Unable to open file (CurrentVersion.fcpproject) HELP!!

I just bought and downloaded the latest version of FinalCutProX last week. I have been working with my school group on a video in class, and somebody made me a copy of the rough cut so I could work on the music. I cannot open it! The filename is CurrentVersion.fcpproject. When I click on it, I get a message to 'open within FinalCutPro.' In FinalCutPro, I have tried importing and opening media and opening XML. In every option, my file is grayed out so I cannot open it. HELP!!!! The project is due tomorrow!

The event is the folder that contains all the media. You need the media to open thje project file, which is useless without the clips. Probably the best thing is to get the media on a hard drive and then point the project to the right event folder. If the event folder is on a hard drive in a folder called Final Cut Events you can reconnect it. If the project doesn't see the media, open project properties Cmd-J and use the button at the bottom of the panel to point the project to the event where the media is.

Similar Messages

PLEASE HELP! Unable to render any Quicktime format - after effects error unable to open file (-1610153459)

I just can't render any type of Quicktime file in AE CC 2014. I'm on Windows 8.1.
Even in CS6 was it not possible, but I never really used any Quicktime filetypes.
Normally I just rendered to .h264, but now that's only available via the insane slow Adobe Media Encoder, I want to use the Quicktime -> h.264 option, but it's just not possible.
I also want to render some footage to the Avid DNxHD codec, but this is also not possible.
Doesn't matter what type of footage, dslr footage, pictures, AE solids. Everytime I want to render in a Quicktime file I get this error:
AE error: Rendering error while writing to file (File-Location). Unable to open file. (-1610153459)
Installed the latest Windows version of Quicktime, didn't help...
I saw some topics about this, but they didn't provide a good solution. All they discussed was the hardware of the computer. I have enough space available and render to a NTFS drive.
Please can someone help me with this!

Yes! I just solved my own problem. I still think that the internet doesn't provide an easy to find answer, so I will post this.
I had the latest version of Quicktime, but this version causes the problem. After some searching I finally found a page on the Apple website that confirms this.
Updating to QuickTime 7.4 may cause issues while rendering footage in Adobe After Effects - Apple Support
So I uninstalled my latest version of Quicktime and installed version 7.4.1. Everything works now the way it's supposed to!

HELP - Partition Error Unable to open file (c:\TEMP\ESS00001.tmp)

While tryint to create a partion that we have in 5.02p14 to 6.2.1, I receive the error during validation. any ideas?Unable to open file (c:\temp\ess00001.tmp).When I go to c:\temp directory, I can see the files but they are empty.Please Help.Thanks, Paul J.

we've gotten this message in essbase 5.02 patch 13 when updating the partitions if there was an error when saving. i think it happens because essbase only partially updated the partition definition file so when you try to save it again, it looks for the temp file. the best way i found to fix this is to delete the .ddb (not .dbb) file from both source and target databases. this will delete any partition you already have existing on the database though.

Unsolved: unable to open file because it isn't a valid Keynote document

I'm trying to open a presentation I made some time ago, it is a .key file I used to open without any problems. Now the message appears:
"Unable to open file because it isn't a valid Keynote document".
I tried the solution described here, but it didn'd work: i change extension to .zip, unzip it and there is no index file. There are only pictures from the presentation in .tiff
I also sent the file to my friends and they had the same problem opening it. It's very strange, I've successfully opened it before. And the problem is only with THIS file!
Please help me out!

Have you tried to create a new Keynote Presentation? Do you have another previously saved Keynote file you can try to open? These will make sure it is a problem with this specific presentation and not the whole program.
Try to delete the Keynote Preferences. They are located in the folder Macintosh HD>Users>your username>Library>Preferences and titled com.apple.iWork.Keynote.plist.
Your profile shows that you are still on Mc OS 10.6.6, is that true? You might try to update to 10.6.7 as I believe that there was a font issue fixed in this update (I don't know for sure since I am still on 10.5.8).
Try those and report back and we will see what we can come up with.

Error 'Unable to open file' when downloading SAP Query to Excel

Hi all
I'm running a SAP Query which is set to download straight to a spreadsheet (Pivot Table / Microsoft Excel). Intermittently it does not work - apparently at random (at least, I've can't recreate the error at will).
It does one of the following:
- Works ok, and creates the pivot table
- Gives an Excel error message 'Unable to open file', then returns to the 'save the data in a spreadsheet' popup when enter is pressed on the error.
- Does not issue error message, just goes to the 'save the data in a spreadsheet' popup.
In the last two cases, the excel pivot table sheet is not created.
Has anyone seen anything similar, or have any idea as to what is causing the problem?
Any help gratefully received!
Not urgent as I've found a way round - further testing seems to show that I don't get the error is Excel is already open - but in the past I've run many SAP query downloads without needing to open Excel first. I suppose it's possible that this is just something to do with the Excel setup at the user site
Message was edited by:
E Gregory

Hi,
Ensure that file name with same name and in same path should not be open while saving the data.
Award if it helps.
Jogdand M B

URGENT - Error "Unable to open file because it isn't a valid Keynote document" - and there is no index file (so the usually suggested solution doesn't work)

Hi there,
As you see in the heading, I am getting the error "Unable to open file because it isn't a valid Keynote document". There has been a number of threads on this and there seems to be a usual work around that works in many cases, by changing the file extension to .zip and then looking for the index file and making some more extension changes...unfortunately, in my case (and it also happened to others), there is no index file, so the usually suggested solution doesn't work...Can someone please help? I am working on a tight deadline and would like to try and recover the file.
Thanks a lot in advance.
Best,
Just a regular apple user
PS: any other presentation opens fine in Keynote (09)

Have you tried to create a new Keynote Presentation? Do you have another previously saved Keynote file you can try to open? These will make sure it is a problem with this specific presentation and not the whole program.
Try to delete the Keynote Preferences. They are located in the folder Macintosh HD>Users>your username>Library>Preferences and titled com.apple.iWork.Keynote.plist.
Your profile shows that you are still on Mc OS 10.6.6, is that true? You might try to update to 10.6.7 as I believe that there was a font issue fixed in this update (I don't know for sure since I am still on 10.5.8).
Try those and report back and we will see what we can come up with.

REP-110: Unable to open file

9iAS report server has been configured.
There is Infrastructure & Business Intelligence Forms home is on same server.
When i try to run the demo url from web browser :
http://<FQDN server>:8888/reports/rwservlet?destype=cache&desformat=PDF&report=Inventory_Report.rdf&userid=scott/tiger@iasdb1
its giving the error as:
REP-110: Unable to open file 'Inventory_Report.rdf'.
REP-1070: Error while opening or saving a document.
REP-0110: Unable to open file 'Inventory_Report.rdf'.
Tried giving full path also But No Luck!
The file is existing in the proper given path with required permissions.
Can somebody help me.. If any configuration related help, path setting ??

I have had issues with reports failing to run. My solution was to change settings on the Report App server. I changed the engine parameters to:
initial engines=2
maximum engines=5
minimum engines =2
maximum job before shutdown (englife)=1
maximum idle before shutdown=30
JVM Option= -Xms512m -Xmx512m
When in the report App server, you should see a page with settings similar to above. Make sure you try these settings in the test environment first (you can change them around then to see what works best).
Edited by: E Slazyk on Nov 20, 2009 3:03 PM

REP-0110: Unable to open file 'OCL_MASTER_REPORT'

Job Name: OCL_RXCRCLRC_73
Job Status:
Terminated with Error :
BACKGROUND is deprecated. See help for more information. REP-0110: Unable to open file 'OCL_MASTER_REPORT'. REP-1070: Error while opening or saving a document. REP-0110: Unable to open file 'OCL_MASTER_REPORT'.
Anybody met with the same situation? Thanks.
DBMS: oracle 9.2.0.3.0
Report Server: Oracle 9iDS

PS:
Oracle Clinical Version: 4.5

Adobe creative suite cs5: unable to open files in photoshop. unable to drag objects on illustrator..

Adobe creative suite cs5: unable to drag objects on illustrator or indesign. unable to open files in photoshop, brush doesnt work in photoshop.
In the past I uninstalled adobe creative suite cs5 from my laptop, used the adobe creative cloud cleanup tool, restarted and then reinstalled the programs and everything worked again for about a week. Now everything has gone back to the way it was again and this time the uninstalling and reinstalling isnt helping.
Any ideas?
Im pretty desperate!!
Thanks
Alisa

Hi Alisa
I'm having exactly the same problem. Uninstalled CS4 and reinstalled the 30 day trial of the Creative Cloud and it's stil having the same glitches, not opening in photoshop and not being able to drag/move objects in Illustrator or inDesign.
Did you find a solution to this problem?
Thanks
Jenny

Golden gate - Unable to open file (error 2, The system cannot find the file specified.)

Hi Everyone.
I have configured GoldenGate on Win2008 R2, but when I start replicat, this fall.
Initially:
GGSCI (WIN-NKC50KUIT0G) 19> start replicat rep1
Sending START request to MANAGER ...
REPLICAT REP1 starting
GGSCI (WIN-NKC50KUIT0G) 20> info all
Program     Status      Group       Lag at Chkpt Time Since Chkpt
MANAGER     RUNNING
REPLICAT    STOPPED     REP1        00:00:00      00:37:53
GGSCI (WIN-NKC50KUIT0G) 21> info replicat rep1
REPLICAT   REP1      Initialized   2013-11-02 22:23   Status STOPPED
Checkpoint Lag       00:00:00 (updated 00:40:28 ago)
Log Read Checkpoint File C:\app\Oracle\product\gg\dirdat\tr000000
                     2013-11-02 22:23:55.000000
With VIEW GGSEVT:
2013-11-02 23:15:31 INFO    OGG-01815 Oracle GoldenGate Delivery for Oracle, R
EP1.prm: Virtual Memory Facilities for: COM
    anon alloc: MapViewOfFile anon free: UnmapViewOfFile
    file alloc: MapViewOfFile file free: UnmapViewOfFile
    target directories:
    C:\app\Oracle\product\gg\dirtmp.
2013-11-02 23:15:31 ERROR   OGG-00446 Oracle GoldenGate Delivery for Oracle, R
EP1.prm: Extract file not found or no records beyond begin time.   why???
2013-11-02 23:15:31 ERROR   OGG-01668 Oracle GoldenGate Delivery for Oracle, R
EP1.prm: PROCESS ABENDING.
After I tried with:
GGSCI (WIN-NKC50KUIT0G) 8>Alter rep1, EXTSEQNO 0
but
GGSCI (WIN-NKC50KUIT0G) 9> info all
Program     Status      Group       Lag at Chkpt Time Since Chkpt
MANAGER     RUNNING
REPLICAT    ABENDED     REP1        00:00:00      01:11:50
why??? abended??
In logs:
2013-11-03 14:07:02 INFO    OGG-00996 Oracle GoldenGate Delivery for Oracle, REP1.prm: REPLICAT REP1 started.
2013-11-03 14:07:02 ERROR   OGG-01091 Oracle GoldenGate Delivery for Oracle, REP1.prm: Unable to open file ".\dirdat\tr000000" (error 2, The system cannot find the file specified.). why???
2013-11-03 14:07:02 ERROR   OGG-01668 Oracle GoldenGate Delivery for Oracle, REP1.prm: PROCESS ABENDING.
GGSCI (WIN-NKC50KUIT0G) 12> info rep1, detail
REPLICAT   REP1      Last Started 2013-11-03 14:30   Status ABENDED
Checkpoint Lag       00:00:00 (updated 01:19:03 ago)
Log Read Checkpoint File .\dirdat\tr000000
                     First Record
Extract Source                          Begin             End
.\dirdat\tr000000                       * Initialized *   First Record
.\dirdat\tr000000                       * Initialized *   First Record
.\dirdat\tr000000                       * Initialized *   First Record
.\dirdat\tr000000                       * Initialized *   First Record
.\dirdat\tr000000                       * Initialized *   First Record
.\dirdat\tr000000                       * Initialized *   First Record
.\dirdat\tr000000                       * Initialized *   First Record
.\dirdat\tr000000                       * Initialized *   2013-11-03 12:54
Current directory    C:\app\Oracle\product\gg
Report file          C:\app\Oracle\product\gg\dirrpt\REP1.rpt
Parameter file       C:\app\Oracle\product\gg\dirprm\REP1.prm
Checkpoint file      C:\app\Oracle\product\gg\dirchk\REP1.cpr
Checkpoint table     target.checkpoint
Process file         C:\app\Oracle\product\gg\dirpcs\REP1.pcr
Error log            C:\app\Oracle\product\gg\ggserr.log
GGSCI (WIN-NKC50KUIT0G) 13> view param rep1
REPLICAT rep1
ASSUMETARGETDEFS
USERID target, PASSWORD oracle
discardfile .\discard\rep1_discard.txt, append, megabytes 10
DDL
map source.*, target target.*;
I don´t understand it, How I could solve?? Please help me!
Thank you.

What steps did you use to add the Replicat? Can you list those commands out.
Also, does this file actually exist on the server where Replicat is running: C:\app\Oracle\product\gg\dirdat\tr000000

E63 Adobe LE error 'unable to open file"

Hi!
I've bought an E63 six months ago and recently I've purchased a memory card.
After a few days I wasn't anymore able to open any pdf, either from the phone's memory, or the memory card.
I receive this error: "unable to open file!"
If I try to open the Adobe PDF executable file nothing happens.
Any suggestions?

Hi,
Ensure that file name with same name and in same path should not be open while saving the data.
Award if it helps.
Jogdand M B

Unable to open file D:/ucm/data/users/userdb.txt

Dear All
I have installed oracle UCM server on my windows server 2003 system and when i tried to log in throught http://localhost/idc I got this error:
Access denied to UCM Server managed resource. Error loading credentials from master cache. Unable to open file D:/ucm/data/users/userdb.txt.
I checked the path above and I didnt find the file userdb.txt, it might be something wrong in installation
Im just a beginner who doesnt have much knowladge in the field, I followed detailed steps I found on club-Oracle website ( http://www.club-oracle.com/forums/installing-stellent-or-oracle-universal-content-management-t170/)
I appreciate any help from you.
Regards

actually I was loging here to say that I found errors in the log file, the error seems to be related to DB connection problems, these are the errors in m,y log file:
ERROR:     Unable to create database connection for the database 'InstallerDatabase' with connection string 'jdbc:oracle:thin:@localhost:1521:home'. Please make sure that the connection string, user and password are correct.
Listener refused the connection with the following error:
ORA-12505, TNS:listener does not currently know of SID given in connect descriptor The Connection descriptor used by the client was: localhost:1521:home
ERROR:     Unable to create database connection for the database 'InstallerDatabase' with connection string 'jdbc:oracle:thin:@localhost:1521:home'. Please make sure that the connection string, user and password are correct
Listener refused the connection with the following error:
ORA-12505, TNS:listener does not currently know of SID given in connect descriptor The Connection descriptor used by the client was: localhost:1521:home
ERROR:     Unable to create database tables. You will have to create them manually
error:
ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
The Connection descriptor used by the client was:
localhost:1521:home
WARNING:     Unable to publish user database.
WARNING:     Unable to register with Administration Server

Unable to open file "NULL\.EXT" - default sizes assumed for initial extents

Dear Friends i am trying to install IDES 4.6C on Windows 2000 Advance server + MSSQL2000 this error i am facing during installation all of the installation files are on my D:\ drive following is the structure.
D:\DBExport\DB
D:\DBExport\Data
D:\DBExport\LABEL.ASC
and kernal also on D:\ drive.
this is the error number one which i got
Error: DBR3LOADEXEC_NT_MSS R3loadPrepare 2 722
Child exited with error: rc = 2
child_pid = 1
See logfile SAPAPPL2.log for further information
and here is the associated log file.
#START OF LOG: 20060123112519
R3load version @(#) $Id: //bas/46D/src/ins/R3load/R3load.c#12 $ SAP
R3load -fast -i SAP0000.cmd -p SAP0000.log
start of syntax check ###
end of syntax check ###
#START: 20060123112520
error message: No such file or directory
(GOS) WARNING: Unable to open file "NULL\.EXT" - default sizes assumed for initial extents
(OLD) ERROR: CREATE statement failed for object "D010L"
     (CREATE TABLE "D010L" ( "PROG" VARCHAR(40) NOT NULL ,
"R3STATE" VARCHAR(1) NOT NULL , "R3MODE" VARCHAR(1) NOT NULL ,
"R3VERSION" VARCHAR(4) NOT NULL , "MACH" SMALLINT NOT NULL ,
"BLOCKNR" TINYINT NOT NULL , "BLOCKLG" DECIMAL(5,0) NOT NULL ,
"BLOCK" IMAGE NULL )
exec sp_bindefault 'str_default','D010L.PROG'
exec sp_bindefault 'str_default','D010L.R3STATE'
exec sp_bindefault 'str_default','D010L.R3MODE'
exec sp_bindefault 'str_default','D010L.R3VERSION'
exec sp_bindefault 'num_default','D010L.MACH'
exec sp_bindefault 'num_default','D010L.BLOCKNR'
exec sp_bindefault 'num_default','D010L.BLOCKLG'
DbSlExecute: rc = 106
(SQL error 2714)
error message returned by DbSl:
There is already an object named 'D010L' in the database.
#STOP: 20060123112520
#START OF LOG: 20060123152536
R3load version @(#) $Id: //bas/46D/src/ins/R3load/R3load.c#12 $ SAP
R3load -fast -i SAP0000.cmd -p SAP0000.log -r
start of syntax check ###
end of syntax check ###
trying to restart import ###
(RIM) INFO: table "D010L" dropped
restart finished ###
#START: 20060123152552
error message: No such file or directory
(GOS) WARNING: Unable to open file "NULL\.EXT" - default sizes assumed for initial extents
(IMP) TABLE: "D010L"
#Trying to create primary key "D010L~0"
(IMP) PRKEY: "D010L~0"
(OLD) ERROR: CREATE statement failed for object "D010LINF"
     (CREATE TABLE "D010LINF" ( "PROG" VARCHAR(40) NOT NULL ,
"R3STATE" VARCHAR(1) NOT NULL , "R3MODE" VARCHAR(1) NOT NULL ,
"R3VERSION" VARCHAR(4) NOT NULL , "MACH" SMALLINT NOT NULL ,
"R3RELEASE" VARCHAR(4) NOT NULL , "R3MODIFY" INT NOT NULL ,
"UNAM" VARCHAR(12) NOT NULL , "UDAT" VARCHAR(8) NOT NULL ,
"UTIME" VARCHAR(6) NOT NULL , "L_DATALG" INT NOT NULL ,
"Q_DATALG" INT NOT NULL , "Y_DATALG" INT NOT NULL , "SDAT" VARCHAR(8) NOT NULL ,
"STIME" VARCHAR(6) NOT NULL )
exec sp_bindefault 'str_default','D010LINF.PROG'
exec sp_bindefault 'str_default','D010LINF.R3STATE'
exec sp_bindefault 'str_default','D010LINF.R3MODE'
exec sp_bindefault 'str_default','D010LINF.R3VERSION'
exec sp_bindefault 'num_default','D010LINF.MACH'
exec sp_bindefault 'str_default','D010LINF.R3RELEASE'
exec sp_bindefault 'num_default','D010LINF.R3MODIFY'
exec sp_bindefault 'str_default','D010LINF.UNAM'
exec sp_bindefault 'str_default','D010LINF.UDAT'
exec sp_bindefault 'str_default','D010LINF.UTIME'
exec sp_bindefault 'num_default','D010LINF.L_DATALG'
exec sp_bindefault 'num_default','D010LINF.Q_DATALG'
exec sp_bindefault 'num_default','D010LINF.Y_DATALG'
exec sp_bindefault 'str_default','D010LINF.SDAT'
exec sp_bindefault 'str_default','D010LINF.STIME'
DbSlExecute: rc = 106
(SQL error 2714)
error message returned by DbSl:
There is already an object named 'D010LINF' in the database.
#STOP: 20060123152556
#START OF LOG: 20060123154952
R3load version @(#) $Id: //bas/46D/src/ins/R3load/R3load.c#12 $ SAP
R3load -fast -i SAP0000.cmd -p SAP0000.log -r
start of syntax check ###
end of syntax check ###
trying to restart import ###
(RIM) INFO: table "D010LINF" dropped
restart finished ###
#START: 20060123154955
(IMP) TABLE: "D010LINF"
#Trying to create primary key "D010LINF~0"
(IMP) PRKEY: "D010LINF~0"
(OLD) ERROR: CREATE statement failed for object "D010Q"
     (CREATE TABLE "D010Q" ( "PROG" VARCHAR(40) NOT NULL ,
"R3STATE" VARCHAR(1) NOT NULL , "R3MODE" VARCHAR(1) NOT NULL ,
"R3VERSION" VARCHAR(4) NOT NULL , "MACH" SMALLINT NOT NULL ,
"BLOCKNR" TINYINT NOT NULL , "BLOCKLG" DECIMAL(5,0) NOT NULL ,
"BLOCK" IMAGE NULL )
exec sp_bindefault 'str_default','D010Q.PROG'
exec sp_bindefault 'str_default','D010Q.R3STATE'
exec sp_bindefault 'str_default','D010Q.R3MODE'
exec sp_bindefault 'str_default','D010Q.R3VERSION'
exec sp_bindefault 'num_default','D010Q.MACH'
exec sp_bindefault 'num_default','D010Q.BLOCKNR'
exec sp_bindefault 'num_default','D010Q.BLOCKLG'
DbSlExecute: rc = 106
(SQL error 2714)
error message returned by DbSl:
There is already an object named 'D010Q' in the database.
#STOP: 20060123154956
#START OF LOG: 20060123162918
R3load version @(#) $Id: //bas/46D/src/ins/R3load/R3load.c#12 $ SAP
R3load -fast -i SAP0000.cmd -p SAP0000.log -r
start of syntax check ###
end of syntax check ###
trying to restart import ###
(RIM) INFO: table "D010Q" dropped
restart finished ###
#START: 20060123162920
(IMP) TABLE: "D010Q"
#Trying to create primary key "D010Q~0"
(IMP) PRKEY: "D010Q~0"
(IMP) ERROR: CREATE statement failed for object "D010Y"
     (CREATE TABLE "D010Y" ( "PROG" VARCHAR(40) NOT NULL ,
"R3STATE" VARCHAR(1) NOT NULL , "R3MODE" VARCHAR(1) NOT NULL ,
"R3VERSION" VARCHAR(4) NOT NULL , "MACH" SMALLINT NOT NULL ,
"BLOCKNR" TINYINT NOT NULL , "BLOCKLG" DECIMAL(5,0) NOT NULL ,
"BLOCK" IMAGE NULL )
exec sp_bindefault 'str_default','D010Y.PROG'
exec sp_bindefault 'str_default','D010Y.R3STATE'
exec sp_bindefault 'str_default','D010Y.R3MODE'
exec sp_bindefault 'str_default','D010Y.R3VERSION'
exec sp_bindefault 'num_default','D010Y.MACH'
exec sp_bindefault 'num_default','D010Y.BLOCKNR'
exec sp_bindefault 'num_default','D010Y.BLOCKLG'
DbSlExecute: rc = 106
(SQL error 2714)
error message returned by DbSl:
There is already an object named 'D010Y' in the database.
#STOP: 20060123162921
I am really struck with the installation any help will be highly appreciated.
best regards,
Zeeshan

Hi:
It seemed to me that you put the wrong directory or drive when started the installation. It shows "error message: No such file or directory" when trying to locate the files.
You can try to verify your inputs during first phase of the installation.
Hope this helps!
Best Regards,
Federico G. Babelis
NetWeaver Certified Consultant
http://www.gazum.com

Unable to open files ive downloaded

Model #: IQ546t
Product #: VA284AV-ABA
Serial #: {Removed for privacy}
Software Build #: 93NAv6PcA5
Service ID #: 092-209
PCBRAND: Pavilion
Windows Vista 32-bit
I'm unable to open files i've downloaded. ok, i'm trying to open silverlight_x64.exe to get my netflix to ply again. but when i right click on the file the opan is not in bold black. its gray. can someone please help me?

Assign those files to open with TextEdit.

ASO Custom Calc -Error-1241109 :Unable to open file

Hi,
I am trying to implement ASO custom Calc in version 11.1.2.1 ,using following Version DataCopy script in Maxl Editor
In POV i have included 1 set of base level member from each dimension just for testing purpose.
TestScript.csc Content : [Final] := [Working_0] ;
execute calculation on database 'EFXBASE'.'EFXBASE' with
local script_file "/Oracle/Middleware/user_projects/achd1rka001/EssbaseServer/essbaseserver1/app/EFXBASE/EFXBASE/TestScript.csc"
POV
"Crossjoin({[FXEXP]},Crossjoin({[Jan]},Crossjoin({[FY06]},Crossjoin({[CH_None]},Crossjoin({[PJ_None]},Crossjoin({[PD_None]},Crossjoin({[CC_0300]},
Crossjoin({[0004]},Crossjoin({[CurrFcst]},Crossjoin({[Local]},Crossjoin({[ICP_None]},{[LSTB]})))))))))))"
SourceRegion
"[Working_0]" ;
I am getting following error on execution of above script
Unable to open file ['/Oracle/Middleware/user_projects/achd1rka001/EssbaseServer/essbaseserver1/app/EFXBASE/EFXBASE/TestScript.csc']
Custom Calculation terminated with Essbase error 1241109
what could be the reason .. I have tried using '//' or '\' in file path but still getting same error.

Can you post your script. (change " to ' in POV and SourceRegion section)
Regards
Celvin
http://www.orahyplabs.com
*Please mark the responses as helpful/correct if applicable*

Unable to open file (CurrentVersion.fcpproject) HELP!!

Similar Messages

Maybe you are looking for