Unable to open /dev/ticlts, /dev/ticots & /dev/ticotsord

Question

Hi!
I have a E420 here which suffered from a massively corrupt Root-FS(leaving her in an unbootable State) that i had to recover from Backup.
Now after I got the Machine to boot properly i have the Problem that certain Services wouldnt start. For example prngd or RPC.
prngd says something like this:
Could not create socket: Protocol not supported
Looking further into it I discovered that these Devices:
lrwxrwxrwx 1 root staff 29 Mar 14 16:07 /dev/ticlts -> ../devices/pseudo/tl@0:ticlts
lrwxrwxrwx 1 root staff 29 Mar 14 16:07 /dev/ticots -> ../devices/pseudo/tl@0:ticots
lrwxrwxrwx 1 root staff 32 Mar 14 16:07 /dev/ticotsord -> ../devices/pseudo/tl@0:ticotsord
aren't accesible. Neither the Links nor the physical ones. I tried rebooting with -r which creates now links but leaves the physical ones as they are.
<HOSTNAME>:/>cat /dev/tic*
cat: cannot open /dev/ticlts
cat: cannot open /dev/ticots
cat: cannot open /dev/ticotsord
Anyone have a Clue as how to fix this or what the cause of the Problem might be ?
regards
oliver

Answer 1

Hi Dev;
Can you let me know where I can find the type of ethernet used for my configuration.type ifconfig as root
I am able to access the EBS 11i application using http://localhost.localdomain:8000
The /etc/hosts file in my linux server has the below entry
[oracle@localhost ~]$ cat /etc/hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhostNormaly during installation you need to use new IP for your installation,your /etc/hosts entery should be like
127.0.0.1 localhost.localdomain localhost
10.x.x.x test.xx.com test (where test is localhost,xx.com is localdomain)
I am able to ping the IP (127.0.0.1)
Pinging 127.0.0.1 with 32 bytes of data:
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128please try to add below entery to your C:\WINDOWS\system32\drivers\etc\hosts file
127.0.0.1 localhost.localdomain
Then try to login your ebs from your client http://localhost.localdomain:8000
PS: I am not sure it will work, just try and see whathappen, as i mention normaly i always use new IP for installation. This is also mention in installation guide too
Regard
Helios