Unable to open a specific xlsx file
Hello,
I am unable to open a specific xlsx file on my iPhone 5 which has iOS 7.0.4 in quick look.
I able to open other .xlsx and this specific file can be opened as a .xls
Unfortunately, I am unable to post this file due to security issues.
Would anyone know if there is a reason why I cannot open this as a .xlsx?
So there are two .xlsm files that I am using.
Both of which have the same code.
It is just the name of the reports which are different.
The macro code is used to email this report to the user which is on an active worksheet.
Once this has been emailed, we are able to open the report generated by one .xlsm code that spits it out as .xlsx but not the other on the iPhone.
I am able to save the other report as a .xls and send it across and I can preview it in Quick Look.
Unfortunately, the users do not possess the Numbers app.
Similar Messages
-
When I double click on an .xls or .xlsx file Excel will open up, but I never see the file open up.
If I right click on the excel file and say open with excel I then get the following error:
"Windows cannot find file c:\test\test.xls. Make sure you typed the name correctly, and then try again...."
Everywhere I looked seems to indicate the file associations was messed up so per a technical document I deleted the .xls and .xlsx association and then ran the Office 2007 repair and rebooted. Still not working even after office puts the .xls and .xlsx
file associations in.
Here is what I see the in .xls and .xlsx for the &Open action:
Application: "C:\Program Files\Microsoft Office\Office12\EXCEL.EXE" /e
UseDDE: Checked
DDE Message: [open("%1")]
Any guidance would be appreciated!
GregIn the ened I had to go into Excel Options, Advanced, General, and uncheck the "ignore other applicaitons....". BUT this only worked after doing the Office 2007 repair.
-
i saved a word file onto my imac. when i go to open file in documents with pages the file is grey and unable to open. the workable files are highlighted in bold. is there a way to open this file????
THis is safe for Mac's? Sorry, I have just never heard of this site before.
And there are literally tens of thousands of sites of which I've not heard, too. Not this one.
It's legit. There are lots of links in Apple Support Communities to the LibreOffice web site, as well as others that are legitimate open-source developers of options to buying MS Office, such as NeoOffice and OpenOffice. I have Open Office installed on one of my older Macs that can't run Office 2011 and it is rock-solid.
I've been here too long to start posting bogus urls now. -
"Unable to open a virtual memory file" and "Unable to initialize Photoshop" errors
Hi
I installed Photoshop CS6 64-bit on Windows 7 SP1 64-bit.
When it starts, these two messages are displayed:
Unable to open a virtual memory file because the file is locked. You do not have permission or the file is being used by another program. ...
Unable to initialize Photoshop because the file is locked. You do not have permission or the file is being used by another program. ...
How come?
Thanks
ByeIn other words, I have installed Photoshop CS6 64-bit (using the default directory) on Windows 7 SP1 64-bit.
My computer has 4 GB of RAM and a virtual memory file of 6644 MB.
When it starts, the two above messages are displayed also with an account of Administrator type?
How come?
Thanks
Bye -
Open password-protected XLSX files in Numbers '09
Hi @ all,
I've just started using Numbers a few days ago. I want to open password-protected xlsx-files. Numbers refuses opening it.
Why?
Chears
StefanThis is true. However as a workaround I found out the Quick View function allows you to type in the password and then at least get a preview of its contents. Note that this was not the case earlier on Snow Leopard (I recently upgraded to Mountain Lion).
Pierre -
BUG - Unable to open Canon CR2 RAW file from G1 X, ACR 7.0.0.308
Unable to open Canon raw CR2 file from G1 X (Photoshop cannot open this file), CR2 file from 1DSIII opens ok.
Windows 7 X64, Nvidia 2000D, Photoshop CS6 X64 BETA.That is correct. the G1 X will be supported in a 7.0 dot release. The camera is currently supported in Lightroom 4.
Camera Raw plug-in | Supported cameras
Note: These cameras are supported in Adobe Photoshop Lightroom 4.0, but not in Camera Raw 7.0. These cameras will be supported in the next dot release of Camera Raw 7. -
I am unable to open canon 6d raw files w/ elements 11
I am unable to open canon 6d raw files w/ elements 11. It seems that camera raw 7.1.0.384 is installed. I tried to update and nothing happens.Any help please?
Sometimes the Adobe servers can get busy; so try again from Expert Mode:
Help >> Updates
You should be able to select ACR 7.4 (see image) and then click the update button. -
Unable to open USB port device file: Permission denied
I have an up-to-date system (full "pacman -Syu" yesterday), I am in a "lp" group and the printer (Canon Pixma MP270) started to give "Unable to open USB port device file: Permission denied" error, although in the past it worked and still works in Windows. Doesn't anybody have a similar problem?
Thanks for reply.
CUPS worked, I could use CUPS-PDF and localhost:631 was accessible and working.
Today I managed to print again. I did "pacman -Rcsn cups" and reinstalled it again.
My printer is Canon Pixma MP270 and so far it wasn't the best choice for Arch Linux—scanning works fine but it's like throwing a coin when it comes to printing. I've written a simple PKGBUILD for installing its printing driver as a regular package, but I don't know what to set as a license.
pkgname=mp270-printer
pkgver=3.20
pkgrel=1
pkgdesc="Canon Pixma MP270 printer driver"
arch=('i686')
url="http://software.canon-europe.com/products/0010753.asp"
license=('unknown')
depends=('libpng12' 'gtk2' 'popt')
makedepends=('deb2targz')
source=(http://files.canon-europe.com/files/soft37268/software/MP270_debian_driver_pack.tar)
md5sums=('d26c36e2d1799ddc09e644dc7765f0a3')
build() {
cd $srcdir
tar xzf cnijfilter-mp270series-$pkgver-1-i386-deb.tar.gz
cd cnijfilter-mp270series-$pkgver-1-i386-deb/packages
deb2targz *
tar xzf cnijfilter-common_$pkgver-1_i386.tar.gz
tar xzf cnijfilter-mp270series_$pkgver-1_i386.tar.gz
ln -s /usr/lib/libtiff.so usr/lib/libtiff.so.4
package () {
cd $srcdir/cnijfilter-mp270series-$pkgver-1-i386-deb/packages
cp -r usr $pkgdir/ -
Unable to open Java Webstart jnlp files in Mavericks
Since upgrading to Mavericks I am unable to open Java webstart jnlp files in Safari.
When trying to open the specified URL with the jnlp file, nothing happens, the download simply will not start.
Tried different security settings in Safari & Java control panel
It affects all applications using webstart.
Java 7.45 & iOS 10.9Can you check which version of Camera Raw is installed - it needs to be version 6.2 or later for the 60D
Open Full edit on the menu bar click:
Help >> About Plug-In >> Camera Raw
Press Esc to close the pop-up.
-
Opening a Excel xlsx file in numbers 08
Hello,
How do I open a Microsoft .xlsx file in numbers 08? or do i need to update to numbers 09?Ask to badunit which wrote that he may open this kind of files.
I was never able to open those which I received.
As my rule is to trash *********'s files when I receive some of them, for me it's definitely not a problem
It appears that the automatic vocabulary filter was enhanced. It refuses the word which I am acustomed to use to name the Excel's editor
Yvan KOENIG (VALLAURIS, France) dimanche 6 septembre 2009 12:52:58 -
MDT 2012 - Update Deploymentshare: Unable to open the specified WIM file
Hi @ all
wie have updated our Litetouch boot image using DISM and know we try to update the deploymentshare but we get the following error.
=== Making sure the deployment share has the latest x86 tools ===
=== Processing LiteTouchPE (x86) boot image ===
Building requested boot image profile.
System.Management.Automation.CmdletInvocationException: Unable to open the specified WIM file. ---> System.Exception: Unable to open the specified WIM file. ---> System.ComponentModel.Win32Exception: The system cannot find the file specified
--- End of inner exception stack trace ---
at Microsoft.BDD.Core.BDDWimFile..ctor(String wimPath, Boolean forUpdate)
at Microsoft.BDD.PSSnapIn.UpdateDeploymentPoint.UpdateBootImage(String template, String platform, String dpPath, Boolean createISO, String isoName)
at Microsoft.BDD.PSSnapIn.UpdateDeploymentPoint.ProcessRecord()
at System.Management.Automation.CommandProcessor.ProcessRecord()
--- End of inner exception stack trace ---
at System.Management.Automation.Internal.PipelineProcessor.SynchronousExecuteEnumerate(Object input, Hashtable errorResults, Boolean enumerate)
at System.Management.Automation.Runspaces.LocalPipeline.InvokeHelper()
at System.Management.Automation.Runspaces.LocalPipeline.InvokeThreadProc()
Unable to open the specified WIM file? The image ist is stil in the boot folder.
Anybody an idea or an solution for that problem?
Thank's
AdrianI had installed ADK to utilize the latest and greatest DISM tool. That broke WAIK and the boot.wim could not be found when updating the deployment shares. Thanks for the pointer...
Paul Prindle MCP, A+
That is because WAIK and ADK are unsupported as side-by-side installations.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”
How to ask a question that is fixable. -
Hi @all,
i've read all the dócumentations i've found in the net but unfortunatly the Indexing of my filestored documents fails every time...
So what i've done is the following:
--Step 1 Create User
--The following SQL command creates a user called MYUSER with a password of myuser_password:
drop user textuser;
CREATE USER TEXTUSER IDENTIFIED BY TEXTUSER;
--Step 2 Grant Roles
--The following SQL command grants the required roles of RESOURCE,CONNECT, and CTXAPP to TEXT_USER:
GRANT RESOURCE, CONNECT, CTXAPP TO textuser;
GRANT EXECUTE ON CTX_CLS TO textuser;
GRANT EXECUTE ON CTX_DDL TO textuser;
GRANT EXECUTE ON CTX_DOC TO textuser;
GRANT EXECUTE ON CTX_OUTPUT TO textuser;
GRANT EXECUTE ON CTX_QUERY TO textuser;
GRANT EXECUTE ON CTX_REPORT TO textuser;
GRANT EXECUTE ON CTX_THES TO textuser;
begin
ctx_ddl.create_preference('COMMON_DIR','FILE_DATASTORE');
end;
begin
ctx_ddl.set_attribute('COMMON_DIR','PATH','/home/oracle/mydocs');
end;
begin
ctx_ddl.create_preference ('AUTO_DECT','INSO_FILTER');
end;
create table mytable(id number primary key, docs varchar2(2000));
insert into mytable values (111557,'Zwischenbericht.doc ');
commit;
create index myindex on mytable(docs)
indextype is ctxsys.context
parameters ('datastore COMMON_DIR');
select id,docs,score(1) from mytable where contains(docs, 'Dokumentation',1)>0;
returns NULL ROWS!!
select * from CTX_USER_INDEX_ERRORS;
DRG-11513: Datei /home/oracle/mydocs/Zwischenbericht1.doc kann nicht geöffnet oder geschrieben werden
(unable to open or write to file /home/oracle/mydocs/Zwischenbericht1.doc )
I gave an chmod 777 on the document "Zwischenbericht1.doc"
So what can i do?????
I use Oracle 10.2.0 on Suse Linux 9.2
I'm very happy about Ideas and helpfull advices.
Thanks a lot regards JuliusHallo Barbara,
thanks a lot for your help!!!
I've noticed that it is necessary to create the user textuser as ctxsys. So i've done like you recommended but unfortunately the result is the same.....
I added an utl_file Path to my SPFILE. (utl_file_dir= /home/oracle/mydocs) as you can see below. (is it necessary to something else to the spfile which i haven't noticed at all???
After that i tried to set up all by using sqlplus for having the possibility to show the results.
Below you can see the statements, the connect-Changes (ctxsys/textuser)
and the echo .
Do you or somebody else have an idea what i can do additionally to get this working???
Thanks a lot and regards Julius
oracle@scarlino:~/product/10.2.0/db_2/dbs> more spfileJULIUS2.ora
ð!
JULIUS2.__db_cache_size=71303168
JULIUS2.__java_pool_size=4194304
JULIUS2.__large_pool_size=4194304
JULIUS2.__shared_pool_size=83886080
JULIUS2.__streams_pool_size=0
*.audit_file_dest='/home/oracle/admin/JULIUS2/adump'
*.background_dump_dest='/home/oracle/admin/JULIUS2/bdump'
*.compatible='10.2.0.1.0'
*.control_files='/home/oracle/oradata/JULIUS2/control01.ctl','/home/oracle/oradata/JULIUS2/control02.ctl','/home/oracle/oradat
a/JULIUS2/control03.ctl'
*.core_dump_dest='/home/oracle/admin/JULIUS2/cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_name='JULIUS2'
*.db_recovery_file_dest='/home/oracle/flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.dispatchers='(PROTOCOL=TCP) (SERVICE=JULIUS2XDB)'
*.job_queue_processes=10
*.open_cursors=300
*.pga_aggregate_target=16777216
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=167772160
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='/home/oracle/admin/JULIUS2/udump'
*.utl_file_dir='/home/oracle/mydocs'
oracle@scarlino:~/product/10.2.0/db_2/dbs> sqlplus " / as sysdba"
SQL*Plus: Release 10.2.0.1.0 - Production on Mon Sep 19 11:36:29 2005
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup
ORACLE instance started.
Total System Global Area 167772160 bytes
Fixed Size 1218316 bytes
Variable Size 92276980 bytes
Database Buffers 71303168 bytes
Redo Buffers 2973696 bytes
Database mounted.
connect ctxsys/ctxsyDatabase opened.
SQL> s
Connected.
SQL> drop user textuser cascade;
User dropped.
SQL> CREATE USER TEXTUSER IDENTIFIED BY TEXTUSER;
User created.
SQL> GRANT RESOURCE, CONNECT, CTXAPP TO textuser;
Grant succeeded.
SQL> GRANT RESOURCE, CONNECT, CTXAPP TO textuser;
Grant succeeded.
SQL> GRANT EXECUTE ON CTX_CLS TO textuser;
Grant succeeded.
SQL> GRANT EXECUTE ON CTX_DDL TO textuser;
Grant succeeded.
SQL> GRANT EXECUTE ON CTX_DOC TO textuser;
Grant succeeded.
SQL> GRANT EXECUTE ON CTX_OUTPUT TO textuser;
Grant succeeded.
SQL> GRANT EXECUTE ON CTX_QUERY TO textuser;
Grant succeeded.
SQL> GRANT EXECUTE ON CTX_REPORT TO textuser;
Grant succeeded.
SQL> GRANT EXECUTE ON CTX_THES TO textuser;
Grant succeeded.
SQL> connect textuser/textuser
Connected.
SQL> begin
ctx_ddl.create_preference('COMMON_DIR','FILE_DATASTORE');
end;
/ 2 3 4
PL/SQL procedure successfully completed.
SQL> begin
ctx_ddl.set_attribute('COMMON_DIR','PATH','/home/oracle/mydocs');
end;
/ 2 3 4
PL/SQL procedure successfully completed.
SQL> begin
ctx_ddl.create_preference ('AUTO_DECT','INSO_FILTER');
end;
/ 2 3 4
PL/SQL procedure successfully completed.
SQL> create table mytable(id number primary key, docs varchar2(2000));
Table created.
SQL> insert into mytable values (111557,'Zwischenbericht.doc ');
1 row created.
SQL> insert into mytable values (111558,'Test.txt ');
1 row created.
SQL> commit;
Commit complete.
SQL> drop index myindex;
drop index myindex
ERROR at line 1:
ORA-01418: specified index does not exist
SQL> create index myindex on mytable(docs)
indextype is ctxsys.context
parameters ('datastore COMMON_DIR'); 2 3
Index created.
SQL> select token_text from dr$myindex$i;
no rows selected
SQL> select id, docs, score(1)
from mytable
where contains (docs, 'Dokumentation', 1) > 0; 2 3
no rows selected
SQL> select * from CTX_USER_INDEX_ERRORS;
ERR_INDEX_NAME ERR_TIMES ERR_TEXTKEY
ERR_TEXT
MYINDEX 19-SEP-05 AAANA3AAEAAAAGEAAA
DRG-11513: unable to open or write to file /home/oracle/mydocs/Zwischenbericht.d
oc
MYINDEX 19-SEP-05 AAANA3AAEAAAAGEAAB
DRG-11513: unable to open or write to file /home/oracle/mydocs/Test.txt
SQL>
################################################################################ -
Possible reasons for BCP import failure? [Unable to open BCP host data-file]
Hi,
I have inherited a process where a bunch of tables are being prepared locally with python and puched to a database. It fails and I don't know why, though my first thought is access rights. I have admin access to the database (and server?) using SQL server
authorisation. Here is an example BCP command being churned out by the python script:
bcp "[TEST].[dbo].[ISP_2014_flat]" in "flat_files/ISP_2014_201504011504.csv" -U admin -P XXX! -c -t ^ -S "xxx20039999\DZUHE00999,2311"
SQLState = S1000, NativeError = 0 Error = [Microsoft][SQL Server Native Client 10.0]Unable to open BCP host data-file
What can I check that might be responsible for this problem?
Thanks,
AndrewBelow are points that you can consider:
I don't think you need double quotes (") around the table and filename.
If the file is on shared folder, provide the UNC path like
\\server\folder\file.csv and even if it is in local try providing full path
Make sure the file is not opened by someone (if it exists already)
If it works from SSMS and doesn't work if run via SQL Agent then Agent account must have access to the file
You can see few examples given in BCP Utility and also you may give try using BULK INSERT too
bcp Utility
BULK INSERT (Transact-SQL)
Cheers,
Vaibhav Chaudhari
[MCTS],
[MCP] -
How to open a specific excel file by activex & overwrite by set_cell_value.vi
I've seen the 'Write Table and Chart to XL.llb', but how can i open an existing excel file/workbook/sheet and rewrite some of the data instead of open a new worksheet everytime? It may already shown in your examples somewhere, but since I'm new to activex/property node stuff, I can't figure it out. Your help is appretiated.
Thanks
AnthonyThe process is very similar. Starting with the example, open the diagram and you'll see a VI labled "Open Book" (The name of the VI is actually "Open New Workbook.vi". Right click on it and select Replace/Select a VI...
Now navigate to \\Labview 7.0\examples\comm\excelexamples.llb and select the file "Open Specific Workbook.vi". This VI has an input for specifying a filename to open.
Likewise, the example also calls a VI named "Open a New Worksheet.vi" replace that with "Open a Specific Worksheet.vi" (found in the same place).
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps -
I'm running Mozilla-firefox on a Lenovo laptop. Last night the screen changed suddenly. brief alert about patch. unable to open email inbox to read/send emails. logged off thinking all would be right by morning. today, can access internet, google, etc, but unable to open email inbox. plus the listing of the various yahoo accts has changed the sequence order. please help. i depend on my email for my livelihood. i can read emails on my blackberry so the issue is not my internet provider.
In the patch 29, it is
function encode_attachment(str) {
var c, i, s = ''
for (i = 0; i < str.length; i++) {
switch (c = str.charAt(i)) {
case ' ':
case '#':
case '?':
case '%':
s += NN ? '_' : escape(c); break
default:
s += c
return s
NO issues seen, Able to open attachment which has space in the file name.
Maybe you are looking for
-
When I Drag Loops To The Loop Browser...
All my loops are in the folder /Library/Application Support/GarageBand/Apple Loops. I dragged them over from the finder to the loop browser in GB, and it looks like it copied all of them to another folder user/Library/Audio/Apple Loops/User Loops/Gar
-
How do I select a specific folder of photos for a slideshow on Apple TV?
Using Apple TV 3 and Mountain Lion on Mac Mini. I am making a slide show on Apple TV. The thing is, unlike in the music function, in which I see all my playlists listed, in the Slideshow function all I see is "Photos", and the photos shown are only t
-
New settlement parameters in sales order does not work
Hi I have a sales order for service material. It is invoiced. I have to settle it. The existing settlement rule is wrong. So I have created a new allocation structure and changed settlement parameter in the sales order.
-
How use non cumulative key figure and noncumulative key figure screenshot
how use non cumulative key figure and noncumulative key figure screenshot
-
Post Author: RJPiekos CA Forum: Desktop Intelligence Reporting I am trying to use the count function to count the number of unique PO numbers in a column. The program returns a value of "1" even when there are no PO's to be counted. Is there some sys