Unable to open .acsm files

I've just upgraded to ADE 2.0 and can no longer open .acsm files. I've tried to associate ADE 2.0 to .acsm files via Windows 7 control panel and 'open with' but when I click ok, nothing happens - no error message but no acceptance of the association

E_ADEPT_REQUEST_EXPIRED could mean that a library loan has expired.
It can also happen if you get times or times-zones wrong.
There are quite a few bugs introduced in V2.0 that were not there in v1.7.2.
If you don't need the new features of V2.0, you might find an install of 1.7.2.
You can have both installed at once.
Version 1.7.2, it is a little difficult to find, available on Adobe site for Windows and for Mac.
http://helpx.adobe.com/digital-editions/kb/cant-install-digital-editions.html
The forum software is sometimes corrupting the link above. There shouldn't be a blank in 'editio ns.html'. The following redirects to the same page: http://tinyurl.com/diged172

Similar Messages

Unable to open acsm files in ADE. "Error! Check activation." Any idea?

Unable to open acsm files in ADE (e-books I have recently bought and borrowed, too). I get the message "Error! Check activation." The ADE programme is authorized on both PCs in use. Any idea?

Try de-authorizing and then re-authorize the computer.
Please make sure that you remember the user-id/password correctly.

Unable to open .ACSM file in Digital Editions on intel Mac OS X

I am on an intel based Mac running OS X and have recently purchased an eBook for Digital Editions. I had previously purchased a Digital Editions format eBook and had no problems with it, and am currently able to view it in Digital Editions. I have downloaded the .ACSM file for my new eBook, however, when I attempt to assign the file to open with Digital Editions, the Digital Editions program window opens, but no activity concerning my new eBook occurs, and all that is listed is my previously purchased eBook. I have also attempted dragging the .ACSM file directly to the Digital Editions program window, as I have heard that this works on occasion, but still nothing. I have only ever installed DE version 1.7.1 and have no previous editions that would need to be uninstalled. Any ideas?

I am on an intel based Mac running OS X and have recently purchased an eBook for Digital Editions. I had previously purchased a Digital Editions format eBook and had no problems with it, and am currently able to view it in Digital Editions. I have downloaded the .ACSM file for my new eBook, however, when I attempt to assign the file to open with Digital Editions, the Digital Editions program window opens, but no activity concerning my new eBook occurs, and all that is listed is my previously purchased eBook. I have also attempted dragging the .ACSM file directly to the Digital Editions program window, as I have heard that this works on occasion, but still nothing. I have only ever installed DE version 1.7.1 and have no previous editions that would need to be uninstalled. Any ideas?

I am unable to open raw files from my Canon T1i in Adobe Camera Raw of my version CS3 of Photoshop. I have tried to update my ACR by downloading version 4.6 from the Adobe website but I am still unable to open raw files, just JPEG. Is there a way to use

I am unable to open raw files taken on my Canon Rebel T1i in my version of Photoshop CS3. When I import raw files into Bridge they come up as patches with CR2 on them and when clicked on, a notice comes up stating that Photoshop does not recognize these files. I tried to update my Adobe Camera Raw by downloading version 4.6 from the Adobe Website, but when I clicked on the plus-in, I got another message that Photoshop does not recognize this file. I spoke with a representative from Canon who said that I could not update CS3 and that I should subscribe to the Cloud. I would prefer to use my CS3, if possible. Can anyone advise me what to do?

The T1i was first supported by Camera Raw 5.4 which is only compatible with CS4 and later
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
Some options:
Upgrade to CS6
Join the Cloud
Download the free Adobe DNG converter, convert all T1i Raw files to DNGs then edit the DNGs in CS3
Camera raw, DNG | Adobe Photoshop CC

ERROR: Unable to open TUXCONFIG file

Hi,
I installed and installed the following software successfully on Windows XP
Oracle WebLogic Server 11gR1 (10.3.1) Microsoft Windows
PeopleSoft Enterprise PeopleTools 8.50
PeopleSoft Enterprise Human Resources Management System 9.1 - Revision 2
Tuxedo 10gR3 for MS Windows Server 2003 w/MS VS 2005 (32-bit x86, AMD64/EM64T x64) 32-bit
i am at the point of installing the Application Server. Domain created sucessfully but i got boot errors as shown below.
I searched for the TUXCONFIG file but could not find it in the tuxedo installation folder.
I read that i have to create the TUXCONFIG,if missing, using tmloadcf.exe and the ubbconfig file, but the only UBBCONFIG file is located in "\samples\atmi\rpcsimp\" folder.
How do i create the TUXCONFIG file?
Did i miss something with the installation? What location should this file exist after your tuxedo installation?
thanks
K
BOOT ERRORS:
PeopleSoft Domain Boot Menu
Domain Name: hrms
1) Boot (Serial Boot)
2) Parallel Boot
q) Quit
Command to execute (1-2, q) [q]: 1
Attempting to boot bulletin board...
tmadmin - Copyright (c) 2007-2008 Oracle.
Portions * Copyright 1986-1997 RSA Data Security, Inc.
All Rights Reserved.
Distributed under license by Oracle.
Tuxedo is a registered trademark.
No bulletin board exists. Entering boot mode.
115818.SU1491!PSWATCHSRV.5832.6140.-2: LIBTUX_CAT:1519: ERROR: TUXCONFIG value (C:\Documents an
d Settings\klondon\psft\pt\8.50\appserv\hrms\PSTUXCFG) is longer than the allowed length of 64
115818.SU1491!PSWATCHSRV.5832.6140.-2: LIBTUX_CAT:588: ERROR: Unable to open TUXCONFIG file
115818.SU1491!PSWATCHSRV.5832.6140.-2: LIBTUX_CAT:6272: ERROR: Unable to get bulletin board par
ameters
115818.SU1491!tmboot.2652.1488.-2: CMDTUX_CAT:825: ERROR: Process PSWATCHSRV at SU1491 failed w
ith /T tperrno (TPESYSTEM - internal system error)
115818.SU1491!tmboot.2652.1488.-2: tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; init
iating user error handler
115821.SU1491!BBL.2956.4352.0: CMDTUX_CAT:26: INFO: The BBL is exiting system
115825.SU1491!PSADMIN.3088: End boot attempt on domain hrms
Edited by: user2932595 on Apr 17, 2010 1:17 PM
Edited by: user2932595 on Apr 17, 2010 1:21 PM

Hi
The TUXCONFIG file normally is created automatically when you create your domain.
In this case I think you ran into trouble because the path of installation is too long!
Note the error in your log:
115818.SU1491!PSWATCHSRV.5832.6140.-2: LIBTUX_CAT:1519: ERROR: TUXCONFIG value (C:\Documents and Settings\klondon\psft\pt\8.50\appserv\hrms\PSTUXCFG) is longer than the allowed length of 64
Your path is 69 chars long!
I would suggest that you re-try the configuration with a shorter tuxedo and PS_HOME: perhaps in the root directory (c:\PSHOME)
In the past I've also noticed that installations have problems with paths that have spaces - ex: 'Documents and settings' , so I would avoid that as well.
Edited by: Alternate on Apr 19, 2010 2:00 AM

ERROR: Unable to open structapps file!

Hello,
Having modified the structapps.fm in FM10, I am getting the following error within a dialog when attempting to use the same file in FM8:
ERROR: Unable to open structapps file! FA_errno -43
Is FM not backward compatible ? OR do I need to reread the file in FM8
Thanks

The file should be saved in the FM version that you're using it in. You can't use any newer FM version file in any older version of FM, e.g. FM8 can't open any FM10 files (except for the MIF formats).

ZAV 10 - Unable to open parameter file error

When trying to launch a ZAV 10 app, C-Cure Administration Console, users are getting an error "**Unable to open parameter file cc800cl.pf, errno 2. (1247)". This only appears to be happening on Win7. This did work when first created, but after a few weeks the error has started to pop-up.

If this was working and is not now, and you are certain nothing has changed on the client systems (or at least nothing that could interfere here), then this might be an issue with the license used when building the application. What is the expiry date of your license and was it applied prior to building this exe?
If this isn't expiring please open an SR for this issue, if you can. This is the information the support team will require:
- Copies of any warnings or errors around the time the issue occurs (or a copy of the application and system event logs, in .evtx format)
- A copy of the exe you are using
- If you can build the exe again as a diagnostic-mode executable and provide the diagnostics generated when attempting to run, that can be very helpful
- It may also be required that you send installation media for the application and your build process, so the team can attempt to reproduce the issue in-house
- You will also typically be asked for the .xappl file and associated Files folder, if reproducing in-house is required. This will become absolutely necessary if a ticket needs to be filed with Spoon, so sending it ahead of time is a good idea

"Unable to open config file" Error when starting tomcat

hi all,
Here is the output from two of the log files when I start tomcat4 on my linux box. I have configured the mod_jk on the tomcat side.
From the output of the second log file, it seems that the ajp13 worker I defined was started successfully. What I don't understand is the following:
1) In catalina.out, where des the line 'Unable to open config file' come from? Which config file?
2) Tomcat4 is supposed to generate a mod_jk.conf automatically, but I don't see any file generated in 'conf/auto/'.
Content of 'catalina.out'
Unable to open config file
Starting service Tomcat-Standalone
Apache Tomcat/4.0.4
Unable to open config file
Starting service Tomcat-Apache
Apache Tomcat/4.0.4content of 'catalina_log.2002-08-16.txt'
2002-08-16 01:05:22 HttpConnector Opening server socket on all host IP addresses
2002-08-16 01:05:28 Ajp13Connector[8009] Opening server socket on all host IP addresses
2002-08-16 01:05:28 Ajp13Connector[8009] Starting background thread
2002-08-16 01:05:29 Ajp13Processor[8009][0] Starting background thread
2002-08-16 01:05:29 Ajp13Processor[8009][1] Starting background thread
2002-08-16 01:05:29 Ajp13Processor[8009][2] Starting background thread
2002-08-16 01:05:29 Ajp13Processor[8009][3] Starting background thread
2002-08-16 01:05:29 Ajp13Processor[8009][4] Starting background thread

I have all those files too.
I think the 'config file' mentioned in the error log is the mod_jk.conf.
On Jason Hunter's tomcat4 guide, it says don't use the tomcat4 RPM to installed. What is the difference bettween the RPM version and the tar.gz version? The only difference I can think of is that in the RPM version, the conf directory is in the 'etc/tomcat4/conf'. Could it be the reason that tomcat4 cannot read the config file? But it has no problem reading the server.xml though.

"Unable to open project file" Error Message

I pulled an all-nighter (13 hours of editing) last night to create a critical project in FCE 3.5.1 on my Intel iMac running 10.4.11 then left this afternoon for a few hours and shut down my machine. Came back tonight and tried to open the project (which I saved on my Maxtor 1 TB external drive along with all of the scratch disk files). To my absolute panic, it won't open the file now with an error message that simply says, "Unable to open project file". HELP!!!! Anyone have any suggestions?!?!

In the past I found (and reported to Apple Feedback) the same bug Steve reports here, but I should recall that the problem:
- only appeared in PAL projects (probably not the case for kscritch) - never heard of it in NTSC
- was consistent in FCE 3.x, not so in FCE 4
I made tests importing .psd images with transparency into PAL projects using FCE 4, and I had various behaviours: sometimes the project worked, sometimes I couldn't open the project again (as in FCE 3), sometimes I had error messages with inconsistent behaviour (msg like "file error", but the project opened and file was there...), etc. so I decided to do without.
Now I only import .tif or .png images when I need transparency
Piero

Unable to open pst file error details access to the path is denied

Hello,
iam trying to do a mailboximport-request from a QNAP-nas that is member of the domain.
When doing the mailboximport i am getting the following error : unable to open pst file error details access to the path is denied.
Which permissions do i need to have on the folder/file on the qnap to import the .pst-file?
Thx

Move your PST files to a windows server. Exchange Trusted Subsystem is a universal group in Active Directory.
Read more here: http://technet.microsoft.com/en-us/library/ee633455(v=exchg.141).aspx#Pre
Mike Crowley | MVP
My Blog --
Planet Technologies

"Unable to Open Project File" - error

Does anyone know how to resolve an "Unable to Open Project File" - error. I accidentally shut down my computer wrong, although Final Cut wasn't open.

Welcome to the forums.
The project file might have gotten corrupted. Look for the AUTOSAVE VAULT (typically in the DOCUMENTS>FINAL CUT PRO DOCUMENTS folder) and open the most recent version. Copy it to your main project folder if it works.
If not, then try trashing your prefs with FCP Rescue.
Shane

Unable to open .chm file from a link in Weblogic 7.0

Unable to open .chm file from a link in weblogic server. But the same
jsp code works in Websphere
Sample Code :

The above link, works well in websphere. help is a folder that
resides in the server. But when i tried to execute the same in
Weblogic, some junk characters appeared . so i tried to direct the
link to Display.jsp and passed the path of the chm file as the
parameter. I cleared teh out buffer using out.clearBuffer() . i set
the content type to application/x-msdownload and also set the header
to content disposition.
Nothing worked .
I also tried another way.. That is the following
I even tried including the mime type
<mime-mapping>
<extension>chm</extension>
<mime-type>application/x-msdownload</mime-type>
</mime-mapping>
in the web.xml file. and still it doesnt work
Nothing Worked . What should i do ? I need immediate help to sort out
this issue. Can anybody help me
- Angel

This could be a Launch Services issue. The following article describes how to manually reset Launch Services — the notes at the bottom of the article also provide information about the side effects of deleting each of the files involved:
Resetting Launch Services
If you prefer using a cache cleaning utility instead of following the manual procedure described in the previous article, take a look at this other article for general troubleshooting and cache-cleaning procedures. Actually, you should also verify/repair the startup disk (not just permissions), as described there:
Resolving Disk, Permission, and Cache Corruption
The most appropriate utility for this particular problem probably is Tiger Cache Cleaner, but you may also want to consider other utilities, such as OnyX, or Cache Out X, which are free. Whatever utility you choose, be sure to read this first:
Side effects of System cache cleaning
As an example, this is how you should proceed with OnyX:
1. Quit all applications.
2. Launch OnyX and enter your administrator password.
3. Go to Maintenance > Reset and check LaunchServices database.
4. Un-check any other pre-checked options.
5. Click the Execute button.
6. Restart the computer.
BTW, if you’re running Mac OS X 10.4 (Tiger), as your profile indicates, it would have been more appropriate to discuss this in the Mail & Address Book - Tiger forum. If the discussion applies to both Mail 1.x and Mail 2.x, it doesn’t really matter, but it’s difficult to know that in advance.

Unable to open RAW files in CS6 after update

Hi all,
I have Photoshop CS6 and have been able to open my D4 Raw files with no issues using the Camera Raw version 7.1 plugin.
Yesterday I upgraded my Mac OS from Snow Leopard to Yosemite (a big jump I agree) and proceeded to update Photoshop to the latest version as well as installing Adobe DNG Converter 8.8.
I am apparently still using the same 7.1 plugin version as I always have but I am now no longer able to open any RAW files through Photoshop as it displays a message saying 'files not recognised' when I try to open them.
Have I skipped too many updates? Do the latest Photoshop CS6 updates leave me unable to open RAW files? Am I being pushed down the CC route?
Could anybody offer any help at all as I have a wedding to edit but cannot open any files!!! Stress!!!
I backed up my system through Time Machine before I did the update but im not sure if I restore that I will still have Yosemite OS running.
Any help or advice really is appreciated.
Many thanks.
Phil

Camera RAW should be at version 8.8 for CS6
Adobe - Photoshop : For Macintosh
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh

I am unable to open some file because there is "encrypt contents to secure data" attribute applied by me before format my pc

Please see this chat session
Shayne M:
3:03:06 PM
Hi, thanks for visiting Answer Desk! I'm Shayne M.
You:
3:03:24 PM
Hi! I am Surendra from Lucknow Inida.
Shayne M:
3:03:37 PM
Hello
How can I help you?
You:
3:05:35 PM
Madam my some file in green color and i am unable to open these file because there is encryption attribute applied by me some time before and now i am unable to remove encryption from my files
because today I format my system please help me
Shayne M:
3:06:01 PM
oh, sorry to hear that.
may I know what type of files is that?
is that a word file?
You:
3:07:37 PM
many type files excel pdf doc docs and many more some programs also encrypted, and some folder also encrypted.
Shayne M:
3:07:48 PM
I see.
may I know what version of windows do you have?
You:
3:08:53 PM
Window 7 Professional
Shayne M:
3:09:16 PM
I see, thanks.
Click here (Link Silverlight)
you can try that link
Dial toll-free: 1800 102 1100 or 1800 111 100
Direct dial: +91 80 40103000
or dial that number for Microsoft India.
any other questions for me?
You:
3:10:34 PM
I am downloading silverlight.exe please wait
Shayne M:
3:10:41 PM
okay.
please try the link I gave you, if that will not work, feel free to contact us back so we can look for any other options for you,
you may also contact the number I gave you for Microsoft India support.
You:
3:13:40 PM
program install successfully what to do now ?
Shayne M:
3:13:59 PM
please follow the intructions I gave you.
it's on the link.
You:
3:14:45 PM
please repeat
Shayne M:
3:14:53 PM
Click here
(Link Silverlight)
there you go,
if that will not work,
feel free to contact us back
You:
3:15:11 PM
please wait i am reading
Shayne M:
3:15:23 PM
Dial toll-free: 1800 102 1100 or 1800 111 100
Direct dial: +91 80 40103000
or you may dial that number/
just take your time reading that. I cannot stay any longer Surendra.
anything else?
You:
3:17:18 PM
I am unable to remove attribute till now
Shayne M:
3:17:28 PM
alright,
you may contact the number I gave you for further assistance.
Dial toll-free: 1800 102 1100 or 1800 111 100
Direct dial: +91 80 40103000
that's Microsoft for India.
You:
3:18:43 PM
ok
Shayne M:
3:18:43 PM
anything else?
Thank you for contacting Microsoft Answer Desk, you Have a Great Day,Take care.
You:
3:19:04 PM
thank you
Shayne M:
3:19:10 PM
you're welcome.
Your Answer Tech Shayne M has ended your chat session. Thanks for visiting Answer Desk.

Hey guys,
So this is follow up from my debarkle with the EDD. I found out my problem with copying files from Mac to EDD and vice versa was a result of a not so good EDD ( i had an apollo hard drive from imation) that was not very compatible with macs. So i did my research and found out that the best hard drives were Western Digital and Seagate. I bought the newest western digital EDD 1TB and formated it to FAT32 and guess what...no problems so far. The only problem is that FAT32 format doesn't copy files larger than about 4 gigs so i couldnt copy a movie from my brothers computer onto my EDD that was 1080p. You could probably resolve that by partitioning a small part of your hard drive in ExFAT? but yeah, hopefully that helped guys.
Aaisha

I am unable to open video files on this website.

When I click on video links of the following website--http://tubtub.com/--I receive an error message that reads as follows:
"File not found
Firefox can't find the file at mms://TITLE.tubtub.com/.
Check the file name for capitalization or other typing errors.
Check to see if the file was moved, renamed or deleted.
Try Again"
I had initially seen a window that was named "Launch Application," which, seemingly, allowed one to choose an application by which to open the video links. I chose my VLC player to do this and checked a box to associate this "Launch application" window with the VLC player, but received an error message that VLC was unable to open the file that began with an "mms" URL. Then I was never able to get back to that "Launch application" window to select another application, such as Windows Media Player, Real Player, etc. I even tried uninstalling my Firefox browser and the VLC player and reinstalling them both, all to no avail.
Please explain how I may get these video links to play and the "Launch Application" window to open again. I recall having used TubTub.com successfully before.
Thank you.

Hi mendcocr,
Please see this document about configuring web browsers to display PDF files: http://helpx.adobe.com/acrobat/using/display-pdf-browser-acrobat-xi.html.
Please let us know if you need additional help.
Best,
Sara

Unable to open .acsm files

Similar Messages

Maybe you are looking for