Unable to narrow the minimized window view for Thunderbird

Until a few weeks ago I could minimize the Thunderbird window to fill only half my screen left to right. Now, it will only minimize to about 2/3 of my screen. When I drag the edge to a narrower position it goes only so far and stops. I don't know why all of a sudden this change occurred. Is there a way to make the minimized Thunderbird window narrower? I'm using Windows 7 Professional Version and Thunderbird version 24.4.

sfhowes, I followed your suggestion above but it didn't help. I did disable my only add-on (Lightening 2.6.4 integrated calendar) and restarted Thunderbird and that seems to have solved the problem. I hadn't connected the fact I added Lightening a few weeks ago to the sudden inability to narrow the window problem. Perhaps future versions of Lightening can correct this problem. Thanks for your help.

Similar Messages

  • Changing the default associated view for a related entity

    A question from a peer:
    Hey there
    Do you know how in CRM 2015 to change the default associated view for a related entity?
    Say you are in an Account and from the menu open the opportunities for that account.
    That new pop up window states “Opportunity Associated View” I want to change that to “My Custom View”
    I thought we covered this in class years back but cannot remember

    There are a few ways to get what you want, the easiest being
    Create a document as you want it for a particular site, save it is junk.php or similar and create a new file by saving as this as the proper document name such as index.php
    Use the Dreamweaver template system, i.e. create a template with a .dwt.php extension like template.dwt.php and use that to create new pages.
    There are other ways like creating your own php template system. But you can put that in the too hard basket.

  • Unable to find the default new form for list mylist1 - deploying the list instance via module feature

    hi,
    am facing a problem deploying a list instance via a feature, 
      I created the list in the UI with content and views.
    Exported the site template as WSP.
    Imported into Visual Studio the list instance, pages module and property bags.
    Copied into my new solution.
    Deploy list instance as a site-collection level scoped feature.
    activated the below features :
    mylist_ModulesFeature
    mylist_ListInstancesFeature
    mylist_PropertyBagFeature
    List deploys fine with content and views. However, I receive the following error when trying to add a new item: “Unable to find the default new form for list”. The same applies for editing items.
    can anyone pls help why i am getting this  error ?

    try these links:
    http://tomvangaever.be/blogv2/2010/04/unable-to-find-the-default-new-form-for-list/
    http://sharebrad.blogspot.in/2012/08/unable-to-find-default-edit-form-for.html
    http://stackoverflow.com/questions/10243131/deploying-a-list-instance-to-sharepoint-2010-error-unable-to-find-the-default-n
    https://happiestsharepointminds.wordpress.com/2014/03/01/unable-to-find-the-default-edit-form-for-list-or-unable-to-find-the-default-display-form-for-list/
    http://itsolutionsblog.net/sharepoint-problem-with-library-forms-unable-to-create-folder-ore-edit-properties/
    http://blogs.technet.com/b/yashgoel-msft/archive/2013/08/30/recreating-default-display-edit-and-new-forms-of-a-list-in-sharepoint-2010-using-powershell.aspx
    Please mark answer as correct if it is correct else vote for it if you find it useful

  • Unable to get the file system information for: \\****servername\E$\; error = 64 Unable to distribute content to DP

    One of our DPs has stopped loading content. 
    I've research for quite a bit and cannot find a clear cut reason to this.  This server only has a DP role, I verified sharing permissions, all looked good. This DP has been running just fine for the last year or so and all sudden it will no longer load
    packages.  The disk drive is still present I can still reach the hidden share \\servername.com\E$
    Verified that the SMSSIG$ folder is there and the last entry is from 4/23/2015 
    SCCM 2012 R2 
    OS 2008 R2 Standard
    Any help is greatly appreciated!
    Here's a snipit from the distmgr.log
    Start updating the package on server ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\...
    Attempting to add or update a package on a distribution point.
    Will wait for 1 threads to end.
    Thread Handle = 0000000000001E48
    STATMSG: ID=2342 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=***.com SITE=1AB PID=2472 TID=8252 GMTDATE=Thu Apr 30 19:12:01.972 2015 ISTR0="SYSMGMT Source" ISTR1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
    ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="CAS00087" AID1=404 AVAL1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
    SMS_DISTRIBUTION_MANAGER 4/30/2015 2:12:01 PM
    8252 (0x203C)
    The current user context will be used for connecting to ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\.
    Successfully made a network connection to \\*****.com\ADMIN$.
    Ignoring drive \\*****.com\C$\.  File \\*****.com\C$\NO_SMS_ON_DRIVE.SMS exists.
    Unable to get the file system information for: \\*****.com\E$\; error = 64.
    Failed to find a valid drive on the distribution point ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\
    Cannot find or create the signature share.
    STATMSG: ID=2324 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=sccmprdpr1sec2.mmm.com SITE=1AB PID=2472 TID=8252 GMTDATE=Thu Apr 30 19:12:55.206 2015 ISTR0="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
    ISTR1="CAS00087" ISTR2="" ISTR3="30" ISTR4="94" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="CAS00087" AID1=404 AVAL1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
    Error occurred. Performing error cleanup prior to returning.
    Cancelling network connection to \\*****.com\ADMIN$.

    Error 64 is being returned which is simply "the network name is no longer available".
    There can be a number of reasons for this from SMB compatibility issues (2003 servers wont support SMB2), to the expected and actual computer name of the boxes don't match (tries to authenticate with server.tld.com when the actual name is srv-01.tld.com and
    you just put a C-name in). I'd start from the top:  Try opening said share from the Primary Site server as that's the box doing the work.  Verify the IP and computer name is legit and that no one has played ACL games between the two systems (remember
    RPC only initiates/listens on port 135 but established connections are up in the dynamic port range).
    At the end of the day it's an issues "underneath" SCCM, and not an SCCM problem specifically. 

  • How to hide the Columns and Views for Login user in SharePoint 2013

    Hi Friends,
    How to hide the Columns and Views for Login user in SharePoint 2013? Is it possible using OOB features? If not possible how can we hide the Columns and Views for Login user?
    Could you please help on this.
    Thanks,
    Tiru
    Tiru

    Hello Tirupal,
    There is no OOB way to do this.
    Please check this codeplex solution to achieve the same.
    https://sp2013columnpermission.codeplex.com/
    My Blog- http://www.sharepoint-journey.com|
    If a post answers your question, please click Mark As Answer on that post and Vote as Helpful

  • What's the coolest photo viewer for a macbook..?

    Good Day,
    Recently I bought a macbook and I was wondering what is the best photo viewer for it,
    Thanks in advance for you further suggestions,

    Good Day,
    Recently I bought a macbook and I was wondering what is the best photo viewer for it,
    Thanks in advance for you further suggestions,

  • Unable to determine the install root path for the LabVIEW Runtime Engine

    Hi,
    i have an issue with using a LabVIEW interop assembly in a .NET application. I get an exception "Unable to determine the install root path for the LabVIEW Runtime Engine" when calling the assembly.
    The little test program is attached below. It's called dotNETHost.exe. If you excecute the programm a dialog with an button appears. Clicking the button shall open another dialog (the LabVIEW Interop component). But the only thing I get is the exception message. The ZIP folder also contains the complete exception meassage (ExceptionMessange.jpg & ExceptionDetails.txt).
    The Interop Assembly was built with LabVIEW 2011. We use Visual Studio 2010 and .NET 4.0.. The dotNETHost.exe.config file is prepared as mentioned in Knowledge base - Loading .NET 4.0 assemblies.
    The Interop assembly contains only one simple dialog (loop is finished by clicking OK) without calling any other VIs or other DLL's.  In case of this there's also no support directory generated by the build process.
    I have no idea why it doesn' work. I hope anyone can help me.
    Thanks in advance
    Kay
    Attachments:
    Debug.zip ‏75 KB

    This may be unrelated, but Labview and .Net4.0 dont work well together. Not yet anyway. I had to compile my assembly in 3.5 to get it to work.
    Please read the following:
    http://zone.ni.com/reference/en-XX/help/371361H-01/lvhowto/configuring_clr_version/
    http://digital.ni.com/public.nsf/allkb/32B0BA28A72AA87D8625782600737DE9
    http://digital.ni.com/public.nsf/allkb/2030D78CFB2F0ADA86257718006362A3?OpenDocument
    Beginner? Try LabVIEW Basics
    Sharing bits of code? Try Snippets or LAVA Code Capture Tool
    Have you tried Quick Drop?, Visit QD Community.

  • Unable to interpret the prtdiag o/p for CPU Slots & Memory DIIMS - V890

    Unable to interpret the prtdiag o/p for CPU slots & Memory DIIMS on V890 server. Went through the sun docs for V890, but lead to lot of confusion.
    your help on this would be appreciative.
    Thanks

    Hi,
    below is the sample prtdiag output I've taken from a lab machine
    System Configuration: Sun Microsystems sun4u Sun Fire V890
    System clock frequency: 150 MHz
    Memory size: 65536 Megabytes
    ========================= CPUs ===============================================
    Run E$ CPU CPU
    Brd CPU MHz MB Impl. Mask
    A 0, 16 1500 32.0 US-IV+ 2.2
    B 1, 17 1500 32.0 US-IV+ 2.2
    A 2, 18 1500 32.0 US-IV+ 2.2
    B 3, 19 1500 32.0 US-IV+ 2.2
    C 4, 20 1500 32.0 US-IV+ 2.2
    D 5, 21 1500 32.0 US-IV+ 2.2
    C 6, 22 1500 32.0 US-IV+ 2.2
    D 7, 23 1500 32.0 US-IV+ 2.2
    ========================= Memory Configuration ===============================
    Logical Logical Logical
    MC Bank Bank Bank DIMM Interleave Interleaved
    Brd ID num size Status Size Factor with
    A 0 0 2048MB no_status 1024MB 8-way 0
    A 0 1 2048MB no_status 1024MB 8-way 0
    A 0 2 2048MB no_status 1024MB 8-way 0
    A 0 3 2048MB no_status 1024MB 8-way 0
    B 1 0 2048MB no_status 1024MB 8-way 1
    B 1 1 2048MB no_status 1024MB 8-way 1
    B 1 2 2048MB no_status 1024MB 8-way 1
    B 1 3 2048MB no_status 1024MB 8-way 1
    A 2 0 2048MB no_status 1024MB 8-way 0
    A 2 1 2048MB no_status 1024MB 8-way 0
    A 2 2 2048MB no_status 1024MB 8-way 0
    A 2 3 2048MB no_status 1024MB 8-way 0
    B 3 0 2048MB no_status 1024MB 8-way 1
    B 3 1 2048MB no_status 1024MB 8-way 1
    B 3 2 2048MB no_status 1024MB 8-way 1
    B 3 3 2048MB no_status 1024MB 8-way 1
    C 4 0 2048MB no_status 1024MB 8-way 2
    C 4 1 2048MB no_status 1024MB 8-way 2
    C 4 2 2048MB no_status 1024MB 8-way 2
    C 4 3 2048MB no_status 1024MB 8-way 2
    D 5 0 2048MB no_status 1024MB 8-way 3
    D 5 1 2048MB no_status 1024MB 8-way 3
    D 5 2 2048MB no_status 1024MB 8-way 3
    D 5 3 2048MB no_status 1024MB 8-way 3
    C 6 0 2048MB no_status 1024MB 8-way 2
    C 6 1 2048MB no_status 1024MB 8-way 2
    C 6 2 2048MB no_status 1024MB 8-way 2
    C 6 3 2048MB no_status 1024MB 8-way 2
    D 7 0 2048MB no_status 1024MB 8-way 3
    D 7 1 2048MB no_status 1024MB 8-way 3
    D 7 2 2048MB no_status 1024MB 8-way 3
    D 7 3 2048MB no_status 1024MB 8-way 3
    <snip>
    Board A, B, C & D represents 4 slots of the V890. Each slot has two CPU and associated memory slots ( 8 nos. for each CPU ) for each CPU.
    Since its Sparc IV+ cpu, it has two cores and thus will have two CPU id associated with each physical CPU.
    Slot A ==> CPU 0 & 2
    Slot B ==> CPU 1 & 3
    Slot C ==> CPU 4 & 6
    Slot D ==> CPU 5 & 7
    For memory interleaving and bank configuration, please go through below document.
    http://docs.sun.com/source/817-3956-12/hw_config.html
    HTH..
    Mehul

  • What is the best windows version for gaming on 32bit system

    what is the best windows version for gaming on 32bit system?

    Hi,
    What game do you want to install in Windows? For a game, you should choose your OS based on your game requirement.
    Andy Altmann
    TechNet Community Support

  • I have some windows minimized. When I try to open up another window from the start menu, even the minimized windows open up.

    When I first open up a window from the start menu, just one window opens up. But when others are at the bottom (minimized) and I go to open up a new window from the start menu, all the minimized windows open up, too.

    That can a problem with the Ask<i></i>.com toolbar (Tools > Add-ons > Extensions)
    See:
    * [[Troubleshooting extensions and themes]]

  • When I use IWeb for my blog, many people claim they are unable to use the comment window, claiming they get an "error" message.  I have check "allow comments" on the appropriate page.  Any help would be great.

    When I use IWeb to post my blog, many readers claim they are unable to post a comment.  When they attempt, they receive an "error" message.  I have check and re-checked that "allow comments" is checked in the appropriate window.  Any help would be greatly appreciated.

    You can publish your blog on any server but will lose the commenting capability.  Since you'll have to find a new host soon anyway since MMe will go away on June 30, you might consider converting your blog to WordPress as that's the only  other blog type that an MMe blog can be converted to and keep it's comments, etc.  Rage Software has create an application that will convert an iWeb blog to WordPress: Convert Your iWeb Blog to a WordPress Blog | iWeb to WordPress. That way you can keep your blog's continuity.
    This may be of some additional help to you: Life After MobileMe.

  • Unable to read the source URL error for cffeed

    Hi,
    I am using the cffeed to read from my twitter RSS feed but I get this error:
    Unable to read the source URL.
    Status Code: 400. Try adding or changing UserAgent attribute in the CFFeed tag
    My code is:
    <cfset feedurl="http://twitter.com/statuses/user_timeline/somenumbers.atom" />
    <cffeed 
    source="#feedurl#"
    properties="feedmeta"     
    query="feeditems1" overwrite="true" />
    It works but suddenly it stops and it takes time about 15 minutes or more  to work again.
    Can any body help me with this?
    Thanks,
    Mandana

    One thing which I did not mentioned is I want to have 6 pages rss feed together and I made it like this:
    <cffeed 
        source="#feedurl1#"
        properties="feedmeta"
        query="feeditems1" overwrite="true"
        useragent="Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.2; WOW64; Trident/4.0; GTB6.6; InfoPath.2; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; .NET4.0C; AskTbBLPV5/5.11.3.15590)" />
       <cffeed
        source="#feedurl2#"
        properties="feedmeta"
        query="feeditems2" overwrite="true"
        useragent="Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.2; WOW64; Trident/4.0; GTB6.6; InfoPath.2; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; .NET4.0C; AskTbBLPV5/5.11.3.15590)"/>
    I did it for 6 pages, each one with one cffeed and then:
    <cfquery name="feeditemstotal" dbtype="query">
        select * from feeditems1
        union
        select * from feeditems2
        union
        select * from feeditems3
        union
        select * from feeditems4
        union
        select * from feeditems5
        union
        select * from feeditems6
      </cfquery>

  • Unable to resize the Edit window in Premier Elements 11

    I am unable to resize the premier elements edit window - it just leaves a trail of images of the edit window on the screen when I try to make the window smaller - It doesn't refresh the desktop behind, no problem using and resizing window in Photoshop Elements 11 installed at the same time and also the organise window is resizeable OK just the edit window a problem - any ideas - I am using Windows 7 64 bit?

    Full -Computer spec is - Windows 7 64-bit, 8Mb RAM, Processor Intel Core i5-2400 CPU @ 3.10 GHz and graphics card AMD/ATI Radeon HD6570 2Gb RAM - Updated windows and Graphics card driver. When rebooted my windows had gone into an Aero theme and worked OK - but putting back to windows classic - problem returned i.e. Organise editor OK but Video Editor with just New Project and no media added resizing window just leaves a trail around the screen. Put back to Aero theme and now OK again.  Tried going into System properties / advanced / visual effects / Show windows contents whilst dragging - and turned off but still did not work with Windows classic theme.
    So don't know why it is happening but it is at least a work around - thanks for your help.

  • Unable to create the portable home directory for this user

    This is driving me nuts!
    I have a network user who I can login to on any machine on the network. I want a PHD to be created on a laptop and eveytime I answer 'yes' to 'create PHD for this user' I get the "unable to create the PHD for this user" message.
    What am I doing wrong?

    I fixed this by unbinding the laptop from the od server as I had used this user previously for PHD's on this machine. Setting up the machine to bind to OD again and all is well.

  • Installing minimal windows client for ODBC

    Does anybody know how to install an oracle ODBC driver to access oracle databases with the following:
    - keep oracle client as small as possible (jdbc needs less than 1.5 MB!)
    - not to use tnsnames.ora (jdbc does not need this and works fine)
    - connecting to databases from workstation as user and not administrator (8.x works but 10.....)
    - not to change registry nls_lang entry for connecting to different databases with different settings!
    I did never before encounter problems like this with other databases. As we have to user oracle (with ODBC) we have to configure our clients.
    btw: odbc driver version is 10g

    Thanks a lot for your help,
    I got a step further. The mistake was to set the path on the main directory which in my case was C:\Instantclient
    instead of the directory created unzipping the installation files: C:\Instantclient\instantclient_10_2
    But now I'm in defining the datasouce:
    As stated in the help file:
    Before you configure the data source, you must configure network database services so there is an entry for each TNS Service Name. To do this, start the Oracle Net Manager by one of the following methods:
    From the start menu, select Programs, select Oracle for Windows NT, and select the Oracle Net Manager.
    Using the Oracle Net Manager, you can create an entry in the tnsnames.ora file for each TNS Service Name. The Oracle Net Manager is installed when you install Oracle Net Services.
    But I don't have any entry in the program group. Does the instant client create an entry as well?
    Do I have do install the Oracle Net Services additionally to the Instant client?
    In the releasenotes above from legatti they are talking about an TNS_ADMIN entry which has to point to the ora files?
    Do I have to define this as systemparameter pointing to the C:\Instantclient\instantclient_10_2 directory as well.
    Thanks a lot for every hint
    Axel

Maybe you are looking for