Unable to open button "Properties"
Captivate v4
Question slide - I have been creating a series of question slides for later use. Suddenly I am unable to open the properties behind both the Clear and Submit buttons.
I can open other properties behind other buttons.
Does anyone have any ideas what has gone wrong and how to fix this please ?
Noel
I will be out of the office starting 11/11/2011 and will not return until
21/11/2011.
I am in KN Hamburg 14-18 Nov returning to office on 21 Nov. I will be
checking my emails when possible, but please expect a delay in reply.
Noel Griffiths
Kuehne + Nagel Ltd, Birmingham, England
Corporate Customer Solutions, eLearning
@: [email protected]
Mobile: 07785 388 336
A smile is a curve that sets everything straight !
Similar Messages
-
Unable to open indicator properties
Hello everyone
For some reason, as of late, I cannot access an indicator/control/boolean/clusters/arrays by right clicking on them and opening up the properties menu (i am using Labview 2009 SP1). When I do right click any of these the menu appears then I would select 'properties' which the mouse pointer would indicate busy for a moment, but I would not get the propertie menu. The 'property' selection was working once before.Jeff Bohrer wrote:
Sounds like something got moved.
C:\Program Files\National Instruments\LabVIEW 2009\resource\PropertyPages\ is the folder that I believe contains the internal things that are needed for LabVIEW to display properties.
It may be that you moved something by accident or you changed a vi unwittingly. You may need to re-install LabVIEW to get past this.
AKA "repair"
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction -
Warning Unable to open /opt/coldfusion8/runtime/lib/license.properties
This error cames up every day in the log files. Do I need a new license or to update? I believe this is version 8. I am aware there are newer versions available. The process appears to stop after a certain number of days with the error being in the log every day. Here is the latest two log entries:
07/27 03:01:18 error A License exception has occurred.
coldfusion.license.LicenseManager$LicenseIllegalAccessException: A License exception has occurred.
at coldfusion.license.LicenseManager.byte(Unknown Source)
at coldfusion.license.LicenseManager.checkJSP(Unknown Source)
at coldfusion.license.JspLicenseServlet.service(Unknown Source)
at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89)
at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106)
at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:284)
at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543)
at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203)
at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320)
at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428)
at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
07/27 03:14:19 Information [scheduler-2] - Run Client Storage Purge
07/27 04:21:19 Information [scheduler-1] - Run Client Storage Purge
07/27 05:28:19 Information [scheduler-2] - Run Client Storage Purge
07/27 06:35:19 Information [scheduler-0] - Run Client Storage Purge
07/27 07:42:19 Information [scheduler-2] - Run Client Storage Purge
07/27 08:49:19 Information [scheduler-2] - Run Client Storage Purge
07/27 09:56:19 Information [scheduler-1] - Run Client Storage Purge
07/27 11:03:19 Information [scheduler-1] - Run Client Storage Purge
Starting Macromedia JRun 4.0 (Build 108487), coldfusion server
At this point there is some process or app that is taking all the CPU bandwidth which stops all processes. (This is a virtualized installation.)
The server needs to be restarted and ColdFusion re-started after the server has re-initialized itself. I am wondering whether the license exception is the cause of the hang on the system. After restarting the server and then re-starting ColdFusion today, the following entries were made in the cfserver.log file (there were no entries in the server log at all):
07/28 09:12:53 warning Unable to open /opt/coldfusion8/runtime/lib/license.properties
07/28 09:12:54 info JRun Naming Service listening on *:2930
07/28 09:12:54 info No JDBC data sources have been configured for this server (see jrun-resources.xml)
07/28 09:12:54 info JRun Proxy Server listening on *:51800
07/28 09:12:54 info Deploying enterprise application "Adobe_ColdFusion_8" from: file:/opt/coldfusion8/
07/28 09:12:55 info Deploying web application "Adobe ColdFusion 8" from: file:/opt/coldfusion8/
07/28 09:12:56 INFO License Service: Flex 1.5 CF Edition enabled
07/28 09:12:56 INFO Starting Flex 1.5 CF Edition
07/28 09:12:57 user JSPServlet: init
07/28 09:12:57 user ColdFusionStartUpServlet: init
07/28 09:12:57 user ColdFusionStartUpServlet: ColdFusion: Starting application services
07/28 09:12:57 user ColdFusionStartUpServlet: ColdFusion: VM version = 1.6.0_01-b06
07/28 09:12:57 Information [main] - Starting logging...
07/28 09:12:57 Information [main] - Starting license...
07/28 09:12:58 Information [main] - Standard Edition enabled
07/28 09:12:58 Information [main] - Starting crypto...
07/28 09:12:58 Information [main] - Starting security...
07/28 09:12:58 Information [main] - Starting scheduler...
07/28 09:12:58 Information [main] - Starting WatchService...
07/28 09:12:58 Information [main] - Starting debugging...
07/28 09:12:58 Information [main] - Starting sql...
07/28 09:12:58 Information [main] - Pool Manager Started
07/28 09:12:58 Information [main] - Starting mail...
07/28 09:12:58 Information [main] - Starting runtime...
07/28 09:12:59 Information [main] - CORBA Configuration not enabled
07/28 09:12:59 Information [main] - Starting cron...
07/28 09:12:59 Information [main] - Starting registry...
07/28 09:12:59 Information [main] - Starting client...
07/28 09:12:59 Information [main] - Starting xmlrpc...
07/28 09:12:59 Information [main] - Starting graphing...
07/28 09:12:59 Information [main] - Starting verity...
07/28 09:12:59 Information [main] - Starting archive...
07/28 09:12:59 Information [main] - Starting document...
07/28 09:12:59 Information [main] - Starting eventgateway...
07/28 09:12:59 Information [main] - Starting Event Backend Handlers.
07/28 09:12:59 Information [main] - Initialized EventRequestDispatcher with a Thread Pool size of 1.
07/28 09:12:59 Information [main] - Initializing EventRequestHandler
07/28 09:12:59 Information [main] - Starting Event Gateways.
07/28 09:12:59 Information [main] - Starting FlexAssembler...
07/28 09:12:59 Information [main] - Starting .NET...
07/28 09:12:59 Information [main] - Starting Monitoring...
07/28 09:12:59 Information [main] - ColdFusion started
07/28 09:12:59 user ColdFusionStartUpServlet: ColdFusion: application services are now available
07/28 09:12:59 user CFMxmlServlet: init
07/28 09:12:59 user CFMxmlServlet: Macromedia Flex Build: 87315.134646
07/28 09:12:59 INFO Macromedia Flex Build: 87315.134646
07/28 09:13:01 user CFSwfServlet: init
07/28 09:13:02 user CFCServlet: init
07/28 09:13:02 user FlashGateway: init
07/28 09:13:02 user MessageBrokerServlet: init
07/28 09:13:03 user CFFormGateway: init
07/28 09:13:03 user CFInternalServlet: init
Server coldfusion ready (startup time: 10 seconds)
Thank you for any guidance you can share with me. I am new at using this product.The license.properties error is standard for CF. This file
will be found in coldfusion8/lib as the server starts up. But
clearly you have other issues. Why the deployer service is not
running is the real issue. Check your logs under coldfusion8\logs
and coldfusion8\runtime\logs. If this is a new install, you may
want to just uninstall and reinstall. -
Adobe x unable to open any pdf, or change properties
Just had an update to Adobe reader x and now I am unable to open any pdf email attachments, any saved older pdfs on local or network drive. Followed a thread on here from last fall, and attempted to open the properties of the reader, but this caused a run-time error and crashed the program completely. Update of the program was difficult, as I could not get the adobe website to work with MS IE. and ended up loading Firefox to get the download.
System is Windows XP professional, SP3, 2gb RAM, and working flawlessly prior to the update.
any current ideas of repair or patch without rolling back or going to alternate pdf readers?Try disabling Protected Mode (see Pat's response here: Anyone having problems with the Acrobat Reader 11.0.9 update on Win7 X64?) and see if that helps...
-Mike -
I updated Adobe flash player and now i'm unable to open Opera and I have to use the power button to shut the computer down.
How do you delete programs?
thanksIf Flash Player is indeed the problem I would suggest using the Adobe Uninstaller.
Have you tried using a different browser such as Chrome, Firefox or Safari to see if they have a problem with Flash? -
display "Application over 20MB" when I type OK button, the appearance will not go away and make me unable to open other applications, what to do and whether it must be restarted?
The 20 meg message is the download limit for 3G. If you can't get rid of the 'OK' message then you can do a reset by pressing and holding both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
You should be able to download the apps by switching to wifi on your iPad or downloading them on your computer's iTunes and syncing them or dragging and dropping them over to the iPad device. -
i am unable to open any links on any mail messages. thhis includes any buttons, such as view or buy when on a group on mail for example.
So I'm not Mary Frances. I'm her husband who is force to deal with this opaque and obnoxious equipment (iPad). With the iOS 7 update she could no longer follow web links by tapping them in an e-mail (it did work from a web page). After an hour of web searching, experimenting and rejecting the offer of an answer from apple help for only $20, I found that, if in settings/safari, you turn off the "Do Not Track" button, the ability to follow links in an e-mail by a tapping is magically returned.
Flash! I just went back to the ipad and turned on the "Do Not Track" button -- just to test my discovery. Predictably (by my cynical myself) you can still open a link in an e-mail, so I don't know what's happening/happen. But I'm not surprised. -
I am unable to open the back of my wirelss mouse to change the batteries which I've changed several times before. The black release button on the back does not seem to work. I've tried using a couple of small screwdrivers to pry it open but I don't want to break the plastic and therefore the mouse. Anyone have any other ideas or do I need to buy a new mouse?
You may have caused more damage with the screwdrivers. It can be tricky as it works the opposite way to what you may first imagine. Hold the mouse, bottom upwards, the black catch nearest to you. Then flick the black catch towards you with your nail. (Not away from you towards where a space is showing).
-
I purchased a new BlackBerry Z30 recently from http://store.shopblackberry.com/store/bbrryus/en_US/pd/productID.298806900/categoryID.66826600/paren... and my Phone Model number is STL 100-5. I also purchased a Z30 Leather flip case manufactured by BlackBerry. I am using my BlackBerry Z30 along with the Z30 Leather flip case.
1) Within the first 2 weeks of receiving and using the new BB Z30 device, I noticed a problem of screen not responding some times. My phone has been freezed at the lock screen. My phone is not responding to any key except for the power button. So, I had an option of only restart/Turn Off my BlackBerry Z30 device. All the time whenever I had this problem, I have to restart my device in order to make it work properly again. I complained about this issue with BlackBerry Technical Support. They assisted me to reset the device to factory settings by taking a full backup. After reset also, I still had the same issue.
2) I am using Sandisk Extreme microSD card of 32GB with my BB Z30 device. Some times due to the restart option, all the data which I had on my microSD card is being erased and is filled with an unknown files.
3) I'm also unable to open some pictures which I have taken using BlackBerry Z30. As I observed, most of the pictures which I taken using Blackberry Z30 are unable to be open/view them after a few days. Still, I am able to observe the properties of those pictures. They are in JPEG format only.
4)Also If I create a Word Document on BlackBerry Z30 using Docs to Go Application and saved it. After closing that particular document and If I try to open it, the document file is not opening and projecting me an error of "This is not a valid .Doc file", but while I check the properties of that particular document it is in .doc format. I tried to transfer the file to my laptop using bluetooth. After a few seconds (approx 2-3 seconds) automatically the transferring is cancelled by the BlackBerry Z30 device. However, I tried to transfer the file within that short time using Bluetooth. While I tried to open it on my laptop using Microsoft Office 2013, the file is displaying with a squares of upto 4 pages while I had a content in it of 3 lines only. While I opened my file using Microsoft Office 2013, there is only squares available in that document.
5) My new BlackBerry Z30 is taking a long time of approximately 6-7 hours to charge the device from 10% to 100%
I request someone to help me with this issues. I would like to thank everyone who can help me with these issues in advance.
Solved!
Go to Solution.On 7th of Jan 2015 I made my device to factory reset. Also I removed microSD card from my device. As I observed for these 3 days, one time while I received a missed call, I tried to have a look at it. I observed that my screen has been freeze at the receiving call position and its not responding. I tried to close and reopened the display of my device with a flip case which I'm currently using for my device. At this time, after 3-4 swipes to unlock the device, again its back into working condition.
About Documents, I'm able to create, save and open the documents without any issues till now.
About Pictures, they are also working fine without any issues.
I also observed the charging time as approximately 3 hours for charging the device from 14% to 100%. -
Unable to open report from forms 9i
Hi,
Unable to open report from forms 9i and got the following error.
Error : REP-0503, You did not specify the name of a report
Steps followed
1.Created report object in forms using existing report
2.changed the following properties
Exec. mode : runtime
comm mode : synchronous
3. When -button -Pressed Trigger;
Declare
Repid report_object;
Begin
repid:=find_report_object('report4');
v_rep:=run_report_object(repid);
End;Hi,
did you specify a Reports rdf or rep file that should be run. You can do this either in a trigger or as a property of the Reports object node in Forms.
Frank -
I am unable to open my Photoshop program after installing the entire Creative Suite: Premium Production 6. All other programs work, but with Photoshop it says that it "Could not open a scratch file because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the 'Properties' command in the Windows Explorer to unlock the file." Then I select "OK" and the next message comes up "Could not initialize Photoshop because the file is locked, you do not have the necessary permissions, or another program is using the file. Use the 'Properties' command in the Windows Explorer to unlock this file. I installed all of the programs on the same day from a CD. I need this fixed immediately.
I am not interested in switching to Creative Cloud, so don't even suggest it. I spoke to Mashmi (or something to that effect) on the "Support" Chat and there was absolutely no support. Useless actually.
Thanks in advance.Could not open a scratch file because the file is locked or you do not have the necessary access privileges. (…) | Mylen…
Mylenium -
Brand new Mac Book Pro
Purchased in Mexico's Department store Liverpool on June 20th 2012
Purchased Memory upgade to 8Gb, on june 27th, at Apple Store Memorial City, Houston
Upgraded memory from 4Gb to 8Gb on June 28th.
Tried to write on my external HD (previously written on a windows based PC) with no success.
Upon reccomendation from a Mac assistant, copied all my external HD contents into my Mac Hard drive.
Then formatted my external HD and copied back all my information to it.
deleted all the information from my MacBook Pro HD.
Attempted to repeat the same operation with another external HD, but got a message saying there was not enough epace on the computer HD (even though I have a 750Gb Hard Drive.
Looked in the trash bin and there it was, all the information previously deleted..
Could not empty the trash bin, although I got a message asking me to safely delete all the information from the trash bin,
Could not get enough space released, after several attpempts the trash bin was finally emptied.
All happy getting acquainted with my new MacBook Pro. Two days later, got a gray screen and not able to start the computer.
Looking in to Mac support I found article http://support.apple.com/kb/TS2570 and followed instructions to perform a safe boot:
"Perform a Safe Boot
Simply performing the Safe Boot may resolve this issue.
Shut down your Mac. If necessary, hold your Mac's power button for several seconds to force it to power down.
Start your Mac, then immediately hold the Shift key. This performs a Safe Boot. Advanced tip: If you want to
see the status of a Safe Boot as it progresses, you can hold Shift-Command-V during start up (instead of just Shift).
Note: A Safe Boot takes longer than a typical start up because it includes a disk check and other operations.
The following is the script that appears on the screen upon safe boot. and halt after the last line.
AppleACPICPU:Processor Id=6 LocalAplicId=255 Disabled
AppleACPICPU:Processor Id=7 LocalAplicId=255 Disabled
AppleACPICPU:Processor Id=8 LocalAplicId=255 Disabled
calling mpo_policy_init for TMSafetyNet
Security policy loaded: Safety net for Time Machine (TMSafetyNet)
calling mpo_policy_init for Sandbox
Security policy loaded: Seatbelt sandbox policy (Sandbox)
calling mpo_policy_init for Quarantine
Security policy loaded: Quarantine Policy (Quarantine)
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All Rights Reserved.
MAC Framework Succesfully initializad
using 16384 buffer headers and 10240 cluster IO buffer headers
IOAPIC: Version 0x20 Vextors 64:87
ACPI: System State [SO S3 S4 S5] (S3)
PFM64 (36cpu) 0xf10000000, 0xf0000000
Aplconsole relocated to 0xf1000000
PCI configuration changed (bridge=16 device=4 cardbus=0)
[ PCI configuration end, bridges 12 devices 16 ]
Firewire (OHCI) Lucent ID 5901 built-in now active, GUID 3c0754fffe9b2aa2; max speed s800.
Pthread support ABORTS when sync kernel primitives misused
com.apple.AppleFSCompressionTypeZlib kmod start
com.apple.AppleFSCompressionTypeDataless kmod start
com.apple.AppleFSCompressionTypeZlib load succeeded
com.apple.AppleFSCompressionTypeDateless load succeeded
AppleIntelCPUPowerManagementClient: ready
BTCOEXIST off
wl0: Broadcom BCM4331 802.11 Wireless controller
5.100.98.75
AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitializad
rooting via boot-uuid from /chosen: 6E918706-FC0D-37460-A3A0-6268A51DF93B
Waiting on <dict ID="0"><key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleAPIPCI/SATA@1F,2/AppleIntelPchSe riesAHCI/PRT0@0/AOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlock
storageevice /IoBlockStorageDriver/TOSHIBA MK7559GSXF Media/IOGUIDPartit
BSD root: disk0s2, major 14, minor 2
Kernel is LP64
com.apple.launchd 1 com.apple.launchd 1 *** launchd[1] has started up. ***
com.apple.launchd 1 com.apple.launchd 1 *** Verbose boot, will log to /dev/console. ***
Running fsck on the boot volume...
** /dev/rdisk0s2 (NO WRITE)
** Root file system
Executing FSCK_HFS (version diskdev_cmds-540.1~25).
BootCacheControl: UNable to open /Var/db/BootCache.playlist:2 No such file or directory
launchctl:Dubious permissions on file (skipping): /Library/LaunchDaemons
launchctl:Dubious permissions on file (skipping): /System/Library/LaunchDaemons
Any help or suggestions on what to do next would be welcomed.
I am in the middle of the Atlantick, stuck with a brand new, non working Apple MacBook Pro.
Best regards
Sergio RamosReinstalling MacOS does NOT fix the problem for me. I'm still searching a solution !
Bernard -
I installed iOS7 on my iPhone5 and now I am unable to open iTunes - the screen just stays blank.
I have checked date and time and wifi settings.
Not sure what else to do.
I do have iMatch active on my device and its working fine on my other iPohne with iOS7 installed.
Any help please!Have you tried logging out of your account on your phone by tapping on your id in Settings > iTunes & App Store and then logging back in ? If it's still the same after that then try a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the equivalent of a reboot.
-
My .jpg's have ALL suddenly been converted to .pdf's and I am unable to open them
Using Windows 8.1, when I went to view some jpg's earlier today, I found they now show as "Adobe Acrobat Documents." When I try to open one, I get the error message that they are jpg's and Adobe is unable to open a jpg.???
And it was easy -- once I went to "Properties" in Windows Explorer. That was the tough part -- finding where to make the change.
Thank you for your help.
Bob Slone
[privated information removed by moderator]
From: ~graffiti <[email protected]>
To: Robert Slone <[email protected]>
Sent: Wednesday, January 7, 2015 4:09 PM
Subject: My .jpg's have ALL suddenly been converted to .pdf's and I am unable to open them
My .jpg's have ALL suddenly been converted to .pdf's and I am unable to open them
created by ~graffiti in Adobe Reader - View the full discussionEasy enough to fix. You need to change your system file associations to whatever program you used in the past to open .jpg files. Here's how -
> Choose the apps Windows uses by default - Windows Help If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7075247#7075247 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7075247#7075247 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Adobe Reader by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624. -
Unable to open .chm file from a link in Weblogic 7.0
Unable to open .chm file from a link in weblogic server. But the same
jsp code works in Websphere
Sample Code :
<!-- < a href="JavaScript:window.navigate('help/manual.CHM')">
Linked Text</a> -->
The above link, works well in websphere. help is a folder that
resides in the server. But when i tried to execute the same in
Weblogic, some junk characters appeared . so i tried to direct the
link to Display.jsp and passed the path of the chm file as the
parameter. I cleared teh out buffer using out.clearBuffer() . i set
the content type to application/x-msdownload and also set the header
to content disposition.
Nothing worked .
I also tried another way.. That is the following
I even tried including the mime type
<mime-mapping>
<extension>chm</extension>
<mime-type>application/x-msdownload</mime-type>
</mime-mapping>
in the web.xml file. and still it doesnt work
Nothing Worked . What should i do ? I need immediate help to sort out
this issue. Can anybody help me
- AngelThis could be a Launch Services issue. The following article describes how to manually reset Launch Services — the notes at the bottom of the article also provide information about the side effects of deleting each of the files involved:
Resetting Launch Services
If you prefer using a cache cleaning utility instead of following the manual procedure described in the previous article, take a look at this other article for general troubleshooting and cache-cleaning procedures. Actually, you should also verify/repair the startup disk (not just permissions), as described there:
Resolving Disk, Permission, and Cache Corruption
The most appropriate utility for this particular problem probably is Tiger Cache Cleaner, but you may also want to consider other utilities, such as OnyX, or Cache Out X, which are free. Whatever utility you choose, be sure to read this first:
Side effects of System cache cleaning
As an example, this is how you should proceed with OnyX:
1. Quit all applications.
2. Launch OnyX and enter your administrator password.
3. Go to Maintenance > Reset and check LaunchServices database.
4. Un-check any other pre-checked options.
5. Click the Execute button.
6. Restart the computer.
BTW, if you’re running Mac OS X 10.4 (Tiger), as your profile indicates, it would have been more appropriate to discuss this in the Mail & Address Book - Tiger forum. If the discussion applies to both Mail 1.x and Mail 2.x, it doesn’t really matter, but it’s difficult to know that in advance.
Maybe you are looking for
-
HT204150 iCloud Contacts Not Syncing
Product - iPhone 6 128GB Space Grey iOS - Latest 8.1.3 My contacts have stopped syncing with my iCloud account. I have done all the usual suggested steps (restored, new setup, computer back up, etc...) and then was provided a replacement phone. The i
-
BAPI For Shipment Change/Update
Hi, I need a BAPI to update/change Shipment. I am aware of BAPI_SHIPMENT_CHANGE..but it is not released officially from SAP. This is a online job to change the shipment. I need a BAPI rather than a FM. Let me know some generic BAPI's which will chang
-
Hello and thanks for your time. The program I am trying to develop is something that would calculate the start value of a gymnastics routine. Basically there are two components to it: Firstly there is a drop down menu with a long list of different gy
-
Problem in OKS_CONTRACTS_PUB
Hi, I am making a conversion for contracts. Here is my code r_k_header_rec.contract_number := v_contract_number; --M203125v3 r_k_header_rec.start_date := to_date (v_contract_header.start_date,'MM/DD/YYYY'); r_k_header_rec.end_date := to_date(v_contra
-
HT1414 How to upgrade IOS in iphone 3G & Use whatsapp
Dear Sir, I'm using Iphone 3G & installed whatsapp in my mobile for long time. On Jan 3, 2013 I got message to upgrade whatsapp, when I press upgrade after that I can't install whatsapp in my mobile. It's asking IOS 4.3 & above and my mobile using IO