Unable to obtain dynamiclink server
Hello.
I'm using a windows 8 pc. I think its a 64bit, not sure. but anyways i installed adobe creative cloud. had trouble installing after effects due to internet and such. but eventually i got it downloaded then had trouble actually starting it. ran as administrator and that fixed it. today i tried doing a camera tracker and i got the message "unable to obtain dynamiclink server" and i'm really fustrated, ive dealt with so many issues lately ive almost had enough. Ive look on the forums for answers and saw none. Please help. and if any of you could tell me how i'm supposed to uninstall and reinstall after effects that would be great. cause when it wasn't working i uninstalled it and tried finding the files again that i through in the trash and from then ive had trouble. Point being i'm inexperianced and need assistance. In fact. after effects doesn't even show up in the control panel uninstall. so i'm somehow using it and its not even there...
Best regards, Kyle West
Message was edited by: Irishoffspring
Run the cleaner tool and then reinstall if you must:
http://www.adobe.com/support/contact/cscleanertool.html
Won't solve your issue, though, I can tell you that. As we've written like a gigazillion times on this forum, AE not being able to connect to external processes comes down to blockages from virus scanners or general issues with the operating system like specific TCP ports being unavailable due to network configuration and firewall settings. You need to straighten out that part.
Mylenium
Similar Messages
-
I try to add a 3d camera to a clip but when it analyzes I get unable to obtain dynamiclink server
HHelp please
This issue was discussed in a thread last year, and the resolution at the time was to uninstall After Effects, use the CC Cleaner Tool, then re-install.
-
AE CS6 warning: unable to obtain dynamiclink..
I'm using a pc with windows 64 bit, and get this warning when trying to analyse the footage with either the 3D camera tracker or warp stabilizer. A warning pops up that says, unable to obtain dynamiclink server connection, and the footage does not analyse. The only solution is restarting my machine.. not very time saving.
Also similar issue, when I am working on a comp in AE and go to open the edit in premiere pro, premiere freezes and closes without opening.. only way to fix this is to either restart the machine, or have opened a premiere project before opening an AE comp
Is there a problem with the server connection with the adobe programs and windows, and how do I fix this?
Thank you!See the suggestions for related problems here:
http://helpx.adobe.com/x-productkb/multi/startup-screen-hangs-premiere-after.html -
Error: Logon rejected for Unable to obtain Terminal Server User Configuration. Error: Not enough resources are available to complete this operation.
The problem is that the SharePoint server will
function just fine for a week or so and then suddenly when a new user tries
to log on they get an error message indicating that not enough resources areavailable to
log them on and also user will to credential prompt while accessing share point site .
RajHi,
According to the error message, please use performance monitor to diagnose if it is a memory-related bottleneck and you can use the counters of the memory part in the article below:
https://technet.microsoft.com/en-us/magazine/2008.08.pulse.aspx
In addition, it may be due to thousands of open connections to the server are in a TIME_WAIT state. You can run "netstat -an" command on the affected server and client. If you see mutiple connections in the TIME_WAIT state, you can follow the article
to increase the number of TCP/IP connections:
https://msdn.microsoft.com/en-us/library/ee377084(v=bts.70).aspx
Furthermore, if you are running windows server 2003, please make sure that you have installed the KB 948496 and stop all services that you don't need.
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
"timed out obtaining dynamiclink server connection" in After Effects
I've seen a lot of other people have this same problem, none of the solutions ive seen are working for me.
Problem appears when i try to track camera, it goes to 'analyzing in background' then after 2 minutes or so it gives me the "timed out obtaining dynamiclink server connection" error pop-up.
Mac OSX 10.7.5
Using Adobe After effects CC
2 x 2.4ghx quad-core intel xeon
15gb ddr3 ram
I've uninstalled Logmein which appeared as a problem in one of the solutions but that hasn't changed anything. Don't have a firewall running. Tried uninstalling After Effects CS6 and After Effects CC and then reinstalling After Effects CC. Dynamiclinkmanager pops up in activity monitor intermittently, it comes and goes repeatedly when i try to 'Track Camera' but never shows any actual use of memory.
Is anyone able to offer help?
Could it be some confusion in preferences / library files between my CS6 installs and CC installs?
Thanks in advanceRefer to this:
http://myleniumerrors.com/2013/01/27/25-101-4/
Mylenium -
Running OES2P3 cifs on SLES10SP4. This server is on it's own subnet
connected via a router to the other subnets, with the rest of the
servers. Name resolution and CIFS file access does work, but browsing
does not work. I found that the server registers the workstation
service with the WINS server, but not the server service. Adding a a
static WINS entry enables netbios name resolution. But due to the
unability to obtain a server list from the CIFS server (a packet trace
shows, that the request for the server list from the OES CIFS server is
answered by the server with an unspecified server error) browsing does
not work.
Is browsing supported by OES2 CIFS like it is in SAMBA or does it need
another server as browser to allow browsing to work?
W. PrindlOkay, then we have the same knowledge status in that area.
I'll try to open a SR on this question.
W. Prindl
Peter Kuo wrote:
>Sorry for the delay - I fired up my VM that had CIFS configured for
>OES2 and you're right that there is no obvious setting for WINS; if
>its there, like you I cannot readily find it!
>
>The closest I can find is:
>
>
>"10.2.4 CIFS Server Broadcasts the Browser Packets every Twelve
>Minutes
>
>Cause: It is designed to broadcast every twelve minutes.
>
>Action: An entry with the NetBIOS Name and the respective server IP
>address in LMHOSTS file must be present on Windows client machine or
>WINS should be configured for both the server and the client."
>
>
>Oh, I did find (and that was what was in the mind when I first
>replied) that the CIFS Server Parameter page in iManager has this
>seting:
>
>
>"WINS IP Address
>The address of the WINS server that locates the PDC, if the PDC and
>the server running CIFS are on different subnets." -
After Effects, Track camera unable to obtain dynamic link server connection
This has been hit and miss. I am now consistenly getting a dynamic link server connection trying to use Track camera in After Effects.
64GB RAN
Windows 7 proffesional
i7 processor
NVIDIA GEFORCE TITAN
I have enabled all the recommended programs through my firewall. I see the dynamiclink server is running in my task manager, I have closed all other programs, no antivirus, I have restarted my computer, no luck with this.
Also to add additional information:
It seems that when I try to do replace with After Effects composition in Premiere Pro I am getting error: The importer reported a generic error
and also when I first launch After effects I am getting a failure to load a few plugins from CineForm including importercokkio wrote:
Hi guys,
I have the same problem but my system is:
Os X 10.9.5 - Macbook Pro Retina - NVIDIA GeForce GT 650M 1024 MB
After Effect 13.1.1.3
No antivirus or firewall running.
Any suggestion or the only way is to unistall, run adobe CC cleaner and reinstall? I'm in the middle of a project, quite in a hurry, and I prefer to avoid it if possible.
While I normally don't suggest too many changes in the middle of a project, have you considered updating to the latest version of AE? 13.2 released a couple of days ago. If the update messes you up, you were going to need to uninstall, run the CC Cleaner, and reinstall anyway... -
Weblogic Error(unable to start Admin Server)
"Error Message"
In the linux terminal I tried to start the Weblogic Adminserver. While starting the weblogic server it is showing the following error.
Java HotSpot(TM) Client VM (build 17.0-b17, mixed mode)
Starting WLS with line:
/mwhome/BEA/Middleware/jdk160_21/bin/java -client -Xms768m -Xmx1536m -XX:PermSize=512m -XX:MaxPermSize=1024m -Dweblogic.Name=AdminServer -Djava.security.policy=/mwhome/BEA/Middleware/wlserver_10.3/server/lib/weblogic.policy -Xverify:none -da -Dplatform.home=/mwhome/BEA/Middleware/wlserver_10.3 -Dwls.home=/mwhome/BEA/Middleware/wlserver_10.3/server -Dweblogic.home=/mwhome/BEA/Middleware/wlserver_10.3/server -Dcommon.components.home=/mwhome/BEA/Middleware/oracle_common -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=/mwhome/BEA/Middleware/user_projects/domains/soa_domain -Djrockit.optfile=/mwhome/BEA/Middleware/oracle_common/modules/oracle.jrf_11.1.1/jrocket_optfile.txt -Doracle.server.config.dir=/mwhome/BEA/Middleware/user_projects/domains/soa_domain/config/fmwconfig/servers/AdminServer -Doracle.domain.config.dir=/mwhome/BEA/Middleware/user_projects/domains/soa_domain/config/fmwconfig -Digf.arisidbeans.carmlloc=/mwhome/BEA/Middleware/user_projects/domains/soa_domain/config/fmwconfig/carml -Digf.arisidstack.home=/mwhome/BEA/Middleware/user_projects/domains/soa_domain/config/fmwconfig/arisidprovider -Doracle.security.jps.config=/mwhome/BEA/Middleware/user_projects/domains/soa_domain/config/fmwconfig/jps-config.xml -Doracle.deployed.app.dir=/mwhome/BEA/Middleware/user_projects/domains/soa_domain/servers/AdminServer/tmp/_WL_user -Doracle.deployed.app.ext=/- -Dweblogic.alternateTypesDirectory=/mwhome/BEA/Middleware/oracle_common/modules/oracle.ossoiap_11.1.1,/mwhome/BEA/Middleware/oracle_common/modules/oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol|oracle.fabric.common.classloaderurl.handler|oracle.fabric.common.uddiurl.handler|oracle.bpm.io.fs.protocol -Dweblogic.jdbc.remoteEnabled=false -da:org.apache.xmlbeans... -Dsoa.archives.dir=/mwhome/BEA/Middleware/Oracle_SOA1/soa -Dsoa.oracle.home=/mwhome/BEA/Middleware/Oracle_SOA1 -Dsoa.instance.home=/mwhome/BEA/Middleware/user_projects/domains/soa_domain -Dtangosol.coherence.clusteraddress=227.7.7.9 -Dtangosol.coherence.clusterport=9778 -Dtangosol.coherence.log=jdk -Djavax.xml.soap.MessageFactory=oracle.j2ee.ws.saaj.soap.MessageFactoryImpl -Dweblogic.transaction.blocking.commit=true -Dweblogic.transaction.blocking.rollback=true -Djavax.net.ssl.trustStore=/mwhome/BEA/Middleware/wlserver_10.3/server/lib/DemoTrust.jks -Dem.oracle.home=/mwhome/BEA/Middleware/oracle_common -Djava.awt.headless=true -Dums.oracle.home=/mwhome/BEA/Middleware/Oracle_SOA1 -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=/mwhome/BEA/Middleware/patch_wls1034/profiles/default/sysext_manifest_classpath:/mwhome/BEA/Middleware/patch_ocp360/profiles/default/sysext_manifest_classpath weblogic.Server
<Sep 8, 2011 5:41:07 PM IST> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Sep 8, 2011 5:41:07 PM IST> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Sep 8, 2011 5:41:07 PM IST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 17.0-b17 from Sun Microsystems Inc.>
<Sep 8, 2011 5:41:07 PM IST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.4.0 Fri Dec 17 20:47:33 PST 2010 1384255 >
<Sep 8, 2011 5:41:09 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Sep 8, 2011 5:41:09 PM IST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Sep 8, 2011 5:41:09 PM IST> <Notice> <LoggingService> <BEA-320400> <The log file /mwhome/BEA/Middleware/user_projects/domains/soa_domain/servers/AdminServer/logs/AdminServer.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Sep 8, 2011 5:41:09 PM IST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to /mwhome/BEA/Middleware/user_projects/domains/soa_domain/servers/AdminServer/logs/AdminServer.log00033. Log messages will continue to be logged in /mwhome/BEA/Middleware/user_projects/domains/soa_domain/servers/AdminServer/logs/AdminServer.log.>
<Sep 8, 2011 5:41:09 PM IST> <Notice> <Log Management> <BEA-170019> <The server log file /mwhome/BEA/Middleware/user_projects/domains/soa_domain/servers/AdminServer/logs/AdminServer.log is opened. All server side log events will be written to this file.>
Sep 8, 2011 5:41:10 PM oracle.security.jps.internal.credstore.ssp.CsfWalletManager openWallet
WARNING: Opening of wallet based credential store failed. Reason java.io.IOException: PKI-02002: Unable to open the wallet. Check password.
oracle.security.jps.service.credstore.CredStoreException: JPS-01050: Opening of wallet based credential store failed. Reason java.io.IOException: PKI-02002: Unable to open the wallet. Check password.
at oracle.security.jps.internal.credstore.ssp.CsfWalletManager.openWallet(CsfWalletManager.java:177)
at oracle.security.jps.internal.credstore.ssp.SspCredentialStore.doInit(SspCredentialStore.java:217)
at oracle.security.jps.internal.credstore.ssp.SspCredentialStore.<init>(SspCredentialStore.java:139)
at oracle.security.jps.internal.credstore.ssp.SspCredentialStore.<init>(SspCredentialStore.java:126)
at oracle.security.jps.internal.credstore.ssp.SspCredentialStoreProvider.getInstance(SspCredentialStoreProvider.java:114)
at oracle.security.jps.internal.credstore.ssp.SspCredentialStoreProvider.getInstance(SspCredentialStoreProvider.java:52)
at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.findServiceInstance(ContextFactoryImpl.java:139)
at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:170)
at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:191)
at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:132)
at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:127)
at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:798)
at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:792)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:792)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:289)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:282)
at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:261)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at java.lang.Class.newInstance0(Class.java:355)
at java.lang.Class.newInstance(Class.java:308)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1339)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
<Sep 8, 2011 5:41:10 PM IST> <Error> <Security> <BEA-090892> <The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider>
<Sep 8, 2011 5:41:10 PM IST> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider
weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1398)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
Truncated. see log file for complete stacktrace
Caused By: oracle.security.jps.JpsRuntimeException: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:291)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:282)
at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:261)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
Truncated. see log file for complete stacktrace
Caused By: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider
at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:847)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:289)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:282)
at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:261)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
Truncated. see log file for complete stacktrace
Caused By: java.security.PrivilegedActionException: oracle.security.jps.JpsException: [PolicyUtil] Unable to obtain default JPS Context!
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:792)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:289)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:282)
at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:261)
Truncated. see log file for complete stacktrace
Caused By: oracle.security.jps.JpsException: [PolicyUtil] Unable to obtain default JPS Context!
at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:808)
at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:792)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:792)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:289)
Truncated. see log file for complete stacktrace
Caused By: oracle.security.jps.service.credstore.CredStoreException: JPS-01050: Opening of wallet based credential store failed. Reason java.io.IOException: PKI-02002: Unable to open the wallet. Check password.
at oracle.security.jps.internal.credstore.ssp.CsfWalletManager.openWallet(CsfWalletManager.java:177)
at oracle.security.jps.internal.credstore.ssp.SspCredentialStore.doInit(SspCredentialStore.java:217)
at oracle.security.jps.internal.credstore.ssp.SspCredentialStore.<init>(SspCredentialStore.java:139)
at oracle.security.jps.internal.credstore.ssp.SspCredentialStore.<init>(SspCredentialStore.java:126)
at oracle.security.jps.internal.credstore.ssp.SspCredentialStoreProvider.getInstance(SspCredentialStoreProvider.java:114)
Truncated. see log file for complete stacktrace
>
<Sep 8, 2011 5:41:10 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<Sep 8, 2011 5:41:10 PM IST> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
<Sep 8, 2011 5:41:10 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
"Hope I'll get a solution soon"You probably run the WebLogic once as the super user and are now trying to run it as another.
you could issue a chown or chmod -R 777
Also a remark that provided here: Opening of wallet based credential store failed. Reason java.io.IOException
"It appears the my config/fmwconfig/cwallet.sso file was corrupted, possibly by a previous WebLogic crash. The cwallet.sso file in my fmwconfig directory was only 77bytes, but it should have been larger. I was able to find a previous version of the cwallet.sso file in the /tmp/cred* directories, and restored the file. That allowed me to start up WebLogic, but I had lost some data in cwallet.sso that I needed to re-enter in FMW Control." -
Unable to start admin server instance
Hi Experts,
can anyone help me out to find out the resolution of the issue as i am not able to bring my admin instance up. It is giving below exception. I am using weblogic 11g on Linux platform.
==============
<Sep 22, 2011 11:45:38 AM IST> <Notice> <Log Management> <BEA-170019> <The server log file /u04/Oracle/Middleware/user_projects/domains/ecm_domain/servers/AdminServer/logs/AdminServer.log is opened. All server side log events will be written to this file.>
java.security.AccessControlException: access denied (oracle.security.jps.service.credstore.CredentialAccessPermission context=SYSTEM,mapName=fks,keyName=current.key read)
at java.security.AccessControlContext.checkPermission(AccessControlContext.java:323)
at java.security.AccessController.checkPermission(AccessController.java:546)
at oracle.security.jps.util.JpsAuth$AuthorizationMechanism$3.checkPermission(JpsAuth.java:379)
at oracle.security.jps.util.JpsAuth.checkPermission(JpsAuth.java:439)
at oracle.security.jps.util.JpsAuth.checkPermission(JpsAuth.java:460)
at oracle.security.jps.internal.credstore.util.CsfUtil.checkPermission(CsfUtil.java:611)
at oracle.security.jps.internal.credstore.ssp.SspCredentialStore.getCredential(SspCredentialStore.java:409)
at oracle.security.jps.internal.keystore.util.KeyStoreServiceUtil.getCurrentMasterKeyAlias(KeyStoreServiceUtil.java:260)
at oracle.security.jps.internal.keystore.util.KeyStoreServiceUtil$3.run(KeyStoreServiceUtil.java:363)
at oracle.security.jps.internal.keystore.util.KeyStoreServiceUtil$3.run(KeyStoreServiceUtil.java:361)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.internal.keystore.util.KeyStoreServiceUtil.getMasterKey(KeyStoreServiceUtil.java:361)
at oracle.security.jps.internal.keystore.file.FileKeyStoreManager$3.run(FileKeyStoreManager.java:321)
at oracle.security.jps.internal.keystore.file.FileKeyStoreManager$3.run(FileKeyStoreManager.java:319)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.internal.keystore.file.FileKeyStoreManager.openKeyStore(FileKeyStoreManager.java:319)
at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.doInit(FileKeyStoreServiceImpl.java:101)
at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:73)
at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:63)
at oracle.security.jps.internal.keystore.KeyStoreProvider.getInstance(KeyStoreProvider.java:157)
at oracle.security.jps.internal.keystore.KeyStoreProvider.getInstance(KeyStoreProvider.java:64)
at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.findServiceInstance(ContextFactoryImpl.java:139)
at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:170)
at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:191)
at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:132)
at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:127)
at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:798)
at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:792)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:792)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:289)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:282)
at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:261)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at java.lang.Class.newInstance0(Class.java:355)
at java.lang.Class.newInstance(Class.java:308)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1339)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
<Sep 22, 2011 11:45:39 AM IST> <Error> <Security> <BEA-090892> <The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider>
<Sep 22, 2011 11:45:39 AM IST> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider
weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1398)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
Truncated. see log file for complete stacktrace
Caused By: oracle.security.jps.JpsRuntimeException: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:291)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:282)
at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:261)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
Truncated. see log file for complete stacktrace
Caused By: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider
at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:847)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:289)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:282)
at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:261)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
Truncated. see log file for complete stacktrace
Caused By: java.security.PrivilegedActionException: oracle.security.jps.JpsException: [PolicyUtil] Unable to obtain default JPS Context!
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:792)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:289)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:282)
at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:261)
Truncated. see log file for complete stacktrace
Caused By: oracle.security.jps.JpsException: [PolicyUtil] Unable to obtain default JPS Context!
at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:808)
at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:792)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:792)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:289)
Truncated. see log file for complete stacktrace
Caused By: java.security.AccessControlException: access denied (oracle.security.jps.service.credstore.CredentialAccessPermission context=SYSTEM,mapName=fks,keyName=current.key read)
at java.security.AccessControlContext.checkPermission(AccessControlContext.java:323)
at java.security.AccessController.checkPermission(AccessController.java:546)
at oracle.security.jps.util.JpsAuth$AuthorizationMechanism$3.checkPermission(JpsAuth.java:379)
at oracle.security.jps.util.JpsAuth.checkPermission(JpsAuth.java:439)
at oracle.security.jps.util.JpsAuth.checkPermission(JpsAuth.java:460)
Truncated. see log file for complete stacktrace
>
<Sep 22, 2011 11:45:39 AM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
=========
thx in advance.
AjayTry:
1)
/oracle/Oracle_IDM1/common/bin/pack.sh -domain=/oracle/user_projects/domains/idm_domain -template=/tmp/idm_domain2.jar -template_name="idm_domain" -managed="true"
2)
/oracle/Oracle_IDM1/common/bin/unpack.sh -domain=/oracle/user_projects/domains/idm_domain -template=/tmp/idm_domain2.jar
Записки на полях внедрения: java.security.AccessControlException: access denied (oracle.security.jps.service.credstore.C… -
Unable to Obtain a Connection to Hyperion Essbase from Planning Application
Dear All,
I have installed FDM+Foundation+HFM+Essbase+Planning 11.1.1.3 (Tomcat)
I have stacked with the following problem:
when I try to open my data form, I am getting
“Unable to obtain a connection to Hyperion Essbase. If this problem persists, please contact your administrator”
Validate Database Connection & Validate Essbase Connection are successful throw Manage Data Source menu
Essbase user has admin privileges
In EAS console I can make myself sure, that my application is running
Data Form is valid (verified in Preview screen in Data Form wizard)
Can somebody help me with it?
Best Regards,
SiarheiThanks, John
Summary
Symptoms
When attempting to connect to Hyperion Planning as the admin user, the following error occurs:
Unable to obtain a connection to Hyperion Essbase. If the problem persists, please contact your administrator'
Cause
Hyperion Planning web accesses the application by making a connection to the Planning metadata in the relational repository (via Relational repository settings) and also to Essbase via the datasource settings.
Any Essbase connection issues indicate problems with the Essbase settings in the datasource or are related to the Essbase server.
Solution
- Edit the datasource via the Configuration Utility.
- Test the Essbase connection and make sure that the user used to make the connection is valid and has admin rights to Essbase.
- Restart the Hyperion Planning service once the Essbase user has been given the correct access rights.
- Login to the Essbase Administration Services (EAS) console and right click on the Essbase server name node -> Refresh security from Shared Services
- Expand the applications node (under the Essbase server name node) and check that there is an application with exactly the same name as the Planning application.
Note: Go to section 'manually recreating a Planning application in Hyperion Essbase, if the Planning application is missing in the above step.
- Login to the application in Hyperion Planning web.
Manually recreating a Planning application in Essbase:
- Login to the EAS console as admin (the Essbase user used by admin must have Essbase administrator rights)
- Go to Essbase servers -> your Essbase server name -> right click on applications -> Create application -> Using Block Storage and enter the exact Hyperion Planning Application name then click on ok.
Note: The above step will only create the application shell without the databases.
- Login to the application in Hyperion Planning web as admin and go to Administration menu -> Manage Database -> select database and filters (to create filter access to Essbase) and Refresh (refresh will also recreate the databases if they don't exist)
Best Regards,
Siarhei -
Unable to obtain inventory from some XP PC's
I am unable to obtain version 7.5 inventory info from a handful of XP PC's. I believe it's something to do with this WifName registry entry which is blank on a PC where I cannot obtain inventory.
I have uninstalled the 7.5 client, deleted the registry contents as it leaves them there, deleted the Asset Management firectory from within program files as it doesn't completely uninstall the directory either, and re-installed from scratch. After the new installation the WifName registry entry is still blank.
I am runing the command manually "cclient.exe scannow:edit". This all works on my PC logged on as me but not on another Pc logged on as me. This rules out the Asset Management server, policies, rights to the registry etc which have all been suggested as problms in previous posts.
The ZAM Client and Collector have full access privileges to the ZAM
portion of the Program Files directory as well as to their own portion of
the registry at HKEY_LOCAL_MACHINE\SOFTWARE\Tally Systems
Corp.\TSCensus\CollectionClient.
The ZAM collection client is set in the services to run as a local
system account on ALL PC's.
I believe I need to know why this entry is blank to fix the problem.
Secondly, when I run the Setup.exe program to install the client, it asks for my Server name from which it populates cps.ini like so:-
[CollectionServer]
Insight
[CollectionClient]
InBoxCC
however when I run the .msi that I found today, it doesn't ask for any info and the cps.ini file looks like this:-
[CollectionServer]
[CollectionClient]
Is this significant?
My colw32.log file also contains the message "failed to get WIF path", all the time on the PC that fails but only sometimes on my PC.
Thanks
LennyFound out what the problem was. The Windows firewall was switched on for the PC's that didn't work.
Lenny -
Re: Unable to obtain reference to plan in distributedenvironment
An interface is just a definition of attributes and methods it contains no
code.
The code is in the class that implements the interface therefore even if you
can pass an objet
reference as an interface you better be sure that the object that will use
it has access to the
implementation. It works when it is not distributed because all of the code
is on the client therefore
is accessible. Once distributed the partition containing PlanSO does not
have the library wich
contains the code for PlanTester therefore it cannot execute code in
PlanTester. If you
want to do this and not put PlanTester in the same Plan as PlanSO I think
you can copy the library wich
contains the code for PlanTester on the server partition and it will not
give you a deserialization error
because now it can find the executable code.
This could also probably happen with inheritance for example you have a
class defined in plan A (ClassA)
and plan B (wich has plan A supplier) contains a sub-class of ClassA
(ClassB). Now in one partition you
create a ClassB then pass it to another partition in a method call of
signature Something( p1 : ClassA ).
ClassB will fit in ClassA so you can do this (it will compile). But if the
partition on wich you are calling
Something() does not have access to the code in plan B then you will get a
deserialization error.
Hope this helps a little.
Christian Boult ([email protected])
Programmeur - Analyste
Influatec inc.
-----Original Message-----
From: [email protected] <[email protected]>
To: [email protected] <[email protected]>
Date: Friday, April 16, 1999 8:25 AM
Subject: Unable to obtain reference to plan in distributed environment
>
Forte Folks,
I have run across a supplier plan problem that I think I can explain, but
would like confirmation and maybe further explanation on.
The scenario:
I have three plans (PlanClasses, PlanSO, and PlanTester).
PlanClasses has classes that PlanSO and PlanTester use, including an
interface called Observer.
PlanSO has the Service Object and the class that the service object
implements. It has PlanClasses as a supplier.
PlanSO has a method called subscribe(Observer client).
PlanTester is a test client. It has PlanClasses as a supplier. It
implements the Observer interface, and calls the subscribe method on the
PlanSO passing itself as an Observer to the SO.
Anybody see the problem yet?
I run this scenario locally and everything is dandy.
I run this scenario distributed and I get a deserialization exception. The
PlanSO cannot deserialize the test client object that I had passed as an
Observer because it cannot find a reference to the PlanTester plan.
If I put the test client class in the PlanSO plan and partition the
application the same way, it works. The service object needed a reference
to the test client class even though it is getting passed as an Observer
interface.
Has anybody run into this before? Can anybody give me further details on
why forte has this problem?
I get the same exception whether the distrubted runtime property on the
client is allowed or not allowed. If it is set to not allowed, shouldn't
only an OID be sent across, and no serialization need take place? If the
object is serialized, I guess it does make sense that you would need the
details of the implementation of the interface (da class) to deserialized
it.
Note: I used this pattern instead of Forte events because I am going to
expose the SO as a CORBA interface. Right now, for the forte clients that
use the SO, I am registering for forte events which are posted by the SO to
get around this problem.
Thanks for any responses,
Chris Henson
www.atgs.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>An interface is just a definition of attributes and methods it contains no
code.
The code is in the class that implements the interface therefore even if you
can pass an objet
reference as an interface you better be sure that the object that will use
it has access to the
implementation. It works when it is not distributed because all of the code
is on the client therefore
is accessible. Once distributed the partition containing PlanSO does not
have the library wich
contains the code for PlanTester therefore it cannot execute code in
PlanTester. If you
want to do this and not put PlanTester in the same Plan as PlanSO I think
you can copy the library wich
contains the code for PlanTester on the server partition and it will not
give you a deserialization error
because now it can find the executable code.
This could also probably happen with inheritance for example you have a
class defined in plan A (ClassA)
and plan B (wich has plan A supplier) contains a sub-class of ClassA
(ClassB). Now in one partition you
create a ClassB then pass it to another partition in a method call of
signature Something( p1 : ClassA ).
ClassB will fit in ClassA so you can do this (it will compile). But if the
partition on wich you are calling
Something() does not have access to the code in plan B then you will get a
deserialization error.
Hope this helps a little.
Christian Boult ([email protected])
Programmeur - Analyste
Influatec inc.
-----Original Message-----
From: [email protected] <[email protected]>
To: [email protected] <[email protected]>
Date: Friday, April 16, 1999 8:25 AM
Subject: Unable to obtain reference to plan in distributed environment
>
Forte Folks,
I have run across a supplier plan problem that I think I can explain, but
would like confirmation and maybe further explanation on.
The scenario:
I have three plans (PlanClasses, PlanSO, and PlanTester).
PlanClasses has classes that PlanSO and PlanTester use, including an
interface called Observer.
PlanSO has the Service Object and the class that the service object
implements. It has PlanClasses as a supplier.
PlanSO has a method called subscribe(Observer client).
PlanTester is a test client. It has PlanClasses as a supplier. It
implements the Observer interface, and calls the subscribe method on the
PlanSO passing itself as an Observer to the SO.
Anybody see the problem yet?
I run this scenario locally and everything is dandy.
I run this scenario distributed and I get a deserialization exception. The
PlanSO cannot deserialize the test client object that I had passed as an
Observer because it cannot find a reference to the PlanTester plan.
If I put the test client class in the PlanSO plan and partition the
application the same way, it works. The service object needed a reference
to the test client class even though it is getting passed as an Observer
interface.
Has anybody run into this before? Can anybody give me further details on
why forte has this problem?
I get the same exception whether the distrubted runtime property on the
client is allowed or not allowed. If it is set to not allowed, shouldn't
only an OID be sent across, and no serialization need take place? If the
object is serialized, I guess it does make sense that you would need the
details of the implementation of the interface (da class) to deserialized
it.
Note: I used this pattern instead of Forte events because I am going to
expose the SO as a CORBA interface. Right now, for the forte clients that
use the SO, I am registering for forte events which are posted by the SO to
get around this problem.
Thanks for any responses,
Chris Henson
www.atgs.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/> -
RMI Activatable (unable to obtain activation system)
Hello, I am new to forum... I have a simple rmi activation program.. Before writing program,I have checked some books and example in the sun site...
Before starting to program, I command "start rmiregistry" and
rmid -J-Djava.security.policy=rmi.policy -J-Dsun.rmi.activation.execPolicy=none
Up to here ,everything is Ok.
However,when I started to Setup program .I got the error Unable to obtaion activation system....
Following my codes:
my remote object...package impl.server;
import java.rmi.*;
import araclass.Kitapcik;
import araclass.Soru;
public interface Sinav extends Remote{
Kitapcik bilgileriGetir() throws RemoteException;
String sorulariGetir(Soru soru) throws RemoteException;
package impl.activate;
import impl.server.Sinav;
import java.rmi.*;
import java.rmi.activation.*;
import araclass.Kitapcik;
import database.Database;
import araclass.Soru;
public class SinavYordam extends Activatable implements Sinav{
Database data;
public SinavYordam(ActivationID id,MarshalledObject data) throws RemoteException{
super(id,0);
public Kitapcik bilgileriGetir(){
data=new Database();
data.baglan();
Kitapcik kitap=data.kitapcikGetir(2);
data.kapat();
return kitap;
public String sorulariGetir(Soru soru){
String sor="";
data=new Database();
data.baglan();
sor=data.soruGetir("Soru_Getir", soru.soru_no, soru.tabloAdi);
data.kapat();
return sor;
public String[] siklariGetir(Soru soru){
String[] sik;
data=new Database();
data.baglan();
sik=data.siklariGetir("Soru_Getir", soru.soru_no, soru.tabloAdi);
data.kapat();
return sik;
}and lastly setup program,
import impl.server.Sinav;
import java.rmi.*;
import java.rmi.activation.*;
import java.util.Properties;
import java.util.prefs.Preferences;
public class SinavServer {
public SinavServer(){
public static void main(String[] args) throws Exception{
System.setSecurityManager(new RMISecurityManager());
Properties prop=new Properties();
prop.put("java.security.policy","/workspace1/SINAV");
ActivationGroupDesc.CommandEnvironment cmd=null;
ActivationGroupDesc grpdesc=new ActivationGroupDesc(prop,cmd);
ActivationGroupID id=ActivationGroup.getSystem().registerGroup(grpdesc);
String location="file:/workspace1/SINAV";
ActivationDesc desc=new ActivationDesc(id,"impl.activate.SinavYordam",location,null);
Sinav sin=(Sinav)Activatable.register(desc);
Naming.rebind("Sinav", sin);
} Thanks in advance..Actually, I got two diffirent exception in an interesting order.. I mean one day I got the following the error;
Exception in thread "main" java.Access.Security.ControlException: access denied <java.io.FilePermission \\c\workspace1\SINAV read>
at java.security.AccessControlContext.checkPermissionthat goes on...
The other day ,
Unable to obtain activation system exception today I could not have got so far. If I got, I would post.
So anyone who I have an idea of this problem...
Thanks in advance... -
Log Viewer: Unable to obtain a valid configuration - BAMRuntimeException
Hi All,
We have problems working with the Visual Administrator -> Log Viewer
tool.
excuting the Visual Administrator -> F:\usr\sap\<SID>\J(XXX)\j2ee\admin>go.bat
Login with the user Administrator.
Click On: Cluster -> PEP -> Server X X_XXXXX -> Services -> Log Viewer.
Them you get the following error:
Unable To Obtain a Valid Configuration ->
com.sapmarkets.bam.util.BAMRuntimeException
The Problem is in all our Portals System Landscape: DEV, QA, PRD.
Best Regards,
Erick IlarrazaHi All,
We solved the problem. You have to deleted the old archive files. **J2ee/Cluster/Server<n>/log/archive.
Them the Log Viewer works.
Best Regards,
Erick Ilarraza -
Unable to obtain File lock on examplesServer.lok
Hi experts,
Pls help me..I am new to WebLogic..I have good exp on other App servers..
after installation,when i click quickstart ..the console showing this error.. i have done googling on this..but i haven't find proper answer..pls help me
weblogic.management.ManagementException: Unable to obtain File lock on C:\bea\wlserver_10.3\samples\domains\wl_server\servers\examplesServer\tmp\examplesServer.lok
: java.io.FileNotFoundException: C:\bea\wlserver_10.3\samples\domains\wl_server\servers\
examplesServer\tmp\examplesServer.lok (Access is denied)
at weblogic.management.internal.ServerLocks.getServerLock(ServerLocks.java:1
51)
at weblogic.management.internal.ServerLocks.getServerLock(ServerLocks.java:5
8)
at weblogic.management.internal.DomainDirectoryService.start(DomainDirectory
Service.java:73)
at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager
.java:459)
at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServices
Manager.java:164)
at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:711)
at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:482)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:440)
at weblogic.Server.main(Server.java:67)
>
Awaiting replyFirst make Sure that you have Read/Write Permission of this file "examplesServer.lok"
ls -lrt
If you already have all the Permissions on this file still if you are facing this issue then....Just Delete the file "examplesServer.lok" from "C:\bea\wlserver_10.3\samples\domains\wl_server\servers\examplesServer\tmp\" location and then restart your Server. As soon as you start your Server It will create a New File like that.
Thanks
Jay SenSharma
http://jaysensharma.wordpress.com (WebLogic Wonders Are Here)
Maybe you are looking for
-
Can I have 2 displays hooked up to my macbook pro via usb and display port
I have a Macbok Pro (15 inch 2011) can I hook a monitor via USB (mirrored) and hook a second one via displayport to dvi as extendd, its because i want 2 bigger monitors on my desk, thank you all info appreciated
-
About the Reader 9.5.2 Update
Hi Everybody: Yesterday, Adobe Reader successfully updated to 9.5.2 - CPSID_83708 as correctly shown on my "Add or remove programs" feature. However, the app still shows version 9.5.1 in the Help > About Adobe Reader 9... page, same as half of the pl
-
720 x 480 DV sequence export aspect ratio always wrong. How come?
Finally finished editing one of the sequences and want to export and test it, But no matter what settings in QuickTime Conversion (or just QuickTime Movie) parameters I do (e.g., Size), the exported file always seems to be in the wrong aspect ratio.
-
Calendar not displaying events !?
Good morning, In my Calendar on my Q5, events display sometime with delay when I open the app. But after few manipulations (view change, day selection) events disappear and app sometime freeze - ??? Any help welcome ! For info : My Link account appea
-
Font Book crashes when trying to remove corrupt fonts
I have recently upgraded to Snow Leopard and am having problems with my fonts. After installing some of my previously used fonts, some of them didn't pass validation. I don't mind removing them - I barely use 1% of the fonts I have, but when I run Fo