Unable to open console on display :0

Hi,
i have a ultra 5; i replaced one of the seagate barracuda hdd of 9.1 GB with a WD 80GB ... So, now i have 2 hdds: 1 x barracuda 9.1GB and 1 x wd 80GB ... on the same ide cable (Cable Select) while on the secondary ide i have the cdrom - master ...
Then, i successfuly installed solaris 10 (build 63) ...
Everything looks ok, the only exception is that i cannot open the console (cde) ...
If i check /var/dt/Xerrors:
Thu Dec 9 22:27:59 2004
error (pid 325): Server for display :0 terminated unexpectedly 0
Thu Dec 9 22:28:01 2004
error (pid 325): Server for display :0 can't be started.
Couldn't open display connection
Nothing else ...
If you have a workaround/possible fix , please advise ...
Thank you for your time and help, catalin ciontu .

Personally I'm not very fond of the use of CableSelect, but who am I ! If it works than leave it like that.
Most likely the video issue you have is due to a general video driver issue for build 63.
Your best bet is to go up to build 72.

Similar Messages

  • Unable to open X windows display

    hi
    I'm trying to transfer some very old PV-wave (visual numerics) routines into solaris 10 and I keep getting the following errors
    WTINIT: Unable to open X windows display.
    WwError: Unable to create top level shell.
    Now I know I haven't given much info here but I have a feeling that its simply that I haven't set some paths properly. Where does one normally call the X windows display from.
    Much thanks
    Anna
    Sunblade 1000 running solaris 10.

    Hi
    Are you logged in to the machine remotely or locally?
    If locally, then you shouldn't need to change anything.
    There are two things that normally control the X display: the DISPLAY environment variable and the X authority. DISPLAY is usually set to [hostname]:0.0 (unless you have more than one display or are using an X server that emulates mutliple displays).
    For X authority, you can either use xhost, which is simple but poses security issues, or xauth, less simple but more secure. If you are safely behind a firewall, and you trust your colleagues, then "xhost + [hostname]" is the quickest solution.
    Paul

  • Hotmail unable to open messages - javacript:; display at bottom right

    Unable to open messages in Hotmail, it works OK with Google Chrome... A real pain in my white cheeks... the response to this issue ia also very poor !!!
    == URL of affected sites ==
    http://sn133w.snt133.mail.live.com

    I had this problem : reinstalled firefox etc to no effect. Fixed it by clearing cookies and emptying cache - a suggestion found on a Linux forum. Tools>Options>Privacy>tick' clear history when firefox closes' , close firefox and reopen. (remember to untick if you don't want cookies etc to be cleared every time you close firefox)

  • Unable to open console

    I have just installed Adobe Connect, but when I try to open up the console (Configure Connect Enterprise Server). I get "IE cannot display the webpage". The page is http://localhost:8510/console.
    Its installed on a brand new Windows Server 2008 64bit & SQL 2008. The Windows firewall is off.
    Also, I am unable to start the Adobe Connect Service service. It is set to automatic, but wont start and gives the error - "Some services stop automatically if they are not in use by other services or programs"
    Any assistance would be greatly appreciated.
    Thanks!

    Your installation did not complete successfully. I suggest you call into Support and have them look at the logs to tell you what happened. Sometimes they can advise how to fix an XML file that has issues...but please call in and have them take a look.

  • [SOLVED] Rad 7790+Catalyst = Error: unable to open display (null)

    Radeon HD 7790 + Catalyst = Error: unable to open display (null)
    Greetings,
    I've installed Arch 2 days ago(migrated from Fedora), but I'm still a newbie to linux, so please have patience.
    I've bought AMD Radeon HD 7790 recently and decided that it's time to upgrade system, but since then I had only problems with it. No LiveCD I tried (Fedora 20, Mint)  worked properly in graphics mode, so I suspected problem in built-in drivers and moved to linux with text-only installation (Arch), so I could install drivers later.
    I've followed wiki manual and installed catalyst, removed open source driver, added nomodeset parametr to GRUB etc. but I'm still stucked, because Xorg won't start(black screen and errors presented in Logs). Tried googling, but learned nothing except Radeon proprietary drivers are comparable to suicide.
    Versions:
    Kernel: 3-10.40-1-lts (catalyst_build_module sucessful)
    Catalyst: 14.4-10
    Xorg: 1.14.5-11
    Logs&Configs:
    lsmod
    fglrx 8672295 0
    amd_iommu_v2 7174 1 fglrx
    button 4765 1 fglrx
    fglrxinfo
    Error: unable to open display (null)
    Xorg.0.conf
    [ 2632.576]
    X.Org X Server 1.14.5
    Release Date: 2013-12-12
    [ 2632.594] X Protocol Version 11, Revision 0
    [ 2632.600] Build Operating System: Linux 3.12.6-1-ARCH x86_64
    [ 2632.606] Current Operating System: Linux localhost 3.10.40-1-lts #1 SMP Tue May 13 12:50:03 UTC 2014 x86_64
    [ 2632.606] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-lts root=UUID=4f60e723-44e9-4264-8d6c-ca62c43cf69c rw quiet nomodeset
    [ 2632.619] Build Date: 08 January 2014 01:35:51PM
    [ 2632.629]
    [ 2632.635] Current version of pixman: 0.32.4
    [ 2632.646] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 2632.646] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 2632.671] (==) Log file: "/var/log/Xorg.0.log", Time: Sun May 25 00:53:45 2014
    [ 2632.677] (==) Using config file: "/etc/X11/xorg.conf"
    [ 2632.684] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 2632.690] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 2632.690] (==) ServerLayout "aticonfig Layout"
    [ 2632.690] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
    [ 2632.690] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
    [ 2632.690] (**) | |-->Device "aticonfig-Device[0]-0"
    [ 2632.690] (==) Automatically adding devices
    [ 2632.690] (==) Automatically enabling devices
    [ 2632.690] (==) Automatically adding GPU devices
    [ 2632.690] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
    [ 2632.690] Entry deleted from font path.
    [ 2632.690] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 2632.690] Entry deleted from font path.
    [ 2632.690] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 2632.690] Entry deleted from font path.
    [ 2632.690] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 2632.690] Entry deleted from font path.
    [ 2632.690] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 2632.690] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 2632.690] Entry deleted from font path.
    [ 2632.690] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 2632.690] (==) FontPath set to:
    /usr/share/fonts/misc/
    [ 2632.690] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 2632.690] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 2632.690] (II) Loader magic: 0x7fac20
    [ 2632.690] (II) Module ABI versions:
    [ 2632.690] X.Org ANSI C Emulation: 0.4
    [ 2632.690] X.Org Video Driver: 14.1
    [ 2632.690] X.Org XInput driver : 19.1
    [ 2632.691] X.Org Server Extension : 7.0
    [ 2632.692] (--) PCI:*(0:2:0:0) 1002:665c:1458:226a rev 0, Mem @ 0xc0000000/268435456, 0xde800000/8388608, 0xdffc0000/262144, I/O @ 0x0000e800/256, BIOS @ 0x????????/131072
    [ 2632.698] Initializing built-in extension Generic Event Extension
    [ 2632.704] Initializing built-in extension SHAPE
    [ 2632.710] Initializing built-in extension MIT-SHM
    [ 2632.717] Initializing built-in extension XInputExtension
    [ 2632.723] Initializing built-in extension XTEST
    [ 2632.728] Initializing built-in extension BIG-REQUESTS
    [ 2632.734] Initializing built-in extension SYNC
    [ 2632.740] Initializing built-in extension XKEYBOARD
    [ 2632.745] Initializing built-in extension XC-MISC
    [ 2632.751] Initializing built-in extension SECURITY
    [ 2632.756] Initializing built-in extension XINERAMA
    [ 2632.761] Initializing built-in extension XFIXES
    [ 2632.767] Initializing built-in extension RENDER
    [ 2632.772] Initializing built-in extension RANDR
    [ 2632.777] Initializing built-in extension COMPOSITE
    [ 2632.782] Initializing built-in extension DAMAGE
    [ 2632.787] Initializing built-in extension MIT-SCREEN-SAVER
    [ 2632.792] Initializing built-in extension DOUBLE-BUFFER
    [ 2632.797] Initializing built-in extension RECORD
    [ 2632.802] Initializing built-in extension DPMS
    [ 2632.806] Initializing built-in extension X-Resource
    [ 2632.811] Initializing built-in extension XVideo
    [ 2632.816] Initializing built-in extension XVideo-MotionCompensation
    [ 2632.821] Initializing built-in extension XFree86-VidModeExtension
    [ 2632.825] Initializing built-in extension XFree86-DGA
    [ 2632.830] Initializing built-in extension XFree86-DRI
    [ 2632.834] Initializing built-in extension DRI2
    [ 2632.834] (II) "glx" will be loaded by default.
    [ 2632.834] (II) LoadModule: "glx"
    [ 2632.834] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 2632.835] (II) Module glx: vendor="Advanced Micro Devices, Inc."
    [ 2632.835] compiled for 6.9.0, module version = 1.0.0
    [ 2632.839] Loading extension GLX
    [ 2632.839] (II) LoadModule: "fglrx"
    [ 2632.839] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
    [ 2632.863] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
    [ 2632.863] compiled for 1.4.99.906, module version = 14.10.2
    [ 2632.863] Module class: X.Org Video Driver
    [ 2632.863] (II) Loading sub module "fglrxdrm"
    [ 2632.863] (II) LoadModule: "fglrxdrm"
    [ 2632.863] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
    [ 2632.863] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
    [ 2632.863] compiled for 1.4.99.906, module version = 14.10.2
    [ 2632.863] (II) AMD Proprietary Linux Driver Version Identifier:14.10.2
    [ 2632.864] (II) AMD Proprietary Linux Driver Release Identifier: 14.10.1006
    [ 2632.864] (II) AMD Proprietary Linux Driver Build Date: Apr 17 2014 21:15:33
    [ 2632.864] (--) using VT number 2
    [ 2632.885] (WW) Falling back to old probe method for fglrx
    [ 2632.899] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
    [ 2632.901] ukiDynamicMajor: found major device number 250
    [ 2632.901] ukiDynamicMajor: found major device number 250
    [ 2632.901] ukiOpenByBusid: Searching for BusID PCI:2:0:0
    [ 2632.901] ukiOpenDevice: node name is /dev/ati/card0
    [ 2632.901] ukiOpenDevice: open result is 11, (OK)
    [ 2632.901] ukiOpenByBusid: ukiOpenMinor returns 11
    [ 2632.901] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
    [ 2632.904] (--) Chipset Supported AMD Graphics Processor (0x665C) found
    [ 2632.904] (WW) fglrx: No matching Device section for instance (BusID PCI:0@2:0:1) found
    [ 2632.905] (II) fglrx(0): pEnt->device->identifier=0x11bea10
    [ 2632.905] (II) fglrx(0): === [xdl_xs114_atiddxPreInit] === begin
    [ 2632.905] (II) Loading sub module "vgahw"
    [ 2632.905] (II) LoadModule: "vgahw"
    [ 2632.905] (II) Loading /usr/lib/xorg/modules/libvgahw.so
    [ 2632.905] (II) Module vgahw: vendor="X.Org Foundation"
    [ 2632.906] compiled for 1.14.5, module version = 0.1.0
    [ 2632.906] ABI class: X.Org Video Driver, version 14.1
    [ 2632.906] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
    [ 2632.906] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    [ 2632.906] (==) fglrx(0): Default visual is TrueColor
    [ 2632.906] (**) fglrx(0): Option "DPMS" "true"
    [ 2632.906] (==) fglrx(0): RGB weight 888
    [ 2632.906] (II) fglrx(0): Using 8 bits per RGB
    [ 2632.906] (==) fglrx(0): Buffer Tiling is ON
    [ 2632.906] (II) Loading sub module "fglrxdrm"
    [ 2632.906] (II) LoadModule: "fglrxdrm"
    [ 2632.906] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
    [ 2632.906] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
    [ 2632.906] compiled for 1.4.99.906, module version = 14.10.2
    [ 2632.908] ukiDynamicMajor: found major device number 250
    [ 2632.908] ukiDynamicMajor: found major device number 250
    [ 2632.908] ukiOpenByBusid: Searching for BusID PCI:2:0:0
    [ 2632.908] ukiOpenDevice: node name is /dev/ati/card0
    [ 2632.908] ukiOpenDevice: open result is 13, (OK)
    [ 2632.908] ukiOpenByBusid: ukiOpenMinor returns 13
    [ 2632.908] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
    [ 2632.908] (**) fglrx(0): NoAccel = NO
    [ 2632.909] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
    [ 2632.909] (--) fglrx(0): Chipset: "AMD Radeon HD 7700 Series" (Chipset = 0x665c)
    [ 2632.909] (--) fglrx(0): (PciSubVendor = 0x1458, PciSubDevice = 0x226a)
    [ 2632.909] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
    [ 2632.909] (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
    [ 2632.909] (--) fglrx(0): MMIO registers at 0xdffc0000
    [ 2632.909] (--) fglrx(0): I/O port at 0x0000e800
    [ 2632.909] (==) fglrx(0): ROM-BIOS at 0x000c0000
    [ 2632.909] (II) fglrx(0): AC Adapter is used
    [ 2632.914] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
    [ 2632.914] (II) Loading sub module "vbe"
    [ 2632.914] (II) LoadModule: "vbe"
    [ 2632.915] (II) Loading /usr/lib/xorg/modules/libvbe.so
    [ 2632.915] (II) Module vbe: vendor="X.Org Foundation"
    [ 2632.915] compiled for 1.14.5, module version = 1.1.0
    [ 2632.915] ABI class: X.Org Video Driver, version 14.1
    [ 2632.915] (II) fglrx(0): VESA BIOS detected
    [ 2632.915] (II) fglrx(0): VESA VBE Version 3.0
    [ 2632.915] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
    [ 2632.915] (II) fglrx(0): VESA VBE OEM: AMD ATOMBIOS
    [ 2632.915] (II) fglrx(0): VESA VBE OEM Software Rev: 15.32
    [ 2632.915] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2010, Advanced Micro Devices, Inc.
    [ 2632.915] (II) fglrx(0): VESA VBE OEM Product: BONAIRE
    [ 2632.915] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
    [ 2632.915] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
    [ 2632.915] (--) fglrx(0): Video RAM: 2097152 kByte, Type: GDDR5
    [ 2632.915] (II) fglrx(0): PCIE card detected
    [ 2632.915] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
    [ 2632.915] (WW) fglrx(0): board is an unknown third party board, chipset is supported
    [ 2632.915] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf400000000, MCFBSize = 0x80000000)
    [ 2632.915] (II) fglrx(0): RandR 1.2 support is enabled!
    [ 2632.915] (II) fglrx(0): RandR 1.2 rotation support is enabled!
    [ 2632.915] (II) Loading sub module "fb"
    [ 2632.915] (II) LoadModule: "fb"
    [ 2632.916] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 2632.916] (II) Module fb: vendor="X.Org Foundation"
    [ 2632.916] compiled for 1.14.5, module version = 1.0.0
    [ 2632.916] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 2632.916] (II) fglrx(0): EDID Management option: EDID Management is enabled
    [ 2632.916] (II) Loading sub module "ddc"
    [ 2632.916] (II) LoadModule: "ddc"
    [ 2632.916] (II) Module "ddc" already built-in
    [ 2633.034] (II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
    [ 2633.034] (II) fglrx(0): Output DFP2 has no monitor section
    [ 2633.034] (II) fglrx(0): Output DFP3 has no monitor section
    [ 2633.034] (II) fglrx(0): Output DFP4 has no monitor section
    [ 2633.034] (II) fglrx(0): Output DFP5 has no monitor section
    [ 2633.034] (II) fglrx(0): Output DFP6 has no monitor section
    [ 2633.034] (II) fglrx(0): Output DFP7 has no monitor section
    [ 2633.034] (II) fglrx(0): Output CRT1 has no monitor section
    [ 2633.034] (II) Loading sub module "ddc"
    [ 2633.034] (II) LoadModule: "ddc"
    [ 2633.034] (II) Module "ddc" already built-in
    [ 2633.034] (II) fglrx(0): Connected Display0: CRT1
    [ 2633.034] (II) fglrx(0): Display0 EDID data ---------------------------
    [ 2633.034] (II) fglrx(0): Manufacturer: GSM Model: 4b31 Serial#: 78077
    [ 2633.034] (II) fglrx(0): Year: 2007 Week: 7
    [ 2633.034] (II) fglrx(0): EDID Version: 1.3
    [ 2633.034] (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
    [ 2633.034] (II) fglrx(0): Sync: Separate Composite SyncOnGreen
    [ 2633.034] (II) fglrx(0): Max Image Size [cm]: horiz.: 38 vert.: 30
    [ 2633.034] (II) fglrx(0): Gamma: 2.20
    [ 2633.034] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
    [ 2633.034] (II) fglrx(0): First detailed timing is preferred mode
    [ 2633.034] (II) fglrx(0): redX: 0.639 redY: 0.342 greenX: 0.297 greenY: 0.615
    [ 2633.034] (II) fglrx(0): blueX: 0.146 blueY: 0.068 whiteX: 0.313 whiteY: 0.329
    [ 2633.034] (II) fglrx(0): Supported established timings:
    [ 2633.034] (II) fglrx(0): 720x400@70Hz
    [ 2633.034] (II) fglrx(0): 640x480@60Hz
    [ 2633.034] (II) fglrx(0): 640x480@67Hz
    [ 2633.034] (II) fglrx(0): 640x480@72Hz
    [ 2633.034] (II) fglrx(0): 640x480@75Hz
    [ 2633.034] (II) fglrx(0): 800x600@56Hz
    [ 2633.034] (II) fglrx(0): 800x600@60Hz
    [ 2633.034] (II) fglrx(0): 800x600@72Hz
    [ 2633.034] (II) fglrx(0): 800x600@75Hz
    [ 2633.034] (II) fglrx(0): 832x624@75Hz
    [ 2633.034] (II) fglrx(0): 1024x768@60Hz
    [ 2633.034] (II) fglrx(0): 1024x768@70Hz
    [ 2633.034] (II) fglrx(0): 1024x768@75Hz
    [ 2633.035] (II) fglrx(0): 1280x1024@75Hz
    [ 2633.035] (II) fglrx(0): 1152x864@75Hz
    [ 2633.035] (II) fglrx(0): Manufacturer's mask: 0
    [ 2633.035] (II) fglrx(0): Supported standard timings:
    [ 2633.035] (II) fglrx(0): #0: hsize: 640 vsize 480 refresh: 75 vid: 20273
    [ 2633.035] (II) fglrx(0): #1: hsize: 800 vsize 600 refresh: 75 vid: 20293
    [ 2633.035] (II) fglrx(0): #2: hsize: 1024 vsize 768 refresh: 75 vid: 20321
    [ 2633.035] (II) fglrx(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 2633.035] (II) fglrx(0): Supported detailed timing:
    [ 2633.035] (II) fglrx(0): clock: 108.0 MHz Image Size: 376 x 301 mm
    [ 2633.035] (II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
    [ 2633.035] (II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
    [ 2633.035] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz
    [ 2633.035] (II) fglrx(0): Monitor name: L1918S
    [ 2633.035] (II) fglrx(0): Monitor name:
    [ 2633.035] (II) fglrx(0): EDID (in hex):
    [ 2633.035] (II) fglrx(0): 00ffffffffffff001e6d314bfd300100
    [ 2633.035] (II) fglrx(0): 071101036e261e78eaa2a5a3574c9d25
    [ 2633.035] (II) fglrx(0): 115054bfef80314f454f614f81800101
    [ 2633.035] (II) fglrx(0): 010101010101302a009851002a403070
    [ 2633.035] (II) fglrx(0): 1300782d1100001e000000fd00384b1e
    [ 2633.035] (II) fglrx(0): 530e000a202020202020000000fc004c
    [ 2633.035] (II) fglrx(0): 31393138530a202020202020000000fc
    [ 2633.035] (II) fglrx(0): 00200a202020202020202020202000e7
    [ 2633.035] (II) fglrx(0): End of Display0 EDID data --------------------
    [ 2633.035] (II) fglrx(0): Dynamic Surface Resizing Enabled
    [ 2633.036] (II) fglrx(0): EDID for output DFP1
    [ 2633.036] (II) fglrx(0): EDID for output DFP2
    [ 2633.036] (II) fglrx(0): EDID for output DFP3
    [ 2633.036] (II) fglrx(0): EDID for output DFP4
    [ 2633.036] (II) fglrx(0): EDID for output DFP5
    [ 2633.036] (II) fglrx(0): EDID for output DFP6
    [ 2633.036] (II) fglrx(0): EDID for output DFP7
    [ 2633.036] (II) fglrx(0): EDID for output CRT1
    [ 2633.036] (II) fglrx(0): Manufacturer: GSM Model: 4b31 Serial#: 78077
    [ 2633.036] (II) fglrx(0): Year: 2007 Week: 7
    [ 2633.036] (II) fglrx(0): EDID Version: 1.3
    [ 2633.036] (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
    [ 2633.036] (II) fglrx(0): Sync: Separate Composite SyncOnGreen
    [ 2633.036] (II) fglrx(0): Max Image Size [cm]: horiz.: 38 vert.: 30
    [ 2633.036] (II) fglrx(0): Gamma: 2.20
    [ 2633.036] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
    [ 2633.036] (II) fglrx(0): First detailed timing is preferred mode
    [ 2633.036] (II) fglrx(0): redX: 0.639 redY: 0.342 greenX: 0.297 greenY: 0.615
    [ 2633.036] (II) fglrx(0): blueX: 0.146 blueY: 0.068 whiteX: 0.313 whiteY: 0.329
    [ 2633.036] (II) fglrx(0): Supported established timings:
    [ 2633.036] (II) fglrx(0): 720x400@70Hz
    [ 2633.036] (II) fglrx(0): 640x480@60Hz
    [ 2633.036] (II) fglrx(0): 640x480@67Hz
    [ 2633.036] (II) fglrx(0): 640x480@72Hz
    [ 2633.036] (II) fglrx(0): 640x480@75Hz
    [ 2633.036] (II) fglrx(0): 800x600@56Hz
    [ 2633.036] (II) fglrx(0): 800x600@60Hz
    [ 2633.036] (II) fglrx(0): 800x600@72Hz
    [ 2633.036] (II) fglrx(0): 800x600@75Hz
    [ 2633.036] (II) fglrx(0): 832x624@75Hz
    [ 2633.037] (II) fglrx(0): 1024x768@60Hz
    [ 2633.037] (II) fglrx(0): 1024x768@70Hz
    [ 2633.037] (II) fglrx(0): 1024x768@75Hz
    [ 2633.037] (II) fglrx(0): 1280x1024@75Hz
    [ 2633.037] (II) fglrx(0): 1152x864@75Hz
    [ 2633.037] (II) fglrx(0): Manufacturer's mask: 0
    [ 2633.037] (II) fglrx(0): Supported standard timings:
    [ 2633.037] (II) fglrx(0): #0: hsize: 640 vsize 480 refresh: 75 vid: 20273
    [ 2633.037] (II) fglrx(0): #1: hsize: 800 vsize 600 refresh: 75 vid: 20293
    [ 2633.037] (II) fglrx(0): #2: hsize: 1024 vsize 768 refresh: 75 vid: 20321
    [ 2633.037] (II) fglrx(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 2633.037] (II) fglrx(0): Supported detailed timing:
    [ 2633.037] (II) fglrx(0): clock: 108.0 MHz Image Size: 376 x 301 mm
    [ 2633.037] (II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
    [ 2633.037] (II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
    [ 2633.037] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz
    [ 2633.037] (II) fglrx(0): Monitor name: L1918S
    [ 2633.037] (II) fglrx(0): Monitor name:
    [ 2633.037] (II) fglrx(0): EDID (in hex):
    [ 2633.037] (II) fglrx(0): 00ffffffffffff001e6d314bfd300100
    [ 2633.037] (II) fglrx(0): 071101036e261e78eaa2a5a3574c9d25
    [ 2633.037] (II) fglrx(0): 115054bfef80314f454f614f81800101
    [ 2633.037] (II) fglrx(0): 010101010101302a009851002a403070
    [ 2633.037] (II) fglrx(0): 1300782d1100001e000000fd00384b1e
    [ 2633.037] (II) fglrx(0): 530e000a202020202020000000fc004c
    [ 2633.037] (II) fglrx(0): 31393138530a202020202020000000fc
    [ 2633.037] (II) fglrx(0): 00200a202020202020202020202000e7
    [ 2633.037] (II) fglrx(0): Printing probed modes for output CRT1
    [ 2633.037] (II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
    [ 2633.037] (II) fglrx(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "1280x960"x75.0 135.00 1280 1296 1440 1688 960 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1328 1440 1688 960 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "1280x768"x75.0 135.00 1280 1296 1440 1688 768 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "1280x768"x60.0 108.00 1280 1328 1440 1688 768 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "1280x720"x75.0 135.00 1280 1296 1440 1688 720 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "1280x720"x60.0 108.00 1280 1328 1440 1688 720 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "1024x768"x70.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "800x600"x72.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "640x480"x72.0 31.50 640 656 696 832 480 481 484 520 -hsync -vsync (37.9 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "640x480"x67.0 27.28 640 664 728 816 480 481 484 499 -hsync +vsync (33.4 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 2633.037] (II) fglrx(0): Output DFP1 disconnected
    [ 2633.037] (II) fglrx(0): Output DFP2 disconnected
    [ 2633.037] (II) fglrx(0): Output DFP3 disconnected
    [ 2633.037] (II) fglrx(0): Output DFP4 disconnected
    [ 2633.037] (II) fglrx(0): Output DFP5 disconnected
    [ 2633.038] (II) fglrx(0): Output DFP6 disconnected
    [ 2633.038] (II) fglrx(0): Output DFP7 disconnected
    [ 2633.038] (II) fglrx(0): Output CRT1 connected
    [ 2633.038] (II) fglrx(0): Using exact sizes for initial modes
    [ 2633.038] (II) fglrx(0): Output CRT1 using initial mode 1280x1024
    [ 2633.038] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 2633.038] (II) fglrx(0): DPI set to (96, 96)
    [ 2633.038] (II) fglrx(0): Eyefinity capable adapter detected.
    [ 2633.038] (II) fglrx(0): Adapter AMD Radeon HD 7700 Series has 6 configurable heads and 1 displays connected.
    [ 2633.038] (==) fglrx(0): PseudoColor visuals disabled
    [ 2633.038] (II) Loading sub module "ramdac"
    [ 2633.038] (II) LoadModule: "ramdac"
    [ 2633.038] (II) Module "ramdac" already built-in
    [ 2633.038] (==) fglrx(0): NoDRI = NO
    [ 2633.038] (==) fglrx(0): Capabilities: 0x00000000
    [ 2633.038] (==) fglrx(0): CapabilitiesEx: 0x00000000
    [ 2633.038] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
    [ 2633.038] (==) fglrx(0): UseFastTLS=0
    [ 2633.038] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
    [ 2633.038] (--) Depth 24 pixmap format is 32 bpp
    [ 2633.038] Loading extension ATIFGLRXDRI
    [ 2633.038] (II) fglrx(0): doing swlDriScreenInit
    [ 2633.038] (II) fglrx(0): swlDriScreenInit for fglrx driver
    [ 2633.039] ukiDynamicMajor: found major device number 250
    [ 2633.039] ukiDynamicMajor: found major device number 250
    [ 2633.039] ukiDynamicMajor: found major device number 250
    [ 2633.039] ukiOpenByBusid: Searching for BusID PCI:2:0:0
    [ 2633.039] ukiOpenDevice: node name is /dev/ati/card0
    [ 2633.039] ukiOpenDevice: open result is 14, (OK)
    [ 2633.039] ukiOpenByBusid: ukiOpenMinor returns 14
    [ 2633.039] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
    [ 2633.039] (II) fglrx(0): [uki] DRM interface version 1.0
    [ 2633.039] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:2:0:0"
    [ 2633.039] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x3c000
    [ 2633.039] (II) fglrx(0): [uki] mapped SAREA 0x3c000 to 0x7f000fd0d000
    [ 2633.039] (II) fglrx(0): [uki] framebuffer handle = 0x3d000
    [ 2633.039] (II) fglrx(0): [uki] added 1 reserved context for kernel
    [ 2633.039] (II) fglrx(0): swlDriScreenInit done
    [ 2633.039] (II) fglrx(0): Kernel Module Version Information:
    [ 2633.039] (II) fglrx(0): Name: fglrx
    [ 2633.039] (II) fglrx(0): Version: 14.10.2
    [ 2633.039] (II) fglrx(0): Date: Apr 17 2014
    [ 2633.039] (II) fglrx(0): Desc: AMD FireGL DRM kernel module
    [ 2633.039] (II) fglrx(0): Kernel Module version matches driver.
    [ 2633.039] (II) fglrx(0): Kernel Module Build Time Information:
    [ 2633.039] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.10.40-1-lts
    [ 2633.039] (II) fglrx(0): Build-Kernel MODVERSIONS: yes
    [ 2633.039] (II) fglrx(0): Build-Kernel __SMP__: yes
    [ 2633.039] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
    [ 2633.039] (II) fglrx(0): [uki] register handle = 0x0003e000
    [ 2633.040] (II) fglrx(0): DRI initialization successfull
    [ 2633.040] (II) fglrx(0): FBADPhys: 0xf400000000 FBMappedSize: 0x01040000
    [ 2633.041] (==) fglrx(0): Backing store disabled
    [ 2633.041] Loading extension FGLRXEXTENSION
    [ 2633.041] (**) fglrx(0): DPMS enabled
    [ 2633.041] (II) fglrx(0): Initialized in-driver Xinerama extension
    [ 2633.041] (**) fglrx(0): Textured Video is enabled.
    [ 2633.041] (II) LoadModule: "glesx"
    [ 2633.042] (II) Loading /usr/lib/xorg/modules/glesx.so
    [ 2633.043] (II) Module glesx: vendor="X.Org Foundation"
    [ 2633.043] compiled for 1.4.99.906, module version = 1.0.0
    [ 2633.043] Loading extension GLESX
    [ 2633.043] (II) fglrx(0): GLESX enableFlags = 8784
    [ 2633.043] (II) fglrx(0): GLESX is enabled
    [ 2633.043] (II) LoadModule: "amdxmm"
    [ 2633.043] (II) Loading /usr/lib/xorg/modules/amdxmm.so
    [ 2633.043] (II) Module amdxmm: vendor="X.Org Foundation"
    [ 2633.043] compiled for 1.4.99.906, module version = 2.0.0
    [ 2633.055] Loading extension AMDXVOPL
    [ 2633.055] Loading extension AMDXVBA
    [ 2633.055] (II) fglrx(0): Enable composite support successfully
    [ 2633.055] (WW) fglrx(0): Option "VendorName" is not used
    [ 2633.055] (WW) fglrx(0): Option "ModelName" is not used
    [ 2633.055] (II) fglrx(0): X context handle = 0x1
    [ 2633.055] (II) fglrx(0): [DRI] installation complete
    [ 2633.055] (==) fglrx(0): Silken mouse enabled
    [ 2633.056] (==) fglrx(0): Using HW cursor of display infrastructure!
    [ 2633.056] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 2633.414] (--) RandR disabled
    [ 2633.432] ukiDynamicMajor: found major device number 250
    [ 2633.432] ukiDynamicMajor: found major device number 250
    [ 2633.432] ukiOpenByBusid: Searching for BusID PCI:2:0:0
    [ 2633.432] ukiOpenDevice: node name is /dev/ati/card0
    [ 2633.432] ukiOpenDevice: open result is 15, (OK)
    [ 2633.432] ukiOpenByBusid: ukiOpenMinor returns 15
    [ 2633.432] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
    [ 2633.432] (EE) AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory]
    [ 2633.443] ukiDynamicMajor: found major device number 250
    [ 2633.443] ukiDynamicMajor: found major device number 250
    [ 2633.443] ukiDynamicMajor: found major device number 250
    [ 2633.443] ukiOpenDevice: node name is /dev/ati/card0
    [ 2633.443] ukiOpenDevice: open result is 16, (OK)
    [ 2633.443] ukiGetBusid returned 'PCI:2:0:0'
    [ 2633.443] ukiOpenDevice: node name is /dev/ati/card1
    [ 2633.443] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.443] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.443] ukiOpenDevice: Open failed
    [ 2633.443] ukiOpenDevice: node name is /dev/ati/card2
    [ 2633.443] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.443] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.443] ukiOpenDevice: Open failed
    [ 2633.443] ukiOpenDevice: node name is /dev/ati/card3
    [ 2633.444] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.444] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.444] ukiOpenDevice: Open failed
    [ 2633.444] ukiOpenDevice: node name is /dev/ati/card4
    [ 2633.444] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.444] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.444] ukiOpenDevice: Open failed
    [ 2633.444] ukiOpenDevice: node name is /dev/ati/card5
    [ 2633.444] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.444] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.444] ukiOpenDevice: Open failed
    [ 2633.444] ukiOpenDevice: node name is /dev/ati/card6
    [ 2633.444] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.444] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.444] ukiOpenDevice: Open failed
    [ 2633.444] ukiOpenDevice: node name is /dev/ati/card7
    [ 2633.444] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.444] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.444] ukiOpenDevice: Open failed
    [ 2633.444] ukiOpenDevice: node name is /dev/ati/card8
    [ 2633.444] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.445] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.445] ukiOpenDevice: Open failed
    [ 2633.445] ukiOpenDevice: node name is /dev/ati/card9
    [ 2633.445] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.445] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.445] ukiOpenDevice: Open failed
    [ 2633.445] ukiOpenDevice: node name is /dev/ati/card10
    [ 2633.445] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.445] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.445] ukiOpenDevice: Open failed
    [ 2633.445] ukiOpenDevice: node name is /dev/ati/card11
    [ 2633.445] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.445] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.445] ukiOpenDevice: Open failed
    [ 2633.445] ukiOpenDevice: node name is /dev/ati/card12
    [ 2633.445] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.445] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.445] ukiOpenDevice: Open failed
    [ 2633.445] ukiOpenDevice: node name is /dev/ati/card13
    [ 2633.445] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.445] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.446] ukiOpenDevice: Open failed
    [ 2633.446] ukiOpenDevice: node name is /dev/ati/card14
    [ 2633.446] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.446] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.446] ukiOpenDevice: Open failed
    [ 2633.446] ukiOpenDevice: node name is /dev/ati/card15
    [ 2633.446] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.446] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.446] ukiOpenDevice: Open failed
    [ 2633.446] ukiDynamicMajor: found major device number 250
    [ 2633.446] ukiOpenByBusid: Searching for BusID PCI:2:0:0
    [ 2633.446] ukiOpenDevice: node name is /dev/ati/card0
    [ 2633.446] ukiOpenDevice: open result is 16, (OK)
    [ 2633.446] ukiOpenByBusid: ukiOpenMinor returns 16
    [ 2633.446] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
    [ 2633.525] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
    [ 2633.526] ukiDynamicMajor: found major device number 250
    [ 2633.526] ukiDynamicMajor: found major device number 250
    [ 2633.526] ukiDynamicMajor: found major device number 250
    [ 2633.526] ukiOpenDevice: node name is /dev/ati/card0
    [ 2633.526] ukiOpenDevice: open result is 17, (OK)
    [ 2633.526] ukiGetBusid returned 'PCI:2:0:0'
    [ 2633.526] ukiOpenDevice: node name is /dev/ati/card1
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: Open failed
    [ 2633.526] ukiOpenDevice: node name is /dev/ati/card2
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: Open failed
    [ 2633.526] ukiOpenDevice: node name is /dev/ati/card3
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: Open failed
    [ 2633.526] ukiOpenDevice: node name is /dev/ati/card4
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: Open failed
    [ 2633.526] ukiOpenDevice: node name is /dev/ati/card5
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: Open failed
    [ 2633.526] ukiOpenDevice: node name is /dev/ati/card6
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: Open failed
    [ 2633.526] ukiOpenDevice: node name is /dev/ati/card7
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: Open failed
    [ 2633.526] ukiOpenDevice: node name is /dev/ati/card8
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: Open failed
    [ 2633.526] ukiOpenDevice: node name is /dev/ati/card9
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.527] ukiOpenDevice: Open failed
    [ 2633.527] ukiOpenDevice: node name is /dev/ati/card10
    [ 2633.527] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.527] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.527] ukiOpenDevice: Open failed
    [ 2633.527] ukiOpenDevice: node name is /dev/ati/card11
    [ 2633.527] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.527] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.527] ukiOpenDevice: Open failed
    [ 2633.527] ukiOpenDevice: node name is /dev/ati/card12
    [ 2633.527] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.527] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.527] ukiOpenDevice: Open failed
    [ 2633.527] ukiOpenDevice: node name is /dev/ati/card13
    [ 2633.527] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.527] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.527] ukiOpenDevice: Open failed
    [ 2633.527] ukiOpenDevice: node name is /dev/ati/card14
    [ 2633.527] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.527] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.527] ukiOpenDevice: Open failed
    [ 2633.527] ukiOpenDevice: node name is /dev/ati/card15
    [ 2633.527] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.527] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.527] ukiOpenDevice: Open failed
    [ 2633.527] ukiDynamicMajor: found major device number 250
    [ 2633.527] ukiOpenByBusid: Searching for BusID PCI:2:0:0
    [ 2633.527] ukiOpenDevice: node name is /dev/ati/card0
    [ 2633.527] ukiOpenDevice: open result is 17, (OK)
    [ 2633.527] ukiOpenByBusid: ukiOpenMinor returns 17
    [ 2633.527] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
    [ 2633.546] (II) fglrx(0): OverDrive6 Detected!
    [ 2633.551] (II) fglrx(0): Setting screen physical size to 338 x 270
    [ 2633.594] (II) config/udev: Adding input device Power Button (/dev/input/event3)
    [ 2633.594] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 2633.594] (II) LoadModule: "evdev"
    [ 2633.595] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 2633.595] (II) Module evdev: vendor="X.Org Foundation"
    [ 2633.595] compiled for 1.14.3, module version = 2.8.2
    [ 2633.595] Module class: X.Org XInput Driver
    [ 2633.595] ABI class: X.Org XInput driver, version 19.1
    [ 2633.595] (II) Using input driver 'evdev' for 'Power Button'
    [ 2633.595] (**) Power Button: always reports core events
    [ 2633.595] (**) evdev: Power Button: Device: "/dev/input/event3"
    [ 2633.595] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 2633.595] (--) evdev: Power Button: Found keys
    [ 2633.595] (II) evdev: Power Button: Configuring as keyboard
    [ 2633.595] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
    [ 2633.595] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 2633.595] (**) Option "xkb_rules" "evdev"
    [ 2633.595] (**) Option "xkb_model" "pc104"
    [ 2633.595] (**) Option "xkb_layout" "us"
    [ 2633.634] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 2633.634] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 2633.634] (II) Using input driver 'evdev' for 'Power Button'
    [ 2633.634] (**) Power Button: always reports core events
    [ 2633.634] (**) evdev: Power Button: Device: "/dev/input/event2"
    [ 2633.634] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 2633.634] (--) evdev: Power Button: Found keys
    [ 2633.634] (II) evdev: Power Button: Configuring as keyboard
    [ 2633.634] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
    [ 2633.634] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [ 2633.634] (**) Option "xkb_rules" "evdev"
    [ 2633.634] (**) Option "xkb_model" "pc104"
    [ 2633.634] (**) Option "xkb_layout" "us"
    [ 2633.635] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event1)
    [ 2633.635] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
    [ 2633.635] (II) Using input driver 'evdev' for 'Logitech USB-PS/2 Optical Mouse'
    [ 2633.635] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
    [ 2633.635] (**) evdev: Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event1"
    [ 2633.635] (--) evdev: Logitech USB-PS/2 Optical Mouse: Vendor 0x46d Product 0xc051
    [ 2633.635] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
    [ 2633.635] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
    [ 2633.635] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found relative axes
    [ 2633.635] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
    [ 2633.635] (II) evdev: Logitech USB-PS/2 Optical Mouse: Configuring as mouse
    [ 2633.635] (II) evdev: Logitech USB-PS/2 Optical Mouse: Adding scrollwheel support
    [ 2633.635] (**) evdev: Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
    [ 2633.635] (**) evdev: Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 2633.635] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input1/event1"
    [ 2633.635] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE, id 8)
    [ 2633.635] (II) evdev: Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
    [ 2633.635] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
    [ 2633.635] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
    [ 2633.635] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
    [ 2633.635] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
    [ 2633.635] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
    [ 2633.635] (II) No input driver specified, ignoring this device.
    [ 2633.636] (II) This device may have been added with another device file.
    [ 2633.636] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
    [ 2633.636] (II) No input driver specified, ignoring this device.
    [ 2633.636] (II) This device may have been added with another device file.
    [ 2633.636] (II) config/udev: Adding input device HDA NVidia Line Out (/dev/input/event6)
    [ 2633.636] (II) No input driver specified, ignoring this device.
    [ 2633.636] (II) This device may have been added with another device file.
    [ 2633.636] (II) config/udev: Adding input device HDA NVidia Line (/dev/input/event7)
    [ 2633.636] (II) No input driver specified, ignoring this device.
    [ 2633.636] (II) This device may have been added with another device file.
    [ 2633.637] (II) config/udev: Adding input device HDA NVidia Rear Mic (/dev/input/event8)
    [ 2633.637] (II) No input driver specified, ignoring this device.
    [ 2633.637] (II) This device may have been added with another device file.
    [ 2633.637] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=10 (/dev/input/event10)
    [ 2633.637] (II) No input driver specified, ignoring this device.
    [ 2633.637] (II) This device may have been added with another device file.
    [ 2633.637] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=9 (/dev/input/event11)
    [ 2633.637] (II) No input driver specified, ignoring this device.
    [ 2633.637] (II) This device may have been added with another device file.
    [ 2633.638] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=8 (/dev/input/event12)
    [ 2633.638] (II) No input driver specified, ignoring this device.
    [ 2633.638] (II) This device may have been added with another device file.
    [ 2633.638] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=7 (/dev/input/event13)
    [ 2633.638] (II) No input driver specified, ignoring this device.
    [ 2633.638] (II) This device may have been added with another device file.
    [ 2633.638] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event14)
    [ 2633.638] (II) No input driver specified, ignoring this device.
    [ 2633.638] (II) This device may have been added with another device file.
    [ 2633.638] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=11 (/dev/input/event9)
    [ 2633.639] (II) No input driver specified, ignoring this device.
    [ 2633.639] (II) This device may have been added with another device file.
    [ 2633.639] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 2633.639] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 2633.639] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 2633.639] (**) AT Translated Set 2 keyboard: always reports core events
    [ 2633.639] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 2633.639] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 2633.639] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 2633.639] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 2633.639] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 2633.639] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
    [ 2633.639] (**) Option "xkb_rules" "evdev"
    [ 2633.639] (**) Option "xkb_model" "pc104"
    [ 2633.639] (**) Option "xkb_layout" "us"
    [ 2633.640] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
    [ 2633.640] (II) No input driver specified, ignoring this device.
    [ 2633.640] (II) This device may have been added with another device file.
    [ 2635.885] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
    [ 2639.300] (II) AIGLX: Suspending AIGLX clients for VT switch
    [ 2639.300] (II) fglrx(0): Backup framebuffer data.
    [ 2639.333] (II) fglrx(0): Backup complete.
    [ 2653.729] (II) evdev: AT Translated Set 2 keyboard: Close
    [ 2653.730] (II) UnloadModule: "evdev"
    [ 2653.730] (II) evdev: Logitech USB-PS/2 Optical Mouse: Close
    [ 2653.730] (II) UnloadModule: "evdev"
    [ 2653.730] (II) evdev: Power Button: Close
    [ 2653.730] (II) UnloadModule: "evdev"
    [ 2653.730] (II) evdev: Power Button: Close
    [ 2653.730] (II) UnloadModule: "evdev"
    [ 2653.732] (II) fglrx(0): Shutdown CMMQS
    [ 2653.735] (II) fglrx(0): [uki] removed 1 reserved context for kernel
    [ 2653.735] (II) fglrx(0): [uki] unmapping 8192 bytes of SAREA 0x3c000 at 0x7f000fd0d000
    [ 2653.735] (EE)
    [ 2653.740] (EE) Backtrace:
    [ 2653.745] (EE) 0: Xorg (xorg_backtrace+0x3d) [0x57e04d]
    [ 2653.750] (EE) 1: Xorg (0x400000+0x181da9) [0x581da9]
    [ 2653.754] (EE) 2: /usr/lib/libpthread.so.0 (0x7f000f1e8000+0xf4b0) [0x7f000f1f74b0]
    [ 2653.759] (EE) 3: /usr/lib/libpciaccess.so.0 (0x7f000f406000+0x503e) [0x7f000f40b03e]
    [ 2653.765] (EE) 4: /usr/lib/xorg/modules/drivers/fglrx_drv.so (amd_xs113_int10_x_inb+0x46) [0x7f000bb46126]
    [ 2653.771] (EE) 5: /usr/lib/xorg/modules/drivers/fglrx_drv.so (0x7f000b15c000+0x9e2e05) [0x7f000bb3ee05]
    [ 2653.776] (EE) 6: /usr/lib/xorg/modules/drivers/fglrx_drv.so (X86EMU_exec+0xa5) [0x7f000bb32555]
    [ 2653.782] (EE) 7: /usr/lib/xorg/modules/drivers/fglrx_drv.so (amd_xs113_int10_xf86ExecX86int10+0x46) [0x7f000bb47286]
    [ 2653.788] (EE) 8: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xf86ExecX86int10+0xd) [0x7f000b56897d]
    [ 2653.793] (EE) 9: /usr/lib/xorg/modules/libvbe.so (VBESetVBEMode+0x9d) [0x7f000ab0163d]
    [ 2653.799] (EE) 10: /usr/lib/xorg/modules/drivers/fglrx_drv.so (0x7f000b15c000+0x441623) [0x7f000b59d623]
    [ 2653.805] (EE) 11: /usr/lib/xorg/modules/drivers/fglrx_drv.so (atiddxVBESetConsoleMode+0x44) [0x7f000b59d474]
    [ 2653.811] (EE) 12: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xdl_xs114_atiddxFreeScreen+0x73e) [0x7f000b6ffc1e]
    [ 2653.817] (EE) 13: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xdl_xs114_atiddxCloseScreen+0x321) [0x7f000b6ff241]
    [ 2653.823] (EE) 14: /usr/lib/xorg/modules/drivers/fglrx_drv.so (0x7f000b15c000+0xa4a846) [0x7f000bba6846]
    [ 2653.828] (EE) 15: Xorg (0x400000+0xc3136) [0x4c3136]
    [ 2653.833] (EE) 16: Xorg (0x400000+0x106964) [0x506964]
    [ 2653.838] (EE) 17: Xorg (0x400000+0x24cd7) [0x424cd7]
    [ 2653.843] (EE) 18: /usr/lib/libc.so.6 (__libc_start_main+0xf0) [0x7f000e058000]
    [ 2653.848] (EE) 19: Xorg (0x400000+0x24f0f) [0x424f0f]
    [ 2653.857] (EE)
    [ 2653.861] (EE) Segmentation fault at address 0x0
    [ 2653.866] (EE)
    Fatal server error:
    [ 2653.874] (EE) Caught signal 11 (Segmentation fault). Server aborting
    [ 2653.878] (EE)
    [ 2653.883] (EE)
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    [ 2653.899] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [ 2653.904] (EE)
    [ 2653.908] (EE) Server terminated with error (1). Closing log file.
    xorg.conf
    Section "ServerLayout"
    Identifier "aticonfig Layout"
    Screen 0 "aticonfig-Screen[0]-0" 0 0
    EndSection
    Section "Module"
    EndSection
    Section "Monitor"
    Identifier "aticonfig-Monitor[0]-0"
    Option "VendorName" "ATI Proprietary Driver"
    Option "ModelName" "Generic Autodetecting Monitor"
    Option "DPMS" "true"
    EndSection
    Section "Device"
    Identifier "aticonfig-Device[0]-0"
    Driver "fglrx"
    BusID "PCI:2:0:0"
    EndSection
    Section "Screen"
    Identifier "aticonfig-Screen[0]-0"
    Device "aticonfig-Device[0]-0"
    Monitor "aticonfig-Monitor[0]-0"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    I'm sure that the main problem is between keyboard and chair, but I'd like to know, what's wrong with pc
    Thanks for your efforts.
    Last edited by Mytrin (2014-05-25 19:09:02)

    I've managed to solve this error:
    (EE) AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory
    There was missing library and few directories, which I found according to this http://www.reddit.com/r/archlinux/comme … _correctly at /usr/lib/dri, so I had to just symlink it. However, "unable to open display" error is still annoying me and Xorg is not working.
    EDIT: Found EE about missing commands in new Xorg.0.log and installed xterm to solve this. Now I don't have entirely black screen after startx. There is white rectangular terminal and fglrxinfo seems to be all right as it detected my Radeon and OpenGL. Now I have to install some DE, but that's another story. Marking as [SOLVED] and once again thanks to clfarron4 for reply.
    Last edited by Mytrin (2014-05-25 19:06:09)

  • Unable to open Messaging Server 6.2 through admin console 5.2

    my system is
    Sun Java(tm) System Messaging Server 6.2-3.05 (built Nov 23 2005)
    libimta.dll 6.2-3.05 (built 02:22:19, Nov 23 2005)
    Microsoft Windows 2000 version 5.2 (Build 3790)
    i installed Sun Java Enterprise System (directory, admin, messaging) servers on my windows 2003 server, all is working fine except:
    1- unable to open my messaging server through my admin console 5.2.
    when checking the error log file i see
    "[05/Jun/2006:10:51:49] failure ( 2624): for host t.est.hotmail.com trying to GET /msg-config/tasks/operation/cgi_root, cgi_scan_headers reports: the CGI program E:\Sun\Server-Root\bin\msg\admin\bin\cgi_root.exe did not produce a valid header (program terminated without a valid CGI header. Check for core dump or other abnormal termination)"
    Any clue?
    2- When creating a new user through the admin console 5.2, and check the mail account checkbox, i don't get the "mail tab" to complete the needed information, and therefore the newly created user is not an active email account as mainly the mailhost attribute has not been created for the account
    Is this related to the problem in point 1?
    NOTE 1: i ran cmm_dssetup.pl before configuring the messaging server and selected schema 1
    NOTE 2: i downloaded the software from sun.com, didn't register it yet as i'm in the testing phase
    Appreciate your help, direction and tips

    Oh, my.....
    1. The Directory Console is not very useful, for anything in Messaging 6. The MTA is configured via editing files, and the mail store is better configured using the configutil utility.
    2. You SHOULD NOT attempt to create users with the Directory Console. They won't work. Use either the command-line tools provided (comm-admin), or use the Delegated Admin tool provided.

  • I am unable to open encrypted emails using webmail and a CAC reader.  It says "content can't be displayed because the S/MIME control isn't available."  I'm using a Macbook Pro with 10.10 OS and have tried both Safari and Chrome.

    I am using a Macbook Pro with OS X Yosemite 10.10.2.  I am unable to open encrypted emails using webmail.  I have verified my certificates are loaded in the keychain for my military common access card while using a CAC reader.  When I try to view the message it gives me the error saying "content can't be displayed because the S/MIME control isn't available." 

    I am using a Macbook Pro with OS X Yosemite 10.10.2.  I am unable to open encrypted emails using webmail.  I have verified my certificates are loaded in the keychain for my military common access card while using a CAC reader.  When I try to view the message it gives me the error saying "content can't be displayed because the S/MIME control isn't available." 

  • Unable to open the PM order in change and display mode

    Dear All,
    Am facing some issue that am unable to open the Maintenance Order in Change and Display mode.
    Can you provide the solution.

    Hi Thirupathi,
    Can you send us a screenshot or the error message information ?
    If it is due to status missing (SAP note available for the same)
    Regards
    Terence

  • Exchange Server 2010 Move mailbox to database but display MapiExceptionNoAccess: Unable to open message store. (hr=0x80070005, ec=-2147024891)

    I have 2 exchange server "A" and "B". Server "A" have "Test1" database and Server "B" have "Test2" database. I tried move some mailboxes from "Test1" to "Test2"
    but sometimes mailboxes cannot finished and display below error.  I used Domain administrator to move mailboxes and grant "Manage full access permission" to these mailboxes but still failed. Finally, I clear the failed move request
    and repeat the move mailboxes action several times.  Then, the move request completed without error. Have any suggestion? Please help. Thank you!
    Mailbox move for 'xxx.com/xxx/xxx/xxx - Users/xxx/Peter' (331d5b4e-0bd1-428a-ae28-d97581ae0d7f) has failed.
    Error code: -2147024891
    MapiExceptionNoAccess: Unable to open message store. (hr=0x80070005, ec=-2147024891)
    Diagnostic context:
        Lid: 18969   EcDoRpcExt2 called [length=132]
        Lid: 27161   EcDoRpcExt2 returned [ec=0x80070005][length=202][latency=0]
        Lid: 32881   StoreEc: 0x80070005
        Lid: 50035 
        Lid: 64625   StoreEc: 0x80070005
        Lid: 1494    ---- Remote Context Beg ----
        Lid: 26426   ROP: ropLogon [254]
        Lid: 56503 
        Lid: 12716   StoreEc: 0x80070005
        Lid: 20794 
        Lid: 28474   StoreEc: 0x80070005
        Lid: 22330   dwParam: 0x0        Msg: 14.03.0123.002:NHK-S08-MBD02
        Lid: 1750    ---- Remote Context End ----
        Lid: 23354   StoreEc: 0x80070005
        Lid: 25913 
        Lid: 21817   ROP Failure: 0x80070005
        Lid: 26297 
        Lid: 16585   StoreEc: 0x80070005
        Lid: 32441 
        Lid: 1706    StoreEc: 0x80070005
        Lid: 24761 
        Lid: 20665   StoreEc: 0x80070005
        Lid: 25785 
        Lid: 29881   StoreEc: 0x80070005
    Context:
    Mailbox: Primary (331d5b4e-0bd1-428a-ae28-d97581ae0d7f)

    Hi Gordon 
    This could happen if there is any mailbox which has occupied more space than its normal quota allocated.
    As suggested by geo try to clean all the DB's first 
    You can probably run Get-Mailboxdatabase | Clean-Mailboxdatabase which will clean all of your DB's wait for some time until it gets completed
    Also try running the command with the MRS server parameter switch and specify a CAS FQDN and see the results if it gets succeded
    Get-Mailbox -Database 'DBNAME'| New-MoveRequest -TargetDatabase DBNAME -BatchName "BATCHNAME" -BadItemLimit 100 -AcceptLargeDataLoss -MRSserver CAS server FQDN Good Luck !!Please mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you.
    Regards,
    Sathish

  • Unable to open b2b console after SOA 11.1.1.6 installation

    Hi Gurus,
    I had installed oracle SOA 11.1.1.6.0 successfully but i am unable to open b2b console after the installation.
    Now
    1)With Oracle installation can i able to open b2b console?
    2)If not,Should i install oracle b2b soft also?
    if yes,I can see the soft in 3 CDs (CD 1 of 1 ,CD 1 of 2 and CD 1 of 3)is it sufficient to install CD 1 of 1 so that others will also get install)
    after the installation can i able to open b2b console?
    please clarify?
    Regards
    Ramesh

    Hi Anju,
    Thanks for the help.
    Can you send me some blog to guide me step by step to build Oracle b2b SOA application.
    Please clarify:Do i need to install B2B document editor soft(CD 1of 1,CD 1 of 2,CD 1 of 3) or Installation of CD 1 of 1 is sufficient for b2b document editor.
    Is B2B server is different from SOA server?If at all i need to deploy some doc in server,Can i deploy in SOA server using document editor?
    Can i have some clarity on 1.How to install b2b doc in server?
    Can i have a step by step sample to run a simple b2b application?
    Regards
    Ramesh

  • I am unable to open another Firefox4 window when I have the Error Console open and I can't open the Error Console when I have two Firefox4 windows open. Is anyone else having this problem?

    I am trying to debug the jQuery to a micro site I've created and I am unable to open the Error Console when I have two Firefox windows open and I am unable to open a second Firefox window when I have the Error Console open.
    I am using Mac OS X 10.6.7 and I am using Firefox 4.0.1

    I personally haven't experienced much of the "reverberation/feedback" when using a headset on the i4S...
    Yes, I have near-perfect hearing too (for scope, squeaky brakes hurt my ears) I come from many conversations on many phones and types and first off, CDMA technology is great for coverage, terrible for voice quality. HD Voice in Europe made for some of the best phone conversations I've ever had.
    Back on track, feedback is most noticable (similar to the landline phone) when using the iPhone without a headset, but for me it's not an absolute criticality mainly because I use VoIP apps alot, so maybe it has desensitized me some over the past year.
    But whenever I'm on a call, and the other person has me on speakerphone, I have alot of trouble talking because of the feedback loop caused. So the less of my voice I hear the better I can talk.
    Have you tried a bluetooth headset yet?

  • Xhost:  unable to open display...

    Greetings. I'm having install issues, and google is leading me to believe its due to the DISPLAY variable. The problem is all commands related to xhost, export DISPLAY, etc. all generate the error:
    xhost: unable to open display "myIPAddress:0.0"
    Any ideas?
    Thanks in advance!!!
    Edited by: ChrisRDBA on Oct 25, 2009 3:16 PM

    DISPLAY=:0
    Way too easy.

  • Unable to open the xclock in RHEL even after setting the display

    Hi All,
    I''ve install the oracle on linux before that i need to se the diplay in order to launch OUI however I couldnt make it.
    and the showstopper is shown below.
    [root@Machine1 Desktop]# DISPLAY=192.168.0.129:1.0
    [root@Machine1 Desktop]# export DISPLAY
    [root@Machine1 Desktop]# xhost +
    xhost: unable to open display "192.168.0.129:1.0"
    [root@Machine1 Desktop]#
    Could any please help on this ASAP.

    Ramu Jagini wrote:
    Hi All,
    I''ve install the oracle on linux before that i need to se the diplay in order to launch OUI however I couldnt make it.
    and the showstopper is shown below.
    [root@Machine1 Desktop]# DISPLAY=192.168.0.129:1.0
    [root@Machine1 Desktop]# export DISPLAY
    [root@Machine1 Desktop]# xhost +
    xhost: unable to open display "192.168.0.129:1.0"
    [root@Machine1 Desktop]# LOL.
    First and foremost - get out of the habit of using root unless absolutely required. You will not be able to use root in the real world and using it now for this kind of activity will simply introduce wrong habits.
    Working as root most of the time ... Bad habit. Bad bad habit. Anyone teaching to log in and stay as root ... shame. In business, auditors will note the habit and user will be reprimanded, up to and including 'go find a new job - you are not the SysAdmin'.
    Secondly - you need to understand xhost, and indeed 'display ownership'. When you log in to the Desktop, your screen is 'owned' by a userid. You use xhost (unwisely most of the time) to give permission to others to display on your screen.
    Thirdly - you need to understand the influence of DISPLAY variable - it tells programs where they should display... on an authorized display ... such as the one authorized by xhost.
    Since you want to do it the wrong way, use the following sequence:
    1) Log all the way out of Linux and the desktop (all the way - ensures you don't have screwed up environment)
    2) Log in (whatever user you wish - even the bad habit, go stand in the corner, root user)
    3) Open a new terminal and give permission to the world to use your screen and get the IP address of the machine. Prior to this xhost command do NOT su (nor set DISPLAY); do not cross Go; do not collect $200
    4) Open a new session, preferrably on a different computer (but open new terminal and then 'su - (otheruser)' will do)
    5) Under that new user, tell it to display on the IP address and screen from step 3
    6) Run xclock
    But ... to install Oracle s/w, the 'right way' is to simply log all the way out and then log in to a new desktop as the non-root Oracle owner (on the machine; or using Xming or Xceed or ...; or using VNC client such as UltraVNC or TightVNC)
    Did you notice that logging in as root by habit is a bad idea?

  • Unable to open KVM's from UCS Console

    Unable to open KVM's from UCS KVM Console, Windows 2008 R2 with Java installed try in IE and Firefox, I am able see all KVM's but when I click on KVM it will ask for save or open, saving to disk and opening from disk, directly open not working. Any configuration for IE and Java

    Try to Attach the Screenshot here....

  • Unable to Open the Admin Console

    HI there,
    I installed Weblogic server 10.3.3 on my windows operating system. I confugred it through configuration wizard. After that I was able to open the admin console . I logged into admin console and logged out of it. Now , I am unable to open the admin console again . When ever I try to open it from the quick launch it gives a error meassage "firefox can't establish a connection to ....:pc-7001." (somethng like that).
    I tried to open it from start menu and then clich START ADMIN SERVER FOR WEBLOGIC DOMAIN .. when ever I click this it directs to a CMD prompt where in it gives a path like c;>/ oracle/middlware/userprojects/domains/basedomain/ follwoed by a curosr waiting for instruction..
    Please tell me wat is goin wrong..? U r help is greatly appreciated

    Hi,
    I have tried doing the steps you have mentioned above.It is redirecting to http 503 page.Upon checking the logs getting the following error.
    Could you please help with it.
    ##<Jun 14, 2011 12:14:32 PM IST> <Info> <WorkManager> <01hw198615> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1308033872956> <BEA-002901> <Creating WorkManager "consoleWorkManager" for module "null" and application "consoleapp">
    ####<Jun 14, 2011 12:14:34 PM IST> <Error> <HTTP> <01hw198615> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1308033874347> <BEA-101216> <Servlet: "AppManagerServlet" failed to preload on startup in Web application: "console".
    java.lang.NoSuchMethodError: com.bea.utils.misc.ProcessUtil.getPropValues(Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;)[Ljava/lang/String;
         at com.bea.p13n.license.LicenseHelper.getLicensePropertyValues(LicenseHelper.java:259)
         at com.bea.netuix.servlets.services.LightNetUIxServices.getRestrictedPortalLimit(LightNetUIxServices.java:140)
         at com.bea.netuix.servlets.manager.UIServlet.reinitInternal(UIServlet.java:177)
         at com.bea.netuix.servlets.manager.UIServlet.initInternal(UIServlet.java:164)
         at com.bea.netuix.servlets.manager.UIServlet.access$100(UIServlet.java:60)
         at com.bea.netuix.servlets.manager.UIServlet$ServletLifecycleListenerImpl.init(UIServlet.java:555)
         at com.bea.netuix.util.ServletLifecycleListener.initOrReinitInternal(ServletLifecycleListener.java:131)
         at com.bea.netuix.util.ServletLifecycleService.addServletLifecycleListener(ServletLifecycleService.java:252)
         at com.bea.netuix.util.ServletLifecycleService.addServletLifecycleListener(ServletLifecycleService.java:182)
         at com.bea.netuix.servlets.manager.UIServlet.init(UIServlet.java:131)
         at com.bea.netuix.servlets.manager.SingleFileServlet.init(SingleFileServlet.java:75)
         at javax.servlet.GenericServlet.init(GenericServlet.java:241)
         at com.bea.console.utils.MBeanUtilsInitSingleFileServlet.init(MBeanUtilsInitSingleFileServlet.java:36)
         at weblogic.servlet.AsyncInitServlet.initDelegate(AsyncInitServlet.java:100)
         at weblogic.servlet.AsyncInitServlet.init(AsyncInitServlet.java:78)
         at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
         at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58)
         at weblogic.servlet.internal.StubLifecycleHelper.<init>(StubLifecycleHelper.java:48)
         at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:539)
         at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1976)
         at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1950)
         at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1869)
         at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3126)
         at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1512)
         at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:486)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
         at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
         at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:1267)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
         at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:409)
         at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
         at weblogic.application.internal.BackgroundDeploymentService$2.next(BackgroundDeploymentService.java:373)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
         at weblogic.application.internal.BackgroundDeploymentService$BackgroundDeployAction.run(BackgroundDeploymentService.java:277)
         at weblogic.application.internal.BackgroundDeploymentService$OnDemandBackgroundDeployAction.run(BackgroundDeploymentService.java:336)
         at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    >

Maybe you are looking for

  • Problems trying to install iso 5.0.1 on my 3gs!

    Hi All Just attempted to install iso 5.01 on my 3gs but get a diolgue box saying iphone found but cannot continue until reset carried out! Tried all methods to do this but to no avail! Each time I try and restore via iTunes end up with the same messa

  • House Bank Key Issue

    Hi, In our company, there is a House Bank ABCD and House Bank Key XXXXXXXX for Plant 1. Account deptt. do bank reconciliation and no issue with that.. But suddenly last month, by mistake we create a House Bank key ZZZZZZZZ for Plant 2 and assign it t

  • URGENT!  Idoc Message Type FIDCC2 Not Posting CO Documents

    Hi Everyone, Our company is just about to begin using message type FIDCC2 to post entries through FB60/FB65 and FB50.  When you manually enter an entry through any of these transactions, an FI, CCA and PCA document are all created simultaneously.  Ho

  • Need help with Cluster of Buttons displaying a message to which button is being pressed.

    Create a VI with a cluster of six buttons labeled Option1-Option6. When executing, the VI should wait for the user to press one of the buttons. When a button is pressed, use the Display Message To User Express VI to indicate which option was selected

  • Migrate solaris 8 oracle applications to solaris 10 using oracle vm

    Hi, I have Oracle Applications 11.5.8 running on Solaris 8 on SPARC machine (the forms and concurrent servers) and Linux SLES9 for the Oracle 9i database server. I am exploring if it's possible to migrate the forms and concurrent tier from Solaris 8