 6.6.2, FCP 6.0.2)
Thanks for any suggestions.

I tried to reboot the multibridge many but to no avail. Regarding the monitoring, I do not really care about monitoring the upload, but I want to be able to log the clip via final cut, and it should work, however it does not.
Also I wanted to know if users of the multibridge have issues with the video levels? I just switch from a HD Decklink card and the difference in level is not right, the multibridge is much to bright. Any suggestions?

Unable to monitor audio during capture

Similar Messages

Maybe you are looking for