Unable to mount volume
I have a partitioned USB drive hooked up to my Intel 24" iMac. Two of the partitions are HFS+ formatted while the third is MS Dos File System FAT32 formatted. On my G4, I can mount the two HFS+ volumes when I go to the Network icon in my sidebar. I can see them in the iMac list of volumes. I cannot see the FAT 32 partition in the list at all. Is this to be expected, or is there a way around it so that I can mount my USB drive without having to unplug it from the iMac and plugging it into the G4.
I think that if the partition table is GUID, your non-Intel Mac won't be able to see the FAT32.
Check and see if that's the case.
Scott
Similar Messages
-
Unable to Mount "Mac OS standard" Volumes
I am unable to mount volumes of file system "Mac OS standard." In this case I am trying to mount an image I made of a Starcraft BroodWars CD, but my computer claims that the file is damaged. However it says this of all of my saved images and I find this to be unlikely. I attempted to burn the image to disk using the Disk Utility, but even while disk utility seems to recognize the CD, it will still not mount it. Attempts to verify the disk yield the error:
Verifying volume “Brood War CD”
Checking HFS volume.
Invalid number of allocation blocks
Volume check failed.
Error: Filesystem verify or repair failed.
Any advice?Yes, I think you need to repair your hard drive from your disk. Did you try to reset the Pram?
If my advise is something you already tried, remember there is no way for me to know this.
If you want instructions on either, post back.
I wish you well.
Ray -
Unable to mount XSAN volume on client workstation
We just reimaged one of our machines and we are now unable to mount the xsan volume. Originally when the machine hooked up the IP was wrong and the XSAN couldn't see it. This has been fixed and the XSAN sees it now and it is authenticated, but when we try to mount the volume we get this error
Jan 26 13:54:48 *** Xsan Admin[23616]: ERROR: Error reading computer properties: kOfflineError (0)
Jan 26 13:55:37 *** Xsan Admin[23616]: ERROR: Error mounting volume…: Server returned a non-zero status code (100007)
Jan 26 13:55:48 *** Xsan Admin[23616]: The temporary directory at "/private/var/folders/Eu/Euvo7L8cHAmWwo7ntmj8ak+TI/TemporaryItems/(A Document Being Saved By Xsan Admin 33)" could not be deleted.
The *'s was the name of the machine, apple has been little to no help. We have tried removing the machine form the XSAN and then adding it back in, same issue. Tried reinstallingt eh client, same issue. Any ideas?This is the error on server
ERROR: Error mounting volume…: Server returned a non-zero status code (100007) -
Unable to Connect to Mounted Volumes via AFP; Local Network
Server's name is Boing. If I try: Connect to Server: afp://Boing.local I'm given a list of possible volumes. However, this list only includes my home directory and every user's Public Folder. I am an admin user:
uid=516(mnewman) gid=516(mnewman) groups=516(mnewman),101(com.apple.sharepoint.group.1),105(com.apple.sharepoint. group.3),103(com.apple.accessscreensharing),98(_lpadmin),102(com.apple.access_ssh),81(_appserveradm),79(appserverusr),80(admin),20(staff),106(com.apple.sharepoint.group.4),104(com.appl e.sharepoint.group.2)
I should have access to all mounted volumes:
drwxrwxr-t 56 root admin - 1972 May 17 13:39 /Volumes/Banana
drwxrwxr-x 13 mnewman mnewman - 510 Jan 14 09:17 /Volumes/Farang
lrwxr-xr-x 1 root admin - 1 May 21 10:46 /Volumes/Fuji -> /
drwxrwxr-x 12 mnewman mnewman - 476 Apr 20 08:29 /Volumes/Guava
drwxrwxr-t 17 root admin - 646 May 17 13:39 /Volumes/Lime
If I ssh into Boing, I can get to everything.
If a different admin user connects to Boing via afp she can get to everything.
What has happened to my account that permits me afp access only to public shares?Amazing:
I used Apple's Workgroup Manager to add a short name (mgnewman) to my account.
Using that short name I can now connect to Boing using the Finder's Go->Connect To Server...
and, all the mounted volumes are shown.
Workgroup Manager shows "mnewman" as my default short name. But, it doesn't work right
for afp connections either through the GUI or command line. But, my newly added short user
name works just fine. (Oddly, my Dot Mac e-mail address, also shown as a short user name in
Workgroup Manager, also works....)
I suspect that the Directory Services database is somehow corrupt.
Is there a way to rebuild it? -
Kanaka Client unable Mount volume
I have OES11SP2 on SLES 11 SP3 on which I am running KANAKA ENGINE to mount volumes on MAC Client from servers running under same Tree.
Created eDirectory user account which have rights on volumes from two servers under the same tree.
example: 1) abc (volume) under Server1 (Running Kanaka engine)
2) xyz (volume) under Server2
Note: Tested AFP connectivity working without issues for both the volumes from MAC OS, also eDirectory users can map both volumes on windows machine with Novell client login.
Issue is I cannot mount volume from Server2 using KANAKA Client on MAC OS. However Server1(running kanaka engine) can able to mount.
any help is highly appreciated.01 2014-12-14 20:03:42 10800 1 0001 13780 7f5258c2c760 Engine::SignalHandler() - Invoked. Signal = {SIGTERM} 15.
01 2014-12-14 20:03:45 10800 5 0001 13780 7f524e92d700 WD: Engine mainline thread is leaving the Watch Dog function...
82 2014-12-14 20:03:45 10800 0 ff08 13780 7f524e12c700 <CONFIG><LEVEL>5</LEVEL><CATEGORY/></CONFIG>
82 2014-12-14 20:03:45 10800 0 ff09 13780 7f524e12c700 <CONFIG><LEVEL>5</LEVEL><CATEGORY/></CONFIG>
01 2014-12-14 20:03:45 10800 5 0001 13780 7f524e92d700 ML: Engine is shutting down...
01 2014-12-14 20:03:45 10800 5 0001 13780 7f524e92d700 ML: Terminating the HTTPx Server subsystem...
01 2014-12-14 20:03:45 10800 5 0001 13780 7f524e92d700 ML: Terminating the User Index Manager subsystem...
01 2014-12-14 20:03:45 10800 5 0007 13780 7f524e92d700 Index Manager: Shutting Down...
01 2014-12-14 20:03:45 10800 5 0007 13780 7f524e92d700 Index Manager: Waiting for Scheduler Thread to Terminate...
01 2014-12-14 20:03:46 10800 5 0007 13780 7f524e92d700 Index Manager: Waiting for All Worker Threads to Terminate...
01 2014-12-14 20:03:46 10800 5 0007 13780 7f524e92d700 Index Manager: Shut Down Complete...
01 2014-12-14 20:03:46 10800 5 0001 13780 7f524e92d700 ML: Configuring the Novell XPLAT environment to no longer perform logging...
01 2014-12-14 20:03:46 10800 5 0001 13780 7f524e92d700 ML: Saving state information...
01 2014-12-14 20:03:46 10800 5 0001 13780 7f524e92d700 ML: Saving the Salt state information...
01 2014-12-14 20:03:46 10800 5 0001 13780 7f524e92d700 ML: Saved the Salt state information, bResult = 1.
01 2014-12-14 20:03:46 10800 5 0001 13780 7f524e92d700 ML: Completed saving state information, bOK = 1.
01 2014-12-14 20:03:46 10800 5 0001 13780 7f524e92d700 ML: Engine has shut down. Thread is terminating...
01 2014-12-14 20:03:46 10800 0 8001 13780 7f524e12c700 Shutting down the Logger. Closing log file "/var/opt/novell/kanaka/engine/log/novell-kanakaengined-20141202-132804.log".
81 2014-12-14 20:03:46 10800 0 8001 13780 7f524e12c700 <LOGFILECLOSE/>
81 2014-12-14 20:03:49 10800 0 8001 10919 7f517cb27700 <LOGFILEOPEN/>
81 2014-12-14 20:03:49 10800 0 8001 10919 7f517cb27700 <LOGGER><VERSION>1</VERSION><APPNAME>novell-kanakaengined</APPNAME><TZBIAS>10800</TZBIAS><OSVERSIONINFO>Kernel Name: Linux, Architecture: x86_64, Kernel Release: 3.0.76-0.11-default, Kernel Version: #1 SMP Fri Jun 14 08:21:43 UTC 2013 (ccab990), Machine HW Name: x86_64</OSVERSIONINFO><OSBITS>64</OSBITS><APPBINARYFILESPEC>/opt/novell/kanaka/engine/bin/novell-kanakaengined</APPBINARYFILESPEC><APPBITS>64</APPBITS><AppVersion/><PROCESSID>10919</PROCESSID><THREADID>139987961149184</THREADID><LOGFILEPARAMS><ROLLOVERTYPE>2</ROLLOVERTYPE><FILESTORETAIN>10</FILESTORETAIN><FILESIZEMAX>10485760</FILESIZEMAX></LOGFILEPARAMS><LOGLEVELNAMEMAP><ENTRY><LEVEL>0</LEVEL><NAME>Logging Disabled</NAME></ENTRY><ENTRY><LEVEL>1</LEVEL><NAME>Fatal</NAME></ENTRY><ENTRY><LEVEL>2</LEVEL><NAME>Critical</NAME></ENTRY><ENTRY><LEVEL>3</LEVEL><NAME>Error</NAME></ENTRY><ENTRY><LEVEL>4</LEVEL><NAME>Warning</NAME></ENTRY><ENTRY><LEVEL>5</LEVEL><NAME>Informational</NAME></ENTRY><ENTRY><LEVEL>6</LEVEL><NAME>Success</NAME></ENTRY><ENTRY><LEVEL>7</LEVEL><NAME>Verbose</NAME></ENTRY><ENTRY><LEVEL>8</LEVEL><NAME>Debug</NAME></ENTRY></LOGLEVELNAMEMAP><CATEGORYNAMEMAP><ENTRY><CATEGORY> 1</CATEGORY><NAME>Engine Watchdog</NAME></ENTRY><ENTRY><CATEGORY>3</CATEGORY><NAME>Engine Global Class</NAME></ENTRY><ENTRY><CATEGORY>4</CATEGORY><NAME>UI Session Manager</NAME></ENTRY><ENTRY><CATEGORY>5</CATEGORY><NAME>Web UI Session Manager</NAME></ENTRY><ENTRY><CATEGORY>6</CATEGORY><NAME>Client Manager</NAME></ENTRY><ENTRY><CATEGORY>7</CATEGORY><NAME>Index Manager</NAME></ENTRY><ENTRY><CATEGORY>8</CATEGORY><NAME>Login Script Parser</NAME></ENTRY><ENTRY><CATEGORY>32769</CATEGORY><NAME>Logger</NAME></ENTRY><ENTRY><CATEGORY>32770</CATEGORY><NAME>FSTools</NAME></ENTRY><ENTRY><CATEGORY>32771</CATEGORY><NAME>DSTools</NAME></ENTRY><ENTRY><CATEGORY>32772</CATEGORY><NAME>HTTPxServer</NAME></ENTRY><ENTRY><CATEGORY>32773</CATEGORY><NAME>HTTPxClient</NAME></ENTRY><ENTRY><CATEGORY>32774</CATEGORY><NAME>TaskMgr</NAME></ENTRY><ENTRY><CATEGORY>32775</CATEGORY><NAME>NWXPlat</NAME></ENTRY><ENTRY><CATEGORY>32776</CATEGORY><NAME>Storage Resources</NAME></ENTRY><ENTRY><CATEGORY>32777</CATEGORY><NAME>Security</NAME></ENTRY><ENTRY><CATEGORY>32778</CATEGORY><NAME>Thread</NAME></ENTRY><ENTRY><CATEGORY>32779</CATEGORY><NAME>OS Util</NAME></ENTRY><ENTRY><CATEGORY>32780</CATEGORY><NAME>Scheduling Service</NAME></ENTRY></CATEGORYNAMEMAP><LOGFILELOGLEVELMAP><ENTRY><CATEGO RY>0</CATEGORY><LEVEL>5</LEVEL></ENTRY><ENTRY><CATEGORY>1</CATEGORY><LEVEL>5</LEVEL></ENTRY><ENTRY><CATEGORY>3</CATEGORY><LEVEL>5</LEVEL></ENTRY><ENTRY><CATEGORY>4</CATEGORY><LEVEL>5</LEVEL></ENTRY><ENTRY><CATEGORY>5</CATEGORY><LEVEL>5</LEVEL></ENTRY><ENTRY><CATEGORY>6</CATEGORY><LEVEL>5</LEVEL></ENTRY><ENTRY><CATEGORY>7</CATEGORY><LEVEL>5</LEVEL></ENTRY><ENTRY><CATEGORY>8</CATEGORY><LEVEL>5</LEVEL></ENTRY><ENTRY><CATEGORY>32769</CATEGORY><LEVEL>5</LEVEL></ENTRY><ENTRY><CATEGORY>32770</CATEGORY><LEVEL>5</LEVEL></ENTRY><ENTRY><CATEGORY>32771</CATEGORY><LEVEL>5</LEVEL></ENTRY><ENTRY><CATEGORY>32772</CATEGORY><LEVEL>5</LEVEL></ENTRY><ENTRY><CATEGORY>32773</CATEGORY><LEVEL>5</LEVEL></ENTRY><ENTRY><CATEGORY>32774</CATEGORY><LEVEL>5</LEVEL></ENTRY><ENTRY><CATEGORY>32775</CATEGORY><LEVEL>5</LEVEL></ENTRY><ENTRY><CATEGORY>32776</CATEGORY><LEVEL>5</LEVEL></ENTRY></LOGFILELOGLEVELMAP><CONERRLOGLEVELMAP><ENTRY><CATE GORY>0</CATEGORY><LEVEL>5</LEVEL></ENTRY><ENTRY><CATEGORY>1</CATEGORY><LEVEL>5</LEVEL></ENTRY><ENTRY><CATEGORY>3</CATEGORY><LEVEL>5</LEVEL></ENTRY><ENTRY><CATEGORY>4</CATEGORY><LEVEL>5</LEVEL></ENTRY><ENTRY><CATEGORY>5</CATEGORY><LEVEL>5</LEVEL></ENTRY><ENTRY><CATEGORY>6</CATEGORY><LEVEL>5</LEVEL></ENTRY><ENTRY><CATEGORY>7</CATEGORY><LEVEL>5</LEVEL></ENTRY><ENTRY><CATEGORY>8</CATEGORY><LEVEL>5</LEVEL></ENTRY><ENTRY><CATEGORY>32769</CATEGORY><LEVEL>5</LEVEL></ENTRY><ENTRY><CATEGORY>32770</CATEGORY><LEVEL>5</LEVEL></ENTRY><ENTRY><CATEGORY>32771</CATEGORY><LEVEL>5</LEVEL></ENTRY><ENTRY><CATEGORY>32772</CATEGORY><LEVEL>5</LEVEL></ENTRY><ENTRY><CATEGORY>32773</CATEGORY><LEVEL>5</LEVEL></ENTRY><ENTRY><CATEGORY>32774</CATEGORY><LEVEL>5</LEVEL></ENTRY><ENTRY><CATEGORY>32775</CATEGORY><LEVEL>5</LEVEL></ENTRY><ENTRY><CATEGORY>32776</CATEGORY><LEVEL>5</LEVEL></ENTRY></CONERRLOGLEVELMAP><SYSLOGLOGLEVELMAP><ENTRY><CATEG ORY>0</CATEGORY><LEVEL>2</LEVEL></ENTRY><ENTRY><CATEGORY>1</CATEGORY><LEVEL>2</LEVEL></ENTRY><ENTRY><CATEGORY>3</CATEGORY><LEVEL>2</LEVEL></ENTRY><ENTRY><CATEGORY>4</CATEGORY><LEVEL>2</LEVEL></ENTRY><ENTRY><CATEGORY>5</CATEGORY><LEVEL>2</LEVEL></ENTRY><ENTRY><CATEGORY>6</CATEGORY><LEVEL>2</LEVEL></ENTRY><ENTRY><CATEGORY>7</CATEGORY><LEVEL>2</LEVEL></ENTRY><ENTRY><CATEGORY>8</CATEGORY><LEVEL>2</LEVEL></ENTRY><ENTRY><CATEGORY>32769</CATEGORY><LEVEL>2</LEVEL></ENTRY><ENTRY><CATEGORY>32770</CATEGORY><LEVEL>2</LEVEL></ENTRY><ENTRY><CATEGORY>32771</CATEGORY><LEVEL>2</LEVEL></ENTRY><ENTRY><CATEGORY>32772</CATEGORY><LEVEL>2</LEVEL></ENTRY><ENTRY><CATEGORY>32773</CATEGORY><LEVEL>2</LEVEL></ENTRY><ENTRY><CATEGORY>32774</CATEGORY><LEVEL>2</LEVEL></ENTRY><ENTRY><CATEGORY>32775</CATEGORY><LEVEL>2</LEVEL></ENTRY><ENTRY><CATEGORY>32776</CATEGORY><LEVEL>2</LEVEL></ENTRY></SYSLOGLOGLEVELMAP><EVENTLOGLOGLEVELMAP><ENTRY><CAT EGORY>0</CATEGORY><LEVEL>0</LEVEL></ENTRY><ENTRY><CATEGORY>1</CATEGORY><LEVEL>0</LEVEL></ENTRY><ENTRY><CATEGORY>32769</CATEGORY><LEVEL>0</LEVEL></ENTRY><ENTRY><CATEGORY>32770</CATEGORY><LEVEL>0</LEVEL></ENTRY><ENTRY><CATEGORY>32771</CATEGORY><LEVEL>0</LEVEL></ENTRY><ENTRY><CATEGORY>32772</CATEGORY><LEVEL>0</LEVEL></ENTRY><ENTRY><CATEGORY>32773</CATEGORY><LEVEL>0</LEVEL></ENTRY><ENTRY><CATEGORY>32774</CATEGORY><LEVEL>0</LEVEL></ENTRY><ENTRY><CATEGORY>32775</CATEGORY><LEVEL>0</LEVEL></ENTRY><ENTRY><CATEGORY>32776</CATEGORY><LEVEL>0</LEVEL></ENTRY></EVENTLOGLOGLEVELMAP><DEBUGPORTLOGLEVELMAP><ENTRY>< CATEGORY>0</CATEGORY><LEVEL>0</LEVEL></ENTRY><ENTRY><CATEGORY>1</CATEGORY><LEVEL>0</LEVEL></ENTRY><ENTRY><CATEGORY>32769</CATEGORY><LEVEL>0</LEVEL></ENTRY><ENTRY><CATEGORY>32770</CATEGORY><LEVEL>0</LEVEL></ENTRY><ENTRY><CATEGORY>32771</CATEGORY><LEVEL>0</LEVEL></ENTRY><ENTRY><CATEGORY>32772</CATEGORY><LEVEL>0</LEVEL></ENTRY><ENTRY><CATEGORY>32773</CATEGORY><LEVEL>0</LEVEL></ENTRY><ENTRY><CATEGORY>32774</CATEGORY><LEVEL>0</LEVEL></ENTRY><ENTRY><CATEGORY>32775</CATEGORY><LEVEL>0</LEVEL></ENTRY><ENTRY><CATEGORY>32776</CATEGORY><LEVEL>0</LEVEL></ENTRY></DEBUGPORTLOGLEVELMAP><SYSLOGPARAMS><SYSLOGLEVEL>1</SYSLOGLEVEL><SYSLOGFACILITY>1</SYSLOGFACILITY><SYSLOGLEVELMAP><ENTRY><LEVEL>1</LEVEL><PRIORITY>2</PRIORITY></ENTRY><ENTRY><LEVEL>2</LEVEL><PRIORITY>2</PRIORITY></ENTRY><ENTRY><LEVEL>3</LEVEL><PRIORITY>3</PRIORITY></ENTRY><ENTRY><LEVEL>4</LEVEL><PRIORITY>4</PRIORITY></ENTRY><ENTRY><LEVEL>5</LEVEL><PRIORITY>5</PRIORITY></ENTRY><ENTRY><LEVEL>6</LEVEL><PRIORITY>5</PRIORITY></ENTRY><ENTRY><LEVEL>7</LEVEL><PRIORITY>6</PRIORITY></ENTRY><ENTRY><LEVEL>8</LEVEL><PRIORITY>7</PRIORITY></ENTRY></SYSLOGLEVELMAP></SYSLOGPARAMS><EVENTLOGPARAMS><EVENTLOGTYPE>0</EVENTLOGTYPE><EVENTLOGTYPEMAP/></EVENTLOGPARAMS></LOGGER>
01 2014-12-14 20:03:49 10800 0 8001 10919 7f517cb27700 Initializing Logger, re-opening existing log file "/var/opt/novell/kanaka/engine/log/novell-kanakaengined-20141202-132804.log".
01 2014-12-14 20:03:49 10800 0 8001 10919 7f517cb27700 This Logger class instance [0xadae90] was initialized at 2014:12:14:20:03:49 in Process ID # 10919.
01 2014-12-14 20:03:49 10800 0 8001 10919 7f517cb27700 OS Version Info = "Kernel Name: Linux, Architecture: x86_64, Kernel Release: 3.0.76-0.11-default, Kernel Version: #1 SMP Fri Jun 14 08:21:43 UTC 2013 (ccab990), Machine HW Name: x86_64", OS Bits = 64, Application binary file spec = "/opt/novell/kanaka/engine/bin/novell-kanakaengined", Application Bits = 64, Application Version = "".
01 2014-12-14 20:03:49 10800 0 8001 10919 7f517cb27700 This is the first time that a Logger thread has been started for this class instance.
01 2014-12-14 20:03:49 10800 5 0001 10919 7f517d328700 ML: Thread has started.
01 2014-12-14 20:03:49 10800 5 0001 10919 7f517d328700 ML: Configuring the client logging subsystem [Phase I]...
01 2014-12-14 20:03:49 10800 5 0001 10919 7f517d328700 ML: Completed configuring the client logging subsystem [Phase I], bOK = 1.
01 2014-12-14 20:03:49 10800 5 0001 10919 7f517d328700 ML: Getting Operational Data [Phase I]...
01 2014-12-14 20:03:49 10800 5 0001 10919 7f517d328700 ML: Engine's instance name = "".
01 2014-12-14 20:03:49 10800 5 0001 10919 7f517d328700 ML: Engine is getting configuration path information...
01 2014-12-14 20:03:49 10800 5 0001 10919 7f517d328700 ML: Engine completed getting configuration path information, Result = 0, bOK = 1, path = "/etc/opt/novell/kanaka/engine/config".
01 2014-12-14 20:03:49 10800 5 0001 10919 7f517d328700 ML: Engine is getting program path information...
01 2014-12-14 20:03:49 10800 5 0001 10919 7f517d328700 ML: Engine completed getting program path information, bOK = 1, path = "/opt/novell/kanaka/engine/bin".
01 2014-12-14 20:03:49 10800 5 0001 10919 7f517d328700 ML: Completed getting Operational Data [Phase I], bOK = 1.
01 2014-12-14 20:03:49 10800 5 0001 10919 7f517d328700 ML: Initializing the Configuration...
01 2014-12-14 20:03:49 10800 5 0001 10919 7f517d328700 ML: Setting the reports data path...
01 2014-12-14 20:03:49 10800 5 0001 10919 7f517d328700 ML: Completed setting the reports data path, sPathSpec = "/var/opt/novell/kanaka/engine/data/reports", bOK = 1.
01 2014-12-14 20:03:49 10800 5 0001 10919 7f517d328700 ML: Setting the rtconfig reports data path...
01 2014-12-14 20:03:49 10800 5 0001 10919 7f517d328700 ML: Completed setting the rtconfig reports data path, sPathSpec = "/var/opt/novell/kanaka/engine/data/reports/rtconfig", bOK = 1.
01 2014-12-14 20:03:49 10800 5 0001 10919 7f517d328700 ML: Setting the client log data path...
01 2014-12-14 20:03:49 10800 5 0001 10919 7f517d328700 ML: Completed setting the client log data path, sPathSpec = "/var/opt/novell/kanaka/engine/log/client", bOK = 1.
01 2014-12-14 20:03:49 10800 5 0001 10919 7f517d328700 ML: Validating data path information...
01 2014-12-14 20:03:49 10800 5 0001 10919 7f517d328700 ML: Completed validating data path information, Data Path = "/var/opt/novell/kanaka/engine/data", bOK = 1.
01 2014-12-14 20:03:49 10800 5 0001 10919 7f517d328700 ML: Completed initializing the Configuration, bOK = 1.
01 2014-12-14 20:03:49 10800 5 0001 10919 7f517d328700 ML: Configuring the Logging subsystem [Phase II]...
82 2014-12-14 20:03:49 10800 0 ff04 10919 7f517cb27700 <CONFIG><LOGPATH>/var/opt/novell/kanaka/engine/log</LOGPATH></CONFIG>
82 2014-12-14 20:03:49 10800 0 ff05 10919 7f517cb27700 <CONFIG><LOGFILEBASENAME/></CONFIG>
82 2014-12-14 20:03:49 10800 0 ff05 10919 7f517cb27700 <CONFIG><LOGFILEBASENAME>novell-kanakaengined</LOGFILEBASENAME></CONFIG>
82 2014-12-14 20:03:49 10800 0 ff08 10919 7f517cb27700 <CONFIG><LEVEL>5</LEVEL><CATEGORY/></CONFIG>
82 2014-12-14 20:03:49 10800 0 ff07 10919 7f517cb27700 <CONFIG><ROLLOVERTYPE>2</ROLLOVERTYPE><FILESTORETAIN>10</FILESTORETAIN><FILESIZEMAX>10485760</FILESIZEMAX></CONFIG>
01 2014-12-14 20:03:49 10800 5 0001 10919 7f517d328700 ML: Completed configuring the Logging subsystem [Phase II], bOK = 1.
01 2014-12-14 20:03:49 10800 5 0001 10919 7f517d328700 ML: Completed configuring the client logging subsystem [Phase II], bOK = 1.
01 2014-12-14 20:03:49 10800 5 0001 10919 7f517d328700 ML: Getting Operational Data [Phase II]...
01 2014-12-14 20:03:49 10800 5 0001 10919 7f517d328700 ML: Setting the XML Message Signature object...
01 2014-12-14 20:03:49 10800 5 0001 10919 7f517d328700 ML: Completed setting the XML Message Signature object, bOK = 1.
01 2014-12-14 20:03:49 10800 5 0001 10919 7f517d328700 ML: Setting the SSL/TLS certificate file...
01 2014-12-14 20:03:49 10800 5 0001 10919 7f517d328700 ML: Completed setting the SSL/TLS certificate file, sFileSpec = "/etc/opt/novell/kanaka/engine/config/server.pem", bOK = 1.
01 2014-12-14 20:03:49 10800 5 0001 10919 7f517d328700 ML: Setting the storage resources file...
01 2014-12-14 20:03:49 10800 5 0001 10919 7f517d328700 ML: Completed setting the storge resources file, sFileSpec = "/var/opt/novell/kanaka/engine/data/storage-resources.dat", bOK = 1.
01 2014-12-14 20:03:49 10800 5 0001 10919 7f517d328700 ML: Setting the user index file...
01 2014-12-14 20:03:49 10800 5 0001 10919 7f517d328700 ML: Completed setting the user index file, sFileSpec = "/var/opt/novell/kanaka/engine/data/userindex.dat", bOK = 1.
01 2014-12-14 20:03:49 10800 5 0001 10919 7f517d328700 ML: Setting the client list file...
01 2014-12-14 20:03:49 10800 5 0001 10919 7f517d328700 ML: Completed setting the client list file, sFileSpec = "/var/opt/novell/kanaka/engine/data/clients.dat", bOK = 1.
01 2014-12-14 20:03:49 10800 5 0001 10919 7f517d328700 ML: Engine is determining its own DNS host name...
01 2014-12-14 20:03:49 10800 5 0001 10919 7f517d328700 ML: Engine completed determining its own DNS host name, Result = 0, bOK = 1, Name = "kanakasrvkaia".
01 2014-12-14 20:03:49 10800 5 0001 10919 7f517d328700 ML: Engine completed determining its own DNS host name, Result = 0, bOK = 1, Name = "kanakasrvkaia".
01 2014-12-14 20:03:49 10800 5 0001 10919 7f517d328700 ML: Engine is getting O.S. version information...
01 2014-12-14 20:03:49 10800 5 0001 10919 7f517d328700 ML: Engine completed getting O.S. version information, Result = 0, bOK = 1.
01 2014-12-14 20:03:49 10800 5 0001 10919 7f517d328700 ML: Engine is getting file version information for itself ["/opt/novell/kanaka/engine/bin/novell-kanakaengined"]...
01 2014-12-14 20:03:49 10800 5 0001 10919 7f517d328700 ML: Engine completed getting file version information for itself ["/opt/novell/kanaka/engine/bin/novell-kanakaengined"], Version = "2.7.1.8", Result = 0, bOK = 1.
01 2014-12-14 20:03:49 10800 5 0001 10919 7f517d328700 ML: Completed getting Operational Data [Phase II], bOK = 1.
01 2014-12-14 20:03:49 10800 5 0001 10919 7f517d328700 ML: Getting Operational Data [Phase III]...
01 2014-12-14 20:03:51 10800 5 0001 10919 7f517d328700 ML: Engine is finished preparing DS Context, eDir Tree Name = "KTREE", Result = 0, bOK = 1.
01 2014-12-14 20:03:51 10800 5 0001 10919 7f517d328700 ML: Completed getting Operational Data [Phase III], bOK = 1.
01 2014-12-14 20:03:51 10800 5 0001 10919 7f517d328700 ML: Configuring the Novell XPLAT environment to perform logging...
01 2014-12-14 20:03:51 10800 5 0001 10919 7f517d328700 ML: Completed configuring the Novell XPLAT environment to perform logging, bOK = 1.
01 2014-12-14 20:03:51 10800 5 0001 10919 7f517d328700 ML: Initializing the HTTPx Server subsystem...
01 2014-12-14 20:03:51 10800 5 0001 10919 7f517d328700 ML: Completed initializing the HTTPx Server subsystem, bOK = 1.
82 2014-12-14 20:03:51 10800 0 ff08 10919 7f517cb27700 <CONFIG><LEVEL>5</LEVEL><CATEGORY/></CONFIG>
82 2014-12-14 20:03:51 10800 0 ff09 10919 7f517cb27700 <CONFIG><LEVEL>5</LEVEL><CATEGORY/></CONFIG>
01 2014-12-14 20:03:51 10800 5 0001 10919 7f517d328700 ML: Loading saved state information...
01 2014-12-14 20:03:51 10800 5 0001 10919 7f517d328700 ML: Loading the Salt state information...
01 2014-12-14 20:03:51 10800 5 0001 10919 7f517d328700 ML: Loaded the Salt state information, bOK = 1.
01 2014-12-14 20:03:51 10800 5 0001 10919 7f517d328700 ML: Completed loading state information, bOK = 1.
01 2014-12-14 20:03:51 10800 5 0001 10919 7f517d328700 ML: Successfully authenticated as the Proxy Account.
01 2014-12-14 20:03:51 10800 5 0003 10919 7f517d328700 GL: Base schema appears to be properly extended.
01 2014-12-14 20:03:51 10800 5 0003 10919 7f517d328700 GL: Collaborative Homedirectory attribute ccx-FSFManagedPath is available.
01 2014-12-14 20:03:51 10800 5 0003 10919 7f517d328700 GL: Kanaka AFP Volume name attribute cccKanakaAFPVolumeName is available.
01 2014-12-14 20:03:51 10800 5 0001 10919 7f517d328700 ML: Attempted validate accounts, Result = 0.
01 2014-12-14 20:03:51 10800 5 0001 10919 7f517d328700 ML: Successfully authenticated as the Proxy Account.
01 2014-12-14 20:03:51 10800 5 0001 10919 7f517d328700 ML: Attempted to Generate new SALT and Proxy Password, Result = 0.
01 2014-12-14 20:03:51 10800 5 0001 10919 7f517d328700 ML: Called LoadStorageResourcesFromCache(), Result = 0.
01 2014-12-14 20:03:51 10800 5 0001 10919 7f517d328700 ML: Called LoadClientManager(), Result = 0.
01 2014-12-14 20:03:51 10800 3 0001 10919 7f517d328700 ML: Called LoadMountPointManager(), Result = 53.
01 2014-12-14 20:03:51 10800 5 0001 10919 7f517d328700 ML: Called LoadIndexManager(), Result = 0.
01 2014-12-14 20:03:51 10800 5 0007 10919 7f517d328700 Index Manager: Starting Scheduler Thread...
01 2014-12-14 20:03:51 10800 5 0001 10919 7f517d328700 ML: Called IndexManager::StartIndexingScheduler(), Result = 0.
01 2014-12-14 20:03:51 10800 5 0007 10919 7f517991c700 Index Manager [ST]: Next User Index Rebuild will happen in 14169 seconds.
01 2014-12-14 20:03:51 10800 5 0001 10919 7f517d328700 ML: Called LoadKanakaPolicy(), Result = 0.
01 2014-12-14 20:03:51 10800 5 0001 10919 7f517d328700 ML: Starting the HTTPx Server subsystem...
01 2014-12-14 20:03:51 10800 5 0001 10919 7f517d328700 ML: Completed starting the HTTPx Server subsystem, bResult = 1.
01 2014-12-14 20:03:51 10800 5 0001 10919 7f517d328700 ML: Completed initialization. Engine is now running.
01 2014-12-14 20:03:51 10800 5 0001 10919 7f517d328700 WD: Engine mainline thread is entering the Watch Dog function...
01 2014-12-14 20:03:51 10800 5 0001 10919 7f517d328700 WD: Engine is running...
01 2014-12-14 20:04:50 10800 5 0004 10919 7f5172c9f700 UI: admin.kaia [192.168.1.180] LOGIN SUCCESS -
OES2sp2 miggui Failed to mount volume
Trying to migrate NW65SP8 (DS8.8.4) to OES2sp2.
miggui is running on the OES2sp2 server which is patched up to date using rug.
Source and target servers are in the came container in the DS.
I can define the source and target servers and get to the point where I want to configure the migration of volumes, but then I get a failure. The log (minus the timestamps for clarity) reads:
ERROR - FILESYSTEM:volmount.rb:Command to mount source: ruby /opt/novell/migration/sbin/volmount.rb -s 138.37.100.118 -a "cn=joshua,ou=sys,o=qmw" -c cp437 -f "/var/opt/novell/migration/cc18/fs/mnt/source" -m -t NW65
INFO - FILESYSTEM:volmount.rb:*****************Command output start**********************************
INFO - FILESYSTEM:volmount.rb:
INFO - FILESYSTEM:volmount.rb:Information: ncpmount using code page 437
INFO - FILESYSTEM:volmount.rb:Information: ncpshell command executed as: LC_ALL=en_US.UTF-8 /opt/novell/ncpserv/sbin/ncpshell --volumes --ip=138.37.100.118 --u="joshua.sys.qmw"
INFO - FILESYSTEM:volmount.rb:Information: Mounting Volume = _ADMIN
INFO - FILESYSTEM:volmount.rb:Information: Executing command: /opt/novell/ncl/bin/nwmap -s 138.37.100.118 -d /var/opt/novell/migration/cc18/fs/mnt/source/_ADMIN -v _ADMIN
INFO - FILESYSTEM:volmount.rb:Fatal: Failed to mount volume _ADMIN for server 138.37.100.118
INFO - FILESYSTEM:volmount.rb:Fatal: SystemCallError, Unknown error 1008 - Failed to mount volume _ADMIN for server 138.37.100.118 .
I tried executing what appears to be the offending command by hand:
ruby /opt/novell/migration/sbin/volmount.rb -s 138.37.100.118 -a "cn=joshua,ou=sys,o=qmw" -c cp437 -f "K" -m -t NW65 -p password --debug
which produces the output:
Information: ncpmount using code page 437
Information: ncpshell command executed as: LC_ALL=en_US.UTF-8 /opt/novell/ncpserv/sbin/ncpshell --volumes --ip=138.37.100.118 --u="joshua.sys.qmw"
Information: Mounting Volume = _ADMIN
Information: Executing command: /opt/novell/ncl/bin/nwmap -s 138.37.100.118 -d K/_ADMIN -v _ADMIN
Fatal: Failed to mount volume _ADMIN for server 138.37.100.118
Fatal: SystemCallError, Unknown error 1008 - Failed to mount volume _ADMIN for server 138.37.100.118 .
Information: File K/_ADMIN/Novell/Cluster/PoolConfig.xml does not exist. No cluster resources attached
Information: Mounting Volume = SYS
Information: Executing command: /opt/novell/ncl/bin/nwmap -s 138.37.100.118 -d K/SYS -v SYS
Fatal: Failed to mount volume SYS for server 138.37.100.118
Information: unmounting all mounted volumes
Information: Executing command:/opt/novell/ncl/bin/nwlogout -f -s QMWCC18
Cannot perform logout: Cannot connect to server:[QMWCC18]. Error:NWCCOpenConnByName:
Information: Command Output:
Information: Executing command: rm K/*
rm: cannot remove `K/*': No such file or directory
Fatal: SystemCallError, Unknown error 1008 - Failed to mount volume SYS for server 138.37.100.118 .
SLP shows both servers, they are on the same network as each other, and the firewall is turned off.
Does anyone have any idea what may be causing the mount failure or what error 1008 might be?
Timcgaa183 wrote:
> Thankyou all for helpful suggestions, I'll go through them.
>
> 1. novfsd
> /etc/rc.d/novfsd status
>
> running
>
> /etc/rc.d/novfsd restart
> Stopping Novell novfs daemon...
>
> done
> Starting Novell novfs daemon...
>
> No Config File Found - Using Defaults
> novfsd: Novell Client for Linux Daemon
> Copyright 1992-2005, by Novell, Inc. All rights reserved.
> Version 3.0.1-503
>
> done
>
> Nothing changes, so I don't think that was the problem in this case.
>
did you restart the server after installing OES2 SP2?
> 2. try using migfiles
> /opt/novell/migration/sbin/migfiles -s 138.37.100.118 -v APPS -V APPS
>
> The result:
> Error:
> Error: nbackup: Unable to retrieve the Target Service Name list from
> 138.37.100.118
> Error:
> Fatal: nbackup command failed to execute: nbackup: Connection denied
>
migfiles is not able to connect to the TSA on the source server. Either
TSAFS is not loaded on the source server or not able to locate the TSA
using SLP.
> This might be informative to someone who knows a little more than me. I
> wonder if I can call it with options to get more information. I have
> just re-checked I can attach and mount volumes with the same username
> from another system.
>
> 3. ruby version
>
> rpm -qa |grep ruby
> ruby-1.8.4-17.20
> rubygems-0.9.2-4.4
> rubygem-needle-1.3.0-1.5
> rubygem-net-sftp-1.1.0-1.5
> ruby-devel-1.8.4-17.20
> rubygem-net-ssh-1.0.9-1.5
>
> Doesn't appear to be an afflicted version and migfiles --help tells
> me all about the options available.
>
>
> As #2 looked interesting I thought I'd look at it a bit more. I turned
> up TID 7001767. The reason migfiles failed for me was that SMDR and
> TSAFS weren't loaded, at least I don't get the error and file migration
> appears to start now they are loaded, though it does appear to have
> ceased copying files rather prematurely....
>
> Going back to volmount.rb I now realise its using ncpfs, and not a
> lightweight Novell client. So I tried mounting a volume by hand:
>
> qmwcc28:~ # ncpmount -S 138.37.100.118 -U joshua.sys.qmw K
> Logging into 138.37.100.118 as JOSHUA.SYS.QMW
> Password:
> ncpmount: Server not found (0x8847) when trying to find 138.37.100.118
>
> A bit of a giveaway, but why doesn't it work?
> It seems I need to use -A DNSname -S servername and then it works.
> The next important bit seems to be
> /opt/novell/ncpserv/sbin/ncpshell --volumes --ip=138.37.100.118
> --u="joshua.sys.qmw"
> which executed by hand lists volumes correctly with the output:
> Please enter your password ?
> [0] SYS
> [1] _ADMIN
> [2] APPS
> 3 NCP Volumes Mounted
>
> "ncpshell" appears to be from Novell's client for Linux so I don't
> understand why we'd be trying to use that if we're using ncpfs, and we
> already know which volumes are mounted by looking in the folder in which
> we mounted the server using ncpfs. AFAICS is used to invoke NLMs on
> NetWare remotely using OES so its not testing anything we don't already
> know.
>
> This takes me inevitably to "nwmap". "nwmap" is also from Novell's
> client for Linux so maybe the ncpfs stuff is unnecessary.
> /opt/novell/ncl/bin/nwmap -s 138.37.100.118 -d sys -v SYS
> produces:
> map: server not Found:138.37.100.118 - drive sys not mapped
>
ncpmount uses udp as the default. Add the option -o tcp to the ncpmount
command then mount should work.
> nwmap doesn't ask for a username. Maybe I'm wrong, but as far as the
> Novell client goes I don't think it can have attached or logged into the
> source server (ncpfs having a different connection table and ncpshell
> asking the remote server to return the answer). I can't actually see
> where /volmount.rb is calling nwmap at the moment but the results I get
> my calling it at the command prompt with the same options given in the
> log are the same.
>
if there is an existing connection to the same tree, nwmap does not ask
for user name. Use the command "nwconnections" to check the existing
connections. Use nwlogout to logout the connection. check
/var/opt/novell/nclmnt/root/ for any stale entries.
> I've tried logging in using nwlogin, but that fails too saying:
> Cannot perform login: The system could not log you into the network.
> Make sure that the name and connection information are correct, then
> type your password again.
>
> ncl_scanner -T does list NDS trees but I suspect its only querying an
> SLP server and nothing more useful. ncl_scanner -S produces:
> INFORMATION FOR SERVER [QMWCC18] :
> Server Name : [QMWCC18]
> Bindery : [FALSE]
> eDirectory Context : []
> should it show a context?
>
> Looking at the files of the Novell client on the system, it looks a
> rather cut down set with no config files. Even having introduced
> protocol.conf the situation is not improved, but I'm now sure the
> problem lies in this area. Possibly a full client installation is
> required, or maybe there is something else wrong which is preventing the
> client from working correctly. namcd is looking suspect.
>
>
You do not need all files for Novel Client. If you want
You can logout all connections using the command "nwlogout -a" and try
the nwmap command again.
"/opt/novell/ncl/bin/nwmap -s 138.37.100.118 -d
/var/opt/novell/migration/cc18/fs/mnt/source/SYS -v SYS"
Looks like the novell client is failed to resolve the IP address. You
can do the following to configure different name resolution methods in
the following way:
Create a file: /etc/opt/novell/ncl/protocol.conf with data.
Name_Resolution_Providers=NCP,SLP,DNS
then restart rcnovfsd deamon using the command "rcnovfsd restart"
do you see any NCP errors in the network packet trace?
regards
Praveen -
Cannot mount volume - device offline
Hi everyone,
I am trying to setup OSB on a Linux box (CentOS).
I could configure the tape library and tape drives as explained in the installation/admin guide but could not get the tape volume mounted. It keeps giving the errors:
can't mount volume in tape1 - device offline
It seems that the volume is offline. How can we get it online?
The error log for the tape drive shows:
Oracle Secure Backup hardware error log for "tape1", version 1
QUANTUM DLT-S4, prom/firmware id 1414, serial number 236ER89482
Tue May 13, 2008 at 22:05:23.748 (IST) devtype: 15
obrobotd: core-ora:/dev/sg2, args to wst__exec: handle=0x1
accessed via host core-ora: Linux 2.6.9-42.ELsmp #1 SMP Tue Aug 15 10:35:26 BST 2006
op=18 (log_sense), buf=0x54b0b00, count=44 (0x2c), parm=0x3e0
cdb: 4D 00 3E 00 00 00 00 00 2C 00 log_sense, cnt=44, pc=0, page_code=0x3e
sense data:
70 00 05 00 00 00 00 18 00 00 00 00 24 00 00 00
00 00 00 00 00 00 00 00 00 00 00 48 00 00 00 00
ec=0, sk=ill req, asc=24, ascq=0
error is: illegal request
flags: (none)
returned status: code=illegal request,
resid=0 (0x0), checks=0x0 []
obtool user admin password oracle
ob> lsdev -lvg
lib1:
Device type: library
Model: [none]
Serial number: [none]
In service: yes
Debug mode: no
Barcode reader: yes
Barcodes required: yes
Auto clean: no
Clean interval: (not set)
Clean using emptiest: yes
Unload required: yes
Ejection type: auto
Min writable volumes: 0
UUID: 9ac064fe-01fb-102b-8a2e-0015175b4124
Attachment 1:
Host: core-ora
Raw device: /dev/sg1
Connection type: SCSI
Inquiry data:
Vendor: ADIC
Product: Scalar 24
Firmware: 0402
Serial number: ADICJaya
Element counts / addresses:
1 mte: 1
2 se : 4096 - 4097
0 iee
1 dte: 256
Moves:
From mte, to: mte 0 se 1 iee 0 dte 0
From se, to: mte 0 se 1 iee 0 dte 1
From iee, to: mte 0 se 0 iee 0 dte 0
From dte, to: mte 0 se 1 iee 0 dte 1
Ok_ops: move=1, reserve=1 sense_dev=1, sense_ele=1, unload_any=1, sense_dev_range=1
Device characteristics: two_d=0, is_120=0, fake_mte=0, fake_iee=0, one_target=0
State of barcode reader: present
Display: none
Dte 1: target * lun * name tape1 (raw device name /dev/sg2)
Warning: bus info unknown or drive not installed
tape1:
Device type: tape
Model: [none]
Serial number: [none]
In service: yes
Library: lib1
DTE: 1
Automount: yes
Error rate: 8
Query frequency: 1024KB (1048576 bytes) (from driver)
Debug mode: no
Blocking factor: (default)
Max blocking factor: (default)
Current tape: 1
Use list: all
Drive usage: none
Cleaning required: no
UUID: 371b7330-ffe9-102a-8a2e-0015175b4124
Attachment 1:
Host: core-ora
Raw device: /dev/sg2
Connection type: SCSI
Inquiry data:
Vendor: QUANTUM
Product: DLT-S4
Firmware: 1414
Serial number: 236ER89482
Tape state: online
Hardware compression: on
Last read was: uncompressed
Maximum block size: 1048576
Remaining tape: 73728 (uncompressed) blocks (75.50MB
Looking for comments/suggestions.
Thanks!I created a file system backup job. The backup job is pending with the status "pending resource availability".
ob> lsjob all long
7:
Type: dataset Dataset1
Level: full
Family: MediaFamily1
Encryption: off
Scheduled time: 05/15.14:00
State: processed; host backup(s) scheduled
Priority: 0
Privileged op: no
Run on host: (administrative server)
Attempts: 1
7.1:
Type: backup core-ora
Level: full
Family: MediaFamily1
Encryption: off
Scheduled time: 05/15.14:00
State: pending resource availability
Priority: 0
Privileged op: no
Run on host: core-ora
Attempts: 0
ob> catxcr --level 0 7
Error: unable to open transcript for 7 - No such file or directory
Error: unable to open transcript for 7.1 - No such file or directory
I also tried to do some operations on the tape device (load, identify, import… ) but the commands take forever to finish and return with errors.
ob> lsvol library lib1 long
Inventory of library lib1:
in mte: vacant
in 1: barcode JK1112, oid 100
in 2: barcode JK1111, oid 101
in 3: barcode JK1113, oid 102
in 4: vacant
in 5: vacant
in dte: vacant
ob> loadvol drive tape1 mount write force 1 > (took around 10 mins to return)
Error: can't execute command - drive didn't come online; check configuration/hardware
I could see that the drive loaded into the tape immediately after issuing the command (from the Dxi GUI) but the loadvol command returned after a long time.
The log file for the obrobotd when the above command was issued shows:
[root@core-ora lib1]# pwd
/usr/local/oracle/backup/admin/log/device/lib1
[root@core-ora lib1]# tail -f obrobotd
2008/05/15.14:53:05 ***0 wst__dev_state...
2008/05/15.14:53:05 ***0 wst__exec: op=0 (nop), buf=0x0, count=1 (0x1), parm=0x0
2008/05/15.14:53:05 ioctl_op=0x3, to=300, datalen=0x0, buf=0x0, cdb: 00 00 00 00 00 00 tur
2008/05/15.14:53:05 ***0 wst__exec: rval=0, status.code/resid/checks=0x0/0x0/0x0
2008/05/15.14:53:05 ***0 wst__dev_state: no sense, status 0x0
2008/05/15.14:53:05 ***0 wst__exec: op=2 (sense), buf=0x54a970, count=32 (0x20), parm=0x0
2008/05/15.14:53:05 ioctl_op=0x5, to=30, datalen=0x20, buf=0x54a970, cdb: 03 00 00 00 20 00 sense, cnt=32
2008/05/15.14:53:05 ***0 wst__exec: rval=0, status.code/resid/checks=0x0/0x0/0x0
2008/05/15.14:53:05 ***0 wst__get_sense(int) cmd = 0, sense data:
2008/05/15.14:53:05 70 00 00 00 00 00 00 18 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 0C 00 80 00 00 00 00
ec=0, sk=no sense, asc=0, ascq=0, rem=0x30020000 (805437440)
flags: (none)
2008/05/15.14:53:05 ***0 wst__exec: op=7 (readpos), buf=0x7fbfffe1d0, count=20 (0x14), parm=0x0
2008/05/15.14:53:05 ioctl_op=0x5, to=180, datalen=0x14, buf=0x54aa78, cdb: 34 00 00 00 00 00 00 00 00 00 read_pos
2008/05/15.14:53:05 ***0 wst__exec, raw position: B0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00
2008/05/15.14:53:05 ***0 wst__exec: rval=0, status.code/resid/checks=0x0/0x10/0x0
2008/05/15.14:53:05 ***0 wst__exec: op=18 (log_sense), buf=0x54a9f0, count=44 (0x2c), parm=0x3e
2008/05/15.14:53:05 ioctl_op=0x5, to=180, datalen=0x2c, buf=0x54a9f0, cdb: 4D 00 3E 00 00 00 00 00 2C 00 log_sense, cnt=44, pc=0, page_code=0x3e
2008/05/15.14:53:05 ***0 wst__exec: op=2 (sense), buf=0x54a970, count=32 (0x20), parm=0x0
2008/05/15.14:53:05 ioctl_op=0x5, to=30, datalen=0x20, buf=0x54a970, cdb: 03 00 00 00 20 00 sense, cnt=32
2008/05/15.14:53:05 ***0 wst__exec: rval=0, status.code/resid/checks=0x0/0x0/0x0
2008/05/15.14:53:05 ***0 wst__get_sense(int) cmd = 4D, sense data:
2008/05/15.14:53:05 70 00 05 00 00 00 00 18 00 00 00 00 24 00 00 00
00 00 00 00 00 00 00 00 00 0C 00 80 00 00 00 00
ec=0, sk=ill req, asc=24, ascq=0, rem=0x30020000 (805437440)
error is: illegal request (OB scsi device driver)
flags: (none)
2008/05/15.14:53:05 ***0 wst__exec: rval=-1, status.code/resid/checks=0x20008113/0x0/0x0
2008/05/15.14:53:05 ***0 wst__dev_state: state=0x1 (online, not at bot)
2008/05/15.14:53:05 ***0 wst__wait: from dev_state: state=0x1, code=0x0
Thanks! -
Delete File From Mounted Volume
Hey,
I am trying to delete the "Calendar Cache" files on both my laptop PowerBook G4 and the Mac Pro Quad that I sync my calendars with. I am using ChronoSync and the individual calendars sync fine, but there is a little house keeping needed with the cache file. They need to be deleted on both systems in order to "refresh" the views of the calendars.
So after the sync of calendars, I have the software initiating an AppleScript that deletes both. Here's the script:
+(* PowerBook Files / delete cache file *)+
+(* Please note that both systems have the same username. This may be arise a conflict *)+
+tell application "Finder"+
+ activate+
+ tell application "Finder" to delete file "Calendar Cache" of folder "Calendars" of folder "Library" of disk "useranthony"+
+end tell+
+(* Mac Pro Quad/ delete cache file *)+
+tell application "Finder"+
+ mount volume "afp://10.10.10.1/anthonyabraira"+
+ tell application "Finder" to delete file "Calendar Cache" of folder "Calendars" of folder "Library" of disk "/volumes/useranthony"+
+end tell+
I am having trouble addressing a deletion on the networked Mac Pro Quad.why send it to the trash just delete it...
(* PowerBook Files / delete cache file )
try
do shell script "rm -rf /Library/Calendars/Calendar\\ Cache"
end try
you may need a delay for the Mac Pro Quad to mount
( Mac Pro Quad/ delete cache file *)
--the mount and then the delay
delay 4
try
do shell script "rm -rf /THE-CORRECT/PATH-HERE/Library/Calendars/Calendar\\ Cache"
end try
Tom -
Unable to mount SD cards - SCSI disks
I have a generic, cheap, all in one usb card reader and am unable to mount sd cards on my system. I tried a few days back with a friends similar sort of card reader with the same outcome. I've got 3 sd cards to hand, one brand new, all of which seem to work fine on my Canon DSLR camera.
Some info:
dmesg | tail
[ 3.070959] scsi 6:0:0:0: Direct-Access Generic Mass-Storage 1.11 PQ: 0 ANSI: 2
[ 3.335877] sd 6:0:0:0: [sdd] Attached SCSI removable disk
[ 4.908578] r8169 0000:02:00.0 enp2s0: link up
[ 4.908586] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[ 652.025211] usb 3-7: USB disconnect, device number 2
[ 657.544035] usb 3-8: new high-speed USB device number 5 using xhci_hcd
[ 657.718030] usb-storage 3-8:1.0: USB Mass Storage device detected
[ 657.718092] scsi host7: usb-storage 3-8:1.0
[ 658.721486] scsi 7:0:0:0: Direct-Access Generic Mass-Storage 1.11 PQ: 0 ANSI: 2
[ 658.986353] sd 7:0:0:0: [sdd] Attached SCSI removable disk
sudo fdisk -l /dev/sdd
fdisk: cannot open /dev/sdd: No medium found
After a few reboots I installed some tools in the official repos with scsi in the description in the hope something might happen:
pacman -Qs scsi
local/lsscsi 0.27-1
A tool that lists devices connected via SCSI and its transports
local/sdparm 1.08-1
An utility similar to hdparm but for SCSI devices
local/sg3_utils 1.39-1
Generic SCSI utilities
local/smartmontools 6.3-1
Control and monitor S.M.A.R.T. enabled ATA and SCSI Hard Drives
local/vhba-module 20140629-9
Kernel module that emulates SCSI devices
sudo hdparm /dev/sdd
/dev/sdd:
SG_IO: bad/missing sense data, sb[]: 70 00 05 00 00 00 00 0a 00 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
multcount = 0 (off)
readonly = 0 (off)
readahead = 256 (on)
geometry = 1024/0/62, sectors = 0, start = 0
sudo hdparm -z /dev/sdd
/dev/sdd:
re-reading partition table
sudo sdparm /dev/sdd
/dev/sdd: Generic Mass-Storage 1.11
lsusb -v | grep sdd
Couldn't open device, some information will be missing
lsusb -v
Bus 002 Device 002: ID 8087:8000 Intel Corp.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 1 Single TT
bMaxPacketSize0 64
idVendor 0x8087 Intel Corp.
idProduct 0x8000
bcdDevice 0.04
iManufacturer 0
iProduct 0
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 12
Hub Descriptor:
bLength 11
bDescriptorType 41
nNbrPorts 8
wHubCharacteristic 0x0009
Per-port power switching
Per-port overcurrent protection
TT think time 8 FS bits
bPwrOn2PwrGood 0 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00 0x00
PortPwrCtrlMask 0xff 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Port 5: 0000.0100 power
Port 6: 0000.0100 power
Port 7: 0000.0100 power
Port 8: 0000.0100 power
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0001
Self Powered
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 3.17
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Bus 001 Device 002: ID 8087:8008 Intel Corp.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 1 Single TT
bMaxPacketSize0 64
idVendor 0x8087 Intel Corp.
idProduct 0x8008
bcdDevice 0.04
iManufacturer 0
iProduct 0
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 6
wHubCharacteristic 0x0009
Per-port power switching
Per-port overcurrent protection
TT think time 8 FS bits
bPwrOn2PwrGood 0 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Port 5: 0000.0100 power
Port 6: 0000.0100 power
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0001
Self Powered
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 3.17
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 3.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 3
bMaxPacketSize0 9
idVendor 0x1d6b Linux Foundation
idProduct 0x0003 3.0 root hub
bcdDevice 3.17
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 31
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
bMaxBurst 0
Bus 003 Device 003: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x093a Pixart Imaging, Inc.
idProduct 0x2510 Optical Mouse
bcdDevice 1.00
iManufacturer 1
iProduct 2
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 34
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 2 Mouse
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.11
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 52
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 10
Bus 003 Device 005: ID 1908:0226 GEMBIRD
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x1908 GEMBIRD
idProduct 0x0226
bcdDevice 1.11
iManufacturer 0
iProduct 0
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 150mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk-Only
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Bus 003 Device 004: ID 045e:0750 Microsoft Corp. Wired Keyboard 600
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x045e Microsoft Corp.
idProduct 0x0750 Wired Keyboard 600
bcdDevice 1.10
iManufacturer 1
iProduct 2
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 59
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 1 Keyboard
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.11
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 65
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 10
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 0 No Subclass
bInterfaceProtocol 0 None
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.11
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 106
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 10
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 1 Single TT
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 3.17
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
uname -r
3.17.1-1-ARCH
Any ideas?
Last edited by Proinsias (2014-10-25 23:15:08)Try udev. Is your reader OK? Is the card recongized - does it show in dmesg?
http://wiki.archlinux.org/index.php/USB_Storage_Devices
You should familiarize yourself with the wiki
http://wiki.archlinux.org/index.php/Asus_Eee_PC_701
http://wiki.archlinux.org/index.php/Asu … /xorg.conf
Last edited by karol (2010-07-09 14:02:36) -
Secured WebDAV Mounted Volume Authorization Issues
I use a secure WebDAV mounted volume from myDisk.se and up until the latest Security Update have had zero issues being able to manipulate files and folders as I would on a normal volume. However, since the installation of the Security Update (2009-004 (PowerPC) 1.0) I find weird things happening with this mounted volume:
1) I am able to mount the secured WebDAV share using my security credentials.
2) I can create a default "untitled" folder but when I try to change its name, the WebDAV authorization dialog pops up and despite entering the same credentials (why, I am not sure as the volume has already been properly credentialed in order to be mounted), access is denied.
3) Trying to create a file within a folder on the mounted WebDAV volume I previously created pre-update causes the same authorization issue.
I have no other WebDAV shares I can try to mount from any other companies so I am not sure if this is a myDisk issue or one borne from the Security Update. I am not a .Mac/MobileMe user and that info is not filled out in System Preferences. The internal hard drive has been meticulously maintained with Disk and Permissions repair being run both before and after each and every software update installed. Likewise, the volume's structure is also checked both before and after and shows no need for repairs.
Any ideas? Perhaps there is a corrupted file somewhere that's affecting the authorizations needed by this third-party WebDAV volume?
The machine that has this problem is the last model iBook G4/1.33GHz 12" display, 1.5GB RAM, and a 100GB 5400rpm HD which replaced the stock OEM 40GB 4200rpm drive about one year ago.
I'm not willing to do an Archive and Install at this point as the loss of the WebDAV access to my online volume is not critical. Inconvenient as heck but not to the point where I'm willing (or able) stop my normal work to spend the hours it will take to get WebDAV access back.
Thanks in advance for any insights.same problem here with webdav, I can't mount my idisk from university network on Mac Pro 10.5.3 (although it mounts fine from home network on both ibook and PMG5 10.5.3). Everything was fine with 10.5.2 and I already re-installed 10.5.3 combo. Other bugs as well with .Mac prefs (keeps crashing, sometimes it shows the available space on idisk but still no mounting, with error -35 or -8086), but .Mac sync is OK
Jun 11 12:34:21 webdavfs_agent[579]: mounting as authenticated user
Jun 11 12:34:22 kernel[0]: webdav server: http://idisk.mac.com/[username]/: connection is dead
Jun 11 12:34:22 KernelEventAgent[75]: tid 00000000 received VQ_DEAD event (32)
Jun 11 12:34:22 kernel[0]: webdav_sendmsg: sock_connect() = 61
Jun 11 12:34:22 KernelEventAgent[75]: tid 00000000 type 'webdav', mounted on '/Volumes/[username]', from 'http://idisk.mac.com/[username]/', dead
Jun 11 12:34:22 kernel[0]: webdav_sendmsg: sock_connect() = 61
Jun 11 12:34:22 KernelEventAgent[75]: tid 00000000 found 1 filesystem(s) with problem(s)
Jun 11 12:34:22 kernel[0]: webdav_sendmsg: sock_connect() = 61
Jun 11 12:34:52: --- last message repeated 1 time --- -
Change ownership from "system" on mounted volume?
I have an external firewire drive with 3 partitions all of which are mounted on an iMac, and which until recently all had the same ownership and permission settings under my admin account. One of the volumes (the one storing all the users' iTunes songs) somehow changed ownership to "system" and group to "wheel". I can no longer access the volume nor can the other user accounts on the iMac, although it shows up as a mounted volume when viewed in Disk Utility. "Repair permissions" is unavailable for this volume in Disk Utility. The other two volumes are unaffected and retain the original ownership settings. I'd like to reset ownership from "system" to my admin account, but do not know how to do so as apparently it needs to be done through unix commands using Terminal. What do I need to do?
iMac Mac OS X (10.4.8)"...under Ownership & Permissions, click on the lock, enter your password, and change the Owner to you, with R&W access and the Group to admin, also w/R&W access, and click o Apply to enclosed items. Click the lock and close the Info window. No need to use Unix commands in the Terminal app."
I first tried that approach but unfortunately the procedure does not work. Under Ownership & Permissions it says "You have No Access". I can click on the lock and select my name under Details: Owner, but once I click to relock, Owner just reverts back to "system". -
Recently got a new mac with the OS X 10.7 and the finder search doesn't work on mounted volumes.
It searches the mac HD fine.
Any ideas?Did you follow my earlier suggestion:
You can also use Spotlight, but check in Spotlight prefs to make sure none of your disks are excluded (beware that not excluding your disks could take Spotlight a while to index after a reboot...)
System Prefs > Spotlight > Privacy
If the list is empty, then all your drives are included.
That dialogue should look like this (i.e., there should be nothing in the blue/white listing pane):
BTW, if you are new to Mac, be sure to read this:
http://support.apple.com/kb/HT3737 -
Hi all
Im putting this script together using AS Studio, the script mounts a volume then goes to a specific folder checks to see if their are files in it that are less than 24 hours old then duplicates them to another folder then unmounts the volume.
I cant seem to get the files in the folder "Abf:untitled folder:" which are less than 24 hours old to duplicate to folder "Abf:untitled folder 2:", can I get some pointers as to where im going wrong please?
on clicked theObject
if name of theObject is "get" then
tell window "main"
set Comp_Name to name of current menu item of popup button "COMP"
set current menu item of popup button "COMP" to first menu item of popup button "COMP"
end tell
if (Comp_Name is "ABf") then
set aDayAgo to the (current date) - 1 * days
tell application "Finder"
set myVolume to mount volume "afp://APf:[email protected]/APf"
delay 5
get every file of alias "Abf:untitled folder:"
repeat with thisItem in the result
if the modification date of thisItem comes after aDayAgo then
try
tell application "Finder" to duplicate thisItem to "Abf:untitled folder 2:"
end try
end if
end repeat
delay 5
tell application "Finder" to eject "Abf:"
end tell
end if
end if
end clicked
Cheers
BudgieIm stumped, and a bit lost, due to my nievity with AS, ive got as far as the below and tried numerous things, but I keep getting the same result.
AppleScript Error.
"Finder got an error: Can't get every file of "/Volumes/Absolute Proof/untitled folder/". (-1728)"
am Im missing the obvious?, or am I a bit thick? (be kind)
could I get a bit of help with sorting this please?
on clicked theObject
if name of theObject is "get" then
tell window "main"
set Comp_Name to name of current menu item of popup button "COMP"
set current menu item of popup button "COMP" to first menu item of popup button "COMP"
end tell
if (Comp_Name is "AB-Proof") then
mount volume "afp://HD:[email protected]/AP"
delay 5
set aDayAgo to the (current date) - 1 * days
tell application "Finder"
--update folder "AP:untitled folder:"
run script "Tell app \"finder\" to get every file of POSIX path of alias \"AP:untitled folder:\" "
repeat with thisItem in the result
if the modification date of thisItem comes after aDayAgo then
duplicate thisItem to "AP:untitled folder 2:"
end if
end repeat
end tell
end if
end if
end clicked
cheers
Budgie -
I previously created a 20GB mounted Volume using Disk Utility as a way of keeping track of files I needed to back up once I bought an external hard drive. However now that I bought one and backed up my computer, I need help deleting the volume.
Here is the information I have on the volume if it helps:
Type: Volume
Disk Identifier: disk1s2
File System: Mac OS Extended (journaled)
I just want to get rid of the volume altogether not just format it and I want to put the 20GB back to my Hard Drive total.
Any help is appreciated. Thank you ahead of time.Sorry I just wanted to add a little bit of information. The volume I named data.dmg is still there. That is the item I am trying to delete and have the free space go back to my hard drive.
Again thank you for the help. -
Mounted Volume Not Showing On Desktop or Sidebar
Our company uses a Mac Mini running OS 10.10 Yosemite to share files. File Sharing is setup to share contents on the Mac Mini with other Macs and PCs. Sharing is working fine. However, in the last couple days when logging into the Mac Mini the mounted volume (Mac Mini) no longer shows on the desktop, sidebar or when accessing the client hard drive. In order to access the Mac Mini after mounting via log in an alias to the Mac Mini needs to be created and access via the alias. Folders from the Mac Mini can be added to the side bar and accessed that way, but the main folder for the Mac Mini is only accessible through the alias. Preferences in the Finder are set to show mounted volumes and servers on the desktop.
Computers accessing the Mac Mini are running OS 10.6, 10.9, 10.8.Check the settings in the General tab of the Finder's preferences.
(69253)
Maybe you are looking for
-
Updated to IOS 8.02 everytime I check e-mail it deletes everything in my inbox. Help
Updated to ISO 8.02 and everytime I check my e-mail it deletes my entire inbox. Help please
-
Message getting cut off when using carkit
While using my 5800 and OVI Maps with my Nokia CK-100 carkit nagigation messages get cut of at the start (vey annoying). "In the next roundabout..." becomes "e next roundabout". "After 200 meters..." becomes "r 200 meters". And so on... Seems likie t
-
Hi, Thiis is my query.While returning data if coulmn value is single digit i need display with two decimals. For example o/p is 5 need to 5.00.Pls see the query and output. my database is 10.1.0.2.0 current o/p Mean Score Standard Deviation 4.99
-
Bacgflush error: Change REM profile
Hi Gurus, I have tried to backflush a part number. I get this error: 'Changed REM Profile regarding generation of postprocessing records'. From my knowledge we didn't chnge the REM profile and product cost collecter is also avilable. Please help to r
-
IPhoto 11 duplicates iPhoto library when I open it in Finder
The other night was on my wife's iMac and needed to grab a photo from my iPhoto library and upload it to the internet. I tried to open the connection to my Airbook where the photo resides and was prompted to login to connect to the iPhoto library.