Unable to open data process control

Hi,
While I open Data Process Control, it prompt error as below. How to fix it?
An error occurred while initializing POV data. Confirm that metadata has been loaded and that you have sufficient security rights.+

Hi
According to Oracle Support, the cause of the issue is:
The file HsvWebSessionWSP.dll was not registered properly. This file will be in HFM Webserver under the location <MiddlewareHome>\EPMSystem11R1\products\FinancialManagement\WebServices.
And the solution is:
Re-registering the HsvWebSessionWSP.dll file should resolve the issue, by using this command: regsvr32 "<MiddlewareHome>\EPMSystem11R1\products\FinancialManagement\WebServices\HsvWebSessionWSP.dll"
Hope this helps.
Cheers,
Lu

Similar Messages

  • Unable to open 10g Database Control Webpage from another computer

    Unable to open 10g Database Control Webpage from another computer
    Hi Gurus
    I have just installed Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 on my PC Windows XP , created database and configured DB control
    I can open Database Control Webpage on the database machine by typing
    http://USI2374993VND0.vlgdw2k.visteon.com:1158/em
    or
    http://136.18.70.189:1158/em
    But can not open it from another PC
    When I do following from another PC
    1. http://USI2374993VND0.vlgdw2k.visteon.com:1158/em
    Get error: [code=DNS_NO_DATA] The IP address was not found during the DNS lookup. Contact your system administrator.
    2. http://136.18.70.189:1158/em
    Get error:Can not display web page
    I can ping 136.18.70.189 but not USI2374993VND0.vlgdw2k.visteon.com
    On the other PC I also tried adding 136.18.70.189 to
    tools - internet options - security - local internet - sites - advanced - add this web
    site to the zone as http://136.18.70.189
    But it did not work
    Please help with any ideas
    Thanks a bunch
    New DBA

    Firewalls?
    DNS translation issues?

  • Unable to Open Date & Time

    I have been unable to Open Date & Time for several weeks now despite many attempts, rebootings and re-attempts. I get a "System Preferences has quit unexpectedly" message. It wasn't much of an issue when the time was correct, but the clock has recently reverted to December 31, 1969 and goes back to that date with each reboot. I have to hit a Continue button every time I go to a new website in Firefox (Safari no longer works) due to the time issue, and I can't purchase anything in iTunes.
    Any suggestions?

    Welcome to Apple Discussions!
    One thing to try is to go to Disk Utility (in the Utilities folder) and verify and repair if necessary both permissions and the disk. If the start up disk needs repair, you will need to use the Disk Utility on one of the gray original discs that came with your computer. While you have the original discs out, you might try running the Apple Hardware test and see if anything shows up.
    It also could be that your OS has become corrupted. If this is the case, you will need to reinstall it. But be sure and back up all your data before taking this step.
    Please post back with any results.
    Good luck!

  • Unable to open application server control page

    Hi,
    i have a problem to open application server control page in client machine.
    below is the error gets while opening the page;
    ERROR:
    'An error was encountered while loading page. There was a communication problem contacting the agent. This may be a transient network problem. There was a communication problem fetching monitoring data. This may be a transient network problem'
    Please help me to sort out this.
    Thank you,
    Naresh.

    See this thread: Uanble to open the App server console after installing the Oracle soa suite
    Hi,
    Are you sure you have configured a EM? Did you select "Configure this as an Administration OC4J instance" during the installation?
    Regards,
    Martin
    Regards,
    Martin

  • Unable to open data modelere in NDS

    Hi
    I am unable to open My Data Modeler in NDS. on click of which it just flickers. it dosent open at all.
    I have checked Error Log too, it shows following errors
    Error  Apr 24, 2006 11:31:26.27 Exception occurred in listener of Java element change notification
    java.lang.IllegalStateException
    at com.tssap.selena.internal.java.scanner.ClassProcessor.checkAssertion(ClassProcessor.java:64)
    Is this causing the problem, if yes can u help me with the solution
    or is there any other problem. It was working fine even yesterday, suddenly stopped functioning.
    Thank you.
    With Wishes
    Krishna Kanth

    Hi
    I have done that but again while opening up NDS it is giving metadata problem in workspace. and unable to open up NDS.
    i have admin rights too.  i tried to change the workspace also but of no luck the NDS is not opening, NDS opens up only when i copy the previous .metadata folder into the workspace again.
    Thank you.
    With Wishes
    Krishna kanth

  • Unable to open Data Schema in xml form builder

    Dear team,
    i am trying to implement newsletter to my client for htis i have open formbuilder when i created a project and trying to open DataSchema to create child nodes i have double clicked on + sign but it is not at all opening Data Model option it not responding anything.
    Can anybody please let me know the possible reason for why it is not opening .
    Thanks in advance.

    Hi,
    What is the Java Applet version you have in the browser?Update your JRE version in your system. It will solve the problem.
    To do this goto Controlpanel -> Java . This will open a pop up. Then go to Update TAB and click on Update button to get the recent version of JRE.
    Thanks,
    Mahendran B.

  • Unable to log into Process Control 2.5

    Hi all,
    I'm currently trying to install PC 2.5 and I'm getting an error while trying to connect to it using the NWBC. I can see the login screen in NWBC, then once logged I get the following error message "Could not load content from connection Process Control 2.5 (error: Invalid server response)"
    I don't think i've missed any configuration steps... but I haven't been able to find out how to solve this problem..
    Does anyone has an idea ?
    Thanks.
    Here is an extract from the trace file of the NWBC:
    09.09.2008 23:34:38
      ERROR   <NWBC::CBackendConnection> | failed to startup connection Process Control 2.5 !
      ERROR   <NWBC::CConnectionManager> | failed to startup backend connection Process Control 2.5 ! (error code 80070005)
      ERROR   <NWBC::CConnectionManager> | Failed to load content from connection Process Control 2.5 ! (error Forbidden (403), error code 80070005)
      DEBUG   <NWBC::CFoundation>        | EvLoadingConnectionFailed(which Process Control 2.5 - , error Could not load content from connection Process Control 2.5 - Logica (error: Forbidden (403)))
      DEBUG   <NWBC::CDalClientApp>      | EvLoadingConnectionFailed(which Process Control 2.5 - , error Could not load content from connection Process Control 2.5 - Logica (error: Forbidden (403)))

    Hi Jerome,
    Have you had this issue resolved?  If you still have issue, please check on the following.
    I.Prerequisites
    In order to install the NWBC, verify the following components are installed.
    - Windows platform at the clientu2019s desktop level
    - SAP GUI 7.10 PL8 and above (I am using PL10)
    - SSO2 cookie enabled. For more information, see the SAP Notes:
         Checking the SSO Configuration u2014 817529
         Note: make sure in RZ10, you have seen the following system paratmeter setting.
                  login/accept_sso2_ticket    = 1.
                  login/create_sso2_ticket    = 2 (recommended) or 1.
    II, Check the SAP ICF service.  Activate all GRPC Service at /sap/bc/webdynpro/sap and /sap/grc/nwbc/pc.
    III. Delete the cache from the IE browser.
    Regards,
    Jennifer
    GRC RIG

  • Unable to open application server control console on rhel4

    Dear All
    I have installed oracle application server 10g R2 forms & Reports services on RHEL4.
    While trying to open apllication server control console browser is showing following error
    "Connection refused when attempting to contact"
    Due to this problem, i am not able to access forms and reports which is deployed on same server.
    Please tell me the solution to resolve this issue.
    Thanks
    Vishal

    Due to this problem, i am not able to access forms and reports which is deployed on same server.Things are not related with each other, you can run forms and reports without having control console running, and viceversa.
    That said, did you start forms and reports and control console ?
    $ opmnctl startall
    $ emctl start iasconsole

  • Unable to fetch data using control-blocks

    Hi,
    I have created two non base table text items(from_date, to_date) and if values are not entered from front end i.e. null then hadrcoded in pre_query trigger to default values as from_date (system date-present month-last year) and to_date(system date-present month-present year).when i have pressed the fetch button without giving values to from_date and to_date,it is retrieving data in default period,which i ahave hardcoded in PRE_QUERY trigger.But even i enter values dynamically from front end and when ever i press fetch button ,it is retrieving data in default period instead giving data in specified duration what i have entered dynamically from front end. i.e. it is not accepting values what i have entered.
    any one please help me.
    oracle forms 10g version:10.1.2.0.2
    Thanks and Regards
    Ram

    hi,
    Thanks for ur feedback.
    here query is executed. My problem is,unable to fetch data in specified period,what i have entered dynamically.Even i entered dynamically,it is fetching data in default period(Which i have hardcoded in PRE_QUERY).
    below code is ,what i have hardcoded in PRE_QUERY
    :GLOBAL.DFROMDT := NULL;
    :GLOBAL.DTODT := NULL;
    IF :HEADER_BLOCK.NBTFROMDT is NULL THEN
    SELECT TO_DATE('10'||'/'||TO_CHAR(ADD_MONTHS(SYSDATE,-1),'MM')||'/'||
    TO_CHAR(ADD_MONTHS(SYSDATE,-12),'YYYY'),'DD/MM/YYYY')
    INTO :HEADER_BLOCK.NBTFROMDT FROM SYS.DUAL ;
    END IF;
    IF :HEADER_BLOCK.NBTTODT IS NULL THEN           
         SELECT SYSDATE INTO :HEADER_BLOCK.NBTTODT
         FROM SYS.DUAL;
    END IF;
    IF :HEADER_BLOCK.NBTFROMDT IS NOT NULL
    OR :HEADER_BLOCK.NBTTODT IS NOT NULL THEN
    :GLOBAL.DFROMDT := :HEADER_BLOCK.NBTFROMDT;
    :GLOBAL.DTODT := :HEADER_BLOCK.NBTTODT;
    END IF;
    IF :DETAIL_BLOCK.nbtFjdDrCrInd IS NOT NULL THEN
         svWhere_String := 'WHERE FJH_VCHR_DT BETWEEN '''||nvl(:GLOBAL.DFROMDT,TO_DATE(:GLOBAL.DFROMDT,'DD/MM/YYYY'))||''' AND '||
    ''''||NVL(:GLOBAL.DTODT,TO_DATE(SYSDATE,'DD/MM/YYYY'))||''')';
         Set_Block_Property('DETAIL_BLOCK',DEFAULT_WHERE,svWhere_String);
    ELSE
         Set_Block_Property('DETAIL_BLOCK',DEFAULT_WHERE,' ');
    END IF;

  • Unable to open BPM Processes in Jdev post 11,1.1.5 patch BPM PS4 FP

    Hi All ,
    We applied the BPM FP PS4 patch on top of our Jdev 11.1.1.5 installation as per the instructions here -
    http://www.oracle.com/technetwork/middleware/soasuite/documentation/readme-bpm-488324.txt
    But after that we are not open to see the BPM Process in Jdeveloper at all , something which was working fine before we installed the patch.
    Has anyone faced this issue before or knows what should be done please ?

    Hi
    1. After applying FP to JDeveloper, we did not face any issues. We could still open our old processes, business rules etc everything from BPM Project Navigator tab.
    2. So I guess you applied both the below patches to the JDev. In JDev, select your workflow project -> Right click -> Project Properties. In this select Libraries and Classpath and make sure all the modules are in proper and none of them are like in Red Color. Red color means that module location is not found like that.
    soa-jdev-extension.zip - Oracle JDeveloper Extension for SOA
    bpm-jdev-extension.zip - Oracle JDeveloper Extension for BPM
    3. One quick test, create a new test bpm app with one bpm project with all defaults. Then open this newly created bpm process. This wil make sure if your JDev and the new patch is applied correctly or not. Acutally after applying FP, when you open process in the central window on top you will see a new Row with new compoments like Activity, Mail etc on top left corner.
    4. If newly created one works, then check your old project and its properties like that.
    5. Finally, when you try to open it, and if it fails, it should show some error message in the bottom status window. Look what it says.
    We have not faced any issues like this after upgrading to FP.
    Thanks
    Ravi Jegga

  • Unable to open BPEL Control

    HI All,
    I restarted the SOA Suite for some reason and unable to open the BPEL Control
    and getting the following exception:
    Oracle BPEL Server version 10.1.3.1.0
    Build: 0
    Build time: Mon Oct 09 08:44:49 PDT 2006
    Build type: release
    Source tag: PCBPEL_10.1.3.1.0_GENERIC_061009.0802
    Exception Message:
    [java.lang.NullPointerException]
    null
    Exception Trace:
    java.lang.NullPointerException
         at javax.security.auth.SubjectDomainCombiner.combineJavaxPolicy(SubjectDomainCombiner.java:365)
         at javax.security.auth.SubjectDomainCombiner.combine(SubjectDomainCombiner.java:191)
         at java.security.AccessControlContext.goCombiner(AccessControlContext.java:390)
         at java.security.AccessControlContext.optimize(AccessControlContext.java:304)
         at java.security.AccessController.getContext(AccessController.java:385)
         at javax.security.auth.Subject.doAs(Subject.java:393)
         at com.evermind.server.ThreadState.runAs(ThreadState.java:622)
         at com.evermind.server.ejb.interceptor.system.JAASInterceptor.invoke(JAASInterceptor.java:34)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.interceptor.system.TxNotSupportedInterceptor.invoke(TxNotSupportedInterceptor.java:43)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
         at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
         at ServerBean_RemoteProxy_4bin6i8.isDomainListingEnabled(Unknown Source)
         at com.oracle.bpel.client.Server.isDomainListingEnabled(Server.java:451)
         at login.jspService(_login.java:83)
         at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
         at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:453)
         at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:591)
         at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:515)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
         at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
         at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396)
         at java.security.AccessController.doPrivileged(Native Method)
         at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
         at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
         at com.evermind.server.http.ServletRequestDispatcher.unprivileged_forward(ServletRequestDispatcher.java:259)
         at com.evermind.server.http.ServletRequestDispatcher.access$100(ServletRequestDispatcher.java:50)
         at com.evermind.server.http.ServletRequestDispatcher$2.oc4jRun(ServletRequestDispatcher.java:193)
         at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:283)
         at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:198)
         at com.evermind.server.http.FormHttpAuthenticator.reject(FormHttpAuthenticator.java:82)
         at com.evermind.server.http.HttpApplication.checkAuthenticationAndAuthorize(HttpApplication.java:6417)
         at com.evermind.server.http.HttpApplication.getRequestDispatcher(HttpApplication.java:3009)
         at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:736)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
         at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:216)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:117)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:110)
         at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
         at java.lang.Thread.run(Thread.java:595)
    can any one please let me know the reason and solution to resolve this issue.
    Thanks
    Krrish

    Hi Marc,
    Thanks for the reply..
    I tried to perform SOA Suite 10.1.3.1 BPEL integration with Content DB.
    In that process I updated some files: jazn.xml, ns_emails.xml, wf_config.xml.
    however, I replaced back the origional version of this files but I am getting some other issue..
    Unable to make connection between Jdeveloper and SOA suite.
    getting the following error:
    Error getting OC4J Process for: opmn-home+oc4j-192.168.1.11-6003-default: Error connecting to OPMN (is it running?): Connection refused: connect
    I started all OPMN processes.
    when I test the existing conntection in Jdev, it is saying Appl Server Control Failed...
    but I am able to access it from the SOA suite URL.
    Also, I am able to access the BPEL Console only using the bpeladmin login not oc4jadmin.
    Thanks
    Krrish

  • Unable to Open Process Route Tab in DIR (PLM webUI page)

    Hello PLM Guru's
    I am unable to open the Process Route Tab in the DIR Web UI page.I get an error message for "Name: AcfApplet, Publisher : SAP AG , Location :http://..../com_sap_acf_updown.jar".When I click run it keeps running but not opening the Process route page. This does not happen when I open Process route for BOM/Material Master.
    Is there any problem with my browser settings or any SAP config?
    Kindly advice.
    Thanks & Regards
    Jo Pz

    Hi Jo,
    the issue can be with your Java version and SAP ACF version. SAP has just released a new version of ACF which should be compatible with the latest Java version.
    You can try to look on the following SAP notes (take the first as first):
    1224097 - PLM Web User Interface: Installation of Applets
    1868468 - ACF: file upload/download security warning mixed mode
    1958459 - AcfUpDownload, AcfExecute, ActiveXControl: Events werden nicht verarbeitet
    1854273 - ACF-WDABAP: ACFExecute/Upload: Focus problem
    Best regards
    Tamas

  • Automate Process Control to update Review Levels

    Using 11.1.2.2.301
    Is there a process that can automatically start and promote new members to a specific review level, or the review level that its siblings are currently set to?
    Back ground:  At the beginning of each period we manually promote all entities to Review Level 1 which allows our data load automation and consolidation to work as expected.  As we work toward closing the period new members are added to the metadata.  Since these are not at the same review level our automation errors out.  We need everything to be at the same level so the next group can promote on up to following review levels.   We are currently using the filters in the Data Process Control section, but it is very manual and time consuming.  Can automation be created to search through all the affected periods to find any member that is not at Review Level 1 and promote it to that level?   If not automation is there a better way to accomplish this?
    Thanks
    Andie

    Hi Andie
    I know you can use Taskflows to automate Process Control actions so may be worth looking into that, but I have not used that option before so can't comment on how effective it is. Hopefully someone who reads this has a more elegant method of doing it!
    In terms of finding which members aren't at RL1, it is pretty easy to knock up a report in FR or Smart View which can pull all entities at certain review levels, and you could use conditional formatting/supression options to filter out the ones which need promoting. You could run one of these prior to your loads just to make sure that everything is at the right review level and quickly pick up anything which isn't..
    Thanks
    JR

  • Error when attaching Documents during Process Control to Submit Data

    Hi,
    In HFM 411 the user's were able to attach documents (that were earlier uploaded to Custom Documents) in the Process Control while submitting the Data. In 931 they receive an error message that says it is unable to change the review level. However tehy are able to submit the data without attaching documents.
    The security set-up seems to be fine, as the admin receives an error message as well, but this time it says "Invalid Javascript returned by the server".
    Anyone any idea?
    Thank you so much for your help.

    Hi,
    I (as administrator) manage to attach document at every step of review level process.
    Can you check that MaxNumDocAttachments and MaxDocAttachmentSize are correctly set up in the metadata (application settings).
    Besides HFM User Guide stands : "To attach or extract any custom documents to or from the server, you must be assigned the Manage Custom Documents security role."
    Hope this is helpful.
    Regards,
    Lionel.

  • Possible reasons for BCP import failure? [Unable to open BCP host data-file]

    Hi,
    I have inherited a process where a bunch of tables are being prepared locally with python and puched to a database. It fails and I don't know why, though my first thought is access rights. I have admin access to the database (and server?) using SQL server
    authorisation. Here is an example BCP command being churned out by the python script:
    bcp "[TEST].[dbo].[ISP_2014_flat]" in "flat_files/ISP_2014_201504011504.csv" -U admin -P XXX! -c -t ^ -S "xxx20039999\DZUHE00999,2311"
    SQLState = S1000, NativeError = 0 Error = [Microsoft][SQL Server Native Client 10.0]Unable to open BCP host data-file
    What can I check that might be responsible for this problem?
    Thanks,
    Andrew

    Below are points that you can consider:
    I don't think you need double quotes (") around the table and filename.
    If the file is on shared folder, provide the UNC path like
    \\server\folder\file.csv and even if it is in local try providing full path
    Make sure the file is not opened by someone (if it exists already)
    If it works from SSMS and doesn't work if run via SQL Agent then Agent account must have access to the file
    You can see few examples given in BCP Utility and also you may give try using BULK INSERT too
    bcp Utility
    BULK INSERT (Transact-SQL)
    Cheers,
    Vaibhav Chaudhari
    [MCTS],
    [MCP]

Maybe you are looking for