Unable to open AV console on the windows.

Hi All ,
I have a windows 8 laptop on which i have created a Virtual Box image of the Audit vault. After Installation I am not able to open the console to completed the setup.
I am also able to ping between both system.
Am i Missing any steps ?
pls find attached the details
System
ip address : 192.168.1.74
Gateway 192.168.1.254
Subnet : 255.255.254.0
AV
ip Address 192.168.1.50
Gateway 192.168.1.254
Subnet : 255.255.254.0

1. How many VirtualBox interfaces do you have in your laptop?
On my laptop I have one and on desktop -- two with different IPs: one with static IP and second with dhcp. You should specify correct one.
2. Are you able to ping VirtualBox Host-Only Network IP? Let say 192.168.56.1.
3. Check your laptop configuration:
ipconfig /all
This is my
Ethernet adapter VirtualBox Host-Only Network:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : VirtualBox Host-Only Ethernet Adapter
Physical Address. . . . . . . . . : 08-00-27-00-0C-49
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 192.168.56.1(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . :
NetBIOS over Tcpip. . . . . . . . : Disabled
Ethernet adapter VirtualBox Host-Only Network 4.0:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : VirtualBox Host-Only Ethernet Adapter #2
Physical Address. . . . . . . . . : 08-00-27-00-48-87
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 192.168.4.1(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
NetBIOS over Tcpip. . . . . . . . : Disabled
4. Configure appropriate your VirtualBox Host-Only Network in VB:
File -- Preferences -- Network
Select Host-only networks. You should have names from the list above: VirtualBox Host-Only Ethernet Adapter, VirtualBox Host-Only Ethernet Adapter #2
Double click adapter
Check IP
5. Check your laptop configuration after:
ipconfig /all
The result:

Similar Messages

Unable to open b2b console after SOA 11.1.1.6 installation

Hi Gurus,
I had installed oracle SOA 11.1.1.6.0 successfully but i am unable to open b2b console after the installation.
Now
1)With Oracle installation can i able to open b2b console?
2)If not,Should i install oracle b2b soft also?
if yes,I can see the soft in 3 CDs (CD 1 of 1 ,CD 1 of 2 and CD 1 of 3)is it sufficient to install CD 1 of 1 so that others will also get install)
after the installation can i able to open b2b console?
please clarify?
Regards
Ramesh

Hi Anju,
Thanks for the help.
Can you send me some blog to guide me step by step to build Oracle b2b SOA application.
Please clarify:Do i need to install B2B document editor soft(CD 1of 1,CD 1 of 2,CD 1 of 3) or Installation of CD 1 of 1 is sufficient for b2b document editor.
Is B2B server is different from SOA server?If at all i need to deploy some doc in server,Can i deploy in SOA server using document editor?
Can i have some clarity on 1.How to install b2b doc in server?
Can i have a step by step sample to run a simple b2b application?
Regards
Ramesh

Unable to Open any Models in the VC storyboard

Hi,
I am unable to open any models in the Visual Composer Storyboards. The moment I login to VC, I get the standard IE error and the window closes.
Has any one come accross this issue before?
-Ashwini.

Hi Ashwini,
I think this is not an VC error. I used Google and found:
<a href="http://support.microsoft.com/?scid=kb%3Ben-us%3B293623&x=5&y=12">http://support.microsoft.com/?scid=kb%3Ben-us%3B293623&x=5&y=12</a>
I think there is problem with your IE Installation. Can you check this issue with another machine?
Best Regards,
Marcel

Unable to open e-mail attachments in windows 8.1

Unable to open e-mail attachments in Windows 8.1
Keep getting the below error message:
C:users\sheila\appdata\local\
microsoft\windows\netcache\ie\8Z19RCY7\RAM96a.PDF
Invalid value for registry
This question was solved.
View Solution.

@st3lla
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

When I close and reopen firefox, it restores my tabs, but it restores tabs from hours or days ago, not the ones that were open when I closed the window - why?

I normally keep my Firefox window open for long periods of time because I have a lot of active tabs. When I close the window and reopen it, I am still able to restore tabs, but as of a few weeks ago, it has stopped restoring the most recent version. Normally, when I would close and reopen, the tabs would be the same ones that were open when I closed the window. Now, it restores to a version from a few days ago instead of the current version. I have to revert to pulling my more recent tabs out of the recent history. I checked my options and I can't figure out any way to control this. How can I fix it so that I can count on my Firefox window to restore the tabs that I actually care about?

You can check for problems with the sessionstore.js and sessionstore.bak files in the Firefox Profile Folder that store session data.
Delete the sessionstore.js file and possible sessionstore-##.js files with a number and sessionstore.bak in the Firefox Profile Folder.
*Help > Troubleshooting Information > Profile Directory: Open Containing Folder
*http://kb.mozillazine.org/Profile_folder_-_Firefox
Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost, so you will have to create them again (make a note or bookmark them).
*http://kb.mozillazine.org/Multiple_profile_files_created
*http://kb.mozillazine.org/Session_Restore

I recently transfered everything from my emac to another one but now when I try to open iTunes I get the window that states: The file "iTunes Library" cannot be read because it was created by a newer version of iTunes.

I recently transfered everything from my emac to another one but now when I try to open iTunes I get the window that states: The file "iTunes Library" cannot be read because it was created by a newer version of iTunes. The computer I transfered to had a bunch of files on it and I got full ownership of what was already there, so, how do I get to my iTunes library, I do have access as an administrator to the iTunes library (that works just fine) already there and I guess I must have had a newer version ofiTunes on my defunt eMac....

Tell us some version numbers please, of your Mac OS versions and iTunes versions on both computers (two eMacs yes?).
dlrobinson49 wrote:
I guess I must have had a newer version ofiTunes on my defunt eMac....
That is a pretty good guess.Try updating the second eMac's iTunes to at least the version that was on the first.

Where can i download quicktime 7.5.5? A compatibility version gets downloaded but its not what I need. Im unable to open my ITUNES without the quicktime 7.5.5 upgrade or higher. Anything higher isnt supported by my mac ( OS X 10.5)

where can i download quicktime 7.5.5? A compatibility version gets downloaded but its not what I need. Im unable to open my ITUNES without the quicktime 7.5.5 upgrade or higher. Anything higher isnt supported by my mac ( OS X 10.5)

I had the same problem when re-installing my old iBook recently. You can find it here:
http://support.apple.com/kb/DL27

Everytime I attempt to open iPhoto, a message comes up saying, "iPhoto is unable to open this library," and the only option if gives is to quit. How do I get it to open?

When I select iPhoto to open the application, a message comes up saying, "iPhoto is unable to open this library," and the only option available is to quit. I don't know what library iPhoto is attempting to open, but all I want to do is just start iPhoto over from scratch.

Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Choose Library' to find out what Library is in question. Use the 'Create Library' option to make a new one.
To try and repair the damaged one:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Unable to open admin console in either Ap server 9 PE or EE5SDK

I am new to Java, and have recently installed ap server 9PE, as well as EE5SDK on my Windows XP platform.
The problem is, I am unable to USE either program, because the admin console(s) show invalid username/password.
I know that I used my email address as the username for both of these, and I even know what I thought was the password, but I am totally locked out.
Is there anyway to reset all the passwords including the master, as well as the domain passwords to allow all the info to be reset? I would hate, at this point, try to remove both these apps from my drive, and attempt to reinstall, for I have no quarantees that the passwords will carry on with the reinstall.
I want to be able to access both 9PE (ap Server) as well as the Enterprise5SDK, but I am totally locked out, have no idea where the files are with the password info, and am basically, at this point dead in the water. I also downloaded/installed netbeans 6.1, that will open, but I need the two apps which I am locked out of to do any meaningful programming... HELP!!!!!!!
Greg M

I am new to Java, and have recently installed ap server 9PE, as well as EE5SDK on my Windows XP platform.I don't know about the Sun App Srever, but it is now called GlassFish .... are you talking about it.
I also downloaded/installed netbeans 6.1, that will open.Have you downloaded the complete package of NetBeans 6.1, because if you have done so, then GlassFish would have been automatically got installed (check Tools>Servers in NetBeans). And for your information its default username is 'admin' and password is 'adminadmin' ;-)
Thanks!

Unable to open EIS console after install...

I get the error "olapbldr has encountered a problem and needs to close. We are sorry for the inconvenience.",
This displays in the typcial Microsoft Send Error Report window. THis occurs immediately after I try to open the EIS console by clicking on the shortcut in Programs menu.
Background:
I installed Hyperion System 9 release 9.3.1 from scratch.
1. Oracle Database (user IDs: hypuser for shared services, plansys and planapp for planning module)
2. Shared Services
3. Essbase
4.Planning (without EPMA)
5. HFM
6. Reporting and Analysis
I installed and configured the above components exactly as in the order given in "Installation_Start_here" document.
After completion of Step 3 above, I was able to open EIS console. At this time, it displayed the Metaoutline creation login window. I did not create any meta outline at this time.
I believe this can be done later and not part of the installation/configuration. Correct me if I am wrong.
The above mentioned error message occured after I try to open EIS console after completing the installation of products. At this stage, its not even showing any initial screen of EIS console and straight away gives the erorr message.
What could be the problem here? Did I miss anything in installation/configuration? I have followed this sequence and method in past installations, but didn't have any issue opening EIS.
cheers
Z

Iam also facing the same problem.
While open EIS console, Iam getting error like "An unhandled win32 exception occurred in olapbldr.exe".
There is no error message in log files.
Please help me

Unable to open forms in 10g AS, windows 2003

Hi
I successfully install oracle 10g AS R2 on windows 2003 server,but unable to opening default forms(text.fmx) from OracleAS form services also getting an error " Page cannot be displayed".
Initially when I run the test forms it installed jinitiator and closed the browser automatically, and the same repeating every time/page cannot be displayed.
I tried by changing the default forms path also, but no use :-(
Any suggestions?
I really appreciate your help
Chaitu

ths 4 ur replay
I tried with local admin also but no use
http://yyy.yyy.yyy:8080/forms/frmservlet?form=test.fmx&userid=&otherparams=useSDI=yes&lookAndFeel=oracle&colorScheme=blue
that's the default form like to check forms are working or not after installation of oracle 10g AS
Chaitu

Unable to open a Zip directory using windows default uncomressed folder

Hi
I Created a zip directory in AIX using java.util.zipfile. now when I am trying to open it in windows using its defult uncompress method I am unable to do it.
here is the sample code
import java.io.File;
import java.io.FileInputStream;
import java.io.FileNotFoundException;
import java.io.FileOutputStream;
import java.io.IOException;
import java.util.zip.ZipEntry;
import java.util.zip.ZipOutputStream;
public class Zipdita {
public void zipFolder(String srcFolder, String destZipFile, String Z_PATH) throws Exception {
ZipOutputStream zip = null;
FileOutputStream fileWriter = null;
fileWriter = new FileOutputStream(destZipFile);
zip = new ZipOutputStream(fileWriter);
addFolderToZip(Z_PATH, srcFolder, zip);
zip.flush();
zip.close();
public void addFileToZip(String path, String srcFile, ZipOutputStream zip)
System.out.println("file in addFileToZip " + srcFile);
try {
          File folder = new File(srcFile);
          /*if (folder.isDirectory()) {
          addFolderToZip(path, srcFile, zip);
          } else {*/
          byte[] buf = new byte[1024];
          int len;
          FileInputStream in = new FileInputStream(srcFile);
          zip.putNextEntry(new ZipEntry(srcFile ));
          while ((len = in.read(buf)) > 0) {
          zip.write(buf, 0, len);
     } catch (FileNotFoundException e) {
          e.printStackTrace();
     } catch (IOException e) {
          e.printStackTrace();
     } catch (Exception e) {
          e.printStackTrace();
public void addFolderToZip(String Z_PATH, String srcFolder, ZipOutputStream zip)
throws Exception {
File folder = new File(srcFolder);
System.out.println("Folder Name::"+folder.getName());
for (String fileName : folder.list()) {
//if (path.equals("")) {
     System.out.println("Filename to be zipped" + fileName);
addFileToZip(Z_PATH, srcFolder + fileName, zip);
//} else {
//addFileToZip(path + "/" + folder.getName(), srcFolder + "/" + fileName, zip);
the srcFolder referes to /a/b/
destZipfile refres to /a/b.zip
srcfile refers to /a/b/c.txt
now the zip gets created but it takes the path /a/b.Due to which I m unable to open it in windows.
please help me in removing the / from the Zip file.

Hello and welcome to the forum. Let me add code tags to your posted code
import java.io.File;
import java.io.FileInputStream;
import java.io.FileNotFoundException;
import java.io.FileOutputStream;
import java.io.IOException;
import java.util.zip.ZipEntry;
import java.util.zip.ZipOutputStream;
public class Zipdita {
public void zipFolder(String srcFolder, String destZipFile, String Z_PATH) throws Exception {
    ZipOutputStream zip = null;
    FileOutputStream fileWriter = null;
    fileWriter = new FileOutputStream(destZipFile);
    zip = new ZipOutputStream(fileWriter);
    addFolderToZip(Z_PATH, srcFolder, zip);
    zip.flush();
    zip.close();
public void addFileToZip(String path, String srcFile, ZipOutputStream zip)
System.out.println("file in addFileToZip " + srcFile);
    try {
      File folder = new File(srcFile);
      /*if (folder.isDirectory()) {
        addFolderToZip(path, srcFile, zip);
      } else {*/
        byte[] buf = new byte[1024];
        int len;
        FileInputStream in = new FileInputStream(srcFile);
        zip.putNextEntry(new ZipEntry(srcFile ));
        while ((len = in.read(buf)) 0) {
          zip.write(buf, 0, len);
   } catch (FileNotFoundException e) {
      e.printStackTrace();
   } catch (IOException e) {
      e.printStackTrace();
   } catch (Exception e) {
      e.printStackTrace();
public void addFolderToZip(String Z_PATH, String srcFolder, ZipOutputStream zip)
      throws Exception {
    File folder = new File(srcFolder);
    System.out.println("Folder Name::"+folder.getName());
    for (String fileName : folder.list()) {
      //if (path.equals("")) {
       System.out.println("Filename to be zipped" + fileName);
        addFileToZip(Z_PATH, srcFolder + fileName, zip);
      //} else {
        //addFileToZip(path + "/" + folder.getName(), srcFolder + "/" + fileName, zip);
}

The past few days every time I open firefox I get the windows' "do you want this program to make changes to your computer..."

Hello
I would be so grateful to know how to fix t his, because it's really getting on my nerves.
I have windows 7 pro 64 bit. I mostly always use firefox. Whenever i opened a new browser, I never got hit with the windows badge and "Do you want this program to make changes to your computer...." or something to that effect. YOu who have windows 7 know what I mean. Of course I click yes, but I NEVER had to do this before. I don't know what changed, what might have happened. I had to have help with some software unrelated to firefox and someone had remote work on my notebook, but he should not have changed browser settings. It is really irritating me to now end to always open the browser now and have to hear that annoying thing and the badge.
My other browsers IE and chrome do not do this.
How can I fix this? It was never the case before for years.
thanks I am grateful in advance. I can't use this browser if this s going to happen it gets on my nerves.

You're welcome.

My laptop beeps every time I open it, then when the Windows is already open a message window asking

My HP Compaq Presario Q40 CQ40 beeps everytime I open it, the when the windows are already open and i click an icon a message window appear asking me if I want to delete the said icon even if I dont want to delete it, when i click the no id does not disappear, itjust come keep on coming out as if it want to send the contents all to recycle bin..pls help I really dont know what to do, and by the way my battery needs replacement too and i haven't bought a new one yet.

I read online about a "clean reinstall" of firefox which seems to have worked! They should include direction on this on their page: https://support.mozilla.com/en-US/kb/Firefox+crashes+when+you+open+it

Recently, whenever a pop window opens with a prompt the window has a tab, so I have to resize the window in order to click on the action "enter" or "save". How can I get rid of this?

I'm a blogger and I use a web based text editor and when I input photos I have to click on a button that opens a popup where I put in the URL of the photo and have to hit "ok". In the last few weeks the pop up windows now automatically have a tab and I have to expand the window (resize) in order to click "ok". Considering that it only adds the tab AFTER I press paste/ctrl-v is so annoying and time consuming. It never used to do this before - what happened?
This started around the time I installed stumbleupon toolbar but I'm not sure if they're related. I took the toolbar off my default browser window and it doesn't show up on the popups. But just thought I'd give that info in case it's causing it somehow?
I don't know how to fix this :(

You get an alert about resending POST data if you go back to a page that was previously requested from the server by submitting form data via a POST form. 
Firefox can only make sure to get the same page by resending that POST form. 
Firefox doesn't know what that form data means, so Firefox asks for confirmation before resending that form data as such an action can cause you to repeat an action and buy another item or post a message another time. 
A way to prevent that pop-up is not to use the Back button, but to open links from a page that was requested from a server by sending a POST form in a new tab (window) with a middle-click or a Ctrl + left-click. 
Then you can close that tab or window to go back.

Unable to open AV console on the windows.

Similar Messages

Maybe you are looking for