Unable to navigate TOC

Whenever I re-launch a course, I am unable to access previously viewed slides/pages despite having the TOC enabled.
I have hidden slides and I'm using the SendTrackingDataatEnd template with the following settings enabled:
Self-paced learning
Enable navigation
Navigated visited slides only
Set exit to normal after completion
Thanks!

Self-paced learning is disabled when you enable reporting to an LMS. So you can forget about that working to bookmark the location you last reached when accessing the course. By contrast, Resume Data Bookmarking may work when reporting to your LMS (depending on the LMS) but it will NOT have any impact on your TOC when launching the course for a second time.

Similar Messages

Recording on DVD - "Unable to recover TOC" error

Hi all
Whenever I try to record on a DVD a face "Unable to recover TOC"
I've tried to change the recording speed but no use.
When I go to DVD properties and click on enable recording it does not recognize the DVD or any other CD in the drive.
Please some help

Hi,
1. What software do use to burn cd/dvd disks? Try to use Nero, Ashampoo burning studio, Alcohol CD and DVD Burning Software,
2. Then, I advise you to use high quality medias as TDK or Verbatim.
3
Go to device manager and remove the CD/DVD drive from the device list.
Then access the registry and remove the Upperfilters and Lowerfilters values completely from the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class{4D36E965-E325-11CE-BFC1-08002BE10318}
Reboot the notebook and wait until the CD/DVD drive would appear again
If you still have problems, maybe there is a problem with your cd/dvdrom

Unable to Navigate Organization in "Maintenance Super User" Responsibility (Eam Self Service Pages)

Dear friends,
Iam learning Oracle EAM module, now i had a problem that i couldn't able to find EM1 Organziation in the LOV, though i have done Organziation access also, based on the Oracle support.
Solution from Oracle Support
======================
Unable to Navigate in 'Maintenance Super User' Responsibility (EAM Self Service pages) (Doc ID 1053400.1)
If you have the Organizations LOV empty, then you need to go to (Navigation) -Inventory (responsibility) > Setup > Organizations > Organizations Access. Here you need to define a new line for each organization you want to access from the EAM SS responsibility.
Kindly respond on this issue.
Thanks
Shruthi

Try to compare the menu that you have created with Functional Administartor menu structure. It may help to debug your problem.
Thanks,
Mitiksha

Hi Folks, I have a problem with OBIEE EM, There in Enterprise Manager i am unable to navigate into the options like when i clik on any Tab it is not working and even i am unable to create a report using analysis.

Hi Folks,
I have a problem with OBIEE EM, There in Enterprise Manager i am unable to navigate into the options like when i clik on any Tab it is not working and even i am unable to create a report using analysis.
Thanks in advance

i have also tried that but no use can u give me any other way.......

Unable to navigate requested Expression.Please fix the metadata consistency

Hello ,
I have created one criteria but when I m running the request i m geeting this error, State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 14026] Unable to navigate requested expression: Dim - GL Account.Unit Code. Please fix the metadata consistency warnings. (HY000)
now when i checked the RPD for this and run the consistency check everything went fine.No warning MSG, No Error, No Best Best Practice.
now i checked the join condition in BMM for the dimension i m using in report and fact.
it's like Fact F is directly Joined with Dim A & Dim B.
now when i checked the Physical join it's like Fact F1 is joined with Dim Aand Dim C , Fact F2 is joined with Dim B and Dim C.
so there is no direct fact table join between Dim A and Dim B.
Fact F1 & Fact F2 goes as MTLS in BMM and creating Fact F, now when i got this error i went to Fact F in BMM and checked the LTS and level of granuality for DIM A and Dim B for Fact F1 and Fact F2 respectively. and it is also set as detail level. and in BMM LTS Fact F1 and Fact F2 is also join with inner join with Dim C. and Dim C's level of granuality is also set in Fact F1 and Fact F2 .
the Columns that i m taking criteria are coimng from Fact F, Dim A, Dim B.
can anyone suggest me what to do in this case????
Thanking you..

Hi Veer,
If I get you correctly,
In BMM
Fact F = (physical F1 + F2)
In Physical:
F1 -> Dim A, Dim C ; F2 -> Dim B,Dim C
So, in your BMM, please make sure that
1. Logical source for physical F1 has 'Detail for Dim A, Dim C' and 'Total for Dim B'
2. Logical source for physical F2 has 'Detail for Dim B , Dim C' and 'Total for Dim A'.
I think this should resolve the issue.
Hope this helps.
Thank you,
Dhar

NQSError: 10058 - Unable to Navigate Requested Expression Error in OBIEE

We are getting the below error when we try to generate report using a dimension column and a fact column.
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 14026] Unable to navigate requested expression: FILTER(# of Responses:[DAggr(Fact - Leads & Interest .# of Responses by [ Dim - Contact.First Name, Dim - Contact.ROW_ID, Team & Opty Based Org.POSTN_WID, Team & Opty Based Org.Level 1 Employee Name, LN Leads & Interest.ROW_ID] SB Revenue Attributes Total,Sales Velocity Attributes Total)] USING Team & Opty Based Org.Level 1 Employee Name <> 'Test, USLMMarketing' and (LN Leads & Interest.Customer Supplied Email <> email@removed ' or LN Leads & Interest.Customer Supplied Email is null)). Please fix the metadata consistency warnings. (HY000)
We are using the below logical formula for the measure column.
FILTER(Core."Fact - Leads & Interest "."# Of Response Final" USING (Core."LN Leads & Interest"."Customer Supplied Email" <> email@removed ' OR Core."LN Leads & Interest"."Customer Supplied Email" IS NULL ) AND Core."Team & Opty Based Org"."Level 1 Employee Name" <> 'Test, USLMMarketing')
We have this measure in a logical fact table.
Please help me know why would this error occur.

Sorry i missed while pasting the formula. Below is the logical column formula.
FILTER(Core."Fact - Leads & Interest "."# Of Response Final" USING (Core."LN Leads & Interest"."Customer Supplied Email" <> '[email protected]' OR Core."LN Leads & Interest"."Customer Supplied Email" IS NULL ) AND Core."Team & Opty Based Org"."Level 1 Employee Name" <> 'Test, USLMMarketing')
This measure is working properly with other dimension attributes in the subject area.

Unable to navigate requested expression:

Hi Everyone,
I am getting the error message "Unable to navigate requested expression: " in my "Contracts" subject area when I try to select date fields from two different facts.
My setup is as follows. I have 3 dimensions and 2 facts.
Contract_Start_Date_D -----1-to-many ---> Contract_Costs_F <--many-to-1----Contract_Details_D
and
Employee_Start_Date_D ---1-to-many-----> Contract_Employee_F <---many-to-one---- Contract_Details_D
Both of the date dimensions are aliases of a common DATE_D dimension.
The Contract_Details_D table is common to both fact tables(no alias).
I've created RPD Dimensions objects for all the "D" tables.
The content tab of the LTSs of the facts are as follows:
Contract_Costs_F:
Employee_Start_Date_D --- Highest level
Contract_Detail_D --- lowest level
Contract_Strat_Date_D --- lowest level
Contract_Employee_F:
Employee_Start_Date_D --- lowest level
Contract_Detail_D --- lowest level
Contract_Strat_Date_D --- Highest level
My RPD is consistent, and when ever I select only fields from dimensions which are directly related to a fact, my results come back fine. For example, if I just select contract start date and the contract details, then I am fine.
But when ever I try to cross over the facts, i.e. I try to get a contract start date and an employee start date at the same time, I get the "Unable to navigate requested expression" error.
Is it possible to see these two values in the same report? If so, how can I accomplish this?
Thanks in advance!
-Joe

Hi all,
I also have this error after adding the following filters to my request
AND Time."Year" = evaluate('zmer0002(%1)', date'@{DATE_PROMPT}')
AND Time."Week No" = evaluate('zmer0001(%1)', date'@{DATE_PROMPT}')
where "zmer002" and "zmer001" are stored procedures returning the year and the week number based on a date, respectively
and "@{DATE_PROMPT}" is a presentation variable, from a dashboard prompt
If the presentation variable is replaced by a constant (e.g. '2009-01-01') the error does not occur.
Any ideas?
Thanks,
M

YTM error: Unable to navigate requested expression: ToDate

I've created a new fact column: Transaction Amount YTM
the code: TODATE(Core."Fact - HR - Kostenverbijzondering"."Transaction Amount", Core."Date"."Month")
I did a consistency check en there were no errors.
When i want tot see the result in obiee: i get the following error:
Toestand: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 14026] Unable to navigate requested expression: ToDate(Transaction Amount:[DAggr(Fact - HR - Kostenverbijzondering.Transaction Amount by [ Dim - Date.Month, Dim - Date.Month Name, Dim - Date.Year, Dim - Date.Calendar Month] )], [Level Month]). Please fix the metadata consistency warnings. (HY000)
I don't know why it does not work.. can anyone help? tnx in advanced

Check the below post,
Time Dimensions and Logical dimension "..that not join to any fact source"
Thanks,
Vino

[nQSError: 14026] Unable to navigate requested expression

Hi,
My BMM diagram is like
D1 --- Fact 1 -- D 2 -- D3 -- Fact 2 -- D4
I am getting navigation error, When I selected the fields from Fact1 and D4.
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 14026] Unable to navigate requested expression:Fact1 .Flag. Please fix the metadata consistency warnings. (HY000)
SQL Issued: SELECT Fact1. Flag" saw_0, D4. Code saw_1 FROM "Temp" ORDER BY saw_0, saw_1
As there is no join between Fact 1 and D4. I have tried by setting Aggregation level of D4 to Total at Fact 1. But still I am getting same error.
Any suggestions to fix this error?
Thanks.

Hi
Have you resolved this issue? I am facing same issue can you let me know how did you resolve this issue
Thanks & Regards
Sameer

Unable to navigate the folders in JFileChooser when we have Unix file syste

I'm trying to display a JFileChooser on a client system (that happens to be Windows) that will allow the user to browse the filesystem and open files from a remote system (that happens to be UNIX). To do this, I've created a class which extends FileSystemView, and created a JFileChooser using these class.
This allows me to see all of the files and directories in the home/default directory when the dialog is first displayed. However, I cannot navigate in the dialog box. I am unable to navigate by double clicking on the folder. JFileChooser setCurrentDirectory() ignores FileSystemView model
Can Any one help me in this?

What is your DB version?
If you are using 11g, use adrci > show alert > choose the database to view alert log. The events are always logged in alert.log, you are probably looking at wrong/old file .

OBIEE error on Drill-down : Unable to navigate requested expression

Hi Gurus,
While trying out drill-down, am facing the folllowing error message - State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 14026] Unable to navigate requested expression: XXX Time.YYY Month. Please fix the metadata consistency warnings. (HY000)
I searched for the solution and found that we need to define an aggregated measure of a dimension table. But I dont know how to do it as I have very less hands-on in OBI Admin Tool. Kindly help me by explaining in detail to solve this issue.
Thanks in advance.

Hi,
To define an aggregated measure of a dimension table, complete the following steps:
*1.Create a new fact logical table with the physical dimension table as source.*
*2.Include all fields that should be aggregated as a measure of this new fact object.*
*3.Add an aggregation rule to the column*
*4.set the logical level of the other dimensions to the grand total level.*
Below, a sum aggregation rule :
for more info:
i.e:
put the measure indicated by the error message in a fact table object.
To define an aggregated measure of a dimension table, complete the following steps:
a) Create a new fact logical table with the physical dimension table as source.
b) Include all fields that should be aggregated as a measure of this new fact object.
http://gerardnico.com/wiki/dat/obiee/dimension_measure
Thanks
Deva
Edited by: Devarasu on Sep 29, 2011 7:02 PM

Unable to navigate in windows 7

My didigtal editions v3.0 does not change pages on windows 7. I even tried digital editions v2.1 but that still had the same problem. I am unable to navigate from page to page. Very frustrating as it makes it impossible to read the text book. Any suggestions on what to do?

If you use extensions (Firefox/Tools > Add-ons > Extensions) that can block content (e.g. Adblock Plus, NoScript, Flash Block, Ghostery) then make sure that such extensions aren't blocking content.
You can try these steps in case of issues with web pages:
Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Unable to Navigate obiee 10g

Hi,
I have a requirement to when i enter the user credentials in obiee Answers login page ,
credentials correct--------navigate to Application
Wrong--------Navigate to one blank HTML page
Where i need to call these HTML page and in how many .xml files i need to do the modifications
any help appreciated....
thanks,
prassu

Look for the tag kmsgAuthenticateUnableToLogon in the file logonmessages.xml
You need to replace the below text
<TEXT>Unable to Log In</TEXT></WebMessage>
with HTML code for ex:
<HTML>
<script>
document.write("hai");
</script>
</HTML>
The idea is to not to show the OOB login screen and show some text on the page.
I cant try this at my local since I dont have 10g.
Pls mark if helps
Edited by: veeravalli on Sep 27, 2012 4:23 PM

Unable to navigate TOS

Hello! I enabled the TOS and opted to let the users navigate thru the presentation.
But it's not working. Am I doing something wrong? Please advise. Thanks!

Oh yes: TOC. lol
Anyway no pretest slides but yes the branch aware is checked. Thanks a lot Lily!

Unable to navigate in Ebay using Firefox 27.0.1 running in Windows 7; getting ebayISAPI.dll required error

Unable to access information when using Firefox 27.0.1 in Windows 7 environment; getting requirement to run ebayISAPI.dll file and doesn't allow any further access to ebay information.

If you use extensions (Firefox/Tools > Add-ons > Extensions) that can block content (e.g. Adblock Plus, NoScript, Flash Block, Ghostery) then make sure that such extensions aren't blocking content.
You can try these steps in case of issues with web pages:
Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Unable to navigate TOC

Similar Messages

Maybe you are looking for