Unable to move image from LR4 to CS6

This process works fine on my desktop but when I try to move an image from LR4.4 to CS6 on my new Lenovo laptop (Windows 7) nothing opens and I freeze up.

Your process sounds reasonable (I tend to right-click > edit in). I am assuming that PS CS6 works when launched independently of LR. Some troubleshooting ideas to try:
Check and modify Edit > Preferences > External Editing > Edit in... settings [general troubleshoot]
Add PS CS6 as the Additional External Editor in Edit > Preferences > External Editing > Additional External Editor and try using this instead – LR will moan about this being a duplicate [general troubleshoot]
Try the process using a different user account [troubleshoot user related config issue]
Repair (or reinstall) Photoshop CS6: Control Panel > Programs and Features > Adobe Photoshop CS6 > Repair [restore LR/PS interface config]
Restore default LR preference file (more info here: http://help.adobe.com/en_US/lightroom/using/WS82DA0B67-FA83-4c71-84B9-6F248A97FBE8.html and here: http://lightroomers.com/replacing-the-lightroom-preference-file/745/)

Similar Messages

Unable to remove image from photoshop

unable to remove image from photoshop

in the top line under adobe photoshop cs6
the data of the 2 images appears if i check the x it goes away only to return the next time I close photo and reopen cs6
same thing happens if I close individually or close all seems that any I way close it or empty the data bar
then close photo shop and reopen it the 2 images are back open photo shop from application in the application folder same thing
cut clear grayed out under edit

Can't MOVE images from one project to another: must not understand

Greetings,
I have two questions as a result of aperture not working the way that I have read on forums etc. and am wondering what i am doing wrong
1) How do I MOVE images from project to project without duplicating masters or versions
2) how do I delete versions
All of my files are referenced.
*1) moving from project to project*
I have a blue folder called "NEFs." In it, I have a default project where I just dump all of my images called "00 dump." After I dump them, I organize into other projects. So, I do the following:
• I create a new project called "2008 Thanksgiving" inside the NEFs blue folder making it a sibling to "00 dump"
• I go back to "00 dump" select all the images that were shot over thanksgiving, and drag to the "2008 thanksgiving" folder. The images transfer fine, but when I go back to "00 dump" I see that the images have NOT actually moved, they are now sitting in both projects. How can this be? I thought that if I move images from project to project then I am actually moving the master, not replicating a version? That leads me to my next dilemma
*2) how do I delete versions?*
Now that I have replicated photos in my "2008 Thanksgiving" project, I want to delete them since I see them still sitting in "00 dump." I do the following:
• select the "2008 Thanksgiving" project
• select a number of images
• press command + delete (this is the only way to delete a file as far as I can tell
• popup comes up explaining that if I delete this file it will delete the master too and the reference file. So, that's exactly what it does.
Deleting the referenced file is fine for many junk images, but in this case, I just want to delete the copied version that seems to be in two projects now. Any help would be greatly appreciated. I would really love a full understanding of how this structure works.
-i

When you drag images and the drop target is an actual little yellow project box (not a folder, and album or anything else) the images move from one project to another, if your drop target is not the actual project but something else within another project all you do is cause the version to show up there, nothing is duplicated.
To delete a version or versions selected just use command-delete. This gets rid of the actual version not just removes it from the current album view. If it happens to be the last version of that master it will get rid of the master as well.
Have a look at this:
[Aperture 2 Organization|http://photo.rwboyer.com/2008/07/apple-aperture-21-organization>
RB

When trying to open an image from LR4 in Photoshop CS5 I get a message asking me to download Camera

When trying to open an image from LR4 in Photoshop CS5 I get a message asking me to download Camera Raw 7.0. This is not on the Adobe web site. When will it be available?

<moved from Adobe Creative Cloud to Bridge General Discussion>

Unable to export image from Webi to excel.

Hi,
Can any one provide solution for export image from webi to excel( 3.1 & 4.0).
Thanks,
Praveen

given link(https://service.sap.com/sap/support/notes/1299111) is not working.
the above link contain
Symptom
Unable to Export images from a Web Intelligence report to Microsoft Excel.
A Web Intelligence report is created using images to denote alerts. The report works OK in Web Intelligence but when exported to Microsoft Excel, the images do not display.
Environment
Business Objects Enterprise XI Release 2
Business Objects Enterprise XI 3.1
Reproducing the Issue
Create a simple Web Intelligence document.
Add a blank cell and within that cell link it to an image. (Either set as background for the cell or Image URL.)
Save and export to Excel. The image will not be displayed.
Cause
Web Intelligence export engine does not support the export of images to excel.
Resolution
In BI4.0, Web Intelligence export engine does support the export of images to excel.
Workaround 1 :
Most image formats are supported in PDF export. Users may be able to use that as an alternative.
Workaround 2 :
If images are required in the final Excel document, the user would need to recreate those image links manually in Excel.
Keywords
Export , image , excel , WRC, Webi ,XIR2, XI3.1 , BI4.0
Header Data
Released On
21.10.2011 14:43:35
Release Status
Released to Customer
Component
BI Business intelligence solutions
Priority
Normal
Category
Problem
Product
Product
Product Version
SAP BusinessObjects Business Intelligence platform
SAP BusinessObjects Enterprise XI 3.0

Cant' move images from frame to frame inside a Grid in InDesign. Please Help

When creating a grid in indesign there is an option to move images from frame to frame, and having them rotate around the frames to see where each image is best to be placed. Example I created a grid with 6 images (2 rows and 3 columns) and now i want image 1 to be where image 6 is. I know there's a way by hitting the arrows and some other keys and have all the images start rotating. I did it once I just can't remember. Please help. How do you move the an image from one frame to another frame without having to go to edit place?
Thanks,
Paola

Swapping images

Unable to move project from external drive back to FCPX.

The HD was recently replaced in my iMac. Fortunately I had backed up my FCPX events and projects to folders on an external drive. I have down loaded FCPX again to the new HD but I'm unable to move my project back into FCPX. Having opened FCPX, I then open the project library, select the external drive, open the folder containing my project but the "current version fcpproject" is grey (not available). I was however able to drag the "fcpevent" file into the event library.
Any help will be appreciated

Since there is no disclosure triangle on your external showing in your project library, there are two possibilities:
1) There are no projects presently located on the drive.
2) Project files are on the drive but FCP can't see them because they are not at the root level of the drive.
So either way, to straighten this out you will have to move some files in the Finder – even though best practices (as both Tom and Luis have pointed out) are to stay within FCP to do that.
Move the existing CurrentVersion file to a temporary folder to hide it from FCP.
Unless you know that the Ball project is at a specific location on your external, do a spotlight search on Final Cut Projects. If something comes up, with FCP closed, navigate to it in the Finder and move it to the root level of the external drive. Then open FCP and it should now be accessible in your project library. Select it in the library; go to File>Move Project. Things should now work.
But if you don't have another copy on your external, open FCP and hot the plus button at the bottom of project library and create a new project. That will create a Final Cut Projects Folder in your Movies folder (which is where it should be in your home directory). Close FCP. Open the temp file and drag the CurrentVersion file that you hid to the Final Cut Projects folder.
Hopefully, you wil now be able to get back to work.
Russ

I am unable to save images from google! Tried turning I-pad off then back on, no avail!

I need help. I am unable to download/save images from google. I did turn off my I-pad and restart it. Still the same! What next?

How are you trying?
Are the images copyrighted and blocked from download?

Move images from one project to another

I have just upgraded from ap 1.5 to ap 2. In 1.5, when I moved an image from one project to another, the image was actually removed from the original project and placed in the new project. It has been my habit to upload all the images from a shoot into one project and then sort them into image specific projects; for example all blackbirds into a project labeled "blackbirds", all hawks into a project labeled hawks, etc. Once everything was sorted, the original project would be empty and I could delete it. This does not seem to be the case in ap 2. When I sort the images into their specific projects, they do disappear from the original project and thus I am unable to delete that project. Am I missing something?
Thanks
HPL

I had a bit of an unusual situation. I was in fact moving images from a FOLDER to a project in another folder. Turns out that there were albums in a project in the SOURCE FOLDER. I clicked on the folder, not the project, so although moving the images did indeed remove them from the source PROJECT, they remained in the various albums in that source project, still showing up in the SOURCE FOLDER, which is what I was working from, thus the confusion. I bet I won't make that mistake again.
Thanks for the help.
HPL

Unable to paste image from Powerpoint to Adobe X Standard

Good Morning all,
We currently have Adobe X Standard (10.1.3) installed on a Windows 2008 R2 environment shared between a dozen users. One user is attempting to copy an image from Powerpoint 2010 into a PDF. Trying the standard ctrl+c & ctrl+v commands doesn't work. If we go to edit in Adobe the paste option is greyed out. So we tried the snipping tool to see if this works and it does, but it's very hit & miss.
I thought that it may have something to do with the Standard version on Win 2008 so i installed it also on a stand-alone Win 7 machine. The copy & paste works absolutely fine.
Has anyone come across this before with Adobe installed on Win 2008 R2?
Many thanks
Dan

Thanks for the response David.
I've submitted a bug request. It is strange in regards to replicating the issue but your response is appreciated
I did contact Adobe Technical Support via the online chat and they suggested that the copy & paste function is not available under the Standard version. I did some more testing as per my previous replies and still the same thing happened.
As a workaround we managed to use the comment > stamp > copy stamp from clipboard function. This works well and in a similar way to copy & paste.

Can I move images from iView Media Pro into Aperture?

Can I import images previously catalogued in iView Media into Aperture?

Aperture can import:
File Formats
Native RAW import and editing of images from leading digital cameras and camera backs
(See RAW support page for model listing.)
.ARW, .CR2, .CRW, .MOS, .NEF, .RAF, .RAW, .SRW, .TIF, .OLY, .FFF, .3FR, .DNG1
Compatible with all major still image formats
JPEG, GIF, TIFF, PNG, PDF, PSD2

How to move images from Picasa to Lightroom 5 on a mac?

How to import images from Picasa to Lightroom 5 on a mac?

Hi, lnmyers,
I have thousands of pictures stored in Picasa, all of which are stored in my Picasa Web Albums. They are no longer in a directory on my hard-drive, that particular hard-drive having died ages ago. Thank goodness I uploaded them to Picasa's cloud before the hard-drive died. Should that ever darken, I am in trouble. I digress. I downloaded the pictures I wanted from Picasa Web Albums to my new external hard-drive that I set up and attached to my mac. For example: I had a an album called "California 2013" stored in the Picasa cloud. I downloaded the entire album to a folder on my Seagate external drive that I call Lightroom within which I have a folder called California 2013. It took about twenty minutes to get them all (300+ photos). Then, I pointed LR to the California 2013 folder on the Seagate external drive when I wanted to catalogue the pictures into LR. I did not worry about metadata; I took whatever came with the pictures and didn't worry about it. I added copyright, keywords, and ownership info with LR.
I hope that helps.

Adobe Flex unable to load images from Amazon S3

I have a flex 3 app that is attempting to load images from Amazon S3. The images fail to load, so I fired up debug mode. In debug mode, the images load, but I also get the following output in the debugger:
    *** Security Sandbox Violation ***
    SecurityDomain 'http://mybucket.s3.amazonaws.com/logos/mylogo.png' tried to access incompatible context 'http://localhost/myapp/bin-debug/index.html?debug=true'
I have added a crossdomain.xml file into the root of my bucket as follows, but this does not seem to help:
    <?xml version="1.0" encoding="utf-8" ?>
    <!DOCTYPE cross-domain-policy SYSTEM "http://www.adobe.com/xml/dtds/cross-domain-policy.dtd">
    <cross-domain-policy>
      <site-control permitted-cross-domain-policies="master-only" />
      <allow-access-from domain="*" />
      <allow-http-request-headers-from domain="*" />
    </cross-domain-policy>
I then tried the following:
Security.loadPolicyFile('http://mybucket.s3.amazonaws.com/crossdomain.xml');
Security.allowInsecureDomain('http://mybucket.s3.amazonaws.com/');
Security.allowDomain('http://mybucket.s3.amazonaws.com/');
At this point, it seems that there are not any more errors reported in debug mode. However, when not in debug mode, then the image still does not load.
Am I missing something obvious here?

If you are not getting creationComplete in release vs debug builds, it is best to try to identify the differences between the two runtime environments.
Is the URL to the SWF the same? Some folks find that their release folder is missing some important file.
Is the URL to the HTML wrapper the same? Some folks launch their debug from file:// and their release from http:// which have different security rules
Is the launch step the same? Some folks launch their debug from FlashBuilder and their export via some other mechanism. This can alter the initial size of the app and that difference can cause some apps to get into a “layout loop” and never hit creationComplete. To find out if you are in such a loop, report calls to updateDisplayList, and measure() on various compoonents and see if they keep getting called.
Is there a timing difference? Some apps may have subtle timing dependencies that change when the release build runs faster.

I am unable to export images from Aperture without crashing the app.

Having just upgraded to Mavericks and the current version of Aperture, I am unable to export images or videos without Aperture crashing. I'm reinstalled Aperture and done a fresh reinstall of Mavericks with no change in condition. Any suggestions?

Hi there mapboys,
You may find the troubleshooting steps in the article below helpful.
Aperture 3: Troubleshooting Basics
http://support.apple.com/kb/ht3805
-Griff W.

Unable to save images from photoshop

Using the external editor linked to Photoshop CC 2014, images from Aperture show up in Photoshop for editing. But after making changes, and saving the file, Aperture doesn't get updated for any of the changes I made in PS. Any suggestions on how to get edited images back into Aperture? (I am using Mac version 10.9.5 and Aperture 3.5.1)

Your assumption is correct.
The workflow is:
Select Image in Aperture for external editing.
Send Image to external editor via one version of Aperture's "Edit with NameOfExternalEditor" command.
Aperture creates a new Original based on the selected Image and opens specified external editor with the Original loaded.
You make changes to this file in the external editor.
You close this file and select "Save Changes" (or similar) when prompted.
You return to Aperture and find an Image based on the newly-created Original selected. This Image shows the changes you made in the external editor. It is badged with Aperture "Edited externally" badge.
Let's check a couple of things:
- Are you showing all Images in the Aperture Browser?
- Are there any externally-edited Images in the Project after you have completed editing in Photoshop?
For the first, clear any filter you have set for the Browser by clicking the dark-on-light drop-down magnifying glass icon _in_ the Browser search field and selecting "Show All".
For the second, filter for externally edited Images by clicking the dark-on-light magnifying glass icon _next to_ the Browser search field and setting a filter with the Rule "File Type" set to "is", "externally edited".
Report back.

Unable to move image from LR4 to CS6

Similar Messages

Maybe you are looking for