Unable to open CR2 files in PSE8 or Bridge CS4?

Unable to open CR2 files in PSE8 or Bridge CS4? Any help would be appreciated.

You would need PSE 11 to open those files directly into PSE. Your options are:
1. Use DPP instead.
2. Download the free DNG converter and use that to convert your raw files to dng files that your version of the raw converter can open:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5518
3. Upgrade to PSE 11, although that won't help Bridge any.

Similar Messages

My friend is unable to open CR2 files in bridge but I can in CS6. How can I help him

My friend is unable to open CR2 files in bridge but I can in CS6. How can I help him

What version of Bridge and Camera Raw is your friend using? And what camera is this from?
Each camera must be supported specifically and older versions of Adobe products don’t get updated for newer cameras.
Your CS6 is obviously new enough and has been updated to a new enough version of the Camera Raw plug-in but perhaps theirs is older or hasn’t been updated.
Here is a list of cameras that Adobe supports along with the version of the Camera Raw plug-in that is needed to read them:
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
For versions older than CS6, the highest CR version is +1 of the CS version—CS5 can use CR6.x but not CR 7 or 8.
The exception is CS6 which is still be sold by Adobe so can be updated to CR8 even though it initially shipped with CR7.

Unable to open CR2 files elements 10

I know this problem has been disscussed on multiple occassions but i am completely baffled.
Recently elements has been unable to open any new CR2 files saying they are the wrong file type. The reason i am baffled is when i bought the software (month or two ago) i could open and edit CR2 files successfully, now elements can't open any of the recent CR2 files taken and will only open certain CR2 files that i have had stored on my computer, all of which previously worked.
The Camera RAW plugin is up todate (6.6) and i have tested the SD card in another computer and worked fine. I have tried different cables in my computer and other computers in case the cable was the problem and they seem to check out fine. I have manually downloaded the plug in and checked if the plug in patch was in the correct folder, which it is, as well as re-installing the programme all to no success.
I just cant understand why the problem has started now after originally working fine. Can anyone provide some advice?

Hi,
I connect to the PC by cable. I have checked the Canon codecs and it appears to be up to date.
The photos seem to transfer to the computer fine (they at least appear on the computer, with the icon showing a preview of the image) the problem is opening them in the editor.
I shoot in RAW and JPEG and i am able to open and edit all the JPEGs.
As you say the 1000D has been supported for some time and a couple of months ago when i bought elements i was able to edit the RAW files, the problem has occurred in the last month which is the strange thing.
I cant see the cable being the problem seeing as all the JPEGs open fine, and i have used the cable to connect other cameras up to the computer with no problem.

Unable to open CR2 file in elements 11

Everytime I try to open a CR2 file i get an error saying
"could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit the Camera Raw help documentation for additional info."
I am shooting with a Canon 6D and Canon 60D so I know the camera models are supported. I have already updated to the 7.1 version of Camera Raw.
I have been trying to look for solutions for about two weeks now with no success... PLEASE HELP!!!

Make sure you're online with a good connection, open PS 11, click on the Help menu and select "Updates.." on the bottom. The rest should be automatic. It should upgrade you to 7.4.

Can I open RW2 files on Photoshop or Bridge CS4?

I have a Mac running OX 10.9.1. I have CS4 installed on my computer and would like to figure out how to open RW2 files in Photoshop/Bridge. The camera I used is a Panasonic Lumiz FZ40. I have Camera Raw version 5.7.0.213 installed.

Hello, the best when facing such question is to google "Camera Raw supported" so that you get that page: http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
In your case, you need at least Camera Raw 6.2, that is compatible with CS5.
Luckily for you, Adobe has developped the DNG converter that can convert your RW2 to DNG files that Camera Raw 5.7 (*) will be able to open and process.
Get the latest version: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5695
(*and all the programs fully compatible with the DNG spec that do not open the RW2 from the FZ40)

Photoshop CS5 won't open CR2 files. Running OS X 10.10.1 and camera raw version 6.7.1

Photoshop CS5.1 will not open CR2 files. I am running OS X 10.10.1 and adobe photoshop camera raw 6.7.1. It was working fine when I had OS X Mavericks. It wasn't until I updated to Yosemite that the problem started.

Hello,
I had recently bought an iMac but I'm unable to open cr2 files when I'm trying to do a double click(or doing a preview) to open in Yosemite. Although I can open them in Lightroom 5.7 and could not in CS6(understand I need to upgrade it). I know there should be a way to open cr2 files by directly double clicking on the image, but as of now I'm unable to find in the net.
Any help is appreciated.
Thanks.

Opening cr2 files in Yosemite

Hello,
I had recently bought an iMac but I'm unable to open cr2 files when I'm trying to do a double click to open in Yosemite. Although I can open them in Lightroom 5.7 and could not in CS6(understand I need to upgrade it). I know there should be a way to open cr2 files by directly double clicking on the image, but as of now I'm unable to find in the net.
Any help is appreciated.
Thanks.

Yes, I do not have any problem when opening with iPhoto.
How are you "opening" in iPhoto? Simply browsing the photos in iPhoto will may be using use the embedded preview images. Can you edit your photos in iPhoto or export them using "File > Export"? Only if you can export a photo or edit it in iPhoto using iPhoto's editor, you can be sure, that the the RAW support for your camera is properly installed.
Your camera needs this RAW compatibility update to be installed -see this link: Digital Camera RAW Compatibility 6.01
Have you installed all recent RAW compatibility updates? And for the applications to find the installed RAW support it needs to be registered with the Launch Service database using the lsregister command. This database keeps a list of supported media formats. Sometimes this list will be outdated and recent entries missing.
In that case it can help either to reinstall the RAW support, see this post:
Re: Digital Camera Raw Compatibility 6.02 - Nikon D800
Or to run register it manually by running the lsregister command from the Terminal:
Re: iPhoto 9.6 cannot share with iMessage

I am unable to open raw files from my Canon T1i in Adobe Camera Raw of my version CS3 of Photoshop. I have tried to update my ACR by downloading version 4.6 from the Adobe website but I am still unable to open raw files, just JPEG. Is there a way to use

I am unable to open raw files taken on my Canon Rebel T1i in my version of Photoshop CS3. When I import raw files into Bridge they come up as patches with CR2 on them and when clicked on, a notice comes up stating that Photoshop does not recognize these files. I tried to update my Adobe Camera Raw by downloading version 4.6 from the Adobe Website, but when I clicked on the plus-in, I got another message that Photoshop does not recognize this file. I spoke with a representative from Canon who said that I could not update CS3 and that I should subscribe to the Cloud. I would prefer to use my CS3, if possible. Can anyone advise me what to do?

The T1i was first supported by Camera Raw 5.4 which is only compatible with CS4 and later
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
Some options:
Upgrade to CS6
Join the Cloud
Download the free Adobe DNG converter, convert all T1i Raw files to DNGs then edit the DNGs in CS3
Camera raw, DNG | Adobe Photoshop CC

I am trying to open CR2 files from a Cannon EOS 1DX camera in Photoshop CS6 and I have already updated the Camera Raw Plug in but Photoshop is still giving me the cannot open files dialog box? Help?

I am trying to open CR2 files from a Cannon EOS 1DX camera in Photoshop CS6 and I have already updated the Camera Raw Plug in but Photoshop is still giving me the cannot open files dialog box? Help?

Canon 1DX support was added to ACR in version 6.7, 7.1. An updated CS6 should be at level ACR 8.6. If your ACR is not at level 8.6 try using CS6 menu Help>Updates. If that does not install ACR 8.6 try downloading the ACR and DNG 8.6 converter and see if ACR 8.6 will install into your CS6.
Adobe - Adobe Camera Raw and DNG Converter : For Windows
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh

Can't open CR2 files in photoshop and camera raw

This weekend I rented a Canon 5D Mark iii. I have downloaded the files and all of the thumbnails in camera raw say CR2 and when I try to open Photoshop does not recognize this product.
I have:
Photoshop CS4
Camera Raw CS4
Canon 5D Mark ii
I have checked my updates folder and all my updates are current. Do I need to upgrade to CS5 or is there a way around this?

Hi I recently had a problem opening CR2 files in PHotoshop cs4. I had to reinstall into a new computer, so obviously it installed the basic programme and not the updates.
After trying everything, even calling the help desk, there was apparently nothing that can be donw as they no longer support cs4.
I kept trying and found a you tube video, which i cant find again to add the link but i followed the link and with what I did earlier I can now open CR2 files in my photoshop cs4
I found the relevany update that I needed to install and downloaded it, camera raw 5.2 ( Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 5.2 update ) this is the one for the Canon 5d Mk2
After downloading it would not update the progeramme so I was in the same possition, but i noticed the files were there and i just needed to put them in the right place in photoshop so carried on looking for were to put the Plus In.
This led me to the video.
To the point.
Download the update and save to a location where you will remember.
open Adobe photoshop and go to "edit"
Them " Preferences "
then "General "
Then " Plus-Ins"
At the top you will see " Add Plug-Ins Folder " Check this box then navigate to the "win64" ( this is because mine is a windows 64 bit computer and the download is specific ) and Choose it.
Shut down photo shop and try to open a raw.
Bridge doesnt work for some reason but im going to keep looking.
Hope this works for you as well.

Can't open CR2 files in PhotoShop CC. Raw plugin version is 8.3.0.141. MacBook Pro OS 10.9

I'm trying to open .CR2 files (Canon EOS Digital Rebel XS) with PhotoShop CC on my Mac. When I try to open them I get an error saying the file can't be opened. The raw plugin version is 8.3.0.141. Adobe's charts say I need at least "4.6,5.1" so I would assume my version should open it. What gives?

First thing I should do is to link you to the Camera Raw forum where the members there have a far better understanding of Camera Raw problems than I do.
If the generic advice doesn't work, it's time to bring in the specialists. Click on that link and post your problem with the CR2 files.
Adobe Camera Raw
Gene

ERROR: Unable to open TUXCONFIG file

Hi,
I installed and installed the following software successfully on Windows XP
Oracle WebLogic Server 11gR1 (10.3.1) Microsoft Windows
PeopleSoft Enterprise PeopleTools 8.50
PeopleSoft Enterprise Human Resources Management System 9.1 - Revision 2
Tuxedo 10gR3 for MS Windows Server 2003 w/MS VS 2005 (32-bit x86, AMD64/EM64T x64) 32-bit
i am at the point of installing the Application Server. Domain created sucessfully but i got boot errors as shown below.
I searched for the TUXCONFIG file but could not find it in the tuxedo installation folder.
I read that i have to create the TUXCONFIG,if missing, using tmloadcf.exe and the ubbconfig file, but the only UBBCONFIG file is located in "\samples\atmi\rpcsimp\" folder.
How do i create the TUXCONFIG file?
Did i miss something with the installation? What location should this file exist after your tuxedo installation?
thanks
K
BOOT ERRORS:
PeopleSoft Domain Boot Menu
Domain Name: hrms
1) Boot (Serial Boot)
2) Parallel Boot
q) Quit
Command to execute (1-2, q) [q]: 1
Attempting to boot bulletin board...
tmadmin - Copyright (c) 2007-2008 Oracle.
Portions * Copyright 1986-1997 RSA Data Security, Inc.
All Rights Reserved.
Distributed under license by Oracle.
Tuxedo is a registered trademark.
No bulletin board exists. Entering boot mode.
115818.SU1491!PSWATCHSRV.5832.6140.-2: LIBTUX_CAT:1519: ERROR: TUXCONFIG value (C:\Documents an
d Settings\klondon\psft\pt\8.50\appserv\hrms\PSTUXCFG) is longer than the allowed length of 64
115818.SU1491!PSWATCHSRV.5832.6140.-2: LIBTUX_CAT:588: ERROR: Unable to open TUXCONFIG file
115818.SU1491!PSWATCHSRV.5832.6140.-2: LIBTUX_CAT:6272: ERROR: Unable to get bulletin board par
ameters
115818.SU1491!tmboot.2652.1488.-2: CMDTUX_CAT:825: ERROR: Process PSWATCHSRV at SU1491 failed w
ith /T tperrno (TPESYSTEM - internal system error)
115818.SU1491!tmboot.2652.1488.-2: tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; init
iating user error handler
115821.SU1491!BBL.2956.4352.0: CMDTUX_CAT:26: INFO: The BBL is exiting system
115825.SU1491!PSADMIN.3088: End boot attempt on domain hrms
Edited by: user2932595 on Apr 17, 2010 1:17 PM
Edited by: user2932595 on Apr 17, 2010 1:21 PM

Hi
The TUXCONFIG file normally is created automatically when you create your domain.
In this case I think you ran into trouble because the path of installation is too long!
Note the error in your log:
115818.SU1491!PSWATCHSRV.5832.6140.-2: LIBTUX_CAT:1519: ERROR: TUXCONFIG value (C:\Documents and Settings\klondon\psft\pt\8.50\appserv\hrms\PSTUXCFG) is longer than the allowed length of 64
Your path is 69 chars long!
I would suggest that you re-try the configuration with a shorter tuxedo and PS_HOME: perhaps in the root directory (c:\PSHOME)
In the past I've also noticed that installations have problems with paths that have spaces - ex: 'Documents and settings' , so I would avoid that as well.
Edited by: Alternate on Apr 19, 2010 2:00 AM

ERROR: Unable to open structapps file!

Hello,
Having modified the structapps.fm in FM10, I am getting the following error within a dialog when attempting to use the same file in FM8:
ERROR: Unable to open structapps file! FA_errno -43
Is FM not backward compatible ? OR do I need to reread the file in FM8
Thanks

The file should be saved in the FM version that you're using it in. You can't use any newer FM version file in any older version of FM, e.g. FM8 can't open any FM10 files (except for the MIF formats).

ZAV 10 - Unable to open parameter file error

When trying to launch a ZAV 10 app, C-Cure Administration Console, users are getting an error "**Unable to open parameter file cc800cl.pf, errno 2. (1247)". This only appears to be happening on Win7. This did work when first created, but after a few weeks the error has started to pop-up.

If this was working and is not now, and you are certain nothing has changed on the client systems (or at least nothing that could interfere here), then this might be an issue with the license used when building the application. What is the expiry date of your license and was it applied prior to building this exe?
If this isn't expiring please open an SR for this issue, if you can. This is the information the support team will require:
- Copies of any warnings or errors around the time the issue occurs (or a copy of the application and system event logs, in .evtx format)
- A copy of the exe you are using
- If you can build the exe again as a diagnostic-mode executable and provide the diagnostics generated when attempting to run, that can be very helpful
- It may also be required that you send installation media for the application and your build process, so the team can attempt to reproduce the issue in-house
- You will also typically be asked for the .xappl file and associated Files folder, if reproducing in-house is required. This will become absolutely necessary if a ticket needs to be filed with Spoon, so sending it ahead of time is a good idea

"Unable to open config file" Error when starting tomcat

hi all,
Here is the output from two of the log files when I start tomcat4 on my linux box. I have configured the mod_jk on the tomcat side.
From the output of the second log file, it seems that the ajp13 worker I defined was started successfully. What I don't understand is the following:
1) In catalina.out, where des the line 'Unable to open config file' come from? Which config file?
2) Tomcat4 is supposed to generate a mod_jk.conf automatically, but I don't see any file generated in 'conf/auto/'.
Content of 'catalina.out'
Unable to open config file
Starting service Tomcat-Standalone
Apache Tomcat/4.0.4
Unable to open config file
Starting service Tomcat-Apache
Apache Tomcat/4.0.4content of 'catalina_log.2002-08-16.txt'
2002-08-16 01:05:22 HttpConnector Opening server socket on all host IP addresses
2002-08-16 01:05:28 Ajp13Connector[8009] Opening server socket on all host IP addresses
2002-08-16 01:05:28 Ajp13Connector[8009] Starting background thread
2002-08-16 01:05:29 Ajp13Processor[8009][0] Starting background thread
2002-08-16 01:05:29 Ajp13Processor[8009][1] Starting background thread
2002-08-16 01:05:29 Ajp13Processor[8009][2] Starting background thread
2002-08-16 01:05:29 Ajp13Processor[8009][3] Starting background thread
2002-08-16 01:05:29 Ajp13Processor[8009][4] Starting background thread

I have all those files too.
I think the 'config file' mentioned in the error log is the mod_jk.conf.
On Jason Hunter's tomcat4 guide, it says don't use the tomcat4 RPM to installed. What is the difference bettween the RPM version and the tar.gz version? The only difference I can think of is that in the RPM version, the conf directory is in the 'etc/tomcat4/conf'. Could it be the reason that tomcat4 cannot read the config file? But it has no problem reading the server.xml though.

Unable to open CR2 files in PSE8 or Bridge CS4?

Similar Messages

Maybe you are looking for