Unable to open event

i have an event with lots of projects on an external drive which fcpx 10.0.4 refuses to open.
the size of the event is about 800 gb, digitalized vhs-tapes, the work of the last weeks…
when i doubleclick it, fcpx opens it at first, but when the startup window comes to "loading compressor support" i can watch the spinning wheel of death and fcpx hangs up, i have to shut it down.
when i open fcpx via the program-icon, it opens but doesn't show the external drive with my project. it is still on my desktop, when i try to open the event by doubleklicking it - with fcpx open - fcpx says "event cannot be opened". the same with the event in the backup-folder and in the "old versions"-folder.
i made a copy of the external drive (1 tb) and tried the same with the new one, same issue, cannot open event.
one external drive is fw 800, the other usb.
i made a few restarts, i repaired permissions, i deleted preferences (both fcpx and compressor), i used onyx, i reset the power manager, i deleted the last project i made in the event as this may have caused the trobles, still the same.
the work of the last weeks is in danger, i'm worried to lose the projec, any idea is appreciated.
thank you,
wolfgang

hi,
maybe its getting lost in translation, but I'm not understanding quite what you are saying. You say uyou have Projects in an Event? Projects and Events will always be in separate folders and shoukdnt be together.
You cannot open an event or project by double clicking its icon. Rather you boot fcpx by clicking the applicaiton icon. When its opening the application then looks at all your hard drives and looks for the folders 'Final Cut Events" and for Final Cut Projects'. These must be at the root level of your drives ( or in your Movies Folder on the drive where your User account is) or it wont find them.
There have been some other reports here of events and projects not loading on drives that have folders called "video". There might be some other things that cuase it to hang. If you can move all other folders on your external drive into something else just temporarily, and make sure Final Cut Events and Final Cut Projects are visible. Then boot fcpx and see what happens
adam

Similar Messages

Many years ago synced iCal with Microsoft program. Since installing Lion whenever I try to create an event in iCal it flashes up message "Unable to open Microsoft sync services Power PC applications no longer supported." How do I get rid of message?

Many years ago synced iCal with Microsoft program. Since installing Lion whenever I try to create an event in iCal it flashes up message "Unable to open Microsoft sync services Power PC applications no longer supported." How do I get rid of message?

Lion no longer supports PowerPC apps. If this is Microsoft Office 2008 (Entourage 2008) then you should disable the syncing services. (I don't have Office 2008 installed anymore so I don't know exactly what it's called anymore.) If you have Microsoft Office 2004 or earlier, then it can't be run on Lion at all since Lion removed Rosetta, which is what allowed a PPC app to run on an Intel based Mac.
Also, I believe Microsoft removed sync services from the current Outlook 2011 (which replaces Entourage) so even upgrading to a newer version of Microsoft Office will not get you back that calendar sync feature. Supposedly Microsoft is working on a new syncing system, but I wouldn't hold my breath.

Unable to open the events in Iphoto or transfer photos to create a book?

Unable to open the events in Iphoto or transfer photos to create a book. The events are there but I am when double clicking they are not opening up. Also I am unable to drag photos to create a book. Any suggestions??

Select one of the affected photos in the iPhoto Window and go File -> Reveal in Finder -> Original. A Finder Window should open with the file selected. Does it?
Regards
TD

ZAV 10 - Unable to open parameter file error

When trying to launch a ZAV 10 app, C-Cure Administration Console, users are getting an error "**Unable to open parameter file cc800cl.pf, errno 2. (1247)". This only appears to be happening on Win7. This did work when first created, but after a few weeks the error has started to pop-up.

If this was working and is not now, and you are certain nothing has changed on the client systems (or at least nothing that could interfere here), then this might be an issue with the license used when building the application. What is the expiry date of your license and was it applied prior to building this exe?
If this isn't expiring please open an SR for this issue, if you can. This is the information the support team will require:
- Copies of any warnings or errors around the time the issue occurs (or a copy of the application and system event logs, in .evtx format)
- A copy of the exe you are using
- If you can build the exe again as a diagnostic-mode executable and provide the diagnostics generated when attempting to run, that can be very helpful
- It may also be required that you send installation media for the application and your build process, so the team can attempt to reproduce the issue in-house
- You will also typically be asked for the .xappl file and associated Files folder, if reproducing in-house is required. This will become absolutely necessary if a ticket needs to be filed with Spoon, so sending it ahead of time is a good idea

Unable to open RFC connection - Err message

I all
I am trying to install SAP ERP 2004 SR1 on Microsoft Windows Server 2003, SQL Server 2000. I have successfully installed the Central Instance but when I try to install the Database instance after the database loading the following error is given:
FRF00007 - Unable to open RFC connection.
I have also tried to start the sap system. The message_server and igswd processed run ok, but the disp+work process is stopped.
I am also sending you the developer trace for this process.
Thank you a lot
Vasil
trc file: "dev_disp", trc level: 1, release: "640"
Mon Jul 27 11:24:48 2009
kernel runs with dp version 128000(ext=102000) (@(#) DPLIB-INT-VERSION-128000-UC)
length of sys_adm_ext is 524 bytes
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 43
intno 20020600
make: multithreaded, Unicode
pid 2668
***LOG Q00=> DpSapEnvInit, DPStart (01 2668) [dpxxdisp.c 1100]
 shared lib "dw_xml.dll" version 43 successfully loaded
 shared lib "dw_xtc.dll" version 43 successfully loaded
 shared lib "dw_stl.dll" version 43 successfully loaded
 shared lib "dw_gui.dll" version 43 successfully loaded
Mon Jul 27 11:24:53 2009
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3886]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: JAVA is not active
DpShMCreate: sizeof(wp_adm) 10528 (1316)
DpShMCreate: sizeof(tm_adm) 2780232 (13832)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpShMCreate: sizeof(comm_adm) 290000 (580)
DpShMCreate: sizeof(vmc_adm) 0 (372)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: SHM_DP_ADM_KEY (addr: 058C0040, size: 3192688)
DpShMCreate: allocated sys_adm at 058C0040
DpShMCreate: allocated wp_adm at 058C1B58
DpShMCreate: allocated tm_adm_list at 058C4478
DpShMCreate: allocated tm_adm at 058C44A0
DpShMCreate: allocated wp_ca_adm at 05B6B0E8
DpShMCreate: allocated appc_ca_adm at 05B70EA8
DpShMCreate: allocated comm_adm_list at 05B72DE8
DpShMCreate: allocated comm_adm at 05B72E00
DpShMCreate: allocated vmc_adm_list at 05BB9AD0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 05BB9AF8
DpShMCreate: allocated wall_adm at 05BB9B00
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 1131 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 2.6.1 2.6 4.0) [dpxxdisp.c 1462]
***LOG Q0K=> DpMsAttach, mscon ( upayweb1) [dpxxdisp.c 9736]
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Mon Jul 27 11:24:54 2009
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 43
Release check o.K.
Mon Jul 27 11:25:33 2009
ERROR => W0 (pid 3740) died [dpxxdisp.c 12187]
ERROR => W1 (pid 3748) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W2 (pid 3756) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W3 (pid 3764) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W4 (pid 3772) died [dpxxdisp.c 12187]
ERROR => W5 (pid 3780) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W6 (pid 3792) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W7 (pid 3800) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-3740 (SIGUSR2)
ERROR => DpWpKill(3740, SIGUSR2) failed [dpxxtool.c 2468]
killing W1-3748 (SIGUSR2)
ERROR => DpWpKill(3748, SIGUSR2) failed [dpxxtool.c 2468]
killing W2-3756 (SIGUSR2)
ERROR => DpWpKill(3756, SIGUSR2) failed [dpxxtool.c 2468]
killing W3-3764 (SIGUSR2)
ERROR => DpWpKill(3764, SIGUSR2) failed [dpxxtool.c 2468]
killing W4-3772 (SIGUSR2)
ERROR => DpWpKill(3772, SIGUSR2) failed [dpxxtool.c 2468]
killing W5-3780 (SIGUSR2)
ERROR => DpWpKill(3780, SIGUSR2) failed [dpxxtool.c 2468]
killing W6-3792 (SIGUSR2)
ERROR => DpWpKill(3792, SIGUSR2) failed [dpxxtool.c 2468]
killing W7-3800 (SIGUSR2)
ERROR => DpWpKill(3800, SIGUSR2) failed [dpxxtool.c 2468]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 27 11:25:43 2009
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Mon Jul 27 09:25:43 2009
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 3740 Ended no 1 0 0
1 DIA 3748 Ended no 1 0 0
2 UPD 3756 Ended no 1 0 0
3 ENQ 3764 Ended no 1 0 0
4 BTC 3772 Ended no 1 0 0
5 BTC 3780 Ended no 1 0 0
6 SPO 3792 Ended no 1 0 0
7 UP2 3800 Ended no 1 0 0
Dispatcher Queue Statistics Mon Jul 27 09:25:43 2009
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
10
10
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 13
wake_evt_udp_now 0
wake events total 9, udp 8 ( 88%), shm 1 ( 11%)
since last update total 9, udp 8 ( 88%), shm 1 ( 11%)
Dump of tm_adm structure: Mon Jul 27 09:25:43 2009
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Mon Jul 27 09:25:43 2009
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 27 11:25:48 2009
NiISelect: TIMEOUT occured (5000 ms)
Shutdown server ...
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (3724) (SOFT_KILL)
Stop icman
killing process (3732) (SOFT_KILL)
Terminate gui connections
[DpProcDied] Process lives (PID:3724 HANDLE:1592)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 27 11:25:49 2009
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:3724 HANDLE:1592)
[DpProcDied] Process died (PID:3732 HANDLE:1584)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
NiIMyHostName: hostname = 'upayweb1'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9962]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 3 from selectset
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/8
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 19)
MBUF component DOWN
NiBufClose: clear extensions for hdl 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 3 / socket 1596
MsIDetach: detach MS-system
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 2668) [dpxxdisp.c 8495]
Good Bye .....

Hi Juan 
I am sending you the log from dev_w0 
 
Thank you a lot, 
Vasil
 
 
 
trc file: "dev_w0", trc level: 1, release: "640" 
 
* 
ACTIVE TRACE LEVEL 1 
ACTIVE TRACE COMPONENTS all, M 
* 
B 
B Mon Jul 27 11:24:53 2009 
B create_con (con_name=R/3) 
B Loading DB library 'C:\usr\sap\UFT\SYS\exe\run\dbmssslib.dll' ... 
B Library 'C:\usr\sap\UFT\SYS\exe\run\dbmssslib.dll' loaded 
B Version of 'C:\usr\sap\UFT\SYS\exe\run\dbmssslib.dll' is "640.00", patchlevel (0.43) 
B New connection 0 created 
M systemid 560 (PC with Windows NT) 
M relno 6400 
M patchlevel 0 
M patchno 43 
M intno 20020600 
M make: multithreaded, Unicode 
M pid 3740 
M 
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3740) [dpxxdisp.c 1160] 
I MtxInit: -2 0 0 
M DpSysAdmExtCreate: ABAP is active 
M DpSysAdmExtCreate: JAVA is not active 
M DpShMCreate: sizeof(wp_adm) 10528 (1316) 
M DpShMCreate: sizeof(tm_adm) 2780232 (13832) 
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80) 
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80) 
M DpShMCreate: sizeof(comm_adm) 290000 (580) 
M DpShMCreate: sizeof(vmc_adm) 0 (372) 
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184) 
M DpShMCreate: SHM_DP_ADM_KEY (addr: 060C0040, size: 3192688) 
M DpShMCreate: allocated sys_adm at 060C0040 
M DpShMCreate: allocated wp_adm at 060C1B58 
M DpShMCreate: allocated tm_adm_list at 060C4478 
M DpShMCreate: allocated tm_adm at 060C44A0 
M DpShMCreate: allocated wp_ca_adm at 0636B0E8 
M DpShMCreate: allocated appc_ca_adm at 06370EA8 
M DpShMCreate: allocated comm_adm_list at 06372DE8 
M DpShMCreate: allocated comm_adm at 06372E00 
M DpShMCreate: allocated vmc_adm_list at 063B9AD0 
M DpShMCreate: system runs without vmc_adm 
M DpShMCreate: allocated ca_info at 063B9AF8 
M DpShMCreate: allocated wall_adm at 063B9B00 
X 
X Mon Jul 27 11:24:54 2009 
X EmInit: MmSetImplementation( 2 ). 
X <ES> client 0 initializing .... 
X Using implementation flat 
M <EsNT> Memory Reset disabled as NT default 
X ES initialized. 
M 
M Mon Jul 27 11:24:55 2009 
M calling db_connect ... 
C Thank You for using the SLOLEDB-interface 
C Using dynamic link library 'C:\usr\sap\UFT\SYS\exe\run\dbmssslib.dll' 
C dbmssslib.dll patch info 
C patchlevel 0 
C patchno 43 
C patchcomment View with literal containing (0x60) (786638) 
C np:(local) connection used on UPAYWEB1 
C Using Provider SQLNCLI 
C OpenOledbConnection: MARS property was set successfully. 
C Provider Release:9.00.1399.06 
C Using Provider SQLNCLI 
C OpenOledbConnection: MARS property was set successfully. 
C Cache sizes: header 68 bytes, 20000 names (31520000 bytes), 1000 dynamic statements (5672000 bytes), total 37192068 bytes 
C Using shared procedure name cache UPAYWEB1_UFTUFT_UFT_MEM initialized by another process. 
C Connected to db server : [UPAYWEB1] server_used : [np:(local)], dbname: UFT, dbuser: uft 
C pn_id:UPAYWEB1_UFTUFT_UFT 
C Not using MARS (on sql 8.0) 
B Connection 0 opened 
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost 
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20090727 112454 UPAYWEB1 
C The IRow interface is supported by this OLEDB provider 
M db_connect o.k. 
I MtxInit: 0 0 0 
M SHM_PRES_BUF (addr: 0AD60040, size: 4400000) 
M SHM_ROLL_AREA (addr: 5EF60040, size: 160563200) 
M SHM_PAGING_AREA (addr: 0B1A0040, size: 72417280) 
M SHM_ROLL_ADM (addr: 0F6C0040, size: 1603610) 
M SHM_PAGING_ADM (addr: 0F850040, size: 525344) 
M ThCreateNoBuffer allocated 540152 bytes for 1000 entries at 0F8E0040 
M ThCreateNoBuffer index size: 3000 elems 
M ThCreateVBAdm allocated 12160 bytes (50 server) at 0F970040 
X EmInit: MmSetImplementation( 2 ). 
X <ES> client 0 initializing .... 
X Using implementation flat 
X ES initialized. 
C 
C Mon Jul 27 11:24:58 2009 
C The IRow interface is supported by this OLEDB provider 
B db_con_shm_ini: WP_ID = 0, WP_CNT = 8 
C Using Provider SQLNCLI 
C OpenOledbConnection: MARS property was set successfully. 
B dbtbxbuf: Buffer TABL (addr: 146900C8, size: 30000000, end: 1632C448) 
B dbtbxbuf: Profile: max_objects = 5000, displace = 1, reorg = 1 
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5 
B dbtbxbuf: protect_shm = 0, force_checks = 0 
B dbtbxbuf: tsize_retry = 14304000 
B ***LOG BB0=> buffer TABL started with length 30000000 bytes [dbtbxbuf#7 @ 15714] [dbtbxbuf1571 4] 
B dbtbxbuf: Buffer TABLP (addr: 163300C8, size: 10240000, end: 16CF40C8) 
B dbtbxbuf: Profile: max_objects = 500, displace = 1, reorg = 1 
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5 
B dbtbxbuf: protect_shm = 0, force_checks = 0 
B dbtbxbuf: tsize_retry = 5047296 
B ***LOG BB0=> buffer TABLP started with length 10240000 bytes [dbtbxbuf#7 @ 15714] [dbtbxbuf1571 4] 
B dbtbxbuf: Reading TBX statistics: 
B dbtbxbuf: Opening C:\usr\sap\UFT\DVEBMGS01\data\tbxnew failed (No such file or directory). 
B dbtbxbuf: Renaming C:\usr\sap\UFT\DVEBMGS01\data\tbxnew to C:\usr\sap\UFT\DVEBMGS01\data\tbxstat failed (No such file or directory). 
B dbtbxbuf: 0 object entries precreated 
C sloledb.cpp [ParamStmtExec,line 11888]: Error/Message: (err 8180, sev 0), Statement(s) could not be prepared. 
C Procname: [##Y3UPAYWEB1uft00000037400000000002112455] 
C sloledb.cpp [ParamStmtExec,line 11888]: Error/Message: (err 208, sev 16), Invalid object name 'DDLOG'. 
C Procname: [##Y3UPAYWEB1uft00000037400000000002112455] 
C ParamStmtExec failed. HR 80040e14 DBSL retcode 103. stmt: [SELECT MAX(SEQNUMBER) AS c FROM DDLOG ] 
C Conn_i:1 selection:1 singleton:1 flag_fupd:0 use_cursor:0 chksum: 112017 
C DbSlRead - Error 103 (dbcode 208) on open 
C DbSlRead - <##Y3UPAYWEB1uft00000037400000000002112455> 
C DbSlRead - Error 103 (dbcode 208) on fetch 
C DbSlRead - <##Y3UPAYWEB1uft00000037400000000002112455> 
B ***LOG BZY=> unexpected return code 103 calling SEL [dbsynseq#1 @ 255] [dbsynseq0255 ] 
B db_syinit failed 
M *** ERROR => ThCallHooks: event handler db_init for event CREATE_SHM failed [thxxtool3.c 252] 
M *** ERROR => ThIPCInit: hook failed [thxxhead.c 1901] 
M ***LOG R19=> tskh_init, ThIPCInit ( TSKH-IPC-000001) [thxxhead.c 1359] 
M in_ThErrHandle: 1 
M *** ERROR => tskh_init: ThIPCInit (step 1, th_errno 17, action 3, level 1) [thxxhead.c 9413] 
M 
M Info for wp 0 
M 
M stat = 4 
M reqtype = 1 
M act_reqtype = -1 
M rq_info = 0 
M tid = -1 
M mode = 255 
M len = -1 
M rq_id = 65535 
M rq_source = 255 
M last_tid = 0 
M last_mode = 0 
M int_checked_resource(RFC) = 0 
M ext_checked_resource(RFC) = 0 
M int_checked_resource(HTTP) = 0 
M ext_checked_resource(HTTP) = 0 
M report = > < 
M action = 0 
M tab_name = > < 
M 
M ***************************************************************************** 
M * 
M * LOCATION SAP-Server upayweb1_UFT_01 on host upayweb1 (wp 0) 
M * ERROR tskh_init: ThIPCInit 
M * 
M * TIME Mon Jul 27 11:24:58 2009 
M * RELEASE 640 
M * COMPONENT Taskhandler 
M * VERSION 1 
M * RC 17 
M * MODULE thxxhead.c 
M * LINE 9589 
M * COUNTER 1 
M * 
M ***************************************************************************** 
M 
M PfStatDisconnect: disconnect statistics 
M Entering TH_CALLHOOKS 
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP 
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730] 
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 252] 
M Entering ThSetStatError 
M Entering ThReadDetachMode 
M call ThrShutDown (1)... 
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3740) [dpnttool.c 357]

Unable to open web service tester page

Hi
I'm three days trying to resolve this problem. I 'dont find a solution. I'm using ejb3.0 and web service. When I test the the application show me the messages Unable to open web service tester page. The application server is start up.
I'm trying this example. http://www.netbeans.org/download/flash/platform_55/platform_ws/
When I try to deploy the application show me this error.
C:/Sun/AppServer/jdk\bin\java
-client
-Xmx512m
-XX:NewRatio=2
-Dcom.sun.aas.defaultLogFile=C:/Sun/AppServer/domains/domain1/logs/server.log
-Djava.endorsed.dirs=C:/Sun/AppServer/lib/endorsed
-Djava.security.policy=C:/Sun/AppServer/domains/domain1/config/server.policy
-Djava.security.auth.login.config=C:/Sun/AppServer/domains/domain1/config/login.conf
-Dsun.rmi.dgc.server.gcInterval=3600000
-Dsun.rmi.dgc.client.gcInterval=3600000
-Djavax.net.ssl.keyStore=C:/Sun/AppServer/domains/domain1/config/keystore.jks
-Djavax.net.ssl.trustStore=C:/Sun/AppServer/domains/domain1/config/cacerts.jks
-Djava.ext.dirs=C:/Sun/AppServer/jdk/jre/lib/ext;C:/Sun/AppServer/domains/domain1/lib/ext;C:/Sun/AppServer/javadb/lib
-Djdbc.drivers=org.apache.derby.jdbc.ClientDriver
-Djavax.management.builder.initial=com.sun.enterprise.admin.server.core.jmx.AppServerMBeanServerBuilder
-Dcom.sun.enterprise.config.config_environment_factory_class=com.sun.enterprise.config.serverbeans.AppserverConfigEnvironmentFactory
-Dcom.sun.enterprise.taglibs=appserv-jstl.jar,jsf-impl.jar
-Dcom.sun.enterprise.taglisteners=jsf-impl.jar
-Dcom.sun.aas.classloader.optionalOverrideableChain=appserv-ws.jar,commons-logging.jar,commons-launcher.jar
-Dcom.sun.aas.classloader.appserverChainJars=admin-cli.jar,admin-cli-ee.jar,dbschema.jar,j2ee-svc.jar
-Dcom.sun.aas.classloader.serverClassPath.ee=%HADB_HOME%/lib/hadbjdbc4.jar,C:/Sun/AppServer/lib/SUNWjdmk/5.1/lib/jdmkrt.jar,%HADB_HOME%/lib/dbstate.jar,%HADB_HOME%/lib/hadbm.jar,%HADB_HOME%/lib/hadbmgt.jar,C:/Sun/AppServer/lib/SUNWmfwk/lib/mfwk_instrum_tk.jar
-Dcom.sun.aas.configName=server-config
-Ddomain.name=domain1
-Djmx.invoke.getters=true
-Dcom.sun.aas.promptForIdentity=true
-Dcom.sun.aas.classloader.optionalOverrideableChain.ee=
-Dcom.sun.aas.instanceRoot=C:/Sun/AppServer/domains/domain1
-Dcom.sun.aas.domainName=domain1
-Dcom.sun.aas.classloader.sharedChainJars=javaee.jar,C:/Sun/AppServer/jdk/lib/tools.jar,install/applications/jmsra/imqjmsra.jar,commons-launcher.jar,C:/Sun/AppServer/imq/lib/jaxm-api.jar,C:/Sun/AppServer/imq/lib/fscontext.jar,C:/Sun/AppServer/imq/lib/imqbroker.jar,C:/Sun/AppServer/imq/lib/imqjmx.jar,C:/Sun/AppServer/imq/lib/imqxm.jar,C:/Sun/AppServer/lib/ant/lib/ant.jar,appserv-ws.jar,mail.jar,jsf-api.jar,jsf-impl.jar,appserv-jstl.jar,appserv-env.jar,jmxremote_optional.jar,C:/Sun/AppServer/lib/SUNWjdmk/5.1/lib/jdmkrt.jar,commons-logging.jar,activation.jar,appserv-rt.jar,appserv-admin.jar,appserv-cmp.jar
-Dcom.sun.aas.classloader.sharedChainJars.ee=appserv-se.jar,appserv-ee.jar,%HADB_HOME%/lib/dbstate.jar,%HADB_HOME%/lib/hadbjdbc4.jar,jgroups-all.jar,C:/Sun/AppServer/lib/SUNWmfwk/lib/mfwk_instrum_tk.jar
-Djava.util.logging.manager=com.sun.enterprise.server.logging.ServerLogManager
-Dcom.sun.enterprise.overrideablejavaxpackages=javax.xml.bind,javax.help,javax.portlet
-Dcom.sun.aas.classloader.serverClassPath=C:/Sun/AppServer/lib/install/applications/jmsra/imqjmsra.jar,C:/Sun/AppServer/imq/lib/jaxm-api.jar,C:/Sun/AppServer/imq/lib/fscontext.jar,C:/Sun/AppServer/imq/lib/imqbroker.jar,C:/Sun/AppServer/imq/lib/imqjmx.jar,C:/Sun/AppServer/lib/ant/lib/ant.jar,C:/Sun/AppServer/lib/SUNWjdmk/5.1/lib/jdmkrt.jar
-Dcom.sun.aas.classloader.appserverChainJars.ee=
-Dcom.sun.aas.configRoot=C:/Sun/AppServer/config
-Djava.library.path=C:\Sun\AppServer\lib;C:\Sun\AppServer\lib;C:\Sun\AppServer\jdk\bin;.;C:\WINDOWS\system32;C:\WINDOWS;C:\Sun\AppServer\lib;C:\Sun\AppServer\bin;C:\Sun\AppServer\bin;C:\Sun\AppServer\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Archivos de programa\Microsoft SQL Server\80\Tools\Binn\;C:\Archivos de programa\subversion-1.3.2\;C:\Archivos de programa\Subversion\bin;C:\Archivos de programa\QuickTime\QTSystem\;;;
-Dcom.sun.aas.instanceName=server
-Dcom.sun.aas.processLauncher=SE
-Dcom.sun.aas.installRoot=C:/Sun/AppServer
-Dcom.sun.aas.ClassPathPrefix=
-Dcom.sun.aas.ClassPathSuffix=
-Dcom.sun.aas.ServerClassPath=
-cp
;C:/Sun/AppServer/lib/appserv-launch.jar
com.sun.enterprise.server.PELaunch
start|#]
Starting Sun Java System Application Server Platform Edition 9.0 (build b48) ...
CORE5098: AS Socket Service Initialization has been completed.
CORE5076: Using [Java HotSpot(TM) Client VM, Version 1.5.0_06] from [Sun Microsystems Inc.]
SEC1002: Security Manager is OFF.
ADM0001:MBeanServer initialized successfully
SEC1143: Loading policy provider com.sun.enterprise.security.provider.PolicyWrapper.
sgmt.service_initialized
ADM1079: Initialization of AMX MBeans successful
ADM1504: Here is the JMXServiceURL for the Standard JMXConnectorServer: [service:jmx:rmi:///jndi/rmi://dani:8686/jmxrmi]. This is where the remote administrative clients should connect using the standard JMX connectors
ADM1506: Status of Standard JMX Connector: Active = [true]
autoDeployment status dir missing, creating a new one
[AutoDeploy] Selecting file C:\Sun\AppServer\lib\install\applications\MEjbApp.ear for autodeployment.
deployed with moduleid = MEjbApp
[AutoDeploy] Successfully autodeployed : C:\Sun\AppServer\lib\install\applications\MEjbApp.ear.
[AutoDeploy] Selecting file C:\Sun\AppServer\lib\install\applications\__ejb_container_timer_app.ear for autodeployment.
deployed with moduleid = __ejb_container_timer_app
[AutoDeploy] Successfully autodeployed : C:\Sun\AppServer\lib\install\applications\__ejb_container_timer_app.ear.
[AutoDeploy] Selecting file C:\Sun\AppServer\lib\install\applications\__JWSappclients.ear for autodeployment.
deployed with moduleid = __JWSappclients
[AutoDeploy] Successfully autodeployed : C:\Sun\AppServer\lib\install\applications\__JWSappclients.ear.
SMGT0007: Self Management Rules service is enabled
Application server startup complete.
WEB0302: Starting Sun-Java-System/Application-Server.
WEB0100: Loading web module [__default-admingui] in virtual server [__asadmin] at [/]
WEB0100: Loading web module [adminapp] in virtual server [__asadmin] at [/web1]
WEB0100: Loading web module [admingui] in virtual server [__asadmin] at [/asadmin]
Initializing Sun's JavaServer Faces implementation (1.2-b20-FCS) for context '/asadmin'
Completed initializing Sun's JavaServer Faces implementation (1.2-b20-FCS) for context '/asadmin'
Initializing Sun's JavaServer Faces implementation (1.2-b20-FCS) for context ''
Completed initializing Sun's JavaServer Faces implementation (1.2-b20-FCS) for context ''
WEB0712: Starting Sun-Java-System/Application-Server HTTP/1.1 on 8080
WEB0712: Starting Sun-Java-System/Application-Server HTTP/1.1 on 8181
WEB0712: Starting Sun-Java-System/Application-Server HTTP/1.1 on 4848
About to load the system app: __JWSappclients
WEB0100: Loading web module [__JWSappclients:sys.war] in virtual server [server] at [/__JWSappclients]
sending notification to server...server
CORE5051: Shutting down all J2EE applications ...
CORE 5060 : Stopping all J2EE Connector 1.5 Compliant resource adapters ...
CORE 5061 : Resource adapters Stop() Complete
CORE5052: Application shutdown complete.
[AutoDeploy] Disabling AutoDeployment service.
WEB0303: Stopping Sun-Java-System/Application-Server.
WEB0713: Stopping Sun-Java-System/Application-Server HTTP/1.1 on 8080
WEB0713: Stopping Sun-Java-System/Application-Server HTTP/1.1 on 8181
WEB0713: Stopping Sun-Java-System/Application-Server HTTP/1.1 on 4848
Waiting for 1 instance(s) to be deallocated
Waiting for 1 instance(s) to be deallocated
Waiting for 1 instance(s) to be deallocated
C:/Sun/AppServer/jdk\bin\java
-client
-Xmx512m
-XX:NewRatio=2
-Dcom.sun.aas.defaultLogFile=C:/Sun/AppServer/domains/domain1/logs/server.log
-Djava.endorsed.dirs=C:/Sun/AppServer/lib/endorsed
-Djava.security.policy=C:/Sun/AppServer/domains/domain1/config/server.policy
-Djava.security.auth.login.config=C:/Sun/AppServer/domains/domain1/config/login.conf
-Dsun.rmi.dgc.server.gcInterval=3600000
-Dsun.rmi.dgc.client.gcInterval=3600000
-Djavax.net.ssl.keyStore=C:/Sun/AppServer/domains/domain1/config/keystore.jks
-Djavax.net.ssl.trustStore=C:/Sun/AppServer/domains/domain1/config/cacerts.jks
-Djava.ext.dirs=C:/Sun/AppServer/jdk/jre/lib/ext;C:/Sun/AppServer/domains/domain1/lib/ext;C:/Sun/AppServer/javadb/lib
-Djdbc.drivers=org.apache.derby.jdbc.ClientDriver
-Djavax.management.builder.initial=com.sun.enterprise.admin.server.core.jmx.AppServerMBeanServerBuilder
-Dcom.sun.enterprise.config.config_environment_factory_class=com.sun.enterprise.config.serverbeans.AppserverConfigEnvironmentFactory
-Dcom.sun.enterprise.taglibs=appserv-jstl.jar,jsf-impl.jar
-Dcom.sun.enterprise.taglisteners=jsf-impl.jar
-Dcom.sun.aas.classloader.optionalOverrideableChain=appserv-ws.jar,commons-logging.jar,commons-launcher.jar
-Dcom.sun.aas.classloader.appserverChainJars=admin-cli.jar,admin-cli-ee.jar,dbschema.jar,j2ee-svc.jar
-Dcom.sun.aas.classloader.serverClassPath.ee=%HADB_HOME%/lib/hadbjdbc4.jar,C:/Sun/AppServer/lib/SUNWjdmk/5.1/lib/jdmkrt.jar,%HADB_HOME%/lib/dbstate.jar,%HADB_HOME%/lib/hadbm.jar,%HADB_HOME%/lib/hadbmgt.jar,C:/Sun/AppServer/lib/SUNWmfwk/lib/mfwk_instrum_tk.jar
-Dcom.sun.aas.configName=server-config
-Ddomain.name=domain1
-Djmx.invoke.getters=true
-Dcom.sun.aas.promptForIdentity=true
-Dcom.sun.aas.classloader.optionalOverrideableChain.ee=
-Dcom.sun.aas.instanceRoot=C:/Sun/AppServer/domains/domain1
-Dcom.sun.aas.domainName=domain1
-Dcom.sun.aas.classloader.sharedChainJars=javaee.jar,C:/Sun/AppServer/jdk/lib/tools.jar,install/applications/jmsra/imqjmsra.jar,commons-launcher.jar,C:/Sun/AppServer/imq/lib/jaxm-api.jar,C:/Sun/AppServer/imq/lib/fscontext.jar,C:/Sun/AppServer/imq/lib/imqbroker.jar,C:/Sun/AppServer/imq/lib/imqjmx.jar,C:/Sun/AppServer/imq/lib/imqxm.jar,C:/Sun/AppServer/lib/ant/lib/ant.jar,appserv-ws.jar,mail.jar,jsf-api.jar,jsf-impl.jar,appserv-jstl.jar,appserv-env.jar,jmxremote_optional.jar,C:/Sun/AppServer/lib/SUNWjdmk/5.1/lib/jdmkrt.jar,commons-logging.jar,activation.jar,appserv-rt.jar,appserv-admin.jar,appserv-cmp.jar
-Dcom.sun.aas.classloader.sharedChainJars.ee=appserv-se.jar,appserv-ee.jar,%HADB_HOME%/lib/dbstate.jar,%HADB_HOME%/lib/hadbjdbc4.jar,jgroups-all.jar,C:/Sun/AppServer/lib/SUNWmfwk/lib/mfwk_instrum_tk.jar
-Djava.util.logging.manager=com.sun.enterprise.server.logging.ServerLogManager
-Dcom.sun.enterprise.overrideablejavaxpackages=javax.xml.bind,javax.help,javax.portlet
-Dcom.sun.aas.classloader.serverClassPath=C:/Sun/AppServer/lib/install/applications/jmsra/imqjmsra.jar,C:/Sun/AppServer/imq/lib/jaxm-api.jar,C:/Sun/AppServer/imq/lib/fscontext.jar,C:/Sun/AppServer/imq/lib/imqbroker.jar,C:/Sun/AppServer/imq/lib/imqjmx.jar,C:/Sun/AppServer/lib/ant/lib/ant.jar,C:/Sun/AppServer/lib/SUNWjdmk/5.1/lib/jdmkrt.jar
-Dcom.sun.aas.classloader.appserverChainJars.ee=
-Dcom.sun.aas.configRoot=C:/Sun/AppServer/config
-Djava.library.path=C:\Sun\AppServer\lib;C:\Sun\AppServer\lib;C:\Sun\AppServer\jdk\bin;.;C:\WINDOWS\system32;C:\WINDOWS;C:\Sun\AppServer\lib;C:\Sun\AppServer\bin;C:\Sun\AppServer\bin;C:\Sun\AppServer\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Archivos de programa\Microsoft SQL Server\80\Tools\Binn\;C:\Archivos de programa\subversion-1.3.2\;C:\Archivos de programa\Subversion\bin;C:\Archivos de programa\QuickTime\QTSystem\;;;
-Dcom.sun.aas.instanceName=server
-Dcom.sun.aas.processLauncher=SE
-Dcom.sun.aas.installRoot=C:/Sun/AppServer
-Dcom.sun.aas.ClassPathPrefix=
-Dcom.sun.aas.ClassPathSuffix=C:\Sun\AppServer\domains\domain1\lib\mysql-connector-java-3.1.12-bin.jar
-Dcom.sun.aas.ServerClassPath=
-cp
;C:/Sun/AppServer/lib/appserv-launch.jar
com.sun.enterprise.server.PELaunch
start|#]
Starting Sun Java System Application Server Platform Edition 9.0 (build b48) ...
CORE5098: AS Socket Service Initialization has been completed.
CORE5076: Using [Java HotSpot(TM) Client VM, Version 1.5.0_06] from [Sun Microsystems Inc.]
SEC1002: Security Manager is OFF.
ADM0001:MBeanServer initialized successfully
SEC1143: Loading policy provider com.sun.enterprise.security.provider.PolicyWrapper.
sgmt.service_initialized
ADM1079: Initialization of AMX MBeans successful
ADM1504: Here is the JMXServiceURL for the Standard JMXConnectorServer: [service:jmx:rmi:///jndi/rmi://dani:8686/jmxrmi]. This is where the remote administrative clients should connect using the standard JMX connectors
ADM1506: Status of Standard JMX Connector: Active = [true]
SMGT0007: Self Management Rules service is enabled
Application server startup complete.
WEB0302: Starting Sun-Java-System/Application-Server.
WEB0100: Loading web module [__default-admingui] in virtual server [__asadmin] at [/]
WEB0100: Loading web module [adminapp] in virtual server [__asadmin] at [/web1]
WEB0100: Loading web module [admingui] in virtual server [__asadmin] at [/asadmin]
Initializing Sun's JavaServer Faces implementation (1.2-b20-FCS) for context '/asadmin'
Completed initializing Sun's JavaServer Faces implementation (1.2-b20-FCS) for context '/asadmin'
Initializing Sun's JavaServer Faces implementation (1.2-b20-FCS) for context ''
Completed initializing Sun's JavaServer Faces implementation (1.2-b20-FCS) for context ''
WEB0712: Starting Sun-Java-System/Application-Server HTTP/1.1 on 8080
WEB0712: Starting Sun-Java-System/Application-Server HTTP/1.1 on 8181
WEB0712: Starting Sun-Java-System/Application-Server HTTP/1.1 on 4848
About to load the system app: __JWSappclients
WEB0100: Loading web module [__JWSappclients:sys.war] in virtual server [server] at [/__JWSappclients]
ADM1041:Sent the event to instance:[ResourceDeployEvent -- reference-added jdbc/aae]
CORE5004: Resource Deployed: [jdbc:aae].
wsgen successful
DPL5306:Servlet Web Service Endpoint [AAEWebService] listening at address [http://dani:8080/WebAAEstates/AAEWebServiceService]
deployed with moduleid = WebAAEstates
WEB0100: Loading web module [WebAAEstates] in virtual server [server] at [/WebAAEstates]
naming.bind
topLink_version
application_server_name_and_version
login_successful
Initializing Sun's JavaServer Faces implementation (1.2-b20-FCS) for context '/WebAAEstates'
Completed initializing Sun's JavaServer Faces implementation (1.2-b20-FCS) for context '/WebAAEstates'
exception caught
javax.naming.NameNotFoundException
 at com.sun.enterprise.naming.TransientContext.resolveContext(TransientContext.java:255)
 at com.sun.enterprise.naming.TransientContext.lookup(TransientContext.java:178)
 at com.sun.enterprise.naming.SerialContextProviderImpl.lookup(SerialContextProviderImpl.java:61)
 at com.sun.enterprise.naming.LocalSerialContextProviderImpl.lookup(LocalSerialContextProviderImpl.java:98)
 at com.sun.enterprise.naming.SerialContext.lookup(SerialContext.java:309)
 at javax.naming.InitialContext.lookup(InitialContext.java:351)
 at org.aae.jose.bd.AAEWebService.<init>(AAEWebService.java:43)
 at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
 at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
 at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
 at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
 at java.lang.Class.newInstance0(Class.java:350)
 at java.lang.Class.newInstance(Class.java:303)
 at com.sun.enterprise.webservice.JAXWSServlet.registerEndpoint(JAXWSServlet.java:291)
 at com.sun.enterprise.webservice.JAXWSServlet.doInit(JAXWSServlet.java:265)
 at com.sun.enterprise.webservice.JAXWSServlet.init(JAXWSServlet.java:108)
 at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1133)
 at org.apache.catalina.core.StandardWrapper.allocate(StandardWrapper.java:787)
 at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:183)
 at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
 at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
 at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:240)
 at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:179)
 at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
 at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:73)
 at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:182)
 at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
 at com.sun.enterprise.web.VirtualServerPipeline.invoke(VirtualServerPipeline.java:120)
 at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
 at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:137)
 at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
 at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
 at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
 at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:231)
 at com.sun.enterprise.web.connector.grizzly.ProcessorTask.invokeAdapter(ProcessorTask.java:667)
 at com.sun.enterprise.web.connector.grizzly.ProcessorTask.processNonBlocked(ProcessorTask.java:574)
 at com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:844)
 at com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:287)
 at com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:212)
 at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:252)
 at com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:75)
|#]
Servlet web service endpoint 'AAEWebService' failure
java.lang.RuntimeException: javax.naming.NameNotFoundException
 at org.aae.jose.bd.AAEWebService.<init>(AAEWebService.java:50)
 at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
 at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
 at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
 at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
 at java.lang.Class.newInstance0(Class.java:350)
 at java.lang.Class.newInstance(Class.java:303)
 at com.sun.enterprise.webservice.JAXWSServlet.registerEndpoint(JAXWSServlet.java:291)
 at com.sun.enterprise.webservice.JAXWSServlet.doInit(JAXWSServlet.java:265)
 at com.sun.enterprise.webservice.JAXWSServlet.init(JAXWSServlet.java:108)
 at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1133)
 at org.apache.catalina.core.StandardWrapper.allocate(StandardWrapper.java:787)
 at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:183)
 at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
 at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
 at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:240)
 at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:179)
 at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
 at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:73)
 at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:182)
 at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
 at com.sun.enterprise.web.VirtualServerPipeline.invoke(VirtualServerPipeline.java:120)
 at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
 at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:137)
 at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
 at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
 at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
 at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:231)
 at com.sun.enterprise.web.connector.grizzly.ProcessorTask.invokeAdapter(ProcessorTask.java:667)
 at com.sun.enterprise.web.connector.grizzly.ProcessorTask.processNonBlocked(ProcessorTask.java:574)
 at com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:844)
 at com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:287)
 at com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:212)
 at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:252)
 at com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:75)
Caused by: javax.naming.NameNotFoundException
 at com.sun.enterprise.naming.TransientContext.resolveContext(TransientContext.java:255)
 at com.sun.enterprise.naming.TransientContext.lookup(TransientContext.java:178)
 at com.sun.enterprise.naming.SerialContextProviderImpl.lookup(SerialContextProviderImpl.java:61)
 at com.sun.enterprise.naming.LocalSerialContextProviderImpl.lookup(LocalSerialContextProviderImpl.java:98)
 at com.sun.enterprise.naming.SerialContext.lookup(SerialContext.java:309)
 at javax.naming.InitialContext.lookup(InitialContext.java:351)
 at org.aae.jose.bd.AAEWebService.<init>(AAEWebService.java:43)
 ... 34 more
|#]
StandardWrapperValve[AAEWebService]: Allocate exception for servlet AAEWebService
javax.servlet.ServletException
 at com.sun.enterprise.webservice.JAXWSServlet.doInit(JAXWSServlet.java:273)
 at com.sun.enterprise.webservice.JAXWSServlet.init(JAXWSServlet.java:108)
 at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1133)
 at org.apache.catalina.core.StandardWrapper.allocate(StandardWrapper.java:787)
 at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:183)
 at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
 at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
 at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:240)
 at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:179)
 at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
 at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:73)
 at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:182)
 at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
 at com.sun.enterprise.web.VirtualServerPipeline.invoke(VirtualServerPipeline.java:120)
 at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
 at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:137)
 at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
 at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
 at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
 at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:231)
 at com.sun.enterprise.web.connector.grizzly.ProcessorTask.invokeAdapter(ProcessorTask.java:667)
 at com.sun.enterprise.web.connector.grizzly.ProcessorTask.processNonBlocked(ProcessorTask.java:574)
 at com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:844)
 at com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:287)
 at com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:212)
 at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:252)
 at com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:75)
Caused by: java.lang.RuntimeException: javax.naming.NameNotFoundException
 at org.aae.jose.bd.AAEWebService.<init>(AAEWebService.java:50)
 at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
 at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
 at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
 at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
 at java.lang.Class.newInstance0(Class.java:350)
 at java.lang.Class.newInstance(Class.java:303)
 at com.sun.enterprise.webservice.JAXWSServlet.registerEndpoint(JAXWSServlet.java:291)
 at com.sun.enterprise.webservice.JAXWSServlet.doInit(JAXWSServlet.java:265)
 ... 26 more
Caused by: javax.naming.NameNotFoundException
 at com.sun.enterprise.naming.TransientContext.resolveContext(TransientContext.java:255)
 at com.sun.enterprise.naming.TransientContext.lookup(TransientContext.java:178)
 at com.sun.enterprise.naming.SerialContextProviderImpl.lookup(SerialContextProviderImpl.java:61)
 at com.sun.enterprise.naming.LocalSerialContextProviderImpl.lookup(LocalSerialContextProviderImpl.java:98)
 at com.sun.enterprise.naming.SerialContext.lookup(SerialContext.java:309)
 at javax.naming.InitialContext.lookup(InitialContext.java:351)
 at org.aae.jose.bd.AAEWebService.<init>(AAEWebService.java:43)
 ... 34 more
|#]
exception caught
javax.naming.NameNotFoundException
 at com.sun.enterprise.naming.TransientContext.resolveContext(TransientContext.java:255)
 at com.sun.enterprise.naming.TransientContext.lookup(TransientContext.java:178)
 at com.sun.enterprise.naming.SerialContextProviderImpl.lookup(SerialContextProviderImpl.java:61)
 at com.sun.enterprise.naming.LocalSerialContextProviderImpl.lookup(LocalSerialContextProviderImpl.java:98)
 at com.sun.enterprise.naming.SerialContext.lookup(SerialContext.java:309)
 at javax.naming.InitialContext.lookup(InitialContext.java:351)
 at org.aae.jose.bd.AAEWebService.<init>(AAEWebService.java:43)
 at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
 at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
 at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
 at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
 at java.lang.Class.newInstance0(Class.java:350)
 at java.lang.Class.newInstance(Class.java:303)
 at com.sun.enterprise.webservice.JAXWSServlet.registerEndpoint(JAXWSServlet.java:291)
 at com.sun.enterprise.webservice.JAXWSServlet.doInit(JAXWSServlet.java:265)
 at com.sun.enterprise.webservice.JAXWSServlet.init(JAXWSServlet.java:108)
 at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1133)
 at org.apache.catalina.core.StandardWrapper.allocate(StandardWrapper.java:787)
 at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:183)
 at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
 at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
 at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:240)
 at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:179)
 at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
 at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:73)
 at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:182)
 at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
 at com.sun.enterprise.web.VirtualServerPipeline.invoke(VirtualServerPipeline.java:120)
 at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
 at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:137)
 at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
 at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
 at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
 at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:231)
 at com.sun.enterprise.web.connector.grizzly.ProcessorTask.invokeAdapter(ProcessorTask.java:667)
 at com.sun.enterprise.web.connector.grizzly.ProcessorTask.processNonBlocked(ProcessorTask.java:574)
 at com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:844)
 at com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:287)
 at com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:212)
 at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:252)
 at com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:75)
|#]
Servlet web service endpoint 'AAEWebService' failure
java.lang.RuntimeException: javax.naming.NameNotFoundException
 at org.aae.jose.bd.AAEWebService.<init>(AAEWebService.java:50)
 at sun.reflect.NativeConstructorAccessorImpl.newIn

Hello,
you can check it at GlassFish Admin console (usually running on port 4848).
You need to log on to Admin console with the (default) or changed password (depends if you changed it during installation).
There you could see your web service deployed (usually in the "folder" Web services).
If you can see it you should see also wsdl - for your web service.
link:
http://developers.sun.com/appserver/reference/techart/ws_mgmt.html
Regards,
Miro

Server 08 R2 DC - unable to open ADUC, netlogon does not start

Hello everyone, and thank you in advance for any possible support.
Note: All identifying server/domain names have been replaced with "CORP" "Sub" and "Sibling" where appropriate. Our forest consists of 3 domains - two which are 'siblings' at the top, CORP and Sibling, (corp being
the primarily used one), and one which is a 'child' of Corp (Sub).
Today we identified that on one of my domain controllers (named for this post, CORP-DC6) we are unable to open ADUC. This is only one of our 8 DC's, and it does not hold any FSMO roles; the only two important pieces on this server is that it's where we manage
our OCS from (we use ADUC on this system to enable a user for OCS, create SIP addresses, etc) and that Certification Authority is installed on the system.
Attempting to open ADUC gives error "Naming information cannot be located because: The target principal name is incorrect."
Web searches for this prompted me to check DNS for issues. In looking into DNS, I found that the system was somehow assigned a different IP address than it should have (it was now at 192.168.1.124 instead of 192.168.1.290 where it should have been).
I moved the IP address back to the correct IP, and rebooted.
The issue was still there, so I continued searching; which lead me to a suggestion to check out my netlogon service. I found that the Netlogon service was NOT running. When attempting to start the service, it fails and I am presented wih the
following error in the System event log:
Log Name: System
Source: Service Control Manager
Date: 7/24/2013 10:54:59 AM
Event ID: 7023
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: CORP-DC6.corp.com
Description:
The Netlogon service terminated with the following error:
%%-1073741724
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
<EventID Qualifiers="49152">7023</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2013-07-24T14:54:59.175664400Z" />
<EventRecordID>850085</EventRecordID>
<Correlation />
<Execution ProcessID="496" ThreadID="584" />
<Channel>System</Channel>
<Computer>CORP-DC6.corp.om</Computer>
<Security />
</System>
<EventData>
<Data Name="param1">Netlogon</Data>
<Data Name="param2">%%-1073741724</Data>
</EventData>
</Event>
Additionally, there is also this error:
Log Name: System
Source: NETLOGON
Date: 7/24/2013 10:54:59 AM
Event ID: 5602
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: CORP-DC6.corp.com
Description:
An internal error occurred while accessing the computer's local or network security database.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="NETLOGON" />
<EventID Qualifiers="0">5602</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-07-24T14:54:59.000000000Z" />
<EventRecordID>850083</EventRecordID>
<Channel>System</Channel>
<Computer>CORP-DC6.corp.com</Computer>
<Security />
</System>
<EventData>
<Data>%%1317</Data>
<Binary>640000C0</Binary>
</EventData>
</Event>
At this point, I've read a bunch of stuff online and not really found anything that has helped nor seemed completely relevant.
Additional Info that may help out:
When I open Server Manager, it seems to think the local system's name is WIN-3OL3DIFK4S instead of CORP-DC6; similarly opening Device Manager from w/in Server manger gives a message about managing a remote system; even though I am managing the local system.
There are additional errors in the System and Application log which are certainly issues, but I do not know if they pertain to the main issue at hand here or not.
Log Name: System
Source: Microsoft-Windows-GroupPolicy
Date: 7/24/2013 10:55:04 AM
Event ID: 1055
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: CORP-DC6.corp.com
Description:
The processing of Group Policy failed. Windows could not resolve the computer name. This could be caused by one of more of the following:
a) Name Resolution failure on the current domain controller.
b) Active Directory Replication Latency (an account created on another domain controller has not replicated to the current domain controller).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-GroupPolicy" Guid="{AEA1B4FA-97D1-45F2-A64C-4D69FFFD92C9}" />
<EventID>1055</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>1</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2013-07-24T14:55:04.448473700Z" />
<EventRecordID>850088</EventRecordID>
<Correlation ActivityID="{582C2637-5A99-47AE-B50C-C1A063DDABDC}" />
<Execution ProcessID="888" ThreadID="1056" />
<Channel>System</Channel>
<Computer>CORP-DC6.corp.com</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="SupportInfo1">1</Data>
<Data Name="SupportInfo2">1632</Data>
<Data Name="ProcessingMode">1</Data>
<Data Name="ProcessingTimeInMilliseconds">11762</Data>
<Data Name="ErrorCode">5</Data>
<Data Name="ErrorDescription">Access is denied. </Data>
</EventData>
</Event>
Log Name: System
Source: LsaSrv
Date: 7/24/2013 10:55:13 AM
Event ID: 40961
Task Category: None
Level: Warning
Keywords:
User: SYSTEM
Computer: CORP-DC6.corp.com
Description:
The Security System could not establish a secured connection with the server ldap/corp-dc1.corp.com/[email protected]. No authentication protocol was available.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="LsaSrv" Guid="{199FE037-2B82-40A9-82AC-E1D46C792B99}" />
<EventID>40961</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2013-07-24T14:55:13.262489200Z" />
<EventRecordID>850092</EventRecordID>
<Correlation />
<Execution ProcessID="504" ThreadID="1332" />
<Channel>System</Channel>
<Computer>CORP-DC6.corp.com</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="Target">ldap/CORP-dc1.corp.com/[email protected]</Data>
</EventData>
</Event>
Log Name: System
Source: Microsoft-Windows-DfsSvc
Date: 7/24/2013 10:55:24 AM
Event ID: 14548
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: CORP-DC6.corp.com
Description:
The DFS Namespace service could not initialize the trusted domain information on this domain controller, but it will periodically retry the operation. The return code is in the record data.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-DfsSvc" Guid="{7DA4FE0E-FD42-4708-9AA5-89B77A224885}" EventSourceName="DfsSvc" />
<EventID Qualifiers="49152">14548</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-07-24T14:55:24.000000000Z" />
<EventRecordID>850102</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>System</Channel>
<Computer>CORP-DC6.corp.com</Computer>
<Security />
</System>
<EventData Name="DfsNoTrustedDomainInfo">
<Binary>B5060000</Binary>
</EventData>
</Event>
Log Name: System
Source: Microsoft-Windows-Security-Kerberos
Date: 7/24/2013 10:57:44 AM
Event ID: 4
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: CORP-DC6.corp.com
Description:
The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server host/corp-dc1.corp.com. The target name used was cifs/corp-dc1.corp.com. This indicates that the target server failed to decrypt the ticket provided by the client. This can occur when the target server principal name (SPN) is registered on an account other than the account the target service is using. Please ensure that the target SPN is registered on, and only registered on, the account used by the server. This error can also happen when the target service is using a different password for the target service account than what the Kerberos Key Distribution Center (KDC) has for the target service account. Please ensure that the service on the server and the KDC are both updated to use the current password. If the server name is not fully qualified, and the target domain (CORP.COM) is different from the client domain (CORP.COM), check if there are identically named server accounts in these two domains, or use the fully-qualified name to identify the server.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Security-Kerberos" Guid="{98E6CFCB-EE0A-41E0-A57B-622D4E1B30B1}" EventSourceName="Kerberos" />
<EventID Qualifiers="16384">4</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-07-24T14:57:44.000000000Z" />
<EventRecordID>850163</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>System</Channel>
<Computer>CORP-DC6.CORP.com</Computer>
<Security />
</System>
<EventData>
<Data Name="Server">host/corp-dc1.corp.com</Data>
<Data Name="TargetRealm">CORP.COM</Data>
<Data Name="Targetname">cifs/corp-dc1.corp.com</Data>
<Data Name="ClientRealm">CORP.COM</Data>
<Binary>
</Binary>
</EventData>
</Event>
There are also the following errors in the Application event log
Log Name: Application
Source: Microsoft-Windows-CertificationAuthority
Date: 7/24/2013 10:55:13 AM
Event ID: 91
Task Category: None
Level: Error
Keywords: Classic
User: SYSTEM
Computer: CORP-DC6.corp.com
Description:
Could not connect to the Active Directory. Active Directory Certificate Services will retry when processing requires Active Directory access.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-CertificationAuthority" Guid="{6A71D062-9AFE-4F35-AD08-52134F85DFB9}" EventSourceName="CertSvc" />
<EventID Qualifiers="49754">91</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-07-24T14:55:13.000000000Z" />
<EventRecordID>254767</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>Application</Channel>
<Computer>CORP-DC6.corp.com</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData Name="MSG_E_DS_RETRY">
</EventData>
</Event>
Log Name: Application
Source: Microsoft-Windows-CertificationAuthority
Date: 7/24/2013 10:55:30 AM
Event ID: 44
Task Category: None
Level: Error
Keywords: Classic
User: SYSTEM
Computer: CORP-DC6.corp.com
Description:
The "Windows default" Policy Module "Initialize" method returned an error. Logon failure: unknown user name or bad password. The returned status code is 0x8007052e (1326). The Active Directory containing the Certification Authority could not be contacted.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-CertificationAuthority" Guid="{6A71D062-9AFE-4F35-AD08-52134F85DFB9}" EventSourceName="CertSvc" />
<EventID Qualifiers="49754">44</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-07-24T14:55:30.000000000Z" />
<EventRecordID>254773</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>Application</Channel>
<Computer>CORP-DC6.corp.com</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData Name="MSG_E_POLICY_ERROR">
<Data Name="PolicyModuleDescription">Windows default</Data>
<Data Name="MethodName">Initialize</Data>
<Data Name="ErrorCode">0x8007052e (1326)</Data>
<Data Name="param4">The Active Directory containing the Certification Authority could not be contacted.
</Data>
<Data Name="ErrorString">Logon failure: unknown user name or bad password.</Data>
</EventData>
</Event>
Log Name: Application
Source: Microsoft-Windows-CertificateServicesClient-AutoEnrollment
Date: 7/24/2013 10:55:31 AM
Event ID: 6
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: CORP-DC6.corp.com
Description:
Automatic certificate enrollment for local system failed (0x8007052e) Logon failure: unknown user name or bad password.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-CertificateServicesClient-AutoEnrollment" Guid="{F0DB7EF8-B6F3-4005-9937-FEB77B9E1B43}" EventSourceName="AutoEnrollment" />
<EventID Qualifiers="16384">6</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-07-24T14:55:31.000000000Z" />
<EventRecordID>254775</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>Application</Channel>
<Computer>CORP-DC6.corp.com</Computer>
<Security />
</System>
<EventData>
<Data Name="Context">local system</Data>
<Data Name="ErrorCode">0x8007052e</Data>
<Data Name="ErrorMsg">Logon failure: unknown user name or bad password.
</Data>
</EventData>
</Event>
Link to output of DCDiag on pastebin: http://pastebin.com/VFPTcEGT
Smply based on a quick look through of the dcdiag and the various event log messages, It seems to me that the NetLogon service not starting up is causing most of the errors; but I am not aware of how to get it to start up.

Thank you for the quick response!
Windows firewall is disabled for all network profiles.
We have do have 7 DC's in the forest. here's an image i created a while back that lists our DC's and shows the replication partners (not really relevant, but this shows the DC's) http://i.imgur.com/AtjGuiM.jpg
I believe May 27 was a date in which we performed maintenance/upgrades on our vmware virtual hardware on this VM; when we upgraded the virtual hardware, it created a new NIC device on this server (which is how the system lost it's IP address configuration).
Today, I assigned the correct IP to the 'new' NIC.
will look at link about Kerberos
I'm unfortunately not familiar enough with the purposes of the internal vs external forwarders to comment on this or make a change at this time.
IPConfig info shown below
DNS is AD integrated, each domain has it's own DNS servers and have conditional forwarders to point to the other domain when appropriate. I believe each DC is also running DNS, but via DHCP we only pass out at most two DNS servers to client systems (main
office, it's 192.168.1.7, 192.168.1.8)
C:\Users\daniel_da>ipconfig -all
Windows IP Configuration
Host Name . . . . . . . . . . . . : CORP-DC6
Primary Dns Suffix . . . . . . . : corp.com
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : corp.com
sibling.com
sub.corp.com
Ethernet adapter Local Area Connection 2:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) PRO/1000 MT Network Connection #
2
Physical Address. . . . . . . . . : 00-50-56-AD-5C-29
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::f43a:f215:c266:5a70%14(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.190(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DHCPv6 IAID . . . . . . . . . . . : 285233238
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-12-F5-25-A1-00-50-56-AD-5C-29
DNS Servers . . . . . . . . . . . : 192.168.1.8
192.168.1.7
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.{5B04D7AC-9161-4A51-9ADC-166E37EE4D0E}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Teredo Tunneling Pseudo-Interface:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
C:\Users\daniel_da>
C:\Documents and Settings\daniel_da>ipconfig -all
Windows IP Configuration
Host Name . . . . . . . . . . . . : corp-dc1
Primary Dns Suffix . . . . . . . : corp.com
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : corp.com
sibling.com
sub.corp.com
Ethernet adapter Local Area Connection 3:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) PRO/1000 MT Network Connection
Physical Address. . . . . . . . . : 00-50-56-AD-29-1D
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.1.8
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 192.168.1.8
192.168.1.7
Primary WINS Server . . . . . . . : 192.168.1.7
C:\Documents and Settings\daniel_da>
C:\Documents and Settings\daniel_da>ipconfig -all
Windows IP Configuration
Host Name . . . . . . . . . . . . : CORP-DC2
Primary Dns Suffix . . . . . . . : corp.com
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : corp.com
sibling.com
sub.corp.com
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : VMware Accelerated AMD PCNet Adapter #3
Physical Address. . . . . . . . . : 00-50-56-AD-67-B0
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.1.7
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 192.168.1.7
192.168.1.8
Primary WINS Server . . . . . . . : 192.168.1.7
C:\Documents and Settings\daniel_da>
C:\Documents and Settings\daniel_da>ipconfig -all
Windows IP Configuration
Host Name . . . . . . . . . . . . : sub-dc2
Primary Dns Suffix . . . . . . . : sub.corp.com
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : sub.corp.com
corp.com
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : VMware Accelerated AMD PCNet Adapter
Physical Address. . . . . . . . . : 00-50-56-AD-39-7E
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.1.136
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 192.168.1.8
192.168.1.7
C:\Users\daniel_da>ipconfig -all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Sibling-DC3
Primary Dns Suffix . . . . . . . : sibling.com
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : sibling.com
corp.com
Ethernet adapter Local Area Connection 2:
Connection-specific DNS Suffix . : corp.com
Description . . . . . . . . . . . : Intel(R) PRO/1000 MT Network Connection #
2
Physical Address. . . . . . . . . : 00-50-56-AD-6E-97
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::7c97:854f:8bf5:efdb%17(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.147(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Monday, May 27, 2013 2:53:39 PM
Lease Expires . . . . . . . . . . : Thursday, July 25, 2013 2:56:42 AM
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.7
DHCPv6 IAID . . . . . . . . . . . : 285233238
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-14-B5-55-91-00-50-56-AD-6E-97
DNS Servers . . . . . . . . . . . : 192.168.1.8
192.168.1.7
Primary WINS Server . . . . . . . : 192.168.1.7
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.occfiber.com:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : corp.com
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Teredo Tunneling Pseudo-Interface:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
C:\Documents and Settings\daniel_da>ipconfig -all
Windows IP Configuration
Host Name . . . . . . . . . . . . : corpsite3-dc7
Primary Dns Suffix . . . . . . . : corp.com
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : corp.com
sibling.com
sub.corp.com
Ethernet adapter Dallas:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : BASP Virtual Adapter
Physical Address. . . . . . . . . : 00-19-B9-EA-65-FA
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.35.7
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.35.1
DNS Servers . . . . . . . . . . . : 192.168.35.7
C:\Documents and Settings\daniel_da>ipconfig -all
Windows IP Configuration
Host Name . . . . . . . . . . . . : siblig-dc1
Primary Dns Suffix . . . . . . . : siblingsite2.com
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : sibling.com
corp.com
Ethernet adapter smpdc1_nw:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : BASP Virtual Adapter
Physical Address. . . . . . . . . : 00-14-5E-2B-0D-88
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 172.20.24.2
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 172.20.24.5
DNS Servers . . . . . . . . . . . : 172.20.24.2
172.20.24.221

[SOLVED] Rad 7790+Catalyst = Error: unable to open display (null)

Radeon HD 7790 + Catalyst = Error: unable to open display (null)
Greetings,
I've installed Arch 2 days ago(migrated from Fedora), but I'm still a newbie to linux, so please have patience.
I've bought AMD Radeon HD 7790 recently and decided that it's time to upgrade system, but since then I had only problems with it. No LiveCD I tried (Fedora 20, Mint) worked properly in graphics mode, so I suspected problem in built-in drivers and moved to linux with text-only installation (Arch), so I could install drivers later.
I've followed wiki manual and installed catalyst, removed open source driver, added nomodeset parametr to GRUB etc. but I'm still stucked, because Xorg won't start(black screen and errors presented in Logs). Tried googling, but learned nothing except Radeon proprietary drivers are comparable to suicide.
Versions:
Kernel: 3-10.40-1-lts (catalyst_build_module sucessful)
Catalyst: 14.4-10
Xorg: 1.14.5-11
Logs&Configs:
lsmod
fglrx 8672295 0
amd_iommu_v2 7174 1 fglrx
button 4765 1 fglrx
fglrxinfo
Error: unable to open display (null)
Xorg.0.conf
[ 2632.576]
X.Org X Server 1.14.5
Release Date: 2013-12-12
[ 2632.594] X Protocol Version 11, Revision 0
[ 2632.600] Build Operating System: Linux 3.12.6-1-ARCH x86_64
[ 2632.606] Current Operating System: Linux localhost 3.10.40-1-lts #1 SMP Tue May 13 12:50:03 UTC 2014 x86_64
[ 2632.606] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-lts root=UUID=4f60e723-44e9-4264-8d6c-ca62c43cf69c rw quiet nomodeset
[ 2632.619] Build Date: 08 January 2014 01:35:51PM
[ 2632.629]
[ 2632.635] Current version of pixman: 0.32.4
[ 2632.646] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2632.646] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2632.671] (==) Log file: "/var/log/Xorg.0.log", Time: Sun May 25 00:53:45 2014
[ 2632.677] (==) Using config file: "/etc/X11/xorg.conf"
[ 2632.684] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 2632.690] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 2632.690] (==) ServerLayout "aticonfig Layout"
[ 2632.690] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 2632.690] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 2632.690] (**) | |-->Device "aticonfig-Device[0]-0"
[ 2632.690] (==) Automatically adding devices
[ 2632.690] (==) Automatically enabling devices
[ 2632.690] (==) Automatically adding GPU devices
[ 2632.690] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 2632.690] Entry deleted from font path.
[ 2632.690] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 2632.690] Entry deleted from font path.
[ 2632.690] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 2632.690] Entry deleted from font path.
[ 2632.690] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 2632.690] Entry deleted from font path.
[ 2632.690] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 2632.690] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 2632.690] Entry deleted from font path.
[ 2632.690] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 2632.690] (==) FontPath set to:
/usr/share/fonts/misc/
[ 2632.690] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2632.690] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 2632.690] (II) Loader magic: 0x7fac20
[ 2632.690] (II) Module ABI versions:
[ 2632.690] X.Org ANSI C Emulation: 0.4
[ 2632.690] X.Org Video Driver: 14.1
[ 2632.690] X.Org XInput driver : 19.1
[ 2632.691] X.Org Server Extension : 7.0
[ 2632.692] (--) PCI:*(0:2:0:0) 1002:665c:1458:226a rev 0, Mem @ 0xc0000000/268435456, 0xde800000/8388608, 0xdffc0000/262144, I/O @ 0x0000e800/256, BIOS @ 0x????????/131072
[ 2632.698] Initializing built-in extension Generic Event Extension
[ 2632.704] Initializing built-in extension SHAPE
[ 2632.710] Initializing built-in extension MIT-SHM
[ 2632.717] Initializing built-in extension XInputExtension
[ 2632.723] Initializing built-in extension XTEST
[ 2632.728] Initializing built-in extension BIG-REQUESTS
[ 2632.734] Initializing built-in extension SYNC
[ 2632.740] Initializing built-in extension XKEYBOARD
[ 2632.745] Initializing built-in extension XC-MISC
[ 2632.751] Initializing built-in extension SECURITY
[ 2632.756] Initializing built-in extension XINERAMA
[ 2632.761] Initializing built-in extension XFIXES
[ 2632.767] Initializing built-in extension RENDER
[ 2632.772] Initializing built-in extension RANDR
[ 2632.777] Initializing built-in extension COMPOSITE
[ 2632.782] Initializing built-in extension DAMAGE
[ 2632.787] Initializing built-in extension MIT-SCREEN-SAVER
[ 2632.792] Initializing built-in extension DOUBLE-BUFFER
[ 2632.797] Initializing built-in extension RECORD
[ 2632.802] Initializing built-in extension DPMS
[ 2632.806] Initializing built-in extension X-Resource
[ 2632.811] Initializing built-in extension XVideo
[ 2632.816] Initializing built-in extension XVideo-MotionCompensation
[ 2632.821] Initializing built-in extension XFree86-VidModeExtension
[ 2632.825] Initializing built-in extension XFree86-DGA
[ 2632.830] Initializing built-in extension XFree86-DRI
[ 2632.834] Initializing built-in extension DRI2
[ 2632.834] (II) "glx" will be loaded by default.
[ 2632.834] (II) LoadModule: "glx"
[ 2632.834] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2632.835] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 2632.835] compiled for 6.9.0, module version = 1.0.0
[ 2632.839] Loading extension GLX
[ 2632.839] (II) LoadModule: "fglrx"
[ 2632.839] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 2632.863] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 2632.863] compiled for 1.4.99.906, module version = 14.10.2
[ 2632.863] Module class: X.Org Video Driver
[ 2632.863] (II) Loading sub module "fglrxdrm"
[ 2632.863] (II) LoadModule: "fglrxdrm"
[ 2632.863] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 2632.863] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 2632.863] compiled for 1.4.99.906, module version = 14.10.2
[ 2632.863] (II) AMD Proprietary Linux Driver Version Identifier:14.10.2
[ 2632.864] (II) AMD Proprietary Linux Driver Release Identifier: 14.10.1006
[ 2632.864] (II) AMD Proprietary Linux Driver Build Date: Apr 17 2014 21:15:33
[ 2632.864] (--) using VT number 2
[ 2632.885] (WW) Falling back to old probe method for fglrx
[ 2632.899] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[ 2632.901] ukiDynamicMajor: found major device number 250
[ 2632.901] ukiDynamicMajor: found major device number 250
[ 2632.901] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 2632.901] ukiOpenDevice: node name is /dev/ati/card0
[ 2632.901] ukiOpenDevice: open result is 11, (OK)
[ 2632.901] ukiOpenByBusid: ukiOpenMinor returns 11
[ 2632.901] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 2632.904] (--) Chipset Supported AMD Graphics Processor (0x665C) found
[ 2632.904] (WW) fglrx: No matching Device section for instance (BusID PCI:0@2:0:1) found
[ 2632.905] (II) fglrx(0): pEnt->device->identifier=0x11bea10
[ 2632.905] (II) fglrx(0): === [xdl_xs114_atiddxPreInit] === begin
[ 2632.905] (II) Loading sub module "vgahw"
[ 2632.905] (II) LoadModule: "vgahw"
[ 2632.905] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 2632.905] (II) Module vgahw: vendor="X.Org Foundation"
[ 2632.906] compiled for 1.14.5, module version = 0.1.0
[ 2632.906] ABI class: X.Org Video Driver, version 14.1
[ 2632.906] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 2632.906] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 2632.906] (==) fglrx(0): Default visual is TrueColor
[ 2632.906] (**) fglrx(0): Option "DPMS" "true"
[ 2632.906] (==) fglrx(0): RGB weight 888
[ 2632.906] (II) fglrx(0): Using 8 bits per RGB
[ 2632.906] (==) fglrx(0): Buffer Tiling is ON
[ 2632.906] (II) Loading sub module "fglrxdrm"
[ 2632.906] (II) LoadModule: "fglrxdrm"
[ 2632.906] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 2632.906] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 2632.906] compiled for 1.4.99.906, module version = 14.10.2
[ 2632.908] ukiDynamicMajor: found major device number 250
[ 2632.908] ukiDynamicMajor: found major device number 250
[ 2632.908] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 2632.908] ukiOpenDevice: node name is /dev/ati/card0
[ 2632.908] ukiOpenDevice: open result is 13, (OK)
[ 2632.908] ukiOpenByBusid: ukiOpenMinor returns 13
[ 2632.908] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 2632.908] (**) fglrx(0): NoAccel = NO
[ 2632.909] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[ 2632.909] (--) fglrx(0): Chipset: "AMD Radeon HD 7700 Series" (Chipset = 0x665c)
[ 2632.909] (--) fglrx(0): (PciSubVendor = 0x1458, PciSubDevice = 0x226a)
[ 2632.909] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[ 2632.909] (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
[ 2632.909] (--) fglrx(0): MMIO registers at 0xdffc0000
[ 2632.909] (--) fglrx(0): I/O port at 0x0000e800
[ 2632.909] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 2632.909] (II) fglrx(0): AC Adapter is used
[ 2632.914] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 2632.914] (II) Loading sub module "vbe"
[ 2632.914] (II) LoadModule: "vbe"
[ 2632.915] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 2632.915] (II) Module vbe: vendor="X.Org Foundation"
[ 2632.915] compiled for 1.14.5, module version = 1.1.0
[ 2632.915] ABI class: X.Org Video Driver, version 14.1
[ 2632.915] (II) fglrx(0): VESA BIOS detected
[ 2632.915] (II) fglrx(0): VESA VBE Version 3.0
[ 2632.915] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 2632.915] (II) fglrx(0): VESA VBE OEM: AMD ATOMBIOS
[ 2632.915] (II) fglrx(0): VESA VBE OEM Software Rev: 15.32
[ 2632.915] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2010, Advanced Micro Devices, Inc.
[ 2632.915] (II) fglrx(0): VESA VBE OEM Product: BONAIRE
[ 2632.915] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 2632.915] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[ 2632.915] (--) fglrx(0): Video RAM: 2097152 kByte, Type: GDDR5
[ 2632.915] (II) fglrx(0): PCIE card detected
[ 2632.915] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 2632.915] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 2632.915] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf400000000, MCFBSize = 0x80000000)
[ 2632.915] (II) fglrx(0): RandR 1.2 support is enabled!
[ 2632.915] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 2632.915] (II) Loading sub module "fb"
[ 2632.915] (II) LoadModule: "fb"
[ 2632.916] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 2632.916] (II) Module fb: vendor="X.Org Foundation"
[ 2632.916] compiled for 1.14.5, module version = 1.0.0
[ 2632.916] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2632.916] (II) fglrx(0): EDID Management option: EDID Management is enabled
[ 2632.916] (II) Loading sub module "ddc"
[ 2632.916] (II) LoadModule: "ddc"
[ 2632.916] (II) Module "ddc" already built-in
[ 2633.034] (II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
[ 2633.034] (II) fglrx(0): Output DFP2 has no monitor section
[ 2633.034] (II) fglrx(0): Output DFP3 has no monitor section
[ 2633.034] (II) fglrx(0): Output DFP4 has no monitor section
[ 2633.034] (II) fglrx(0): Output DFP5 has no monitor section
[ 2633.034] (II) fglrx(0): Output DFP6 has no monitor section
[ 2633.034] (II) fglrx(0): Output DFP7 has no monitor section
[ 2633.034] (II) fglrx(0): Output CRT1 has no monitor section
[ 2633.034] (II) Loading sub module "ddc"
[ 2633.034] (II) LoadModule: "ddc"
[ 2633.034] (II) Module "ddc" already built-in
[ 2633.034] (II) fglrx(0): Connected Display0: CRT1
[ 2633.034] (II) fglrx(0): Display0 EDID data ---------------------------
[ 2633.034] (II) fglrx(0): Manufacturer: GSM Model: 4b31 Serial#: 78077
[ 2633.034] (II) fglrx(0): Year: 2007 Week: 7
[ 2633.034] (II) fglrx(0): EDID Version: 1.3
[ 2633.034] (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 2633.034] (II) fglrx(0): Sync: Separate Composite SyncOnGreen
[ 2633.034] (II) fglrx(0): Max Image Size [cm]: horiz.: 38 vert.: 30
[ 2633.034] (II) fglrx(0): Gamma: 2.20
[ 2633.034] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 2633.034] (II) fglrx(0): First detailed timing is preferred mode
[ 2633.034] (II) fglrx(0): redX: 0.639 redY: 0.342 greenX: 0.297 greenY: 0.615
[ 2633.034] (II) fglrx(0): blueX: 0.146 blueY: 0.068 whiteX: 0.313 whiteY: 0.329
[ 2633.034] (II) fglrx(0): Supported established timings:
[ 2633.034] (II) fglrx(0): 720x400@70Hz
[ 2633.034] (II) fglrx(0): 640x480@60Hz
[ 2633.034] (II) fglrx(0): 640x480@67Hz
[ 2633.034] (II) fglrx(0): 640x480@72Hz
[ 2633.034] (II) fglrx(0): 640x480@75Hz
[ 2633.034] (II) fglrx(0): 800x600@56Hz
[ 2633.034] (II) fglrx(0): 800x600@60Hz
[ 2633.034] (II) fglrx(0): 800x600@72Hz
[ 2633.034] (II) fglrx(0): 800x600@75Hz
[ 2633.034] (II) fglrx(0): 832x624@75Hz
[ 2633.034] (II) fglrx(0): 1024x768@60Hz
[ 2633.034] (II) fglrx(0): 1024x768@70Hz
[ 2633.034] (II) fglrx(0): 1024x768@75Hz
[ 2633.035] (II) fglrx(0): 1280x1024@75Hz
[ 2633.035] (II) fglrx(0): 1152x864@75Hz
[ 2633.035] (II) fglrx(0): Manufacturer's mask: 0
[ 2633.035] (II) fglrx(0): Supported standard timings:
[ 2633.035] (II) fglrx(0): #0: hsize: 640 vsize 480 refresh: 75 vid: 20273
[ 2633.035] (II) fglrx(0): #1: hsize: 800 vsize 600 refresh: 75 vid: 20293
[ 2633.035] (II) fglrx(0): #2: hsize: 1024 vsize 768 refresh: 75 vid: 20321
[ 2633.035] (II) fglrx(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 2633.035] (II) fglrx(0): Supported detailed timing:
[ 2633.035] (II) fglrx(0): clock: 108.0 MHz Image Size: 376 x 301 mm
[ 2633.035] (II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 2633.035] (II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 2633.035] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz
[ 2633.035] (II) fglrx(0): Monitor name: L1918S
[ 2633.035] (II) fglrx(0): Monitor name:
[ 2633.035] (II) fglrx(0): EDID (in hex):
[ 2633.035] (II) fglrx(0): 00ffffffffffff001e6d314bfd300100
[ 2633.035] (II) fglrx(0): 071101036e261e78eaa2a5a3574c9d25
[ 2633.035] (II) fglrx(0): 115054bfef80314f454f614f81800101
[ 2633.035] (II) fglrx(0): 010101010101302a009851002a403070
[ 2633.035] (II) fglrx(0): 1300782d1100001e000000fd00384b1e
[ 2633.035] (II) fglrx(0): 530e000a202020202020000000fc004c
[ 2633.035] (II) fglrx(0): 31393138530a202020202020000000fc
[ 2633.035] (II) fglrx(0): 00200a202020202020202020202000e7
[ 2633.035] (II) fglrx(0): End of Display0 EDID data --------------------
[ 2633.035] (II) fglrx(0): Dynamic Surface Resizing Enabled
[ 2633.036] (II) fglrx(0): EDID for output DFP1
[ 2633.036] (II) fglrx(0): EDID for output DFP2
[ 2633.036] (II) fglrx(0): EDID for output DFP3
[ 2633.036] (II) fglrx(0): EDID for output DFP4
[ 2633.036] (II) fglrx(0): EDID for output DFP5
[ 2633.036] (II) fglrx(0): EDID for output DFP6
[ 2633.036] (II) fglrx(0): EDID for output DFP7
[ 2633.036] (II) fglrx(0): EDID for output CRT1
[ 2633.036] (II) fglrx(0): Manufacturer: GSM Model: 4b31 Serial#: 78077
[ 2633.036] (II) fglrx(0): Year: 2007 Week: 7
[ 2633.036] (II) fglrx(0): EDID Version: 1.3
[ 2633.036] (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 2633.036] (II) fglrx(0): Sync: Separate Composite SyncOnGreen
[ 2633.036] (II) fglrx(0): Max Image Size [cm]: horiz.: 38 vert.: 30
[ 2633.036] (II) fglrx(0): Gamma: 2.20
[ 2633.036] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 2633.036] (II) fglrx(0): First detailed timing is preferred mode
[ 2633.036] (II) fglrx(0): redX: 0.639 redY: 0.342 greenX: 0.297 greenY: 0.615
[ 2633.036] (II) fglrx(0): blueX: 0.146 blueY: 0.068 whiteX: 0.313 whiteY: 0.329
[ 2633.036] (II) fglrx(0): Supported established timings:
[ 2633.036] (II) fglrx(0): 720x400@70Hz
[ 2633.036] (II) fglrx(0): 640x480@60Hz
[ 2633.036] (II) fglrx(0): 640x480@67Hz
[ 2633.036] (II) fglrx(0): 640x480@72Hz
[ 2633.036] (II) fglrx(0): 640x480@75Hz
[ 2633.036] (II) fglrx(0): 800x600@56Hz
[ 2633.036] (II) fglrx(0): 800x600@60Hz
[ 2633.036] (II) fglrx(0): 800x600@72Hz
[ 2633.036] (II) fglrx(0): 800x600@75Hz
[ 2633.036] (II) fglrx(0): 832x624@75Hz
[ 2633.037] (II) fglrx(0): 1024x768@60Hz
[ 2633.037] (II) fglrx(0): 1024x768@70Hz
[ 2633.037] (II) fglrx(0): 1024x768@75Hz
[ 2633.037] (II) fglrx(0): 1280x1024@75Hz
[ 2633.037] (II) fglrx(0): 1152x864@75Hz
[ 2633.037] (II) fglrx(0): Manufacturer's mask: 0
[ 2633.037] (II) fglrx(0): Supported standard timings:
[ 2633.037] (II) fglrx(0): #0: hsize: 640 vsize 480 refresh: 75 vid: 20273
[ 2633.037] (II) fglrx(0): #1: hsize: 800 vsize 600 refresh: 75 vid: 20293
[ 2633.037] (II) fglrx(0): #2: hsize: 1024 vsize 768 refresh: 75 vid: 20321
[ 2633.037] (II) fglrx(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 2633.037] (II) fglrx(0): Supported detailed timing:
[ 2633.037] (II) fglrx(0): clock: 108.0 MHz Image Size: 376 x 301 mm
[ 2633.037] (II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 2633.037] (II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 2633.037] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz
[ 2633.037] (II) fglrx(0): Monitor name: L1918S
[ 2633.037] (II) fglrx(0): Monitor name:
[ 2633.037] (II) fglrx(0): EDID (in hex):
[ 2633.037] (II) fglrx(0): 00ffffffffffff001e6d314bfd300100
[ 2633.037] (II) fglrx(0): 071101036e261e78eaa2a5a3574c9d25
[ 2633.037] (II) fglrx(0): 115054bfef80314f454f614f81800101
[ 2633.037] (II) fglrx(0): 010101010101302a009851002a403070
[ 2633.037] (II) fglrx(0): 1300782d1100001e000000fd00384b1e
[ 2633.037] (II) fglrx(0): 530e000a202020202020000000fc004c
[ 2633.037] (II) fglrx(0): 31393138530a202020202020000000fc
[ 2633.037] (II) fglrx(0): 00200a202020202020202020202000e7
[ 2633.037] (II) fglrx(0): Printing probed modes for output CRT1
[ 2633.037] (II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 2633.037] (II) fglrx(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "1280x960"x75.0 135.00 1280 1296 1440 1688 960 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1328 1440 1688 960 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "1280x768"x75.0 135.00 1280 1296 1440 1688 768 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "1280x768"x60.0 108.00 1280 1328 1440 1688 768 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "1280x720"x75.0 135.00 1280 1296 1440 1688 720 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "1280x720"x60.0 108.00 1280 1328 1440 1688 720 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "1024x768"x70.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "800x600"x72.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "640x480"x72.0 31.50 640 656 696 832 480 481 484 520 -hsync -vsync (37.9 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "640x480"x67.0 27.28 640 664 728 816 480 481 484 499 -hsync +vsync (33.4 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 2633.037] (II) fglrx(0): Output DFP1 disconnected
[ 2633.037] (II) fglrx(0): Output DFP2 disconnected
[ 2633.037] (II) fglrx(0): Output DFP3 disconnected
[ 2633.037] (II) fglrx(0): Output DFP4 disconnected
[ 2633.037] (II) fglrx(0): Output DFP5 disconnected
[ 2633.038] (II) fglrx(0): Output DFP6 disconnected
[ 2633.038] (II) fglrx(0): Output DFP7 disconnected
[ 2633.038] (II) fglrx(0): Output CRT1 connected
[ 2633.038] (II) fglrx(0): Using exact sizes for initial modes
[ 2633.038] (II) fglrx(0): Output CRT1 using initial mode 1280x1024
[ 2633.038] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 2633.038] (II) fglrx(0): DPI set to (96, 96)
[ 2633.038] (II) fglrx(0): Eyefinity capable adapter detected.
[ 2633.038] (II) fglrx(0): Adapter AMD Radeon HD 7700 Series has 6 configurable heads and 1 displays connected.
[ 2633.038] (==) fglrx(0): PseudoColor visuals disabled
[ 2633.038] (II) Loading sub module "ramdac"
[ 2633.038] (II) LoadModule: "ramdac"
[ 2633.038] (II) Module "ramdac" already built-in
[ 2633.038] (==) fglrx(0): NoDRI = NO
[ 2633.038] (==) fglrx(0): Capabilities: 0x00000000
[ 2633.038] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 2633.038] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 2633.038] (==) fglrx(0): UseFastTLS=0
[ 2633.038] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
[ 2633.038] (--) Depth 24 pixmap format is 32 bpp
[ 2633.038] Loading extension ATIFGLRXDRI
[ 2633.038] (II) fglrx(0): doing swlDriScreenInit
[ 2633.038] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 2633.039] ukiDynamicMajor: found major device number 250
[ 2633.039] ukiDynamicMajor: found major device number 250
[ 2633.039] ukiDynamicMajor: found major device number 250
[ 2633.039] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 2633.039] ukiOpenDevice: node name is /dev/ati/card0
[ 2633.039] ukiOpenDevice: open result is 14, (OK)
[ 2633.039] ukiOpenByBusid: ukiOpenMinor returns 14
[ 2633.039] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 2633.039] (II) fglrx(0): [uki] DRM interface version 1.0
[ 2633.039] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:2:0:0"
[ 2633.039] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x3c000
[ 2633.039] (II) fglrx(0): [uki] mapped SAREA 0x3c000 to 0x7f000fd0d000
[ 2633.039] (II) fglrx(0): [uki] framebuffer handle = 0x3d000
[ 2633.039] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 2633.039] (II) fglrx(0): swlDriScreenInit done
[ 2633.039] (II) fglrx(0): Kernel Module Version Information:
[ 2633.039] (II) fglrx(0): Name: fglrx
[ 2633.039] (II) fglrx(0): Version: 14.10.2
[ 2633.039] (II) fglrx(0): Date: Apr 17 2014
[ 2633.039] (II) fglrx(0): Desc: AMD FireGL DRM kernel module
[ 2633.039] (II) fglrx(0): Kernel Module version matches driver.
[ 2633.039] (II) fglrx(0): Kernel Module Build Time Information:
[ 2633.039] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.10.40-1-lts
[ 2633.039] (II) fglrx(0): Build-Kernel MODVERSIONS: yes
[ 2633.039] (II) fglrx(0): Build-Kernel __SMP__: yes
[ 2633.039] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 2633.039] (II) fglrx(0): [uki] register handle = 0x0003e000
[ 2633.040] (II) fglrx(0): DRI initialization successfull
[ 2633.040] (II) fglrx(0): FBADPhys: 0xf400000000 FBMappedSize: 0x01040000
[ 2633.041] (==) fglrx(0): Backing store disabled
[ 2633.041] Loading extension FGLRXEXTENSION
[ 2633.041] (**) fglrx(0): DPMS enabled
[ 2633.041] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 2633.041] (**) fglrx(0): Textured Video is enabled.
[ 2633.041] (II) LoadModule: "glesx"
[ 2633.042] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 2633.043] (II) Module glesx: vendor="X.Org Foundation"
[ 2633.043] compiled for 1.4.99.906, module version = 1.0.0
[ 2633.043] Loading extension GLESX
[ 2633.043] (II) fglrx(0): GLESX enableFlags = 8784
[ 2633.043] (II) fglrx(0): GLESX is enabled
[ 2633.043] (II) LoadModule: "amdxmm"
[ 2633.043] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 2633.043] (II) Module amdxmm: vendor="X.Org Foundation"
[ 2633.043] compiled for 1.4.99.906, module version = 2.0.0
[ 2633.055] Loading extension AMDXVOPL
[ 2633.055] Loading extension AMDXVBA
[ 2633.055] (II) fglrx(0): Enable composite support successfully
[ 2633.055] (WW) fglrx(0): Option "VendorName" is not used
[ 2633.055] (WW) fglrx(0): Option "ModelName" is not used
[ 2633.055] (II) fglrx(0): X context handle = 0x1
[ 2633.055] (II) fglrx(0): [DRI] installation complete
[ 2633.055] (==) fglrx(0): Silken mouse enabled
[ 2633.056] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 2633.056] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 2633.414] (--) RandR disabled
[ 2633.432] ukiDynamicMajor: found major device number 250
[ 2633.432] ukiDynamicMajor: found major device number 250
[ 2633.432] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 2633.432] ukiOpenDevice: node name is /dev/ati/card0
[ 2633.432] ukiOpenDevice: open result is 15, (OK)
[ 2633.432] ukiOpenByBusid: ukiOpenMinor returns 15
[ 2633.432] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 2633.432] (EE) AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory]
[ 2633.443] ukiDynamicMajor: found major device number 250
[ 2633.443] ukiDynamicMajor: found major device number 250
[ 2633.443] ukiDynamicMajor: found major device number 250
[ 2633.443] ukiOpenDevice: node name is /dev/ati/card0
[ 2633.443] ukiOpenDevice: open result is 16, (OK)
[ 2633.443] ukiGetBusid returned 'PCI:2:0:0'
[ 2633.443] ukiOpenDevice: node name is /dev/ati/card1
[ 2633.443] ukiOpenDevice: open result is -1, (No such device)
[ 2633.443] ukiOpenDevice: open result is -1, (No such device)
[ 2633.443] ukiOpenDevice: Open failed
[ 2633.443] ukiOpenDevice: node name is /dev/ati/card2
[ 2633.443] ukiOpenDevice: open result is -1, (No such device)
[ 2633.443] ukiOpenDevice: open result is -1, (No such device)
[ 2633.443] ukiOpenDevice: Open failed
[ 2633.443] ukiOpenDevice: node name is /dev/ati/card3
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: Open failed
[ 2633.444] ukiOpenDevice: node name is /dev/ati/card4
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: Open failed
[ 2633.444] ukiOpenDevice: node name is /dev/ati/card5
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: Open failed
[ 2633.444] ukiOpenDevice: node name is /dev/ati/card6
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: Open failed
[ 2633.444] ukiOpenDevice: node name is /dev/ati/card7
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: Open failed
[ 2633.444] ukiOpenDevice: node name is /dev/ati/card8
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: Open failed
[ 2633.445] ukiOpenDevice: node name is /dev/ati/card9
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: Open failed
[ 2633.445] ukiOpenDevice: node name is /dev/ati/card10
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: Open failed
[ 2633.445] ukiOpenDevice: node name is /dev/ati/card11
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: Open failed
[ 2633.445] ukiOpenDevice: node name is /dev/ati/card12
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: Open failed
[ 2633.445] ukiOpenDevice: node name is /dev/ati/card13
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.446] ukiOpenDevice: Open failed
[ 2633.446] ukiOpenDevice: node name is /dev/ati/card14
[ 2633.446] ukiOpenDevice: open result is -1, (No such device)
[ 2633.446] ukiOpenDevice: open result is -1, (No such device)
[ 2633.446] ukiOpenDevice: Open failed
[ 2633.446] ukiOpenDevice: node name is /dev/ati/card15
[ 2633.446] ukiOpenDevice: open result is -1, (No such device)
[ 2633.446] ukiOpenDevice: open result is -1, (No such device)
[ 2633.446] ukiOpenDevice: Open failed
[ 2633.446] ukiDynamicMajor: found major device number 250
[ 2633.446] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 2633.446] ukiOpenDevice: node name is /dev/ati/card0
[ 2633.446] ukiOpenDevice: open result is 16, (OK)
[ 2633.446] ukiOpenByBusid: ukiOpenMinor returns 16
[ 2633.446] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 2633.525] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[ 2633.526] ukiDynamicMajor: found major device number 250
[ 2633.526] ukiDynamicMajor: found major device number 250
[ 2633.526] ukiDynamicMajor: found major device number 250
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card0
[ 2633.526] ukiOpenDevice: open result is 17, (OK)
[ 2633.526] ukiGetBusid returned 'PCI:2:0:0'
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card1
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: Open failed
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card2
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: Open failed
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card3
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: Open failed
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card4
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: Open failed
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card5
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: Open failed
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card6
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: Open failed
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card7
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: Open failed
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card8
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: Open failed
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card9
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: Open failed
[ 2633.527] ukiOpenDevice: node name is /dev/ati/card10
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: Open failed
[ 2633.527] ukiOpenDevice: node name is /dev/ati/card11
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: Open failed
[ 2633.527] ukiOpenDevice: node name is /dev/ati/card12
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: Open failed
[ 2633.527] ukiOpenDevice: node name is /dev/ati/card13
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: Open failed
[ 2633.527] ukiOpenDevice: node name is /dev/ati/card14
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: Open failed
[ 2633.527] ukiOpenDevice: node name is /dev/ati/card15
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: Open failed
[ 2633.527] ukiDynamicMajor: found major device number 250
[ 2633.527] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 2633.527] ukiOpenDevice: node name is /dev/ati/card0
[ 2633.527] ukiOpenDevice: open result is 17, (OK)
[ 2633.527] ukiOpenByBusid: ukiOpenMinor returns 17
[ 2633.527] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 2633.546] (II) fglrx(0): OverDrive6 Detected!
[ 2633.551] (II) fglrx(0): Setting screen physical size to 338 x 270
[ 2633.594] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 2633.594] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2633.594] (II) LoadModule: "evdev"
[ 2633.595] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 2633.595] (II) Module evdev: vendor="X.Org Foundation"
[ 2633.595] compiled for 1.14.3, module version = 2.8.2
[ 2633.595] Module class: X.Org XInput Driver
[ 2633.595] ABI class: X.Org XInput driver, version 19.1
[ 2633.595] (II) Using input driver 'evdev' for 'Power Button'
[ 2633.595] (**) Power Button: always reports core events
[ 2633.595] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 2633.595] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2633.595] (--) evdev: Power Button: Found keys
[ 2633.595] (II) evdev: Power Button: Configuring as keyboard
[ 2633.595] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 2633.595] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 2633.595] (**) Option "xkb_rules" "evdev"
[ 2633.595] (**) Option "xkb_model" "pc104"
[ 2633.595] (**) Option "xkb_layout" "us"
[ 2633.634] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 2633.634] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2633.634] (II) Using input driver 'evdev' for 'Power Button'
[ 2633.634] (**) Power Button: always reports core events
[ 2633.634] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 2633.634] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2633.634] (--) evdev: Power Button: Found keys
[ 2633.634] (II) evdev: Power Button: Configuring as keyboard
[ 2633.634] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 2633.634] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 2633.634] (**) Option "xkb_rules" "evdev"
[ 2633.634] (**) Option "xkb_model" "pc104"
[ 2633.634] (**) Option "xkb_layout" "us"
[ 2633.635] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event1)
[ 2633.635] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 2633.635] (II) Using input driver 'evdev' for 'Logitech USB-PS/2 Optical Mouse'
[ 2633.635] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
[ 2633.635] (**) evdev: Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event1"
[ 2633.635] (--) evdev: Logitech USB-PS/2 Optical Mouse: Vendor 0x46d Product 0xc051
[ 2633.635] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
[ 2633.635] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
[ 2633.635] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found relative axes
[ 2633.635] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
[ 2633.635] (II) evdev: Logitech USB-PS/2 Optical Mouse: Configuring as mouse
[ 2633.635] (II) evdev: Logitech USB-PS/2 Optical Mouse: Adding scrollwheel support
[ 2633.635] (**) evdev: Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
[ 2633.635] (**) evdev: Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 2633.635] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input1/event1"
[ 2633.635] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE, id 8)
[ 2633.635] (II) evdev: Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
[ 2633.635] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
[ 2633.635] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
[ 2633.635] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
[ 2633.635] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
[ 2633.635] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
[ 2633.635] (II) No input driver specified, ignoring this device.
[ 2633.636] (II) This device may have been added with another device file.
[ 2633.636] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
[ 2633.636] (II) No input driver specified, ignoring this device.
[ 2633.636] (II) This device may have been added with another device file.
[ 2633.636] (II) config/udev: Adding input device HDA NVidia Line Out (/dev/input/event6)
[ 2633.636] (II) No input driver specified, ignoring this device.
[ 2633.636] (II) This device may have been added with another device file.
[ 2633.636] (II) config/udev: Adding input device HDA NVidia Line (/dev/input/event7)
[ 2633.636] (II) No input driver specified, ignoring this device.
[ 2633.636] (II) This device may have been added with another device file.
[ 2633.637] (II) config/udev: Adding input device HDA NVidia Rear Mic (/dev/input/event8)
[ 2633.637] (II) No input driver specified, ignoring this device.
[ 2633.637] (II) This device may have been added with another device file.
[ 2633.637] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=10 (/dev/input/event10)
[ 2633.637] (II) No input driver specified, ignoring this device.
[ 2633.637] (II) This device may have been added with another device file.
[ 2633.637] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=9 (/dev/input/event11)
[ 2633.637] (II) No input driver specified, ignoring this device.
[ 2633.637] (II) This device may have been added with another device file.
[ 2633.638] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=8 (/dev/input/event12)
[ 2633.638] (II) No input driver specified, ignoring this device.
[ 2633.638] (II) This device may have been added with another device file.
[ 2633.638] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=7 (/dev/input/event13)
[ 2633.638] (II) No input driver specified, ignoring this device.
[ 2633.638] (II) This device may have been added with another device file.
[ 2633.638] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event14)
[ 2633.638] (II) No input driver specified, ignoring this device.
[ 2633.638] (II) This device may have been added with another device file.
[ 2633.638] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=11 (/dev/input/event9)
[ 2633.639] (II) No input driver specified, ignoring this device.
[ 2633.639] (II) This device may have been added with another device file.
[ 2633.639] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 2633.639] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 2633.639] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 2633.639] (**) AT Translated Set 2 keyboard: always reports core events
[ 2633.639] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 2633.639] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 2633.639] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 2633.639] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 2633.639] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 2633.639] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 2633.639] (**) Option "xkb_rules" "evdev"
[ 2633.639] (**) Option "xkb_model" "pc104"
[ 2633.639] (**) Option "xkb_layout" "us"
[ 2633.640] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 2633.640] (II) No input driver specified, ignoring this device.
[ 2633.640] (II) This device may have been added with another device file.
[ 2635.885] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 2639.300] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 2639.300] (II) fglrx(0): Backup framebuffer data.
[ 2639.333] (II) fglrx(0): Backup complete.
[ 2653.729] (II) evdev: AT Translated Set 2 keyboard: Close
[ 2653.730] (II) UnloadModule: "evdev"
[ 2653.730] (II) evdev: Logitech USB-PS/2 Optical Mouse: Close
[ 2653.730] (II) UnloadModule: "evdev"
[ 2653.730] (II) evdev: Power Button: Close
[ 2653.730] (II) UnloadModule: "evdev"
[ 2653.730] (II) evdev: Power Button: Close
[ 2653.730] (II) UnloadModule: "evdev"
[ 2653.732] (II) fglrx(0): Shutdown CMMQS
[ 2653.735] (II) fglrx(0): [uki] removed 1 reserved context for kernel
[ 2653.735] (II) fglrx(0): [uki] unmapping 8192 bytes of SAREA 0x3c000 at 0x7f000fd0d000
[ 2653.735] (EE)
[ 2653.740] (EE) Backtrace:
[ 2653.745] (EE) 0: Xorg (xorg_backtrace+0x3d) [0x57e04d]
[ 2653.750] (EE) 1: Xorg (0x400000+0x181da9) [0x581da9]
[ 2653.754] (EE) 2: /usr/lib/libpthread.so.0 (0x7f000f1e8000+0xf4b0) [0x7f000f1f74b0]
[ 2653.759] (EE) 3: /usr/lib/libpciaccess.so.0 (0x7f000f406000+0x503e) [0x7f000f40b03e]
[ 2653.765] (EE) 4: /usr/lib/xorg/modules/drivers/fglrx_drv.so (amd_xs113_int10_x_inb+0x46) [0x7f000bb46126]
[ 2653.771] (EE) 5: /usr/lib/xorg/modules/drivers/fglrx_drv.so (0x7f000b15c000+0x9e2e05) [0x7f000bb3ee05]
[ 2653.776] (EE) 6: /usr/lib/xorg/modules/drivers/fglrx_drv.so (X86EMU_exec+0xa5) [0x7f000bb32555]
[ 2653.782] (EE) 7: /usr/lib/xorg/modules/drivers/fglrx_drv.so (amd_xs113_int10_xf86ExecX86int10+0x46) [0x7f000bb47286]
[ 2653.788] (EE) 8: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xf86ExecX86int10+0xd) [0x7f000b56897d]
[ 2653.793] (EE) 9: /usr/lib/xorg/modules/libvbe.so (VBESetVBEMode+0x9d) [0x7f000ab0163d]
[ 2653.799] (EE) 10: /usr/lib/xorg/modules/drivers/fglrx_drv.so (0x7f000b15c000+0x441623) [0x7f000b59d623]
[ 2653.805] (EE) 11: /usr/lib/xorg/modules/drivers/fglrx_drv.so (atiddxVBESetConsoleMode+0x44) [0x7f000b59d474]
[ 2653.811] (EE) 12: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xdl_xs114_atiddxFreeScreen+0x73e) [0x7f000b6ffc1e]
[ 2653.817] (EE) 13: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xdl_xs114_atiddxCloseScreen+0x321) [0x7f000b6ff241]
[ 2653.823] (EE) 14: /usr/lib/xorg/modules/drivers/fglrx_drv.so (0x7f000b15c000+0xa4a846) [0x7f000bba6846]
[ 2653.828] (EE) 15: Xorg (0x400000+0xc3136) [0x4c3136]
[ 2653.833] (EE) 16: Xorg (0x400000+0x106964) [0x506964]
[ 2653.838] (EE) 17: Xorg (0x400000+0x24cd7) [0x424cd7]
[ 2653.843] (EE) 18: /usr/lib/libc.so.6 (__libc_start_main+0xf0) [0x7f000e058000]
[ 2653.848] (EE) 19: Xorg (0x400000+0x24f0f) [0x424f0f]
[ 2653.857] (EE)
[ 2653.861] (EE) Segmentation fault at address 0x0
[ 2653.866] (EE)
Fatal server error:
[ 2653.874] (EE) Caught signal 11 (Segmentation fault). Server aborting
[ 2653.878] (EE)
[ 2653.883] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 2653.899] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 2653.904] (EE)
[ 2653.908] (EE) Server terminated with error (1). Closing log file.
xorg.conf
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:2:0:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
I'm sure that the main problem is between keyboard and chair, but I'd like to know, what's wrong with pc
Thanks for your efforts.
Last edited by Mytrin (2014-05-25 19:09:02)

I've managed to solve this error:
(EE) AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory
There was missing library and few directories, which I found according to this http://www.reddit.com/r/archlinux/comme … _correctly at /usr/lib/dri, so I had to just symlink it. However, "unable to open display" error is still annoying me and Xorg is not working.
EDIT: Found EE about missing commands in new Xorg.0.log and installed xterm to solve this. Now I don't have entirely black screen after startx. There is white rectangular terminal and fglrxinfo seems to be all right as it detected my Radeon and OpenGL. Now I have to install some DE, but that's another story. Marking as [SOLVED] and once again thanks to clfarron4 for reply.
Last edited by Mytrin (2014-05-25 19:06:09)

Unable to open iMovie project?

I made a simple iMovie 09 project and burned it to a DVD via iDVD.
Then, to save space on my HD, I moved the project to an external HD.
Now I want to go back to the project to make some edits.   But when took it out of the external HD and placed it on my desktop, I am unable to open it in iMovie.   I've tried simply clicking on the project icon as well as doing File>Import>Movie. I also tried clicking and dragging the movie icon from the desktop to iMovie with no luck. iMovie just doesn't see to want to recognize it.
Can someone help?   Thanks?

Hi
There are so many things to this.
A. Flash drive - I even don't know if they would ever work - very doubtful
B. External hard disks - MUST be Mac OS Extended (hfs) formatted -
UNIX/DOS/FAT32/Mac OS Exchange works for most other things BUT NOT FOR VIDEO no matter if iMovie, iDVD or FinalCut is used.
C. In the folder iMovie Projects - There are NO MOVIES - but text-documents related to the projects and this document points to the Raw material in iMovie Events folder and how it is supposed to be Played/Viewed in this particular project. e.g. play Clip A from 00:00:01:13 to 00:03:45:02 and so on. So there are no movies in the project folder.
D. So if both iMovie Events and iMovie Projects folder are copied over to an external hard disk - Then the iMovie in the second Mac has no links to this and will not find it.
SO to be able to work with one project on two Macs - all moving's of Events and Projects should be done within the iMovie Application - Not on DeskTop/Finder - do not alter or move any folder named
• iMovie Events
• iMovie Projects
on DeskTop/Finder - as they can mess-up and be very hard to impossible to mend.
Yours Bengt W

Unable to open project on different computer

Hi all,
I've got an interesting situation. I created a project on a Mac Pro, then used FCPX to consolidate media onto an external drive. Then, I realized that the "Organize Media" was needed to get all original files correctly located in the FCPX media folder, so I did that and the project would then open with my laptop (which I used as the test computer). Now, I handed the project over to another using a newer MBP than mine, and for some reason, he has been unable to open the project or even view the event media.
He's updated FCPX to 10.0.1, rebooted the computer, trashed FCP prefs, copied the Motion Templates to his Movies folder (I made a copy on the external drive as I have several templates for the project), and has done a permissions repair. All without change. The Mac Pro is a 2010 12-core running the latest version of Lion and my MBP test computer is running the latest version of Snow Leopard. His computer is running Snow Leopard.
Any ideas?
Thanks,
Lawrence

Tom was certainly right about the duplicate function being the best way to copy a project. However, the problem here was actually two-part. First, the editor did not tell me that he was able to see the project after updating to 10.0.1, but the project had missing media. He just said it still wasn't working.
Second, the missing media was only a result of him not properly copying the Motion Templates folder from the hard drive to his Movies folder.
Thanks to Tom for suggesting a better way to copy these projects, though! I think I'm going to use that, and Singlemizer to remove the duplicated files outside the "Original Media" folder to keep from building up duplicated media.
Lawrence

Unable to open PWA in browser and MSP on application server in project server 2007. ERROR: Sending the Soap message failed or no recognizable response was received.

Hi All,
I am using project server 2007 and WSS 3.0.
I have been facing a strange issue for couple of days. I am unable to open PWA in browser and MS Project Pro on application server.
Everything is correct whether it is URL or MS Project profile account on MSP. This is strange because i can open same PWA/MSP from other computers (Database server / Client PCs) but not locally on server.
When i try to connect to MSP on App server, i get the following errors in event viewer.
Event Type: Error
Event Source: MSSOAP
Event ID: 16
User: N/A
Computer: APP-Server-Name
Description:
Soap error: Connection time out..
Event Type: Error
Event Source: MSSOAP
Event Category: Client
Event ID: 16
User: N/A
Computer: APP-Server-Name
Description:
Soap error: An unanticipated error occurred during the processing of this request..
Event Type: Error
Event Source: MSSOAP
Event Category: Client
Event ID: 16
User: N/A
Computer: APP-Server-Name
Description: Soap error: Sending the Soap message failed or no recognizable response was received.
Event Type: Error
Event Source: MSSOAP
Event Category: Client
Event ID: 16
User: N/A
Computer: APP-Server-Name
Description:
Soap error: Unspecified client error..
One more issue i am facing and i guess that is related to above issue. The Issue is, when i am creating a new project, It's workspace gets created but doesn't get linked to the project and i can't link it manually because it already exists for the project.
sandeep

Hi Paul ,
Thanks for reply. The project server URL was already added to the Trusted
Sites/Local Intranet areas in IE.
sandeep

Unable to open iPhoto after upgrade to 9.1.3 (bought on apple store)

Hello all
I am unable to open my iPhoto after upgrading it with version 9.1.3 , bought in the apple store.
The searching icon never stops.
I trieded to synchro with my iPad (where I have a backup of all my pfoto's) but the system tells me that all photo's are still on my Mac.
Can someone help me out, because I am rather a rookie in this kind of things
regards
Waldo

Try this: launch iPhoto with the Option key held down and try to create a new, test library. If you can then then your library is the culprit.
If that's the case make a temporary, duplicate copy of your library (Finder ➙ File ➙ Duplicate) and apply the three fixes in order as necessary.
Fix #1
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your HD/User/Home()/ Library/Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your HD/User/Home()/Library /Caches/com.apple.iPhoto folder.
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
Fix #2
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #3
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

Recipients are unable to open my attachments.

Hi all,
First time posting so please excuse any misused terminology and the like. I'm having trouble with Mac Mail. I use iCloud mail for my service and I have my iCloud account connected to "Mail" on my iMac. I also have a Hotmail account connected to Mail that I occasionally use.
I recently tried to send a PDF to a Windows user using my iCloud account but they were unable to open the attachment. They could view the message fine and the attachment showed up but they were getting an error when they tried to open it. They also tried to save the attachment to their computer and then open it with no luck. When I took a look at the sent e-mail I was also unable to open the PDF. I was getting an error that read:
"Adobe Reader could not open 'Order Receipt.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an e-mail attachment and wasn't correctly decoded)."
So I tried again with another file type, this time it was a tiff image with similar issues. Still unable to open the file getting a different error message. I then tried using my Hotmail address as the sending e-mail account, still with no luck. I then was forced to use the Hotmail web site to send the mail and that worked fine, much to my chagrin. I then tried to send it via the web based version of iCloud which didn't seem to work from my end at first, I was unable to open the file by clicking on it, still receiving the same error message mentioned above but when I saved it to my downloads folder I was able to open it up clicking on the file from my downloads stack on the dock. Once it opened up this way I was also able to open it up by clicking on the file in the e-mail.
Upon further investigation, I noticed I was unable to open any attachments to an e-mail as soon as I attached them. When I attach a file by clicking and dragging the file into the e-mail, the icon shows up in the mail, which is strange because normally the attachments show up embedded in the e-mail, but when I click on them I get the error message and the file size for the attachment is 0KB. If I try to attach something using the paperclip icon at the top of the mail message a window opens up where I can select the file but when I select it and click "Choose File" the file selection window closes but nothing seems to have attached to the e-mail.
I've been researching this for a few days now and I've tried rebuilding my mailbox, to no avail.
Sorry if this is a little wordy but from what I've seen in forums, the more information you give on what you've done, the better.
Any clue what's going on?
Thanks in advance!

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below on this page to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -f -a TextEdit
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; sudo defaults read com.apple.loginwindow LoginHook; sudo crontab -l; } 2> /dev/null | open -f -a TextEdit
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
{ launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; crontab -l 2> /dev/null; } | open -f -a TextEdit
Step 4
ls -1A /e*/{la,mach}* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -f -a TextEdit
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' | open -f -a TextEdit
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

Office Web Apps returns "unable to open"

We have SharePoint 2013 with Office Web Apps 2013 SP1.
Recently, users started receiving errors after the "Word Web App" logo would present stating "unable to open". This occurred on anything (Excel Web App, etc..).
Observed the following Event on my Office Web Apps server in the Applications and Services Logs, Microsoft Office Web Apps Log
Log Name: Microsoft Office Web Apps
Source: Office Web Apps
Date: 4/9/2015 8:24:24 AM
Event ID: 8115
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: FQDN_WebAppsServerName
Description:
Could not contact WOPI End Point. Error details - 'FileNotFound url - <a href="https:///highschool/CUA/_vti_bin/wopi.ashx/files/f0b744b0a509477fad71b5c1c94891b2?access_token=eyJ0eXAiOiJKV1QiLCJhbGciOiJSUzI1NiIsIng1dCI6IjhCalNDdmJxVU9HNmc1bjN3SmJNeTVMV0dzcyJ9%2EeyJhdWQiOiJ3b3BpL2VjbGFzcy5lY3RzLm9yZ0BmZWQxN2JiMy1hYjc1LTRjZDktOTllOS02M2U1NGJjNDczM2UiLCJpc3MiOiIwMDAwMDAwMy0wMDAwLTBmZjEtY2UwMC0wMDAwMDAwMDAwMDBAZmVkMTdiYjMtYWI3NS00Y2Q5LTk5ZTktNjNlNTRiYzQ3MzNlIiwibmJmIjoiMTQyODU4MjI1NSIsImV4cCI6IjE0Mjg2MTgyNTUiLCJuYW1laWQiOiIwIy53fGhpZ2hzY2hvb2xcXGpzbWl0aDMyNjYiLCJuaWkiOiJtaWNyb3NvZnQuc2hhcmVwb2ludCIsImlzdXNlciI6InRydWUiLCJjYWNoZWtleSI6IjApLnd8cy0xLTUtMjEtMTQwOTA4MjIzMy0xMjc1MjEwMDcxLTE0MTcwMDEzMzMtMzk3NCIsImlzbG9vcGJhY2siOiJUcnVlIiwiYXBwY3R4IjoiZjBiNzQ0YjBhNTA5NDc3ZmFkNzFiNWMxYzk0ODkxYjI7Y1A4WDBHQUpKaW5PUExzUE1LNEpDR1ZxSDlZPTtEZWZhdWx0Ozs3RkZGRkZGRkZGRkZGRkZGO1RydWUifQ%2EN2jimetPSQcG%5Fl%5FdZR98KJUrlTXJLlGxvMoYGxNu2pGLr%2DWsv2Ir7%2DV3R0RHROUr8wqhSBSvX63qgEJF6thk7ODRv3hOp8SoMrM8PM08vhbaXVb15GTbSoQIC%2D1xnp4QAcVaLlIUpWRHnL5zNOno%5FRoqxmIa8uRGi24neCGUqAn6lne3kQHfzxneVwAR8U%5FvjYlgk2dA%5FzUaU0jB3DqQTfW5xjO0T2E0e42WNcuVCTLs0SYbtNXz5uljXtRQrtZKJl4%2DIWkgQgk1y7dLxS%2DvBTgTLrEBX9qJcJxqFX%2DEh6Ojk4yEURtAa581z0rWCBRPnRdHjwMU7iT4AT1BFsPLzA&access_token_ttl=1428618255865'">https://<fqdn_Sharepoint_ServerName>/highschool/CUA/_vti_bin/wopi.ashx/files/f0b744b0a509477fad71b5c1c94891b2?access_token=eyJ0eXAiOiJKV1QiLCJhbGciOiJSUzI1NiIsIng1dCI6IjhCalNDdmJxVU9HNmc1bjN3SmJNeTVMV0dzcyJ9%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%2EN2jimetPSQcG%5Fl%5FdZR98KJUrlTXJLlGxvMoYGxNu2pGLr%2DWsv2Ir7%2DV3R0RHROUr8wqhSBSvX63qgEJF6thk7ODRv3hOp8SoMrM8PM08vhbaXVb15GTbSoQIC%2D1xnp4QAcVaLlIUpWRHnL5zNOno%5FRoqxmIa8uRGi24neCGUqAn6lne3kQHfzxneVwAR8U%5FvjYlgk2dA%5FzUaU0jB3DqQTfW5xjO0T2E0e42WNcuVCTLs0SYbtNXz5uljXtRQrtZKJl4%2DIWkgQgk1y7dLxS%2DvBTgTLrEBX9qJcJxqFX%2DEh6Ojk4yEURtAa581z0rWCBRPnRdHjwMU7iT4AT1BFsPLzA&access_token_ttl=1428618255865'.
I ran Update-SPWOPIProofKey on the SharePoint Server; and it has seemed to fix it.
Trying to recall past events; in January we installed the latest Web Apps updates; and while troubleshooting this issue; I did as well; install the most recent Web Apps updates KB2956158.
We use the Remove-OfficeWebAppsMachine and subsequently New-OfficeWebAppsFarm each time we apply the updates. Our environment is stand-alone. One Exchange Server, One SharePoint Server, One Office Web Apps Server.
Any insight is appreciated.
Technology Administrator Erie County (Career and) Technical School.

Hi,
From your description, my understanding is that you got an error when you opened documents.
Please install Microsoft .NET Framework 4.5.2, compare the result.
More information, please refer to the link:
http://blogs.technet.com/b/justin_gao/archive/2014/12/19/troubleshooting-error-event-id-8115-when-you-install-office-web-apps-server-2013-on-windows-server-2012-r2.aspx
Thanks,
Wendy
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Unable to open jsp file in Design mode

Hi,
I am unable to open jsp files in design mode, I am using eclipse Version: 3.6.1.
Please help.
Regards,
Ale Hasan

Hi Ale,
Thank you for the additional information. Unfortunately, there does not seem to be anything unusual about your project based on your description. I'm surprised you don't see any processes listed in the process view while waiting for the page to open. I thought you might see something related to a queue manager job to "Manage Resource Event Jobs".
Are there any messages in the error.log? You can open a view to the error log from the menu option, "Window -> Show View -> Error Log". I'm curious if there are any messages about a process timing out, unable to reset some object within a certain time, or any exceptions logged.
If you change to another workspace with just a single JSF web project containing a smaller number of JSP, do you experience the same behavior?
Can you also try using a more recent release of OEPE to see if that helps? The 11.1.1.6.1 release is about a year old.
http://www.oracle.com/technetwork/developer-tools/eclipse/downloads/index.html
Kind regards,
Carlin

Unable to open event

Similar Messages

Maybe you are looking for