Unable to open Database: TrueSuite Access Manager

Every time I attempt to register fingerprints in the TrueSuite Access Manager, I receive an error that states that it failed to open the specific database.

Hi there, I have the same problem on a Portege R500, short history:
1. Vista was installed with BIOS and HDD password + fingerprint - worked fine
2. Installed XP with the recovery image, re-formatting the HDD
3. The BIOS and HDD fingerprint was accepted (!) - i.e. he remembered the fingerprints on the board
4. But the Windows welcome screen showed "please wait"
5. New installation of actual version of True Suite Software did not help
6. When running the Access Manager and trying to record new fingerprints, it shows "error: database not found"
7. Another observation: clicking delete fingerprint reveals a fingerprint with a scrambled name, it can't be deleted
8. Ignoring the fingerprint reader works (on BIOS, HDD and Windows logon)
9. I believe it would have been better to delete the BIOS and HDD fingerprint in Vista before installing XP. Now there is an inconsistency between the fingerprints on the board and in the Software database - does that help?
Thanks for keep working on it,
Regards

Similar Messages

  • Mac Manager: Unable to open databases

    I'm running the 10.4 upgrade and Mac Manager. I'm suddenly unable to open the MM admin program and am given the following error:
    Unable to open databases on "OurServer" because of an unknown error: A disk error has occurred
    I've tried rebuilding the databases by following the directions in Article 88023, but that hasn't changed anything. I still can't open MM and our users are unable to login.
    Any help would be greatly appreciated

    I have 5 buildings that are still using MM. We recently upgraded the servers from 10.2.8 to 10.3.9. When I try to admin MM on the 10.3 servers from my laptop with 10.4.7 I get an error, something like, unable to access database, folder not found.
    However if I run MM admin from a 10.3 workstation it works fine. have you tried to admin MM from a different workstation?
    iBOOK G4   Mac OS X (10.4.7)  

  • User unable to open Database in RSC 3.1

    Hey Everyone
    I've got a user whose unable to open a database in RoboSource Control 3.1. She receives no error and RSC just sits there like DB connection was never opened. She can open other databases.
    I've tried different accounts on her machine and the database won't open for them either, but her account can open the database from other machines. I've repaired and uninstalled/reinstalled RSC but to no avail. I originally thought this to be a cache problem, but since it's affecting other accounts I'm no longer sure.
    Has anyone seen something like this before?
    Thanks!

    I am out of the office until 27-07-2009.
    If you require assistance please contact the helpdesk at
    [email protected] or +1 709 724 8529.
    Thanks
    Note: This is an automated response to your message  "[RoboSource Control]
    User unable to open Database in RSC 3.1" sent on 7/24/2009 8:43:06 PM.
    This is the only notification you will receive while this person is away.
    This e-mail may contain confidential information and the sender does not waive any related rights and obligations. If you are not the intended recipient please notify the sender and discard it.

  • TrueSuite Access Manager on Portege M700-13P

    Every time I start up my new Portege M700 this program claims that the drivers are not installed for the fingerprint scanner and tries t install them again. TrueSuite Access Manager Installer starts and then it asks me to restart my PC. EVERY time. I am currently ignoring this but it bugs me.
    I can login with the fingerprint scanner which suggests that the message is bogus.
    Anyone recommend a way to resolve this?
    I am tempted to remove the device from the hardware manager and uninstall the software, then restart, reinstall the software then redetect the hardware...
    Anyone got a better idea before I waste my time?
    Cheers,
    Rob.

    OK that didn't work... Here is the step by step what happened...
    Downloaded latest update to Truesuite from Toshiba site.
    Uninstalled the software - revmoed the hardware item from the list in the device manager then restarted.
    Got a message - New hardware (all good so far). I clicked to installed drivers.
    The Truesuite Access Manager program started up to install (? that's odd...)
    Machine claimed all installed ok and offered a restart.
    Restarted and the fingerprint scanner not enabled for logging in (OK it might to be logged in once to get it started).
    Immediately got a message - New hardware (Damn it!!!)
    Waited for full startup sequence to complete... it takes ages thanks to all manner of preloaded stuff.
    Clicked to install new hardware - back to the same thing. It reinstalls the truesuite software again and again and again every restart...
    This is stupid.
    Anyone got any idea what is going to make this work?

  • N95 software update - "unable to open database"

    Hi all,
    Ive just done the update to V 20.0.016 and it seemed to work ok. I can add contacts, add calendar but it wont sync with my PC.
    it gives "unable to open database" on the phone.
    have tried removing the battery for 5 mins, the hard reset (though holding four buttons down was hard), restore to factory settings and reinastalled the update to no avail.
    any clues would be appreciated.
    Adie

    I had the same error message after updating my firmware. However, I had my config set to "delete all" data on phone before copying data from phone to PC. When I removed this setting and actually put something in the phone database all has worked fine.

  • Iphoto unexpectedly Quits - I am unable to open iphoto or access my pictures

    I am experiencing problems opening iphoto of late. Each time I try to open iphoto or access the iphoto library using iphoto after a few seconds I get the message saying iphoto unexpectedly quit. It  then gives me a report and advises that I send to apple, which I do , but I donot see any change. Can anyone help?

    iPhoto 11.
    here you go
    Process:         iPhoto [621]
    Path:            /Applications/iPhoto.app/Contents/MacOS/iPhoto
    Identifier:      com.apple.iPhoto
    Version:         9.4.3 (9.4.3)
    Build Info:      iPhotoProject-720091000000000~1
    App Item ID:     408981381
    App External ID: 15017489
    Code Type:       X86 (Native)
    Parent Process:  launchd [157]
    User ID:         501
    Date/Time:       2013-09-22 19:07:25.696 +0400
    OS Version:      Mac OS X 10.8.5 (12F37)
    Report Version:  10
    Interval Since Last Report:          4459 sec
    Crashes Since Last Report:           7
    Per-App Interval Since Last Report:  662 sec
    Per-App Crashes Since Last Report:   7
    Anonymous UUID:                      F62418E0-AB73-CD7D-E333-5D76851E5671
    Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Application Specific Information:
    *** Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '*** -[__NSArrayM insertObject:atIndex:]: object cannot be nil'
    Application Specific Backtrace 1:
    0   CoreFoundation                      0x91a5fe8b __raiseError + 219
    1   libobjc.A.dylib                     0x914ae52e objc_exception_throw + 230
    2   CoreFoundation                      0x9196b07b -[__NSArrayM insertObject:atIndex:] + 299
    3   CoreFoundation                      0x9196af40 -[__NSArrayM addObject:] + 64
    4   iPhoto                              0x000a0858 iPhoto + 256088
    5   iPhoto                              0x00387d0c iPhoto + 3300620
    6   iPhoto                              0x0029765c iPhoto + 2315868
    7   libdispatch.dylib                   0x95dfccb1 _dispatch_barrier_sync_f_slow_invoke + 80
    8   libdispatch.dylib                   0x95df6c82 _dispatch_client_callout + 46
    9   libdispatch.dylib                   0x95dfc2e3 _dispatch_main_queue_callback_4CF + 223
    10  CoreFoundation                      0x9195bc29 __CFRunLoopRun + 1961
    11  CoreFoundation                      0x9195b01a CFRunLoopRunSpecific + 378
    12  CoreFoundation                      0x9195ae8b CFRunLoopRunInMode + 123
    13  HIToolbox                           0x995dff5a RunCurrentEventLoopInMode + 242
    14  HIToolbox                           0x995dfbf5 ReceiveNextEventCommon + 162
    15  HIToolbox                           0x995dfb44 BlockUntilNextEventMatchingListInMode + 88
    16  AppKit                              0x98b2e93a _DPSNextEvent + 724
    17  AppKit                              0x98b2e16c -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 119
    18  AppKit                              0x98b245cc -[NSApplication run] + 855
    19  AppKit                              0x98ac75f6 NSApplicationMain + 1053
    20  iPhoto                              0x000720b9 iPhoto + 65721
    21  iPhoto                              0x00071705 iPhoto + 63237
    22  ???                                 0x00000002 0x0 + 2
    Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
    0   com.apple.CoreFoundation                0x91a606a7 ___TERMINATING_DUE_TO_UNCAUGHT_EXCEPTION___ + 7
    1   libobjc.A.dylib                         0x914ae52e objc_exception_throw + 230
    2   com.apple.CoreFoundation                0x9196b07b -[__NSArrayM insertObject:atIndex:] + 299
    3   com.apple.CoreFoundation                0x9196af40 -[__NSArrayM addObject:] + 64
    4   com.apple.iPhoto                        0x000a0858 0x62000 + 256088
    5   com.apple.iPhoto                        0x00387d0c 0x62000 + 3300620
    6   com.apple.iPhoto                        0x0029765c 0x62000 + 2315868
    7   libdispatch.dylib                       0x95dfccb1 _dispatch_barrier_sync_f_slow_invoke + 80
    8   libdispatch.dylib                       0x95df6c82 _dispatch_client_callout + 46
    9   libdispatch.dylib                       0x95dfc2e3 _dispatch_main_queue_callback_4CF + 223
    10  com.apple.CoreFoundation                0x9195bc29 __CFRunLoopRun + 1961
    11  com.apple.CoreFoundation                0x9195b01a CFRunLoopRunSpecific + 378
    12  com.apple.CoreFoundation                0x9195ae8b CFRunLoopRunInMode + 123
    13  com.apple.HIToolbox                     0x995dff5a RunCurrentEventLoopInMode + 242
    14  com.apple.HIToolbox                     0x995dfbf5 ReceiveNextEventCommon + 162
    15  com.apple.HIToolbox                     0x995dfb44 BlockUntilNextEventMatchingListInMode + 88
    16  com.apple.AppKit                        0x98b2e93a _DPSNextEvent + 724
    17  com.apple.AppKit                        0x98b2e16c -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 119
    18  com.apple.AppKit                        0x98b245cc -[NSApplication run] + 855
    19  com.apple.AppKit                        0x98ac75f6 NSApplicationMain + 1053
    20  com.apple.iPhoto                        0x000720b9 0x62000 + 65721
    21  com.apple.iPhoto                        0x00071705 0x62000 + 63237
    Thread 1:: Dispatch queue: com.apple.libdispatch-manager
    0   libsystem_kernel.dylib                  0x908819ae kevent + 10
    1   libdispatch.dylib                       0x95df9c71 _dispatch_mgr_invoke + 993
    2   libdispatch.dylib                       0x95df97a9 _dispatch_mgr_thread + 53
    Thread 2:
    0   libsystem_kernel.dylib                  0x908810ee __workq_kernreturn + 10
    1   libsystem_c.dylib                       0x934f70ac _pthread_workq_return + 45
    2   libsystem_c.dylib                       0x934f6e79 _pthread_wqthread + 448
    3   libsystem_c.dylib                       0x934dedaa start_wqthread + 30

  • Unable to open solution in Solution Manager - SM:EXEC SERVICES

    Hello Experts!!
    We have Solution Manager 3.2 SR1 on Solaris 10
    We have confiured EWA report to be generated every week through the solution manager. The session data although gets generated for the service created in Solution manager but we are unable to download the EWA report as the automatic job SM:EXEC SERVICES fails with the job log as
    Unable to open solution Test. (where the solution name  is Test).
    Message no. DSWP017
    When the service processing is started explicitly it runs accordingly. Could you please let me know whether it is an authorisation issue or something else?
    Thanks and Regards,
    Karan Shah

    Take a look at the following notes that desribe the reason and
    the solution for this issue:
    SAP Note 525097 - Programs cannot be generated, SYNTAX_ERROR,
                      SM:EXEC SERVICES
    SAP Note 611536 - Generation error in reports
                      (name pattern RDSVAS____00*)
    SAP Note 727998 - Complete Replacement of Service Definitions
                      for SDCC/SDCCN
    After applying the above Note SM:EXEC SERVICE background job
    should run correctly again.
    Please, first refresh the service definitions on the satelite system
    and then, if the problem persists, on the Solution Manager system.

  • Unable to use SSL between Access Manager and Directory Server

    I am trying to set up Access Manager to use SSL when communicating with Directory Server. Access Manager 7 is running under Sun Web Server 6.1. I have configured Directory Server to use SSL using a Self-Signed CA and have imported the CA certificate into the certificate database for Web Server. When I change the Access Manager configuration as specified in the Admin Guide to use SSL and restart the Web Server, Access Manager fails with the message
    (among many others)
    netscape.ldap.LDAPException: SSL connection to
    eauth1.arc.nasa.gov:636, SSL_ForceHandshake failed: (-8157) Certificate extension not found. (91); Cannot
    connect to the LDAP server
    I am able to connect to the Directory Server instanc with JXplorer using SSL (with a complaint about an unknown CA). Can someone explain the error message so that I can fix the problem or work around it?
    Thanks

    in the initial part of AMConfig.properties, you'll find an entry similar to trustSSLCerts . This, by default, is set to false. Trying setting it to true (AM web server instance will need a restart). This lets AM continue with SSL handshaking inspite of errors. Am not sure if this affects AM to DS connectivity as well. It sure affects AM to AM communication (in a multiple server configuration).
    Naturally, it is not recommended that you use this feature when you are ready for production, but atleast it'll let you be sure that apart from the cert issue, everything else is okay.
    Hope this helps.

  • Master unable to open database

    I am trying to run a replicated Berkeley DB instance and while the environment is created successfully and the master is elected, when the master attempts to open the database it returns an ENOENT. According the the documentation (and replication guide) this type of error occurs upon open when a replica attempts to open the database when it has not been created yet. While this makes sense for the replica, it doesn't seem like the master should ever return this error, particularly since the master has the DB_CREATE flag set. It is unclear to my why it is that the master replica is unable to open the database, does anyone know why this is occurring?
    Here is the relevant code:
    try
    u_int32_t envFlags;
    // First initialize the database enviroment information
    envFlags = DB_CREATE | // If the environment does not exist, create it.
    DB_RECOVER | // Run normal recovery
    DB_INIT_LOCK | // Initialize locking
    DB_INIT_LOG | // Initialize logging
    DB_INIT_MPOOL | // Initialize the cache
    DB_INIT_TXN | // Initialize transactions
    DB_INIT_REP | // Initialize replication
    DB_THREAD; // free-threaded (thread-safe)
    env_->set_errfile(stderr);
    //Sets verbose output to make replication easier to debug
    env_->set_verbose(DB_VERB_REPLICATION, 1);
    //Configure the local server
    env_->repmgr_set_local_site(local_.ip.c_str(), local_.port, 0);
    env_->repmgr_add_remote_site(replica.ip.c_str(), replica.port, NULL, 0);
    env_->rep_set_nsites(2);
    //If a role is specified then set the databases priority accordingly.
    switch ( r )
    case MASTER:
    env_->rep_set_priority(500);
    cerr << "Master Priority" << endl;
    break;
    case SLAVE:
    env_->rep_set_priority(50);
    cerr << "Slave Priority" << endl;
    break;
    case UNKNOWN:
    default:
    env_->rep_set_priority(5);
    cerr << "Unkown Priority" << endl;
    break;
    env_->set_app_private(&status);
    env_->set_event_notify(callback_handler);
    env_->repmgr_set_ack_policy(DB_REPMGR_ACKS_ONE);
    env_->set_timeout(1000000, DB_SET_TXN_TIMEOUT);
    env_->set_tx_max(10000);
    env_->set_lk_detect(DB_LOCK_MINWRITE);
    env_->open(path.c_str(), envFlags, 0);
    env_->repmgr_start(3, DB_REP_ELECTION);
    sleep(5);
    db_ = new Db(env_, 0);
    u_int32_t dbFlags = 0;
    bool isOpen = false;
    while(!isOpen)
    dbFlags = DB_AUTO_COMMIT;
    if( status.role == MASTER )
    cout << "Setting DB_CREATE Flag " << endl;
    dbFlags |= DB_CREATE;
    if( db_ == NULL )
    db_ = new Db(env_, 0);
    db_->set_error_stream(&std::cerr);
    cerr << "Attempting to open db" << endl;
    try
    db_->open(NULL, dbFileName_.c_str(), NULL, DB_BTREE, dbFlags, 0);
    cerr << "DB Opened successfully" << endl;
    isOpen = true;
    break;
    catch(DbException dbe)
    /* It is expected that this condition will be triggered
    * when client sites start up.
    * It can take a while for the master site to be found
    * and synced, and no DB will be available until then.
    if (dbe.get_errno() == ENOENT) {
    cerr << status.id << " DB not available yet, retrying." << endl;
    db_->close(0);
    db_ = NULL;
    } else {
    env_->err(dbe.get_errno(), "DB->open");
    throw dbe;
    sleep(5);
    // DbException is not a subclass of std::exception, so we
    // need to catch them both.
    catch(DbException &e)
    std::cerr << "Error opening database: " << dbFileName_ << "\n";
    std::cerr << e.what() << std::endl;
    catch(std::exception &e)
    std::cerr << "Error opening database: " << dbFileName_ << "\n";
    std::cerr << e.what() << std::endl;
    I am running this code with verbose replication output on a local machine. I start a single client on port 9090 and add a replica on port 9091 (the replica does not start since the first client does not return). I have tried cleaning out the folder where is db is written to and it makes no difference. I have provided some /* comments */ to augment what is being output.
    REP_UNDEF: EID 0 is assigned for site localhost:9091
    9090 Master Priority
    REP_UNDEF: Read in gen 9
    REP_UNDEF: Read in egen 9
    REP_UNDEF: rep_start: Found old version log 14
    CLIENT: dbs/ rep_send_message: msgv = 5 logv 14 gen = 9 eid -1, type newclient, LSN [0][0] nogroup nobuf
    event: DB_EVENT_REP_CLIENT, I am now a replication client
    CLIENT: starting election thread
    CLIENT: elect thread to do: 0
    CLIENT: repmgr elect: opcode 0, finished 0, master -2
    CLIENT: init connection to site localhost:9091 with result 115
    connecting to site localhost:9091: Connection refused
    Done sleeping, trying to open dbs
    /* Environment has been opened, now the client will try to open the database */
    Attempting to open db
    DB not available yet, retrying.
    /* Open fails since it is a client and there is no master to create the database yet */
    CLIENT: elect thread to do: 1
    DB_ENV->rep_elect:WARNING: nvotes (1) is sub-majority with nsites (2)
    DB_ENV->rep_elect:WARNING: nvotes (1) is sub-majority with nsites (2)
    CLIENT: Start election nsites 2, ack 1, priority 500
    Attempting to open db
    CLIENT: Tallying VOTE1[0] (2147483647, 9)
    CLIENT: Beginning an election
    CLIENT: dbs/ rep_send_message: msgv = 5 logv 14 gen = 9 eid -1, type vote1, LSN [1][5174] nogroup nobuf
    DB not available yet, retrying.
    CLIENT: Tallying VOTE2[0] (2147483647, 9)
    CLIENT: Counted my vote 1
    CLIENT: Skipping phase2 wait: already got 1 votes
    CLIENT: Got enough votes to win; election done; winner is 2147483647, gen 9
    CLIENT: Election finished in 2.098189000 sec
    CLIENT: Election done; egen 10
    event: DB_EVENT_REP_ELECTED
    CLIENT: Ended election with 0, sites 0, egen 10, flags 0x200a01
    CLIENT: Election done; egen 10
    CLIENT: New master gen 10, egen 11
    CLIENT: Establishing group as master.
    MASTER: rep_start: Old log version was 14
    MASTER: dbs/ rep_send_message: msgv = 5 logv 14 gen = 10 eid -1, type newmaster, LSN [1][5174] nobuf
    MASTER: restore_prep: No prepares. Skip.
    MASTER: dbs/ rep_send_message: msgv = 5 logv 14 gen = 10 eid -1, type log, LSN [1][5174]
    event: DB_EVENT_REP_MASTER
    event: DB_EVENT_REP_MASTER
    MASTER: election thread is exiting
    /* Client gets elected to be the master, and thus can set the db create flag */
    Setting DB_CREATE Flag
    Attempting to open db
    MASTER: dbs/ rep_send_message: msgv = 5 logv 14 gen = 10 eid -1, type log, LSN [1][5210] flush
    DB not available yet, retrying.
    /* Master cannot open the database event though the db create flag is set, this is the issue */
    Setting DB_CREATE Flag
    Attempting to open db
    MASTER: dbs/ rep_send_message: msgv = 5 logv 14 gen = 10 eid -1, type log, LSN [1][5272] flush
    DB not available yet, retrying.
    /* repeated indefinitely */
    Can anyone help? Thank you.

    dbFileName is "./dbs/test.db" and the dbs folder exists. I tried putting 777 permissions on the folder as well as using " dbs/test.db" to no avail.
    I removed the database and all logs and ran it again for the same time as before and below is the db_printlog output:
    [1][28]__txn_recycle: rec: 14 txnp 0 prevlsn [0][0]
         min: 2147483648
         max: 4294967295
    [1][64]__fop_create: rec: 143 txnp 80000001 prevlsn [0][0]
         name: ./dbs/80000000.f1e7a7fc0
         appname: 1
         mode: 660
    [1][128]__fop_create: rec: 143 txnp 80000003 prevlsn [0][0]
         name: ./dbs/80000002.b856343a0
         appname: 1
         mode: 660
    [1][192]__fop_create: rec: 143 txnp 80000005 prevlsn [0][0]
         name: ./dbs/80000004.f447bb460
         appname: 1
         mode: 660
    [1][256]__fop_create: rec: 143 txnp 80000007 prevlsn [0][0]
         name: ./dbs/80000006.d66a33830
         appname: 1
         mode: 660
    [1][320]__fop_create: rec: 143 txnp 80000009 prevlsn [0][0]
         name: ./dbs/80000008.d59895bb0
         appname: 1
         mode: 660

  • Unable to open database in READ ONLY mode

    When trying to open database in READ ONLY MODE it says needs recovery. How ever database opens succesfully in READ WRITE MODE.
    1) Startup mount
    2) SQL> ALTER DATABASE OPEN READ ONLY;
    ALTER DATABASE OPEN READ ONLY
    ERROR at line 1:
    ORA-16005: database requires recovery
    But database opens succesfully when opened in READ WRITE mode.

    user12038051 wrote:
    When trying to open database in READ ONLY MODE it says needs recovery. How ever database opens succesfully in READ WRITE MODE.
    1) Startup mount
    2) SQL> ALTER DATABASE OPEN READ ONLY;
    ALTER DATABASE OPEN READ ONLY
    ERROR at line 1:
    ORA-16005: database requires recovery
    But database opens succesfully when opened in READ WRITE mode.
    sqlplus '/as sysdba'
    shutdown imediate;
    startup;
    shutdown imediate;
    startup mount;
    recover database;
    alter database open read only;

  • Oracle 10G Express:Unable To open DataBase Home Page

    I am not able to open Database Home page.
    http://127.0.0.1:8040/apex
    I verified the below steps:
    1.OracleListener and Service are starting up fine.
    C:\oraclexe\app\oracle\product\10.2.0\server\BIN>net start OracleXETNSListener
    The OracleXETNSListener service is starting.
    The OracleXETNSListener service was started successfully.
    C:\oraclexe\app\oracle\product\10.2.0\server\BIN>net start OracleServiceXE
    The OracleServiceXE service is starting.......
    The OracleServiceXE service was started successfully.
    2. netsat output - local host listening to port 8040
    C:\oraclexe\app\oracle\product\10.2.0\server\BIN>netstat -an | find "8040"
    TCP 127.0.0.1:8040 0.0.0.0:0 LISTENING
    3. Http port in database
    C:\oraclexe\app\oracle\product\10.2.0\server\BIN>sqlplus
    SQL*Plus: Release 10.2.0.1.0 - Production on Sun Aug 20 18:11:13 2006
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    Enter user-name: system
    Enter password:
    Connected to:
    Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
    SQL> select dbms_xdb.gethttpport() from dual;
    DBMS_XDB.GETHTTPPORT()
    8040
    SQL>
    4. Disabled Personal Firewall before starting the Service and Listener
    5. listener.ora
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 8040))
    DEFAULT_SERVICE_LISTENER = (XE)
    CONNECT_TIMEOUT_LISTENER=10
    6.tnsnames.ora
    XE =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 8040))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = XE)
    7. Listener log when i try to open the database home page.
    Started with pid=180
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=8040)))
    Listener completed notification to CRS on start
    TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
    20-AUG-2006 17:28:23 * 12502
    TNS-12502: TNS:listener received no CONNECT_DATA from client
    20-AUG-2006 17:30:34 * 12502
    TNS-12502: TNS:listener received no CONNECT_DATA from client
    Can someone help me how to get to the home page.

    What does your lsnrctl status give you?

  • Unable to see options in access manager.!!!

    Hey Geeks,
    I am not sure what changes but I do not see 'users","roles" ,"services" on the access manager console under view dropdown.
    has somebody faced this kinda issue.?
    I was able to see all the options earlier and I havent changed anything.Although I did try to modify a users profile in the LDAP directory through ldap browser.
    When I check "display options" for my organization all options are specified.I have no clue why I am not able to see all option for my org.
    any pointers?
    Regards

    Guys,
    I had to re-install the whole Suite to get rid of the problem.Please update me If there is any solution to this.!!!
    Thanks in advance!
    Deepak.

  • Unable to Open Project Site Access Denied Issue (Project Manager)

    Hi 
    We got an issue that one project manager is having 12 projects, in that she can able to view 5 projects-- project sites but remaining 7 projects --- she is not able to open the project site (access denied) error is throwing when she try to open.
    She is the project manager of the 12 projects and having project manager permissions on the project sites.
    Please suggest any solution for this.
    Geeth If you feel that the answer which i gave you is Helpful please select it as Answer/helpful.

    I believe I've found the fix for this issue.  After opening a ticket with MS support and not getting anywhere with this issue I decided to do an in-depth review of all the Project and SharePoint 2013 CU's starting with December 2013 to September 2014. 
    To my amazement buried inside the July 2014 CU was a hotfix for this issue described almost word for word. (I will list all the relevant KB's at the end)  I contacted my support engineer inquiring about this hotfix and he stated it wasn't relevant because
    the "Synchronize Project Web App permissions to Project Site" was not failing or even generating any warnings in our Prod or Test environments.  I stated that is not always an indicator as ULS doesn't always catch all relevant errors.
    I informed him that I also found a second hotfix pertaining to the same issue released August 2014, apparently the first hotfix in July didn't totally resolve the issue and a second hotfix was released.  He was adamant that this would not resolve
    our issue and he requested or production databases because he was unable to replicate the issue in his test environment.  The reason, you may wonder, is because he was at a higher patch level that our farm.... Obviously!  His farm had the most current
    CU which included the hotfixes from July and August.  Apparently he didn't see the flaw in his logic.
    I decided to install the September CU on our test farm. Low and behold that fixed the problem, even though MS support stated the hotfix was not relevant to our issue.  I learned a long time ago to take MS support comments as suggestions instead
    of gospel truth, this isn't the first time they have confidently given me erroneous information.
    We are currently doing further testing to verify that this CU didn't break something else.  Unfortunately these rollups are not GA and Microsoft is very clear that you should only install them if the hotfixes pertain directly to your issue.
    Finding the hotfixes was a chore as Microsoft loves to create multiple KB's for the same thing and then nest (bury) them so you have to dig through four or five KB's to find the relevant fix.  I'll save you the trouble and list them below.
    Watch the
    September CU Webcast Brian Smith and team go into depth explaining why this issue has been happening and how they fixed it.
    September 2014 CU http://support.microsoft.com/kb/2882990 (the one I installed)
    August 2014 CU https://support.microsoft.com/kb/2989078
    August Project site sync hotfix
    https://support2.microsoft.com/kb/2883083
    July 2014 CU http://support.microsoft.com/kb/2882990
    July Project Site Sync hotfix http://support2.microsoft.com/kb/2882995
    Microsoft Project Server Blog
    http://blogs.technet.com/b/projectsupport/  (I find this to be more helpful than the TechNet site)
    Frank Miranda Florida Hospital MIS

  • Unable to Open Project Site Access Denied Issue Project 2013

    This issue is happening to select projects and select project managers, they can view certain project sites but receive the error on other projects.  After some extensive testing
    it looks like if the PM is the owner of the project plan they are not getting added to any of the synced groups for the project site.  I can change the project owner to any another PM and it processes correctly and adds them to the PM synced group on
    the Project site.  As soon as I make the original PM the Project plan owner again the previous PM gets removed from the PM synced group and added to the Team member synced group, the way its supposed to work.  However the PM with the problem never
    gets added to any group.  I have to manually add them to the non-synced Owner group on the project site so they don't get removed from the synced PM group the next time the sync runs at midnight.
    As I stated it is happening on select project plans and select PMs.  I have tried replublishing the project plan via Project professional and the web and the results are the same. 
    If I create a new project plan and assign one of the PMs with the issue to the plan everything works correctly.  We noticed the issue a few weeks ago; most of the plans with the issue are several months to a year old so they were working correctly until
    recently.  They had also made PM owner changes prior to the issue on most of those plans and everything worked correctly.
    If anyone is experiencing this issue and has a fix please let me know.  I am trying not to open an MS support ticket if possible.
    Frank Miranda Florida Hospital MIS

    I believe I've found the fix for this issue.  After opening a ticket with MS support and not getting anywhere with this issue I decided to do an in-depth review of all the Project and SharePoint 2013 CU's starting with December 2013 to September 2014. 
    To my amazement buried inside the July 2014 CU was a hotfix for this issue described almost word for word. (I will list all the relevant KB's at the end)  I contacted my support engineer inquiring about this hotfix and he stated it wasn't relevant because
    the "Synchronize Project Web App permissions to Project Site" was not failing or even generating any warnings in our Prod or Test environments.  I stated that is not always an indicator as ULS doesn't always catch all relevant errors.
    I informed him that I also found a second hotfix pertaining to the same issue released August 2014, apparently the first hotfix in July didn't totally resolve the issue and a second hotfix was released.  He was adamant that this would not resolve
    our issue and he requested or production databases because he was unable to replicate the issue in his test environment.  The reason, you may wonder, is because he was at a higher patch level that our farm.... Obviously!  His farm had the most current
    CU which included the hotfixes from July and August.  Apparently he didn't see the flaw in his logic.
    I decided to install the September CU on our test farm. Low and behold that fixed the problem, even though MS support stated the hotfix was not relevant to our issue.  I learned a long time ago to take MS support comments as suggestions instead
    of gospel truth, this isn't the first time they have confidently given me erroneous information.
    We are currently doing further testing to verify that this CU didn't break something else.  Unfortunately these rollups are not GA and Microsoft is very clear that you should only install them if the hotfixes pertain directly to your issue.
    Finding the hotfixes was a chore as Microsoft loves to create multiple KB's for the same thing and then nest (bury) them so you have to dig through four or five KB's to find the relevant fix.  I'll save you the trouble and list them below.
    Watch the
    September CU Webcast Brian Smith and team go into depth explaining why this issue has been happening and how they fixed it.
    September 2014 CU http://support.microsoft.com/kb/2882990 (the one I installed)
    August 2014 CU https://support.microsoft.com/kb/2989078
    August Project site sync hotfix
    https://support2.microsoft.com/kb/2883083
    July 2014 CU http://support.microsoft.com/kb/2882990
    July Project Site Sync hotfix http://support2.microsoft.com/kb/2882995
    Microsoft Project Server Blog
    http://blogs.technet.com/b/projectsupport/  (I find this to be more helpful than the TechNet site)
    Frank Miranda Florida Hospital MIS

  • Unable to open database connection after applicaiton is running for several days.

    Has anyone experienced a similar error to this:
    After about 3 days of use our application starts to report errors opening
    the database connection. By that time we've had thousands of transactions
    happen. Oracle is only showing a few open connections to our iAS host so
    the error seems to indicate the connection pool. I'm configured for 64
    connections (the default). We are using the Oracle native driver on iAS
    SP3, Solaris.
    The iAS ksvradmin monitor gives errors when trying to see how many open
    connections it has (verified bug in SP3), so I can't get any info from iAS
    on the connection pool.
    Thanks in advance,
    Rodger Ball
    Sr. Engineer
    Business Wire

    iAS6 SP3 and earlier cannot detect dead connections. If connections become
    stale, iAS does not detect this and will hand out these stale connections.
    I don't know enough about your problem, but you can check for this.
    hope this helps,
    -James
    "Rodger Ball" <[email protected]> wrote in message
    news:9suucb$[email protected]..
    Has anyone experienced a similar error to this:
    After about 3 days of use our application starts to report errors opening
    the database connection. By that time we've had thousands of transactions
    happen. Oracle is only showing a few open connections to our iAS host so
    the error seems to indicate the connection pool. I'm configured for 64
    connections (the default). We are using the Oracle native driver on iAS
    SP3, Solaris.
    The iAS ksvradmin monitor gives errors when trying to see how many open
    connections it has (verified bug in SP3), so I can't get any info from iAS
    on the connection pool.
    Thanks in advance,
    Rodger Ball
    Sr. Engineer
    Business Wire

Maybe you are looking for

  • Show in Answers date of end aggregation made in an essbase  ASOcube....

    Hallo all, maybe somebody has desided a problem i have: i need to show in a report, made in Answers Oracle BI EE for a multidimensional essbase ASO cube, a date of end last aggregation in a cube. I dont have any idea about possibilities: firstly get

  • PPT on SD process flow

    Hi guys am in need of help from u am not so clear about the SD process flow can anyone pls send me a PPT on SD process flow to my email id:- (<REMOVED BY MODERATOR>). thanking u in advance.. Regards Jino.

  • Cdm and partner profiles

    can help me out in,,,,,What are CDM and Partner Profiles in ALE??

  • Database Restoring (SQL 2008 R2)

    Hi I am trying to restore a database in SQL 2008 R2 and I am what I am getting instead is an error message that reads, "Too many backup devices specified for backup or restore; only 64 are allowed. RESTORE HEADERONLY is terminating abnormally. (Micro

  • Compatexport.cpp line 33 error

    upgraded to 6.1 and I am getting the error compatexport.cpp line 33. I have installed MS visual C++ but I am not sure how to fix the problem.... and I have tried...