Unable to open conversation

Hi.
A newbie here. I'm trying to figure out an issue with my BlackBerry Gmail inbox. Hopefully this is the right place to ask the question.
I started integrating my Gmail account around 2 or 3 weeks ago. The setup completed without any problems. I can open my emails without a hassle. The conversation feature works fine. There wasn't a single problem until I realized I can't open a conversation sent from one of my subscribed mailing list.
At first, I thought it was because the emails from the mailing list was not in my Inbox. I have it filtered so that it skipped Inbox and labeled "MyGroup". So I decided to edit the filter and have the emails also sent to my Inbox. The emails started showing up in my BlackBerry Gmail Inbox, but I still can't open any of the conversations sent from the mailing list.
I even tried creating a new Gmail account and have the mailing list emails sent to that new Gmail account. No filters, no nothing. The emails were sent directly to the Inbox in my new Gmail account. I integrate this new Gmail account into my BlackBerry. Unfortunately the issue remains. I still can't open the conversations.
Any clues on solving this issue?
Thanks in advance.

Finally had the time to do a self-reply.
Just in case you're wondering, this issue was resolved. Here's what I tried:
1. Remove and re-add my email account to my BB: failed.
2. Remove, hard reset, and re-add my email account to my BB: failed.
3. Perform a clean reset in my BB: feels like re-installing Windows; no way I'm doing this.
4. Use the Gmail application for BB: solved.
No more problems opening conversations from a mailing list when I'm using Gmail application.

Similar Messages

  • Unable to view more than one open conversation in Messages / iMessage

    After updating my OS to 10.9, my Messages (iMessages) fails to view multiple "open conversation". I can't seem to resize the window either. This is what it looks like:
    Does anyone else have the same issue? How can I solve this? Any help will be appreciated, thanks.

    Hi,
    As a first step use the Finder > Go Menu and hold the ALT key to see the Library and select it.
    Navigate to the Preferences folder.
    Find com.apple.ichat.plist and Drag it to the Trash.
    Restart Messages.
    This particular .plist holds the windowing info  and yours seems to have lost the fact it is supposed to have the List on the left and the other interface items across the top.
    Also try the Window Menu  > Messages (Or it's keystrokes)
    This is because you can create a natural single chat window by double clicking on the list on the left (one chat) an this will open a window like you posted.
    The Main window can then be closed.
    All new invites/chats are in the hidden main window.
    (The chat actually continues in both "windows" if you leave it open).
    10:40 pm      Friday; December 13, 2013
      iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • Unable to open document. Please check to see if you have read permission for the above file.

    System:
    Adobe Acrobat X Pro, 10.1.2
    Windows 7 Enterprise, 32-bit
    Quad Core badass CPU
    4GB RAM
    MS Word 2010 (Office 2010)
    I installed the latest version as Administrator and am running as Administrator. I have all rights to all files on the PC.
    When I attempt to create a PDF from any Word document, whether .DOC or .DOCX, I get an error window every time:
    "Unable to open document:"
    "[document location]"
    "Please check to see if you have read permission for the above file."
    This happens after the little notice pops up "Starting the application which created the document...."
    If I open Word and create PDF from the ribbon, it works. It still won't allow me to create from Acrobat.
    It creates PDFs from Excel files but not DOC files. I've searched for solutions but found none. I did find this from July of 2011:
    "I have found out from Adobe technical support that this is a known issue with Office 2010 SP1 installed. This is an FYI for anyone else experiencing this issue, remove SP1 and it will work ok. They said an update to correct this issue will be coming within the next quarter."
    I have updated to the latest version 10.1.2 and still have this problem.
    This is a major issue, because it also fails on batch conversions, which is what I really need for the 100 or so documents that need to be PDFed. I'm not going to open each individual file and save each one from within Word.
    This is a KNOWN ISSUE at Adobe, and if you look through the forums you'll find many people having this problem, and so far, I have not seen any solution.
    If anyone has found the solution, please post it here.
    Thanks!
    B

    I think I found a solution. It seems to be relatet to normal.dotm.
    In our environment we have upgraded from XP & Office 2003 to Win7 and Office 2010. Normal.dot is stored on the users home share. When Office 2010 is started for the first time (for a user) it takes some of the old stuff from normal.dot and puts it in the new normal.dotm. When this happens, we get this error in Acrobat X.
    The solution is to rename both normal.dot and notmal.dot to e.g. normal.dot.old and normal.dotm.old. Office/Word 2010 will then create a new, "clean" normal.dotm.
    (By the way, if you are in a corporate environment, you might have changed the default path to normal.dot in Office group policies. You can see it here: HKEY_CURRENT_USER\Software\Policies\Microsoft\office\14.0\common\general\usertemplates)
    I would be interested in knowing exactly why/what in normal.dotm caused this error. I can provide you (Adobe) with a faulty normal.dot(m), if you're interested.

  • Unable to Open unix file in UNICODE system which created NON-UNICODE system

    Unable to Open unix file in UNICODE system which created in NON-UNICODE system
    We have two SAP systems both are ECC6.0 but System 1 is NON-Unicode and System2 is Unicode system.
    There is a common unix directory/folder for both system.
    Our requirement is to create one file on unix common folder and write the data to file from system1 .
    In system2 open the same file for appending mode to write the data .
    The file in system 1 created with below sentence.
    OPEN DATASET g_unix_file FOR OUTPUT IN TEXT MODE ENCODING UTF-8.
    Now I have to append the data from system 2 to same file.
    I have tried to used below statement in system 2 to open the file but sy-subrc value comes as '8'.
    1> OPEN DATASET g_unix_file FOR APPENDING IN TEXT MODE ENCODING UTF-8.
    2>OPEN DATASET g_unix_file FOR APPENDING IN legacy TEXT MODE CODE PAGE
    cdp IGNORING CONVERSION ERRORS  .
    3>OPEN DATASET g_unix_file FOR APPENDING IN TEXT MODE ENCODING Default.
    4>OPEN DATASET g_unix_file FOR APPENDING IN TEXT MODE ENCODING NON-UNICODE.
    Tried out all the possibilities as per F1 help given for open dataset , but still there is problem with opn file in appending as well output mode.However the file successfully open in Input mode(Read).
    Please advice suggestion to resolve this issue.
    Thanks.

    Messgae captured as 'Permission Denied". The program gets triggered with system user Id PPID.
    How to check the security access of the User ID.

  • Unable to Open .pdf and not allowed to update the Reader

    I work for a State Agency that sends out .pdfs created with Adobe Acrobat Pro 9 to other State Agencies as an email attachment.
    We put security on the .pdf allowing only printing of the document.
    We have been doing this for years with no problems; however, we recently added a new branch of agencies to receive them.  Many of these agencies are unable to open the .pdf.
    I suggested they update to the Reader X, but they say they are unable to update the Reader because, "Our IT department does not have the capability to upgrade my adobe without it affecting the daily operation of my case management system."  Apparently, they have lots of forms that they will be unable to use if they upgrade.
    So, my question is:  Is there some other way the agencies can view and print the .pdf we are sending to them?
    Thank you so much for your help!

    Wendy7390 wrote:
    When they try to open the .pdf, they get an error message that says the file is damaged.  I have not gotten a more detailed error message than that.
    That could be enough.
    Some email systems use encoding on files to make the transfer a little faster. When they are decoded at the receiving end, they can become corrupt.
    One way to test if this is the issue would be to Zip the file first, email it, and see if they can unZip the file and open it. If that works, then encoding is the problem. Not sure what can be done about that other than to Zip all files or post the files to a server and send them a link.
    I also seem to remember a conversation a long time ago about some newer files not being readable in Reader 5 and it tossed up that same error message but unfortunately, I'm depending on memory for that one and can't seem to find that old thread.
    But try a testing a Zip file and see if that works first.

  • Acrobat X Pro - Unable to open the document

    I'm having issues testing Acrobat X Pro trial version and Office 2010 on XP Pro SP3.  When trying to convert a Word document I consistently get the message - Unable to open the document.  Please check to see if you have read permission for the above file.  If I hit "Retry" a few times it will eventually convert the document.  If I initiate the conversion from within Word it seems to work fine. I've confirmed that permissions are not the problem.  It doesn't matter if the files are on the C: drive or a network location.  Most of my users use the combine so converting from within Word is not an option.  Any help would be greatly appreciated!

    Sorry but no.  Big bummer.  Keeping me from going to Win7 and Office 2010 on many systems. Honestly,  I haven't looked to see if there are any patches avaliable since I orginally posted.

  • Encounters Open Conversions when performing Application ServiceTools import

    Hi,
    I am trying to apply Application Servicetools for R/3 46C - 01L_R3_46C into our Production system and I encounter Open Conversions in the ABAP Dictionary. Apparently, An index exists in the database but not in ABAP Dictionary and stop me from progressing.
    It advises me to proceed as follows:
    Open a new session
    Start the Database Utility (txn SE14)
    Correct the inconsistencies for the specific objects
    Repeat the import phase. If no more inconsistencies are found, the import continues
    My question is:
    1. Do I perform 'Activate and adjust database' in txn SE14 for this case?
    2. Is there any risk or issues if I were to delete this index at the Oracle level?
    This is a Production system and I am unable to simulate in other servers. Your help will be greatly appreciated.
    Thanks,
    Annie

    Reply from SAP and I confirm the transport works successfully after performing the below steps.
    "Please check table LIKP in SE14, are both Database object check and
    Runtime Object check are consistent? If so this entry can be deleted by:SE14->menu DB Request/created with import->select the entry and delete.
    Then continue with SAINT, let me know if there's still a problem"

  • I am unable to open another Firefox4 window when I have the Error Console open and I can't open the Error Console when I have two Firefox4 windows open. Is anyone else having this problem?

    I am trying to debug the jQuery to a micro site I've created and I am unable to open the Error Console when I have two Firefox windows open and I am unable to open a second Firefox window when I have the Error Console open.
    I am using Mac OS X 10.6.7 and I am using Firefox 4.0.1

    I personally haven't experienced much of the "reverberation/feedback" when using a headset on the i4S...
    Yes, I have near-perfect hearing too (for scope, squeaky brakes hurt my ears) I come from many conversations on many phones and types and first off, CDMA technology is great for coverage, terrible for voice quality. HD Voice in Europe made for some of the best phone conversations I've ever had.
    Back on track, feedback is most noticable (similar to the landline phone) when using the iPhone without a headset, but for me it's not an absolute criticality mainly because I use VoIP apps alot, so maybe it has desensitized me some over the past year.
    But whenever I'm on a call, and the other person has me on speakerphone, I have alot of trouble talking because of the feedback loop caused. So the less of my voice I hear the better I can talk.
    Have you tried a bluetooth headset yet?

  • Unable to open Blackberry Messenger Conversati​ons

    I can't open my Blackberry Messenger Conversations! When a friend sends me a message, I can the message in my mailbox, but am unable to open it... when I try to open it I'm relocated to the messenger conversation that I last sent my friend, but unable to see/open their response. 
    Also, I'm unable to add any contacts to my BBerry Messenger... when I try to add a contact, I'm taken to my address book. When I try to select a contact to add I do not have the option to "Request by Email" or "Request by PIN." 
    Help! This is so frustrating!
    Thanks so much!!!!!! 

    Hi
    I am getting the same problems as well, although my BBM was working fine up to a week ago when my Blackberry dumped all my messages due to storage overcapacity.  I have resolved this since by deleting unwanted files such as photos.
    Did you get any solutions to this problem as it is annoying as I can only read the last sentence of the conversation?
    Thanks

  • Unable to Name conversation

    I have an iPhone 5C running iOS 8.2. I am unable to name a convesation in Messages. I swipe down, but there is no field to name the conversation, as I have seen it mentioned online.  Also, I do not have the ability to add a contact to a conversation. I know that when you hit Details, there is the list of people in the conversation, and under that should be a plus sign to click on. I do not have that.  Has anyone had this problem, or know how to fix this? Thanks in advance!

    Finally had the time to do a self-reply.
    Just in case you're wondering, this issue was resolved. Here's what I tried:
    1. Remove and re-add my email account to my BB: failed.
    2. Remove, hard reset, and re-add my email account to my BB: failed.
    3. Perform a clean reset in my BB: feels like re-installing Windows; no way I'm doing this.
    4. Use the Gmail application for BB: solved.
    No more problems opening conversations from a mailing list when I'm using Gmail application.

  • TX Unable to open PDF docs

    message ~ memory cache is full, please soft reset.  No change, still unable to open PDF docs.  How do I clear memory cache or is PDF reader defective?   
    Post relates to: Palm TX

    Adobe for Palm is an ancient program that requires you to convert the raw PDF files on your desktop before you can sync them on a PalmOS device.  Are you using the converter program from Adobe?
    I gave up on this program a long time ago, and switched to the freeware "PalmPDF" available on freewarepalm.com.  You can put raw PDF's on an SD card and they can be read by the program with no conversion necessary!
    Wyrenut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Unable to open .PPTX files?

    Hello,
    I'm hoping someone might be able to help me. I am unable to open my college's lecture notes which are in the form of a Power Point presentation. I am running MS Office 2011 which is fully updated. I have attached some screen shots with the hope that someone might be able to help me out. The file will not open, and when I click repair it tells me that the file is either corrupted or was made with an older version of Power Point. Any help would be appreciated!!

    Download/use these programs and see if they work for you...
    Mac OS  
    Microsoft PowerPoint 2011
    info
    Microsoft Office Open XML File Format Converter
    info
    Apple Keynote 5.1
    info
    OpenOffice.org
    info
    Planamesa NeoOffice
    info
    LibreOffice
    And if that doesn't work, try FREE online file conversion sites, like...
    Convert PPTX to PPT Free
    http://www.pptx2ppt.com/
    Convert-doc.com - Free and Secure Online File Converter
    http://www.convert-doc.com/
    Free Online pptx to ppt Converter
    http://www.ofoct.com/pptx-to-ppt.html
    http://www.zamzar.com/
    Free online file converter
    http://www.online-convert.com/

  • 6300 video error (unable to open file)

    hello
    i am new to nokia phones
    i got my new nokia 6300 and i used the same software that phone came with on CD to convert a video file (from .avi to .mp4)
    when i try to play this clip on mobile it says "unable to open file" i tried many different videos but no luck
    does anyone has this same problem?
    i got Nokia pc suit ver 7.0.9.2
    and phone ver 07.00
    thanks

    Sorry guys but 6300 does support 3gp and mp4. While the display is QVGA [320x240], the video NEEDS to be QCIF [176x144] pixel for 6300 to be able to play the video afaik.
    PC Suite 7 is a little confusing than last version for me coz it does not indicate the video size or gives you the option to choose the size from the player.
    You can check that it's set to convert when transferring files.
    Nokia PC Suite, click settings > video conversion options set to always ask or convert automatically when copying to phones as opposed to do not convert.
    Check also that if you're converting and transferring videos separately/manually, that you are sending the converted video and not the original video. Refresh the list. Hopefully, you wont need to reinstall the pc suite or use the older 6.++ ver.

  • I am unable to open my Photoshop program after installing the entire Creative Suite: Premium Production 6. All other programs work, but with Photoshop it says that the program is "locked or in use by another user". I need this fixed immediately.

    I am unable to open my Photoshop program after installing the entire Creative Suite: Premium Production 6. All other programs work, but with Photoshop it says that it "Could not open a scratch file because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the 'Properties' command in the Windows Explorer to unlock the file." Then I select "OK" and the next message comes up "Could not initialize Photoshop because the file is locked, you do not have the necessary permissions, or another program is using the file. Use the 'Properties' command in the Windows Explorer to unlock this file. I installed all of the programs on the same day from a CD. I need this fixed immediately.
    I am not interested in switching to Creative Cloud, so don't even suggest it. I spoke to Mashmi (or something to that effect) on the "Support" Chat and there was absolutely no support. Useless actually.
    Thanks in advance.

    Could not open a scratch file because the file is locked or you do not have the necessary access privileges. (…) | Mylen…
    Mylenium

  • I am unable to open raw files from my Canon T1i in Adobe Camera Raw of my version CS3 of Photoshop.  I have tried to update my ACR by downloading version 4.6 from the Adobe website but I am still unable to open raw files, just JPEG.  Is there a way to use

    I am unable to open raw files taken on my Canon Rebel T1i in my version of Photoshop CS3.  When I import raw files into Bridge they come up as patches with CR2 on them and when clicked on, a notice comes up stating that Photoshop does not recognize these files.  I tried to update my Adobe Camera Raw by downloading version 4.6 from the Adobe Website, but when I clicked on the plus-in, I got another message that Photoshop does not recognize this file.  I spoke with a representative from Canon who said that I could not update CS3 and that I should subscribe to the Cloud.  I would prefer to use my CS3, if possible.  Can anyone advise me what to do?

    The T1i was first supported by Camera Raw 5.4 which is only compatible with CS4 and later
    Camera Raw plug-in | Supported cameras
    Camera Raw-compatible Adobe applications
    Some options:
    Upgrade to CS6
    Join the Cloud
    Download the free Adobe DNG converter, convert all T1i Raw files to DNGs then edit the DNGs in CS3
    Camera raw, DNG | Adobe Photoshop CC

Maybe you are looking for