Unable to open Document in Webi Rich Client

Hi All,
I am facing problem when I try to open any webi report in WRC.
It shows "Loading document...." message every time I open a file regardless of the fact I import it from CMS or take it from local m/c.
Tried following steps given in SAP note but that didn't help.
UClear the Java plug-in cache :
Start -> settings -> control panel -> java
Under the General tab -> Temporary Internet Files, click Settings
Click Delete Files
It is working fine with other machine. I am using BO 3.1 Sp2 FP2.1.
The one thing I would like to mention was that few days back I tried installing FP2.6 but it failed in halfway so nothing got installed.
I checked in control panel it is still showing version Fp2.1.
Please let me know if anybody has faced the similar issue and found resolution for it.
Thanks,
Chandra

This seems to be machine specific hence can be a problem with .lsi file being corrupted
move the .lsi file from current location to some other and login again .. the .lsi file will be re-created. try opening report now

Similar Messages

Webi Rich client - unable to connect to BO 4.0 Server.

Hello All,
we have a same issue while connecting to a BO4.0 server.from WEBI Rich client .
We are able to connect to infoview from browser,and able to open WEBI from browser.
but when tried from WEBI Rich client, we get error : Logon failure due to an internal error.
We have updated the hosts file but did not help.
Please help.
Thanks and regards,
Vinay

What happens if you change your preferences in BILaunch pad, so that the Webi Rich Client is launched when you Modify webi report ?
This way WRC will be launched in 3-tier mode and if succesfull this will indicate that WRC in 2-tier mode can't connect to CMS and FRS due to either Firewall or other problems.
Also, from WRC machine - can you connect using Designer or IDT ?

Connection error in Webi Rich Client Bobj 4.1 sp1

Hello Experts,
I am getting an error while connecting Bobj server(4.1 sp2) through Webi rich client (4.1 Sp1).
When i am trying to connect to CMC, i am able to connect it.
Please help on this.
Thanks in Advance
Bhasin

Hello Bhasin,
I have few questions ans steps for you.
1. Are you able to login into any other BO client tool?
2. Do you have multiple Network Cards [NICs] on BO Server box?
If YES, we need to prioritize it as below. Once donw bind primary IP with CMS. as mentioned below.
Change Network Binding Order:
Click Start, click Network, click Network and Sharing Center, and then click Change Adapter Settings.
Press the ALT key, click Advanced, and then click Advanced Settings. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
Click the Adapters and Bindings tab, and then, under Connections, click the connection you want to modify.
Under Bindings for <connection name>, select the protocol that you want to move up or down in the list, click the up or down arrow button, and then click OK.
Bind Primary IP with CMS:
Log onto Central Management Console (CMC).
Open Central Management Server (CMS) properties page, under
Host Identifiers: change from Auto assign to IP Address
Then input CMS server local IP address beside (IPv4).
Do this for each CMS.
Restart the CMS.
Good Luck
Regards,
Mahesh

Bank row was added in webi rich client when using excel as data provider

reproduding steps:
1.open webi rich client.
2.Create a new webi report,then select "local data source"
3.select an excel file as data source.
4.run query.
For example,there are 5rows in excel,but in webi report there are 6 rows,and the last row is bank which is added by webi.
question
1. mcro has been defined in the excel file,is there any impact by using macro?
2.I want to know why this happens,

>could you please test the following solution if you have multiple data providers in the report.
>We need to manually link the dimensions then in the resulting crosstab/table we are need to apply >filters and select only the values but not the #empty values.
I have only one data provider in the report.
And, I have do the following test,
test1:Delete the last row which is blank row of the excel file,refresh webi report, the last blank row is still there.
test2: press ALT+F8,delete marco in the excel file,refresh webi report, the last blank row is still there,then delete the last blank row in the excel file ,save excel file,refresh webi,the last blank row is disappear.

Web Rich Client Login

Hi,
I'm having problems accessing BO Web Intelligence Rich Client. Here is our setup:
- SAP BO 4.1 SP2
- Two SAP BW backends
- Authentication for the 2 BW backends configured, users and roles imported
- Two OLAP connections configured, one for each BW backend.
My problem is configuring access to our 2 backends from the WebI Rich Client. I cannot choose what backend system i want to login to.
Therefore, the system automatically logs in to one of the backends, and I cannot open objects belonging to the other backend.
What I want is something like BI Launch PAD:
It has input fields for SAP system, and therefore I can choose what backend I want to login.
I tried to deactivate the "Default System" authentication option, hoping that some popup asking for system info would show up:
CMC Home -> Authentication -> SAP -> Options
But no system popup appears, and login failed.
Any help?
Thanks

Your reply was indeed very helpful, and I've already configured my systems, and its working fine.
However its not completely what I wanted, because for one system there will be a generic backend authentication, not user specific. Maybe what I want is not possible.
I will wait to see if anyone can dig further into this, but I will definitely give points.
Thanks

Webi Rich Client on Windows 7 64 bit doesn't work

Hello,
on my server WINDOWS 2008 r2 64 BIT i have upgraded BO Edge XI 3.1 to SP3.
On a Windows 7 64 bit client i have installed Webi Rich Client from Infoview and the latest Java version.
I have 2 problems on this client:
1) From Infoview, When i try to modify a .wid file, Java control panel doesn't found a plug.in and stop to run.
Wich is the supported Java version?
2) Webi Rich Client, after login, doesn't open a .wid file and give me the error WIJ 2002.
Can anyone help me???
Thank's a lot
Daniela

Hi all,
thanks for your suggestions.
Unfortunately both errors still remain.
1) Web Intelligence Rich Client
I have installed BOE client tools using XI3.1 SP3 Client tools package in C:\Business Objects. The report's import runs well, but when i try to open one of the imported reports, i receive the error: WIJ 2002.
The details are:
Version:null Analisi dello stack: java.lang.RuntimeException: java.lang.RuntimeException: XML parser problem: XMLJaxpParser.parse(): Element type "ABOUT_Patentnumbers" must be followed by either attribute specifications, ">" or "/>". at com.businessobjects.wp.xml.jaxp.XMLJaxpParser.parse(Unknown Source) at com.businessobjects.webi.richclient.XMLviaOccaRC.getServerConfiguration(Unknown Source) at com.businessobjects.wp.xml.XMLServerConfiguration.load(Unknown Source) at com.businessobjects.wp.xml.XMLServerConfiguration.load(Unknown Source) at com.businessobjects.wp.tc.TCMain.initClient(Unknown Source) at com.businessobjects.wp.tc.thread.InitAppletRunner.run(Unknown Source) at java.lang.Thread.run(Unknown Source) at com.businessobjects.webi.richclient.XMLviaOccaRC.getServerConfiguration(Unknown Source) at com.businessobjects.wp.xml.XMLServerConfiguration.load(Unknown Source) at com.businessobjects.wp.xml.XMLServerConfiguration.load(Unknown Source) at com.businessobjects.wp.tc.TCMain.initClient(Unknown Source) at com.businessobjects.wp.tc.thread.InitAppletRunner.run(Unknown Source) at java.lang.Thread.run(Unknown Source)
2) Infoview
We have installed java 1.6.0_02 (we previously have Update 29).
We try to use Explorer 9.0.3 or Firefox 8.0
Any other suggestion???
Thanks

Installing Webi Rich Client on Windows 2000 PC

Hi all
I have a client who has Windows 2000 PC's and would like to install the webi rich client. I appreciate that this isn't one of the operating systems in the supported platforms document, however is there a way /workaround to install the webi rich client on a Windows 2000 PC?
Thank you for your help.
Kind regards,
Dean

Hi Dean,
Supported Operating System for BO XIR 3.1 and same is for Webi rich client:
Desktop Products
u2022
Windows XP SP2 Professional
u2022
Windows Vista (1)
u2022
Windows Vista SP1 (1)
u2022
Windows Server 2003 SP1 (1) (2)
u2022
Windows Server 2003 SP2 (1) (2)
u2022
Windows Server 2003 R2 (1) (2)
u2022
Windows Server 2008 (1) (2)
(1)
32-bit and 64-bit O/S editions supported
(2)
Data Center Edition, Enterprise Edition, Standard Edition , Web Edition
Server Products
u2022
Windows Server 2003 SP1 (1) (2)
u2022
Windows Server 2003 SP2 (1) (2)
u2022
Windows Server 2003 R2 (1) (2)
u2022
Windows Server 2008 (1) (2)
(1)
32-bit and 64-bit O/S editions supported
(2)
Data Center Edition, Enterprise Edition, Standard Edition , Web Edition
BusinessObjects and Microsoft Critical Patches
BusinessObjects supports the install of all Microsoft critical patches for
Hope this helps you.
Regards,
Deepti Bajpai

Unable to open reports with Web intelligence

Hi there,
We are unable to open reports using Webi Intelligence. Error of "Session is closed(Error: INF)" apears.
I have restarted the SIA and Apache services with no luck.
Version : Business Objects XI3, Edge Series professional
Kind regards,

Try changing the idle connection timeout on your Web Intelligence Processing Server to 60 minutes (from the CMC).
If this doesn't work, please add a trace to the Web Intelligence Processing Server (add a -trace to the command line parameters of the server). and post the log for the relevant time period.

BO XI 3.1 SP3 SSO with CMC and Webi Rich Client

Hello,
Is it possible in BO XI 3.1 SP3 to use SSO with CMC and Webi Rich Client ?
It works fine with InfoView, Designer and Desktop Intelligence.
Regards

Hi,
What kind of SSO authentication are you trying to set up? (AD, LDAP,...)
I think it's AD regarding your command line.
But be aware that in SSO, you don't need to configure the command line to run the client.
Have a look at the following guide.
[Configuring Manual Kerberos Authentication and-or SSO in Distributed Environments with XI 3.1 SP3.pdf|https://bosap-support.wdf.sap.corp/sap/support/sapnotes/public/services/attachment.htm?iv_key=002007204200000183782010&iv_version=0005&alt=2BCE4CB10DF674B172F4F3F7B32A284F49333135358877720E883731B332AF34CACD2AB52C0A2C8DCACA09084EF4CB494E4E0F2ECE8E2F89772908C9CE70CD2DF77675F7F2D1750C09514BCECFCFCE4C8DCF4BCC4DB5F575F4F4F3F57771F571F6F70B01B25D83D4120B0A722092A599504EB16D715E3E00&iv_guid=DF838310BFAAE8F1B486001A64C54696]
Regarding accessing CMC with SSO, it's not recomended at all as if you break this access, than you can't connect anymore to the CMC and modify settings.
Regards,
Philippe
Edited by: Philippe Tavares on Feb 15, 2011 4:11 PM

Unable to open document. Please check to see if you have read permission for the above file.

System:
Adobe Acrobat X Pro, 10.1.2
Windows 7 Enterprise, 32-bit
Quad Core badass CPU
4GB RAM
MS Word 2010 (Office 2010)
I installed the latest version as Administrator and am running as Administrator. I have all rights to all files on the PC.
When I attempt to create a PDF from any Word document, whether .DOC or .DOCX, I get an error window every time:
"Unable to open document:"
"[document location]"
"Please check to see if you have read permission for the above file."
This happens after the little notice pops up "Starting the application which created the document...."
If I open Word and create PDF from the ribbon, it works. It still won't allow me to create from Acrobat.
It creates PDFs from Excel files but not DOC files. I've searched for solutions but found none. I did find this from July of 2011:
"I have found out from Adobe technical support that this is a known issue with Office 2010 SP1 installed. This is an FYI for anyone else experiencing this issue, remove SP1 and it will work ok. They said an update to correct this issue will be coming within the next quarter."
I have updated to the latest version 10.1.2 and still have this problem.
This is a major issue, because it also fails on batch conversions, which is what I really need for the 100 or so documents that need to be PDFed. I'm not going to open each individual file and save each one from within Word.
This is a KNOWN ISSUE at Adobe, and if you look through the forums you'll find many people having this problem, and so far, I have not seen any solution.
If anyone has found the solution, please post it here.
Thanks!
B

I think I found a solution. It seems to be relatet to normal.dotm.
In our environment we have upgraded from XP & Office 2003 to Win7 and Office 2010. Normal.dot is stored on the users home share. When Office 2010 is started for the first time (for a user) it takes some of the old stuff from normal.dot and puts it in the new normal.dotm. When this happens, we get this error in Acrobat X.
The solution is to rename both normal.dot and notmal.dot to e.g. normal.dot.old and normal.dotm.old. Office/Word 2010 will then create a new, "clean" normal.dotm.
(By the way, if you are in a corporate environment, you might have changed the default path to normal.dot in Office group policies. You can see it here: HKEY_CURRENT_USER\Software\Policies\Microsoft\office\14.0\common\general\usertemplates)
I would be interested in knowing exactly why/what in normal.dotm caused this error. I can provide you (Adobe) with a faulty normal.dot(m), if you're interested.

Unable to open documents because of missing plug ins

I am unable to open documents in CS3 (version 5.04)
I am getting a message:"Missing Plug Ins: Conditional Text.InDesignPlugIn, WorldReady.InDesignPlugin.
The document "xxxxx.indd" uses one or more plug-ins which are not currently available on your system. Do you want to open anyway?"
If I click on OK I get another window, stating "Cannot Open File", a list of all kind of missing Plugins and the message "Cannot open "xxxxx.indd". Please upgrade your plug-ins to their latest versions, or upgrade to the latest version of Adobe InDesign.
I don't want to switch to CS4 and as far as I know version 5.04 of CS3 is the latest.
Any ideas of what I could do to get the latest PlugINs or anything else that would help?
Thank you!
Anne

Probably, but it's 100% not necessary when going from CS4 to CS3. It might be a case of 'half read, then half-understood'.
As this is a really frequent question and there are still no sticky posts: anyone up for a "feature request" that makes InDesign check the version number before opening? (Of course that wouldn't work backwards to CS3. Still, it'd avoid these kind of posts when CS6 comes out. Note: not CS5, because that would have no problems opening CS4, but CS4 would have problems with Cs5! Oh, for planning ahead ... )

Unable to open documents in InDesign CC

Have been using CC for over a year. Suddenly I am unable to open documents I created InDesign CC (as recently as last week).
I updated O/S to Mavericks at the weekend.
This is a HUGE problem! Any ideas how to fix?

Please let me know if I can provide any more information.
Help > System Info
What have you done for general trouble-shooting so far?
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html

Change the Default Page Size for WebI Rich Client 4.0

Hi:
I am trying to change the default paper size for Webi Rich Client 4.0.
In 3.x you made the changes to the defaultconfig.xml located in the path C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\classes\AppletConfig.
In 4.0 I canu2019t seem to locate the file, can you advise if the file is the same name and where the file located.
Thanks
Brad

Hi,
Please check out the User Guide - see section Web Intelligence Cascading Style Sheets (CSS)
http://help.sap.com/businessobject/product_guides/boexir4/en/xi4_ia_en.pdf
Regards
H

Attachment list - Unable to open document

Hi all,
I archive TIF image of Account Payable documents via the BAPI Archiv_Create_Synchron_Meta which create attachments to the SAP documents.
When I go to the transaction code FB03, I open one of my documents and, in "Attachment list", I find my archive in the attachments.
But, when I double-click on it, an error message appears and says: "UNABLE TO OPEN DOCUMENT".
BUT I have also tried to attach DOC, XLS, PDF and I CAN open it easily!
I have one entry for each doc type in transaction OAC0.
What's the matter ?
Thanks for your help.
Yohan

In firefox go to Tools>Options>Applications. Find Portable document format (PDF), click the drop-down next to it and choose "Use Adobe Reader.

Report Developed in Webi Rich Client Consuming more time in Data Retrieval

Dear All,
I am a BO Consultant, recently in my project I have developed one report in Webi Rich Client., at the time of development and subsequent days the report was working fine (taking Data Retrieval time less than 1 minute), but after some days its taking much time (increasing day by day and now its taking more than 11 minutes).
Can anybody point out what could be the reason?????
We are using,
1. SAP BI 7.0
2. SAP BO XI 3.1 Edge
3. Webi Rich Client Version :12.3.0 and Build 601
This report is made on a Multiprovider (Sales).
What are the important points that should be considered so that we can improve the performance of Webi Reports????
Waiting for a suitable solution.....................
Regards,
Arun Krishnan.G
SAP BO Consultant
Edited by: ArunKG on Oct 11, 2011 3:50 PM

Hi,
Please come back here with a copy/paste of the 2 MDX statements from the MDA.log to compare the good/bad runtimes.
& the 2 equivalent DPCOMMANDS clauses (good and bad) from the WebI trace logs.
Can u explain what u really mean in the bold text above..................Actually I didn't get you..........
Pardon, I have only 3 months experience in BO.
Regards,
Arun
Edited by: ArunKG on Oct 11, 2011 4:28 PM

Unable to open Document in Webi Rich Client

Similar Messages

Maybe you are looking for